declaration that should have been static.
* thread.cc (verifyable_object_state verifyable_object_isvalid): Make inline
static.
(pthread*::is_good_object): Move to directly after verifyable_object_state
verifyable_object_isvalid and make inline.
everywhere. Leave some thread.cc stuff alone for now.
* cygtls.h: Kludge some definitions to avoid including a problematic windows
header.
(_cygtls::_myfault): New entry.
(_cygtls::_myfault_errno): Ditto.
(_cygtls::fault_guarded): New function.
(_cygtls::setup_fault): Ditto.
(_cygtls::return_from_fault): Ditto.
(_cygtls::clear_fault): Ditto.
(myfault): New class.
* exceptions.cc (handle_exceptions): Handle case of guarded fault in system
routine.
* gendef: Add another entry point for setjmp that the compiler doesn't know
about and won't complain about.
* gentls_offsets: Just include windows.h rather than kludging a HANDLE def.
* miscfuncs.cc (check_null_str): Delete.
(check_null_empty_str): Ditto.
(check_null_empty_str_errno): Ditto.
(check_null_str_errno): Ditto.
(__check_null_invalid_struct): Ditto.
(__check_null_invalid_struct_errno): Ditto.
(__check_invalid_read_ptr): Ditto.
(__check_invalid_read_ptr_errno): Ditto.
(dummytest): New function.
(check_iovec_for_read): Delete.
(chec_iovec): Rename from check_iovec_for_write. Take a read/write parameter.
* tlsoffsets.h: Regenerate.
* winsup.h: Remove check_* declarations.
(check_iovec_for_read): Delete declaration. Turn into a define instead.
(check_iovec_for_write): Ditto.
(check_iovec): New declaration.
* thread.h: Use ifdef guard name consistent with other header files.
Revert PTHREAD_MUTEX_INITIALIZER to PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP
since that is actually closer to what linux does.
* thread.h (cw_cancel_action): New enum.
(cancelable_wait): Use cw_cancel_action as third argument.
* thread.cc (cancelable_wait): Ditto. Don't wait for cancel if cancel_action
== cw_no_cancel.
(pthread::create): Don't wait for cancel event since that is racy.
(pthread_mutex::pthread_mutex): Set default to PTHREAD_MUTEX_ERRORCHECK.
(pthread_mutexattr::pthread_mutexattr): Ditto.
(pthread_mutex::_lock): Tell cancelable_wait not to wait for cancellation
event.
(semaphore::_timedwait): Accommodate change in cancelable_wait args.
(pthread::join): Ditto.
(_local_storage::setmode_mode): New element.
* tlsoffsets.h: Regenerate.
* cygwin.din (setmode): Define as cygwin_getmode.
* syscalls.cc (setmode_helper): Use setmode_* variables from tls rather than
using unthreadsafe static.
(setmode): Break out fwalk stuff.
(cygwin_setmode): New function. Put fwalk stdio stuff here.
* thread.h (cw_sig_wait): New enum.
(fast_mutex::lock): Use cancelable_wait with resumable signal.
(cancelable_wait): Change fourth argument to cw_sig_wait enum.
* thread.cc (cancelable_wait): Ditto. Loop on signal detection if fourth
argument == cw_sig_resume.
indicate that it is "special".
* thread.cc (pthread::exit): If __sdidinit is < 0, it was never really
initialized so reset it to 0 before calling _reclaim_reent.
* fhandler.h (fhandler_fifo::get_io_handle): New fifo-specific method.
* fhandler_fifo.cc (fhandler_fifo::close): Close output_handle only if it is
open.
(fhandler_fifo::open_not_mine): Reorganize slightly. Don't call _pinfo methods
when the fifo is owned by me or suffer dtable lock_cs deadlock.
(fhandler_fifo::open): Call open_not_mine first, otherwise open myself
(racy).
* pinfo.cc (_pinfo::commune_recv): Duplicate fifo handles here in requesting
processes arena to avoid one potential race (of many).
(_pinfo::commune_send): Move all PICOM_FIFO code under one case statement.
* thread.cc (pthread::init_mainthread) Use existing hMainProc handle rather
than calling GetCurrentProcess.
rather than creating a suspended thread. Wait for "cancellation event" to
indicate that started thread has been properly initialized.
(pthread::thread_init_wrapper): Use set_tls_self_pointer() to set tid and
cygtls. Signal with cancel_event when done.
(pthread::set_tls_self_pointer): New static function.
* thread.cc (MTinterface::fixup_after_fork): Change call to
pthread::init_mainthread.
(pthread::init_mainthread): Remove parameter forked. Simplify thread self
pointer handling.
(pthread::self): Set thread self pointer to null_pthread if thread has not been
initialized.
(pthread::set_tls_self_pointer): New static function.
default to false..
* thread.cc (MTinterface::fixup_after_fork): Call pthread::init_mainthread with
forked = true.
(pthread::init_mainthread): Add parameter forked. Do not change thread self
pointer when forked.
New define.
(PTHREAD_NORMAL_MUTEX_INITIALIZER_NP): Ditto.
(PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP): Ditto.
* thread.cc (pthread_mutex::is_good_initializer):
Check for all posssible initializers
(pthread_mutex::is_good_initializer_or_object): Ditto.
(pthread_mutex::is_good_initializer_or_bad_object): Ditto.
(verifyable_object_isvalid): Support up to three static
initializers.
(verifyable_object_isvalid (void const *,long)): Remove.
(pthread_cond::is_good_initializer_or_bad_object): Remove
unneeded objectState var.
(pthread_cond::init): Condition remains unchanged when creation
has failed.
(pthread_rwlock::is_good_initializer_or_bad_object): Remove
unneeded objectState var.
(pthread_rwlock::init): Rwlock remains unchanged when creation
has failed.
(pthread_mutex::init): Remove obsolete comment.
Mutex remains unchanged when creation has failed. Add support
for new initializers.
(pthread_mutex_getprioceiling): Do not create mutex,
just return ENOSYS.
(pthread_mutex_lock): Simplify.
(pthread_mutex_trylock): Remove unneeded local themutex.
(pthread_mutex_unlock): Just return EPERM if mutex is not
initialized.
(pthread_mutex_setprioceiling): Do not create mutex,
just return ENOSYS.
* thread.h (verifyable_object_isvalid): Support up to three
static initializers.
(verifyable_object_isvalid (void const *,long)): Remove
prototype.
(pthread_mutex::init): Add optional initializer to parameter
list.
to force signal to be handled. Zero event here to prevent races.
* signal.cc (sigwaitinfo): Use local handle value for everything since signal
thread could zero event element at any time. Detect when awaking due to thread
not in mask and set return value and errno accordingly. Don't set signal
number to zero unless we've recognized the signal.
* sigproc.cc (sigq): Rename from sigqueue throughout.
* thread.cc (pthread::join): Handle signals received while waiting for thread
to terminate.
* cygwin.din: Export sighold, sigqueue.
* exceptions.cc (sighold): Define new function.
* signal.cc (handle_sigprocmask): Set correct errno for invalid signal.
Simplify debugging output.
(sigqueue): Define new function.
* include/cygwin/signal.h (sighold): Declare new function.
(sigqueue): Ditto.
* include/cygwin/version.h: Bump API minor version number.
* include/limits.h (TIMER_MAX): Define.
(_POSIX_TIMER_MAX): Ditto.
Add do_sig_wait parameter. Wait for signal_arrived if set to true.
Return WAIT_SIGNALED if signal arrived.
(pthread_cond::wait): Accomodate change to pthread::cancelable_wait.
(pthread::join): Ditto.
(semaphore::_timedwait): Ditto.
(semaphore::_wait): Ditto. Change to return int to allow status
feedback.
(semaphore::wait): Return return value from semaphore::_wait.
* thread.h (WAIT_SIGNALED): New definition.
(pthread::cancelable_wait): Change declaration. Define do_sig_wait
as false by default to not interfere with existing calls accidentally.
(semaphore::_wait): Declare int.
* cygwin.din: Make clock SIGFE. Add clock_gettime, sigwaitinfo, timer_create,
timer_delete, timer_settime.
* include/cygwin/version.h: Reflect above additions.
* fork.cc (fork_child): Call fixup_timers_after_fork.
* signal.cc (sigwait): Remove unused variable.
* timer.cc: New file.
(clock_gettime): Define new function.
(timer_tracker): Define new struct used by timer functions.
(timer_tracker::timer_tracker): New function.
(to_us): New function.
(timer_thread): New function.
(timer_tracker::settime): New function.
(timer_create): New function.
(timer_settime): New function.
(timer_delete): New function.
(fixup_timers_after_fork): New function.
* cygthread.cc: Bump thread count.
* signal.cc (sigwaitinfo): Define new function.
(sigwait): Redefine based on sigwaitinfo.
* include/cygwin/signal.h (sigwaitinfo): Declare.
(sigwait): Ditto.
* dtable.cc (dtable::vfork_parent_restore): Avoid double close of ctty when
ctty == ctty_on_hold.
* cygtls.h (_threadinfo::threadkill): New element.
(_threadinfo::set_threadkill): Declare new function.
(_threadinfo::reset_threadkill): Declare new function.
* dcrt0.cc (dcrt0_1): Call here so that it will be possible to attach to
running process with #(*& Windows Me/9x.
(initial_env): Try to initialize strace if uninitialized.
* gendef: Don't zero signal if threadkill is set since that will happen in the
called function.
* signal.cc (sigwait): Ensure cleanup in error conditions.
* sigproc.cc (sig_send): Clear packet mask storage.
(wait_subproc): Fill in child exit code in siginfo_t structure.
* thread.cc (pthread_kill): Set threadkill flag.
* tlsoffsets.h: Regenerate. Throughout, use siginfo_t to fill out all signal
information for "kernel" signals.
* cygtls.h (_threadinfo::set_siginfo): Declare new function.
* cygtls.cc (_threadinfo::set_siginfo): Define new function.
* dcrt0.cc (do_exit): Accommodate siginfo_t considerations.
* exceptions.cc (handle_exceptions): Ditto.
(sig_handle_tty_stop): Ditto.
(ctrl_c_handler): Use killsys() to send signal.
(sigpacket::process): Rename from sig_handle. Use siginfo_t field from
sigpacket for everything.
