Commit Graph

306 Commits

Author SHA1 Message Date
Paolo Bonzini 7e958b2e6a 2005-12-19 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Select appropriate fragments for PowerPC/AIX.
	* configure: Regenerate.

	* Makefile.def (flags_to_pass): Add ADAFLAGS, BOOT_ADAFLAGS,
	BOOT_CFLAGS, BOOT_LDFLAGS.
	* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Handle BOOT_ADAFLAGS,
	BOOT_CFLAGS, BOOT_LDFLAGS.
	(TARGET_FLAGS_TO_PASS): Handle ADAFLAGS_FOR_TARGET.
	(stage[+id+]-bubble): Pass flags recursively to the comparison target.
	(stage): Fail if we cannot complete the work.

config:
2005-12-19  Paolo Bonzini  <bonzini@gnu.org>

        * mt-ppc-aix, mh-ppc-aix: New.
2005-12-19 17:33:45 +00:00
Paolo Bonzini 15b527ca89 2005-12-14 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Flip the top-level bootstrap switch.
	* configure: Regenerate.

	Merge from gcc:

	2005-12-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.tpl: Throughout the file, use : $(MAKE) along with
        $(stage) and $(unstage).
        (EXTRA_TARGET_FLAGS): Correct double-quoting.
        (all): Remove stray semicolon.
        (local-distclean): Don't handle multilib.tmp and multilib.out.
        (install.all): Set $s for consistency.
        (configure-[+prefix+][+module+]): Instead of [+deps+], handle
        check_multilibs setting.  Always make the install directory.
        (configure-stage[+id+]-[+prefix+][+module+]): Likewise.
        Correct @if/@endif.
        (all-stage[+id+]-[+prefix+][+module+]): Correct @if/@endif.
        ($(TARGET_SUBDIR)/[+module+]/multilib.out): Remove.
        (stage[+id+]-start, stage[+id+]-end): Stage $(TARGET_SUBDIR).
        (multilib.out): Remove.
        * Makefile.in: Regenerated.
2005-12-14 18:00:22 +00:00
Nathan Sidwell 74ecef0dea Rename ms1 to mt, part 1
* config.sub: Replace ms1 arch with mt.  Allow ms1 as alias.
	* configure.in: Replace ms1 arch with mt.
	* configure: Rebuilt.

	* bfd/Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES,
	BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Replace ms1 with mt.
	(cpu_mt.lo, elf32-mt.lo): Update target and dependency names.
	* bfd/Makefile.in: Rebuilt.
	* bfd/config.bfd: Replace ms1 arch with mt.
	* bfd/configure.in: Replace ms1 files with mt files.
	* bfd/configure: Rebuilt.
	* bfd/elf32-mt.c: Renamed from elf32-ms1.c.  Update include files.
	* bfd/cpu-mt.c: Renamed from cpu-ms1.c.

	* cpu/mt.cpu: Rename from ms1.cpu.
	* cpu/mt.opc: Rename from ms1.opc.

	* binutils/Makefile.am: Replace ms1 files with mt files.
	* binutils/Makefile.in: Rebuilt.
	* binutils/readelf.c (elf/mt.h): Adjust #include.

	* gas/configure.in: Replace ms1 arch with mt arch.
	* gas/configure: Rebuilt.
	* gas/configure.tgt: Replace ms1 arch with mt arch.
	* gas/config/tc-mt.c: Renamed from tc-ms1.c: Update include files.

	* gas/doc/Makefile.am (CPU_DOCS): Replace ms1 files with mt files.
	* gas/doc/Makefile.in: Rebuilt.

	* gas/testsuite/gas/mt: Renamed from ms1 dir.  Update file names as
	needed.
	* gas/testsuite/gas/mt/errors.exp: Replace ms1 arch with mt arch.
	* gas/testsuite/gas/mt/mt.exp: Replace ms1 arch with mt arch.
	* gas/testsuite/gas/mt/relocs.exp: Replace ms1 arch with mt arch.

	* gdb/configure.tgt: Replace ms1 arch with mt arch.
	* gdb/config/mt: Renamed from ms1 dir.  Update file names as needed.
	* gdb/config/mt/mt.mt (TDEPFILES): Replace ms1 file with mt file.

	* include/elf/mt.h: Renamed from ms1.h

	* ld/Makefile.am (ALL_EMULATIONS): Replace ms1 files with mt files.
	(eelf32mt.c): Update target name and dependencies.
	* ld/Makefile.in: Rebuilt.
	* ld/configure.tgt: Replace ms1 arch with mt arch.
	* ld/emulparams/elf32mt.sh: Renamed from elf32ms1.sh. Update
	comment.

	* libgloss/configure.in: Replace ms1 arch with mt arch.
	* libgloss/configure: Rebuilt.
	* libgloss/mt: Renamed from ms1 dir.

	* newlib/configure.host: Replace ms1 arch with mt arch.
	* newlib/libc/machine/mt: Renamed from ms1 dir.

	* opcodes/Makefile.am (CLEANFILES, CGEN_CPUS, MT_DEPS): Replace ms1
	with mt.
	* opcodes/Makefile.in: Rebuilt.
	* opcodes/configure.in: Replace ms1 files with mt files.
	* opcodes/configure: Rebuilt.

	* sid/component/cgen-cpu/mt: Renamed from ms1 dir.  Update file
	names as appropriate.
	* sid/component/cgen-cpu/mt/Makefile.am: Replace ms1 files with mt
	files.
	* sid/component/cgen-cpu/mt/Makefile.in: Rebuilt.
2005-12-12 11:25:07 +00:00
Paolo Bonzini a7dc05b5d1 toplevel:
2005-12-05  Paolo Bonzini  <bonzini@gnu.org>

	Sync with gcc:

	2005-12-05  Paolo Bonzini  <bonzini@gnu.org>

        * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
        CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
        "CONFIGURED_" from the AC_CHECK_PROGS invocation.  Move below.
        Find in-tree tools if available.
        (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
        (CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
        (*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
        (COMPILER_*_FOR_TARGET): New.
        * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
        (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
        (CONFIGURED_*, USUAL_*): Remove.
        (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
        STRIP): Use autoconf substitutions.
        (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
        COMPILER_NM_FOR_TARGET): New.
        (EXTRA_HOST_FLAGS): Pass LIPO and STRIP.

        (all): Make all-host and all-target in parallel.
        (do-[+make_target+], do-check, install, [+compare-target+]): Ensure
        that $$r and $$s are set before invoking a recursive make.
        (stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
        ([+bootstrap-target+]): Inline most of the `all' target.

	2005-11-29  Ben Elliston  <bje@au.ibm.com>

        * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
        from the gcc build directory.
        * Makefile.in: Regenerate.

	2005-11-29  Ben Elliston  <bje@au.ibm.com>

        * Makefile.def: Add new libdecnumber host_module.  Make all-gcc
        depend on all-libdecnumber.
        * configure.in (host_libs): Include libdecnumber.
        * Makefile.in: Regenerate.
        * configure: Likewise.

	2005-11-21  Kean Johnston  <jkj@sco.com>

        * config.sub, config.guess: Sync from upstream sources.

config:
2005-12-05  Paolo Bonzini  <bonzini@gnu.org>

	* acx.m4 (GCC_TARGET_TOOL): New.
2005-12-05 15:16:05 +00:00
Daniel Jacobowitz 81cdf522c2 * Makefile.def: Remove gdb dependencies for gdbtk.
* Makefile.tpl (CONFIGURE_GDB_TK, INSTALL_GDB_TK): New variables.
	(configure-gdb, install-gdb): New rules.
	* configure.in: Set CONFIGURE_GDB_TK and INSTALL_GDB_TK.
	* Makefile.in, configure: Regenerated.
2005-11-11 21:45:22 +00:00
Bernd Schmidt a68fc753b9 * configure.in (bfin-*-*): Use test, not brackets, in if statement.
* configure: Regenerate.
2005-10-17 12:54:34 +00:00
Kazu Hirata 458e656498 * configure.in (arm-*-linux-gnueabi): Add to noconfigdirs
target-libffi, target-qthreads, target-libjava, and
	targetlibobjc.
	* configure: Regenerate.
2005-10-09 16:35:55 +00:00
Daniel Jacobowitz 51c8a2133a * Makefile.def (flags_to_pass): Add OBJDUMP_FOR_TARGET.
* Makefile.tpl (BASE_TARGET_EXPORTS): Add OBJDUMP.
	(OBJDUMP_FOR_TARGET, CONFIGURED_OBJDUMP_FOR_TARGET)
	(USUAL_OBJDUMP_FOR_TARGET): New.
	(EXTRA_TARGET_FLAGS): Add OBJDUMP.
	* configure.in: Check for $OBJDUMP_FOR_TARGET.
	* configure, Makefile: Regenerated.
2005-10-06 15:24:36 +00:00
Paolo Bonzini 168b158c6f 2005-10-05 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/22340

	* configure.in (default_target): Remove.
	* Makefile.tpl (all): Do not use prerequisites as subroutines
	(all) [gcc-bootstrap]: Bootstrap gcc first if it was not done yet.
	(do-[+make_target+], check, install, [+bootstrap_target+]): Do not
	use prerequisites as subroutines.
	(check-host, check-target): New.
	(bootstrap configure & all targets): Do not use stage*-start
	if the directory layout is already ok.
	(non-bootstrap configure & all targets): Prepend a $(unstage).
	(stage[+id+]-bubble): Do that here.  Do not use NOTPARALLEL.
	(NOTPARALLEL): Remove.
	(unstage, stage variables): New variables.
	(unstage, stage targets): Simply expand to those variables.

