These targets don't actually cross-compile -- they try to pull some
objects out of the host's /lib/libc.a, /lib/libm.a, and /lib/crt0.o
directly and merge them into newlib's own libraries. This is hard
to keep working and impossible to test. Considering the vintage of
such targets, and gcc dropping them many many years ago, drop them
from newlib too. This will make cleaning up the build a lot easier.
This was only ever used for i?86-pc-linux-gnu targets, but that's been
broken for years, and has since been dropped. So clean this up too.
This also deletes the funky objectlist logic since it only existed for
the libtool libraries. Since it was the only thing left in the small
Makefile.shared file, we can punt that too.
This was added 20+ years ago. It seems to have very few (or no users)
as it only works on 32-bit x86 GNU/Linux (i.e. glibc) systems, and even
then only with old versions of glibc. It hasn't compiled in at least 5
years, but most likely been broken for more like 15 years -- it relies
on internal glibc APIs (like linuxthreads), and that code has changed
and been deleted significantly since.
This single target ends up dragging in a lot of non-trivial code that is
hard to keep working, and currently impossible to verify -- the libtool
and iconvdata and sys/linux/ code isn't used by anything else, but ends
up touching just about every build file in the tree. Punt the target so
we can start stripping out all these unique code paths.
This commit by itself just disables the target. We'll start deleting the
individual unused pieces in followups.
We've been using both libc_cv_ and newlib_cv_ for our cache vars.
Let's consolidate on newlib_cv_ to avoid conflicts with glibc which
is already using the libc_cv_ prefix.
This code snippet assumed it was only ever run in the top configure
script where srcdir would point to newlib/ which is parallel to the
winsup/ tree. This is incorrect for all of the subdir configure
scripts leading to bad -I flags in $(CC). Switch it over to the
new abs_newlib_basedir which should work in all subdirs.
This define is only used by newlib internally, so stop exporting it
as HAVE_INITFINI_ARRAY since this can conflict with defines packages
use themselves.
We don't really need to add _ to HAVE_INIT_FINI too since it isn't
exported in newlib.h, but might as well be consistent here.
We can't (easily) add this to newlib_cflags like HAVE_INIT_FINI is
because this is based on a compile-time test in the top configure,
not on plain shell code in configure.host. We'd have to replicate
the test in every subdir in order to have it passed down.
Use the same name as glibc & gnulib to indicate "newlib itself is
being compiled". This also harmonizes the codebase a bit in that
_LIBC was already used in places instead of _COMPILING_NEWLIB.
Building for bfin-elf, mips-elf, and x86_64-pc-cygwin produces
the same object code.
The _COMPILING_NEWLIB symbol is for declaring "the code is being
compiled for newlib itself" so headers can change behavior vs the
header being used by users (who should get the normal clean API).
Unfortunately, this symbol is defined inconsistently leading to it
only being useful for a few subsections of the tree.
Pull it out so that it's defined all the time for all targets.
This patch to the libc/machine/nvptx port of newlib implements an
approximation of "clock" and provides some additional stub routines.
These changes not only reduce the number of (link) failures in the GCC
testsuite when targeting nvptx-none, but also allow the NIST scimark4
benchmark to compile and run without modification.
newlib already contains support for backends to provide their own
clock implementations via -DCLOCK_PROVIDED. That functionality is
used here to return an approximate elapsed time based on the NVidia
GPU's clock64 cycle counter. Although not great, this is better than
the current behaviour of link error from the unresolved symbol
_times_r.
The other part of the patch is to add a small number of stub functions
to nvptx's misc.c. Adding isatty, for example, resolves linking
problems in libc from the dependency in __smakebuf_r, and the sync
stub, for example, fixes the failure with GCC's
testsuite/gfortran.dg/ISO_Fortran_binding_14.f90 [which simply tests
that gfortran can call a/any C function].
newlib/
configure.host: Add -DCLOCK_PROVIDED to newlib_cflags on nvptx*.
newlib/libc/machine/nvptx
Makefile.am: Add clock.c to lib_a_SOURCES.
clock.c: New source file to implement/approximate clock().
misc.c: Add stubs for fstat, isatty, open, sync and unlink.
Add a directory libc/machine/shared_x86 to share header files
between ix86 and x86_64 architectures.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far the build mechanism in newlib only allowed to either define
machine-specific headers, or headers shared between all machines.
In some cases, architectures are sufficiently alike to share header
files between them, but not with other architectures. A good example
is ix86 vs. x86_64, which share certain traits with each other, but
not with other architectures.
Introduce a new configure variable called "shared_machine_dir". This
dir can then be used for headers shared between architectures.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- also change the handling of default_newlib_reent_check_verify to
be the same as other default variables in configure.host
- regenerate newlib/configure
The TI proprietary toolchain uses nonstandard names for some math
library functions. In order to achieve ABI compatibility between
GNU and TI toolchains, add support for the TI function names.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
- change sys/reent.h to replace _REENT_CHECK_DEBUG with
_REENT_CHECK_VERIFY which when set asserts that any memory
allocated is non-NULL and calls __assert_func directly
- add new --enable-newlib-reent-check-verify configure option
- add support for configure.host to specify default for
newlib_reent_check_verify
- add _REENT_CHECK_VERIFY macro support to acconfig.h and newlib.hin
From: Kwok Cheung Yeung <kcy@codesourcery.com>
This patch adds enough support for constructors/destructors and OS functions
to be able to link and run gfortran programs on AMD GCN.