(tty_min::kill_pgrp): Accommodate siginfo_t considerations.
(fhandler_termios::bg_check): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::ioctl): Use killsys() to send signal.
* signal.cc (kill_worker): Rewrite to use siginfo_t second argument.
(kill_pgrp): Ditto.
(kill0): Define new function pulled from kill().
(kill): Rewrite as frontend to kill0.
(killsys): Define new function.
* sigproc.cc (sigelem): Eliminate.
(sigpacket): Move to sigproc.h. Subsume sigelem.
(pending_signals): Use sigpacket rather than sigelem for everything.
(sig_clear): Ditto.
(wait_sig): Ditto.
(sig_send): Rewrite to use siginfo_t argument.
(sig_send): New function wratpper to sig_send with siginfo_t argument.
(wait_subproc): Accommodate siginfo_t considerations.
* thread.cc (pthread_kill): Ditto.
* sigproc.h (sigpacket): Move here.
(sigpacket::process): Declare "new" function.
(sig_handle): Eliminate declaration.
(sig_send): Declare with new paramaters.
(killsys): Declare new function.
(kill_pgrp): Declare.
* winsup.h: Move some signal-specific stuff to sigproc.h.
* include/cygwin/signal.h: Tweak some siginfo_t stuff.
compiler bug.
* autoload.cc (TryEnterCriticalSection): Remove.
* dcrt0.cc (dll_crt0_0): Delete inappropriate setting of _my_tls.stackptr to
NULL since it has really bad consequences. Make 'si' an automatic variable.
* cygtls.cc (_threadinfo::init_thread): Correct thinko which caused thread list
to be allocated every time.
* cygtls.h (CYGTLS_PADSIZE): Define as const int.
* sync.h: Make multiple inclusion safe.
(muto::next): Eliminate.
(muto::exiting_thread): New variable.
(muto::set_exiting_thread): New function.
(new_muto): Change to use different section for mutos since c++ give
inexplicable warning in some cases otherwise.
(new_muto1): Ditto.
* dcrt0.cc (do_exit): Call muto::set_exiting_thread here.
* sync.cc (muto_start): Eliminate.
(muto::acquire): Always give exiting thread a lock. Never give thread a lock
if exiting.
(muto::release): Ditto for releasing.
* dtable.cc (dtable::init_lock): Unline function and define here.
* dtable.h (lock_cs): Define as a muto since critical sections seem to work
oddly on Windows Me.
(lock): Accommodate switch to muto.
(unlock): Ditto.
* exceptions.cc (setup_handler): Don't worry about acquiring mutos since that
hasn't mattered for a long time.
(signal_exit): Ditto: muto stuff will be handled automatically on exit now.
* Makefile.in (DLL_IMPORTS): Link advapi32 to ensure proper DLL initialization.
* autoload.cc (RegCloseKey): Arbitrarily choose this function as a "seed" to
pull the advapi32 link library in. So, comment out the autoloading.
* cygtls.cc (_threadinfo::init_thread): Just clear CYGTLS_PADSIZE.
(_threadinfo::remove): Add debugging.
(_threadinfo::find_tls): Ditto.
* cygtls.h (_threadinfo::padding): Make zero length (for now?).
* dcrt0.cc (dll_crt0_0): Move more initialization here from dll_crt0_1.
(dll_crt0_1): See above.
* dtable.h (dtable::lock): Remove commented out critical section locking.
* dtable.h (dtable::init_lock): Remove commented out critical section locking.
* dtable.h (dtable::unlock): Remove commented out critical section locking.
* exceptions.cc (interruptible): bool'ize.
* init.cc (threadfunc_fe): Revert to storing threadfunc at stack bottom.
(munge_threadfunc): Ditto. Avoid adding overhead to calibration_thread.
(prime_threads): Don't initialize tls stuff.
(dll_entry): Make minor change to initialization order.
* tlsoffsets.h: Regenerate.
* sigproc.cc (wait_sig): Add sanity check for end of process thread exit.
* select.h: Make minor formatting change.
* Makefile.in: Add still more -fomit-frame-pointer functions.
* dtable.h (dtable::lock): New function.
(dtable::unlock): New function.
(dtable::init_lock): New function.
* cygheap.h (HEAP_TLS): Declare new enum value.
(init_cygheap::threadlist): Declare new array.
(init_cygheap::sthreads): Declare new variable.
(cygheap_fdmanip::~cygheap_fdmanip): Use new dtable lock/unlock functions.
(cygheap_fdnew::cygheap_fdnew): Ditto.
(cygheap_fdget::cygheap_fdget): Ditto.
* dtable.cc (dtable_init): Initialize fdtab critical section.
(dtable::fixup_after_fork): Ditto.
(dtable::fixup_after_exec): Ditto.
(dtable::dup2): Use lock/unlock calls to protect access to fdtab.
(dtable::find_fifo): Ditto.
(dtable::fixup_before_fork): Ditto.
(dtable::fixup_before_exec): Ditto.
(dtable::set_file_pointers_for_exec): Ditto.
(dtable::vfork_child_dup): Ditto.
(dtable::vfork_parent_restore): Ditto.
* syscalls.cc (close_all_files): Ditto.
* sync.h (muto::acquired): Declare new function.
(new_muto1): Declare new macro used to specify name of muto storage.
* sync.cc (muto::acquired): Define new function.
* cygthread.cc (cygthread::stub): Remove signal chain removal call since it is
handled during initialization now.
* cygthread.cc (cygthread::simplestub): Remove signal chain removal call since
it is handled during initialization now.
* cygtls.cc (sentry): New class used for locking. Use throughout.
(_threadinfo::reset_exception): Don't pop stack.
(_threadinfo::find_tls): Move from exceptions.cc.
(_threadinfo::init_thread): Initialize array of threads rather than linked
list. Take second argument indicating thread function for this thread.
(_threadinfo::remove): Search thread array rather than linked list. Use sentry
to lock. Only unlock if we got the lock.
(_threadinfo::find_tls): Ditto for first two.
(handle_threadlist_exception): Handle exceptions when manipulating the thread
list in case of premature thread termination.
(_threadinfo::init_threadlist_exceptions): Ditto.
* cygtls.h (TLS_STACK_SIZE): Decrease size.
(_threadinfo::padding): Add element to avoid overwriting lower part of stack.
(_threadinfo::remove): Add a "wait" argument to control how long we wait for a
lock before removing.
* exceptions.cc (init_exception_handler): Make global. Take argument to
control exception handler being set.
(ctrl_c_handler): Wait forever when removing self from signal chain.
(_threadinfo::find_tls): Move to cygtls.cc.
(sig_handle): Reorganize detection for thread-specific signals.
* heap.cc (heap_init): Rework slightly. Make fatal error more verbose. Remove
malloc initialization since it can't happen during dll attach.
* init.cc (search_for): Move address to search for on stack here.
(threadfunc_ix): Ditto for stack offset. Make shared so that stack walk
potentially only has to be done once when cygwin processes are running.
(threadfunc_fe): Use standard tls to store thread function (may change back
later).
(calibration_thread): New function. Potentially called to find threadfunc_ix.
(munge_threadfunc): Search for "search_for" value on stack. Output warning
when thread func not found on stack. Use standard tls to store thread
function.
(prime_threads): New function. Called to prime thread front end.
(dll_entry): Call dll_crt0_0 here when DLL_PROCESS_ATTACH. Call prime_threads
here. Try to remove thread from signal list here.
* sigproc.cc (wait_sig): Initialize threadlist exception stuff here.
* thread.cc (pthread::exit): Pass argument to signal list remove function.
* thread.h: Remove obsolete *ResourceLock defines.
* tlsoffsets.h: Regenerate.
* winsup.h (spf): Define temporary debug macro to be deleted later.
* dcrt0.cc (dll_crt0_0): New function, called during DLL initialization.
Mainly consists of code pulled from dll_crt0_1.
(dll_crt0_1): See above.
(_dll_crt0): Wait for initial calibration thread to complete, if appropriate.
Move some stuff to dll_crt0_0.
(initialize_main_tls): Accommodate argument change to
_thread_info::init_thread.
* fork.cc (fork_child): Ditto.
(sync_with_child): Fix debug message.
* external.cc (cygwin_internal): Remove special considerations for
uninitialized dll since initialization happens during dll attach now.
* dlfcn.cc (dlopen): Remove obsolete *ResourceLock calls.
(dlclose): Ditto.
* cygheap.h (init_cygheap::close_ctty): Declare new function.
* cygheap.cc (init_cygheap::close_ctty): Define new function.
* syscalls.cc (close_all_files): Use close_ctty.
(setsid): Ditto.
* cygthread.cc (cygthread::stub): Remove exception initialization.
* cygthread.cc (cygthread::stub): Remove exception initialization.
(cygthread::simplestub): Ditto.
* thread.cc (pthread::thread_init_wrapper): Ditto.
* cygtls.cc (_last_thread): Make static.
(_threadinfo::call2): Initialize exception handler here.
(_threadinfo::find_tls): Move here.
* exceptions.cc (_threadinfo::find_tls): Move.
* dcrt0.cc (__api_fatal): Add prefix info to message here rather than including
it in every call to function.
* winsup.h (api_fatal): Accommodate above change.
* debug.cc (add_handle): Don't do anything if cygheap not around.
(mark_closed): Ditto.
* dll_init.cc (dll_list::detach): Fix debug output.
* fork.cc (sync_with_child): Ditto.
(vfork): Improve debug output.
* heap.cc (heap_init): Ditto.
* exceptions.cc (try_to_debug): Clarify message when debugger attaches.
calculated mask in debugging output.
* sigproc.h (set_signal_mask): Reflect above change in declaration.
* path.cc (mount_item::build_win32): Take path apart before feeding it to
fnmunge. Throughout, change use of _reent_winsup()-> to _my_tls.locals.
instead. Throughout, remove obsolete MT_SAFE/_CYG_THREAD_FAILSAFE
considerations. Througout, add cygtls.h include.
* Makefile.in (DLL_OFILES): Add cygtls.o. Add some more objects to the
-fomit-frame-pointer list.
* acconfig.h: Remove obsolete settings.
* config.h.in: Ditto.
* bsdlib.cc: Add cygtls.h include.
* configure.in: Remove --enable-extra-threadsafe-checking.
* configure: Regenerate.
