reuse fhandler_virtual implementation to implement read and lseek.
The output from read(2) is modelled after the output when reading
from an mq file on Linux.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The POSIX entry points are just wrappers now, calling into
fhandler_mqueue. While at it, eliminate mqi_flags, replace with
standard fhandler nonblocking flag.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The mq_open call is just a framework now. This patch moves the
entire functionality into fhandler_mqueue. To support standard
OS calls (as on Linux), make fhandler_mqueue a derived class from
fhandler_disk_file and keep the base handle the handle to the
default stream, to allow implementing O_PATH functionlaity as well
as reading from the file and NOT reading binary message queue data.
Implement a standard fhandler_mqueue::open method, allowing, for
instance, to touch a file under /dev/mqueue and if it doesn't exist,
to create a message queue file.
FIXME: This introduces a BAD HACK into path_conv::check, which needs
reviewing.
Keep the posix path intact in the fhandler, and change get_proc_fd_name
accordingly to return only the basename plus leading slash for
/proc/<PID>/fd.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
POSIX message queues will be moved into NTFS streams.
Extend get_nt_native_path to provide a filename suffix which is not
subject to special character transposition, to allow specifying
a colon.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The default PSAPI_VERSION is controlled by WIN32_WINNT, which we set to
0x0a00 when building ldd, which gets PSAPI_VERSION=2.
This causes K32GetModuleFileNameEx to be used for GetModuleFileNameEx,
which isn't available on Windows Vista.
Define PSAPI_VERSION as 1 for the built executable to work on Windows
Vista.
This encapsulated creation, duplication, and closing of all
Windows objects connected to the message queue in the fhandler.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The function evaluating correctness of ipc object names was a
bit half-hearted. Fix the tests to follow more closely the
desriptions in the Linux man pages.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
build_fh_dev can take the POSIX object name as parameter anyway,
so use that and drop from mqinfo call.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Drop creating a unique ID, the queue name itself is already
unique. This allows to move ipc object generation into the
fhandler in the next step.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far, the mqd_t type returned a pointer to an allocated
area under the hood. The mutex and event objects attached
to the message queue were implemented as inheritable types.
As unfortunate side effect the HANDLEs to these objects
were inherited by exec'd child processes, even though all
other message queue properties are not inherted, per POSIX.
Fix this by converting an mqd_t to a descriptor, and create a
matching fhandler_mqueue object to handle various aspects of
the message queues inside the fhandler. Especially, create the
IPC objects as non-inheritable and duplicate the HANDLEs as
part of the fixup_after_fork mechanism.
Drop using mmap and create the memory map with NT functions.
This allows to control duplication of handle and mapping in the
forked child process, without the requirement to regenerate the
map in the same spot. It also allows to dup() the descriptor,
as on Linux, albeit this isn't implemented yet.
This patch is the first cut. There's a bit more to do, like
moving more functionality from the POSIX functions into the
fhandler and making sure the mqd_t type can't be used in other
descriptor-related functions willy-nilly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Avoid this warning:
[...]/winsup/utils/mingw/../path.cc:569:1: warning: 'void read_mounts() ' defined but not used [-Wunused-function]
569 | read_mounts ()
| ^~~~~~~~~~~
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Drop the unexpected behaviour to run chattr in the CWD if no file has
been specified on the command line. Bail out with usage info instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
chattr [mode] dir
incorrectly recurses one level into the given directory, even if the
--recursive option has not been used. This patch adds a test to avoid
this bug.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Allow multiple characters also in first '-mode' argument.
Use '-H' instead of '-h' for '--help' to fix ambiguity with
hidden attribute. Fix help and usage texts and documentation.
Signed-off-by: Christian Franke <christian.franke@t-online.de>
The previous patch is accidentally missing the declaration of
IsWow64Process2. Add it belatedly.
Fixes: 1865a41cb383 ("Cygwin: suppress FAST_CWD warnings on ARM64")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The old check was insufficient: new insider preview builds of Windows
allow running x86_64 process on ARM64. The IsWow64Process2 function
seems to be the intended way to figure this situation out.
This avoids MAX_PATH-related problems in native tools in case the
virtual drive points to a deep directory
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Move all the source files used in utils/mingw/ into that subdirectory,
so the built objects are in the expected place.
(path.cc requires some more unpicking, and even then there is genuinely
some shared code, so use a trivial file which includes the real path.cc
so the object file is generated where expected)
Rather than having testsuite.h do various things, depending on defines,
just have it do one thing, and then explicitly redirect to test stubs in
path.cc when building test.
Rather than fetching the system Windows directory at dll init time
only on 32 bit, fetch it on all platforms. Store as WCHAR and
UNICODE_STRING. Use where appropriate to simplify code.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
commit 456c3a4638 was only going half-way. It handled symlinks and
junction points as inner path components and made realpath return the
correct path, but it ignored drive letter substitution, i. e., virtual
drives created with, e. g.
subst X: C:\foo\bar
It was also too simple. Just returning an error code from
symlink_info::check puts an unnecessary onus on the symlink evaluation
loop in path_conv::check.
Rework the code to use GetFinalPathNameByHandle, and only do this after
checking the current file for being a symlink failed.
If the final path returned by GetFinalPathNameByHandle is not the same
as the incoming path, replace the incoming path with the POSIXified
final path. This also short-circuits path evaluation, because
path_conv::check doesn't have to recurse over the inner path components
multiple times if all symlinks are of a native type, while still getting
the final path as end result.
Virtual drives are now handled like symlinks. This is a necessary change
from before to make sure virtual drives are handled identically across
different access methods. An example is realpath(1) from coreutils. It
doesn't call readlink(2), but iterates over all path components using
lstat/readlink calls. Both methods should result in the same real path.
Fixes: 456c3a4638 ("path_conv: Try to handle native symlinks more sanely")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Converting to automake dropped the former, handwritten tags/ctags
target. This leads to a couple of problems:
- For no good reason the tags file gets written to the builddir
instead of to the srcdir where it's needed.
- `make tags' requires etags to exist, rather than checking if it
exists and skipping it.
- Adding the extra ctags arguments to AM_CTAGSFLAGS still results
in a shortened tags file.
(Temporary?) solution: Revert the old tags/ctags rules and silence
the automake warnings.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
autogen.sh expects to run from within the winsup dir, so
set CWD accordingly before running autotools.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
page/swap space name >= 40 or size/used >= 8 leaves no space between fields;
ensure a space after name and add extra tabs after size and used fields;
output appears like Linux 5.8 after changes to mm/swapfile(swap_show);
proc-swaps-space-before.log:
==> /proc/swaps <==
Filename Type Size Used Priority
/mnt/c/pagefile.sys file 11567748292920 0
/mnt/d/pagefile.sys file 12582912205960 0
proc-swaps-space-after.log:
==> /proc/swaps <==
Filename Type Size Used Priority
/mnt/c/pagefile.sys file 11567748 241024 0
/mnt/d/pagefile.sys file 12582912 182928 0
Install autoconf and automake, and run winsup/autogen.sh, and don't have
it silently ignore failures.
On AppVeyor:
- use latest VM image, to reduce time spent installing updates.
- run the testsuite, but ignore the result, as some tests don't work
correctly.
- hardcode the python-lxml and python-ply packages to install, so we get
ones for the right python.
- install texlive collections now needed to build documentation.
On github:
- Use a copr for cocom, since RPMSphere's package updates don't track
fedora:latest very efficently.
_mq_send as well as _mq_receive call ipc_mutex_unlock twice in case
of success, after having introduced __try/__except blocks.
Fixes: 3f3bd10104 ("* Throughout, use __try/__except/__endtry blocks, rather than myfault handler.")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
POSIX requires that message priorities range from 0 (low) to
sysconf(_SC_MQ_PRIO_MAX) - 1 (high). Cygwin's mq_send erroneously
allowed a message priority of sysconf(_SC_MQ_PRIO_MAX). Fix it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
We are building a ps executable, but the rule to build the target
collides with an auto-generated, documentation-related `ps' rule.
Work around that by naming the executable "cygps" at build time
and use a transform rule to rename it at installation time.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Specify toollibdir and toolincludedir in terms of tooldir, so the
install location is correct if tooldir is the default
($(exec_prefix)/$(target_alias)), or explicitly specified on the 'make'
command line.
Linux 5.12 Frozen Wasteland added features and changes:
add AMD 0x8000000a EDX:20 v_spec_ctrl virtual speculation control support
add Intel 0x00000007 ECX:24 bus_lock_detect bus lock detect debug exception
v2:
* Include tzmap.h in BUILT_SOURCES
* Make per-file flags appear after user-supplied CXXFLAGS, so they can
override optimization level.
* Correct .o files used to define symbols exported by libm.a
* Drop gcrt0.o mistakenly included in libgmon.a
* Add missing line continuations in GMON_FILES value
v3:
* use per-file flags for .c compilation
* override C{XX,}FLAGS, as they are set on the command line by top-level make
v4:
* Drop -Wno-error=write-strings from path_testsuite CXXFLAGS
v5:
* Update for changes in master
- Add -fno-threadsafe-statics to CXX flags
- Add hypotl.cc
- Remove fenv.cc (in favour of newlib), add fenv.c stub
- Add proc.5 manpage rules
Following POSIX and Linux, allow a connected DGRAM socket's connection
to be reset (so that the socket becomes unconnected). This is done by
calling connect and specifing an address whose family is AF_UNSPEC.
When connect is called on a DGRAM socket, the call to Winsock's
connect can immediately return successfully rather than failing with
WSAEWOULDBLOCK. Set the connect state to "connected" in this case.
Previously the connect state remained "connect_pending" after the
successful connection.
- In commit bb93c6d7, the race issue was not completely fixed. In
the pseudo console inheritance, if the destination process to
which the ownership of pseudo console switches, is found but exits
before switching, the inheritance fails. Currently, this extremely
rarely happens. This patch fixes the issue.
Commit 456c3a4638 added a workaround when handling paths with native
symlinks as inner path components. This patch introduced a problem for
paths handled by the WOW64 File System Redirector (FSR).
Fix this problem by not performing the new code from commit 456c3a4638
for paths under the Windows directory. Only do this in WOW64.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
For local paths, add a check if the inner path components contain native
symlinks or junctions. Compare the incoming path with the path returned
by NtQueryInformationFile(FileNameInformation). If they differ, there
must be at least one native symlink or junction in the path. If so,
treat the currently evaluated file as non-existant. This forces
path_conv::check to backtrack inner path components until we eliminated
all native symlinks or junctions and have a normalized path.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The simple newlib hypotl for real long double architectures is too
simple at this point. It's implemented as a real call to sqrtl(x^2+y^2).
This has a fatal tendency to overflow for big input numbers. Hypotl
isn't supposed to do that if the result would still be valid in range of
long double.
Given the complexity of implementing hypotl for various architectures,
we just take the hypotl function from Mingw-w64, which is in the public
domain.
Even though this hypotl is an architecture-independent implementation,
we can't use it for newlib yet, unfortunately, because it requires logbl
under the hood. Logbl is yet another function missing in newlib for
real long double architectures.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Use the more official fesetenv(FE_DFL_ENV) from _dll_crt0, thus
allowing to drop the _feinitialise declaration from fenv.h.
Provide a no-op _feinitialise in Cygwin as exportable symbol for really
old applications when _feinitialise was called from mainCRTStartup in
crt0.o.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Drop the Cygwin-specific fenv.cc and fenv.h file and use the equivalent
newlib functionality now, so we have at least one example of a user for
this new mechanism.
fenv.c: allow _feinitialise to be called from Cygwin startup code
fenv.h: add declarations for fegetprec and fesetprec for Cygwin only.
Fix a comment.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
An FD_CLOSE event sets a socket descriptor ready for writing.
This is incorrect if the FD_CLOSE is a result of shutdown(SHUT_RD).
Only set the socket descriptor ready for writing if the FD_CLOSE
is indicating an connection abort or reset error condition.
This requires to tweak fhandler_socket_wsock::evaluate_events.
FD_CLOSE in conjunction with FD_ACCEPT/FD_CONNECT special cases
a shutdown condition by setting an error code. This is correct
for accept/connect, but not for select. In this case, make sure
to return with an error code only if FD_CLOSE indicates a
connection error.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far select wrongly sets the descriptor as ready for exception
when a shutdown occurs. This is entirely non-standard. Only set
this bit on an out-of-band event.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Currently, functions/variables regarding the handles for cygwin
apps are with "_cyg", and those of handles for non-cygwin apps
are without "_cyg", such as get_handle_cyg() and get_handle().
This patch renames these to the names without "_nat" and with
"_nat" respectively, such as get_handle() and get_handle_nat().
When the Windows Store version of Python is installed, so-called "app
execution aliases" are put into the `PATH`. These are reparse points
under the hood, with an undocumented format.
We do know a bit about this format, though, as per the excellent analysis:
https://www.tiraniddo.dev/2019/09/overview-of-windows-execution-aliases.html
The first 4 bytes is the reparse tag, in this case it's
0x8000001B which is documented in the Windows SDK as
IO_REPARSE_TAG_APPEXECLINK. Unfortunately there doesn't seem to
be a corresponding structure, but with a bit of reverse
engineering we can work out the format is as follows:
Version: <4 byte integer>
Package ID: <NUL Terminated Unicode String>
Entry Point: <NUL Terminated Unicode String>
Executable: <NUL Terminated Unicode String>
Application Type: <NUL Terminated Unicode String>
Let's treat them as symbolic links. For example, in this developer's
setup, this will result in the following nice output:
$ cd $LOCALAPPDATA/Microsoft/WindowsApps/
$ ls -l python3.exe
lrwxrwxrwx 1 me 4096 105 Aug 23 2020 python3.exe -> '/c/Program Files/WindowsApps/PythonSoftwareFoundation.Python.3.7_3.7.2544.0_x64__qbz5n2kfra8p0/python.exe'
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The Windows Store version of Python (and apparently other Windows Store
applications) install a special reparse point called "app execution
alias" into the user's `PATH`.
These applications can be executed without any problem, but they cannot
be read as if they were files. This trips up Cygwin's beautiful logic that
tries to determine whether we're about to execute a Cygwin executable or
not: instead of executing the application, it will fail, saying
"Permission denied".
Let's detect this situation (`NtOpenFile()` helpfully says that this
operation is not supported on this reparse point type), and simply skip
the logic: Windows Store apps are not Cygwin executables (and even if
they were, it is unlikely that they would come with a compatible
`cygwin1.dll` or `msys-2.0.dll`).
This fixes https://github.com/msys2/MSYS2-packages/issues/1943
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
- Currently, names of output pipes are "pty%d-to-master" and "pty%d-
to-master-cyg" and names of input pipes are "pty%d-to-slave" and
"pty%d-from-master". With this patch, these pipes are renamed to
"pty%d-to-master-nat", "pty%d-to-master", "pty%d-from-master-nat"
and "pty%d-from-master" respectively.
- Currently, transfer input is triggered even if the stdin of native
app is not a pseudo console. With this patch it is triggered only
if the stdin is a pseudo console.
- If two non-cygwin apps are started simultaneously, attaching to
pseudo console sometimes fails. This is because the second app
trys to attach to the process not started yet. This patch avoids
the issue by attaching to the stub process rather than the other
non-cygwin app.
- Perhaps current code misunderstand meaning of the IGNBRK. As far
as I investigated, IGNBRK is concerned with break signal in serial
port but there is no evidence that it has effect to ignore Ctrl-C.
This patch stops ignoring Ctrl-C by IGNBRK for non-cygwin apps.
This reverts commit 532b91d24e.
It turned out that this patch has undesired side effects. To wit, if a
newer, post-uname_x executable was linked against or loading an older,
pre-uname_x DLL, and this DLL called uname. This call would jump into
the old uname with the old struct utsname as parameter, but given the
newer executable it would get redirected to uname_x. uname_x in turn
would overwrite stack memory it should leave well alone, given it
expects the newer, larger struct utsname.
