* libc/stdio/vfscanf.c (__svfscanf_r): For floating point conversion,
count all characters used to create number against maximum width.
* libc/machine/powerpc/vfscanf.c (__svfscanf_r): Ditto.
* libc/include/sys/h8300hms/crt0.S[__SIMULATOR__]: Add commandline
support.
* configure.host (h8300*-*-*): Added comment regarding -D__SIMULATOR__
flag to support simulator only extensions.
* libc/include/stdio.h: Change definition of fpos_t to fulfill
Cygwin 64bit file access requirements.
Drop definition of f*64() functions when compiled for Cygwin.
* libc/include/sys/config.h: Define __LARGE64_FILES for Cygwin.
* libc/reent/lseek64r.c: Use _off64_t instead of off64_t.
* libc/stdio64/local64.h: Use _fpos64_t instead of fpos64_t.
* acinclude.m4 (--disable-newlib-supplied-syscalls): New configuration
option to allow disabling of syscalls being supplied in newlib.
* aclocal.m4: Regenerated.
* configure: Ditto.
* configure.host: Add support of new configuration option and add
-D__NO_SYSCALLS__ if newlib supplied syscalls are disabled.
* doc/aclocal.m4: Regenerated.
* doc/configure: Ditto.
* libc/*aclocal.m4: Ditto.
* libc/*configure: Ditto.
* libm/*aclocal.m4: Ditto.
* libm/*configure: Ditto.
* libc/sys/arm/Makefile.am: Don't build syscalls.o if new option
is disabled.
* libc/sys/arm/Makefile.in: Regenerated.
* libc/stdio/vsprintf.c (vsprintf, _vsprintf_r): Set _file fd to
-1 to be sure it cannot later match a valid file fd causing
isatty() to return 1.
* libc/stdio/asprintf.c (asprintf, _asprintf_r): Ditto.
* libc/stdio/sprintf.c (sprintf, _sprintf_r): Ditto.
* libc/stdio/vasprintf.c (vasprintf, _vasprintf_r): Ditto.
* libc/stdlib/ldtoa.c (_ldtoa_r): Fix code to allocate the format
buffer based on the precision, after we have processed the input value
in a local buffer and know its relative magnitude.
* libc/sys/h8300hms/_exit.c (_exit, __exit): Slip a magic cookie
into registers r1 and r2, so that the simulator can distinguish
this trap from a breakpoint trap. Copied from libgloss.
* libc/sys/rtems/include/limits.h, libc/sys/rtems/sys/param.h,
libc/sys/rtems/sys/syslimits.h: Update to be in sync with what
constants are defined in each file in the shared versions in
libc/include.
* libc/sys/rtems/crt0.c: Define extra symbols on SH and HP-PA to
autoconf can link programs.
* libc/include/machine/types.h: Explicitly specify signed on
intXX_t types to ensure they are signed.
* configure.host: Support long double I/O for x86-linux.
* libc/stdlib/ldtoa.c (_ldtoa_r): Fix code to allocate a buffer
large enough to hold formatted result.
* libc/machine/powerpc/simdldtoa.c (_simdldtoa_r): Ditto.
* libc/include/sys/config.h: Change setting of INT_MAX
and UINT_MAX, to use __INT_MAX__ for __H8300__, __H8300H__,
__H8300S__. Also consolidate flag settings for these
platforms.
* libc/include/stdlib.h (strtof): New prototype (from C99).
(strtodf): Changed from prototype to macro which redefines
to strtof.
* libc/stdlib/atof.c: Change documentation to refer to strtof
instead of strtodf.
* libc/stdlib/atoff.c (atoff): Change to call strtof instead of
strtodf.
* libc/stdlib/strtod.c (strtodf): Renamed to strtof.
(strtof): New function.
* libm/test/convert.c (test_strtodf): Renamed to test_strtof which
calls strtof.
* configure.in: Change check for libc/include in ${CC} to
use an intermediate value so as to work with different shells.
* configure: Regenerated.
* Makefile.in: Ditto.
* libc/machine/h8300/setjmp.S (setjmp, longjmp): Combine common
code for __H8300H__ and __H8300S__. Also return 32-bit return code
when -mint32 is used.
* testsuite/lib/passfail.exp (newlib_pass_fail): Changed to
only issue one pass/fail message for a compile/link/execute.
* testsuite/newlib.elix/elix.exp: New file.
* testsuite/newlib.elix/tmmap.c: Ditto.
* libc/sys/rtems/machine: New directory.
* libc/sys/rtems/machine/limits.h, libc/sys/rtems/machine/param.h,
libc/sys/rtems/sys/param.h, libc/sys/rtems/sys/syslimits.h,
libc/sys/rtems/sys/utime.h: New files added to make *-rtems newlib
targets more BSD like when installed without requiring files to
be overwritten at install point when RTEMS itself is installed.