* cygtls.h (_local_storage): New struct renamed from _winsup_t (sic).
(_threadinfo:local_clib): Add new field.
(_threadinfo::locals): Ditto.
(_threadinfo::init_thread): Accept second _reent * argument.
(_threadinfo::call): Define as regparm.
(CYGTLS_PADSIZE): Remove unnecessary slop.
(_getreent): Define as a macro.
* thread.h: Remove _CYG_THREAD_FAILSAFE and MT_SAFE stuff.
(_winsup_t): Move to cygtls.h.
(ResourceLocks::ResourceLocks): Eliminate empty constructor.
(MTinterface::reents): Eliminate.
(MTinterface::thread_self_key): Eliminate.
(MTinterface::MTinterface): Eliminate.
* dcrt0.cc: Include stdio.h for _impure_ptr initialization.
(do_global_ctors): Remove run_ctors_p (sic) considerations. Don't call atexit
here.
(__main): Initialize destructors for user here.
(dll_crt0_1): Accept a dummy argument. Don't call init_thread here. Don't set
_impure_ptr here. Call do_global_ctors after more things have been
initialized.
(_dll_crt0): Define zeros buffer as max of needed size of CYGTLS_PADSIZE so
that it can be used for two purposes while minimizing stack usage. Initialize
_impure_ptr specifically, for speed. Call dll_crt0_1 with buffer argument.
(cygwin_dll_init): Call dll_crt0_1 with dummy argument.
* dtable.cc (dtable::find_unused_handle): Remove call to AssertResourceOwner.
* exceptions.cc: Move _threadinfo stuff to new file.
* cygtls.cc: New file.
* gentls_offsets: Accommodate increasing complexity of cygtls.h.
* hires.h (hires_base::~hires_base): Remove.
* init.cc (dll_entry): Remove setting of reents.
* thread.cc: Remove syslog.h include.
(__getreent): Simplify to use _my_tls.
(_reent_winsup): Delete.
(AssertResourceOwner): Delete.
(MTinterface::Init): Remove setting of _clib and _winsup, with all that
entails.
(MTinterface::fixup_after_fork): Ditto.
(pthread::thread_init_wrapper): Ditto. Also remove call to
set_tls_self_pointer.
(pthread::set_tls_self_pointer): Eliminate.
(pthread::get_tls_self_pointer): Just return _my_tls.tid;
(__reent_t::init_clib): Eliminate.
* tlsoffsets.h: Regenerate.
cygthread::stub2. Just return from function now since ExitThread is guaranteed
by automatic _threadinfo wrapper. Define as per ThreadProc convention.
(cygthread::stub2): Remove.
(cygthread::simplestub): Perform similar operations to cygthread::stub.
(cygthread::simplestub2): Remove.
* cygthread.h (cygthread::stub): Declare as per ThreadProc convention.
(cygthread::stub2): Remove declaration.
(cygthread::simplestub): Declare as per ThreadProc convention.
(cygthread::simplestub2): Remove declaration.
* cygtls.h (_threadinfo::call): Define first argument as per ThreadProc
convention.
(_threadinfo::call2): Ditto.
(_tlsbase): Define as char * pointer.
(_tlstop): New definition.
(_main_tls): Define here.
* dcrt0.cc (alloc_stack): Revert previous change which called init_thread since
information would be overwritten by fork later anyway.
(dll_crt0_1): Use _tlsbase and _tlstop for setting stack bottom, top.
* exceptions.cc: Move _main_tls declaration to cygtls.h.
(_threadinfo::call): Define first argument as per ThreadProc convention.
(_threadinfo::call2): Call ExitThread with thread function return value.
(_threadinfo::init_thread): Don't initialize cygtls to zero if input arg is
NULL.
* fork.cc (fork_child): Reset _main_tls here. Reinitialize parts of _my_tls
after copying data from parent.
* init.cc (threadfunc_fe): New function. Front-end for all threads created in
cygwin processes.
(munge_threadfunc): New function.
(dll_entry): Call munge_threadfunc to force the call of a thread wrapper.
* thread.cc (pthread::thread_init_wrapper): Perform similar operations to
cygthread::stub.
(pthread::thread_init_wrapper2): Remove.
* thread.h (pthread::thread_init_wrapper): Declare as per ThreadProc
convention.
(pthread::thread_init_wrapper2): Remove declaration.
* window.cc (Winmain): Just return from function now since ExitThread is
guaranteed by automatic _threadinfo wrapper.
(_threadinfo::init_thread): Rename from 'init'.
(_threadinfo::init): Declare new function.
(_threadinfo::protect_linked_list): Declare new critical section.
* dcrt0.cc (dll_crt0_1): Call init_thread to initialize thread stuff.
(_dll_crt0): Call _threadinfo::init prior to invoking dll_crt0_1.
* exceptions.cc (_threadinfo::init_thread): Rename from 'init'.
(_threadinfo::init): Define new function. Protect linked list manipulation
with new critical section.
(_threadinfo::call): Reflect function name change.
(_threadinfo::remove): Protect linked list manipulation with new critical
section
* gentls_offsets: Rework to allow multi-line "don't parse this" protection.
* init.cc (dll_entry): Don't remove threads info stuff here since the remove
function uses a critical section which can't be used during thread creation or
destruction.
* thread.cc (pthread::exit): Call _threadinfo remove function here.
List_insert call.
(pthread::prepare): Ensure race safeness when adding function
pointers to atfork lists by using List_insert.
* thread.h (List_insert): Use InterlockedCompareExchangePointer to
ensure race safeness without using a mutex.
(List_remove): Use InterlockedCompareExchangePointer to
ensure race safeness with List_insert.
(List::insert): Remove mx parameter for List_insert call.
* Makefile.in (DLL_OFILES): Add sigfe.o. Remove reliance on cygwin.def from
cygwin0.dll dependency since dependence on sigfe.o implies that. Generate def
file on the fly using 'gendef'.
* configure.in: Don't auto-generate cygwin.def.
* configure: Regenerate.
* cygwin.din: Add SIGFE stuff where appropriate.
* dcrt0.cc (dll_crt0_1): Initialize cygwin tls early in process startup. Set
_main_tls to address of the main thread's cygwin tls.
* debug.h: Remove now unneeded WFSO and WFMO declarations.
* exceptions.cc (_last_thread): Define.
(set_thread_state_for_signals): New function.
(reset_thread_exception_for_signals): Ditto.
(init_thread_for_signals): Ditto.
(delete_thread_for_signals): Ditto.
(capture_thread_for_signals): Ditto.
(handle_exceptions): Set return address explicitly for exceptions prior to
calling sig_send.
(interrupt_on_return): Eliminate.
(setup_handler): Add preliminary implementation for dealing with
thread-specific signals by querying _main_tls.
(signal_exit): Use cygthread::main_thread_id instead of mainthread.id.
(call_signal_handler_now): For now, just handle the main thread.
* fork.cc (vfork): Save and restore main _my_tls.
* gendef: New file. Generates def file and sigfe.s file.
* gentls_offsets: New file. Generates offsets for perl to use in sigfe.s.
* how-signals-work.txt: Mention that info is obsolete.
* init.cc (dll_entry): Initialize cygwin tls storage here.
* miscfuncs.cc (low_priority_sleep): Make a C function for easier calling from
asm.
* perthread.h (vfork_save::tls): New element.
* signal.cc (nanosleep): Replace previous use of
sigframe.call_signal_handler_now with straight call to call_signal_handler_now.
(abort): Ditto.
* syscalls.cc (readv): Ditto.
* termios.cc (tcsetattr): Ditto.
* wait.cc (wait4): Ditto.
* sigproc.cc (sig_dispatch_pending): Ditto.
(sig_send): Ditto.
* sigproc.h: Declare call_signal_handler_now.
* thread.cc (pthread::thread_init_wrapper): Initialize cygwin tls. Remove
obsolete and unworking signal stuff.
* thread.h (verifyable_object::sigs): Eliminate.
(verifyable_object::sigmask): Eliminate.
(verifyable_object::sigtodo): Eliminate.
(verifyable_object::exit): Make attribute noreturn.
(verifyable_object::thread_init_wrapper): Ditto.
(pthread_null::exit): Ditto.
* winbase.h (__stackbase): Always define.
* winsup.h (low_priority_sleep): Declare as a "C" function.
* include/cygwin/version.h: Bump API version to reflect sigwait export.
* include/sys/queue.h: Protect SLIST_ENTRY from previous declaration.
* signal.cc (sigwait): Implement.
* select.cc (fhandler_base::ready_for_read): Add debugging output.
* devices.h: Define more device pointers via their storage.
* devices.in: Don't parse things like /dev/inet/tcp, as they really have no
meaning.
* devices.cc: Regenerate.
* gendevices: Set proper protection for output file.
* cygtls.h: New file.
* gendef: New file.
* gentls_offsets: New file.
* tlsoffsets.h: New file. Autogenerated.
* config/i386/longjmp.c: Remove. File subsumed by gendef output.
* config/i386/makefrag: Remove obsolete file.
* fhandler.cc: Remove spurious access_worker declaration.
* spawn.cc (spawnve): Make debugging output more accurate.
* cygwin-gperf: Remove.
* devices.cc: Remove.
set_security_attribute appropriately.
* external.cc (cygwin_internal): Ditto.
* fhandler.cc (fhandler_base::open): Ditto.
* fhandler_socket.cc (fhandler_socket::bind): Ditto.
* path.cc (symlink_worker): Ditto.
* sec_acl.cc (setacl): Ditto. Call read_sd appropriately.
(getace): Ditto.
* sec_helper.cc (security_descriptor::malloc): New method.
(security_descriptor::realloc): New method.
(security_descriptor::free): New method.
* security.cc (read_sd): Get security_descriptor as parameter instead
of PSECURITY_DESCRIPTOR and a size. Drop unnecessary parameter check.
Allocate the security_descriptor buffer according to size returned by
a call to GetFileSecurity. Return buffer size on success.
(write_sd): Get security_descriptor as parameter instead of
PSECURITY_DESCRIPTOR and a size.
(get_nt_attribute): Use local security_descriptor.
(get_nt_object_attribute): Ditto in case of type == SE_REGISTRY_KEY.
Allocate security_descriptor buffer according to size returned by
a call to RegGetKeySecurity.