For the entire discussion see the thread starting at
https://cygwin.com/pipermail/cygwin/2021-February/247870.html
and continuing in March at
https://cygwin.com/pipermail/cygwin/2021-March/247930.html
For a description where we're coming from, see
https://cygwin.com/pipermail/cygwin/2021-March/247959.html
While we *could* make the scenario in question work by patching dlsym,
the problem would actually be the same, just for dynamic loading. In
the end, we're missing the information, which Cygwin version has been
used when building DLLs.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- If two non-cygwin apps are started simultaneously and this is the
first execution of non-cygwin apps in the pty, these occasionally
hang up. The cause is the race issue between term_has_pcon_cap(),
reset_switch_to_pcon() and setup_pseudoconsole(). This patch fixes
the issue.
linkat(olddirfd, oldpath, oldname, newdirfd, newname, AT_EMPTY_PATH)
is supposed to create a link to the file referenced by olddirfd if
oldname is the empty string. Currently this is done via the /proc
filesystem by converting the call to
linkat(AT_FDCWD, "/proc/self/fd/<olddirfd>", newdirfd, newname,
AT_SYMLINK_FOLLOW),
which ultimately leads to a call to the appropriate fhandler's link
method. Simplify this by using cygheap_fdget to obtain the fhandler
directly.
If linkat(2) is called with AT_EMPTY_PATH on an AF_LOCAL or
AF_UNIX socket that is not a socket file, the current code calls
fhandler_disk_file::link in most cases. The latter expects to be
operating on a disk file and uses the socket's io_handle, which
is not a file handle.
Fix this by calling fhandler_disk_file::link only if the
fhandler_socket object is a file (determined by testing
dev().isfs()).
Also fix the case of a socket file opened with O_PATH by setting
the fhandler_disk_file's io_handle.
If facl(2) is called on an AF_LOCAL or AF_UNIX socket that is not a
socket file, the current code calls fhandler_disk_file::facl in most
cases. The latter expects to be operating on a disk file and uses the
socket's io_handle, which is not a file handle.
Fix this by calling fhandler_disk_file::facl only if the
fhandler_socket object is a file (determined by testing dev().isfs()).
If fchown(2) is called on an AF_LOCAL or AF_UNIX socket that is not a
socket file, the current code calls fhandler_disk_file::fchown in most
cases. The latter expects to be operating on a disk file and uses the
socket's io_handle, which is not a file handle.
Fix this by calling fhandler_disk_file::fchown only if the
fhandler_socket object is a file (determined by testing dev().isfs()).
If fchmod(2) is called on an AF_LOCAL or AF_UNIX socket that is not a
socket file, the current code calls fhandler_disk_file::fchmod in most
cases. The latter expects to be operating on a disk file and uses the
socket's io_handle, which is not a file handle.
Fix this by calling fhandler_disk_file::fchmod only if the
fhandler_socket object is a file (determined by testing dev().isfs()).
If fstatvfs(2) is called on an AF_LOCAL or AF_UNIX socket that is not
a socket file, the current code calls fhandler_disk_file::fstatvfs in
most cases. The latter expects to be operating on a disk file and
uses the socket's io_handle, which is not a file handle.
Fix this by calling fhandler_disk_file::fstatvfs only if the
fhandler_socket object is a socket file (determined by testing
dev().isfs()).
If fstat(2) is called on an AF_LOCAL or AF_UNIX socket that is not a
socket file, the current code calls fstat_fs. The latter expects to
be operating on a disk file and uses the socket's io_handle, which is
not a file handle.
Fix this by calling fstat_fs only if the fhandler_socket object is a
file (determined by testing dev().isfs()).
This is in the spirit of the Linux requirement that file operations
like fchmod(2), fchown(2), and fgetxattr(2) fail with EBADF on files
opened with O_PATH.
This was done for the fhandler_socket_local class in commits
3a2191653a, 141437d374, and 477121317d, but the fhandler_socket_unix
class was overlooked.
When a FIFO is opened, syscalls.cc:open always calls fstat on the
newly-created fhandler_fifo. This results from a call to
device_access_denied.
To speed-up this fstat call, and therefore the open(2) call, use
PC_KEEP_HANDLE when the fhandler is created. The resulting
conv_handle is retained until after the fstat call if the fhandler is
a FIFO; otherwise, it is closed immediately.
Previously, the call to get_file_attribute for FIFOs set the first
argument to NULL instead of the handle h returned by get_stat_handle,
thereby forcing the file to be opened for fetching the security
descriptor in get_file_sd(). This was done because h might have been
a pipe handle rather than a file handle, and its permissions would not
necessarily reflect those of the file.
That situation can no longer occur with the new fhandler_fifo::fstat
introduced in the previous commit.
Previously fstat on a FIFO would call fhandler_base::fstat.
The latter is not appropriate if fhandler_fifo::open has already been
called (and O_PATH is not set), for the following reason. If a FIFO
has been opened as a writer or duplexer, then it has an io_handle that
is a pipe handle rather than a file handle. fhandler_base::fstat will
use this handle and potentially return incorrect results. If the FIFO
has been opened as a reader, then it has no io_handle, and a call to
fhandler_base::fstat will lead to a call to fhandler_base::open.
Opening the fhandler a second time can change it in undesired ways;
for example, it can modify the flags and status_flags.
The new fhandler_fifo::fstat avoids these problems by creating an
fhandler_disk_file and calling its fstat method in case
fhandler_fifo::open has already been called and O_PATH is not set.
Consider this case:
- Cygwin installed in C:\cygwin64
- mklink /j D:\cygwin64 C:\cygwin64
- create testcase calling
realpath("/", result);
printf ("%s\n", result);
- start cmd
>C:\cygwin64\bin\bash -lc <path-to-testcase>
/
>D\cygwin64\bin\bash -lc <path-to-testcase>
/cygdrive/c/cygwin64
This scenario circumventing the mount point handling which is automated
in terms of /, depending on the path returned from GetModuleFileNameW
for the Cygwin DLL. When calling D:\cygwin64\bin\bash the dir returned
from GetModuleFileNameW is D:\cygwin64\bin, thus root is D:\cygwin64.
However, junctions are treated as symlinks in Cygwin which explains why
the path gets converted to a cygdrive path.
Fix this by calling GetFinalPathNameByHandleW on the result from
GetModuleFileNameW to get the correct root path, even if accessed via
a junction point.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This only affects the very seldom bordercase of apps calling setmode(fd,
0) on fhandlers not calling fhandler_base::set_open_status(). All
fhandlers not calling set_open_status() are binary mode only, but the
way reset_to_open_binmode worked, calling setmode(fd, 0) would have
"reset" their open flags to O_TEXT accidentally.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- If ENABLE_LINE_INPUT is set, Ctrl-S is handled by Windows if the
OS is Windows 7. This conflicts with Ctrl-S handling in cygwin
console code. This patch unsets ENABLE_LINE_INPUT flag in cygwin
and set it when native app is executed.
- If ENABLE_VIRTUAL_TERMINAL_INPUT is not set, changing window height
does not generate WINDOW_BUFFER_SIZE_EVENT. This happens if console
is in the legacy mode. Therefore, with this patch, the windows size
is checked every time in cons_master_thread() if the cosole is in
the legacy mode.
Linux 5.11 💕 Valentine's Day Edition 💕 added features and changes:
add Intel 0x00000007 EDX:23 avx512_fp16 and 0x00000007:1 EAX:4 avx_vnni;
group scattered AMD 0x8000001f EAX Secure Mem/Encrypted Virt features at end:
0 sme, 1 sev, 3 sev_es (more to come not yet displayed)
- Currently, Ctrl-Z, Ctrl-\ and SIGWINCH does not work in console
if the process does not call read() or select(). This is because
these are processed in process_input_message() which is called
from read() or select(). This is a long standing issue of console.
Addresses:
https://cygwin.com/pipermail/cygwin/2020-May/244898.htmlhttps://cygwin.com/pipermail/cygwin/2021-February/247779.html
With this patch, new thread which handles only input signals is
introduced so that Crtl-Z, etc. work without calling read() or
select(). Ctrl-S and Ctrl-Q are also handled in this thread.
change notes to see "Implementation Notes" to xref to std-notes;
add xref to std-notes to getrlimit, setrlimit;
add note to document limitations of getrlimit, setrlimit resources support
- Currently, console read() keeps reading after SIGWINCH is sent
even if SA_RESTART flag is not set. With this patch, read()
returns EINTR on SIGWINCH if SA_RESTART flag is not set.
The same problem for SIGQUIT and SIGTSTP has also been fixed.
- Currently, input transfer is performed every time one line is read(),
if the non-cygwin app is running in the background. With this patch,
transfer is triggered by setpgid() rather than read() so that the
unnecessary input transfer can be reduced much in that situation.
Per discussion on cygwin-developers, a Cygwin tmpfile(3) implementation
has been added to syscalls.cc. This overrides the one supplied by
newlib. Then the open(2) flag O_TMPFILE was added to the open call that
tmpfile internally makes.
This v2 patch removes O_CREAT from open() call as O_TMPFILE obviates it.
Note that open() takes a directory's path but returns an fd to a file.
Analyzing the fhandler::copyto logic shows that the fhandler_base::reset
method was only called from copyto anyway.
Trying to convert reset to a protected method uncovered that the copyto
method is actually thought upside down from an object oriented POV.
Rather than calling copyto, manipulating the object given as parameter,
rename the method to copy_from, which manipulates the calling object
itself with data from the object given as parameter.
Eventually make reset a protected method and rename it to
_copy_from_reset_helper to clarify it's only called from copy_from.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
path_conv_handle::dup calls DuplicateHandle unconditionally,
but we only have a handle in some cases. Check handle for being
non-NULL before calling DuplicateHandle.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
path_conv::reset_conv_handle is only called after fhandler::copyto
has been called. This duplicated the path_conv_handle if there was
one, so just setting the conv handle to NULL potentially produces a
handle leak. Replace reset_conv_handle calls with calls to
close_conv_handle and drop the reset_conv_handle method.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
There's a slim chance that duplicating fhandlers may end up duplicating
path_conv_handle handles twice ending up with a handle leak, due to
fhandler_base::reset calling path_conv::operator<< after the only
caller, fhandler::copyto, already called path_conv::operator=.
Just drop the call which basically duplicates what path_conv::operator=
already did.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This reverts commit 76dca77f04. That
commit was based on the incorrect assumption that get_stat_handle,
when called on a FIFO in fstat_helper, would always return a handle
that is safe to use for getting the file information.
That assumption is true in many cases but not all. For example, if
the call to fstat_helper arises from a call to fstat(2) on a FIFO that
has been opened for writing, then get_stat_handle will return a pipe
handle instead of a file handle.
Allow check_reparse_point_target to recognize reparse points with
reparse tag IO_REPARSE_TAG_AF_UNIX. These are used in recent versions
of Windows 10 to represent AF_UNIX sockets.
check_reparse_point_target now returns PATH_REP on files of this type,
so that they are treated as known reparse points (but not as sockets).
This allows tools like 'rm', 'ls', etc. to operate on these files.
Addresses: https://cygwin.com/pipermail/cygwin/2020-September/246362.htmlhttps://cygwin.com/pipermail/cygwin/2021-January/247666.html
The new header defines some Cygwin-specific limits, using private
names. It is included by include/limits.h.
For example, we now have
#define __OPEN_MAX 3200
in include/cygwin/limits.h and
#define OPEN_MAX __OPEN_MAX
in include/limits.h. The purpose is to hide implementation details
from users who view <limits.h>.
Replace all occurrences of OPEN_MAX_MAX by OPEN_MAX, and define the
latter to be 3200, which was the value of the former. In view of the
recent change to getdtablesize, there is no longer a need to
distinguish between these two macros.
Now that getdtablesize always returns OPEN_MAX_MAX, we can simplify
sysconf(_SC_OPEN_MAX) and getrlimit(RLIMIT_NOFILE) to just use that
same constant instead of calling getdtablesize.
According to the Linux man page for getdtablesize(3), the latter is
supposed to return "the maximum number of files a process can have
open, one more than the largest possible value for a file descriptor."
The constant OPEN_MAX_MAX is the only limit enforced by Cygwin, so we
now return that.
Previously getdtablesize returned the current size of cygheap->fdtab,
Cygwin's internal file descriptor table. But this is a dynamically
growing table, and its current size does not reflect an actual limit
on the number of open files.
With this change, gnulib now reports that getdtablesize and
fcntl(F_DUPFD) work on Cygwin. Packages like GNU tar that use the
corresponding gnulib modules will no longer use gnulib replacements on
Cygwin.
- Currently, thread created by pthread_create() is not suspended by
the signal SIGTSTP. For example, even if a process with a thread
is suspended by Ctrl-Z, the thread continues running. This patch
fixes the issue.
- Currently, read() returns -1 with EINTR if the process is suspended
by Ctrl-Z and resumed by fg command, while pty continues to read.
For example, xxd command stops with error "Interrupted system call"
after Ctrl-Z and fg. This patch aligns the behaviour with pty (and
Linux).
Allow fchmodat with the AT_SYMLINK_NOFOLLOW flag to succeed on
non-symlinks. Previously it always failed, as it does on Linux. But
POSIX permits it to succeed on non-symlinks even if it fails on
symlinks.
The reason for following POSIX rather than Linux is to make gnulib
report that fchmodat works on Cygwin. This improves the efficiency of
packages like GNU tar that use gnulib's fchmodat module. Previously
such packages would use a gnulib replacement for fchmodat on Cygwin.
- After commit bb428520, there has been the disadvantage:
7) Pseudo console cannot be activated if it is already activated for
another process on same pty.
This patch clears this disadvantage.
- After commit bb428520, there has been the disadvantage:
2) The apps which use console API cannot be debugged with gdb. This
is because pseudo console is not activated since gdb uses
CreateProcess() rather than exec(). Even with this limitation,
attaching gdb to native app, in which pseudo console is already
activated, works.
This patch clears this disadvantage.
- After commit bb428520, there has been the disadvantage:
4) Code page cannot be changed by chcp.com. Acctually, chcp works
itself and changes code page of its own pseudo console. However,
since pseudo console is recreated for another process, it cannot
inherit the code page.
This patch clears this disadvantage.
- PTY has a problem that the key input, which is typed during windows
native app is running, disappears when it returns to shell. This is
beacuse pty has two input pipes, one is for cygwin apps and the other
one is for native windows apps. The key input during windows native
program is running is sent to the second input pipe while cygwin
shell reads input from the first input pipe. This issue had been
fixed once by commit 29431fcb, however, the new implementation of
pseudo console support by commit bb428520 could not inherit this
feature. This patch realize transfering input data between these
two pipes bidirectionally by utilizing cygwin-console-helper process.
The helper process is launched prior to starting the non-cygwin app,
however, exits immediately unlike previous implementation.
Following POSIX, ensure that ctime is updated if chown succeeds,
unless the new owner is specified as (uid_t)-1 and the new group is
specified as (gid_t)-1. Previously, ctime was unchanged whenever the
owner and group were both unchanged.
Aside from POSIX compliance, this fix makes gnulib report that chown
works on Cygwin. This improves the efficiency of packages like GNU
tar that use gnulib's chown module. Previously such packages would
use a gnulib replacement for chown on Cygwin.
I think we don't need an extra flag as we can utilize: access & FILE_WRITE_ATTRIBUTES
What do you think?