* Makefile.am: Pick up system dependent machine .h files such as
might be found on a BSD-ish system.
* Makefile.in: Regenerate.
* libc/include/machine/types.h: When on an RTEMS target, define a
few BSD flavor types.
* testsuite/include/check.h: New header file to use with
test cases.
* testsuite/lib/newlib.exp: Add testsuite/include directory
to list of header files to use.
* testsuite/newlib.wctype/twctype.c: New test case for iswctype fns.
* testsuite/newlib.wctype/wctype.exp: New file.
* libc/machine/hppa/DEFS.h, libc/machine/hppa/pcc_prefix.s,
libc/machine/hppa/setjmp.S, libc/machine/hppa/DEFS.h: Make this
compile with current GNU tools.
Add myself to write-after-approval section of MAINTAINERS file.
* libc/sys/sysnecv850/crt0.S (start): Delete v850 code for initializing
the ctbp register.
* libc/ctype/jp2uc.c: Change to use multiple arrays in jp2uc.h.
Also convert to EUCJP before using arrays. For values not in
the conversion arrays, return WEOF.
* libc/ctype/jp2uc.h: Change from one array to a number of
arrays to account for the fact that the originating table
is not contiguous for the input values since some are invalid.
* configure.host: Minor comment and formatting changes.
* libc/Makefile.am: Add libc_la_DEPENDENCIES.
* libc/Makefile.in: Regenerated.
* libc/include/sys/config.h: Minor format change.
* libc/posix/opendir.c (opendir): Change code to check
for HAVE_FCNTL before calling fcntl.
* libc/search/hash.c (hash_open): Ditto.
* libc/search/hash_page.c (open_tmp): Ditto.
* libc/reent/Makefile.am: Add fcntlr.c.
* libc/reent/Makefile.in: Regenerated.
* libc/reent/fcntlr.c: New file.
* libc/stdio/fdopen.c (_fdopen_r): Change to call _fcntl_r
instead of _fcntl when HAVE_FCNTL flag is set.
* libc/syscalls/sysfcntl.c (fcntl): Check for HAVE_FCNTL flag
to see if _fcntl or _fcntl_r should be called. If flag is not
set, default to ENOSYS stub.
* libc/include/wchar.h (mbstate_t): Change protective flag to
be _MBSTATE_T.
* libc/include/sys/_types.h (_mbstate_t): Remove protective flag.
[__CYGWIN__]: Remove special code that defines mbstate_t and WEOF
for Cygwin.
* libc/sys/linux/sys/_types.h (_mbstate_t): Remove protective flag.
* libc/include/sys/_types.h (_mbstate_t): Changed to use
unsigned char internally.
* libc/sys/linux/sys/_types.h: Ditto.
* libc/include/sys/reent.h
* libc/stdlib/mblen.c (mblen): Use function-specific state
value from default reentrancy structure.
* libc/stdlib/mblen_r.c (_mblen_r): If return code from
_mbtowc_r is less than 0, reset state __count value and
return -1.
* libc/stdlib/mbrlen.c (mbrlen): If the input state pointer
is NULL, use the function-specific pointer provided in the
default reentrancy structure.
* libc/stdlib/mbrtowc.c: Add reentrant form of function.
If input state pointer is NULL, use function-specific area
provided in reentrancy structure.
* libc/stdlib/mbsrtowcs.c: Ditto.
* libc/stdlib/wcrtomb.c: Ditto.
* libc/stdlib/wcsrtombs.c: Ditto.
* libc/stdlib/mbstowcs.c: Reformat.
* libc/stdlib/wcstombs.c: Ditto.
* libc/stdlib/mbstowcs_r.c (_mbstowcs_r): If an error occurs,
reset the state's __count value and return -1.
* libc/stdlib/mbtowc.c: Ditto.
* libc/stdlib/mbtowc_r.c (_mbtowc_r): Add restartable functionality.
If number of bytes is used up before completing a valid multibyte
character, return -2 and save the state.
* libc/stdlib/wctomb_r.c (_wctomb_r): Define __state as __count
and change some __count references to __state for clarity.
* libc/include/sys/config.h: Define accordingly __WCHAR_MAX__.
* libc/include/wchar.h: Define WCHAR_MIN as 0 and WCHAR_MAX as
__WCHAR_MAX__ or 0x7fffffffu.
* libc/string/wcscmp.c: Delete wrong and unnecessary type cast.
* libc/string/wcsncmp.c: Ditto.
Corinna Vinschen
Christopher Faylor
Nick Clifton
Jeff Johnston
Joern Rennecke
Richard Sandiford
Kazu Hirata
Joel Sherrill
Jim Wilson