VirtualQueryEx, called by fixup_mmaps_after_fork, requires
PROCESS_QUERY_INFORMATION permissions per MSDN. However, testing
shows that PROCESS_QUERY_LIMITED_INFORMATION is sufficient when
running the same code on Windows 8.1 or Windows 10. Fix the code
to give the forked child always PROCESS_QUERY_INFORMATION perms
on Windows Vista/7 and respective server releases.
Revert now unneeded patch to check_token_membership as well.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
POSIX requires that raise(3) is equivalent to
pthread_kill(pthread_self(), sig);
in multi-threaded applications. Our raise just called kill(sig).
Fix that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Keeping an inheritable handle open results in that handle being
spilled over into grandchild processes, which is not desired.
Duplicate original parent handle into a non-inheritable one with
minimal SYNCHRONIZE permissions and close the original handle.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Exec'ed/spawned processes don't need PROCESS_DUP_HANDLE. Remove that
permission from the parent handle.
- PROCESS_QUERY_LIMITED_INFORMATION doesn't work for Windows 7 if the
process is started as a service. Add PROCESS_QUERY_INFORMATION for
pre-Windows 8 in that case.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The version info only depends on the object files. This results
in the version info not being rebuild immediately if a source
file is changed. Rather, the version info is only rebuilt on the
next make run.
Fix that by making the version info build rule dependent on the
source files.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- This simple and official method replaces cyglsa and "create token"
methods. No network share access, same as before.
- lsaauth and create_token are disabled now. If problems crop up,
they can be easily reactivated. If no problems crop up, they
can be removed in a while, together with the lsaauth subdir.
- Bump Cygwin version to 3.0.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The previous patch failed with password-less auth because in
that case the return code from get_server_groups wasn't tested.
Fix that. Also make sure that get_server_groups does not
check if the account is disabled or locked out when just fetching
the group list for initgroups or getgrouplist.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far seteuid could change uid to any existing account, given
sufficient permissions of the caller. This is kind of bad since
it disallows admins to refuse login to disabled or locked out
accounts.
Add check for the account's UF_ACCOUNTDISABLE or UF_LOCKOUT flags
and don't let the user in, if one of the flags is set.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Use info from same source (GetNetworkParams).
Also move getdomainname near gethostname in source.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If gethostname() fails we call GetComputerNameEx with
ComputerNameDnsFullyQualified. This is wrong, gethostname should return
the hostname only, not the FQDN. Fix this by calling GetComputerNameEx
with ComputerNameDnsHostname.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When reusing a cygthread, the stub method fails to set the thread name
to the new name. The name is only set when actually creating the
thread. Fix that by moving the SetThreadName call right in front of the
thread function call.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Combine with a bit of cleanup:
- Drop overrun_event_running in favor of overrun_count being -1.
- Fix include guard in posix_timer.h.
- Drop ununsed function timespec_to_us.
- Don't use Interlocked functions without need.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Allocating on the cygheap would copy information of the tracker into
the child process. A forked child knows the timer id and could simply
still access the (free'd but still valid) timer_tracker on the heap,
which is dangerous and very certainly doesn't reflect POSIX semantics.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Rename files timer.* to posix_timer.*.
- Reimplement using an OS timer rather than a handcrafted wait loop.
- Use a Slim R/W Lock for synchronization.
- Drop timer chaining. It doesn't server a purpose since all timers
are local only.
- Rename ttstart to itimer_tracker to better reflect its purpose.
It's not the anchor for a timer chain anymore anyway.
- Drop fixup_timers_after_fork. Everything is process-local, nothing
gets inherited.
- Rename timer_tracker::disarm_event to disarm_overrun_event for
better readability.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- When correcting the next expiration timestamp, the number of
expirations gets computed correctly, just the expiration timestamp
itself is then only incremented by a single interval, rather than
the just computed expired intervals. Fix that.
- drop the local clock variable in timerfd_tracker::create. It doesn't
serve any purpose.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- split into to __try/__except blocks to make sure
leave_critical_section is always called when required.
- Actually fill time_spec in settime so it_interval is returned
correctly.
- Return all 0 if timer is disarmed.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The value returned by reading from a timerfd is not an overrun
count in the same sense as for posix timers, it's an expiry counter.
Reflect that in the name.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Drop erroneous initial computation of overrun count in settime
for absolute non-realtime clocks. It's repeated in thread_func
and thus counted twice.
- Fix overrun computation for timestamp offsets being a multiple of
the timer interval. The timestamp has to be corrected after the
first offset, otherwise the correction loop counts the intervals
again.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Non-CLOCK_REALTIME counters always use a relative DueTime in NtSetTimer.
However, relative DueTime has to be negative, but the code
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- On systems with inexact realtime clock, the current timestamp may
be fractionally smaller than the desired timestamp. This breaks the
computation for incrementing overrun_count so overrun_count may end
up as 0. Expiring the timer with an overrun_count of 0 is a no-go.
Make sure we always increment overrun_count by at least one after
timer expiry.
- Do not expire the timer when another process deletes its timer_tracker.
This, too, may result in a 0 overrun_count.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Using posix timers "timer_tracker" as base class for timerfd was flawed.
Posix timers are not inherited by child processes and don't survive
execve. The method used by posix timers didn't allow to share timers
between processes. The timers were still per-process timers and worked
entirely separate from each other. Reading from these timers via
different descriptors was only synchronized within the same process.
This does not reflect the timerfd semantics in Linux: The per-file
timers can be dup'ed and survive fork and execve. They are still just
descriptors pointing to the same timer object originally created by
timerfd_create. Synchronization is performed between all descriptor
instances of the same timer, system-wide.
Thus, reimplement timerfd using a timer instance in shared memory,
a kernel timer, and a handful of sync objects.
Every process maintains a per-process timerfd struct on the cygheap
maintaining a per-process thread. Every process sharing the same
timerfd will run this thread checking the state of the timer, similar
to the posix timer thread, just working on the shared objects and
synchronizing its job with each other thread.