Ben Wijen (1):
syscalls.cc: unlink_nt: Try FILE_DISPOSITION_IGNORE_READONLY_ATTRIBUTE
winsup/cygwin/ntdll.h | 3 ++-
winsup/cygwin/syscalls.cc | 22 +++++++--------
winsup/cygwin/wincap.cc | 11 ++++++++
winsup/cygwin/wincap.h | 56 ++++++++++++++++++++-------------------
4 files changed, 53 insertions(+), 39 deletions(-)
--
2.30.0
>From 2d0ff6fec10d03c24d11c747852018b7bc1136ac Mon Sep 17 00:00:00 2001
In-Reply-To: <20210122105201.GD810271@calimero.vinschen.de>
References: <20210122105201.GD810271@calimero.vinschen.de>
From: Ben Wijen <ben@wijen.net>
Date: Tue, 17 Dec 2019 15:15:25 +0100
Subject: [PATCH v3 1/8] syscalls.cc: unlink_nt: Try
FILE_DISPOSITION_IGNORE_READONLY_ATTRIBUTE
Implement wincap.has_posix_unlink_semantics_with_ignore_readonly and when set
skip setting/clearing of READONLY attribute and instead use
FILE_DISPOSITION_IGNORE_READONLY_ATTRIBUTE
Move post-dir unlink check from fhandler_disk_file::rmdir to
_unlink_nt_post_dir_check
If a directory is not removed through fhandler_disk_file::rmdir
we can now make sure the post dir check is performed.
- After the commit 72770148, script command exits occasionally with
the error "Bad file descriptor" if it is started in console on Win7
and non-cygwin process is executed. This patch fixes the issue.
- The buffer used in get_console_process_id(), introduced by commit
72770148, is too large and ERROR_NOT_ENOUGH_MEMORY occurs in Win7.
Therefore, the buffer size has been reduced.
The isdev_dev check in rmdir is unclean. Create a virtual method
fhandler_dev::rmdir to handle this transparently.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- cat exits immediately in the following senario.
1) Execute env CYGWIN=disable_pcon script
2) Execute cmd.exe
3) Execute cat in cmd.exe.
This is caused by setting input_available_event for the pipe for
non-cygwin app. This patch fixes the issue.
- The functions pty_master_thread() and pty_master_fwd_thread()
should be static (i.e. should not access class member) because
the instance is deleted if the master is dup()'ed and the first
master is closed. In this case, because the dup()'ed instance
still exists, these master threads are also still alive even
though the instance has been deleted. As a result, accesing
class members in these functions causes accessi violation.
Addresses:
https://cygwin.com/pipermail/cygwin-developers/2021-January/012030.html
- After commit 232fde0e, pty changes console code page when the first
non-cygwin app is executed. If pty is started in real console device,
pty changes the code page of root console. This causes very annoying
result because changing code page changes the font of command prompt
if console is in legacy mode. This patch avoids this by creating a
new invisible console for the first pty started in console device.
The old implementation for __cxa_guard_acquire did not return 1,
therefore dynamic initialization was never performed.
If concurrent-safe dynamic initialisation is ever needed, CXX ABI
must be followed when re-implementing __cxa_guard_acquire (et al.)
- The function close_pseudoconsole() should be static so that it
can be safely called in spawn.cc even after the fhandler_pty_slave
instance has been deleted. That is, there is a problem with the
current code. This patch fixes the issue.
- If application changes the console mode, mode management introduced
by commit 10d8c278 will be corrupted. For example, stdout of jansi
v2.0.1 or later is piped to less, jansi resets the xterm mode flag
ENABLE_VIRTUAL_TERMINA_PROCESSING when jansi is terminated. This
causes garbled output in less because less needs this flag enabled.
This patch fixes the issue.
- The workaround for rlwrap introduced by commit 8199b0cc does not
take effect for rlwrap 0.40 or later. This patch add a workaround
for rlwrap 0.40 or later as well.
Update to Linux next 5.10 cpuinfo flags for Intel SDM 36.7.1 Software
Guard Extensions, and 38.1.4 SGX Launch Control Configuration.
Launch control restricts what software can run with enclave protections,
which helps protect the system from bad enclaves.
- Previous workaround has a problem that screen is distorted if up
arrow key is pressed at the first line after running "rlwrap cmd".
This patch fixes the issue.
- Previous code to read response for CSI6n allows invalid response
such as "CSI Pl; Pc H" other than correct response "CSI Pl; Pc R".
With this patch, the response is checked more strictly.
if an application built after API version 334 loads uname dynamically,
it actually gets the old uname, rather than the new uname_x. Fix this by
checking the apps API version in uname and call uname_x instead, if it's
a newer app.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Sometimes timeout period in term_has_pcon_cap() may not be enough
when the machine slows down for some reason. This patch eases the
issue. In the new code, effective timeout period is expected to be
extended as a result due to slowing-down the wait loop as well when
the machine gets into busy.
The comment and debug output became obsolete in commit 23771fa1f7 when
dup_worker started calling fhandler_base::clone instead of build_fh_pc
and fhandler_base::operator=.
The existing code errors as EINVAL any attempt to set a value for
SO_PEERCRED via setsockopt() on an AF_UNIX/AF_LOCAL socket. But to
enable the workaround set_no_getpeereid behavior for Python one has
to be able to set SO_PEERCRED to zero. Ergo, this patch. Python has
no way to specify a NULL pointer for 'optval'.
This v2 of patch allows the original working (i.e., allow NULL,0 for
optval,optlen to mean turn off SO_PEERCRED) in addition to the new
working described above. The sense of the 'if' stmt is reversed for
readability.
On some systems /bin/sh is not /bin/bash and cygmagic has bash-isms in
it. So even though cygmagic has a /bin/bash shebang, it also needs to be
launched with bash from within Makefile.in.
https://cygwin.com/pipermail/cygwin/2020-December/246938.html
reports a problem where, when adding a Cygwin default symlink
to $PATH since Cygwin 3.1.5, $PATH handling appears to be broken.
3.1.5 switched to WSL symlinks as Cygwin default symlinks.
A piece of code in path handling skips resolving reparse points
if they are the last component in the path. Thus a reparse point
in $PATH is not resolved but converted to Windows path syntax
verbatim.
If you do this with a WSL symlink, certain WinAPI functions fail.
The underlying $PATH handling fails to recognize the reparse
point in $PATH and returns with STATUS_IO_REPARSE_TAG_NOT_HANDLED.
As a result, the calling WinAPI function fails, most prominently
so CreateProcess.
Fix this problem by adding a PATH_REP_NOAPI bit to path_types
and a matching method path_conv::is_winapi_reparse_point().
Right now this flag is set for WSL symlinks and Cygwin AF_UNIX
sockets (new type implemented as reparse points).
The aforementioned code skipping repare point path resolution calls
is_winapi_reparse_point() rather than is_known_reparse_point(),
so now path resolution is only skipped for reparse points known
to WinAPI.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This libltp is old as old dirt and still using K&R style.
If it's really to be used again at all, it needs a serious
refresh.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Network filesystems are not block devices. Apparently this code
hasn't been executed anyway, given how network filesystems are
hidden behind \Device\Mup.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Use fhandler_dev_floppy instead of fhandler_procsys for such devices.
The read()/write() functions from fhandler_procsys do not ensure
sector aligned transfers and lseek() fails always.
Signed-off-by: Christian Franke <franke@computer.org>
- If vim is executed in WSL in mintty, some garbage string caused
by "OSC Ps;? BEL/ST" will be shown in some situations. This patch
fixes the issue by removing "OSC Ps;? BEL/ST" from pseudo console
output.
Since we are now only configuring once, in winsup, with
AC_CONFIG_AUX_DIR(..), the auxiliary files are taken from the top-level.
(Previously we had a random assorment of AC_CONFIG_AUX_DIR(..) and
AC_CONFIG_AUX_DIR(../..) in winsup subdirectories, so auxiliary files
would be taken from winsup or the top-level.)
There's doesn't seem to be much use in independently distributing these
subdirectories, so allowing them to be independently configured seems
pointless and overcomplicated.
The order in which the subdirectories are built is still a little odd,
as cygwin is linked with libcygserver, and cygserver is then linked with
cygwin. So, we build the cygwin directory first, which invokes a build
of libcygserver in the cygserver directory, and then build in the
cygserver directory to build the cygserver executable.
Drop AC_CONFIGURE_ARGS, since we don't need to recursively call
configure with the same arguments anymore.
Slightly refine when we build utils: Previously we didn't build any
utils if MinGW compiler use was avoided, now we just avoid building
those utils which require that compiler.
Greatly simplify how winsup_srcdir and target_builddir are set, since
we're only configuring from one directory. (These are still kept
absolute, since we don't adjust them where used for being used in a
subdirectory).
Remove configure.cygwin and put it's (greatly reduced) contents inline
in the one place it's used now.
Remove generated configure and aclocal.m4 in subdirectories.
This has a test of the path translation code used in various utilities
(mount, cygpath, strace).
MOUNT_BINARY is replaced with the absence of MOUNT_TEXT since 26e0b37e.
The issys member of mnt_t struct was removed in b677a99b.
> $ make check
[...]
> total tests: 63
> pass : 63 (100.0%)
> fail : 0 (0.0%)
'-fno-exceptions -fno-rtti' are already present in the compile command
COMPILE.cc set by Makefile.common, so we don't need to add them to
CXXFLAGS as well.
Invoke grep in text mode when looking for version strings inside the
cygwin DLL, so it outputs something more informative than:
Binary file ../cygwin/cygwin0.dll matches
The overflow check in mEMALIGn erroneously checks for INT_MAX,
albeit the input parameter is size_t. Fix this to check for
__SIZE_MAX__ instead. Also, it misses to check the req against
adding the alignment before calling mALLOc.
While at it, add out-of-bounds checks to pvALLOc, nano_memalign,
nano_valloc, and Cygwin's (unused) dlpvalloc.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Replace the 'WCHAR pipe_name_buf[48]' class member by 'PWCHAR
pipe_name_buf', and allocate space for the latter as needed.
Change the default constructor to accommodate this change, and add a
destructor that frees the allocated space.
Also change get_pipe_name and clone to accommodate this change.
By default, libltp tests will create temporary files in a subdirectory
of /tmp, which will (nowadays) be located relative to the test DLL (by
assuming that it is in /bin). This will evaluate to the directory
$target_builddir/winsup/tmp, which doesn't exist.
The location used for these temporary files can be explicitly controlled
by setting the TDIRECTORY env var. Arrange to set that env var to the
/cygdrive path of a tmp subdirectory of the build directory.
Unfortunately, libltp doesn't clean the temporary directory if
TDIRECTORY is set, and some tests assume they are started in a clean
directory, so we need to do that in tcl.
Set the PATH so that tests can pick up cygwin0.dll. Looks like this was
dropped by accident in 2e488e95 ("Don't rely on in-build tools"), so
restore it as it was prior to 9d89f634.
Drop MINGW_FE, which I can't find any trace of, and instead detect and
use MinGW compilers.
This requires adding AC_CANONICAL_TARGET, to set $target_cpu.
This is now required as cygwin_build is defined in terms of
target_builddir.
(Note that in other subdirectories, the autoconf variable
target_builddir is AC_SUBST-ed as a side-effect of using a macro from
winsup/acinclude.m4, which is perhaps less than ideal)
The autoconf variable all_host is used to make building of the stub
library used by the testsuite conditional on not cross-compiling.
Make it unconditional, so we will notice if it's broken when
cross-compiling.
b55e3f19 was a bit too aggressive in dropping, rather than just
un-exporting these Makefile variables. We need to set these to the
configured host compiler if we are cross-compiling, otherwise they
default to the build compiler.
Also export CC to the mkvers.sh script (which requires it since
4eca5e6a). It's unclear why we can't just cause windres to use the
build 'cpp' as the pre-processor there.
The return value is now -NaN.
This fixes a bug in the mingw-w64 code that was imported into Cygwin.
The fix is consistent with Posix and Linux. It is also consistent
with the current mingw-w64 code, with one exception: The mingw-w64
code sets errno to EDOM if the input is -NaN, but this appears to
differ from Posix and Linux.
Addresses: https://cygwin.com/pipermail/cygwin/2020-October/246606.html
- Calling ResizePseudoConsole() generates some escape sequences.
Due to this behaviour, if the output of non-cygwin app is piped
to less, screen is sometimes distorted when the screen is resized.
With this patch, ResizePseudoConsole() is not called if stdout is
redirected.
- If output of non-cygwin process is piped to cygwin process, such
as less, the non-cygwin process sometimes fails to start and hangs.
This patch fixes the issue.
If MSG_WAITALL is set, recv_internal calls WSARecv or WSARecvFrom in a
loop, in an effort to fill all the scatter-gather buffers. The test
for whether all the buffers are full was previously incorrect.
ccwrap massages the compiler's standard include directories to remove
'/usr/include/w32api', with the intent of allowing it to be overriden by
'--with-windows-headers' (See 4c36016b).
I'm not 100% convinced that this is always working as desired, since in
some places w32api includes are done using <w32api/something.h>, which
will find them via the path /usr/include.
If this does turn out to be needed, this could also be implemented by
constructing the appropriate compiler flags once, rather than on every
compiler invocation.
As discussed in GCC bug 97088
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97088), parameters in
prototypes of library functions should use reserved names, or no name
at all.
This patch moves the internal struct __tzrule_struct to its own
internal header sys/_tz_structs.h. This is included from newlib's
time code as well as from Cygwin's localtime wrapper.
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@st.com>
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The autoconf variable LIBSERVER isn't defined, and it's value isn't
used. (The Makefile.in contains a literal value for the name of this
library instead).
This is only needed if we are using an ancient make which doesn't set
${MAKE}, but we say "This makefile requires GNU make." everywhere.
It only has an effect if @SET_MAKE@ is used, which we aren't doing
consistently.
Add linux-next 5.9 cpuinfo flag for Intel enqcmd/s instructions:
x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions:
Work submission instruction comes in two flavors. ENQCMD can be called
both in ring 3 and ring 0 and always uses the contents of a PASID MSR
when shipping the command to the device. ENQCMDS allows a kernel driver
to submit commands on behalf of a user process. The driver supplies the
PASID value in ENQCMDS. There isn't any usage of ENQCMD in the kernel as
of now.
The CPU feature flag is shown as "enqcmd" in /proc/cpuinfo.
If __WITH_AF_UNIX is defined when Cygwin is built, then a named
AF_UNIX socket is represented by a reparse point with a
Cygwin-specific tag and GUID. Make such files recognizable as reparse
points (but not as sockets) even if __WITH_AF_UNIX is not defined.
That way utilities such as 'ls' and 'rm' still behave reasonably.
This requires two changes:
- Define the GUID __cygwin_socket_guid unconditionally.
- Make check_reparse_point_target return PATH_REP on a reparse point
of this type if __WITH_AF_UNIX is not defined.
Commit aa467e6e, "Cygwin: add AF_UNIX reparse points to path
handling", changed check_reparse_point_target so that it could return
a positive value on a known reparse point that is not a symlink. But
some of the code in check_reparse_point that handles this positive
return value was executed unconditionally, when it should have been
executed only for symlinks.
As a result, posixify could be called on a buffer containing garbage,
and check_reparse_point could erroneously return a positive value on a
non-symlink. This is now fixed so that posixify is only called if the
reparse point is a symlink, and check_reparse_point returns 0 if the
reparse point is not a symlink.
Also fix symlink_info::check to handle this last case, in which
check_reparse_point returns 0 on a known reparse point.
The following Windows system calls currently fail with
STATUS_IO_REPARSE_TAG_NOT_HANDLED when called on an AF_UNIX socket:
- NtOpenFile in get_file_sd
- NtOpenFile in set_file_sd
- NtCreateFile in fhandler_base::open
Fix this by adding the FILE_OPEN_REPARSE_POINT flag to those calls
when the file is a known reparse point.
