It is used only once, and the name is supposed to suggest "device that
is not based on the filesystem". This intended meaning is clearer if
we just replace is_auto_device() by its definition at the place where
it's used.
The sigpending mechanism failed to check if the pending signal was a
process-wide signal, or a signal for the curent thread. Fix that by
adding a matching conditional to wait_sig's __SIGPENDING code.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far sig_send's return type is int. The problem with this is
that sig_send returns a sigset_t on __SIGPENDING, and sigset_t
is defined as long type. So the function only returns the lower
32 bit of sigset_t, which is fine on 32 bit, but casts away the
pending RT signals on 64 bit.
Fix this by changing the return type of sig_send to sigset_t, so
as not to narrow down the sigset when returning from handling
__SIGPENDING. Make sure to cast correctly in all invocations
of sig_send.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
2019-07-09 Joern Rennecke <joern.rennecke@riscy-ip.com>
* libm/common/s_expm1.c ("math_config.h"): Include.
(expm1): Use __math_oflow to set errno.
* libm/common/s_log1p.c ("math_config.h"): Include.
(log1p): Use __math_divzero and __math_invalid to set errno.
* libm/common/sf_expm1.c ("math_config.h"): Include.
(expm1f): Use __math_oflow to set errno.
* libm/common/sf_log1p.c ("math_config.h"): Include.
(log1pf): Use __math_divzero and __math_invalid to set errno.
Have sched_getaffinity() interface like glibc's, and provide an
undocumented internal interface __sched_getaffinity_sys() like the Linux
kernel's sched_getaffinity() for benefit of taskset(1).
Update the offsets used to save registers into the stejmp jmp_buf
structure in order to:
* Avoid writing the supervision register outside the buffer and thus
clobbering something on the stack. Previously the supervision register
was written at offset 124 while the buffer was of length 124.
* Shrink the jmp_buf down to the size actually needed, by avoiding holes
at the locations of omitted registers.
Invert equality check instruction to correct the return value handling
in longjmp.
The return value should be the value of the second argument to longjmp,
unless the argument value was 0 in which case it should be 1.
Previously, longjmp would set return value 1 if the second argument was
non-zero, and 0 if it was 0, which was incorrect.
Add a function timerfd_tracker::enter_critical_section_cancelable,
which is like enter_critical_section but honors a cancel event. Call
this when a timer expires while the timerfd thread is in its inner
loop. This avoids a deadlock if timerfd_tracker::dtor has entered its
critical section and is trying to cancel the thread. See
https://cygwin.com/ml/cygwin/2019-06/msg00096.html.
GCC r272640 modifies the MSP430 target to use "__int20__" for
PTRDIFF_TYPE (and therefore INTPTR_TYPE) instead of "__int20".
To support the calculation of pointer size in
newlib/libc/include/sys/_intsup.h, definitions for __int20__ need to be
added.
This patch set implements the Linux syscalls sched_getaffinity,
sched_setaffinity, pthread_getaffinity_np, and pthread_setaffinity_np.
Linux has a straightforward view of the cpu sets used in affinity masks.
They are simply long (1024-bit) bit masks. This code emulates that view
while internally dealing with Windows' distribution of available CPUs among
processor groups.
Make it a manual reset event. It's only used once to allow a reader
to open, and there's no reason to ever reset it. Defensively set it
when a client connection is recorded, even though it should be set by
the writer that connected.
Call NtReadFile directly instead of calling fhandler_base::raw_read.
In addition to being simpler, this gives us access to the return value
from NtReadFile.
Add a method fifo_client_handler::pipe_state that queries Windows for
the state of a pipe instance. Use this to help terminate the
listen_client thread cleanly.
If the last client handler is useless, delete it instead of declaring
it invalid.
fhandler_fifo::close could be called from a signal handler or another
thread at a time when another function is holding the fifo_client
lock. This could prevent the listen_client thread from acting on the
thread termination event. Avoid a deadlock by calling
fifo_client_unlock at the beginning of fhandler_fifo::close.
libX11 provides <X11/Xlocale.h>. The build of libX11 itself adds
include/X11 to the compiler's include path. This results in a name
collision with /usr/include/xlocale.h on case-insensitive filesystems.
Commit 90e35b1eb3 renamed sys/_locale.h to xlocale.h in March 2017 under
the assumption that we should provide the locale_t type in the same file
as on Linux, FreeBSD, and Darwin.
A few weeks later (June 2017), glibc removed the xlocale.h file in favor
of bits/types/locale_t.h, which shouldn't be included directly anyway.
For reference and the reasoning, see
https://sourceware.org/git/?p=glibc.git;a=commit;h=f0be25b6336d
Given the above, revert 90e35b1eb3 and
fix additional usage of xlocale.h.
From: Andrew Stubbs <ams@codesourcery.com>
Fix a bug in which the high-part of 64-bit values are being corrupted, leading
to erroneous stack overflow errors. The problem was only that the mixed-size
calculations are being treated as signed when they should be unsigned.
From: Kwok Cheung Yeung <kcy@codesourcery.com>
This patch adds enough support for constructors/destructors and OS functions
to be able to link and run gfortran programs on AMD GCN.
There's no actual ability to do I/O operations on this targets, besides
"write" to stdout and stderr, so most of the functions are just stubs.
prevents compiler warning when they end up being unused.
