Currently, newlib does not declare strsignal if DEFS_H is defined,
ostensibly to work around a gdb bug. However, gdb itself compiles
even with this ifndef removed, and this makes sim (another part of
gdb) fail to compile.
Since it is not clear exactly what issue this was working around,
this patch just replaces that ifdef with the correct check,
i.e. __POSIX_VISIBLE >= 200809.
Reported by prodisDown:
In picolibc/newlib/libc/string/strrchr.c
if (i) { while ((s=strchr(s, i))) { last = s; s++; } } else { last = strchr(s, i); }
Value (for example 0xFFFFFF00) in if (i) can pass test and
then be typecasted to char inside strchr(). Then s++ and then
buffer overrun.
It can be fixed by preventive typecast i = (int) (char) i; or
typecasting inside expression if ((char) i).
Fixed by casting to char.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add specialized rotations RB_RED_ROTATE_LEFT() and RB_RED_ROTATE_RIGHT() which
may be used if we rotate a red child which has a black sibling. Such a red
node must have at least two child nodes so that the following red-black tree
invariant is fulfilled:
Every path from a given node to any of its descendant NULL nodes goes through
the same number of black nodes.
PARENT
/ \
BLACK RED
/ \
BLACK BLACK
Add specialized rotations RB_PARENT_ROTATE_LEFT() and RB_PARENT_ROTATE_RIGHT()
which may be used if the parent node exists and the direction of the child is
known. The specialized rotations are derived from RB_ROTATE_LEFT() and
RB_ROTATE_RIGHT() where the RB_SWAP_CHILD() was replaced by a simple
assignment.
In RB_GENERATE_REMOVE_COLOR() simplify a chain of conditions of the following
pattern
if (x) {
...
} else if (!x) {
...
}
to
if (x) {
...
} else {
...
}
We have
#define RB_ISRED(elm, field) \
((elm) != NULL && RB_COLOR(elm, field) == RB_RED)
So, the RB_ISRED() contains an implicit check for NULL. In
RB_GENERATE_REMOVE_COLOR() the "elm" pointer cannot be NULL in the while
condition. Use RB_COLOR(elm) == RB_BLACK instead.
There are a few files that are tied to the GNU simulator, so add myself
to match the general sim project.
Also add myself to the general write-after-approval since I've been doing
that for a long time now anyways :).
When newlib is configured with --enable-newlib-reent-check-verify,
the assert macro is already defined in the nano-mallocr.c compile unit.
Contributed by STMicroelectronics
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@st.com>
libm/machine/i386/f_ldexp.S:30: Warning: no instruction mnemonic suffix given and no register operands; using default for `fild'
libm/machine/i386/f_ldexpf.S:30: Warning: no instruction mnemonic suffix given and no register operands; using default for `fild'
fix this by adding the l mnemonic suffix
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
unused function warning for two_way_short_needle,
different char type warnings for standard string functions
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
_STDIO_WITH_THREAD_CANCELLATION_SUPPORT was never defined.
Include ../stdio/local.h to get the right definition per target.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
__STDINT_EXP() is provided by newlib but not by stdint-gcc.h. stdint-gcc.h
is used when the GCC argument -ffreestanding is used and this results in this
file not compiling.
This patch to the libc/machine/nvptx port of newlib implements an
approximation of "clock" and provides some additional stub routines.
These changes not only reduce the number of (link) failures in the GCC
testsuite when targeting nvptx-none, but also allow the NIST scimark4
benchmark to compile and run without modification.
newlib already contains support for backends to provide their own
clock implementations via -DCLOCK_PROVIDED. That functionality is
used here to return an approximate elapsed time based on the NVidia
GPU's clock64 cycle counter. Although not great, this is better than
the current behaviour of link error from the unresolved symbol
_times_r.
The other part of the patch is to add a small number of stub functions
to nvptx's misc.c. Adding isatty, for example, resolves linking
problems in libc from the dependency in __smakebuf_r, and the sync
stub, for example, fixes the failure with GCC's
testsuite/gfortran.dg/ISO_Fortran_binding_14.f90 [which simply tests
that gfortran can call a/any C function].
newlib/
configure.host: Add -DCLOCK_PROVIDED to newlib_cflags on nvptx*.
newlib/libc/machine/nvptx
Makefile.am: Add clock.c to lib_a_SOURCES.
clock.c: New source file to implement/approximate clock().
misc.c: Add stubs for fstat, isatty, open, sync and unlink.