../../../../src/winsup/cygwin/pinfo.cc: In member function 'DWORD pinfo::status_exit(DWORD)':
../../../../src/winsup/cygwin/ntdll.h:21:68: error: narrowing conversion of '-536870295' from 'NTSTATUS' {aka 'int'} to 'unsigned int' [-Wnarrowing]
../../../../src/winsup/cygwin/pinfo.cc:136:10: note: in expansion of macro 'STATUS_ILLEGAL_DLL_PSEUDO_RELOCATION'
../../../../src/winsup/cygwin/sigproc.cc: In member function 'DWORD child_info::proc_retry(HANDLE)':
../../../../src/winsup/cygwin/ntdll.h:21:68: error: narrowing conversion of '-536870295' from 'NTSTATUS' {aka 'int'} to 'unsigned int' [-Wnarrowing]
../../../../src/winsup/cygwin/sigproc.cc:1120:10: note: in expansion of macro 'STATUS_ILLEGAL_DLL_PSEUDO_RELOCATION'
NT error statuses seem to be variously DWORD (unsigned) or NTSTATUS
(signed)? So use the one which doesn't cause problems here.
../../../../src/winsup/cygwin/fhandler_console.cc: In member function 'const unsigned char* fhandler_console::write_normal(const unsigned char*, const unsigned char*)':
../../../../src/winsup/cygwin/fhandler_console.cc:2782:8: error: narrowing conversion of '-2' from 'int' to 'long unsigned int' [-Wnarrowing]
../../../../src/winsup/cygwin/fhandler_console.cc:2786:8: error: narrowing conversion of '-1' from 'int' to 'long unsigned int' [-Wnarrowing]
../../../../src/winsup/cygwin/fhandler_console.cc:2836:8: error: narrowing conversion of '-2' from 'int' to 'long unsigned int' [-Wnarrowing]
../../../../src/winsup/cygwin/fhandler_console.cc:2840:8: error: narrowing conversion of '-1' from 'int' to 'long unsigned int' [-Wnarrowing]
A mbtowc_p function returns an int, so that seems the correct type to use here.
../../../../src/winsup/cygwin/fhandler_socket_inet.cc: In member function 'ssize_t fhandler_socket_wsock::send_internal(_WSAMSG*, int)':
../../../../src/winsup/cygwin/fhandler_socket_inet.cc:1381:69: error: suggest parentheses around assignment used as truth value [-Werror=parentheses]
Commit aa467e6e, "Cygwin: add AF_UNIX reparse points to path
handling", changed the return values of check_reparse_point_target.
Update the comment accordingly.
This was added as a temporary measure in commit e18f7f99 because it
wasn't yet in the mingw-w64 headers. With one exception, it is now in
the current release of the headers (version 8.0.0), so we don't need
it in winlean.h.
The exception is that VirtualAlloc2 is declared conditionally in
<w32api/memoryapi.h>, but the compilation of Cygwin requires it to
always be declared, even though it will only be executed on systems
that support it. So retain the declaration in winlean.h. And add
"WINAPI" to the declaration, as in memoryapi.h.
Add a check that version >= 8 of the mingw-w64 headers is intalled.
Also revert commit 3d136011, which was a related temporary workaround.
enumerate Vista, 7, 8, 10 progression to be clear, and earliest server 2008;
add 8.1, exclude S mode, add Cygwin32 on ARM, specify 64 bit only AMD/Intel
- Charset conversion for UTF-7, ISO-2022 and ISCII, which are not
supported in cygwin, does not work properly as a result. At the
expense of the above, the code has been simplified a bit.
If the process exited with e.g. STATUS_DLL_NOT_FOUND, also process the
file to look for not found DLLs.
(We currently only do this when a STATUS_DLL_NOT_FOUND exception occurs,
which I haven't managed to observe)
This still isn't 100% correct, as it only examines the specified file
for missing DLLs, not recursively on the DLLs it depends upon.
- If pseudo console is disabled, non-cygwin apps do not detect
console device. In this case, some apps output UTF-8 regardless
of the locale setting. At least git-for-windows, rust-based apps
and node.js do that. This patch provides backward compatibility
as default behaviour by setting console codepage to the charset of
the locale. Even in the cases above, garbled output is prevented
with this patch in most cases because mintty uses UTF-8 by default.
I beleave this is not really a problem in cygwin side but that in
app side, however, some users complain about garbled output with
existing apps in MSYS2 (which is based on cygwin) in which pseudo
console is disabled by default.
Setting up the pty in the master constructor ends up creating a new pty
on every stat(2) call on /dev/ptmx. Only do this when actually opening
the device, not when using the device class in another, non-opening
context.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Use tmp_pathbuf instead of HeapAlloc()/HeapFree().
- Remove mb_str_free() function.
- Consider the case where the multibyte string stops in the middle
of a multibyte char.
fhandler_process::exists is called when we are checking a path
starting with "/proc/<pid>/fd". If it returns virt_none and sets an
errno, there is no need for further checking. Just set 'error' and
return.
The incoming path is allowed to have the form "$PID/fd/[0-9]*/.*"
provided the descriptor symlink points to a directory. Check that
this is indeed the case.
The new function __eval_codepage_from_internal_charset
is a simplified version of the former code in
fhandler_tty.cc. It probably needs some extension,
but the gist is to use knowledge of internals to
be as quick as possible.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Both flags are outdated and collide with official flags in
sys/_default_fcntl.h, which may result in weird misbehaviour
of file functions.
O_NOSYMLINK is not used anyway.
O_DIROPEN is used in fhandler_virtual and derived classes.
The collision with O_NOFOLLOW results in spurious EISDIR
errors when, e. g., reading files in the registry.
fhandler_base::open_fs uses O_DIROPEN in the call to
fhandler_base::open, but it's not used in this context
further down the road.
Drop both flags and create an alternative "diropen" bool
flag in fhandler_virtual.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
...as on glibc right now. This is supposed to support autoconf scripts
checking for existence of these symbols in libpthread.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
GLibc will change this code in the forseeable future to align more
with FreeBSD, so this hack is not actually desired.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Pseudo console internally sends escape sequence CSI6n (query cursor
position) on startup of non-cygwin apps. If the terminal does not
support CSI6n, CreateProcess() hangs waiting for response. To prevent
hang, this patch disables pseudo console if the terminal does not
have CSI6n. This is checked on the first execution of non-cygwin
app using the following steps.
1) Check if the terminal support ANSI escape sequences by looking
into terminfo database. If terminfo has cursor_home (ESC [H),
the terminal is supposed to support ANSI escape sequences.
2) If the terminal supports ANSI escape sequneces, send CSI6n for
a test and wait for a responce for 40ms.
3) If there is a responce within 40ms, CSI6n is supposed to be
supported.
Also set-title capability is checked, and removes escape sequence
for setting window title if the terminal does not have the set-
title capability.
Currently, when using CYGWIN's error_start facility, the faulting
process isn't stopped while the error_start process is started when the
fault is caused by an exception. (it even seems possible in theory that
the faulting process could have exited before the error_start process
attaches).
This leads to e.g. the core dump written by CYGWIN='error_start=dumper'
in response to an exception being non-deterministic.
Remove the waitloop argument from try_to_debug(), only used in the
exception case, so the faulting process busy-waits until the error_start
process attaches.
Code archaeology to determine why the code is this way didn't really
turn up any answers, but this seems a low-risk change, as this only
changes the behaviour when:
- a debugger isn't already attached
- an error_start is specified in CYGWIN env var
- an exception has occurred which will be translated to a signal
If error_start invokes something which doesn't attach using
DebugActiveProcess(), we will spin indefinitely, but that will also
currently occur for any of the existing other uses of try_to_debug(),
which default to waitloop=TRUE.
On 32 bit x86, clang seems to miss loading input parameters based
on asm constraints for inline assembly that uses the x87 floating
registers, unless the snippet has got the volatile keyword.
Signed-off-by: Martin Storsjö <martin@martin.st>
Code taken from FreeBSD, which implements C11 threads as
wrapper around pthreads. Fix up machine/_threads.h which
is called from newlib's machine-independent threads.h to
match Cygwin's pthreads types.
Add the FreeBSD source files to libc subdir and take
opportunity to define LIBC_OFILES var in Makefile.
Add new symbols to common.din and sort symbols.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In preparation of importing FreeBSDs stdthreads functions,
change the way pthread_yield is exported, so that the symbol
can be used internally as well.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
pthread_yield was only declared under GNU visibility,
but the function should be available under BSD visibility
as well.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
POSIX requires that key destructors are called in a loop
for each key with a non-NULL value until all values are
NULL, or until all destructors for non-NULL values
have been called at least PTHREAD_DESTRUCTOR_ITERATIONS
(per POSIX: 4) times.
Cygwinonly called all destructors with non-NULL values
exactly once. This patch fixes Cygwin to follow POSIX.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
We need one more entry than max children in the arrays.
There's no reason to do this for the static array, though.
One more entry in the overflow array is sufficient.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
On PROC_EXEC_CLEANUP, the pinfo's in chld_procs are removed.
This is done in a loop always removing the child with index 0.
This, however, results in copying the last child's pinfo in
chld_procs to position 0. Do this for 100 children and you
get 99 entirely useless copy operations.
Fix this by calling remove_proc in reverse order.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
256 children per process is a bit tight in some scenarios.
Fix this by revamping the `procs' array. Convert it to an
extensible class child_procs and rename procs to chld_procs.
Fix code throughout to use matching class methods rather than
direct access.
To allow a lot more child processes while trying to avoid
allocations at DLL startup, maintain two arrays within class
child_procs, one using a default size for 255 (i686) or 1023
(x86_64) children, the other, dynamically allocated on overflowing
the first array, giving room for another 1023 (i686) or 4095
(x86_64) processes.
On testing with a simple reproducer on a x86_64 machine with
4 Gigs RAM, a system memory overflow occured after forking
about 1450 child processes, so this simple dynamic should
suffice for a while.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
pinfo::remember with the detach parameter set to true is
the only way to call proc_subproc with PROC_DETACHED_CHILD.
This call is exclusively used in spawn to set up a pinfo for
a detached child, and that pinfo goes out of scope right
afterwards without any further action.
Drop the flag and drop the detach parameter from pinfo::remember.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The return value is used in a numerical context and remove_proc
already returned inconsistently "true" vs. 0.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
After patch 23a779bf3d
"Cygwin: pinfo: stop remember doing reattach",
PROC_ADDCHILD actually just sets up a new child, mirroring
PROC_DETACHED_CHILD. The actual attaching of the child is
performed by action PROC_REATTACH_CHILD or pinfo::reattach
respectively.
To better reflect what's going on, rename PROC_REATTACH_CHILD
to PROC_ATTACH_CHILD and rename pinfo::reattach to pinfo::attach.
For better readability change PROC_ADDCHILD to PROC_ADD_CHILD.
Fix comments accordingly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
change all kinds of setup references to "the Cygwin Setup program";
emphasize 64 bit and deemphasize 32 bit;
update options list;
explain why installing everything is now extremely inadvisable, with stats
- In this implementation, pseudo console is created for each native
console app. Advantages and disadvantages of this implementation
over the previous implementation are as follows.
Advantages:
1) No performance degradation in pty output for cygwin process.
https://cygwin.com/pipermail/cygwin/2020-February/243858.html
2) Free from the problem caused by difference of behaviour of control
sequences between real terminal and pseudo console.
https://cygwin.com/pipermail/cygwin/2019-December/243281.htmlhttps://cygwin.com/pipermail/cygwin/2020-February/243855.html
3) Free from the problem in cgdb and emacs gud.
https://cygwin.com/pipermail/cygwin/2020-January/243601.htmlhttps://cygwin.com/pipermail/cygwin/2020-March/244146.html
4) Redrawing screen on executing native console apps is not necessary.
5) cygwin-console-helper is not necessary for the pseudo console
support.
6) The codes for pseudo console support are much simpler than that
of the previous one.
Disadvantages:
1) The cygwin program which calls console API directly does not work.
2) The apps which use console API cannot be debugged with gdb. This
is because pseudo console is not activated since gdb uses
CreateProcess() rather than exec(). Even with this limitation,
attaching gdb to native apps, in which pseudo console is already
activated, works.
3) Typeahead key inputs are discarded while native console app is
executed. Simirally, typeahead key inputs while cygwin app is
executed are not inherited to native console app.
4) Code page cannot be changed by chcp.com. Acctually, chcp works
itself and changes code page of its own pseudo console. However,
since pseudo console is recreated for another process, it cannot
inherit the code page.
5) system_printf() does not work after stderr is closed. (Same with
cygwin 3.0.7)
6) Startup time of native console apps is about 3 times slower than
previous implemenation.
7) Pseudo console cannot be activated if it is already activated for
another process on same pty.
Any C++ app that calls 'throw' on 64-bit Cygwin results in an
exception of type STATUS_GCC_THROW (0x20474343) generated by the C++
runtime. Don't pollute the strace output by printing information
about this and other GCC exceptions.
This is necessary in order to be consistent with the following comment
in the definition of _Unwind_RaiseException() in the GCC source file
libgcc/unwind-seh.c:
The exception handler installed in crt0 will continue any GCC
exception that reaches there (and isn't marked non-continuable).
Previously we failed to do this and, as a consequence, the C++ runtime
didn't call std::terminate after an unhandled exception.
This fixes the problem reported here:
https://cygwin.com/pipermail/cygwin/2019-October/242795.htmlhttps://sourceware.org/pipermail/cygwin/2020-August/245897.html
- After commit 095972ce5b, charset
conversion in mintty is broken if charset is set to other than
UTF-8. This seems to be caused because mintty does not set locale
yet at fork() call. This patch changes the timing of set_locale()
call again to avoid this issue.
- If native app is exec()'ed in a new pty, setup_locale() loses the
chance to be called. For example, with "mintty -e cmd", charset
conversion does not work as expected. This patch fixes the issue.
- If a lot of mintty are started in a short time from a mintty, some
of them hang with empty screen, crash immediately or hang on exiting
mintty. The following report seems to be related to this issue.
https://cygwin.com/pipermail/cygwin/2020-August/245751.html
The cause is not clear at all, but this patch seems to solve the
issue.
- update path to Unicode windowsZones.xml file
- drop Windows XP considerations
- regenerate tzmap.h
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This patch has been inspired by the Linux kernel patch
294f69e662d1 compiler_attributes.h: Add 'fallthrough' pseudo keyword for switch/case use
written by Joe Perches <joe AT perches DOT com> based on an idea from
Dan Carpenter <dan DOT carpenter AT oracle DOT com>. The following text
is from the original log message:
Reserve the pseudo keyword 'fallthrough' for the ability to convert the
various case block /* fallthrough */ style comments to appear to be an
actual reserved word with the same gcc case block missing fallthrough
warning capability.
All switch/case blocks now should end in one of:
break;
fallthrough;
goto <label>;
return [expression];
continue;
In C mode, GCC supports the __fallthrough__ attribute since 7.1,
the same time the warning and the comment parsing were introduced.
Cygwin-only: add an explicit -Wimplicit-fallthrough=5 to the build
flags.
Currently raw_read makes two passes through the list of clients. On
the first pass it tries to read from the client from which it last
read successfully. On the second pass it tries to read from all
connected clients.
Add a new pass in between these two, in which raw_read tries to read
from all clients that are in the fc_input_avail case. This should be
more efficient in case select was previously called and detected input
available.
Slightly tweak the first pass. If a client is marked as having the
last successful read but reading from it now finds no input, don't
unmark it unless we successfully read from a different client on one
of the later passes.
The fifo_reader thread function and the function select.cc:peek_fifo()
can both change the state of a fifo_client_handler. These changes are
made under fifo_client_lock, so there is no race, but the changes can
still be incompatible.
Add code to make sure that only one of these functions can change the
state from its initial fc_listening state. Whichever function does
this calls the fhandler_fifo::record_connection method, which is now
public so that peek_fifo can call it.
Slightly modify that method to make it suitable for being called by
peek_fifo.
Make a few other small changes to the fifo_reader thread function to
change how it deals with the STATUS_PIPE_CLOSING value that can
(rarely) be returned by NtFsControlFile.