	* configure: Regenerate.
	* Makefile.in: Regenerate.
2005-10-05 07:30:22 +00:00
Catherine Moore f69e2532cf Regenerated with 2.13 version of autoconf. 2005-10-03 15:35:57 +00:00
Catherine Moore 76402c8004 * configure.in (bfin-*-*): Support bfin.
* configure: Regenerated.
2005-10-03 15:11:13 +00:00
H.J. Lu 56fa079851 2005-09-30 H.J. Lu <hongjiu.lu@intel.com>
* configure.in (*-*-darwin*): Build bfd, binutils and opcodes.
	* configure: Regenerated.
2005-09-30 14:50:57 +00:00
Geoffrey Keating 6a33f745c0 Index: ChangeLog
2005-09-28  Geoffrey Keating  <geoffk@apple.com>

	* Makefile.tpl (BASE_TARGET_EXPORTS): Add LIPO, STRIP.
	(LIPO_FOR_TARGET): New.
	(CONFIGURED_LIPO_FOR_TARGET): New.
	(USUAL_LIPO_FOR_TARGET): New.
	(STRIP_FOR_TARGET): New.
	(CONFIGURED_STRIP_FOR_TARGET): New.
	(USUAL_STRIP_FOR_TARGET): New.
	* Makefile.def (flags_to_pass): Add LIPO_FOR_TARGET and
	STRIP_FOR_TARGET.
	* configure.in: Set LIPO_FOR_TARGET, STRIP_FOR_TARGET,
	CONFIGURED_LIPO_FOR_TARGET, CONFIGURED_STRIP_FOR_TARGET.
	* Makefile.in: Regenerate.
	* configure.in: Regenerate.

Index: gcc/ChangeLog
2005-09-28  Geoffrey Keating  <geoffk@apple.com>

	* Makefile.in: Export LIPO_FOR_TARGET, STRIP_FOR_TARGET.
	(stage1-start): Delete old libgcc and libunwind before moving
	anything into the stage directory.
	(stage2-start): Likewise.
	(stage3-start): Likewise.
	(stage4-start): Likewise.
	(stageprofile-start): Likewise.
	(stagefeedback-start): Likewise.
	* config.gcc (*-*-darwin*): Automatically use CPU-specific darwin.h
	header in tm_file and CPU-specific t-darwin in tmake_file.
	(i[34567]86-*-darwin*): Don't change tm_file.
	(powerpc-*-darwin*): Don't change tm_file or tmake_file.
	* config/darwin.h (REAL_LIBGCC_SPEC): Rewrite to use proper libgcc
	shared library stub for target OS version.
	* config/t-slibgcc-darwin (SHLIB_SOLINK): Delete.
	(SHLIB_LINK): Don't make SHLIB_SOLINK.
	(SHLIB_INSTALL): Don't install SHLIB_SOLINK.
	(libgcc_s.%.dylib): New.
	(LIBGCC): Define.
	(install-darwin-libgcc-stubs): New.
	(INSTALL_LIBGCC): New append.
	* config/i386/darwin-libgcc.10.4.ver: New.
	* config/i386/darwin-libgcc.10.5.ver: New.
	* config/i386/t-darwin: New.
	* config/rs6000/darwin-libgcc.10.4.ver: New.
	* config/rs6000/darwin-libgcc.10.5.ver: New.
	* config/rs6000/darwin.h (REAL_LIBGCC_SPEC): Delete.
	* config/rs6000/t-darwin (SHLIB_VERPFX): Define.
2005-09-29 01:00:26 +00:00
David Edelsohn c2105cb94d 2005-09-19 David Edelsohn <edelsohn@gnu.org>
* configure.in (powerpc-*-aix*): Add target-libssp to noconfigdirs.
        (rs6000-*-aix*): Same.
        * configure: Regenerate.

2005-09-14  Francois-Xavier Coudert  <coudert@clipper.ens.fr>

        * configure.in: Recognize f95 in the --enable-languages option,
        and substitute it for fortran, issuing a warning.
        * configure: Regenerate.
2005-09-20 03:13:02 +00:00
DJ Delorie 062c2fa42f 2005-08-30 Phil Edwards <phil@codesourcery.com>
* configure.in (*-*-vxworks*):  Add target-libstdc++-v3 to noconfigdirs.
* configure:  Regenerated.
2005-09-01 21:03:00 +00:00
Paolo Bonzini 60cfca657c toplevel:
2005-08-12  Paolo Bonzini  <bonzini@gnu.org>

	* configure.in: Replace NCN_STRICT_CHECK_TOOL with
	NCN_STRICT_CHECK_TOOLS, and likewise for NCN_STRICT_CHECK_TARGET_TOOLS.
	Look for alternate names of the target cc and c++

config:
2005-08-12  Paolo Bonzini  <bonzini@gnu.org>

	* config/acx.m4 (NCN_CHECK_TARGET_TOOL, NCN_STRICT_CHECK_TOOL,
	NCN_STRICT_CHECK_TARGET_TOOL): Remove.
	(NCN_STRICT_CHECK_TOOLS, NCN_STRICT_CHECK_TARGET_TOOLS): New,
2005-08-12 14:22:33 +00:00
Paolo Bonzini 5fb28bccde 2005-08-08 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET,
	GCC_FOR_TARGET, RAW_CXX_FOR_TARGET, GFORTRAN_FOR_TARGET): Find
	them with NCN_STRICT_CHECK_TARGET_TOOL, like the other target
	tools; remove code to manually set them.
	(Target tools): Look in the environment for them.
	* Makefile.tpl (CC_FOR_TARGET, CXX_FOR_TARGET, GCJ_FOR_TARGET,
	GCC_FOR_TARGET, RAW_CXX_FOR_TARGET, GFORTRAN_FOR_TARGET): Redefine.
	(AS_FOR_TARGET, LD_FOR_TARGET, NM_FOR_TARGET): Look into gcc
	build directory.
	(CONFIGURED_CC_FOR_TARGET, CONFIGURED_CXX_FOR_TARGET,
	CONFIGURED_GCJ_FOR_TARGET, CONFIGURED_GCC_FOR_TARGET,
	CONFIGURED_GFORTRAN_FOR_TARGET, USUAL_CC_FOR_TARGET,
	USUAL_CXX_FOR_TARGET, USUAL_GCJ_FOR_TARGET, USUAL_GCC_FOR_TARGET,
	USUAL_RAW_CXX_FOR_TARGET, USUAL_GFORTRAN_FOR_TARGET): New.
	(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE,
	RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, RECURSE_FLAGS): Delete.
	* configure: Regenerate.
	* Makefile.in: Regenerate.
2005-08-08 09:21:05 +00:00
Mark Mitchell 9b992990df * config/mt-gnu (CXXFLAGS): Include SYSROOT_CFLAGS_FOR_TARGET.
* Makefile.tpl (SYSROOT_CFLAGS_FOR_TARGET): New variable.
	(CFLAGS_FOR_TARGET): Use it.
	(CXXFLAGS_FOR_TARGET): Likewise.
	* Makefile.in: Regenerated.
	* configure.in (--with-build-sysroot): New option.
	* configure: Regenerated.
2005-07-27 18:00:57 +00:00
Jim Blandy 7feeb04353 ChangeLog:
2005-07-14  Jim Blandy  <jimb@redhat.com>

	* configure.in: Add cases for Renesas m32c.
	* configure: Regenerated.

bfd/ChangeLog:
2005-07-14  Jim Blandy  <jimb@redhat.com>

	Add support for m32c-*-elf (Renesas m32c and m16c).
	* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
	(ALL_MACHINES_CFILES): Add cpu-m32c.c.
	(BFD32_BACKENDS): Add elf32-m32c.lo.
	(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
	(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
	* Makefile.in: Regenerated.
	* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
	arch and mach codes.
	(bfd_m32c_arch): New arch info object.
	(bfd_archures_list): List bfd_m32c_arch.
	* bfd-in2.h: Regenerated.
	* config.bfd: Add case for the m32c.
	* configure.in: Add case for the m32c.
	* configure: Regenerated.
	* cpu-m32c.c, elf32-m32c.c: New files.
	* libbfd.h: Regenerated.
	* targets.c (bfd_elf32_m32c_vec): Declare.
	(_bfd_target_vector): List bfd_elf32_m32c_vec.

