This makes sure any system-defined limits are specified before the
defaults are checked. Without this, ARG_MAX and PATH_MAX end up
getting the default definitions from limits.h rather than the defines
from syslimits.h. This could potentially cause problems when
different files used different values for the same name.
Signed-off-by: Keith Packard <keithp@keithp.com>
Make sure device context is not copied to forked process.
It is a process-specific datastructure.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Try various Unicode characters which may be used as a replacement
character in case an invalid character has to be printed.
Current list is 0xfffd "REPLACEMENT CHARACTER", 0x25a1 "WHITE SQUARE",
and 0x2592 "MEDIUM SHADE" in that order.
Additionally workaround a problem with some fonts (namely DejaVu
Sans Mono) which are returned wit ha broken fontname with trailing
stray characters.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Improve strstr performance for the common case of short needles. For a single
character strchr is best, for 2-4 characters a small loop is fastest. For these
the speedup over the Two-Way algorithm is ~10 times on large strings.
Newlib builds, the new code passes GLIBC testsuite. OK for commit?
Issuing an ARM semi-hosting Seek command when just querying file
position with SEEK_CUR and offset zero is unnecessary, because unlike
the lseek() Unix system call the Seek command does not actually return
the file position. For that reason, syscalls.c for ARM keeps track of
file position in the 'poslog', so we can just return that.
Moreover, since the Seek command only accepts an absolute file position,
SEEK_CUR operations are implemented by adding the relative offset to the
position in the poslog. If the host implements non-binary files with
implicit carriage return characters but doesn't discount those implicit
CRs when implementing Seek (by just mapping straight to Windows file
operations), this actually ended up wrongly changing file position when
using SEEK_CUR with offset zero or functions like ftell() or fgetpos()
that are based on that.
Also, use off_t rather than int for the poslog.
So far we printed a half filled square (0x2592) if the input char is
invalid, but using REPLACEMENT CHARACTER (0xfffd) is apparently the way
to go.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 35998fc2fa fixed the buffer underun
in win32 path normalization, but introduced a new bug: A wrong
assumption led to the inability to backtrack the path outside of the
current working directory in case of relative paths.
This patch fixes this problem, together with a minor problem if the CWD
is on a network share: The result erroneously started with tripple
backslash if the src path starts with a single backslash.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Standard headers shouldn't use non-reserved identifiers as parameter
names in function declarations, because programs could in theory
define macros with such names before including a header.
This macro selects a compiler option that disables recognition of
common memset/memcpy patterns and converting those to direct
memset/memcpy calls.
Signed-off-by: Keith Packard <keithp@keithp.com>
Upon successful completion, times() shall return the elapsed real time,
in clock ticks, since an arbitrary point in the past (for example,
system start-up time).
Signed-off-by: Kito Cheng <kito.cheng@gmail.com>
Starting with Windows 10, LookupAccountSid/Name return valid
info for the login session with new SID_NAME_USE value
SidTypeLogonSession. To return the same info as on pre-Windows 10,
we have to handle this type.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
cygpsid::get_id neglects to set the type to 0 (ACL_UNDEFINED_TAG
in POSIX speak) if the SID can not be translated into a valid
uid or gid. This in turn leads to incorrect handling of uid/gid -1
entries.
Fix this by setting type to 0 if the id is unknown.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This patch follows glibc. Original commit message:
Author: Florian Weimer <fweimer@redhat.com>
Date: Thu, 14 Apr 2016 06:54:57 +0000
Remove union wait [BZ #19613]
The overloading approach in the W* macros was incompatible with
integer expressions of a type different from int. Applications
using union wait and these macros will have to migrate to the
POSIX-specified int status type.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
These types were introduced by FreeBSD commit:
"Make struct xinpcb and friends word-size independent.
Replace size_t members with ksize_t (uint64_t) and pointer members
(never used as pointers in userspace, but instead as unique
idenitifiers) with kvaddr_t (uint64_t). This makes the structs
identical between 32-bit and 64-bit ABIs.
On 64-bit bit systems, the ABI is maintained. On 32-bit systems,
this is an ABI breaking change. The ABI of most of these structs
was previously broken in r315662. This also imposes a small API
change on userspace consumers who must handle kernel pointers
becoming virtual addresses.
PR: 228301 (exp-run by antoine)
Reviewed by: jtl, kib, rwatson (various versions)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15386"
In RTEMS, there is no user/kernel space separation. So, use the types
size_t and uintptr_t.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
The __XSI_VISIBLE is not enabled by default in Newlib. This is an
incompatiblity between FreeBSD and glibc.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
with name SO_DOMAIN to get the domain of a socket.
This is helpful when testing and Solaris and Linux have the same
socket option using the same name.
Reviewed by: bcr@, rrs@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16791
queues per bucket.
There is a hashing algorithm which should distribute IPv6 reassembly
queues across the available buckets in a relatively even way. However,
if there is a flaw in the hashing algorithm which allows a large number
of IPv6 fragment reassembly queues to end up in a single bucket, a per-
bucket limit could help mitigate the performance impact of this flaw.
Implement such a limit, with a default of twice the maximum number of
reassembly queues divided by the number of buckets. Recalculate the
limit any time the maximum number of reassembly queues changes.
However, allow the user to override the value using a sysctl
(net.inet6.ip6.maxfragbucketsize).