Add commentary to fhandler_fifo.cc to explain fifo_client connect
states and where they can be changed.
Don't try to read from fifo_client_handlers that are in the fc_closing
state. Experiments have shown that this always yields
STATUS_PIPE_BROKEN, so it just wastes a Windows system call.
Re-order the values in enum fifo_client_connect_state to reflect the
new status of fc_closing.
Rename the existing set_state() to query_and_set_state() to reflect
what it really does. (It queries the O/S for the pipe state.) Add a
new set_state() method, which is a standard setter, and a
corresponding getter get_state().
fhandler_fifo::take_ownership() is called from select.cc::peek_fifo
and fhandler_fifo::raw_read and could potentially block indefinitely
if something goes wrong. This is always undesirable in peek_fifo, and
it is undesirable in a nonblocking read. Fix this by adding a timeout
parameter to take_ownership.
Arbitrarily use a 1 ms timeout in peek_fifo and a 10 ms timeout in
raw_read. These numbers may have to be tweaked based on experience.
Replace the call to cygwait in take_ownership by a call to WFSO.
There's no need to allow interruption now that we have a timeout.
fhandler_fifo::take_ownership() tacitly assumes that the current
owner's fifo_reader_thread will be woken up from WFMO when
update_needed_evt is signaled. But it's possible that the the current
owner's fifo_reader_thread is at the beginning of its main loop rather
than in its WFMO call when that event is signaled.
In this case the owner will never see that the event has been
signaled, and it will never update the shared fifo_client_handlers.
The reader that wants to take ownership will then spin its wheels
forever.
Fix this by having the current owner call update_shared_handlers at
the beginning of its loop, if necessary.
microcode is unsigned long long, printed by _small_sprintf using %x;
Cygwin32 used last 4 bytes of microcode for next field MHz, printing 0;
use correct _small_sprintf format %X to print microcode, producing
correct MHz value under Cygwin32
CPUID 7:0 EDX[14] serialize added in linux-next 5.8 by Ricardo Neri-Calderon:
The Intel architecture defines a set of Serializing Instructions (a
detailed definition can be found in Vol.3 Section 8.3 of the Intel "main"
manual, SDM). However, these instructions do more than what is required,
have side effects and/or may be rather invasive. Furthermore, some of
these instructions are only available in kernel mode or may cause VMExits.
Thus, software using these instructions only to serialize execution (as
defined in the manual) must handle the undesired side effects.
As indicated in the name, SERIALIZE is a new Intel architecture
Serializing Instruction. Crucially, it does not have any of the mentioned
side effects. Also, it does not cause VMExit and can be used in user mode.
This new instruction is currently documented in the latest "extensions"
manual (ISE). It will appear in the "main" manual in the future.
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/arch/x86/include/asm/cpufeatures.h?id=85b23fbc7d88f8c6e3951721802d7845bc39663d
Newlib's posix_spawn has been taken from FreeBSD. The code relies on
BSD-specific behaviour of vfork, namely the fact that vfork blocks
the parent until the child exits or calls execve as well as the fact
that the child shares parent memory in non-COW mode.
This behaviour can't be emulated by Cygwin. Cygwin's vfork is
equivalent to fork. This is POSIX-compliant, but it's lacking BSD's
vfork ingrained synchronization of the parent to wait for the child
calling execve, or the chance to just write a variable and the parent
will see the result.
So this requires a Cygwin-specific solution. The core function of
posix_spawn, called do_posix_spawn is now implemented twice, once using
the BSD method, and once for Cygwin using Windows synchronization under
the hood waiting for the child to call execve and signalling errors
upstream. The Windows specifics are hidden inside Cygwin, so newlib
only calls internal Cygwin functions.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Stop after we've written the dump in response to the initial breakpoint
EXCEPTION_DEBUG_EVENT we recieve for attaching to the process.
(rather than bogusly sitting there for 20 seconds waiting for more debug
events from a stopped process after we've already written the dump).
It's working on 32 bit OSes only anyway. It even fails on WOW64.
Drop unsupported NtMapViewOfSection flags.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Use the (undocumented) MEMORY_WORKING_SET_EX_INFORMATION in dumper to
determine if a MEM_IMAGE region is unsharable, and hence has been
modified.
After this, we will end up dumping memory regions where:
- state is MEM_COMMIT (i.e. is not MEM_RESERVE or MEM_FREE), and
-- type is MEM_PRIVATE and protection allows reads (i.e. not a guardpage), or
-- type is MEM_IMAGE and attribute is non-sharable (i.e. it was WC, got
written to, and is now a RW copy)
After this, we will end up dumping memory regions where:
- state is MEM_COMMIT (i.e. is not MEM_RESERVE or MEM_FREE), and
-- type is MEM_PRIVATE and protection allows reads (i.e. not a guardpage), or
-- type is MEM_IMAGE and protection allows writes
Making this decision based on the current protection isn't 100% correct,
because it may have been changed using VirtualProtect(). But we don't
know how to determine if a region is shareable.
(As a practical matter, anything which gets us the stack (MEM_PRIVATE)
and .data/.bss (RW MEM_IMAGE) is going to be enough for 99% of cases)
Commit 605bdcd410 enabled mapping beyond
EOF in 64 bit environments. But the variable 'orig_len' did not get
rounded up to a multiple of 64K. This rounding was done on 32 bit
only. Fix this by rounding up orig_len on 64 bit, in the same place
where 'len' is rounded up.
Rounding up is needed to make sigbus_page_len a multiple of the
allocation granularity.
In addition, failing to round up could cause orig_len to be smaller
than len. Since these are both unsigned values, the statement
'orig_len -= len' could then cause orig_len to be huge, and mmap would
fail with errno EFBIG.
I observed this failure while debugging the problem reported in
https://sourceware.org/pipermail/cygwin/2020-July/245557.html.
The failure can be seen by running the test case in that report under
gdb or strace.
- After commit 0365031ce1, key input
becomes not working by following steps.
1) Start cmd.exe in mintty.
2) Open another mintty.
3) Execute "echo AAA > /dev/pty*" (pty* is the pty opened in 1.)
This patch fixes the issue.
Use cygwait in take_ownership to allow interruption while waiting to
become owner. Return the cygwait return value or a suitable value to
indicate an error.
raw_read now checks the return value and acts accordingly.
If update_my_handlers fails to duplicate one or more handles, just
mark the corresponding handlers as being in an error state.
But if update_my_handlers is unable to open the process of the
previous owner, it's likely that something serious has gone wrong, so
we continue to make that a fatal error.
When a reader takes ownership in fifo_reader_thread, it now goes
directly to the part of the main loop that listens for a connection.
Previously it went back to the beginning of the loop.
Also, if the reader has to delay taking ownership because the previous
owner has not finished updating the shared fifo_client handlers, it
now checks to see if cancel_evt has been set. Previously it might
have had to spin its wheels unnecessarily only to eventually find that
its thread had been canceled.
Add a bool member 'last_read' to the fifo_client_handler structure,
which is set to true on a successful read. This is used by raw_read
as follows.
When raw_read is called, it first locates the writer (if any) for
which last_read is true. raw_read tries to read from that writer and
returns if there is input available. Otherwise, it proceeds to poll
all the writers, as before.
The effect of this is that if a writer writes some data that is only
partially read, the next attempt to read will continue to read from
the same writer. This should reduce the interleaving of output from
different writers.
When a reader opens, it needs to block if there are no writers open
(unless is is opened with O_NONBLOCK). This is easy for the first
reader to test, since it can just wait for a writer to signal that it
is open (via the write_ready event). But when a second reader wants
to open, all writers might have closed.
To check this, use a new '_nwriters' member of struct fifo_shmem_t,
which keeps track of the number of open writers. This should be more
reliable than the previous method.
Add nwriters_lock to control access to shmem->_nwriters, and remove
reader_opening_lock, which is no longer needed.
Previously only readers had access to the shared memory, but now
writers access it too so that they can increment _nwriters during
open/dup/fork/exec and decrement it during close.
Add an optional 'only_open' argument to create_shmem for use by
writers, which only open the shared memory rather than first trying to
create it. Since writers don't need to access the shared memory until
they have successfully connected to a pipe instance, they can safely
assume that a reader has already created the shared memory.
For debugging purposes, change create_shmem to return 1 instead of 0
when a reader successfully opens the shared memory after finding that
it had already been created.
Remove check_write_ready_evt, write_ready_ok_evt, and
check_write_ready(), which are no longer needed.
When opening a writer and looping to try to get a connection, recheck
read_ready at the top of the loop since the number of readers might
have changed.
To slightly speed up the process of opening the first reader, take
ownership immediately rather than waiting for the fifo_reader_thread
to handle it.
When the owning reader closes and there are still readers open, the
owner needs to wait for a new owner to be found before closing its
fifo_client handlers. This involves a loop in which dec_nreaders is
called at the beginning and inc_nreaders is called at the end. Any
other reader that tries to access shmem->_nreaders during this loop
will therefore get an inaccurate answer.
Fix this by adding an nreaders method and using it instead of
dec_nreaders and inc_nreaders. Also add nreaders_lock to control
access to the shmem->_nreaders.
Make various other changes to improve the reliability of finding a new
owner.
Since FD_CONNECT is only given once, we manually need to set
FD_WRITE for connection failed sockets to have consistent
behaviour in programs calling poll/select multiple times.
Example test to non-listening port: curl -v 127.0.0.1:47
If the acl_t struct was at or above 0x80000000 then the pointer was
sign-extended to 0xffff_ffff_8000_0000 and so the index was lost.
Signed-off-by: David Allsopp <david.allsopp@metastack.com>
This should slightly speed up especially path conversions,
given there's one less function call rearranging all function
arguments in registers/stack (and less stack pressure).
For clarity, rename overloaded sys_wcstombs to _sys_wcstombs
and sys_cp_mbstowcs to _sys_mbstowcs.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Re: CPU microcode reported wrong in /proc/cpuinfo
https://sourceware.org/pipermail/cygwin/2020-May/245063.html
earlier Windows releases used different registry values to store microcode
revisions depending on the MSR name being used to get microcode revisions:
add these alternative registry values to the cpuinfo registry value lookup;
iterate thru the registry data until a valid microcode revision is found;
some revision values are in the high bits, so if the low bits are all clear,
shift the revision value down into the low bits
sys_mbstowcs is called with the destination buffer length
set to MaximumLength from the receiving UNICODE_STRING buffer.
This is twice as much as the actual size of the buffer in
wchar_t units, which is the unit expected by sys_mbstowcs.
sys_mbstowcs always attaches a NUL, within the destination
buffersize given. But if the string is exactly one wchar_t
less than the actual buffer, and the buffersize is given too
large, sys_mbstowcs writes a NUL one wchar_t beyond the buffer.
This has only been exposed with Cygwin 3.1.5 because alloca
on newer gcc 9 apparently allocates more tightly. The alloca
buffer here is requested with 16 bytes, which is exactly the
number of bytes required for the string L"cmd.exe". Older gcc
apparently allocated a few more bytes on the stack, while gcc 9
allocates in 16 byte granularity...
Fix this by giving the correct destination buffer size to
sys_mbstowcs.
Fixes: https://cygwin.com/pipermail/cygwin/2020-June/245226.html
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Use WSAIoctl(SIO_KEEPALIVE_VALS) on older systems.
Make sure that keep-alive timeout is equivalent to
TCP_KEEPIDLE + TCP_KEEPCNT * TCP_KEEPINTVL on older systems,
even with TCP_KEEPCNT being a fixed value on those systems.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Drop definitions from <cygwin/sockets.h>
- Drop options only available on BSD
- Fix value of TCP_MAXSEG. It was still defined as the BSD value
while WinSock uses another value
- Handle the fact that TCP_MAXSEG is a R/O value in WinSock
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Return value of eat_readahead() is redefined. The return values
of fhandler_termios::eat_readahead() and fhandler_pty_slave::
eat_readahead() were little bit different. This patch unifies
them to number of bytes eaten by eat_readahead().
- Considerration for raixget() is added to fhandler_pty_master::
accept_input() code.
- Transfering contents of read ahead buffer in
fhandler_pty_master::transfer_input_to_pcon() is removed since
it is not necessary.
- fhandler_pty_slave::eat_readahead() ckecks EOL only when ICANON
is set.
- Guard for _POSIX_VDISABLE is added in checking EOL.
- If vim is started from WSL (Ubuntu) which is executed in pseudo
console in mintty, shift key and ctrl key do not work. Though
this issue is similar to the issue resolved by commit
4527541ec6, that commit is not
effective for this issue. This patch fixes the issue by discarding
"CSI > Pm m" in fhandler_pty_master::pty_master_fwd_thread().
- Commit c4b060e3fe seems to be not
enough. Moreover, it does not work as expected at all in Win10
1809. This patch essentially reverts that commit and add another
fix. After all, the cause of the problem was a race issue in
switch_to_pcon_out flag. That is, this flag is set when native
app starts, however, it is delayed by wait_pcon_fwd(). Since the
flag is not set yet when less starts, the data which should go
into the output_handle accidentally goes into output_handle_cyg.
This patch fixes the problem more essentially for the cause of
the problem than previous one.
- If the output of non-cygwin apps is browsed using less, screen is
ocasionally distorted after less exits. This frequently happens
if cmd.exe is executed after less. This patch fixes the issue.
- In current pty, the window title can not be set from non-cygwin
program due to the code which prevents overwriting the window
title to "cygwin-console-helper.exe" in fhandler_pty_master::pty_
master_fwd_thread(). This patch fixes the issue.
- If the cygwin vim is started from a non-cygwin process which is
executed in pseudo console, shift key and ctrl key do not work.
In this case, vim is executed under /dev/cons*. If vim outputs
escape sequence which is not supported by pseudo console, the
escape sequence is leaked into the parent pty. This causes
unexpected results. This patch fixes the issue by discarding
"CSI > Pm m". "OSC 10;? BEL/ST" and "OSC 11;? BEL/ST" are
discarded as well.
- After commit 29431fcb5b, the issue
reported in https://cygwin.com/pipermail/cygwin/2020-May/245057.html
occurs. This is caused by the following mechanism. Cygwin less
called from non-cygwin git is executed under /dev/cons* rather
than /dev/pty* because parent git process only inherits pseudo
console handle. Therefore, less sets ICANON flag for /dev/cons*
rather than original /dev/pty*. When pty is switched to non-cygwin
git process, line_edit() is used in fhandler_pty_master::write()
only to set input_available_event and read ahead buffer is supposed
to be flushed in accept_input(). However, ICANON flag is not set
for /dev/pty*, so accept_input() is not called unless newline
is entered. As a result, the input data remains in the read ahead
buffer. This patch fixes the issue.
Disable -std option since gnu++14 is default anyway, but keep
it available as comment.
Update dynamic exception specifications deprecated with
C++11 to C++11-introduced noexcept expression.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This partially reverts commit
f36262d56a. That commit incorrectly
made the st_mode of a fifo reflect the Windows permissions of the disk
file underlying the fifo.
Rename localtime.c.patched to localtime.patched.c to keep the correct
language suffix.
Create localtime.patched.c in the build dir rather than in the source
dir. Decouple the build rule for creating localtime.patched.c from
the rule to build localtime.o, so we don't have to rebuild the patched
source file all the time.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
That also requires a small tweak to localtime.c.patch, otherwise
GCC complains about the position of the 'trydefrules' label.
Also, simplify includes.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Add tz_posixrules.h with data generated from most recent Cygwin tzdata
package. Establish localtime.cc as primarily a wrapper around a patched
copy of localtime.c. See README for more information.
Modifies winsup/cygwin/Makefile.in to build localtime.o from items in
new winsup/cygwin/tzcode subdirectory. Compiler option "-fpermissive"
is used to accept warnings about missing casts on the return values of
malloc() calls. This patch also removes existing localtime.cc and
tz_posixrules.h from winsup/cygwin as they are superseded by the
subsequent patches in this set.