There's no actual ability to do I/O operations on this targets, besides
"write" to stdout and stderr, so most of the functions are just stubs.
Add support for the AMD GCN GPU architecture. This is primarily intended for
use with OpenMP and OpenACC offloading. It can also be used for stand-alone
programs, but this is intended mostly for testing the compiler and is not
expected to be useful in general.
The GPU architecture is highly parallel, and therefore Newlib must be
configured to use dynamic re-entrancy, and thread-safe malloc.
The only I/O available is a via a shared-memory interface provided by libgomp
and the gcn-run tool included with GCC. At this time this is limited to
stdout, argc/argv, and the return code.
The new GCC port for OpenRISC will use the init_fini_array only and not
provide the init() and fini() functions. Disable the function usage by
default as its no longer needed.
Signed-off-by: Stafford Horne <shorne@gmail.com>
It's been a while... I see the CRIS port broke with the
time_t-default-to-64-bit change, observable by a few test-cases in the gcc
fortran(!) tests failing, regressing when trying a recent newlib.
This is a two-part belt-and-suspenders change: adjust the CRIS port
gettimeofday syscall (the only one in newlib/CRIS passing a time_t or
struct timeval) to handle a userspace 64-bit time_t and secondly default
time_t to 32-bit long anyway. I considered making the local
"kernel_timeval" copy in _gettimeofday conditional on (userspace) time_t
being 64 bits, but thought it not worth bothering with the few move insns.
The effect of a 64-bit time_t is however observable as longer simulation
time when running the gcc testsuite and as bigger binaries without any
actual upside from the larger time_t size, so I thought better make the
default for this port go back to being a "long" again.
Tested by running the gcc testsuite over the three combinations of two
parts of the patch and observing the expected changes. Committed.
newlib:
* configure.host (cris, crisv32): Default to "long" time_t.
Signed-off-by: Hans-Peter Nilsson <hp@axis.com>
Introduce new host configuration variable "have_init_fini" which is set
to "yes" by default. Override it for RISC-V to "no".
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
- From: Cesar Philippidis <cesar@codesourcery.com>
Date: Tue, 10 Apr 2018 14:43:42 -0700
Subject: [PATCH] nvptx port
This port adds support for Nvidia GPU's, which are primarily used as
offload accelerators in OpenACC and OpenMP.
RTEMS provides the option to have a global or per-thread reentrancy
as part of application configuration. As part of this, RTEMS provides
the implementation of __getreent() as appropriate. Allow the target
to determine if this method is present in libc.a.
Newlib uses _times_r() in clock(). The problem is that the _times_r()
clock frequency is defined by sysconf(_SC_CLK_TCK). The clock frequency
of clock() is the constant CLOCKS_PER_SEC.
FreeBSD uses getrusage() for clock(). Since RTEMS has only one process,
the implementation can be simplified.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Intel MCU System V ABI are incompartible with i386 System V ABI:
o Minimum instruction set is Intel Pentium ISA minus x87 instructions
o No x87 or vector registers
o First three args are passed in %eax, %edx and %ecx
o Full specification available here:
https://github.com/hjl-tools/x86-psABI/wiki/iamcu-psABI-0.7.pdf
newlib/
* configure.host: Add new ix86-*-elfiamcu target
newlib/libc/include/
* setjmp.h: Change _JBLEN for Intel MCU target
newlib/libc/machine/i386/
* memchr.S: (memchr) Target-specific size-optimized version
* memcmp.S: (memcmp) Likewise
* memcpy.S: (memcpy) Likewise
* memmove.S: (memmove) Likewise
* memset.S: (memset) Likewise
* setjmp.S: (setjmp) Likewise
* strchr.S: (strchr) Likewise
* strlen.S: (strlen) Likewise
newlib/libc/stdlib/
* srtold.c: (__flt_rounds) Disable for Intel MCU
When running RTEMS paravirtualized in user space, the cli/sti instructions
can't be used. But I can't see why they are needed in either user or
supervisor state. Turning the use of them off for RTEMS.
This code is unmodified since the beginning of the repository, so I have
no insight into why it was done. I may even have been the one to add them.
Absolutely no idea except they aren't necessary.
Mike Frysinger
Roger Sayle
Dimitar Dimitrov
Corinna Vinschen
Jojo R
Eshan dhawan via Newlib
Jeff Johnston
Stafford Horne
Sebastian Huber
Christophe Lyon
Hans-Peter Nilsson
Jon Beniston
Jaap de Wolff
Jim Wilson
Joel Sherrill
Kito Cheng
Igor Venevtsev
Anton Kolesov
Eric Botcazou