binutils/ChangeLog:
2005-07-14  Jim Blandy  <jimb@redhat.com>

	* readelf.c: #include "elf/m32c.h"
	(guess_is_rela, dump_relocations, get_machine_name): Add cases for
	EM_M32C.
	* Makefile.am (readelf.o): Update dependencies.
	* Makefile.in: Regenerated.

cpu/ChangeLog:
2005-07-14  Jim Blandy  <jimb@redhat.com>

	* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.

gas/ChangeLog:
2005-07-14  Jim Blandy  <jimb@redhat.com>

	Add support for the Renesas M32C.
	* Makefile.am (CPU_TYPES): List m32c.
	(TARGET_CPU_CFILES): List config/tc-m32c.c.
	(TARGET_CPU_HFILES): List config/tc-m32c.h.
	* configure.in: Add case for m32c.
	* configure.tgt: Add cases for m32c and m32c-*-elf.
	* configure: Regenerated.
	* config/tc-m32c.c, config/tc-m32c.h: New files.
	* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
	* doc/Makefile.in: Regenerated.
	* doc/all.texi: Set M32C.
	* doc/as.texinfo: Add text for the M32C-specific options and line
	comment characters, and refer to c-m32c.texi.
	* doc/c-m32c.texi: New file.

include/ChangeLog:
2005-07-14  Jim Blandy  <jimb@redhat.com>

	* dis-asm.h (print_insn_m32c): New declaration.

include/elf/ChangeLog:
2005-07-14  Jim Blandy  <jimb@redhat.com>

	Add support for Renesas M32C and M16C.
	* common.h (EM_M32C): New machine number.
	* m32c.h: New file.

ld/ChangeLog:
2005-07-14  Jim Blandy  <jimb@redhat.com>

	Add support for the Renesas M32C and M16C.
	* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
	(eelf32m32c.c): New target.
	* Makefile.in: Regenerated.
	* configure.tgt: Add case for m32c-*-elf.
	* emulparams/elf32m32c.sh: New file.

opcodes/ChangeLog:
2005-07-14  Jim Blandy  <jimb@redhat.com>

	Add support for the Renesas M32C and M16C.
	* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
	* m32c-desc.h, m32c-opc.h: New.
	* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
	(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
	m32c-opc.c.
	(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
	m32c-ibld.lo, m32c-opc.lo.
	(CLEANFILES): List stamp-m32c.
	(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
	(CGEN_CPUS): Add m32c.
	(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
	(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
	(m32c_opc_h): New variable.
	(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
	(m32c-opc.lo): New rules.
	* Makefile.in: Regenerated.
	* configure.in: Add case for bfd_m32c_arch.
	* configure: Regenerated.
	* disassemble.c (ARCH_m32c): New.
	[ARCH_m32c]: #include "m32c-desc.h".
	(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
	(disassemble_init_for_target) [ARCH_m32c]: Same.

	* cgen-ops.h, cgen-types.h: New files.
	* Makefile.am (HFILES): List them.
	* Makefile.in: Regenerated.
2005-07-14 22:52:16 +00:00
Eric Christopher 3d93afbc76 2005-07-13 Eric Christopher <echristo@redhat.com>
* configure.in: Add toplevel noconfigdir support for tpf.
	* configure: Regenerate.
2005-07-14 00:12:07 +00:00
DJ Delorie 2c193664e3 merge from gcc:
2005-07-11  Jakub Jelinek  <jakub@redhat.com>

	* Makefile.def (target_modules): Add libssp.
	* configure.in (target_libraries): Add target-libssp.
	* configure: Rebuilt.
	* Makefile.in: Rebuilt.
2005-07-11 16:48:34 +00:00
Kazu Hirata fa19ba072d * configure.in: Add --enable-libssp and --disable-libssp.
* configure: Regenerate with autoconf-2.13.
2005-07-07 02:24:02 +00:00
Geoffrey Keating bbaae19bd1 * configure.in: Don't build sim or rda when targetting darwin.
* configure: Regenerate.
2005-07-07 01:14:34 +00:00
Hans-Peter Nilsson 7066fc51d7 * configure.in <cris-*, crisv32-*>: Enable target-libffi again for
*-*-linux* and *-*-elf.
	* configure: Regenerate.
2005-06-07 09:33:44 +00:00
Hans-Peter Nilsson c2908dd79c Sync with gcc-toplevel 2005-06-07 06:18:26 +00:00
Hans-Peter Nilsson aac893c5dd * configure.in (unsupported_languages): New macro.
<mmix-knuth-mmixware>: Set unsupported_languages.  Name explicit
	non-ported target libraries in noconfigdirs.
	<cris-*, crisv32-*> Ditto, except for non-aout, non-elf,
	non-linux-gnu.  Remove libgcj_ex_libffi.
 	<lang_frag loop>: Set add_this_lang=no if the language is in
	unsupported_languages.
	* configure: Regenerate.
2005-06-07 00:04:15 +00:00
DJ Delorie e875be5876 * configure.in: Fix typo in handling of --with-mpfr-dir.
* configure: Regenerate.
2005-06-06 18:36:50 +00:00
Aldy Hernandez 66cb6a193c * configure.in: Set noconfigdirs for ms1.
* configure: Regenerate.
2005-06-02 19:56:31 +00:00
Paul Brook 57bcaf2d91 2005-05-19 Paul Brook <paul@codesourcery.com>
* configure.in: Rewrite misleading error message when requested
	language cannot be built.
	* configure: Regenerate.
2005-05-19 20:25:24 +00:00
Mike Stump 297306009e * configure.in: Always pass --target to target configures as
otherwise rebuilds that do --recheck will fail.
        * confiugure: Rebuilt.
2005-05-05 01:36:32 +00:00
Paolo Bonzini 0d3442bf36 2005-04-29 Paolo Bonzini <bonzini@gnu.org>
Sync from gcc:

	2005-04-22  Bernd Schmidt  <bernd.schmidt@analog.com>

        * config.sub: Update from master copy.

	2005-04-19  Hans-Peter Nilsson  <hp@axis.com>

        * configure.in <crisv32-*-*, cris-*-*>: New local variable
        libgcj_ex_libffi.  Have specific match for *-*-linux*.  Separate
        matches for "*-*-aout" and "*-*-elf".  Don't disable libffi for
        "*-*-elf" and "*-*-linux*".
        * configure: Regenerate.

config:
2005-04-29  Paolo Bonzini  <bonzini@gnu.org>

	* acx.m4 (ACX_PROG_GNAT): Remove stray break.
2005-04-29 14:00:03 +00:00
Joern Rennecke 5b5312972a * config/mh-mingw32: Delete.
* configure.in: Don't use it.
	* configure: Regenerate.
2005-03-30 18:36:33 +00:00
Paolo Bonzini f3fd76d418 2005-02-28 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (bfd, opcodes, libstdc++-v3, libmudflap): Set lib_path.
	* Makefile.tpl (SET_LIB_PATH, REALLY_SET_LIB_PATH): Remove.
	(HOST_EXPORTS, STAGE_HOST_EXPORTS, TARGET_EXPORTS): Set $(RPATH_ENVVAR).
	(HOST_LIB_PATH): Generate from Makefile.def.
	(TARGET_LIB_PATH): Likewise.
	(Old bootstrap targets): Include TARGET_LIB_PATH into RPATH_ENVVAR.
	* Makefile.in: Regenerate.
	* configure.in (set_lib_path, SET_LIB_PATH, SET_GCC_LIB_PATH): Remove.
	(RPATH_ENVVAR): Include Darwin case.
	* configure: Regenerate.

config:
2005-02-28  Paolo Bonzini  <bonzini@gnu.org>

	* config/gcc-lib-path.m4: Remove.
2005-03-30 08:39:18 +00:00
Paolo Bonzini d34bd810e6 2005-03-25 Paolo Bonzini <bonzini@gnu.org>
* configure.in (RPATH_ENVVAR): Set to DYLD_LIBRARY_PATH on Darwin.
	* configure: Regenerate.
2005-03-25 09:02:30 +00:00
Zack Weinberg 9e6daff153 top:
* Makefile.def: Remove libstdcxx_incdir, libsubdir, gxx_include_dir,
	gcc_version, and gcc_version_trigger from set of flags to pass.
	* Makefile.tpl: Remove definitions of above variables.
	(config.status): Remove dependency on $(gcc_version_trigger).
	* Makefile.in: Regenerate.
	* configure.in: Do not reference config/gcc-version.m4 nor
	config/gxx-include-dir.m4.  Do not invoke TL_AC_GCC_VERSION nor
	TL_AC_GXX_INCLUDE_DIR.  Do not set gcc_version_trigger.
	* configure: Regenerate.
config:
	* gxx-include-dir.m4: In all substitutions, leave $(gcc_version)
	to be expanded by the Makefile.
2005-03-22 00:49:18 +00:00
Paolo Bonzini 7fc2ca22c1 2005-02-28 Paolo Bonzini <bonzini@gnu.org>
Sync from gcc.