Both functions are declared as extern "C" functions in
sys/smallprint.h, but as C++ funcs in winsup.h and in the
source itself.
Add extern "C to definitions, remove declarations in winsup.h
and include sys/smallprint.h instead.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- The number of slaves attached to pseudo console is used only for
triggering redraw screen. Counting was not only needless, but also
did not work as expected. This patch removes the code for counting.
This reverts commit 39a9cd9465.
There is no need to explicitly take ownership in fixup_after_exec; if
ownership transfer is needed, it will be taken care of by
fhandler_fifo::close when the parent closes. Moreover, closing the
parent's fifo_reader_thread can cause problems, such as the one
reported here:
https://cygwin.com/pipermail/cygwin-patches/2020q2/010235.html
- After commit 071b8e0cbd, the problem
reported in https://cygwin.com/pipermail/cygwin/2020-May/244873.html
occurs. This is due to freeing console device accidentally rather
than pseudo console. This patch makes sure to call FreeConsole()
only if the process is attached to the pseudo console of the current
pty.
Windows Explorer shows a warning with Cygwin-created DACLs, but putting
the text of the warning into Google doesn't lead to the relevant Cygwin
docs. Let's copy the warning text into the docs in the hopes of helping
confused users. Most of the credit for the wording belongs to Yaakov
Selkowitz.
Latest inquiry: <https://cygwin.com/pipermail/cygwin/2020-May/244814.html>
Signed-off-by: David Macek <david.macek.0@gmail.com>
During a blocking read, we sleep for 1 ms after each iteration through
the connected writers. Currently we do this by calling Sleep (1).
Remove this call to Sleep and instead change the timeout in the
cygwait call from 0 to 1, so that raw_read can be interrupted while
sleeping.
There are currently three functions that call NtQueryInformationFile
to determine the state of a pipe instance. Do this only once, in a
new fifo_client_handler::set_state () function, and call that when
state information is needed.
Remove the fifo_client_handler methods pipe_state and get_state, which
are no longer needed.
Make fhandler_fifo::get_fc_handler return a reference, for use in
select.cc:peek_fifo.
Make other small changes to ensure that this commit doesn't change any
decisions based on the state of a fifo_client_handler.
The tricky part is interpreting FILE_PIPE_CLOSING_STATE, which we
translate to fc_closing. Our current interpretation, which is not
changing as a result of this commit, is that the writer at the other
end of the pipe instance is viewed as still connected from the point
of view of raw_read and determining EOF.
But it is not viewed as still connected if we are deciding whether to
unblock a new reader that is trying to open.
fifo_reader_id_t::operator == and != have been defined without type
accidentally. For some weird reason, only x86 gcc complains about
this problem, not x86_64 gcc.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The beginning of fhandler_fifo.cc contains a long comment giving an
overview of the FIFO implementation. This is now updated to describe
the support for multiple readers.
Although we can have multiple readers open because of dup/fork/exec,
the current code does not support multiple readers opening a FIFO by
explicitly calling 'open'.
The main complication in supporting this is that when a blocking
reader tries to open and there's already one open, it has to check
whether there any writers open. It can't rely on the write_ready
event, whose state hasn't changed since the first writer opened.
To fix this, add two new named events, check_write_ready_evt and
write_ready_ok_evt, and a new method, check_write_ready().
The first event signals the owner's reader thread to call
check_write_ready(), which polls the fc_handler list to check for
connected writers. If it finds none, it checks to see if there's a
writer in the process and then sets/resets write_ready appropriately.
When check_write_ready() finishes it sets write_ready_ok_evt to signal
the reader that write_ready has been updated.
The polling is done via fifo_client_handler::pipe_state(). As long as
it's calling that function anyway, check_write_ready() updates the
state of each handler.
Also add a new lock to prevent a race if two readers are trying to
open simultaneously.
Add a take_ownership method, used by raw_read and select.cc:peek_fifo.
It wakes up all fifo_reader_threads and allows the caller to become
owner. The work is done by the fifo_reader_threads.
For synchronization we introduce several new fhandler_fifo data
members and methods:
- update_needed_evt signals the current owner to stop listening for
writer connections and update its fc_handler list.
- shared_fc_handler() gets and sets the status of the fc_handler
update process.
- get_pending_owner() and set_pending_owner() get and set the reader
that is requesting ownership.
Finally, a new 'reading_lock' prevents two readers from trying to take
ownership simultaneously.
If the owning reader is closing, wait for another reader (if there is
one) to take ownership before closing the owner's pipe handles.
To synchronize the ownership transfer, add events owner_needed_evt and
owner_found_evt, and add methods owner_needed and owner_found to
set/reset them.
Modify the fifo_reader_thread function to wake up all non-owners when
a new owner is needed.
Make a cosmetic change in close so that fhandler_base::close is called
only if we have a write handle. This prevents strace output from
being littered with statements that the null handle is being closed.
If fixup_after_exec is called on a non-close-on-exec reader whose
parent is the owner, transfer ownership to the child. Otherwise the
parent's pipe handles will be closed before any other reader can
duplicate them.
To help with this, make the cancel_evt and thr_sync_evt handles
inheritable, so that the child can terminate the parent's
fifo_reader_thread (and the parent will update the shared fc_handler
list).
Add an optional argument 'from_exec' to update_my_handlers to simplify
its use in this case; no handle duplication is required.
This is in a new shared memory section. We will use it for temporary
storage of the owner's fc_handler list when we need to change owner.
The new owner can then duplicate the pipe handles from that list
before taking ownership.
Add several shared data members and methods that are needed for the
duplication process
Add methods update_my_handlers and update_shared_handlers that carry
out the duplication.
Allow the shared list to grow dynamically, up to a point. Do this by
initially reserving a block of memory (currently 100 pages) and only
committing pages as needed.
Add methods create_shared_fc_handler, reopen_shared_fc_handler, and
remap_shared_fc_handler to create the new shared memory section,
reopen it, and commit new pages. The first is called in open, the
second is called in dup/fork/exec, and the third is called in
update_shared_handlers if more shared memory is needed.
Modify the fifo_reader_thread function to call update_my_handlers when
it finds that there is no owner. Also make it call
update_shared_handlers when the owner's thread terminates, so that the
new owner will have an accurate shared fc_handler list from which to
duplicate.
For convenience, add new methods cleanup_handlers and
close_all_handlers. And add an optional arg to add_client_handler
that allows it to create a new fifo_client_handler without creating a
new pipe instance.
Make fc_handler a pointer to malloc'd memory instead of a fixed-size
array. The size is now a new data member 'shandlers'. Call realloc
in add_client_handler if we need to grow the array.
free fc_handler in close. As long as we're touching that code, also
remove an unneeded lock.
Among all the open readers of a FIFO, one is declared to be the owner.
This is the only reader that listens for client connections, and it is
the only one that has an accurate fc_handler list.
Add shared data and methods for getting and setting the owner, as well
as a lock to prevent more than one reader from accessing these data
simultaneously.
Modify the fifo_reader_thread so that it checks the owner at the
beginning of its loop. If there is no owner, it takes ownership. If
there is an owner but it is a different reader, the thread just waits
to be canceled. Otherwise, it listens for client connections as
before.
Remove the 'first' argument from create_pipe_instance. It is not
needed, and it may be confusing in the future since only the owner
knows whether a pipe instance is the first.
When opening a reader, don't return until the fifo_reader_thread has
time to set an owner.
If the owner closes, indicate that there is no longer an owner.
Clear the child's fc_handler list in dup, and don't bother duplicating
the handles. The child never starts out as owner, so it can't use
those handles.
Do the same thing in fixup_after_fork in the close-on-exec case. In
the non-close-on-exec case, the child inherits an fc_handler list that
it can't use, but we can just leave it alone; the handles will be
closed when the child is closed.
This uniquely identifies an fhandler_fifo open for reading in any
process.
Add a new data member 'me' of this type, which is set in open, dup,
fork, and exec.
Add data and methods to the shared memory that keep track of the
number of open readers.
Increment this number in open, dup, fork, and exec. Decrement it in
close. Reset read_ready if there are no readers left.
Even though we currently allow a FIFO to be opened for reading only
once, we can still have more than one reader open because of dup and
fork. Add a named shared memory section accessible to all readers of
a given FIFO. In future commits we will add information needed by all
readers to this section
Add a class fifo_shmem_t that lets us access this information.
Add a method create_shmem that is called when a reader opens, and add
a method reopen_shmem that is called by dup, fork, and exec. (Each
new reader needs its own view of the shared memory.)
This will simplify future work.
Rename the thread from "listen_client_thread" to "fifo_reader_thread"
because it will be used for more than just listening.
Remove the fixup_before stuff, which won't be needed after future
changes to fixup_after_fork and fixup_after_exec.
- Make read_ready a manual-reset event.
- Signal read_ready in open instead of in the listen_client_thread.
- Don't reset read_ready when the listen_client thread terminates;
instead do it in close().
- Rearrange open and change its error handling.
- Add a wait_open_pipe method that waits for a pipe instance to be
available and then calls open_pipe. Use it when opening a writer if
we can't connect immediately. This can happen if the system is
heavily loaded and/or if many writers are trying to open
simultaneously.
According to Posix, a FIFO open for reading is at EOF if it is empty
and there are no writers open.
The only way to test this is to poll the fifo_client_handlers as in
raw_read and select.cc:peek_fifo. The current hit_eof instead relies
on the value of nconnected, which can be out of date. On the one
hand, it doesn't take into account writers that were connected but
have since closed. On the other hand, it doesn't take into account
writers that are in the process of opening but haven't yet connected.
Fix this by introducing a maybe_eof method that tentatively assumes
EOF if there are no connected writers after polling. Then check for
writers currently opening (via a new 'writer_opening' event), and wait
for the fifo_reader_thread to record any new connection that was made
while we were polling.
To handle the needs of peek_fifo, replace the get_fc_handle method
by a get_fc_handler method, and add a fifo_client_handler::get_state
method.
Remove the is_connected method, which was used only in peek_fifo and
is no longer needed.
Remove the nconnected data member, which was used only for the flawed
hit_eof.
Add some comments about events to fhandler.h.
Always return 0; no one is doing anything with the return value
anyway.
Remove the return value from stop_listen_client.
Make the connection event auto-reset, so that we don't have to reset
it later.
Simplify the process of connecting a bogus client when thread
termination is signaled.
Make some failures fatal.
Remove the unnecessary extra check for thread termination near the end
of listen_client_thread.
Make the values correspond to the possible return values of
fifo_client_handler::pipe_state().
When cleaning up the fc_handler list in listen_client_thread(), don't
delete handlers in the fc_closing state. I think the pipe might still
have input to be read in that case.
Set the state to fc_closing later in the same function if a connection
is made and the status returned by NtFsControlFile is
STATUS_PIPE_CLOSING.
In raw_read, don't error out if NtReadFile returns an unexpected
status; just set the state of that handler to fc_error. One writer in
a bad state doesn't justify giving up on reading.
Replace the 'fhandler_base *' member by a HANDLE to the server side of
the Windows named pipe instance. Make the corresponding
simplifications throughout.
When `cygwin-console-helper.exe` is either missing, or corresponds to a
different Cygwin runtime, we currently wait forever while setting up
access to the pseudo console, even long after the process is gone that
was supposed to signal that it set up access to the pseudo console.
Let's handle that more gracefully: if the process exited without
signaling, we cannot use the pseudo console. In that case, let's just
fall back to not using it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The workaround to access the full disk required since Vista
and described in http://support.microsoft.com/kb/942448
(NOT ACCESSIBLE at the time of writing this commit message)
is required on floppy drives as well.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The cast to generate the return value uses a DWORD variable
as test and set value. The error case is the constant -1.
Given the type of the other half of the conditioal expression,
-1 is cast to DWORD as well.
On 64 bit, this results in the error case returning a 32 bit
-1 value which is equivalent to (ssize_t) 4294967295 rather
than (ssize_t) -1.
Add a fixing cast.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The return type of fhandler write methods is ssize_t. Don't
use an int to store the return value, use ssize_t. Use ptrdiff_t
for the buffer size.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The implicit assumption seemed to be that any subsequent occurence of
the same setting in nsswitch.conf is supposed to rewrite the previous
ones completely. This was not the case if the third or any further
schema was previously defined and the last line defined less than that
(but at least 2), for example:
```
db_home: windows cygwin /myhome/%U
db_home: cygwin desc
```
Let's document this behavior as well.
Signed-off-by: David Macek <david.macek.0@gmail.com>
If the cygdrive prefix is /, then the following happens right now:
$ ln -s /tmp/foo .
$ ls -l foo
lrwxrwxrwx 1 user group 12 Apr 15 23:44 foo -> /mnt/tmp/foo
Fix this by skipping cygdrive prefix conversion to WSL drive
prefix "/mnt", if the cygdrive prefix is just "/". There's no
satisfying way to do the right thing all the time in this case
anyway. For a description and the alternatives, see
https://cygwin.com/pipermail/cygwin-developers/2020-April/011859.html
Also, fix a typo in a comment.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If the first scheme in db_* was invalid, the code would think there
were no schemes specified and replace the second scheme with
NSS_SCHEME_DESC.
Signed-off-by: David Macek <david.macek.0@gmail.com>
PMEM_EXTENDED_PARAMETER is defined in the local winlean.h as long
as mingw-w64 doesn't define it (in winnt.h). ntdll.h needs the
definition for declaring NtMapViewOfSectionEx. cygpath.cc and ps.cc
both include ntdll.h but not winlean.h, so they complain about the
missing definition.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far Cygwin was jumping through hoops to restrict memory
allocation to specific regions. With the advent of VirtualAlloc2
and MapViewOfFile3 (and it's NT counterpart NtMapViewOfSectionEx),
we can skip searching for free space in the specific regions
and just call these functions and let the OS do the job more
efficiently and less racy.
Use VirtualAlloc2 on W10 1803 and later in thread stack allocation.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far Cygwin was jumping through hoops to restrict memory
allocation to specific regions. With the advent of VirtualAlloc2
and MapViewOfFile3 (and it's NT counterpart NtMapViewOfSectionEx),
we can skip searching for free space in the specific regions
and just call these functions and let the OS do the job more
efficiently and less racy.
Use the new functions on W10 1803 and later in mmap.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Windows 10 1803 introduced an extended memory API allowing
to specify memory regions allocations are to be taken off.
In preparation of using this API, define the struct
MEM_EXTENDED_PARAMETER and friends. Declare and allow to
autoload the functions VirtualAlloc2 and NtMapViewOfSectionEx.
Introduce a wincap flag has_extended_mem_api.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Otherwise big stacks have a higher probability to collide with
randomized PEBs and TEBs after fork.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Unfortunately Windows doesn't understand WSL symlinks,
despite being a really easy job. NT functions trying
to access paths traversing WSL symlinks return the status
code STATUS_IO_REPARSE_TAG_NOT_HANDLED. Handle this
status code same as STATUS_OBJECT_PATH_NOT_FOUND in
symlink_info::check to align behaviour to traversing
paths with other non-NTFS type symlinks.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The descriptions of symlink handling are a bit dated, so
revamp them and add the new WSL symlink type.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
WSL symlinks are reparse points containing a POSIX path in UTF-8.
On filesystems supporting reparse points, use this symlink type.
On other filesystems, or in case of error, fall back to the good
old plain SYSTEM file.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 4a36897af3 allowed to convert /mnt/<drive> path
prefixes to Cygwin cygdrive prefixes on the fly. However,
the patch neglected WSL symlinks pointing to the /mnt
directory. Rearrange path conversion so /mnt is converted
to the cygdrive prefix path itself.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Treat WSL symlinks just like other symlinks. Convert
absolute paths pointing to Windows drives via
/mnt/<driveletter> to Windows-style paths <driveletter>:
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This reverts commit 082f2513c7.