(alloc_sd): Make static. Get security_descriptor as parameter instead
of PSECURITY_DESCRIPTOR and a size. Drop unnecessary parameter check.
(set_security_attribute): Get security_descriptor as parameter instead
of PSECURITY_DESCRIPTOR and a size.
(set_nt_attribute): Use local security_descriptor.
(check_file_access): Ditto.
* security.h: Add class security_descriptor.
(read_sd): Change declaration to get security_descriptor as parameter
instead of PSECURITY_DESCRIPTOR and a size.
(write_sd): Ditto.
(set_security_attribute): Ditto.
(alloc_sd): Remove declaration.
* thread.cc (semaphore::semaphore): Use local security_descriptor. Call
set_security_attribute appropriately.
* pthread.cc (+mangle_sem_name): New function.
(sem_open): Ditto.
(sem_close: Ditto.
(sem_timedwait): Ditto.
(sem_getvalue): Ditto.
* thread.cc (semaphore::semaphore): Rearrange member initialization.
Use appropriate security attribute for process shared semaphores.
(semaphore::semaphore): New constructor for named semaphores.
(semaphore::~semaphore): Care for semaphore name.
(semaphore::_post): Accomodate failing ReleaseSemaphore. Use value
returned by ReleaseSemaphore vor currentvalue.
(semaphore::_getvalue): New method.
(semaphore::_timedwait): Ditto.
(semaphore::_fixup_after_fork): Rearrange. Don't fail for process
shared semaphores.
(semaphore::open): New method.
(semaphore::timedwait): Ditto.
(semaphore::post): Fix return value. Set errno appropriately.
(semaphore::getvalue): New method.
* thread.h (class semaphore): Add prototypes for open, getvalue,
timedwait, _getvalue, _timedwait. Add prototypes for new constructor.
Add name member.
* include/semaphore.h: Add prototypes for sem_open, sem_close,
sem_timedwait and sem_getvalue.
include/cygwin/version.h: Bump API minor number.
Rename pthread_key::save_key_to_buffer to
pthread_key::_fixup_before_fork throughout.
Rename pthread_key::recreate_key_from_buffer to
pthread_key::_fixup_after_fork throughout.
* thread.cc (native_mutex::init): Remove.
(native_mutex::lock): Ditto.
(native_mutex::unlock): Ditto.
(pthread::push_cleanup_handler): InterlockedExchangePointer
is not needed here.
(pthread_rwlock::pthread_rwlock): Initialize readers list mutex.
(pthread_rwlock::add_reader): Add reader via List_insert.
(pthread_rwlock::lookup_reader): Lock list while walking through.
(pthread_cond::init): Locking the init mutex is now void.
(pthread_rwlock::init): Ditto.
(pthread_mutex::init): Ditto.
* thread.h: Include security.h.
(fast_mutex): New class. Replacement for native_mutex.
(List_insert): New template function.
(List_remove): Ditto.
(List::List): Initialize synchronising mutex.
(List::fixup_after_fork): New method.
(List::insert): Add node via List_insert.
(List::remove): Remove node via List_remove.
(List::pop): Remove.
(List::for_each): Lock list while walking through.
(List::mx_init): New method.
(pthread_mutex::fixup_after_fork): Fixup mutex list after fork.
(pthread::fixup_after_fork): Ditto.
(pthread_conds::fixup_after_fork): Ditto.
(pthread_rwlock::fixup_after_fork): Ditto.
(semaphore::fixup_after_fork): Ditto.
(pthread_rwlock::readers_mx): New member.
* devices.gperf: New file.
* devices.shilka: New file.
* cygwin-gperf: New file.
* cygwin-shilka: New file.
* fhandler_fifo.cc: New file.
* fhandler_nodevice.cc : New file. Reorganize headers so that path.h precedes
fhandler.h throughout. Remove device argument and unit arguments from fhandler
constructors throughout. Remove pc arguments to fhandler functions and use
internal pc element instead, throughout. Use dev element in pc throughout.
Use major/minor elements rather than units and device numbers previously in
fhandler class. Use correct methods for fhandler file names rather than
directly accessing file name variables, throughout.
* Makefile.in (DLL_OFILES): Add devices.o, fhandler_fifo.o
* dcrt0.cc (dll_crt0_1): Call device::init.
* devices.h: Renumber devices based on more Linux-like major/minor numbers.
Add more devices. Declare standard device storage.
(device): Declare struct.
* dir.cc (opendir): Use new 'build_fh_name' to construct a fhandler_* type.
* dtable.cc (dtable::get_debugger_info): Ditto.
(cygwin_attach_handle_to_fd): Ditto.
(dtable::release): Remove special FH_SOCKET case in favor of generic
"need_fixup_before" test.
(dtable::init_std_file_from_handle): Use either build_fh_dev or build_fh_name
to build standard fhandler.
(dtable::build_fh_name): Renamed from dtable::build_fhandler_from_name. Move
out of dtable class. Don't accept a path_conv argument. Just build it here
and pass it to:
(build_fh_pc): Renamed from dtable::build_fhandler. Move out of dtable class.
Use intrinsic device type in path_conv to create new fhandler.
(build_fh_dev): Renamed from dtable::build_fhandler. Move out of dtable class.
Simplify arguments to just take new 'device' type and a name. Just return
pointer to fhandler rather than trying to insert into dtable.
(dtable::dup_worker): Accommodate above build_fh name changes.
(dtable::find_fifo): New (currently broken) function.
(handle_to_fn): Use strechr for efficiency.
* dtable.h: Reflect above build_fh name changes and argument differences.
(fhandler_base *&operator []): Return self rather than copy of self.
* fhandler.cc (fhandler_base::operator =): Use pc element to set normalized
path.
(fhandler_base::set_name): Ditto.
(fhandler_base::raw_read): Use method to access name.
(fhandler_base::write): Correctly use get_output_handle rather than get_handle.
(handler_base::device_access_denied): New function.
(fhandler_base::open): Eliminate pc argument and use pc element of
fhandler_base throughout.
(fhandler_base::fstat): Detect if device is based in filesystem and use
fstat_fs to calculate stat, if so.
(fhandler_base::fhandler_base): Eliminate handling of file names and, instead,
just free appropriate component from pc.
(fhandler_base::opendir): Remove path_conv parameter.
* fhandler.h: Remove all device flags.
(fhandler_base::pc): New element.
(fhandler_base::set_name): Change argument to path_conv.
(fhandler_base::error): New function.
(fhandler_base::exists): New function.
(fhandler_base::pc_binmode): New function.
(fhandler_base::dev): New function.
(fhandler_base::open_fs): New function.
(fhandler_base::fstat_fs): New function.
(fhandler_base::fstat_by_name): New function.
(fhandler_base::fstat_by_handle): New function.
(fhandler_base::isfifo): New function.
(fhandler_base::is_slow): New function.
(fhandler_base::is_auto_device): New function.
(fhandler_base::is_fs_special): New function.
(fhandler_base::device_access_denied): New function.
(fhandler_base::operator DWORD&): New operator.
(fhandler_base::get_name): Return normalized path from pc.
(fhandler_base::get_win32_name): Return windows path from pc.
(fhandler_base::isdevice): Renamed from is_device.
(fhandler_base::get_native_name): Return device format.
(fhandler_fifo): New class.
(fhandler_nodevice): New class.
(select_stuff::device_specific): Remove array.
(select_stuff::device_specific_pipe): New class element.
(select_stuff::device_specific_socket): New class element.
(select_stuff::device_specific_serial): New class element.
(select_stuff::select_stuff): Initialize new elements.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Move to base class
from fhandler_disk_file.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_base::fstat_by_name): Ditto.
(fhandler_disk_file::open): Move most functionality into
fhandler_base::open_fs.
(fhandler_base::open_fs): New function.
(fhandler_disk_file::close): Move most functionality into
fhandler_base::close_fs.
(fhandler_base::close_fs): New function.
* fhandler_mem.cc (fhandler_dev_mem::open): Use device name in debugging
output.
* fhandler_socket.cc (fhandler_socket::set_connect_secret): Copy standard
urandom device into appropriate place.
(fhandler_socket::accept): Reflect change in fdsock return value.
* fhandler_tty.cc: See "throughouts" above.
* net.cc: Accommodate fdsock change throughout.
(fdsock): Return success or failure, accept fd argument and device argument.
* path.cc (symlink_info::major): New element.
(symlink_info::minor): New element.
(symlink_info::parse_device): Declare new function.
(fs_info::update): Accommodate changes in path_conv class.
(path_conv::fillin): Ditto.
(path_conv::return_and_clear_normalized_path): Eliminate.
(path_conv::set_normalized_path): New function.
(path_conv::path_conv): Set info in dev element. Use path_conv methods Check
for FH_FS rather than FH_BAD to indicate when to fill in filesystem stuff.
where appropriate rather than direct access. Use set_normalized_path to set
normalized path.
(windows_device_names): Eliminate.
(get_dev): Ditto.
(get_raw_device_number): Ditto.
(get_device_number): Ditto.
(win32_device_name): Call new device name parser to do most of the heavy
lifting.
(mount_info::conv_to_win32_path): Fill in dev field as appropriate.
(symlink_worker): Handle new device files.
(symlink_info::check): Ditto.
(symlink_info::parse_device): Define new function.
* path.h (executable_states): Move here from fhandler.h.
(fs_info): Rename variables to *_storage and create methods for accessing same.
(path_conv): Add dev element, remove devn and unit and adjust inline methods to
accommodate.
(set_normalized_path): Declare new function.
* pinfo.cc (_pinfo::commune_recv): Add broken support for handling fifos.
(_pinfo::commune_send): Ditto.
* pipe.cc (fhandler_pipe::close): check for existence of handle before closing
it.
(handler_pipe::create): Rename from make_pipe. Change arguments to accept
fhandler_pipe array. Accommodate fifos.
(pipe): Rework to deal with fhandler_pipe::create changes.
(_pipe): Ditto.
* select.cc: Use individual device_specific types throughout rather than
indexing with obsolete device number.
(set_bits): Use is_socket call rather than checking device number.
* shared_info.h (CURR_MOUNT_MAGIC): Update.
(conv_to_win32_path): Reflect addition of device argument.
* syscalls.cc (mknod_worker): New function.
(open): Use build_fh_name to build fhandler.