Drop the timerfd implementation in the posix timer code and move the
public API to fhandler_timerfd.c. Keep the ttstart timer_tracker
anchor out of "NO_COPY" since the fixup_after_fork code should run to
avoid memory leakage.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Linux returns EINVAL, "fd is attached to an object which is unsuitable
for writing". If we don't handle write locally, write returns EBADF.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Puzzeling: Commit ec98d19a08
changed ttstart to NO_COPY but kept all the code to handle
fixup after fork. Revert to not-NO_COPY and make timerfd
fork work.
- On fixup_after_fork, keep timerfd timers and restart thread
if they were armed in the parent.
- Move timerfd timer_trackers to cygheap. Overload timer_tracker
new and delete methods to handle timers accordingly. This is not
exactly required for fork, but exec will be grateful.
- Give up on TFD_TIMER_CANCEL_ON_SET for now. There's no easy way
to recognize a discontinuous change in a clock.
- Be paranoid when cleaning out ttstart.
- Fix some minor issues.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Drop initial overrun computation from timer_tracker::settimer.
It's performed in timer_tracker::thread_func anyway.
- Fix regression in returning correct overrun count narrowed down to
int from timer_getoverrun. This has been introduced by changing
overrun_count_curr to LONG64.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
First cut of a timerfd implementation.
Still TODO:
- fork/exec semantics
- timerfd_settime TFD_TIMER_CANCEL_ON_SET flag
- ioctl(TFD_IOC_SET_TICKS)
- bug fixes
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In case sigwait_common returns EINTR, read wrongly ignores it,
so read can't be interrupt by a signal. Fix that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
While FileRenameInformationEx is defined starting with Windows
10 1709 per MSDN, it only starts working in W10 1809, apparently.
Users of 1803 report "Function not implemented".
Introduce wincap_10_1809 and change the version check in
wincapc::init accordingly. Split has_posix_file_info into
has_posix_unlink_semantics and has_posix_rename_semantics.
Enable the latter only starting with W10 1809.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Allow the signal thread to recognize we're called in consequence of
select on a signalfd. If the signal is part of the wait mask, don't
call any signal handler and don't remove the signal from the queue,
so a subsequent read (or sigwaitinfo/sigtimedwait) still gets the
signal. Instead, just signal the event object at
_cygtls::signalfd_select_wait for the thread running select.
The addition of signalfd_select_wait to _cygtls unearthed the alignment
problem of the context member again. To make sure this doesn't get lost,
improve the related comment in the header file so that this (hopefully)
doesn't get lost (again).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
First cut of a signalfd implementation.
Still TODO: Non-polling select.
This should mostly work as on Linux except for missing support
for some members of struct signalfd_siginfo, namely ssi_fd,
ssi_band (both SIGIO/SIGPOLL, not fully implemented) and ssi_trapno
(HW exception, required HW support).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
There's a long-standing bug in select. If we have poll-only
descriptors in the fd set, select overwrites the incoming
fd sets with the polling result. If none of the fds is ready,
select has to loop again. But now the fd sets are set to all
zero and select hangs.
Fix this by utilizing the local fd sets r, w, e as storage for
the incoming fd sets and use them to initialize select_stuff.
If we have to loop, overwritung the incoming fd sets doesn't matter.
While at it, rename r, w, e to readfds_in, writefds_in, exceptfds_in.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- use int64_t instead of long long
- make is_timer_tracker const
- improve copyright header comment
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far we check the recycler name all the time, and the last interation
also only managed to handle two ways to write the recycler. However,
an adventurous user might change the case of the recycler arbitrarily.
Fix this problem by keeping track of the name in a somewhat relaxed
fashion. Use camel back on drive C by default, all upper case elsewhere.
Only if the rename op fails do we fix the recycler name on the fly
when trying to create it, and it turns out it already existed.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If the first rename fails, we reopen the rootdir for creating a subdir.
The rootdir handle can change its value at this point, but the code
doesn't take this into account. The subsequent rename then fails with
STATUS_INVALID_HANDLE. Fix this by copying the new rootdir value to
pfri->RootDirectory.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far we reopened the file if it was opened case sensitive to
workaround the problem that the recycler could be named in
camel back or all upper case, depending on who created it.
That's a problem for O_TMPFILE on pre-W10. As soon as the
original HANDLE gets closed, delete-on-close is converted to full
delete disposition and all useful operations on the file cease to
work (STATUS_ACCESS_DENIED or STATUS_FILE_DELETED).
To avoid that problem drop the reopen code and check for the exact
recycler filename, either $Recycle.Bin or $RECYCLE.BIN, if the file
has been opened case sensitive.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
On pre-W10 systems there's no way to reopen a file by handle if
the delete disposition is set. We try to get around with
duplicating the handle.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The new proc fd code accidentally allowed to linkat an O_TMPFILE
even if the file has been opened with O_EXCL. This patch fixes it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
move special fd symlink code into own fhandler_process_fd class
to simplify further additions to /proc/PID/fd/DESCRIPTOR symlink
handling.
Add a method to handle stat(2) on such a proc fd symlink by handle.
This allows correct reply from stat(2) if the target file has been
deleted. This eventually fixes `awk -f /dev/fd/3 3<<eof'.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
path_conv now sets the PATH_RESOLVE_PROCFD flag in path_flags if
the PC_SYM_NOFOLLOW_PROCFD pathconv_arg flag has been set on input
*and* the file is actually a proc fd symlink.
Add matching path_conv::follow_fd_symlink method for checking and
use it in open(2).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Remove another unfortunate amalgamation: Mount flags (MOUNT_xxx)
are converted to path_types (PATH_xxx) and mixed with non-mount
path_types flags in the same storage, leading to a tangled,
pell-mell usage of mount flags and path flags in path_conv and
symlink_info.