_strtod_l as well as the gethex function both fetch the decimal point
from the current LC_NUMERIC locale info. This pulls in _C_numeric_locale
unconditionally even on targets not supporting locales at all.
Another problem is that strtod.c and gdtoa-gethex.c are ELIX 1, while
locale information in general isn't. This leads to potential build
breakage on bare metal targets.
Fix this by setting the decimal point to "." on all targets not
defining __HAVE_LOCALE_INFO__.
While at it, const'ify the entire local decimal point info in the
affected functions.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
svfwscanf replaces getwc and ungetwc_r. The comments in the code talk
about avoiding file operations, but they also need to bypass the
mbtowc calls as svfwscanf operates on wchar_t, not multibyte data,
which is a more important reason here; they would not work correctly
otherwise.
The ungetwc replacement has code which uses the 3 byte FILE _ubuf
field, but if wchar_t is 32-bits, this field is not large enough to
hold even one wchar_t value. Building in this mode generates warnings
about array overflow:
In file included from ../../newlib/libc/stdio/svfiwscanf.c:35:
../../newlib/libc/stdio/vfwscanf.c: In function '_sungetwc_r.isra':
../../newlib/libc/stdio/vfwscanf.c:316:12: warning: array subscript 4294967295 is above array bounds of 'unsigned char[3]' [-Warray-bounds]
316 | fp->_p = &fp->_ubuf[sizeof (fp->_ubuf) - sizeof (wchar_t)];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../../newlib/libc/stdio/stdio.h:46,
from ../../newlib/libc/stdio/vfwscanf.c:82,
from ../../newlib/libc/stdio/svfiwscanf.c:35:
../../newlib/libc/include/sys/reent.h:216:17: note: while referencing '_ubuf'
216 | unsigned char _ubuf[3]; /* guarantee an ungetc() buffer */
| ^~~~~
However, the vfwscanf code *never* ungets data before the start of the
scanning operation, and *always* ungets data which matches the input
at that point, so the code always hits the block which backs up over
the input data and never hits the block which uses the _ubuf field.
In addition, the svfwscanf code will always start with the unget
buffer empty, so the ungetwc replacement never needs to support an
unget buffer at all.
Simplify the code by removing support for everything other than
backing up over the input data, leaving the check to make sure it
doesn't get underflowed in case the vfscanf code has a bug in it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Added function prototypes to newlib/libc/include/pthread.h
for the following Issue 8 Standard APIs:
pthread_cond_clockwait()
pthread_mutex_clocklock()
pthread_rwlock_clockrdlock()
pthread_rwlock_clockwrlock()
A recent patch introduced new code for sig2str/str2sig.
This code does not properly exclude code that requires
SIGRTMIN/SIGRTMAX to be defined and triggers the following
compile error:
newlib/libc/signal/sig2str.c:199:8: error: 'SIGRTMIN' undeclared
newlib/libc/signal/sig2str.c:200:29: error: 'SIGRTMAX' undeclared
Let's add the missing guards.
Fixes: 2b50ec0cd2 ("libc: Fix compilation for new sig2str/str2sig implementation")
Signed-off-by: Christoph Muellner <cmuellner@gcc.gnu.org>
Added implementations for sig2str() and str2sig() in libc/signal
in order to improve POSIX compliance. Added fucntion prototypes
in libc/include/sys/signal.h.
riscv64-unknown-elf-g++-11.1.0 regression suite reports the following
failures for
$ make check-gcc-c++ RUNTESTFLAGS='dg.exp=Wstringop-overflow-6.C'
```
FAIL: g++.dg/warn/Wstringop-overflow-6.C -std=gnu++14 (test for excess errors)
FAIL: g++.dg/warn/Wstringop-overflow-6.C -std=gnu++17 (test for excess errors)
FAIL: g++.dg/warn/Wstringop-overflow-6.C -std=gnu++2a (test for excess errors)
UNSUPPORTED: g++.dg/warn/Wstringop-overflow-6.C -std=gnu++98
```
The "excess errors" being
```
output is In file included from /home/maxim/prj/riscv-upstream/install/riscv64-unknown-elf/include/wchar.h:6,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/cwchar:44,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/bits/postypes.h:40,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/iosfwd:40,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/ios:38,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/ostream:38,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/iostream:39,
from /home/maxim/prj/riscv-upstream/gcc-11.1.0/gcc/testsuite/g++.dg/warn/Wstringop-overflow-6.C:6:
/home/maxim/prj/riscv-upstream/install/riscv64-unknown-elf/include/sys/reent.h:685:11: warning: unnecessary parentheses in declaration of '_sig_func' [-Wparentheses]
```
cc Aldy Hernandez <aldyh@redhat.com> and Andrew MacLeod <amacleod@redhat.com>,
they are author of new VRP analysis for GCC, just to make sure I didn't
mis-understanding or mis-interpreting anything on GCC site.