(chown_worker): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(chmod_device): New function.
(chmod): Detect if this is an 'auto' device rather than an on-filesystem device
and handle appropriately. Use chmod_device to set mode of in-filesystem
devices.
(stat_worker): Eliminate path_conv argument. Call build_fh_name to construct
fhandler. Use fh->error() rather than pc->error to detect errors in fhandler
construction.
(access_worker): New function pulled from access. Accommodate in-filesystem
devices.
(access): Use access_worker.
(fpathconf): Detect if this is an 'auto' device rather than an on-filesystem
device and handle appropriately.
(mknod_worker): New function.
(mknod32): New function.
(chroot): Free normalized path -- assuming it was actually cmalloced.
* tty.cc (create_tty_master): Tweak for new device class.
(tty::common_init): Ditto.
* winsup.h (stat_worker): Remove.
(symlink_worker): Declare.
* exceptions.cc (set_process_mask): Just call sig_dispatch_pending and don't
worry about pending_signals since sig_dispatch_pending should always do the
right thing now.
(sig_handle): Reorganize SIGCONT handling to more closely conform to SUSv3.
* pinfo.h: Move __SIG enum to sigproc.h.
(PICOM_FIFO): New enum element.
(_pinfo): Remove 'thread2signal' stuff throughout class.
(_pinfo::commune_send): Make varargs.
(_pinfo::sigtodo): Eliminate.
(_pinfo::thread2signal): Ditto.
* signal.cc (kill_worker): Eliminate call to setthread2signal.
* sigproc.cc (local_sigtodo): Eliminate.
(getlocal_sigtodo): Ditto.
(sigelem): New class.
(pending_signals): New class.
(sigqueue): New variable, start of sigqueue linked list.
(sigcatch_nonmain): Eliminate.
(sigcatch_main): Eliminate.
(sigcatch_nosync): Eliminate.
(sigcomplete_nonmain): Eliminate.
(pending_signals): Eliminate.
(sig_clear): Call signal thread to clear pending signals, unless already in
signal thread.
(sigpending): Call signal thread to get pending signals.
(sig_dispatch_pending): Eliminate use of pending_signals and just check
sigqueue.
(sigproc_terminate): Eliminate all of the obsolete semaphore stuff. Close
signal pipe handle.
(sig_send): Eliminate all of the obsolete semaphore stuff and use pipe to send
signals.
(getevent): Eliminate.
(pending_signals::add): New function.
(pending_signals::del): New function.
(pending_signals::next): New function.
(wait_sig): Eliminate all of the obsolete semaphore stuff. Use pipe to
communicate and maintain a linked list of signals.
* sigproc.h: Move __SIG defines here. Add __SIGPENDING.
(sig_dispatch_pending): Remove "C" specifier.
(sig_handle): Accept a mask argument.
* thread.cc: Remove signal handling considerations throughout.
* thread.cc (__reent_t::init_clib): Define new function.
(pthread::thread_init_wrapper): Use __reent_t::init_clib to init local clib
storage and set std{in,out,err} appropriately.
is a tty associated with the process. Send SIGHUP on CTRL_LOGOFF_EVENT.
* fhandler_tty.cc (fhandler_tty_slave::open): Adjust console open handle
counter regardless of whether this is a pty or tty.
(fhandler_tty_slave::open): Ditto.
(fhandler_tty_slave::dup): Ditto.
(fhandler_tty_common::set_close_on_exec): Ditto.
(fhandler_tty_master::init_console): Decrement console open handle counter
after init since it will now be handled by all tty open.
* syscalls.cc (setsid): Rework debugging output slightly.
(pthread::threads): Instantiate.
(pthread::pthread): Initialize running and suspendend.
Initialize next with NULL.
Add thread to thread list if it is not the null_pthread.
(pthread::~pthread): Remove thread from thread list if it is not the null_pthread.
(pthread::postcreate): Set running flag.
(pthread::exit): Reset running flag.
(pthread::cancel): Try to cancel thread only if still running.
(pthread::_fixup_after_fork): Implement.
(pthread::detach): Check if thread is still running before detach.
* thread.h (pthread::running): New member.
(pthread::next): Ditto.
(pthread::fixup_after_fork): New static method.
(pthread::threads): New static method.
(pthread::_fixup_after_fork): New method.
cygerrno.h.
* include/cygwin/config.h (__DYNAMIC_REENT__): Define.
* include/cygwin/version.h: Bump API minor version.
* cygwin.din: Export __getreent
* cygerrno.h: Include errno.h. Fix places where _impure_ptr is used directly
to store the errno value.
* debug.cc (__set_errno): Ditto.
* errno.cc: Remove _RRENT_ONLY define to get errno.cc compiled.
* signal.cc: Rename _reent_clib to _REENT throughout.
* thread.h (reent_clib): Remove prototype.
* thread.cc (reent_clib): Rename reent_clib to __getreent. Return _impure_ptr
until MTinterface is initialized.
(reent_winsup): Fix a possible SEGV when _r == NULL. Return NULL instead.
* MTinterface::fixup_after_fork: Switch reent back to _impure_ptr to keep
signal handling running when fork is called from a thread other than the
mainthread.
to return 0 if attribute is already initialized back to EBUSY.
(pthread_condattr_init): Ditto.
(pthread_rwlockattr_init): Ditto.
(pthread_mutexattr_init): Ditto.
Fix return code if out of memory.
(pthread_condattr_init): Ditto.
(pthread_rwlockattr_init): Ditto.
(pthread_mutexattr_init): Return 0 if attribute is already initialized.
(MTinterface::Init): Ditto.
* thread.cc (MTinterface::Init): Remove function parameter.
Always initialize reent_key.
(pthread::init_mainthread): Remove function parameter.
(MTinterface::fixup_after_fork): Fix pthread::init_mainthread call.
* dcrt0.cc (dll_crt_0_1) Fix calls to MTinterface::Init and
pthread::init_mainthread.
Call pthread::init_mainthread only when not forked.
* thread.h (pthread_rwlock::release): New method.
* thread.cc (pthread_rwlock::unlock): Use release to signal
waiting threads.
(pthread_rwlock::rdlock_cleanup): Signal waiting threads after a
cancelation.
(pthread_rwlock::wrlock_cleanup): Ditto.
according to the GNU coding style.
* thread.cc: Ditto.
* dcrt0.cc (dll_crt0_1): Rename pthread::initMainThread call to
pthread::init_mainthread.
* pthread.cc (pthead_getsequence_np): Rename pthread::isGoodObject
call to pthread::is_good_object.
declaration.
(List::forEach): Change callback parameter to template class
member functionpointer.
(pthread_keys::fixup_before_fork): Change to inline. Use
List::forEach to fixup keys.
(pthread_keys::fixup_after_fork): Ditto.
(pthread_keys::runAllDestructors): Ditto.
(pthread_key::saveAKey): Remove.
(pthread_key::restoreAKey): Ditto.
(pthread_key::destroyAKey): Ditto.
(pthread_key::run_destructor): Rename to runDestructor.
(pthread_mutex::fixup_after_fork): Change to inline. Use
List::forEach to fixup mutexes after a fork.
(pthread_mutex::FixupAfterFork): New method.
(pthread_mutex::mutexes): New member.
(pthread_cond::fixup_after_fork): Change to inline. Use
List::forEach to fixup conds after a fork.
(pthread_cond::FixupAfterFork): New method.
(pthread_cond::conds): New member.
(pthread_rwlock::fixup_after_fork): Change to inline. Use
List::forEach to fixup rwlocks after a fork.
(pthread_rwlock::FixupAfterFork): New method.
(pthread_rwlock::rwlocks): New member.
(semaphore::fixup_after_fork): Change to inline. Use
List::forEach to fixup mutexes after a fork.
(semaphore::FixupAfterFork): New method.
(semaphore::semaphores): New member.
(MTinterface::mutexs): Remove.
(MTinterface::conds): Ditto.
(MTinterface::rwlocks): Ditto.
(MTinterface::semaphores): Ditto.
(pthread_equal): Add extern "C".
(pthread_mutex_lock): Ditto.
* thread.cc (MTinterface::fixup_after_fork): Change
fixup_after_fork calls for pthread objects.
(semaphore::conds): Instantiate.
(pthread_cond::pthread_cond): Use List::Insert rather than
custom list code.
(pthread_cond::~pthread_cond): Use List::Remove rather than
custom list code.
(pthread_cond::fixup_after_fork): Rename to FixupAfterFork.
(pthread_rwlock::rwlocks): Instantiate.
(pthread_rwlock::pthread_crwlock): Use List::Insert rather than
custom list code.
(pthread_rwlock::~pthread_rwlock): Use List::Remove rather than
custom list code.
(pthread_rwlock::fixup_after_fork): Rename to FixupAfterFork.
(pthread_key::saveAKey): Remove.
(pthread_key::fixup_before_fork): Ditto.
(pthread_key::restoreAKey): Ditto.
(pthread_key::fixup_after_fork): Ditto.
(pthread_key::destroyAKey): Ditto.
(pthread_key::runAllDestructors): Ditto.
(pthread_key::run_destructor): Rename to runDestructor.
(pthread_mutex::mutexes): Instantiate.
(pthread_mutex::pthread_mutex): Use List::Insert rather than
custom list code.
(pthread_mutex::~pthread_mutex): Use List::Remove rather than
custom list code.
(pthread_mutex::fixup_after_fork): Rename to FixupAfterFork.
(semaphore::conds): Instantiate.
(semaphore::semaphore): Use List::Insert rather than custom list
code.
(semaphores::~semaphore): Use List::Remove rather than custom
list code.
(semaphore::fixup_after_fork): Rename to FixupAfterFork.
* dcrt0.cc (dll_crt0_1): Add call to pthread::initMainThread to
initialize mainthread when it is safe to call new.
* init.cc (dll_entry): Change call to store reents in tls key.
* thread.cc (_reent_clib) : Change call to get reents from tls
key.
(_reent_winsup): Ditto.
(MTinterface::Init): Key handling changed. Remove initialization
of member variables.
(MTinterface::fixup_after_fork): Reinitialize mainthread object
after fork. Reset threadount to 1.
(pthread::initMainThread): Create mainthread object dynamically.
and initialize with valid handles.
(pthread::self): Remove calls to create thread objects.