- There's also the case of PC_NONULLEMPTY. It's used in exactly
one place with a path_conv constructor only used in this single
place, just to override the automatic PC_NULLEMPTY addition
when calling the other path_conv constructors. Crazily,
PC_NONULLEMPTY is a define, no path_types flag, despite its
name.
- It doesn't help that the binary flag exists as mount and path
flag, while the text flag only exists as path flag. This leads
to mount code using path flags to set text/binary. Very confusing
is the fact that a text mount/path flag is not actually required;
the mount code sets the text flag on non binary mounts anyway, so
there are only two states. However, to puzzle people a bit more,
path_conv::binary wrongly implies there's a third, non-binary/non-text
state.
Clean up this mess:
- Store path flags separately from mount flags in path_conv and
symlink_info classes and change all checks and testing inline
methods accordingly.
- Make PC_NONULLEMPTY a simple path_types flag and drop the
redundant path_check constructor.
- Clean up the definition of pathconv_arg, path_types, and mount flags.
Use _BIT expression, newly define in cygwin/bits.h.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
There's an unfortunate amalgamation of caller-provided pathconv_arg
flags with path_types flags which in turn are mostly mount flags.
This leads to a confusion of flag values in sylink_info::pflags and,
in turn, in path_conv::path_flags.
This patch decouples pathconv_flags from the other flags by making
sure that a pathconv_flag is never copied into a variable used for
path_types flags. Also, remove PATH_NO_ACCESS_CHECK since it's
not necessary.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Along the same lines as the previous patch: By reopening an
O_TMPFILE by handle, we can now move the file to the bin at
open time and thus free'ing up the parent dir and *still*
open the file as /proc/PID/fd/DESCRIPTOR by linkat(2).
Allows expressions along the lines of `cat /proc/self/fd/0 <<EOF'.
The problem here is that the temporary file used for the here script
has already been deleted by the shell. Opening by filename, as
implemented so far, doesn't work because the file has been moved
to the bin.
Allow reopening files by handle the same way from another process
as long as we have sufficient permissions on the foreign process.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
To allow reopening a file open in another process by HANDLE, introduce
a matching file_pathconv method, taking a file descriptor as parameter.
The result is a serialized path_conv and a HANDLE value. The HANDLE is
valid in the foreign process and MUST be duplicated into the target
process before usage.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far io_handle is NULL when calling fhandler_base::open to
open or create a file. Add a check for io_handle to allow
priming the fhandler with a HANDLE value so we can reopen a
file from a HANDLE on file systems supporting it. This allows
to open already deleted files for further action. This will
be used by open("/proc/PID/fd/DESCRIPTOR") scenarios.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The commit message of commit 07e0a9584f
and the expectation set therein, are wrong.
There's no POSIX semantics allowing to link a file with a link
count of 0 and making it available in the file system again.
In fact, the Linux linkat extension AT_EMPTY_PATH explicitely
disallows to link a file descriptor to a file with a link count
of 0, except for O_TMPFILE without O_EXCL.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Turns out, the definition of POSIX unlink semantics is half-hearted
so far: It's not possible to link an open file HANDLE if it has
been deleted with POSIX semantics, nor is it possible to remove
the delete disposition. This breaks linkat on an O_TMPFILE.
Tested with W10 1809.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
On Windows 10 1803 and later, create dirs under the Cygwin
installation dir as case sensitive, if WSL is installed.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- short-circuit most code in unlink_nt since it's not necessary
anymore if FILE_DISPOSITION_POSIX_SEMANTICS is supported.
- Immediately remove O_TMPFILE from filesystem after creation.
Disable code for now because we have to implement /proc/self/fd
opening by handle first, lest linkat fails.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Newer FAT32 and exFAT add FILE_SUPPORTS_ENCRYPTION to their
flags which wasn't handled by Cygwin yet.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Various new file info class members adding important POSIX semantics
have been added with W10 1709. We may want to utilize them, so add
a matching wincaps.
Rearrange checking the W10 build number to prefer the latest builds
over the older builds. Rename wincap_10 to wincap_10_1507 for
enhanced clarity.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Add missing members added in later OS versions
- Rearrange accompanying FILE_foo_INFORMATION structs
ordered by info class
- Add promising FILE_foo_INFORMATION structs of later
Windows 10 releases plus accompanying enums
- Drop "Checked on 64 bit" comments since that's self-evident
these days
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The check for the TEB being allocated beyond the first 2GB area is not
valid anymore. At least on W10 WOW64, the TEB is allocated in the
lower 2GB even in large-address aware executables. Use VirtualQuery
instead. It fails for invalid addresses so that's a simple enough test.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
While reformatting the script, backticks `` were replaced with
brackets $(). This in turn invalidated the \\( ... \\) expressions in the
sed script because backslash resolution in $() works differently from
backslash resolution in ``. Only a single backslash is valid now.
While at it, fix up the uname(2) date representation when building a
snapshot.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
when calling clocks too early in DLL init, the vtables are not correctly
set up for some reason. Calls to init() from now() fail because the init
pointer in the vtable is NULL.
Real life example is mintty which runs into a minor problem at startup,
triggering a system_printf call. Strace is another problem, it's called
the first time prior to any class initialization.
Workaround is to make sure that no virtual methods are called in an
early stage. Make init() non-virtual and convert resolution() to a
virtual method instead. Add a special non-virtual
clk_monotonic_t::strace_usecs.
While at it:
- Inline internal-only methods.
- Drop the `inited' member. Convert period/ticks_per_sec toa union.
Initialize period/ticks_per_sec via InterlockeExchange64.
- Fix GetTickCount64 usage. No, it's not returning ticks but
milliseconds since boot (unbiased).
- Fix comment indentation.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Use whatever native unit the system provides for the resolution of
a timer to avoid rounding problems
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Drop hires_[nm]s clocks, rename hires.h to clock.h.