Turns out, Linux as well as BSD really only wait for the smaller
number, MIN or # of requested bytes.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Per termios, read waits for MIN chars even if the number of requested
bytes is less. This requires to add WaitCommEvent to wait non-busily
for MIN chars prior to calling ReadFile, so, reintroduce it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Sharing the OVERLAPPED struct and event object in there between
read and select calls in the fhandler might have been a nice
optimization way back when, but it is a dangerous, not thread-safe
approach. Fix this by creating per-fhandler, per-call OVERLAPPED
structs and event objects on demand.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- make sure event object is reset
- set read_ready to true if WaitCommEvent returns success
- improve debugging
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
tcsetattr checks if the VTIME and VMIN values changed and only
calls SetCommTimeouts if so. That's a problem if tcsetattr
is supposed to set VTIME and VIMN to 0, because these are the
start values anyway. But this requires to set ReadIntervalTimeout
to MAXDWORD, which just doesn't happen.
Fix this by dropping the over-optimization of checking the old
values before calling SetCommTimeouts,
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
After changing the type of fhandler_serial::vtime_ to cc_t, vtime_
must be stored in 10s of seconds, not in milliseconds.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Get rid of WaitCommEvent and using overlapped_armed to share the
same overlapped operation between read and select. Rather, make
sure to cancel the overlapped IO before leaving any of these functions.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Datatypes were incorrect, especially vmin_ and vtime_.
Change them to cc_t, as in user space.
- Error checking had a gap or two. Debug output used the
wrong formatting.
- Don't use ev member for ClearCommError and WaitCommEvent.
Both returned values are different (error value vs. event
code). The values are not used elsewhere so it doesn't make
sense to store them in the object. Therefore, drop ev member.
- Some variable names were not very helpful. Especially using
n as lpNumberOfBytesTransferred from GetOverlappedResult and
then actually printing it as if it makes sense was quite
puzzeling.
- Rework the loop and the definition of minchars so that it
still makes sense when looping.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Don't use ev member for ClearCommError and WaitCommEvent.
Both returned values are different (error value vs. event
code). The values are not used elsewhere so it doesn't make
sense to store them in the object.
- Drop local variable ready which is used inconsequentially.
- Since WFSO already waits 10 ms, don't wait again if no char
is in the inbound queue.
- Avoid else if chains.
- Only print one line of debug output on error.
- Drop overlapped_armed < 0 check. This value is only set in
fhandler_serial::raw_read if VTIME > 0, and even then it's only
set to be immediately reset to 0 before calling ReadFile. So
overlapped_armed is never actually < 0 when calling select.
- Fix a screwed up statement order.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Passing a pointer to a local variable to WriteConsoleA is
not actually needed if we're not going to do anything with
what WriteConsoleA would put in there.
For the wpbuf class the pointer argument was made optional,
so it can be just left out; other call places now pass a
NULL pointer instead. The local variables `wn' and `n'
are no unused, so they go away.
Replace direct access to a pair of co-dependent variables
by calls to methods of a class that encapsulates their relation.
Also replace C #define by C++ class constant.
- In xterm compatible mode, "ESC 7" and "ESC 8" do not work properly
in the senario:
1) Execute /bin/ls /bin to fill screen.
2) Sned CSI?1049h to alternate screen.
3) Reduce window size.
4) Send CSI?1049l to resume screen.
5) Send "ESC 7" and "ESC 8".
After sending "ESC 8", the cursor goes to incorrect position. This
patch adds a workaround for this issue.
- This patch fixes the issue that xterm compatible mode for input
is not correctly set/unset in some situation such as:
1) cat is stopped by ctrl-c.
2) The window size is changed in less.
In case 1), request_xterm_mode_input(true) is called in read(),
however, cat is stopped without request_xterm_mode_input(false).
In case 2), less uses longjmp in signal handler, therefore,
corresponding request_xterm_mode_input(false) is not called if
the SIGWINCH signal is sent within read(). With this patch,
InterlockedExchange() is used instead of InterlockedIncrement/
Decrement().
So far ioctl(TIOCINQ) could end up returning -1 with errno set to EINVAL
if a non-zero device error mask has been returned by ClearCommError.
This doesn't reflect Linux behaviour, which always returns the number of
chars in the inbound queue, independent of any I/O error condition.
EINVAL was a pretty weird error code to use in this scenario, too.
Fix this by dropping all checking for device errors in the TIOCINQ
case. Just return the number of chars in the inbound queue.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- This patch makes some detailed behaviour of ESC sequences such as
"CSI Ps L" (IL), "CSI Ps M" (DL) and "ESC M" (RI) in xterm mode
match with real xterm.
fhandler_socket_unix::fixup_after_exec incorrectly calls
fhandler_socket_unix::fixup_after_fork with a NULL parent process
handle. Not only that calling DuplicateHandle with a NULL parent
handle fails, but it's utterly wrong trying to duplicate the handles
at all here.
Rather just set some important values to NULL and reopen the shared
memory region. Create a fixup_helper method to call common code from
fixup_after_fork and fixup_after_exec.
Add comments to other invocations of fixup_after_fork with NULL
handle to mark them as correct this way.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Aligning the stack pointer using an asm statement isn't any longer
supported. gcc-9.2.0 generates the following warning:
init.cc:33:46: error: listing the stack pointer register '%esp'
in a clobber list is deprecated [-Werror=deprecated]
[...]
init.cc:33:46: note: the value of the stack pointer after an
'asm' statement must be the same as it was before the statement
Replace the asm expression with the gcc function attribute
`force_align_arg_pointer'. This aligns the stack exactly as
required.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
reopen_shmem is accidentally called on the parent fhandler
rather than the child fhandler, and it's called too early.
Make sure to call it on the child and only after its shmem_handle
is valid.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Update dumper for bfd API changes in binutils 2.34
libbfd doesn't guarantee API stability, so we've just been lucky this
hasn't broken more often.
See binutils commit fd361982.
- In Win10 upto 1809, xterm compatible mode does not have REP
escape sequence which terminfo declares. This patch adds support
for "CSI Ps b" (REP). With this patch, bvi (binary editor) works
normally in Win10 1809. Also, xterm compatible mode does not have
"CSI Pm `" (HPA), "CSI Pm a" (HPR) and "CSI Ps e" (VPR). However,
they do not appear to be declared by terminfo. Therefore, these
have been pending.
- Cygwin console with xterm compatible mode causes problem reported
in https://www.cygwin.com/ml/cygwin-patches/2020-q1/msg00212.html
if background/foreground colors are set to gray/black respectively
in Win10 1903/1909. This is caused by "CSI Ps L" (IL), "CSI Ps M"
(DL) and "ESC M" (RI) control sequences which are broken. This
patch adds a workaround for the issue.
The helper function ttynam creates a tty name by using sprintf wrongly
on a pretty short buffer. The foramt string only specifies a minimum
field length, not a maximum field length, so gcc-9.2.0 complains:
ps.cc:101:23: warning: 'sprintf' may write a terminating nul past the
end of the destination [-Wformat-overflow=]
Fix this thoroughly by specifying a maximum field width as well as by
using snprintf with a fixed buffer length. Also, drop using a static
buffer in favor of using a buffer in the caller.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
...from structs used for data exchange between clients and cygserver.
All of the structs have the same size and member offsets, packed or
unpacked. Keeping the packed attribute results in ominous warnings
from gcc-9.2.0:
cygserver.cc:259:10: warning: taking address of packed member of
'client_request_attach_tty::request_attach_tty' may result in an
unaligned pointer value [-Waddress-of-packed-member]
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
gcc-9.2.0 has an execve builtin which uses the nothrow attribute.
This results in an error when aliasing execve to _execve for newlib:
exec.cc:88:23: error: 'int _execve(const char*, char* const*, char*
const*)' specifies less restrictive attribute than its target
'int execve(const char*, char* const*, char* const*)': 'nothrow'
[-Werror=missing-attributes]
88 | EXPORT_ALIAS (execve, _execve) /* For newlib */
Add the -fno-builtin-execve CFLAGS when building exec.o to override
the gcc builtin.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The variable returning the overrun count from the tracker object after
disarming the overrun counter was not correctly initialized. For some
reason this has only been noticed by gcc-9.2.0, not by the formerly used
gcc-7.4.0.
This problem should not have had any runtime impact. The method
timer_tracker::disarm_overrun_event is supposed to be called in
lock-step with timer_tracker::arm_overrun_event, which in turn
results in the variable getting a valid value.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
linux 4.6 x86/cpu: Add advanced power management bits
Bit 11 of CPUID 8000_0007 edx is processor feedback interface.
Bit 12 of CPUID 8000_0007 edx is accumulated power.
Print proper names in /proc/cpuinfo
[missed enabling this 2016 change during previous major cpuinfo update
as no power related changes were made to the Linux files since then]
- Accessing shared_console_info before initialization causes access
violation because it is a NULL pointer. The cause of the problem
reported in https://cygwin.com/ml/cygwin/2020-02/msg00197.html is
this NULL pointer access in request_xterm_mode_output() when it is
called from close(). This patch makes sure that shared_console_info
is not NULL before calling request_xterm_mode_output().
Added in Linux 5.6:
Check FSRM and use REP MOVSB for short copies on systems that have it.
>From the Intel Optimization Reference Manual:
3.7.6.1 Fast Short REP MOVSB
Beginning with processors based on Ice Lake Client microarchitecture,
REP MOVSB performance is enhanced with string lengths up to 128 bytes.
Support for fast-short REP MOVSB is indicated by the CPUID feature flag:
CPUID [EAX=7H, ECX=0H).EDX.FAST_SHORT_REP_MOVSB[bit 4] = 1.
There is no change in the REP STOS performance.
A NUL byte in the output stream got accidentally not handled as IGN char
in xterm console mode. The internal mbtowc conversion doesn't handle
embedded NUL values gracefully, it always stops converting at NUL bytes.
This broke the output of strings with embedded NUL bytes.
Fix this by always skipping IGN chars in the "normal char output loop"
and make sure not to move the cursor one position to the right, as in
legacy console mode.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
NSIG is a deprecated symbol only visible under MISC visibility.
_NSIG is used widely instead, and on most systems NSIG is
defined in terms of _NSIG.
Follow suit: Change NSIG to _NSIG throughout and change visiblity
of NSIG to be defined only in __MISC_VISIBLE case.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- If two cygwin programs are executed simultaneousley with pipes
in cmd.exe, xterm compatible mode is accidentally disabled by
the process which ends first. After that, escape sequences are
not handled correctly in the other app. This is the problem 2
reported in https://cygwin.com/ml/cygwin/2020-02/msg00116.html.
This patch fixes the issue. This patch also fixes the problem 3.
For these issues, the timing of setting and unsetting xterm
compatible mode is changed. For read, xterm compatible mode is
enabled only within read() or select() functions. For write, it
is enabled every time write() is called, and restored on close().
- In push_to_pcon_screenbuffer(), open() and ioctl() are called.
Since push_to_pcon_screenbuffer() is called in read() and write(),
errno which is set in read() and write() code may be overwritten
in open() or ioctl() call. This patch prevent this situation.
- PTY has a bug reported in:
https://cygwin.com/ml/cygwin/2020-02/msg00067.html.
This is the result of state mismatch between real pseudo console
attaching state and state variable. This patch fixes the issue.
- PTY has a problem that the key input, which is typed during
windows native app is running, disappear when it returns to shell.
(Problem 3 in https://cygwin.com/ml/cygwin/2020-02/msg00007.html)
This is beacuse pty has two input pipes, one is for cygwin apps
and the other one is for native windows apps. The key input during
windows native program is running is sent to the second input pipe
while cygwin shell reads input from the first input pipe.
This patch realize transfering input data between these two pipes.
- Debug codes used in the early stage of pseudo console support are
removed. (Regarding ALWAYS_USE_PCON and USE_API_HOOK) Along with
this, the codes related to this change are organized.
- PTY code has a problem that tcsh is terminated if the following
command is executed.
true; chcp &
This seems to be caused by invalid pointer access which occurs
when the process exits during the kill() code is execuetd. This
patch avoids the issue by not using kill().
- With this patch, foreground color and background color are allowed
to be set simultaneously by 24 bit color escape sequence such as
ESC[38;2;0;0;255;48;2;128;128;0m in legacy console mode.
When fhandler_base::fstat_helper is called, the handle h returned by
get_stat_handle() should be pc.handle() and should be safe to use for
getting the file information. Previously, the call to
get_file_attribute() for FIFOs set the first argument to NULL instead
of h, thereby forcing the file to be opened for fetching the security
descriptor in get_file_sd().
Make fhandler_socket_local::dup and fhandler_socket_local::fcntl (a
new method) call fhandler_base::dup and fhandler_base::fcntl if O_PATH
is set.
We're viewing the socket as a disk file here, but there's no need to
implement the actions of fhandler_disk_file::dup and
fhandler_disk_file::fcntl, which do nothing useful in this case beyond
what the fhandler_base methods do. (The extra actions are only useful
when I/O is going to be done on the file.)
If O_PATH is set, then the fhandler_socket_local object has a handle
that can be used for getting the statvfs information. Use it by
calling fhandler_base::fstatvfs_by_handle. Without this change,
fhandler_disk_file::fstatfvs would be called on a new fhandler_disk
object, which would then have to be opened.
If an AF_LOCAL socket is opened with O_PATH, all socket system calls
that take a file descriptor argument fail on the resulting descriptor.
Make sure that errno is set as on Linux for those calls that are
implemented on Linux. In almost all cases it is ENOTSOCK. There are
two exceptions:
- sockatatmark(3); errno is EBADF.
- bindresvport(3); errno is EAFNOSUPPORT if the second argument sin
(of type struct sockaddr_in *) is non-NULL and satisfies
sin->sin_family == AF_INET.
Finally, there are two BSD socket system calls implemented on Cygwin
but not Linux: getpeereid(3) and bindresvport_sa(3). Set errno to
ENOTSOCK for these for consistency with the majority of the other
calls.
If that flag is not set, or if an attempt is made to open a different
type of socket, the errno is now EOPNOTSUPP instead of ENXIO. This is
consistent with POSIX, starting with the 2016 edition. Earlier
editions were silent on this issue.
Opening is done in a (new) fhandler_socket_local::open method by
calling fhandler_base::open_fs.
Also add a corresponding fhandler_socket_local::close method.
This edits licenses held by Berkeley and NetBSD, both of which
have removed the advertising requirement from their licenses.
Signed-off-by: Keith Packard <keithp@keithp.com>
This option has been disabled long ago and nobody missed it.
Removing drops a bit of unneeded code
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If O_PATH is set, then the fhandler_fifo object has a handle that can
be used for getting the statvfs information. Use it by calling
fhandler_base::fstatvfs_by_handle. Before this change,
fhandler_disk_file::fstatfvs was called on a new fhandler_disk_file
object, which would then have to be opened.
Define a new method fhandler_base::fstatvfs_by_handle, extracted from
fhandler_disk_file::fstatvfs, which gets the statvfs information when
a handle is available.
This will be used in future commits for special files that have been
opened with O_PATH.
Treat a special file opened with O_PATH the same as a regular file,
i.e., use its handle to get the stat information.
Before this change, fstat_fs opened the file a second time, with the
wrong flags and without closing the existing handle. A side effect
was to change the openflags of the file, possibly causing further
system calls to fail.
Currently this change only affects FIFOs, but it will affect
AF_LOCAL/AF_UNIX sockets too once they support O_PATH.
mknod32 actually creates a path_conv, just to call mknod_worker
with a win32 path. This doesn't only require to create path_conv
twice, it also breaks permissions on filesystems supporting ACLs.