Reviewed by: kib
Obtained from: OpenBSD
MFC after: 2 weeks
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D20185
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
32 bit Cygwin performs a POSIX-compatible mapping after EOF which
is not supported in this form on Windows. The 64 bit Windows
kernel never supported the AT_ROUND_TO_PAGE mapping flag, so we
couldn't page-aligned map the space right after the file's EOF.
So mapping beyond EOF was disabled in 64 bit Windows and WOW64.
However, if mmap works, a matching munmap should work as well,
*and* it should not accidentally unmap unrelated memory.
Therefore we enable mapping beyond EOF on 64 bit as well. Since
that mapping is always 64K aligned, the are between the last file
page and the next 64K allocation boundary will be unallocated.
There's no way around that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When using NtCreateFile when creating a directory that already exists,
it will correctly return 'STATUS_OBJECT_NAME_COLLISION'.
However using this function to create a directory (and all its parents)
a normal use would be to start with mkdir(‘/cygdrive/c’) which translates
to ‘C:\’ for which it'll instead return ‘STATUS_ACCESS_DENIED’.
An increasing number of tools are being included in Windows which have the
same names as those included in Cygwin packages. Indicating which one is
first in PATH can be helpful in diagnosing behavioural discrepencies
between them.
Also, fix the alphabetization of ssh.
64 bit Windows started out with a 44 bit address space due to a
restriction of the AMD64 CPUs at the time. Starting with Windows
8.1, these CPUs are not supported anymore and Windows switched to
the full 48 bit address space supported by AMD64.
Cygwin didn't follow suit yet so mmaps are still restricted to
the lower 44 bit address space. Fix that by using a system-specific
upper address for mmap allocations, 44 bit up to Windows 8, 48 bit
starting with Windows 8.1.
While at it, move the heap by another 8 Gigs to leave some space
for a potential extension of DLL address space, and restrict the
mmap lower address so the heap can grow to 32 Gigs before colliding
with mmaps.
Do not remember the child before it was successfully initialized, or we
would need more sophisticated cleanup on child initialization failure,
like cleaning up the process table and suppressing SIGCHILD delivery
with multiple threads ("waitproc") involved. Compared to that, the
potential slowdown due to an extra yield () call should be negligible.
Pause the child process after performing fork fixups even if there were
no dynamically loaded dlls with extra data/bss transfers to wait for.
This allows the parent process to cancel the current fork call even if
the child process was successfully initialized already.
This is a preparation for when the parent does remember the child no
earlier than after successful child initialization.
Querying the ntlength and existence of the /var/run/cygfork directory in
the very first Cygwin process should not use nt_max_path_buf, as that
one is used by dll_list::alloc already.
NtQueryVirtualMemory for MemorySectionName may return some old path even
if the process was just started, for when some directory in between was
renamed - maybe because the NT file cache is hot for the old path still.
This was seen during gcc bootstrap, returning a MemorySectionName of
".../gcc/xgcc.exe" even if started as ".../prev-gcc/xgcc.exe", where the
directory rename from "gcc" to "prev-gcc" was done the moment before.
As we stat the module's real file right after loading now, there is no
point in using NtQueryVirtualMemory with MemorySectionName any more, and
we can use what GetModuleFileName returned instead.
newlib's vfwscanf(3) (or specifically, __SVFWSCANF_R()) fails to correctly set
the assignment-suppressing character (`*') flag[1] which, when present in the
formatting string, results in undefined behaviour comprising retrieving and
dereferencing a pointer that was not supplied by the caller as such or at all.
When compared to the vfscanf(3) implementation, this would appear to be over
the missing goto match_failure statement preceded by the flags test seen below.
Hence, this patch (re)introduces it.
[1] <http://pubs.opengroup.org/onlinepubs/009695399/functions/fwscanf.html>
--
-Add vendor identification
-Support in get_cpu_cache
Background:
Chengdu Haiguang IC Design Co., Ltd (Hygon) is a Joint Venture
between AMD and Haiguang Information Technology Co.,Ltd., aims at
providing high performance x86 processor for China server market.
Its first generation processor codename is Dhyana, which
originates from AMD technology and shares most of the
architecture with AMD's family 17h, but with different CPU Vendor
ID("HygonGenuine")/Family series number(Family 18h).
Related Hygon kernel patch can be found on:
http://lkml.kernel.org/r/5ce86123a7b9dad925ac583d88d2f921040e859b.1538583282.git.puwen@hygon.cn
Signed-off-by: Jinke Fan <fanjinke@hygon.cn>
A commit from 2016 tried to address this GCC provided <stddef.h> issue
#if (defined (__FreeBSD__) && (__FreeBSD__ >= 5)) \
|| defined(__DragonFly__) \
|| defined(__FreeBSD_kernel__)
/* __size_t is a typedef on FreeBSD 5, must not trash it. */
#elif defined (__VMS__)
/* __size_t is also a typedef on VMS. */
#else
#define __size_t
#endif
with an include of <stddef.h> before <sys/_types.h> in <sys/types.h>.
Is is not robust enough. Do the include of <stddef.h> in <sys/_types.h>
directly and request only the necessary types.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Ken Brown
Corinna Vinschen
Jeff Johnston
Mark Geisert
Martin Erik Werner
Alexander Fedotov
Jozef Lawrynowicz
trasz
pfg
Ben Wijen
Yaakov Selkowitz
Michael Haubenwallner
Lucio Andrés Illanes Albornoz
Jinke Fan
Sebastian Huber