- Implement clk_t class as an extensible clock class in new file clock.cc.
- Introduce get_clock(clock_id) returning a pointer to the clk_t instance
for clock_id. Provide the following methods along the lines of the former
hires classes:
void clk_t::nsecs (struct timespec *);
ULONGLONG clk_t::nsecs ();
LONGLONG clk_t::usecs ();
LONGLONG clk_t::msecs ();
void clk_t::resolution (struct timespec *);
- Add CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_RAW, CLOCK_MONOTONIC_COARSE
and CLOCK_BOOTTIME clocks.
- Allow clock_nanosleep, pthread_condattr_setclock and timer_create to use
all new clocks (both clocks should be usable with a small tweak, though).
- Bump DLL major version to 2.12.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
clock_setres is a questionable function only existing on QNX.
Disable the function, just return success for CLOCK_REALTIME
to maintain backward compatibility.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The current method to make hires_ns priming thread-safe isn't
thread-safe. Rather than hoping that running the thread in
TIME_CRITICAL priority is doing the right thing, use a spinlock.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
LARGE_INTEGER has QuadPart anyway, no reason to compute the
64 bit value from HighPart and LowPart.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
fhandler_socket_wsock::set_socket_handle calls set_flags after
setting the O_NONBLOCK/O_CLOEXEC flags, thus overwriting them.
It also turns out that fhandler_socket_wsock::init_events is called
too late. The inheritence flags are changed before creating the
socket event handling objects. Thus, inheritence flags for
those objects are wrong with SOCK_CLOEXEC.
Fix this by reordering the calls and setting the file flags through
fhandler_base::set_flags.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Regression introduced with 2.11.0:
The failure paths in socket, socketpair and accept4 functions and
methods accidentally release *unused* cygheap_fdmanip objects. The
subsequently called dtable::release method was designed to be called for
*used* cygheap_fdmanip objects only. Using them on unused objects leads
to NULL pointer member dereferencing.
Worse, the inet/local accept4 methods only release the cygheap_fdmanip
object but neglect to delete the just created fhandler_socket_* object.
Fix this by removing the erroneous release calls in the aforementioned
failure paths and delete the fhandler_socket_* object in accept4 instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The fhandler_base_overlapped::copyto clears atomic_write_buf on the
clone, but none of the derived classes were doing this. This allowed
the destructor to double-free the buffer and corrupt cygheap.
Clear atomic_write_buf in copyto of all derived classes.
Move common content of the various <sys/dirent.h> and the latest FreeBSD
<dirent.h> to <dirent.h>.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Drop Cygwin-specific nanl in favor of a generic implementation
in newlib. Requires GCC 3.3 or later.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The current loop condition is borderline. Make sure it ends and
choose a replacement char in the unlikely case the current console
font isn't recognized at all.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Rather than relying on an index variable, store the current
replacement char and use that directly in WriteConsoleW.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
EnumFontFamiliesExW fails if the font is "Terminal" (aka "Raster Fonts")
and lfCharSet requests ANSI_CHARSET. Using DEFAULT_CHARSET fixes this.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Make sure device context is not copied to forked process.
It is a process-specific datastructure.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Try various Unicode characters which may be used as a replacement
character in case an invalid character has to be printed.
Current list is 0xfffd "REPLACEMENT CHARACTER", 0x25a1 "WHITE SQUARE",
and 0x2592 "MEDIUM SHADE" in that order.
Additionally workaround a problem with some fonts (namely DejaVu
Sans Mono) which are returned wit ha broken fontname with trailing
stray characters.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far we printed a half filled square (0x2592) if the input char is
invalid, but using REPLACEMENT CHARACTER (0xfffd) is apparently the way
to go.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 35998fc2fa fixed the buffer underun
in win32 path normalization, but introduced a new bug: A wrong
assumption led to the inability to backtrack the path outside of the
current working directory in case of relative paths.
This patch fixes this problem, together with a minor problem if the CWD
is on a network share: The result erroneously started with tripple
backslash if the src path starts with a single backslash.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Starting with Windows 10, LookupAccountSid/Name return valid
info for the login session with new SID_NAME_USE value
SidTypeLogonSession. To return the same info as on pre-Windows 10,
we have to handle this type.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
cygpsid::get_id neglects to set the type to 0 (ACL_UNDEFINED_TAG
in POSIX speak) if the SID can not be translated into a valid
uid or gid. This in turn leads to incorrect handling of uid/gid -1
entries.
Fix this by setting type to 0 if the id is unknown.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This patch follows glibc. Original commit message:
Author: Florian Weimer <fweimer@redhat.com>
Date: Thu, 14 Apr 2016 06:54:57 +0000
Remove union wait [BZ #19613]
The overloading approach in the W* macros was incompatible with
integer expressions of a type different from int. Applications
using union wait and these macros will have to migrate to the
POSIX-specified int status type.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Add __nl_item to <sys/_types.h> for FreeBSD compatibility. Use it in
<langinfo.h> and the Cygwin <nl_types.h>. Make the enum __nl_item in
<langinfo.h> anonymous.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
This reverts commit 8a32c24a7b.
Replacing page_size() with allocation_granularity() was incorrect.
The values returned by get_mem_values() are # of pages of size
page_size(). Multiplying with allocation_granularity() here
results in values 16 times too big.
By excluding the denormal-operand exception from FE_ALL_EXCEPT, it will not
be possible anymore to UNmask this exception by means of the API defined by
/usr/include/fenv.h
Note: terminology has changed since IEEE Std 854-1987; denormalized numbers
are called subnormal numbers nowadays.
This modification has basically been motivated by the fact that it is also
not possible on Linux to manipulate the denormal-operand exception by means
of the interface as defined by /usr/include/fenv.h. This has been the state
of affairs on Linux since 2001 (Andreas Jaeger).
The exceptions required by the standard (IEEE Std 754), in case they can be
supported by the implementation, are:
FE_INEXACT, FE_UNDERFLOW, FE_OVERFLOW, FE_DIVBYZERO and FE_INVALID.