	2005-02-28  Paolo Bonzini  <bonzini@gnu.org>

	PR bootstrap/17383
	* Makefile.def (target_modules): Remove "stage", now unnecessary.
	* Makefile.tpl (HOST_SUBDIR): New substitution.
	(STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET,
	USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET,
	USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET,
	USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it.
	(Host modules, Bootstrapped modules): Use it.
	(Build modules, Target modules): Do not create symlink trees,
	always configure out-of-srcdir.
	(distclean): Try removing $(host_subdir) with rm before using rm -rf.
	* configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET,
	GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use
	$(HOST_SUBDIR).  Create a symlink for host_subdir.

	* Makefile.in: Regenerate.
	* configure: Regenerate.

	Merged from libada-gnattools-branch:
	2004-11-28  Nathanael Nerode  <neroden@gcc.gnu.org>

	* Makefile.def: Add gnattools as a module, depending on target-libada.
	* Makefile.in: Regenerate.
	* configure.in: Include gnattools in host_tools; disable it if ada
	is disabled.
	* configure: Regenerate.

config:
2005-02-28  Paolo Bonzini  <bonzini@gnu.org>

	PR bootstrap/17383
	* acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src
	gcc build is going.
2005-02-28 14:07:03 +00:00
Nick Clifton 4add0a4e2f configure: Regenerate. 2005-02-23 10:07:06 +00:00
Eric Botcazou 2caa45c45a PR libgcj/10353
* configure.in (noconfigdirs) <sparc-*-solaris2.[0-6]>: Add libgcj.
	* configure: Regenerate.
2005-02-21 12:29:05 +00:00
Hans-Peter Nilsson 139acfca40 * configure.in (noconfigdirs) <crisv32-*-*>: Match like cris-*-*.
<crisv32-*-*, cris-*-*>: Only disable target-newlib and
	target-libgloss when not *-*-elf and *-*-aout.
	* configure: Regenerate.
2005-01-29 04:24:23 +00:00
Joern Rennecke 0d549859a5 2004-12-16 Andrew Stubbs <andrew.stubbs@st.com>
* configure.in (sh64-*-*): Reenable gprof.
	* configure: Regenerate.
2004-12-16 19:51:28 +00:00
Richard Sandiford e51613764b Introduce config/gxx-include-dir.m4. 2004-12-03 10:47:07 +00:00
Richard Sandiford fdc1bab19d Remove config.if. 2004-12-03 10:30:06 +00:00
Richard Sandiford f9095d09fe * configure.in: Clear gcc_version_trigger if the file doesn't exist.
* configure: Regenerate.
2004-12-02 14:08:01 +00:00
Richard Sandiford afdaeaab51 Introduce and use config/gcc-version.m4. 2004-12-02 11:09:36 +00:00
John David Anglin 53af4f25f2 * configure.in (hppa*-*-linux*): Don't add libgcj to noconfigdirs.
(hppa*64*-*-*): Delete incorrect comment.
	* configure: Rebuilt.
2004-11-26 23:57:58 +00:00
Geoffrey Keating afaa92f981 PR 18423
* configure.in: Remove all instances of build-fixincludes from
	noconfigdirs.
	(build_configargs): Supply --target to subdirectories.
	* configure: Regenerate.

	* Makefile.def: Make gcc install depend on fixincludes install.
	* Makefile.in: Regenerate.
2004-11-12 19:38:13 +00:00
Hans-Peter Nilsson 963a158bbf * configure.in (noconfigdirs) [mmix-*-*]: Disable
target-libgfortran.
	* configure: Regenerate.
2004-11-08 22:14:59 +00:00
Geoffrey Keating 5350aa8b89 Merge from GCC versions 2004-11-05 05:26:34 +00:00
DJ Delorie 749f577ffa Regenerated with correct autoconf 2004-11-04 18:42:47 +00:00
H.J. Lu 78cc81ff4c 2004-11-04 H.J. Lu <hongjiu.lu@intel.com>
PR other/17783
	* configure.in: Set up LD_LIBRARY_PATH by default for gcc.
	* configure: Regenerated.
2004-11-04 17:07:08 +00:00
Daniel Jacobowitz 7c0ad5eddf ./
* configure.in (arm-*-oabi*, thumb-*-oabi*): Remove.
	* configure: Regenerated.
bfd/
	* Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Replace
	elfarm-nabi with elf32-arm.  Remove elfarm-oabi.
	(elf32-arm.lo): Replace elfarm-nabi.lo rule.  Remove elf32-arm.h
	dependency.
	* config.bfd: Move arm-*-oabi* and thumb-*-oabi* from obsolete list
	to a new removed list.  Remove normal configuration stanzas.
	* configure.in: (bfd_elf32_bigarm_vec, bfd_elf32_bigarm_symbian_vec)
	(bfd_elf32_littlearm_symbian_vec, bfd_elf32_littlearm_vec): Replace
	elfarm-nabi.lo with elf32-arm.lo.
	(bfd_elf32_bigarm_oabi_vec, bfd_elf32_littlearm_oabi_vec): Remove.
	* elf32-arm.c: Renamed from elfarm-nabi.c.  Inline elf32-arm.h.
	* elf32-arm.h: Remove.
	* elfarm-oabi.c: Remove.
	* targets.c (_bfd_target_vector): Remove bfd_elf32_bigarm_oabi_vec
	and bfd_elf32_littlearm_oabi_vec.
	* aclocal.m4, Makefile.in, configure, doc/Makefile.in: Regenerated.
gas/
	* configure.in: Remove arm-*-oabi and thumb-*-oabi.
	* config/tc-arm.c (target_oabi): Delete.
	(md_apply_fix3, elf32_arm_target_format): Remove target_oabi checks.
	(arm_opts): Remove moabi.
	* doc/as.texinfo (Overview): Remove documentation of -moabi.
	* doc/c-arm.texi (ARM Options): Likewise.
	* configure: Regenerated.
ld/
	* Makefile.am (ALL_EMULATIONS): Remove earmelf_oabi.o.
	(earmelf_oabi.c): Remove rule.
	* configure.tgt: Remove arm-*-oabi and thumb-*-oabi.
	* emulparams/armelf_oabi.sh, emultempl/armelf_oabi.em: Delete files.
	* Makefile.in: Regenerated.
2004-11-04 15:54:22 +00:00
Aaron W. LaFramboise 60152eb403 PR target/18151
* configure.in (case ${target}): Do not build fixincludes for avr.
       * configure: Regenerated.
2004-10-28 19:43:35 +00:00
Aaron W. LaFramboise 3d43992262 * configure.in (case ${target}): Do not build fixincludes
on platforms where it is not used.
	* configure: Regenerated.
----------------------------------------------------------------------
2004-10-26 20:39:00 +00:00
Daniel Jacobowitz 714fa3b8a5 * configure.in: Use an absolute path to install-sh.
* configure: Regenerated.
2004-10-23 20:30:02 +00:00
DJ Delorie 4ea74b34c3 merge from gcc
2004-10-12  Kelley Cook  <kcook@gcc.gnu.org>
	* configure.in (*-*-cygwin*): Supress warning if newlib not present.
	* configure: Regenerate.
2004-10-12 23:40:03 +00:00
Nick Clifton 36ad66d986 Enable target-libgloss for crx-*-*. 2004-09-30 16:34:36 +00:00
Richard Sandiford 09ebdaf715 * configure.in (--without-headers): Add missing double quotes.
* configure: Regenerate.
2004-09-29 11:43:26 +00:00
H.J. Lu 9ab64c4a44 2004-09-23 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.tpl (REALLY_SET_LIB_PATH): Add @SET_GCC_LIB_PATH@.
	(HOST_EXPORTS]): Add @SET_GCC_LIB_PATH@. Set and export
	SET_GCC_LIB_PATH_CMD.
	(BASE_TARGET_EXPORTS): Likewise.
	* Makefile.in: Regenerated.

	* configure.in (SET_GCC_LIB_PATH): Set and substitute.
	* configure: Regenerated.

config/

2004-09-23  H.J. Lu  <hongjiu.lu@intel.com>

	* gcc-lib-path.m4: New file.
2004-09-24 00:40:22 +00:00
DJ Delorie 8199a77ffb Merge from gcc:
2004-09-23  Kelley Cook  <kcook@gcc.gnu.org>
	* config.guess: New upstream version
	* compile, depcomp, install-sh, ylwrap: Likewise.

	2004-09-19  Roger Sayle  <roger@eyesopen.com>
	* config/mh-x86omitfp: New host makefile fragment.  Add
	-fomit-frame-pointer to the default BOOT_CFLAGS.
	* configure.in: Use it to speed up bootstrap on some IA-32 hosts.
	* configure: Regenerate.