GCC 11 have better value range analysis, that give GCC more confidence
to perform more aggressive optimization, but it cause scalbn/scalbnf get
wrong result.
Using scalbn to demostrate what happened on GCC 11, see comments with VRP
prefix:
```c
double scalbn (double x, int n)
{
/* VRP RESULT: n = [-INF, +INF] */
__int32_t k,hx,lx;
...
k = (hx&0x7ff00000)>>20;
/* VRP RESULT: k = [0, 2047] */
if (k==0) {
/* VRP RESULT: k = 0 */
...
k = ((hx&0x7ff00000)>>20) - 54;
if (n< -50000) return tiny*x; /*underflow*/
/* VRP RESULT: k = -54 */
}
/* VRP RESULT: k = [-54, 2047] */
if (k==0x7ff) return x+x; /* NaN or Inf */
/* VRP RESULT: k = [-54, 2046] */
k = k+n;
if (k > 0x7fe) return huge*copysign(huge,x); /* overflow */
/* VRP RESULT: k = [-INF, 2046] */
/* VRP RESULT: n = [-INF, 2100],
because k + n <= 0x7fe is false, so:
1. -INF < [-54, 2046] + n <= 0x7fe(2046) < INF
2. -INF < [-54, 2046] + n <= 2046 < INF
3. -INF < n <= 2046 - [-54, 2046] < INF
4. -INF < n <= [0, 2100] < INF
5. n = [-INF, 2100] */
if (k > 0) /* normal result */
{SET_HIGH_WORD(x,(hx&0x800fffff)|(k<<20)); return x;}
if (k <= -54) {
/* VRP OPT: Evaluate n > 50000 as true...*/
if (n > 50000) /* in case integer overflow in n+k */
return huge*copysign(huge,x); /*overflow*/
else return tiny*copysign(tiny,x); /*underflow*/
}
k += 54; /* subnormal result */
SET_HIGH_WORD(x,(hx&0x800fffff)|(k<<20));
return x*twom54;
}
```
However give the input n = INT32_MAX, k = k+n will overflow, and then we
expect got `huge*copysign(huge,x)`, but new VRP optimization think
`n > 50000` is never be true, so optimize that into `tiny*copysign(tiny,x)`.
so the solution here is to moving the overflow handle logic before `k = k + n`.
- GCC will set __FLT_EVAL_METHOD__ to 16 if __fp16 supported, e.g.
cortex-a55/aarch64.
- $ aarch64-unknown-elf-gcc -v 2>&1 |grep version
gcc version 9.2.0 (GCC)
- $ aarch64-unknown-elf-gcc -E -dM -mcpu=cortex-a55 - < /dev/null |grep FLT_EVAL_METHOD
#define __FLT_EVAL_METHOD__ 16
#define __FLT_EVAL_METHOD_TS_18661_3__ 16
#define __FLT_EVAL_METHOD_C99__ 16
- The behavior of __FLT_EVAL_METHOD__ == 16 is same as
__FLT_EVAL_METHOD__ == 0 except for float16_t, but newlib didn't
support float16_t.
ISO/IEC TS 18661-3:
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2405.pdf
V2 Changes:
- List Howland, Craig D as co-author since he provide the draft of comment
in math.h.
Co-authored-by: "Howland, Craig D" <howland@LGSInnovations.com>
The C standard says that errno may acquire the value ERANGE if the
result from strtod underflows. According to IEEE 754, underflow occurs
whenever the value cannot be represented in normalized form.
Newlib is inconsistent in this, setting errno to ERANGE only if the
value underflows to zero, but not for denorm values, and never for hex
format floats.
This patch attempts to consistently set errno to ERANGE for all
'underflow' conditions, which is to say all values which are not
exactly zero and which cannot be represented in normalized form.
This matches glibc behavior, as well as the Linux, Mac OS X, OpenBSD,
FreeBSD and SunOS strtod man pages.
Signed-off-by: Keith Packard <keithp@keithp.com>
The scanf code was skipping the '0' after the 'x' causing the
resulting buffer to contain an invalid number when passed to strtod.