Although it is allowed to define additional exceptions, there is no reason
to support the "denormal-operand exception" in this case (fenv.h), because
the subnormal numbers can be handled almost as fast the normalized numbers
by the hardware of the x86/x86_64 architecture. Said differently, a reason
to trap on the input of subnormal numbers does not exist. At least that is
what William Kahan and others at Intel asserted around 2000.
(that is William Kahan of the K-C-S draft, the precursor to the standard)
This commit modifies winsup/cygwin/include/fenv.h as follows:
- redefines FE_ALL_EXCEPT from 0x3f to 0x3d
- removes the definition for FE_DENORMAL
- introduces __FE_DENORM (0x2) (enum in Linux also uses __FE_DENORM)
- introduces FE_ALL_EXCEPT_X86 (0x3f), i.e. ALL x86/x86_64 FP exceptions
* create new function __get_cpus_per_group to evaluate # of CPU groups
* Call from format_proc_cpuinfo and sched_getcpu
* Bump API minor version
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
fnstenv MUST be followed by fldenv in fegetenv(), as the former disables all
exceptions in the x87 FPU, which is not appropriate here (fegetenv() ).
fldenv after fnstenv should reload the x87 FPU w/ the configuration that was
saved by fnstenv, i.e. a configuration that might have exceptions enabled.
Note: x86_64 uses SSE for floating-point, not the x87 FPU. However, because
feraiseexcept() attempts to provoke an exception using the x87 FPU, the bug
in fegetenv() will make this attempt futile here (x86_64).
Note: WoW uses the x87 FPU for floating-point, not SSE. Here anything that
would normally result in triggering an exception, not only feraiseexcept(),
will not be able to, as result of the bug in fegetenv().
Updates to misc files to integrate AIO into the Cygwin source tree.
Much of it has to be done when adding any new syscalls. There are
some updates to limits.h for AIO-specific limits. And some doc mods.
This code is where the AIO implementation is wired into existing Cygwin
mechanisms for file and device I/O: the fhandler* functions. It makes
use of an existing internal routine prw_open to supply a "shadow fd"
that permits asynchronous operations on a file the user app accesses
via its own fd. This allows AIO to read or write at arbitrary locations
within a file without disturbing the app's file pointer. (This was
already the case with normal pread|pwrite; we're just adding "async"
to the mix.)
This is the core of the AIO implementation: aio.cc and aio.h. The
latter is used within the Cygwin DLL by aio.cc and the fhandler* modules,
as well as by user programs wanting the AIO functionality.
Make getfacl print two colons instead of one after "other" and "mask".
Change the help text for setfacl to indicate that there can be either
one colon or two.
Bug in current ARM64 WOW64: GetNativeSystemInfo returns
PROCESSOR_ARCHITECTURE_INTEL rather than PROCESSOR_ARCHITECTURE_ARM64.
Provide for this.
Make code better readable.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Guard the entire operation with the FastPebLock critical section
used by RtlSetCurrentDirectory_U as well, thus eliminating the
race between concurrent chdir/fchdir/SetCurrentDirectory calls.
Streamline comment explaining the fallback method.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler_socket_local.cc (get_inet_addr_local): Change type from
'static int' to 'int' to be callable from syslog.cc.
* syslog.cc (connect_syslogd): Use get_inet_addr_local() instead of
getsockname() to retrieve name information of the syslogd socket.
Our local ntsecapi.h wrapper corrects a bug in the definition of
SystemFunction036 which otherwise leads to crashes on 32 bit when
using RtlGenRandom. The fhandler_socket_local.cc file accidentally
included the incorrect w32api version of that file, rather than the
local wrapper. Fix it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Certain tape drives (known example: QUANTUM_ULTRIUM-HH6) return
the non-standard ERROR_NOT_READY rather than ERROR_NO_MEDIA_IN_DRIVE
if no media is present. ERROR_NOT_READY is not documented as valid
return code from GetTapeStatus. Without handling this error code
Cygwin's tape code can't report an offline state to user space.
Fix this by converting ERROR_NOT_READY to ERROR_NO_MEDIA_IN_DRIVE
where appropriate.
Add a debug_printf to mtinfo_drive::get_status to allow requesting
user info without having to rebuild the DLL.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
pthread_timedjoin_np returns ETIMEDOUT if a thread is still running,
not EBUSY as pthread_tryjoin_np.
Also, clean up initializing timeout in pthread_tryjoin_np.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Move pthread_join to thread.cc to have all `join' calls in
the same file (pthread_timedjoin_np needs pthread_convert_abstime
which is static inline in thread.cc)
- Bump API version
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler.h (class fhandler_socket_inet): Add variable bool oobinline.
* fhandler_socket_inet.cc (fhandler_socket_inet::fhandler_socket_inet):
Initialize variable oobinline.
(fhandler_socket_inet::recv_internal): Make the handling of OOB data
as consistent with POSIX as possible. Add simulation of inline mode
for OOB data as a workaround for broken winsock behavior.
(fhandler_socket_inet::setsockopt): Ditto.
(fhandler_socket_inet::getsockopt): Ditto.
(fhandler_socket_wsock::ioctl): Fix return value of SIOCATMARK command.
The return value of SIOCATMARK of winsock is almost opposite to
expectation.
* fhandler_socket_local.cc (fhandler_socket_local::recv_internal):
Remove the handling of OOB data from AF_LOCAL domain socket. Operation
related to OOB data will result in an error like Linux does.
(fhandler_socket_local::sendto): Ditto.
(fhandler_socket_local::sendmsg): Ditto.
This fixes the issue reported in following post.
https://cygwin.com/ml/cygwin/2018-06/msg00143.html
Commit ebd645e on 2001-10-03 made environ.cc:_addenv() add unneeded
space at the end of the environment block to "work around problems
with some buggy applications." This clutters the code and is
presumably no longer needed.