	2004-09-15  Andrew Pinski  <pinskia@physics.uc.edu>
	PR target/11572
	* configure.in (*-*-darwin*): Renable libobjc.
	* configure: Regenerate.
2004-09-23 19:54:49 +00:00
Daniel Berlin 04d55823da 2004-09-09 Daniel Berlin <dberlin@dberlin.org>
* Makefile.def: Remove libbanshee.
	* Makefile.tpl: Ditto.
	* configure.in: Ditto.
	* Makefile.in: Regen.
	* configure: Ditto.
2004-09-10 02:19:35 +00:00
Richard Henderson b330724fb9 * configure.in: Remove target-libstdc++-v3 from noconfigdirs for
*-*-netware, but add target-libmudflap.
        Consolidate *-*-netware targets (of which really only i?86 exists)
        into a single entry.
        * configure: Likewise.
2004-09-03 19:09:39 +00:00
Paolo Bonzini 99df82b9b4 2004-09-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (sorry): Remove.
	(clean-stage[+id+], clean-stage[+id+]-module): New targets.
	(cleanstrap targets): Depend on distclean, not distclean-stage1.
	(do-clean): Clean per-stage directories too.
	(do-distclean): Run distclean-stage1 too.
	(.NOTPARALLEL): Enable during toplevel bootstrap.
	(stage[+id+]-bubble): Enable parallel execution during
	the recursive invocation.
	* Makefile.in: Regenerate.

	Sync from gcc (moving the Makefile.in change to Makefile.tpl):

	2004-08-31  Robert Bowdidge <bowdidge@apple.com>

	* Makefile.in: Move BOOT_CFLAGS above host makefile fragment include.
	* configure.in: add test for powerpc-*-darwin* to specify makefile frag
	* configure: regenerate
	* config/mh-ppc-darwin: create file, override BOOT_CFLAGS for
        -mdynamic-no-pic
2004-09-01 07:48:07 +00:00
Paolo Bonzini 607d4cafec 2004-08-31 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (build_modules): Add fixincludes.
	(dependencies): Make gcc depend on fixincludes.
	* configure.in (build_tools): Add fixincludes.
	(build_configdirs): Always include build_libs.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
2004-08-31 10:16:19 +00:00
Paolo Bonzini ebc58bf810 2004-08-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (bootstrap stages): Add 'lean' parameter.
	* Makefile.tpl (configure-stageN-*, all-stageN-*): Turned into
	phony targets; do not generate timestamp files.
	(distclean-stageN): Remove references to their timestamp files.
	(restageN, touch-stageN): Remove.
	(stageN-bubble): Rewritten.
	(compare): Support lean bootstraps.
	* Makefile.in: Regenerate.

	* configure.in: Only warn when bootstrapping but
	build != host or build != target.  Support lean bootstraps.
	* configure: Regenerate.

	Sync from gcc:
	2004-08-26  Phil Edwards  <phil@codesourcery.com>

	* configure.in:  Give a better error message if GMP/MPFR are missing
	and a language needing them has been requested.
	* configure:  Regenerated.

	2004-08-25  Phil Edwards  <phil@codesourcery.com>

	* configure.in:  Print a list of available language front-ends if
	a requested one is missing.  Tidy stray tab characters.
	* configure:  Regenerated.
2004-08-30 08:05:42 +00:00
Paolo Bonzini 6a19fd82fa 2004-08-17 Paolo Bonzini <bonzini@gnu.org>
* Makefile.in: Regenerate.
	* configure: Regenerate.

	* Makefile.def (bootstrap-stage): Rename extra_*_flags to
	stage_*_flags.
	* Makefile.tpl (configure-[+module+], all-[+module+]): Exit
	for bootstrapped modules if toplevel bootstrap is going.
	(GCC bootstrap): Generate per-stage targets for all bootstrapped
	modules.  Adjust for changes in Makefile.def.  Enable several
	rules even in non-bootstrap mode, just to avoid peppering the
	template with unnecessary "@if/@endif gcc-bootstrap" pairs.
	(stage-[+prev+]-bubble): Remove.

	* Makefile.def (Dependencies): Depend on all-build-bison,
	all-build-flex, all-build-byacc, all-build-texinfo, rather
	than the host variations.
	* Makefile.tpl (BUILD_DIR_PREFIX): Remove.  Replace throughout
	with BUILD_SUBDIR.
	(BISON): Update for recent Bisons.
	(YACC): Fix typo.
	(cross): Depend on all-build.
	(all): Do not depend on all-build.
	(prebootstrap): Remove.
	(dep-kind): Accept separate prefixes for MODULE and ON variables.
	(Prebootstrap dependencies): Add them to the per-stage targets
	and to all-prebootstrap.
	* configure.in (build_configdirs): Always enable build_tools.
	(BUILD_DIR_PREFIX): Remove.

	* Makefile.def (gcc): Add target variable.
	(gdb, expect, guile, tk, tix): Replace with_x with extra_make_flags.
	* Makefile.tpl (Autogenerated `all-*' targets): Invoke $(TARGET-*)
	in the recursive `make', instead of hardwiring `all'.
	(Autogenerated TARGET-* variables): New.
2004-08-18 06:51:38 +00:00
Jim Wilson eb2d1dee1f Patch from Robert Millan for knetbsd-gnu/kfreebsd-gnu.
* configure.in: In noconfigdirs check, match GNU/k*BSD with GNU/Linux
(instead of FreeBSD).
* configure: Regenerate.
2004-08-17 22:09:17 +00:00
Nathanael Nerode 44397772f9 * Makefile.def, configure.in, src-release: Remove useless, bogus
references to tix.
	* Makefile.in, configure: Regenerate.
2004-08-12 22:59:53 +00:00
DJ Delorie cbd6bc1407 merge from gcc:
2004-08-09  Mark Mitchell  <mark@codesourcery.com>

	* configure.in (arm*-*-eabi*): New target.
	* configure: Regenerate.

2004-08-03  Paul Brook  <paul@codesourcery.com>

	* configure.in: Check for MPFR as well as GMP.
	* configure: Regenerate.
2004-08-11 17:32:56 +00:00
Mark Mitchell 07768fdb41 * configure.in (arm*-*-symbianelf*): Add ${libgcj} and
target-libiberty to noconfigdirs.
2004-08-04 16:12:06 +00:00
Nathanael Nerode 824cf27387 ChangeLog:
2004-08-01  Robert Millan  <robertmh@gnu.org>

	* configure.in: Turn mt-linux into mt-gnu. Use mt-gnu and enable
	libmudflap for all GNU-based systems (with Glibc).
	* configure: Regenerate.

config/ChangeLog:

2004-08-01  Robert Millan  <robertmh@gnu.org>

	* mt-linux: Rename to ...
	* mt-gnu: ... this.
2004-08-03 20:54:19 +00:00
Paolo Bonzini 96979a1832 2004-07-12 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Add noconfigdirs for crx-*-*.
	* configure: Regenerate.

2004-07-09  Loren J. Rittle <ljrittle@acm.org>

	* configure.in: Build libmudflap by default on FreeBSD.
	* configure: Regenerated.

2004-07-09  Mark Mitchell  <mark@codesourcery.com>

	* configure.in: Do not build libmudflap by default on non-GNU/Linux
	systems.
	* configure: Regenerated.

2004-07-08 John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	PR target/16344
	* Makefile.tpl (profiledbootstrap): Build runtime libraries with
	feedback based compiler.
	* Makefile.in: Rebuilt.

2004-07-05  Phil Edwards  <phil@codesourcery.com>

	* configure.in:  Do not prepend $srcdir to /dev/null in
	makefile fragments.
	* configure:  Regenerate.
2004-07-12 12:03:42 +00:00
Nick Clifton 0d72b1deac Undo accidental commit whilst adding crx-elf port 2004-07-07 17:37:19 +00:00
Nick Clifton 49e7d4dbb3 Add new port: crx-elf 2004-07-07 17:28:50 +00:00
Paolo Bonzini 2cb47d686e 2004-07-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (build_modules): Add bison, byacc, flex,
	m4, texinfo.
	(flags_to_pass): Add FLEX.
	* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
	(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
	(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
	DEFAULT_MAKEINFO): Remove.
	(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
	CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
	(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
	objdir or else use configured tool.
	(all-build): New.
	(all): Depend on it.
	(Build module dependencies): Add.
	* Makefile.in: Regenerate.
	* configure.in: Better support for multiple build modules,
	matching what is done for host/target modules.  Do not look
	for "plausible" locations of build tools if Canadian cross.
	Use autoconf's AC_PROG_CC to find a C compiler.  Define
	BUILD_DIR_PREFIX.  Look for flex, makeinfo and m4.
	* configure: Regenerate.
2004-07-02 07:56:07 +00:00
Christopher Faylor 10800ca5f5 * configure.in: Check for srcdir/winsup rather than build directory winsup.
* configure: Regenerate.
2004-06-22 01:38:35 +00:00
Corinna Vinschen 9f35b46456 Replace accidentally broken configure from previous regenerate. 2004-06-17 08:15:38 +00:00
Corinna Vinschen 99dbec4c6d * configure.in: Don't build Cygwin native newlib if winsup
directory is missing.  Emit warning instead.
	* configure: Regenerate.
2004-06-17 07:56:46 +00:00
Paolo Bonzini 21ff191e82 2004-06-09 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (touch-stage[+id+]): New.
	(restage[+prev+]): Depend on touch-stage[+id+].