(pthread::setTlsSelfPointer): Change call to store thread self
handle in tls key.
(pthread::getTlsSelfPointer): New static method.
(pthread::exit): Remove setTlsSelfPointer call.
(pthread::initCurrentThread): New method.
(pthread::thread_init_wrapper): Change call to store thread self
handle in tls key.
(pthread::join): Check for a valid joiner.
(pthreadNull::pthreadNull): Mark Null object as detached.
(pthreadNull::exit): Terminate thread via ExitThread.
* thread.h (pthread::initMainThread): Change parameter in function
call.
(pthread::getTlsSelfPointer): New static method.
(pthread::initCurrentThread): New method.
(MTinterface::reent_key): Remove.
(MTinterface::thread_self_dwTlsIndex): Ditto..
(MTinterface::indexallocated): Ditto.
(MTinterface::mainthread): Ditto.
(MTinterface::reent_key): New member.
(MTinterface::thread_self_key): Ditto.
(MTinterface::MTinterface): Initialize all members.
is supposed to be giving up time slice.
* fhandler_console.cc (fhandler_console::read): Switch button 2/3 output escape
sequences to be consistent with xterm.
Rename _pid() to pid() throughout.
* Makefile.in: Compile some objects with -fomit-frame-pointer.
* cygwin.din: Reverse aliasing for _kill.
* syscalls.cc (_getpid_r): New function, implemented for newlib compatibility.
* shared.cc (open_shared): Remove reserving of memory since previous change
eliminate the need for this hack.
* thread.cc (pthread_key::keys): Copy on fork. Add a comment explaining
why.
(pthreadNull::_instance): Copy on fork. Absolutely no state exists
in pthreadNull.
* thread.cc (pthread_mutex::initMutex): Use the wrapper init call.
(pthread_mutex::nativeMutex::init): Implement.
(pthread_mutex::nativeMutex::lock): Ditto.
(pthread_mutex::nativeMutex::unlock): Ditto.
(pthread_mutex::init): Use the wrapper lock and unlockcalls.
* thread.h (pthread_mutex): Move mutexInitializationLock into a
nativeMutex wrapper class.
* pthread.cc (pthread_mutex_init): Use new pthread_mutex::init.
* thread.cc: Change __pthread_mutex_init to pthread_mutex::init
throughout.
(MTinterface::Init): Initialise pthread_mutex support.
(pthread_mutex::mutexInitializationLock): Instantiate.
(pthread_mutex::initMutex): New method.
(__pthread_cond_dowait): Don't dereference untrusted pointers.
Use the new pthread_mutex::init method.
(__pthread_condattr_init): Don't dereference untrusted pointers.
(__pthread_mutex_init): Rename to pthread_mutex::init.
Lock and release mutexInitializationLock to prevent races on
mutex initialisation.
* thread.h (pthread_mutex::initMutex): New method, initialise
pthread_mutex supporting state on process initialisation.
(pthread_mutex::init): Initialise a single mutex.
(pthread_mutex::mutexInitializationLock): A win32 mutex for
syncronising pthread mutex initialisation.
(__pthread_mutex_init): Remove this.
* thread.cc (pthread_key::run_destructor): Run_destructor is not
const as it needs to set the key value.
* thread.h (pthread_key::run_destructor): Ditto.
2002-09-27 Robert Collins <rbtcollins@hotmail.com>
* thread.cc (pthread_key::run_destructor): Follow opengroup algorithm.
I.e. only run the destructor NON-NULL key values, and reset the key
to NULL before running the destructor. Reported by Thomas Pfaff.
already taken care of that.
* fhandler_console.cc (fhandler_console::open): Initialize handles to NULL.
(fhandler_console::close): Ditto. GNUify non-GNU formatted functions calls
throughout.
* pthread.cc: Use class::call for converted pthread and semaphore
calls.
* thread.cc: Convert various __pthread_call and __sem_call to
pthread::call and sem::call throughout.
* pthread.h (__pthread_cancel): Convert to pthread::cancel.
(__pthread_join): Convert to pthread::join.
(__pthread_detach): Convert to pthread::detach.
(__pthread_create): Convert to pthread::create.
(__pthread_once): Convert to pthread::once.
(__pthread_atfork): Convert to pthread::atfork.
(__pthread_suspend): Convert to pthread::suspend.
(__pthread_continue): Convert to pthread::resume.
(__sem_init): Convert to semaphore::init.
(__sem_destroy): Convert to semaphore::destroy.
(__sem_wait): Convert to semaphore::wait.
(__sem_trywait): Convert to semaphore::trywait.
(__sem_post): Convert to semaphore::post.
* thread.cc: Finish the removal of the separate pthread_key
destructor list.
Remove all pthread_key_destructor and pthread_key_destructor_list
references throughout.
(pthread::exit): Call the new pthread_key interface to activate
destructors.
(pthread_key::keys): Change into a list.
(pthread_key::saveAKey): New method, used via forEach.
(pthread_key::restoreAKey): Ditto.
(pthread_key::destroyAKey): Ditto.
(pthread_key::fixup_before_fork): Use the List::forEach functionality.
(pthread_key::fixup_after_fork): Ditto.
(pthread_key::runAllDestructors): New method implementation.
(pthread_key::pthread_key): Use List::Insert rather than custom list
code.
(pthread_key::~pthread_key): Use List::Remove for the same reason.
* thread.h: Remove all pthread_key_destructor and
pthread_key_destructor_list references throughout.
(List): Move the interface above pthread_key in the header.
Use atomic operations during insert and delete.
(List::forEach): A generic interface for doing something on each node.
(pthread_key::runAllDestructors): New method, run all destructors.
(pthread_key::fork_buf): Make private.
(pthread_key::run_destructor): Ditto.
(pthread_key::saveAKey): New method for clearer source.
(pthread_key::restoreAKey): Ditto.
(pthread_key::destroyAKey): Ditto.
(MTinterface::destructors): Remove.
* thread.cc: Partial refactoring of pthread_key destructor
handling. Loosely based on Thomas Pfaff's work.
(pthread_key_destructor_list::Insert): Remove.
(pthread_key_destructor_list::Pop): Remove.
(pthread_key_destructor_list::IterateNull): Call the key's
run_destructor method.
(pthread_key::pthread_key): Initialize new member.
(pthread_key::get): Mark as const for correctness.
(pthread_key::run_destructor): Implement.
* thread.h (pthread_key::get): Mark as const for correctness.
(pthread_key::run_destructor): Declare.
(List): New template class that implements a generic list.
(pthread_key_destructor_list): Inherit from List, and remove
now duplicate functions.
may not end up in the pool.
(cygthread::new): Avoid race when checking for initialized. Add debugging
code.
* fhandler.cc (fhandler_base::raw_read): Add case for ERROR_INVALID_HANDLE due
to Win95 directories.
(fhandler_base::open): Handle errors due to Win95 directories.
(fhandler_base::close): Add get_nohandle () test.
(fhandler_base::set_close_on_exec): Ditto.
(fhandler_base::fork_fixup): Ditto.
(fhandler_base::lock): Change error code to Posix EINVAL.
(fhandler_base::dup): If get_nohandle (), set new value to INVALID_HANDLE_VALUE
instead of NULL.
* fhandler_disk_file.cc (fhandler_disk_file::fstat): Call fstat_by_name if
get_nohandle (). Remove extraneous element from strpbrk.
(fhandler_disk_file::open): Remove test for Win95 directory.
* fhandler_random.cc (fhandler_dev_random::open): Add set_nohandle ().
* fhandler_clipboard.cc (fhandler_dev_clipboard::open): Ditto.
* fhandler_zero.cc (fhandler_dev_zero::open): Ditto.
(fhandler_dev_zero::close): Delete.
* fhandler.h (class fhandler_dev_zero): Ditto.
This work inspires by Thomas Pfaff's pthread_fork patch (1).
* fork.cc (fork_child): Remove MTinterface fixup call, it's
adsorbed by pthread::atforkchild.
Rename __pthread_atforkchild to pthread::atforkchild to give
access to private members.
(fork_parent): Rename __pthread_atforkparent to
pthread::atforkparent to give it access to private members.
Ditto for __pthread_atforkprepare.
* thread.cc: Fix some formatting problems throughout.
(MTinterface::fixup_before_fork): Implement.
(MTinterface::fixup_after_fork): Fix pthread_keys.
(pthread_key::keys): Implement.
(pthread_key::fixup_before_fork): Ditto.
(pthread_key::fixup_after_fork): Ditto.
(pthread_key::pthread_key): Add to pthread_key::keys.
(pthread_key::~pthread_key): Remove from pthread_key::keys.
(pthread_key::saveKeyToBuffer): Implement.
(pthread_key::recreateKeyFromBuffer): Ditto.
(pthread::atforkprepare): Prepare all MT classes for fork.
(pthread::atforkchild): And fix them up afterwards.
* thread.h (pthread_key): Buffer the key value during
fork in fork_buf.
List the keys needing to be fixed up in a linked list with
head pthread_key::keys.
(pthread): Move atfork cygwin internal calls into the class.
(MTInterface): Provide a fixup_before_fork for objecst that
need to save state.
(__pthread_atforkprepare): Remove.
(__pthread_atforkparent): Remove.
(__pthread_atforkchild): Remove.
* init.cc (dll_entry): On thread detach, if the thread hasn't
exit()ed, do so.
* pthread.cc (pthread_getsequence_np): Remove the
__pthread_getsequence_np wrapper. This requires errno.h.
* thread.cc (pthread::self): Instantiate a new pthread object
when called and none exists. return a NULL object if instantiation
fails.
(pthread::precreate): Factor out common code.
(pthread::postcreate): Ditto.
(pthread::create): Ditto.
(pthread::exit): Remove the TLS value when we exit to prevent
double exits.
(MTinterface::Init): Bugfix - don't mark the TLS index as created
if one was not allocated.
Apply Extract Method to move pthread specific initialisation into
pthread.
(pthread::initMainThread): Extracted method from MTinterface::Init.
(pthread::setTlsSelfPointer): Extracted method from various pthread
calls, to make reading those functions easier.
(pthread::setThreadIdtoCurrent): Ditto.
(pthread::cancel_self): Bring into the .cc file, it's only used
within the class.
(pthread::getThreadId): Ditto.