Thanks to Ken Harris <Ken.Harris@mathworks.com> for the diagnosis.
When backing up tail to handle a "..", the code only checked that
it didn't underrun the destination buffer while removing path
components. It did *not* take into account that the first backslash
in the path had to be kept intact. Example path to trigger the
problem: "C:\A..\..\..\B'
Fix this by moving the dst pointer to the first backslash so subsequent
tests cannot underrun this position. Also make sure that we always
*have* a backslash.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Thanks to Ken Harris <Ken.Harris@mathworks.com> for the diagnosis
which led to a buffer underrun in this loop.
Revert before release.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
GCC 7 is able to see straight through this trick, so use a more formal
method to avoid the warning.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
There are systems with a MaximumProcessorCount not
reflecting the actually available CPUs. The ActiveProcessorCount
is correct though. So we use ActiveProcessorCount rather than
MaximumProcessorCount per group to set group affinity correctly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Change set_socket_type/get_socket_type to virtual methods
* Move various variables into af_unix_shmem_t
* Change sun_name_t to match new usage pattern
* Move shut_state definition and add a name for the 0 value
* Allow marking packet as administrative packet. This allows
filtering out info packets exchange between peers and tweak
data accordingly.
* Rename send_my_name to send_sock_info and send credentials
if not called from bind (so the socket was already connected)
* Handle SO_PASSCRED in setsockopt/getsockopt
* Add input size checking to setsockopt/getsockopt
* Use NT functions where appropriate
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
We need to share socket info between threads *and* processes.
SRWLOCKs are single-process only, unfortunately. Provide a
sharable low-profile spinlock instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
E.g. arm ABI requires -fshort-enums for bare-metal toolchains.
Given there are only 29 category enums, the compiler chooses an
8 bit enum type, so a size of 11 bits for the bitfield leads to
a compile time error:
error: width of 'cat' exceeds its type
enum category cat: 11;
^~~
Fix this by aligning the size of the category members to byte
borders.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Per-socket info in fhandler isn't correctly shared between multiple
instances of th same descriptor. Implement a basic shared info which
is shared between all instances of a socket.
This also requires to move the fhandler_socket status bits into
fhandler_socket_wsock since the data is moved to the shared region
for AF_UNIX sockets.
Also, drop backing file requirement for socketpair server socket.
This will be handled differently in recvmsg/sendmsg.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* don't abort on failing allocation, just return with error
* make sure the allocation is restricted to a single process
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Bad idea. A file hidden from directory listings is not seen by
rm either, so it never calls unlink for the file and a recursive
removal of the parent directory fails with "directory not empty".
Fix comments accordingly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Use correct cygwait/WFSO invocation to not die on cancel and signals
uncontrolled.
* Manage io handles under io_lock.
* Copy peer address to user space under SEH to avoid a resource leak.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Using TerminateThread potentially leaks resources. In our case,
the connect wait thread may be forcefully terminated after
having successfully opened a client side pipe handle. If this
occurs, we have a stale pipe server instance, so the pipe will
never be closed as long as the process lives.
Avoid this by changing the npfs handle to non-blocking, so we can
wait on a termination event object from inside the thread itself
and cleanly exit from the thread instead of terminating.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Depending on the exact circumstances, some erros are indicated
by different status codes. Add helper macros to handle them
together.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The handle to the device is never needed. As the name impies,
FSCTL_PIPE_WAIT works on the file system, not on the device level.
Drop opening the device and make sure to open only one handle to NPFS.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
They are only used there anyway and it allows to use the AF_UNIX
macro without tweaking header files. While at it, improve
both constructors. The default constructor now creates the name
of an unnamed socket, the constructor taking parameters carefully
checks its input.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
...plus lots of helper functions. Add comment to explain how everything
works. This comment will be improved while implementing the yet missing
parts.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This function is going to be used for transposing sun_path of
abstract sockets. This also adds a transposition of the NUL
character to tfx_chars since NUL-bytes in abstract socket names
are perfectly valid.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Add constructors and new/delete operators to make sure sun_name_t
objects are allocated on the cygheap.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* check_reparse_point_target returns a path flag mask, rather than
just 1. Return PATH_SYMLINK | PATH_REP for symlinks and directory
mount points, PATH_SOCKET | PATH_REP for AF_UNIX sockets.
* Define Cygwin AF_UNIX socket reparse tag and GUID in ntdll.h.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Rearrange includes and drop unneccessary ones.
* Don't pull in cygwin/socket.h into sys/un.h just to get
sa_family_t. Include sys/types.h and use __sa_family_t instead.
* start including Windows headers using the w32api/ path prefix
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
fhandler_cygdrive has a size of 696 bytes on x86_64, while the next
biggest fhandler type, fhandler_pty_master, is 584 bytes. The members
responsible for the size are private to opendir/readdir/closedir usage.
fhandler_disk_file stores private readdir data in DIR->__d_internal
instead. Use equivalent method with fhandler_cygdrive. This drops
the size to 464 bytes.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Make distinct from AF_LOCAL for testing purposes. This will have
to be reverted as soon as fhandler_socket_unix goes life.
* Move saw_reuseaddr flag back to fhandler_socket status
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Insert another class fhandler_socket_wsock between fhandler_socket
and fhandler_socket_inet/fhandler_socket_local.
Also, add a new method fhandler::is_wsock_socket to allow asking
for sockets in general (is_socket) vs. Winsock-based sockets
(is_wsock_socket).
This allows to develop a new handler_socket_unix class as derived
class from fhandler_socket without any trace of wsock code left
in fhandler_socket.