	* Makefile.tpl (RECURSE_FLAGS_TO_PASS): New.
	Use it throughout.

	* Makefile.def: Add profile and feedback bootstrap stages.
	Remove next field from bootstrap stages.
	* Makefile.tpl (LN, LN_S): Substitute.
	(stageN-start, stageN-end): Use double-colon rules, to
	provide a hook for additional setup commands.
	(distclean-stageN-gcc, restageN): Create dependencies from
	[+prev+], not from [+next+].
	(stageN-bubble): Add commands for successive stages from
	[+prev+], using double-colon rules.
	(all-stageN-gcc): Fix typo.
	(stagefeedback-start, profiledbootstrap): New.
	* Makefile.in: Regenerate.
	* configure.in: Call ACX_PROG_LN.
	* configure: Regenerate.

config/ChangeLog:
2004-06-09  Paolo Bonzini  <bonzini@gnu.org>

	* acx.m4 (ACX_PROG_LN): From gcc, modified to
	accept a parameter.
2004-06-09 08:32:35 +00:00
Christopher Faylor aac4e7d40f * configure.in: Fix --enable-bootstrap breakage introduced in trees without
gcc.
* configure: Regenerate.
2004-06-03 04:57:38 +00:00
Paolo Bonzini 8e1cb52875 2004-06-01 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Remove new- prefix from toplevel
	bootstrap targets.
	* configure: Regenerate.
2004-06-01 07:54:42 +00:00
Paolo Bonzini e16662211d 2004-06-01 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (all.normal): Rename to all.
	(all): Replace with a rule to pick the default
	target from configure.
	(all-gcc, configure-gcc): Use conditionals to
	do nothing when toplevel bootstrap is going on.
	(GCC directory bootstrap) [gcc-bootstrap]: Disable.
	(Toplevel bootstrap) [gcc-no-bootstrap]: Disable.
	* configure.in: Support --enable-bootstrap.

	* Makefile.def: Remove new- prefix from toplevel
	bootstrap targets.
	* Makefile.tpl: Likewise.

	* Makefile.def: Add bootstrap_stage 4.  Add bootstrap2
	target.

	* Makefile.tpl (Toplevel bootstrap): Pass $(BASE_FLAGS_TO_PASS)
	$(RECURSE_FLAGS) to recursive invocation of make.

	* Makefile.in: Regenerate.
	* configure: Regenerate.
2004-06-01 07:42:22 +00:00
Daniel Jacobowitz 6d9402b467 * configure.in: Fix sed invocation for GFORTRAN_FOR_TARGET.
* configure: Regenerate.
2004-05-27 18:22:27 +00:00
Paolo Bonzini 352694210f 2005-05-24 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Test the ability to symlink directories.
	* configure: Regenerate.

	* Makefile.def (bootstrap-stage): New definitions.
	* Makefile.tpl (configure-stage1-gcc,
	configure-stage2-gcc, configure-stage3-gcc,
	all-stage1-gcc, all-stage2-gcc, all-stage3-gcc,
	new-bootstrap, new-cleanstrap, new-restage1, new-restage2,
	new-restage3, compare): Autogenerate, see Makefile.in
	entry for behavioral changes.
	(distclean-stage1, new-stage1-start, new-stage1-end,
	new-stage1-bubble, distclean-stage2, new-stage2-start,
	new-stage2-end, new-stage2-bubble, distclean-stage3,
	new-stage3-start, new-stage3-end): New autogenerated targets.
	(objext, prebootstrap, BOOT_CFLAGS,
	POSTSTAGE1_FLAGS_TO_PASS): Move above the autogenerated
	targets.

	* Makefile.in: Regenerate.
	(distclean-stage1, new-stage1-start, new-stage1-end,
	new-stage1-bubble, distclean-stage2, new-stage2-start,
	new-stage2-end, new-stage2-bubble, distclean-stage3,
	new-stage3-start, new-stage3-end): New targets.
	(all-stage1-gcc): Move prebootstrap dependency from here...
	(configure-stage1-gcc): ...to here.
	(new-bootstrap): Use bubble targets.
	(new-cleanstrap, new-restage1, new-restage2, new-restage3):
	Use per-stage distclean targets.
	(configure-stage1-gcc, configure-stage2-gcc,
	configure-stage3-gcc, all-stage1-gcc,
	all-stage2-gcc, all-stage3-gcc, new-bootstrap):
	Use new-stageN-start to prepare the tree.
2004-05-24 11:08:48 +00:00
Paolo Bonzini c580d51621 2004-05-23 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (host_modules): add libcpp.
	* Makefile.tpl: Add dependencies on and for libcpp.
	* Makefile.in: Regenerate.
	* configure.in: Add libcpp host module.
	* configure: Regenerate.

config/ChangeLog:

2004-05-23  Paolo Bonzini  <bonzini@gnu.org>

	* acx.m4 (ACX_HEADER_STDBOOL, ACX_HEADER_STRING):
	From gcc.
2004-05-24 10:45:14 +00:00
Paolo Bonzini a7e609d6a9 2004-05-21 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl: Whenever a recursive target is defined, wrap
	it in a special @if/@endif block, and prepare its maybe
	dependency in the @if/@endif block
	* configure.in: Instead of writing maybe dependencies, remove
	the @if/@endif statements, and remove the @if/@endif blocks
	that remain.
	* configure: Regenerate.
	* Makefile.in: Regenerate.
2004-05-21 19:08:54 +00:00
Zack Weinberg e5a32b9a96 * Makefile.def, Makefile.tpl, configure.in: Remove all mention
of libf2c.
	* configure, Makefile.in: Regenerate.
2004-05-18 02:00:58 +00:00
DJ Delorie cb2333e85e merge from gcc 2004-05-13 18:14:28 +00:00
DJ Delorie 866c244e59 merge from gcc:
2004-04-27  Paolo Bonzini  <bonzini@gnu.org>

	Revert:
	2004-04-26  Paolo Bonzini  <bonzini@gnu.org>

	* Makefile.def (flags_to_pass): Remove *dir variables that
	are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
	as well as prefix and exec_prefix.
	* Makefile.in: Regenerate.

2004-04-26  Paolo Bonzini  <bonzini@gnu.org>

	* Makefile.def (host_modules): Mark with the bootstrap
	flag packages on which gcc depends.
	* Makefile.tpl (all-bootstrap): Use it.
	* Makefile.in: Regenerate.

2004-04-26  Paolo Bonzini  <bonzini@gnu.org>

	* Makefile.def (flags_to_pass): Remove *dir variables that
	are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
	as well as prefix and exec_prefix.
	* Makefile.in: Regenerate.

2004-04-26  Paolo Bonzini  <bonzini@gnu.org>

        * configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
        * configure: Regenerate.
        * config/acx.m4: Mutuate ACX_PROG_CMP_IGNORE_INITIAL from gcc.
        * gcc/Makefile.tpl (compare): Use the result of the test.
        * gcc/Makefile.in: Regenerate.

2004-04-23  Paolo Bonzini  <bonzini@gnu.org>

	* Makefile.tpl (all-stage1-gcc, all-stage2-gcc, all-stage3-gcc):
	Always relocate gcc and prev-gcc to the original names, even
	if the build fails.
	(new-cleanstrap, new-restage1, new-restage2, new-restage3):
	New targets.
2004-04-27 18:25:01 +00:00
Rainer Orth b9618d1eee * configure.in (mips*-*-irix5*): Enable ld.
* configure: Regenerate.
2004-04-19 15:38:50 +00:00
Nathanael Nerode ef76efc6db 2004-04-09 Nathanael Nerode <neroden@gcc.gnu.org>
PR bootstrap/14871
	* Makefile.tpl: If we don't have built-in-tree target tools,
	use the ones found by configure rather than hacking around with
	program_transform_name.
	* configure.in: Give Makefile.tpl the information necessary
	to do that.
	* Makefile.in: Regenerate.
	* configure: Regenerate.

2004-04-06  Nathanael Nerode  <neroden@gcc.gnu.org>

	PR bootstrap/14760
	* configure.in: When computing baseargs, strip *all* copies of
	offending options.  Also, don't match/substitute the trailing space,
	so that this actually works when two similar options are separated by
	only one space.
	* configure: Regenerate.

2004-04-06  David Edelsohn  <edelsohn@gnu.org>

        * configure.in (powerpc-*-aix*): Remove target-libada from noconfigdirs.
        (rs6000-*-aix*): Same.
        * configure: Regenerate.
2004-04-09 05:17:48 +00:00
Nathanael Nerode f06f3d7c4d * configure.in (top level bootstrap support): Rework --enable-werror
to set @stage2_werror_flag@.
	* configure: Regenerate.
	* Makefile.tpl (top level bootstrap support): Pass
	@stage2_werror_flag@ down to configure in stages 2 and 3.
	* Makefile.in: Regenerate.
2004-03-24 22:34:31 +00:00
Nathanael Nerode 8ec98d6c38 * Makefile.tpl: Rearrange by moving recursive_targets rules
into their proper sections.
	* Makefile.tpl (top level bootstrap support): Move disabling
	of coverage flags from 'make' to 'configure'; improve comments.
	* Makefile.in: Regenerate.