(pthread::thread_init_wrapper): Apply Extract Method to the TLS
setting logic.
(pthread::isGoodObject): Extracted method from various pthread
wrapper calls, for clarity of reading.
(pthread::getsequence_np): Converted from __pthread_getsquence_np.
(__pthread_create): Apply Extract Method to the object validation.
(__pthread_cancel): Ditto.
(__pthread_join): Ditto.
(__pthread_detach): Ditto.
(__pthread_suspend): Ditto.
(__pthread_continue): Ditto.
(__pthread_getschedparam): Ditto.
(__pthread_getsequence_np): Remove.
(__pthread_setschedparam): Apply Extract Method to the object
validation.
(pthreadNull::getNullpthread): New method, return the pthreadNull
object.
(pthreadNull::pthreadNull): Private constructor to prevent accidental
use.
(pthreadNull::~pthreadNull): Prevent compile warnings.
(pthreadNull::create): Override pthread behaviour.
(pthreadNull::exit): Ditto.
(pthreadNull::cancel): Ditto.
(pthreadNull::testcancel): Ditto.
(pthreadNull::setcancelstate): Ditto.
(pthreadNull::setcanceltype): Ditto.
(pthreadNull::push_cleanup_handler): Ditto.
(pthreadNull::pop_cleanup_handler): Ditto.
(pthreadNull::getsequence_np): Ditto.
(pthreadNull::_instance): Ditto.
* thread.h (pthread): Declare pre- and post-create.
Move GetThreadId to private scope and rename to getThreadId.
Move setThreadIdtoCurrent to private scope.
Make create virtual.
Make ~pthread virtual.
Declare initMainThread.
Declare isGoodObject.
Make exit virtual.
Make cancel virtual.
Make testcancel virtual.
Make setcancelstate virtual.
Make setcanceltype virtual.
Make push_cleanup_handler virtual.
Make pop_cleanup_handler virtual.
Declare getsequence_np.
Declare setTlsSelfPointer.
(pthreadNull): New null object class for pthread.
(__pthread_getsequence_np): Remove.
* thread.h (pthread::cleanup_stack): Renamed cleanup_handlers to
cleanup_stack.
* thread.cc (pthread::pthread): Ditto.
(pthread::create): Fixed mutex verification.
(pthread::push_cleanup_handler): Renamed cleanup_handlers to
cleanup_stack.
Mutex calls removed, used InterlockedExchangePointer instead.
(pthread::pop_cleanup_handler): Renamed cleanup_handlers to
cleanup_stack.
(pthread::pop_all_cleanup_handlers): Ditto.
(__pthread_once): Check state first and return if already done.
(__pthread_join): DEADLOCK test reverted to __pthread_equal
call.
(__pthread_detach): Unlock mutex before deletion.
(cygheap_user::env_logsrv): Verify env_domain is valid.
* environ.cc: Include child_info.h and keep spenvs[] sorted.
(environ_init): Check child_proc_info instead of myself->ppid_handle.
* cygwin.din: Add _pthread_cleanup_push and _pthread_cleanup_pop.
* pthread.cc: Change __pthread_self to pthread::self() thruoghout.
(_pthread_cleanup_push): New function.
(_pthread_cleanup_pop): Ditto.
* thread.cc: Thanks to Thomas Pfaff for the pthread cleanup_push,_pop
patch, this work is derived from that.
Change __pthread_self to pthread::self() thruoghout.
(__pthread_self): Rename to pthread::self.
(pthread::self): New method.
(pthread::pthread): Initialize new member.
(pthread::push_cleanup_handler): New method.
(pthread::pop_cleanup_handler): New method.
(pthread::pop_all_cleanup_handlers): New method.
(__pthread_exit): Pop all cleanup handlers.
* thread.h (pthread::push_cleanup_handler): Declare.
(pthread::pop_cleanup_handler): Ditto.
(pthread::pop_all_cleanup_handlers): Ditto.
(pthread::self): New static method.
(__pthread_exit): Give C++ linkage.
(__pthread_join): Ditto.
(__pthread_detach): Ditto.
(__pthread_self): Remove.
2002-04-24 Thomas Pfaff <tpfaff@gmx.net>
* include/pthread.h (__pthread_cleanup_handler): New structure
(pthread_cleanup_push): Rewritten .
(pthread_cleanup_pop): Ditto.
(_pthread_cleanup_push): New prototype.
(_pthread_cleanup_pop) Ditto.
2002-04-24 Thomas Pfaff <tpfaff@gmx.net>
* thread.cc (thread_init_wrapper): Check if thread is already joined.
(__pthread_join): Set joiner first.
(__pthread_detach): Ditto.
* fhandler.h (fhandler_proc::fill_filebuf): Take a pinfo argument.
* fhandler_proc.cc (fhandler_proc::get_proc_fhandler): Simplify search for
given pid.
(fhandler_proc::readdir): Assume that pid exists if it shows up in the winpid
list.
* fhandler_process.cc (fhandler_process::open): Simplify search for given pid.
Call fill_filebuf with pinfo argument.
(fhandler_process::fill_filebuf): Pass pinfo here and assume that it exists.
* pinfo.h (pinfo::remember): Define differently if sigproc.h is not included.
* dll_init.cc (dll_list::detach): Don't run destructor on exit.
where appropriate, throughout. Remove unneeded exceptions.h, where
appropriate, throughout. Remove unneeded perprocess.h, where appropriate,
throughout.
* thread.cc (__pthread_cond_dowait): Fix a race on signalling from a
thread woken by the same condition variable it's signalling on. Thanks
to Michael Beach for the report and test case.
* thread.cc (pthread_cond::Signal): Use a separate flag for signal detection
and broadcast semantics.
(__pthread_cond_dowait): Ditto.
* thread.h (pthread_cond): New flag for testing when a waiter has woken.
* autoload.cc (LoadDLLfuncEx): Auto load TryEnterCriticalSection - its a
n NT only call.
* thread.cc (pthread_cond::TimedWait): Use critical sections for NT.
(pthread_cond::fixup_after_fork): Don't detect bad apps.
(pthread_mutex::pthread_mutex): Use critical sections for NT.
(pthread_mutex::~pthread_mutex): Ditto.
(pthread_mutex::Lock): Ditto.
(pthread_mutex::TryLock): Ditto.
(pthread_mutex::UnLock): Ditto.
(pthread_mutex::fixup_after_fork): Ditto. Also do not detect bad apps.
(__pthread_mutex_trylock): Move WIN32 specific test into the class metho
d.
(__pthread_mutex_destroy): Prevent dereferencing passed pointer without
valid address.
* thread.h (pthread_mutex): Use critical sections for NT.
* dcrt0.cc (cygwin_finished_initializing): Copy _mtinterf on fork;
* fork.cc (fork_child): fixup thread-related structures after fork;
* thread.cc (MTinterface::Init): Initialise the new mutex, condition and semaphore lists.
(MTinterface::fixup_after_fork): Iterate through each list and fixup the objects.
(pthread_cond::pthread_cond): Add this to the condition list.
(pthread_cond::~pthread_cond): Remove this from the condition list.
(pthread_cond::fixup_after_fork): Recreate as best we can the pre-fork state.
(pthread_mutex::pthread_mutex): Add this to the mutex list.
(pthread_mutex::~pthread_mutex): Remove this from the mutex list.
(pthread_mutex::fixup_after_fork): Recreate as best we can the pre-fork state.
(semaphore::semaphore): Store the initial value, and add this to the semaphore list.
(semaphore::~semaphore): Remove this from the semaphore list.
(semaphore::Post): Increment the current semaphore value.
(semaphore::TryWait): Decrement the current semaphore value.
(semaphore::Wait): Ditto.
(semaphote::fixup_after_fork): Recreate the pre-fork state as best we can.
* thread.h (pthread_mutex): New members to allow fixup_after_fork.
(pthread_cond): Ditto.
(semaphore): Ditto.
(MTinterface): New list heads for tracking conds and semaphores.
* dcrt0.cc (set_os_type): Set 'iswinnt' appropriately.
* cygheap.cc (init_cheap): Revert to using VirtualAlloc for allocating cygheap.
(cygheap_setup_for_child_cleanup): New function. Standard function to call
after calling CreateProcess to cleanup cygheap info passed to child.
(cygheap_fixup_in_child): Copy cygheap from shared memory into allocated space
under Windows 9x or if can't relocate shared space under NT.
* cygheap.h: Declare new function.
* spawn.cc (spawn_guts): Use cygheap_fixup_in_child.
* fork.cc (fork_parent): Ditto.
* winsup.h: Declare iswinnt.
* thread.cc (verifyable_object_isvalid): Don't validate
PTHREAD_MUTEX_INITIALIZER pointer as it will cause an exception
in IsBadWritePtr() when running GDB.
* path.cc (path_conv::check): Add signal protection here since retrieving info
about remote shares can take some time.
* path.h (check_null_empty_str_errno): Convert to a function prototype.
* path.cc (check_null_empty_str): Move to miscfuncs.cc.
* miscfuncs.cc (check_null_empty_str_errno): New function.
(__check_null_invalid_struct): Ditto.
(__check_null_invalid_struct_errno): Ditto.
(check_null_empty_str): Change from VirtualQuery to IsBadWritePtr.
* thread.cc (check_valid_pointer): Ditto.
* resource.cc (getrlimit): Use check_null_invalid_struct macro for checking
validity of pointer.
(setrlimit): Ditto.
* thread.cc (pthread_cond::TimedWait): Check for WAIT_TIMEOUT as well as
WAIT_ABANDONED.
(__pthread_cond_timedwait): Calculate a relative wait from the abstime
parameter.
* thread.cc (__pthread_cond_timedwait): Lock the waiting mutex before
the condition protect mutex to avoid deadlocking. (Found by Greg Smith).
(__pthread_cond_wait): Ditto.
mutexs - user programs are allowed to call pthread_cond_broadcast like that.
(__pthread_cond_timedwait): Initialise themutex properly.
(__pthread_cond_wait): Initialise themutex properly.
* thread.h (pthread_cond): New element cond_access to allow atomic broadcasts.
* thread.cc (pthread_cond::pthread_cond): Initialise cond_access.
(pthread_cond::~pthread_cond): Destroy cond_access.
(pthread_cond::Broadcast): Use cond_access.
(pthread_cond::Signal): Use cond_access.