While this is basically a temporary measure at this time, it may
prove useful for later interoperability with the upcoming Windows 10
AF_UNIX implementation at one point.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Rename DEV_TCP_MAJOR to DEV_SOCK_MAJOR
* Drop FH_TCP, FH_UDP, FH_ICMP in favor of single FH_INET
* Drop FH_UNIX, FH_STREAM, FH_DGRAM in favor of single FH_LOCAL
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
First cut, still incomplete
* fhandler_socket is now base class for other socket classes
* fhandler_socket_inet handles AF_INET and AF_INET6 sockets
* fhandler_socket_local handles AF_LOCAL/AF_UNIX sockets
* finally get rid of fdsock by using set_socket_handle in accept4
* align file-related calls (fstat, fstatvfs, fchown, fchmod, facl)
to Linux.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Move definition of windows to POSIX error mapping struct into
cygerrno.h
- Move declaration of winsock errno functions to cygerrno.h
- Input to error mapping functions is DWORD
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Dropping the 'LL' specifier leads to 32 bit truncation during timestamp
computation. Revert it. Exempt MSPERSEC which is used for 32 bit values.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Add fhandler_socket::socket method
Add fhandler_socket::set_socket_handle method, basically duplicating
what fdsock is doing. This is the first step in getting rid of fdsock.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Windows does not remove FILE_ATTRIBUTE_TEMPORARY by itself after a
file has been closed. It's just some attribute which can be set or
removed at will, despite its purpose.
Apparently there are tools out there which use FILE_ATTRIBUTE_TEMPORARY
accidentally or wrongly, even Microsoft's own tools are affected. In
the end, the filesystem is potentially full of files with this attribute
set.
Implement O_TMPFILE files with FILE_ATTRIBUTE_TEMPORARY and
FILE_ATTRIBUTE_HIDDEN set. This combination is pretty unlikely.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Fix an incorrect condition to recognize AF_LOCAL sockets in
file-related functions (fchmod, fchown, fstat, fsttavfs, facl, link).
* Return successfully when called on unnamed or abstract AF_LOCAL sockets,
except link, just as on Linux.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Use 64 bit timestamps
* Use System boot and process start time to compute starttime value per
Linux proc.5 description.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The previous patch introduced a compiler warning on x86.
Given time_t is only 4 bytes on x86 we get a long vs. unsigned long
comparison in timeval_to_ms. Fix it by careful casting.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Redefine NSPERSEC to NS100PERSEC
* Define NSPERSEC as nanosecs per second
* Define USPERSEC as microsecs per second
* Use above constants throughout where appropriate
* Rename to_us to timespec_to_us and inline
* Rename it_bad to timespec_bad and inline
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Rearrange setsockopt/getsockopt into per level/per optname
preprocessing switch, actual call, per level/per optname
postprocessing switch for better readability as well as
extensibility.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Workaround the problem that bind doesn't fail with EADDRINUSE
if a socket with the same local address is still in TIME_WAIT.
Use IP Helper functions to check if such a socket exist and don't
even try this port, if so.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Assuming the address parameter is non-NULL, the test in
cygwin_bindresvport_sa only tests if the address family is
supported at all, which is insufficient.
Check if the incoming address family matches the socket
address family and for being AF_INET in cygwin_bindresvport
since the latter doesn't support any other family.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
We're still using ~SO_REUSEADDR because SO_EXCLUSIVEADDRUSE wasn't
defined in Mingw. But it is in Mingw-w64, so fix it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This new function returns the name of the calling thread; works for both
cygthreads and pthreads. All calls to cygthread::name(/*void*/) replaced
by calls to mythreadname(/*void*/).
While POSIX mandates that certain socket types shall be defined by the
inclusing of <netinet/in.h>, it also says that this header may also make
visible all <sys/socket.h> symbols. Glibc does this, and without out it,
some packages end up requiring an additional #include <sys/socket.h>.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
POSIX does not mention the inclusion of <sys/time.h> in <sys/socket.h>
or <netinet/in.h>, nor is there anything in the latter two that would
require the former.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
When reading/writing block devices, Cygwin emulates Linux, providing
a byte-exact file position, albeit the underlying device drivers don't.
Unfortunately this only worked correctly for reading. The raw_write
method failed to revalidate the buffer after the read-modify-write
cycle in case len is not a multiple of the sector length. This in
turn resulted in lseek reporting a wrong file pointer.
Also, fix a condition for invalidating the buffer after writing from
a remaining read buffer.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Rounddown incoming addr on a page boundary. Without this, we may end
up with a fork error for private, anonymous maps. The reason is, we
use VirtualAlloc in this case which will potentially overcommit if
addr is not on a page boundary. This isn't taken into account in
bookkeeping, but fixup_mmaps_after_fork will eventually stumble over
this when trying to reproduce the copy-on-write pages: VirtualQuery
returns a region reaching beyond the supposedly allocated address
range and from there it goes downhill.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* change memcpy to internal _memcpy not setting the return value in %rax
* implement all memcpy-like functions as caller to _memcpy, setting %rax
to correct return value beforehand. This is possible because _memcpy
does not use %rax at all
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Since commit 8128f5482f, we have all the
non-tracing functions listed in posixoptions(7). The tracing functions
are gated by their own option, and are obsolecent anyway.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
* Don't use a bool var to store three states (-1, 0, 1).
* Correctly check for NT_SUCCESS of a function returning NTSTATUS.
* Straighten out code for better readability.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 603ef545bd broke this snippet and
commit 5b312b4747 didn't help at all since
FILE_CREATE is exactly *not* the situation the test was originally
supposed to handle.
In fact, none of the open flags used by fhandler_base::open actually
hits this problem anymore, so just drop the code.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Difference to Linux: We can't create files which don't show up
in the filesystem due to OS restrictions. As a kludge, make a
(half-hearted) attempt to hide the file in the filesystem.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Fix the maximum number of sockets allowed in the session to 2048,
instead of making it relative to sizeof(wsa_event).
The original choice of 2048 was in order to fit the wsa_events array
in the .cygwin_dll_common shared section, but there is still enough
room to grow there to have 2048 sockets on 64-bit as well.