	* Makefile.tpl (experimental top level bootstrap) Move stage1
	language setting from all- target to configure- target; disable
	intermodule optimization in stage 1; prevent gratuitous rebuilds
	of stage 1.
	* Makefile.in: Regenerate.
	* configure.in: Comma-separate stage 1 language list for top
	level bootstrap.
	* configure: Regenerate.

	* Makefile.tpl: Clean up experimental top level bootstrap support:
	note known problems; set CONFIG_SHELL; don't set BUILD_CC; relocate
	prev-gcc in configure- targets as well as all- targets.
	* Makefile.in: Regenerate.
2004-03-22 11:59:20 +00:00
Nathanael Nerode f600e87caf 2004-03-17 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Remove symbolic link section.
	* configure: Regenerate.
	* Makefile.tpl (links): Remove.
	* Makefile.in: Regenerate.
2004-03-17 19:26:07 +00:00
Nathanael Nerode 4a95a7fe4a 2004-03-15 Paolo Bonzini <bonzini@gnu.org>
Nathanael Nerode  <neroden@gcc.gnu.org>

	* configure.in (DEFAULT_YACC, DEFAULT_M4, DEFAULT_LEX):
        Set with AC_CHECK_PROGS.
	* configure.in: Fix comment typo from last patch.
	* configure: Regenerate.
2004-03-16 22:21:55 +00:00
Nathanael Nerode 457eaf16aa 2004-03-15 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.tpl: Introduce experimental top level bootstrap support.
	* Makefile.in: Regenerate.
	* configure.in: Introduce support for top level bootstrap.
	* configure: Regenerate.
2004-03-16 00:04:59 +00:00
Nathanael Nerode 2e93c97146 2004-03-12 Eric Botcazou <ebotcazou@gcc.gnu.org>
Paolo Bonzini  <bonzini@gnu.org>

	PR bootstrap/14522
	* configure.in: Cope with shells that do not support unquoted ^
	* configure: Regenerate.
2004-03-13 05:54:47 +00:00
DJ Delorie 967641f2aa 2004-03-11 Eric Botcazou <ebotcazou@gcc.gnu.org>
Paolo Bonzini  <bonzini@gnu.org>

	PR bootstrap/14522
	* configure.in: Cope with shell that do not support nesting
	quotes inside quoted backquote substitutions.
	* configure: Regenerate.

2004-03-10  Andrew Pinski  <pinskia@physics.uc.edu>

	PR bootstrap/14522
	* configure.in: Fix escaping of $.
	* configure: Regenerate.
2004-03-11 18:30:52 +00:00
Nathanael Nerode cfc26d93b5 (top level)
2004-03-11  Nathanael Nerode  <neroden@gcc.gnu.org>

	* configure: Regenerate.

2004-03-08  Paolo Bonzini  <bonzini@gnu.org>

	PR ada/14131
	Move language detection to the top level.
	* configure.in: Find default values for the tools as
	soon as possible.  Disable ada if GNAT is not found.
	Emit error message about missing languages.  Expand
	--enable-languages=all for the gcc subdirectory.

(config)
2004-03-08  Paolo Bonzini  <bonzini@gnu.org>

	PR ada/14131
	Move language detection to the top level.
	* acx.m4 (ACX_PROG_GNAT): New macro, moved here
	from the gcc subdirectory.

2004-03-09  Hans-Peter Nilsson  <hp@axis.com>

	* accross.m4 (AC_C_BIGENDIAN_CROSS): Compile endian probe with
	"-c".  Properly quote parameter for AC_MSG_ERROR.
2004-03-11 05:15:36 +00:00
Richard Sandiford 5bbdae8f39 * configure.in (mips64*-*-linux*): Override mips*-*-linux* case
and disable libgcj.
	* configure: Regenerated.
2004-03-01 19:34:14 +00:00
DJ Delorie 6c6a052230 * configure.in (powerpc-*-aix*): Add target-libada to noconfigdirs.
(rs6000-*-aix*): Same.
* configure: Regenerate.
2004-02-11 17:52:06 +00:00
DJ Delorie b18ee8a2a6 * configure.in (host): Add in missing $noconfigdirs to defines.
* configure: Regenerate.
2004-02-11 17:50:38 +00:00
DJ Delorie d832a288e5 2004-02-10 Arnaud Charlet <charlet@act-europe.fr>,
Nathanael Nerode  <neroden@gcc.gnu.org>
PR ada/6637, PR ada/5911
Merge with libada-branch:
* configure.in, Makefile.tpl, Makefile.def: Add target-libada,
with appropriate dependencies. Add --enable-libada configure switch.
* configure, Makefile.in: Regenerate.
2004-02-10 17:57:02 +00:00
DJ Delorie 4ea8488c70 2004-02-05 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
* configure.in: Don't pass --with-stabs on IRIX 5 either.
* configure: Regenerate.
2004-02-06 00:50:48 +00:00
Nathanael Nerode 1d1abb620d * configure.in: Use ./config.cache, not config.cache.
* configure: Regenerate.
	* Makefile.tpl: Special-casing not needed for GCC any more.
	* Makefile.in: Regenerate.
2004-01-05 04:38:54 +00:00
Nathanael Nerode 68c6d8acfc * configure.in: Don't share a cache file for host dirs.
* configure: Regenerate.
2004-01-05 00:50:42 +00:00
Nathanael Nerode 5b28b6ef34 PR bootstrap/11932, PR bootstrap/11933
(I don't know if it will fix either of them, but it relates
	to them.)
	* configure.in: Don't use shared config.cache for target
	directories.
	* configure: Regenerate.
2004-01-03 18:24:38 +00:00
DJ Delorie c8cbb48c30 * configure.in (ia64*-*-hpux*): Disable building java libraries.
* configure: Regenerated.
2004-01-01 00:07:51 +00:00
DJ Delorie 1fb9256d7e * configure.in (*-*-uclinux): Exclude newlib, libgloss and rda.
* configure: Regenerated.
2003-12-22 00:59:55 +00:00
Thomas Fitzsimmons 8e5f3482bc 2003-12-08 Thomas Fitzsimmons <fitzsim@redhat.com>
* configure.in (raw_libstdcxx_flags): Remove the leading space.
	* configure: Regenerate.
2003-12-08 21:19:41 +00:00
DJ Delorie 4883801c0f * configure.in (*-*-vxworks): Add target-libiberty to noconfdirs.
* configure:  Regenerate.
2003-10-20 21:53:45 +00:00
DJ Delorie e9ea9dec2c 2003-10-05 Mohan Embar <gnustuff@thisiscool.com>
* configure.in: Allow explicit specification of CFLAGS_FOR_BUILD.
* configure: Rebuilt
* Makefile.tpl: Use CFLAGS_FOR_BUILD computed by configure
* Makefile.in: Rebuilt
2003-10-08 21:29:04 +00:00
Daniel Jacobowitz eedd1e14ab * configure.in: Pass a computed --program-transform-name
to subconfigures.
	* configure: Regenerated.
2003-09-21 19:31:18 +00:00
Daniel Jacobowitz 1de0716442 * configure.in (TOPLEVEL_CONFIGURE_ARGUMENTS, baseargs): Fix
quoting.
	* configure: Regenerated.
2003-09-17 20:03:04 +00:00
DJ Delorie 3833944e68 * configure: Regenerate. 2003-09-04 22:53:35 +00:00
DJ Delorie 8a315f6a89 * configure.in: Ensure arguments to sed are properly spaced.
* configure: Regenerate.
2003-09-02 23:21:43 +00:00
Daniel Jacobowitz cc9f0cf0af * configure.in: Set RAW_CXX_FOR_TARGET if unset.
* configure: Regenerated.
2003-08-27 21:17:54 +00:00
Nathanael Nerode 78bcc6ada4 Merge bugfix from GCC:
2003-08-23  Phil Edwards  <pme@gcc.gnu.org>

	* configure.in:  Use newline instead of semicolon when assuming
	shell arguments in a for loop.
	* configure:  Regenerated.
2003-08-27 03:05:51 +00:00
Geoffrey Keating c5a12ca3b9 Index: ChangeLog
2003-08-20  Geoffrey Keating  <geoffk@apple.com>

	PR 8180
	* configure.in: When testing with_libs and with_headers, treat
	'no' as unset.  Based on a patch by Dan Kegel <dank@kegel.com>.
	* configure: Regenerate.