Signed-off-by: Keith Packard <keithp@keithp.com>
- compiler is sometimes optimizing out the rounding check in
e_sqrt.c and ef_sqrt.c which uses two constants to create
an inexact operation
- there is a similar constant operation in s_tanh.c/sf_tanh.c
- make the one and tiny constants volatile to stop this
Newlib for aarch64 uses libgloss for the backend. One common libgloss
implementation is the 'rdimon' implementation, which uses the Arm
Semihosting protocol. In order to support a remote host that runs on
Windows we need to know whether a file is to be opened in binary or
text mode. That means that we need to preserve this information via
O_BINARY until we know what the libgloss binding will be.
This patch simply copies the arm implementation from sys/arm/sys and
puts it in machine/aarch64/sys, because we don't have a 'sys' subtree
on aarch64.
The only reason why it is tough for us to use nano malloc
is because of the small shortcoming where nano_malloc()
splits a bigger chunk from the free list into two pieces
while handing back the second one (the tail) to the user.
This is error prone and especially bad for smaller heaps,
where nano malloc is supposed to be superior. The normal
malloc doesn't have this issue and we need to use it even
though it costs us ~2k bytes compared to nano-malloc.
The problem arise especially after giving back _every_
malloced memory to the heap and then starting to exercise
the heap again by allocating something small. This small
item might split the whole heap in two equally big parts
depending on how the heap has been exercised before.
I have uploaded the smallest possible application
(only tested on ST and Nordic devices) to show the issue
while the real customer applications are far more complicated:
https://drive.google.com/file/d/1kfSC2KOm3Os3mI7EBd-U0j63qVs8xMbt/view?usp=sharing
The application works like the following pseudo code,
where we assume a heap of 100 bytes
(I haven't taken padding and other nitty and gritty
details into account. Everything to simplify understanding):
void *ptr = malloc(52); // We get 52 bytes and we have
// 48 bytes to use.
free(ptr); // Hand back the 52 bytes to nano_malloc
// This is the magic line that shows the issue of
// nano_malloc
ptr = malloc(1); // Nano malloc will split the 52 bytes
// in the free list and hand you a pointer
// somewhere in the
// middle of the heap.
ptr2 = malloc(52); // Out of memory...
I have done a fix which hands back the first part of the
splitted chunk. Once this is fixed we obviously
have the 1 byte placed in position 0 of the heap instead
of somewhere in the middle.
However, this won't let us malloc 52 new bytes even though
we potentially have 99 bytes left to use in the heap. The
reason is that when we try to do the allocation,
nano-malloc looks into the free list and sees a 51 byte
chunk to be used.
This is not big enough so nano-malloc decides to call
sbrk for _another_ 52 bytes which is not possible since
there is only 48 bytes left to ask for.
The solution for this problem is to check if the last
item in the free list is adjacent to sbrk(0). If it is,
as it is in this case, we can just ask sbrk for the
remainder of what is needed. In this case 1 byte.
NB! I have only tested the solution on our ST device.
Use the more official fesetenv(FE_DFL_ENV) from _dll_crt0, thus
allowing to drop the _feinitialise declaration from fenv.h.
Provide a no-op _feinitialise in Cygwin as exportable symbol for really
old applications when _feinitialise was called from mainCRTStartup in
crt0.o.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Drop the Cygwin-specific fenv.cc and fenv.h file and use the equivalent
newlib functionality now, so we have at least one example of a user for
this new mechanism.
fenv.c: allow _feinitialise to be called from Cygwin startup code
fenv.h: add declarations for fegetprec and fesetprec for Cygwin only.
Fix a comment.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Add a directory libc/machine/shared_x86 to share header files
between ix86 and x86_64 architectures.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far the build mechanism in newlib only allowed to either define
machine-specific headers, or headers shared between all machines.
In some cases, architectures are sufficiently alike to share header
files between them, but not with other architectures. A good example
is ix86 vs. x86_64, which share certain traits with each other, but
not with other architectures.
Introduce a new configure variable called "shared_machine_dir". This
dir can then be used for headers shared between architectures.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Christian Biesinger via Newlib
Keith Packard
Sebastian Huber
Mike Frysinger
Corinna Vinschen
Joel Sherrill
Roger Sayle
Matt Joyce
Christoph Muellner
Maxim Blinov
Alex White
Kito Cheng
Thomas Wolff
Jonathan Wakely
Dimitar Dimitrov
Jeff Johnston
Richard Earnshaw
Ola Olsson
Ties Stuij
David Macek