Reviewed by: jhb
Security: FreeBSD-SA-18:10.ip
Security: CVE-2018-6923
The IPv4 fragment reassembly code supports a limit on the number of
fragments per packet. The default limit is currently 17 fragments.
Among other things, this limit serves to limit the number of fragments
the code must parse when trying to reassembly a packet.
Add a limit to the IPv6 reassembly code. By default, limit a packet
to 65 fragments (64 on the queue, plus one final fragment to complete
the packet). This allows an average fragment size of 1,008 bytes, which
should be sufficient to hold a fragment. (Recall that the IPv6 minimum
MTU is 1280 bytes. Therefore, this configuration allows a full-size
IPv6 packet to be fragmented on a link with the minimum MTU and still
carry approximately 272 bytes of headers before the fragmented portion
of the packet.)
Users can adjust this limit using the net.inet6.ip6.maxfragsperpacket
sysctl.
Reviewed by: jhb
Security: FreeBSD-SA-18:10.ip
Security: CVE-2018-6923
Rack includes the following features: - A different SACK processing
scheme (the old sack structures are not used). - RACK (Recent
acknowledgment) where counting dup-acks is no longer done instead time
is used to knwo when to retransmit. (see the I-D) - TLP (Tail Loss
Probe) where we will probe for tail-losses to attempt to try not to take
a retransmit time-out. (see the I-D) - Burst mitigation using TCPHTPS -
PRR (partial rate reduction) see the RFC.
Once built into your kernel, you can select this stack by either
socket option with the name of the stack is "rack" or by setting
the global sysctl so the default is rack.
Note that any connection that does not support SACK will be kicked
back to the "default" base FreeBSD stack (currently known as "default").
To build this into your kernel you will need to enable in your
kernel:
makeoptions WITH_EXTRA_TCP_STACKS=1
options TCPHPTS
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D15525
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures:
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations:
As DragonflyBSD, a load balance group is limited to 256 pcbs (256 programs or
threads sharing the same socket).
This is a substantially different contribution as compared to its original
incarnation at svn r332894 and reverted at svn r332967. Thanks to rwatson@
for the substantive feedback that is included in this commit.
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Obtained from: DragonflyBSD
Relnotes: Yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
Part 3 of many ...
The VPC framework relies heavily on cloning pseudo interfaces
(vmnics, vpc switch, vcpswitch port, hostif, vxlan if, etc).
This pulls in that piece. Some ancillary changes get pulled
in as a side effect.
Reviewed by: shurd@
Approved by: sbruno@
Sponsored by: Joyent, Inc.
Differential Revision: https://reviews.freebsd.org/D15347
This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
programs or threads to bind to the same port and incoming connections will be
load balanced using a hash function.
Most of the code was copied from a similar patch for DragonflyBSD.
However, in DragonflyBSD, load balancing is a global on/off setting and can not
be set per socket. This patch allows for simultaneous use of both the current
SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
Required changes to structures
Globally change so_options from 16 to 32 bit value to allow for more options.
Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
Limitations
As DragonflyBSD, a load balance group is limited to 256 pcbs
(256 programs or threads sharing the same socket).
Submitted by: Johannes Lundberg <johanlun0@gmail.com>
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11003
Use an accessor to access ifgr_group and ifgr_groups.
Use an macro CASE_IOC_IFGROUPREQ(cmd) in place of case statements such
as "case SIOCAIFGROUP:". This avoids poluting the switch statements
with large numbers of #ifdefs.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14960
This fixes 32-bit compat (no ioctl command defintions are required
as struct ifreq is the same size). This is believed to be sufficent to
fully support ifconfig on 32-bit systems.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14900
Add a new "interleave" allocation policy which stripes pages across
domains with a stride or width keeping contiguity within a multi-page
region.
Move the kernel to the dedicated numbered cpuset #2 making it possible
to assign kernel threads and memory policy separately from user. This
also eliminates the need for the complicated interrupt binding code.
Add a sysctl API for viewing and manipulating domainsets. Refactor some
of the cpuset_t manipulation code using the generic bitset type so that
it can be used for both. This probably belongs in a dedicated subr file.
Attempt to improve the include situation.
Reviewed by: kib
Discussed with: jhb (cpuset parts)
Tested by: pho (before review feedback)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14839
Make all kernel accesses to ifru_buffer go via access functions
which take the process ABI into account and use an appropriate union
to access members in the correct place in struct ifreq.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14846
According to 802.1Q-2014, VLAN tagged packets with VLAN id 0 should be
considered as untagged, and only PCP and DEI values from the VLAN tag
are meaningful. See for instance
https://www.cisco.com/c/en/us/td/docs/switches/connectedgrid/cg-switch-sw-master/software/configuration/guide/vlan0/b_vlan_0.html.
Make it possible to specify PCP value for outgoing packets on an
ethernet interface. When PCP is supplied, the tag is appended, VLAN
id set to 0, and PCP is filled by the supplied value. The code to do
VLAN tag encapsulation is refactored from the if_vlan.c and moved into
if_ethersubr.c.
Drivers might have issues with filtering VID 0 packets on
receive. This bug should be fixed for each driver.
Reviewed by: ae (previous version), hselasky, melifaro
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D14702
Keith Packard
Szabolcs Nagy
Jon Beniston
Corinna Vinschen
Wilco Dijkstra
Andy Koppe
Denis Ivanov
Sebastian Huber
tuexen
jtl
rrs
sbruno
mmacy
brooks
jeff
kib