Fix this by passing the path_conv created in the caller down to
symlink_worker. Also, while at it, simplify the handling of trailing
slashes and move it out of symlink_worker. Especially use the
new PC_SYM_NOFOLLOW_DIR flag to avoid fiddeling with creating
a new path copy without the trailing slash.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Usually a trailing slash requires to follow an existing symlink,
even with PC_SYM_NOFOLLOW. The reason is that "foo/" is equivalent
to "foo/." so the symlink is in fact not the last path component,
"." is. This is default for almost all scenarios.
PC_SYM_NOFOLLOW_DIR now allows the caller to request not to
follow the symlink even if a trailing slash is given. This can
be used in callers to perform certain functions Linux-compatible.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- After commit 6cc299f0e2, outputs of
cygwin programs which call both printf() and WriteConsole() are
frequently distorted. This patch fixes the issue.
- The cause of the problem reported in
https://www.cygwin.com/ml/cygwin/2020-01/msg00220.html is that the
chars input before dup() cannot be read from the new file descriptor.
This is because the readahead buffer (rabuf) in the console is newly
created by dup(), and does not inherit from the parent. This patch
fixes the issue.
If the O_PATH flag is set, fhandler_fifo::open now simply calls
fhandler_base::open_fs.
The previous attempt to handle O_PATH in commit aa55d22c, "Cygwin:
honor the O_PATH flag when opening a FIFO", fixed a hang but otherwise
didn't do anything useful.
If O_PATH is set in the flags argument of
fhandler_base::device_access_denied, return false. No
read/write/execute access should be required in this case.
Previously, the call to device_access_denied in open(2) would lead to
an attempt to open the file with read access even if the O_PATH flag
was set.
rdpru flag is cpuid xfn 80000008 ebx bit 4 added in linux 5.5;
see AMD64 Architecture Programmer's Manual Volume 3:
General-Purpose and System Instructions
https://www.amd.com/system/files/TechDocs/24594.pdf#page=329
and elsewhere in that document
- For programs which does not work properly with pseudo console,
disable_pcon in environment CYGWIN is introduced. If disable_pcon
is set, pseudo console support is disabled.
- For programs compiled with -mwindows option, reopening slave is
needed in push_to_pcon_screenbuffer(), however, it was not at
appropriate place. This causes the problem reported in
https://www.cygwin.com/ml/cygwin/2020-01/msg00161.html. This
patch fixes the issue.
- Though this rarely happens, sometimes the first printing of non-
cygwin process does not displayed correctly. To fix this issue,
the code for waiting for forwarding by master_fwd_thread is revised.
Following Linux, allow the pathname argument to be an empty string if
the AT_EMPTY_PATH flag is specified. In this case the dirfd argument
can refer to any type of file, not just a directory, and the call
operates on that file. In particular, dirfd can refer to a symlink
that was opened with O_PATH | O_NOFOLLOW.
Following Linux, allow the pathname argument to be an empty string,
provided the dirfd argument refers to a symlink opened with
O_PATH | O_NOFOLLOW. The readlinkat call then operates on that
symlink.
Commit 283cb372, "Cygwin: normalize_win32_path: improve error
checking", required a prefix '\\?\' or '\??\' in the source path to be
followed by 'UNC\' or 'X:\', where X is a drive letter. That was too
restrictive, since it disallowed the paths '\\?\X: and '\??\X:'. This
caused problems when a user tried to use the root of a drive as the
Cygwin installation root, as reported here:
https://cygwin.com/ml/cygwin/2020-01/msg00111.html
Modify the requirement so that '\??\X:' and '\\?\X:' are now allowed
as source paths, without a trailing backslash.
- In octave gui, sometimes state mismatch between real pty state
and state variable occurs. For example, this occurs when 'ls'
command is executed in octave gui. This patch fixes the issue.
- After commit e1a0775dc0, the problem
reported in https://www.cygwin.com/ml/cygwin/2020-01/msg00093.html
occurs. For Gnu scren and tmux, calling FreeConsole() on pty close
is necessary. However, if FreeConsole() is called, cygwin setup
with '-h' option does not work. Therefore, the commit
e1a0775dc0 delayed closing pty.
This is the cause of the problem above. Now, instead of delaying
pty close, FreeConsole() is not called if the process is non cygwin
processes such as cygwin setup.
- The console with 24bit color support has a problem that console
mode is changed if cygwin process is executed in cmd.exe which
started in cygwin shell. For example, cursor keys become not
working if bash -> cmd -> true are executed in this order.
This patch fixes the issue.
- In Win10 1809, the cursor position sometimes goes out of screen
by clear command in console. This seems to be caused by escape
sequence CSI3J (ESC[3J). This happens only for 1809. This patch
is a workaround for the issue.
- Special function keys such as arrow keys or function keys do not
work in ConEmu with cygwin-connector after commit
6a06c6bc8f. This patch fixes the
issue.
- PTY code which support pseudo console has a problem that causes
handle leaks. Four of these are bug in pty code, and the other
one seems to be a bug of Windows10. ClosePseudoConsole() fails
to close one internal handle. This patch fixes the issue.
- If two PTYs are opened in the same process and the first one
is closed, the helper process for the first PTY remains running.
This patch fixes the issue.
- The slowing down issue of X11 forwarding using ssh -Y, reported
in https://www.cygwin.com/ml/cygwin/2019-12/msg00295.html,
is due to the change of select() code for pty in the commit
915fcd0ae8. cygthread::detach()
takes at most about 10msec because Sleep() is used in the thread.
For this issue, this patch uses cygwait() instead of Sleep() and
introduces an event to abort the wait. For not only pty, but pipe
and fifo also have the same problem potentially, so this patch
applies same strategy to them as well.
Though our implementation of cpu sets doesn't need it, software from
Linux environments expects this definition to be present. It's
documented on the Linux CPU_SET(3) man page but was left out due to
oversight.
Addresses https://cygwin.com/ml/cygwin/2019-12/msg00248.html
Add that flag to the pipe type argument when creating the Windows
named pipe. And add a definition of that flag to ntdll.h (copied from
/usr/include/w32api/ddk/ntifs.h).
- Even with commit fe512b2b12, pty
still has a problem in ESC[?3h and ESC[?3l handling if invalid
sequence such as ESC[?$ is sent. This patch fixes the issue.
Both functions were introduce with Windows 7 only, so we need to
autoload them for the sake of Vista/2008.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
On certain error conditions there is a code snippet that checks
whether the last component of the path has a trailing dot or space or
a leading space. Skip this check if the last component is empty,
i.e., if the path ends with a backslash. This avoids an assertion
failure if the trailing backslash is the only backslash in the path,
as is the case for a DOS drive 'X:\'.
Addresses: https://cygwin.com/ml/cygwin/2019-12/msg00016.html
- Pseudo console clears console screen buffer if ESC[?3h or ESC[?3l
is sent. However, xterm/vt100 does not clear screen. This cause
mismatch between real screen and console screen buffer. Therefore,
this patch triggers redraw screen in that situation so that the
synchronization is done on the next execution of native app.
This solves the problem reported in:
https://www.cygwin.com/ml/cygwin-patches/2019-q4/msg00116.html
- Previously, pty cleared screen at startup for synchronization
between the real screen and console screen buffer for pseudo
console. With this patch, instead of clearing screen, the screen
is redrawn when the first native program is executed after pty
is created. In other words, synchronization is deferred until
the native app is executed. Moreover, this realizes excluding
$TERM dependent code.
fhandler_console::create_invisible_console_workaround() does not use the
lpApplicationName parameter and neglects to quote its command name on
lpCommandLine in the call to CreateProcessW.
Given CreateProcessW's brain-dead method to evaluate the application
path given on the command line, this opens up a security problem if
Cygwin is installed into a path with spaces in it.
Fix this by using the lpApplicationName parameter and quoting of the
application path in the lpCommandLine parameter (used as argv[0] in
the called console helper.
For extended paranoia, make the argument string array big enough to
fit full 64 bit pointer values into it. Handles usually only use
the lower 32 bit, but better safe than sorry.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
FH_CONS_MAX should refelect the fact that we allow 128 consoles, even if
it's unused.
Suggested-by: Achim Gratz <Stromeko@nexgo.de>
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 5a0f2c00aa "Cygwin: fork/exec: fix child process permissions"
removed the PROCESS_DUP_HANDLE handle permission of the parent process
handle in the child to avoid a security problem.
It turned out that this broke the following scenario: If a process forks
and then the parent execs, the child loses the ability to register the
parent's death. To wit, after the parent died the child process does
not set its own PPID to 1 anymore.
The current exec mechanism copies required handle values (handles to
keep contact to the child processes) into the child_info for the
about-to-be-exec'ed process. The exec'ed process is supposed to
duplicate these handles. This fails, given that we don't allow the
exec'ed process PROCESS_DUP_HANDLE access to the exec'ing process since
commit 5a0f2c00aa.
The fix is to avoid the DuplicateHandle calls in the exec'ed process.
This patch sets the affected handles to "inheritable" in the exec'ing
process at exec time. The exec'ed process just copies the handle values
and resets handle inheritance to "non-inheritable". The exec'ing
process doesn't have to reset handle inheritance, it exits after setting
up the exec'ed process anyway.
Testcase: $ ssh-agent /bin/sleep 3
ssh-agent forks and the parent exec's sleep. After sleep exits, `ps'
should show ssh-agent to have PPID 1, and eventually ssh-agent exits.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Call find_exec with the FE_NNF flag to enforce a NULL return when the
executable isn't found in $PATH. Convert NULL to "". This aligns
spawnvp and spawnvpe with execvp and execvpe.
If the directory name has the form 'x:' followed by one or more
slashes or backslashes, and if there's at least one backslash, assume
that the user is referring to 'x:\', the root directory of drive x,
and don't strip the backslash.
Previously all trailing slashes and backslashes were stripped, and the
name was treated as a relative file name containing a literal colon.
Addresses https://cygwin.com/ml/cygwin/2019-08/msg00334.html.
Add feature test print macro that makes feature, bit, and flag text
comparison and checking easier. Handle as common former Intel only
feature flags also supported on AMD. Change order and some flag names
to agree with current Linux.
If the source path starts with the Win32 long path prefix '\\?\' or
the NT object directory prefix '\??\', require the prefix to be
followed by 'UNC\' or '<drive letter>:\'. Otherwise return EINVAL.
This fixes the assertion failure in symlink_info::check that was
reported here:
https://cygwin.com/ml/cygwin/2019-09/msg00228.html
That assertion failure was caused by normalize_win32_path returning a
path with no backslashes when the source path was '\\?\DRIVE'.
If the last component of the directory name is a symlink followed by a
slash, rmdir now fails, following Linux but not POSIX, even if the
symlink resolves to an existing empty directory.
mkdir was similarly changed in 2009 in commit
52dba6a5c4. Modify a comment to clarify
the purpose of that commit.
Addresses https://cygwin.com/ml/cygwin/2019-09/msg00221.html.
Prior to commit b0717aae, path_conv::check had the following code:
if (strncmp (path, "\\\\.\\", 4))
{
/* Windows ignores trailing dots and spaces in the last path
component, and ignores exactly one trailing dot in inner
path components. */
char *tail = NULL;
[...]
if (!tail || tail == path)
/* nothing */;
else if (tail[-1] != '\\')
{
*tail = '\0';
[...]
}
Commit b0717aae0 intended to disable this code, but it inadvertently
disabled only part of it. In particular, the declaration of the local
tail variable was in the disabled code, but the following remained:
if (!tail || tail == path)
/* nothing */;
else if (tail[-1] != '\\')
{
*tail = '\0';
[...]
}
[A later commit removed the disabled code.]
The tail variable here points into a string different from path,
causing that string to be truncated under some circumstances. See
https://cygwin.com/ml/cygwin/2019-09/msg00001.html
for more details.
This commit fixes the problem by removing the leftover code
that was intended to be removed in b0717aae.
- The autoload feature is used rather than GetModuleHandle(),
GetProcAddress() for CreatePseudoConsole(), ResizePseudoConsole()
and ClosePseudoConsole().
- Since calling system __loadlocale() caused execution error,
PTY used its own NLS function. The cause of the error has been
found, the corresponding code has been rewritten using system
function.
The CPU_SET macros defined in Cygwin's include/sys/cpuset.h must not
be visible in an application's namespace unless _GNU_SOURCE has been
#defined. Internally this means wrapping them in #if __GNU_VISIBLE.
- In non-canonical mode, cygwin console returned only one character
even if several keys are typed before read() called. This patch
fixes this behaviour.
- Previously, input and output pipes were switched together between
the traditional pty and the pseudo console. However, for example,
if stdin is redirected to another device, it is better to leave
input pipe traditional pty side even for non-cygwin program. This
patch realizes such behaviour.
- If screen alternated while pseudo console switching, it sometimes
failed. This might happen when the output of the non-cygwin program
is piped to less. This patch fixes this issue.
- When the I/O pipe is switched to the pseudo console side, the
behaviour of Ctrl-C was unstable. This rarely happens, however,
for example, shell sometimes crashes by Ctrl-C in that situation.
Furthermore, Ctrl-C was ignored if output of non-cygwin program
is redirected to pipe. This patch fixes these issues.
- Forcibly attach to pseudo console in advance so that the error
messages by system_printf() are displayed to screen reliably.
This is needed when stdout is redirected to another pty. In this
case, process has two ptys opened. However, process can attach
to only one console. So it is necessary to change console attached.
- PTY with pseudo console support sitll has problem which potentially
cause state mismatch between state variable and real console state.
This patch fixes this issue.
- select() did not work correctly when both read and except are
polled simultaneously for the same fd and the r/w pipe is switched
to pseudo console side. This patch fixes this isseu.
- Pseudo console support introduced by commit
169d65a577 shows garbage ^[[H^[[J in
some of emacs screens. These screens do not handle ANSI escape
sequences. Therefore, clear screen is disabled on these screens.
- Pseudo console support introduced by commit
169d65a577 sometimes cause random
crash or freeze by pressing ^C while cygwin and non-cygwin
processes are executed simultaneously in the same pty. This
patch is a workaround for this issue.
- API hook used for pseudo console support causes slow down.
This patch limits API hook to only program which is linked
with the corresponding APIs. Normal cygwin program is not
linked with such APIs (such as WriteFile, etc...) directly,
therefore, no slow down occurs. However, console access by
cygwin.dll itself cannot switch the r/w pipe to pseudo console
side. Therefore, the code to switch it forcely to pseudo
console side is added to smallprint.cc and strace.cc.
- Pseudo console support introduced by commit
169d65a577 has some bugs which
cause mismatch between state variables and real pseudo console
state regarding console attaching and r/w pipe switching. This
patch fixes this issue by redesigning the state management.
- PTY uses Win32 API hook for pseudo console suppot. The function
hook_api() is used for this purpose and defined in fhandler_tty.cc
previously. This patch moves it into hookapi.cc.
- Support pseudo console in PTY. Pseudo console is a new feature
in Windows 10 1809, which provides console APIs on virtual
terminal. With this patch, native console applications can work
in PTYs such as mintty, ssh, gnu screen or tmux.
Rather than waiting for signalfd_select_wait in a thread, which is racy,
create a global event "my_pendingsigs_evt" which is set and reset by
wait_sig depending only on the fact if blocked signals are pending or not.
This in turn allows to WFMO on this event in select as soon as signalfds
are present in the read descriptor set. Select's peek and verify
will then check if one of the present signalfds is affected.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen
Jon Turney
Christian Franke
Jeremy Drake
Brian Inglis
Ken Brown
Takashi Yano
Johannes Schindelin
Takashi Yano via Cygwin-patches
Mark Geisert
Marek Smetana
Ben Wijen
Christian Franke
Corinna Vinschen
Torbjörn SVENSSON via Newlib
Martin Storsjö
Liu Hao
Marc Hoersken
David Allsopp
Biswapriyo Nath
Åke Rehnman
Hans-Bernhard Broeker
Thomas Wolff
Keith Packard
Arseniy Lartsev
Achim Gratz