Index: gcc/ChangeLog
2003-08-20  Geoffrey Keating  <geoffk@apple.com>

	PR 8180
	* configure.in: When testing with_libs and with_headers, treat
	'no' as unset.  Based on a patch by Dan Kegel <dank@kegel.com>.
	* configure: Regenerate.
2003-08-22 17:05:58 +00:00
Geoffrey Keating d41ac477ee Merge configure.in, configure with GCC. 2003-08-21 02:21:21 +00:00
Geoffrey Keating 4b649dd933 * configure.in: Disable libgcj for darwin not on powerpc.
* configure: Rebuild.
2003-08-20 00:51:25 +00:00
Andrew Cagney e48c382f84 2003-08-01 Andrew Cagney <cagney@redhat.com>
* configure.in (noconfigdirs): Do not add GDB when m32r-*-*.
	* configure: Ditto.
2003-08-01 21:35:02 +00:00
DJ Delorie a16d51edf6 * configure.in: Enable libgcj for darwin.
* configure: Rebuild.
2003-07-30 20:12:58 +00:00
Nathanael Nerode df4b5a9c5a * Makefile.tpl: Use 'mkinstalldirs' rather than 'mkdir' when
creating target and build subdirs to build all parent dirs as needed.
	* Makefile.in: Rebuild.
	* configure.in: Don't build dirs explicitly here.
	* configure: Rebuild.
2003-07-28 03:27:46 +00:00
Nathanael Nerode 282c0e4790 * Makefile.tpl: Set INSTALL and friends using autoconf. Remove
unused INSTALL_PROGRAM_ARGS.
	* configure.in: Use AC_PROG_INSTALL.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
2003-07-13 20:49:42 +00:00
Alexandre Oliva 24431cf0ec * configure: Rebuilt.
2001-09-26  Alexandre Oliva  <aoliva@redhat.com>
* configure.in (noconfigdirs) [am33_2.0-*-linux*]: Don't build
newlib nor libgloss.
Wed May  9 10:07:19 2001  Alexandre Oliva  <aoliva@redhat.com>
* configure.in (am33_2.0-*-linux*): Added.
2003-07-10 05:04:25 +00:00
Bob Wilson b30e072171 * configure.in: Add ${libgcj} to noconfigdirs for xtensa-*-* targets.
* configure: Regenerate.
2003-07-10 05:00:47 +00:00
Nathanael Nerode 8a7cd7e5f9 * configure.in: Clean up config-lang.in handling. Delete
useless assignment to "subdirs".
	* configure: Regenerate.
2003-06-27 17:34:33 +00:00
Nathanael Nerode 5283b6437d * configure.in: Rename 'target_libs' to 'target_libraries'.
Remove useless reference to 'target_libs'.
	* configure: Regenerate.
2003-06-26 20:19:41 +00:00
Hans-Peter Nilsson 7e2691250b * configure.in (noconfigdirs) <cris-*-*>: Disable target-newlib
and target-libgloss.
	<d30v-*-*, fr30-*-*, i960-*-*, m32r-*-*>: Disable gdb.
	<h8300*-*-*>: Disable libf2c and ${libgcj}.
2003-06-23 00:40:23 +00:00
DJ Delorie 8ae9ab67f6 * configure.in: Update testsuite_flags to new location.
* configure. Regenerate.
2003-06-18 02:25:31 +00:00
DJ Delorie 7f74e6a363 Merge these:
2003-06-11  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>

	* configure.in: Don't pass --with-stabs for mips*-sgi-irix6*o32.
	* configure. Regenerate.

2003-06-10  Nathanael Nerode  <neroden@gcc.gnu.org>

	* configure.in: Disable serial configure by default.
	* configure: Regenerate.
	* Makefile.tpl: Abolish .NOTPARALLEL.
	* Makefile.in: Regenerate.
2003-06-12 16:06:52 +00:00
Nathanael Nerode 657b58f4aa * Makefile.tpl: Make 'recursive targets' using autogen rather
than shell loop.  Remove duplicate 'clean' targets and false
	comments.
	* Makefile.def: Add systematic dependencies to 'recursive' targets.
	Add systematic method of specifying missing targets in subdirs.
	Add copyright boilerplate.
	* Makefile.in: Regenerate.
	* configure.in: Add 'recursive targets' to maybe list.
	* configure: Regenerate.
2003-06-03 20:44:31 +00:00
DJ Delorie 733ae29980 * configure.in: Use curly braces in the definition of tooldir.
* configure: Regenerate.
2003-05-22 02:47:53 +00:00
Nathanael Nerode 70ffc14893 2003-05-19 Nathanael Nerode <neroden@gcc.gnu.org>
* configure.in: Switch more things to use maybe dependencies.
	* Makefile.tpl: Switch more things to use maybe dependencies.
	Factor out common code from autogen IF statements.
	* configure: Regenerate.
	* Makefile.in: Regenerate.
2003-05-20 01:05:39 +00:00
DJ Delorie 08049c016e * configure.in: Accept i[3456789]86 for machine type.
* configure: Regenerate.
2003-05-19 18:12:19 +00:00
Nathanael Nerode 9b52096310 <top level>
* configure.in: Switch more things to use maybe dependencies.
	Rearrange a little.  Use GCC_TOPLEV_SUBDIRS.
	* configure: Regenerate.
	* Makefile.tpl: Switch more things to use maybe dependencies.
	* Makefile.in: Regenerate.

<config>
	* config/acx.m4: Introduce _GCC_TOPLEV_NONCANONICAL_BUILD,
	_GCC_TOPLEV_NONCANOICAL_HOST, _GCC_TOPLEV_NONCANONICAL_TARGET,
	GCC_TOPLEV_SUBDIRS.
2003-05-18 15:49:06 +00:00
Andreas Jaeger 939f2fb63d Recreate correctly. 2003-05-13 14:18:04 +00:00
Andreas Jaeger 878e4ecbe8 2003-05-13 Michael Eager <eager@mvista.com>
* configure.in: Correct sed script so that options in quotes are not
	deleted.
	* configure: Rebuild.
2003-05-13 06:34:57 +00:00
Corinna Vinschen a8833ac1ff * configure.in (FLAGS_FOR_TARGET): Remove $$s/newlib/libc/sys/cygwin
and $$s/newlib/libc/sys/cygwin32 include paths.
	* configure: Ditto.
2003-05-12 13:59:17 +00:00
DJ Delorie 8997bae831 * Makefile.tpl (MAKEINFOFLAGS): Default to --split-size=5000000.
* Makefile.in: Regenerate.

* configure.in (powerpc64*-*-linux*): Remove.
* configure: Rebuilt.
2003-04-19 00:19:40 +00:00
DJ Delorie 09f7abda72 * Makefile.tpl (GCC_STRAP_TARGETS): New variable containing all the
previous bootstrap targets, plus bubblestrap, quickstrap, cleanstrap,
and restrap.
* Makefile.in:  Regenerate.

* configure.in (arm-*-netbsdelf*): Enable building java libraries.
* configure: Regenerated.
2003-04-17 21:30:52 +00:00
Nathanael Nerode ac2edfb863 * Makefile.tpl: Move .NOEXPORT, MAKEOVERRIDES up. Delete unused
Make macro.
	* Makefile.in: Regenerate.
	* configure.in: Clean up gxx_include_dir logic.
	* configure: Regenerate.
2003-03-12 20:47:07 +00:00
DJ Delorie 06d58fc081 * configure.in (gxx_include_dir): Fix typo.
* configure: Regenerated.
2003-03-09 18:43:06 +00:00
Nathanael Nerode 2245eb63ea 2003-03-04 Daniel Jacobowitz <drow@mvista.com>
* configure.in: Include $(build_tooldir)/sys-include in
	FLAGS_FOR_TARGET.
	* configure: Regenerated.

2003-03-04  Nathanael Nerode  <neroden@gcc.gnu.org>

	* Makefile.tpl: Reindent.
	* Makefile.in: Regenerate.
	* configure.in: Reindent.  Don't set unused variables.
	* configure: Regenerate.
2003-03-05 01:50:53 +00:00
Nathanael Nerode 76ab491adb * Makefile.tpl: Always pass down RANLIB.
* Makefile.in: Regenerate.

	* Makefile.tpl: Don't set unused enable_shared, enable_threads macros.
	* Makefile.in: Regenerate.
	* configure.in: Remove unused logic relating to --enable-shared
	and --enable-threads.  Remove bogus comments.  Remove redundant
	noconfigdirs.
	* configure: Regenerate.

	* configure.in: Replace ${libstdcxx_version} by its value.
	Remove reference to mh-dgux.
	* configure: Regenerate.
2003-03-04 07:48:06 +00:00
Nick Clifton c8926a2b8d Remove site-file support - it is obsolete. 2003-02-25 10:47:07 +00:00
Nick Clifton 5cd57f01c3 Add support for kaOS as cross build target system. 2003-02-24 16:47:04 +00:00
Alexandre Oliva 51dcf2858d * configure.in: Introduce --enable-maintainer-mode.
* configure: Rebuilt.
* Makefile.tpl (Makefile.in, configure): Enable dependencies only
for maintainer mode.
* Makefile.in: Rebuilt.
2003-02-19 23:51:03 +00:00
Andrew Cagney 487bbc62fd 2003-02-19 Andrew Cagney <ac131313@redhat.com>
* configure: Regenerate using autoconf 2.13.
2003-02-19 23:32:19 +00:00
Andrew Cagney a0c9299636 Re-generate using autoconf 000227. 2003-02-17 17:14:16 +00:00