* Return an error and set errno=ENOBUF if a socket can't be created
due to this limit being reached.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Also updates the fhandler_*::ftruncate implementations to adhere to the same
semantics. The error handling semantics of those syscalls that use
fhandler_*::ftruncate are moved to the implementations of those syscalls (
in particular ftruncate() and friends still set errno and return -1 on error
but that logic is handled in the syscall implementation).
This was called only on filenames in /etc/setup/installed.db, which
are all basenames anyway. Moreover, base wasn't correctly handling
filenames containing colons.
Under some not quite clear conditions, NFS fails to use its
unlink workaround to rename a file to ".nfsXYZ". The problem has been
reproduced with the GAWK testext.awk testcase. To workaround this in
Cygwin, we now call try_to_bin on NFS, too. For some reason NFS doesn't
fail to rename the .cygXYZ file to .nfsXYZ after this Cygwin rename.
Fix comment in unlink_nt accordingly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The "final trick" code in try_to_bin accidentally never worked on
remote drives because it relies on rootdir. Which isn't set for
remote unlinks. The code now creates a full path for remote files.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The try_to_bin function isn't called for netapp FSes anyway, so testing
for this FS type in the function is moot.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The first argument of gethostbyaddr needs to accept a generic pointer
to be compatible with e.g. struct in_addr *. This caused an issue
compiling krb5-1.15.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
herror etc. are MISC, rcmd etc. are BSD, addrinfo functions are
POSIX.1-2001, except for IDN functionality which is GNU.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
When fork fails, we can use "%s" now with system_sprintf for the errmsg
rather than a (potentially too small) buffer for the format string.
* fork.cc (fork): Use "%s" with system_printf now.
With "%C" format string, argument may convert in up to MB_LEN_MAX bytes.
Relying on sys_wcstombs to add a trailing zero here requires us to
provide a large enough buffer.
* smallprint.c (__small_vsprintf): Use MB_LEN_MAX+1 bufsize for "%C".
The third argument of RtlLookupFunctionEntry actually is documented as
_Inout_opt_ for both x64 and ARM, although generic doc says _Out_ only.
* exceptions.cc (__unwind_single_frame): Initialize hist variable.
In order to avoid the year 2038 problem, define time_t to a signed
integer with at least 64-bits. The type for time_t can be forced to
long with the --enable-newlib-long-time_t configure option or with the
_USE_LONG_TIME_T system configuration define.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Always use the __-decorated form of an attribute name in public
headers, as the bareword form is in the user's namespace, and we
don't want compilation to break just because the user defines the
bareword to mean something else.
Signed-off-by: Eric Blake <eblake@redhat.com>
- pthread_mutex::lock now takes a PLARGE_INTEGER timeout pointer
and uses that in the call to cygwait.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Introduce inline helper pthread_convert_abstime. It converts
an absolute timespec to a Windows LARGE_INTEGER timestamp,
depending on the used clock.
- Use this function from pthread_cond_timedwait and semaphore::timedwait
- Merge semaphore::_wait and semaphore::_timedwait into single _wait
method, taking a LARGER_INTEGER timestamp.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This is copied from musl (MIT license). This is newer and more thorough
than that of FreeBSD currently shipped only on Cygwin.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
For historical reasons peek_console was calling the functions
PeekConsoleInputA and ReadConsoleInputA. However, these functions are
not working correctly under at least codepage 65001 (UTF-8) on systems
prior to Windows 10.
Use PeekConsoleInputW and ReadConsoleInputW instead, which work
correctly under all systems and all codepages.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
FillConsoleOutputCharacterA doesn't work correctly in codepage 65001
(UTF-8). Looks like the character conversion function from ascii char
to unicode char works incorrectly then. Use FillConsoleOutputCharacterW
instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far we had two functions checking the content of a reparse point,
readdir_check_reparse_point in fhandler_disk_file.cc for the sake of
readdir, and symlink_info::check_reparse_point for the sake of
generic path checking.
* Rename check_reparse_point_target helper to check_reparse_point_string
and convert to static function.
* Create new check_reparse_point_target helper containing the core
reparse point checking code
* Just call check_reparse_point_target from readdir_check_reparse_point
and symlink_info::check_reparse_point and only perform the unique
task in those functions.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
struct sigaction is POSIX.1-1990 but siginfo_t, which is used by its
sa_sigaction member, is POSIX.1b-1993. Therefore it needs to be guarded
as well, and as part of a union, the struct size is protected.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Error messages of regtool can't be read, which are encoded in,
for instance, SHIFT_JIS in Japanese Windows. Fix by using
wide chars instead of multibyte.
When SA_RESTART is not set on a socket, a blocking send() that is
interrupted mid-transition by a signal should return success (and
report just how many bytes were actually transmitted).
The err variable used here was not always guaranteed to be set
correctly in the loop, so better to just remove it and call
WSAGetLastError() explicitly.
There are two common sigpause variants, both of which take an int argument.
If you request _XOPEN_SOURCE or _GNU_SOURCE, you get the System V version,
which removes the given signal from the process's signal mask; otherwise
you get the BSD version, which sets the process's signal mask to the given
value.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
So far Cygwin's readdir returned the inode number of a mount target
in d_ino, rather than the actual inode number of the mount point in
the underlying filesystem. This not only results in a performance
hit if the mount target is a remote FS, it is also not done on other
POSIX systems.
Remove the code evaluating the mount target inode number.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen
Jozef Lawrynowicz
Ken Brown
Mark Geisert
David McFarland
Sebastian Huber
J.H. van de Water
Yaakov Selkowitz
Takashi Yano
Sergejs Lukanihins
Thomas Wolff
David Macek
Brian Inglis
Jon Turney
Xiaofeng Liu
Erik M. Bray
Yaakov Selkowitz
Michael Haubenwallner
Achim Gratz
Eric Blake
Fujii Hironori
Joe_Lowe