(pthread_cond_wait): Use cond_access.
(pthread_cond_timedwait): Use cond_access.
* pinfo.h: Correctly set __SIGOFFSET.
* path.cc (hash_path_name): Avoid calling library functions for simple copying
of characters.
* shortcut.c: Use WIN32_LEAN_AND_MEAN.
* smallprint.c: Ditto.
* environ.cc (getwinenv): Minor clarity fix.
* localtime.c: No need to include windows.h
* string.h: New file.
structure of newlib.
* sigproc.h (sig_send): Add exception parameter to sig_send.
* sigproc.cc (sig_send): Ditto. Use it when setting frame info.
* exceptions.cc (handle_exceptions): Use exception flag when calling sig_send.
* thread.h (MTinterface): Add threadcount.
* thread.cc (MTinterface::Init): Set threadcount to 1.
(__pthread_create): Increment threadcount.
(__pthread_exit): Decrement threadcount and call exit() from the last thread.
(fork_parent): Call the __pthread_atforkparent function.
* cygwin.din: Export pthread_atfork.
* thread.h (callback): New class.
(MTinterface): Use it.
* thread.cc (__pthread_atforkprepare): New function.
(__pthread_atforkparent): New function.
(__pthread_atforkchild): New function.
(__pthread_atfork): New function.
* pthread.cc (pthread_atfork): New function.
* cygwin.din: Remove @PTH_ALLOW@ prefixes to pthread functions.
Add new pthread exports.
* pthread.cc: New wrapper functions for the above new exports.
* sched.cc (valid_sched_parameters): New function.
(sched_setparam): Use it.
(sched_set_thread_priority): New function. Used by pthread_sched*.
* thread.cc (pthread_key_destructor::InsertAfter): New function.
(pthread_key_destructor::UnlinkNext): New function.
(pthread_key_destructor::Next): New function.
(pthread_key_destructor_list::Insert): New function.
(pthread_key_destructor_list::Remove): New function.
(pthread_key_destructor_list::Pop): New function.
(pthread_key_destructor::pthread_key_destructor): New function.
(pthread_key_destructor_list::IterateNull): New function.
(MTinterface::Init): Initialise new member.
(pthread::pthread): Initialise new members.
(pthread::create): Copy new attributes. Set the new thread priority.
(pthread_attr::pthread_attr): Initialise new members.
(pthread_key::pthread_key): Setup destructor function.
(pthread_key::~pthread_key): Remove destructor function.
(pthread_mutexattr::pthread_mutexattr): New function.
(pthread_mutexattr::~pthread_mutexattr): New function.
(__pthread_once): New function.
(__pthread_cleanup): New function.
(__pthread_cancel): New function.
(__pthread_setcancelstate): New function.
(__pthread_setcanceltype): New function.
(__pthread_testcancel): New function.
(__pthread_attr_getinheritsched): New function.
(__pthread_attr_getschedparam): New function.
(__pthread_attr_getschedpolicy): New function.
(__pthread_attr_getscope): New function.
(__pthread_attr_setinheritsched): New function.
(__pthread_attr_setschedparam): New function.
(__pthread_attr_setschedpolicy): New function.
(__pthread_attr_setscope): New function.
(__pthread_exit): Call any key destructors on thread exit.
(__pthread_join): Use the embedded attr values.
(__pthread_detach): Use the embedded attr values.
(__pthread_getconcurrency): New function.
(__pthread_getschedparam): New function.
(__pthread_key_create): Pass the destructor on object creation.
(__pthread_key_delete): Correct incorrect prototype.
(__pthread_setconcurrency): New function.
(__pthread_setschedparam): New function.
(__pthread_cond_timedwait): Support static mutex initialisers.
(__pthread_cond_wait): Ditto.
(__pthread_mutex_getprioceiling): New function.
(__pthread_mutex_lock): Support static mutex initialisers.
(__pthread_mutex_trylock): Ditto.
(__pthread_mutex_unlock): Ditto.
(__pthread_mutex_destroy): Ditto.
(__pthread_mutex_setprioceiling): New function.
(__pthread_mutexattr_getprotocol): New function.
(__pthread_mutexattr_getpshared): New function.
(__pthread_mutexattr_gettype): New function.
(__pthread_mutexattr_init): New function.
(__pthread_mutexattr_destroy): New function.
(__pthread_mutexattr_setprotocol): New function.
(__pthread_mutexattr_setprioceiling): New function.
(__pthread_mutexattr_getprioceiling): New function.
(__pthread_mutexattr_setpshared): New function.
(__pthread_mutexattr_settype): New function.
Remove stubs for non MT_SAFE compilation.
* thread.h: Remove duplicate #defines.
Add prototypes for new functions in thread.cc.
(pthread_key_destructor): New class.
(pthread_key_destructor_list): New class.
(pthread_attr): Add new members.
(pthread): Remove members that are duplicated in the pthread_attr class.
(pthread_mutex_attr): Add new members.
(pthread_once): New class.
* include/pthread.h: Add prototypes for new functions exported from cygwin1.dll.
Remove typedefs.
* include/sched.h: Add prototypes for new functions in sched.cc.
* include/cygwin/types.h: Add typedefs from pthread.h
it.
* cygwin.din: Remove obsolete "__empty" export.
* exceptions.cc (call_signal_handler_now): Force inclusion of function even
when -finline-functions is specified.
* sigproc.h: Remove obsolete call_signal_handler declaration.
* fhandler_console.cc (cp_get_internal): New function.
(cp_convert): New function.
(con_to_str): New function.
(str_to_con): New function.
(fhandler_console::read): Replace OemToCharBuff with con_to_str.
(fhandler_console::write_normal): Replace CharToOemBuff with str_to_con.
* pthread.cc (pthread_cond_*): Add wrapper functions that call __pthread_cond*
functions.
* thread.cc (__pthread_cond_*): Implement the pthread_cond* functions.
* thread.h: Add new class entries and prototypes for __pthread_cond* functions.
* include/pthread.h: user land header prototypes for pthread_cond* functions
and related defines.
* thread.cc (MTinterface::Init): Remove the initialization of `reent_data'.
* dcrt0.cc: Add the initalizer to the declaration of `reent_data'.
* include/cygwin/version.h: Bump CYGWIN_VERSION_API_MINOR to 35.
* environ.cc (codepage_init): To here.
* exceptoins.cc (SIG_NONMASKABLE): Remove SIGCONT from consideration since it
is supposed to be maskable.
* signal.cc (sigaction): Ditto.
* sigproc.cc (wait_sig): Ditto.
* winsup.h: Eliminate global declaration of codepage_init.
* dcrt0.cc (dll_crt0_1): Call signal_fixup_after_exec where appropriate. Set
myself->uid from parent version. Just use ThreadItem Init method. Close or
store hexec_proc as appropriate.
(_dll_crt0): Store user_data->forkee here so that proper tests can be made
subsequently.
(do_exit): Remove hExeced stuff.
* environ.cc (environ_init): Accept environ count as well as environ pointer.
* environ.h: Reflect above change.
* pinfo.cc (pinfo_init): Ditto. Accept environ count.
(fixup_in_spawned_child): Remove.
* spawn.cc (spawn_guts): Move signal code to dll_crt0_1. Don't suspend execing
process since it is no longer necessary. Store envc.
* exceptions.cc (signal_fixup_after_exec): New function.
(call_handler): Remove hExeced test.
* child_info.h (cygheap_exec_info): Store envc as well as envp.
(child_info_spawn): Store hexec_proc so that it can be closed in child.
* path.cc (normalize_posix_path): Avoid intermediate use of temporary cwd buf.
(normalize_win32_path): Ditto.
(cwdstuff::get_initial): Always set lock.
* sigproc.h: Remove hExeced.
* strace.cc (strace::vsprntf): Modify to accomodate for lack of hExeced.
* thread.cc (MTinterface::Init): Merge Init1 and ClearReent into this method.
(MTinterface::Init1): Eliminate.
(MTinterface::ClearReent): Eliminate.
* thread.h: Reflect above changes.
* include/sys/strace.h (strace): Make microseconds() public. Make various
functions 'regparm', throughout.
* pinfo.h (_pinfo): Inline simple signal manipulation functions. Requires
inclusion of thread.h which was removed from .cc files, where appropriate.
throughout.
* pinfo.cc: Eliminate signal manipulation functions.
(_pinfo::exit): Calculate total rusage for exiting process here.
* cygheap.cc (size2bucket): Eliminate.
(init_buckets): Ditto.
(_cmalloc): Calculate size and bits in a loop rather than going through a
function call.
(_crealloc): Use stored array index to calculate allocated size.
* spawn.cc (spawn_guts): Use _pinfo exit method to exit, calculating cpu usage.
throughout.
* shared.h: Remove.
* cygwin_version.h: New file.
* delqueue.h: New file.
* environ.h: New file.
* host_dependent.h: New file.
* perprocess.h: New file.
* registry.h: New file.
* security.h: New file.
* child_info.h: Add specific exec class.
* cygheap.h: New file. Contains declarations for cygwin heap.
* cygheap.cc: New file. Implements cygwin heap functions.
* dcrt0.cc (quoted): Simplify due to new method for passing arguments between
cygwin programs.
(alloc_stack_hard_way): Attempt to handle overlapped stack.
(dll_crt0_1): Move child_info processing here. Accomodate new method for
passing arguments between cygwin programs. Initialize cygwin heap. Establish
__argc and __argv variables.
(_dll_crt0): Move most of child_info processing to dll_crt0_1.
(cygwin_dll_init): Remove duplication.
* dtable.cc (dtable::extend): Allocate dtable using cygwin heap.
(dtable::build_fhandler): Ditto for fhandler type being constructed.
(dtable::dup_worker): Free new fhandler from cygwin heap on error.
(dtable::select_*): Don't assume that this == fdtab.
(dtable::linearize_fd_array): Delete.
(dtable::delinearize_fd_array): Delete.
(dtable::fixup_after_exec): New file.
(dtable::vfork_child_dup): Use cygwin heap.
(dtable::vfork_parent_restore): Ditto.
* dtable.h: Remove obsolete methods. Add new method.
* environ.cc (posify): Eliminate already_posix parameter and logic.
(envsize): New function.
(_addenv): Use envsize.
(environ_init): Accept an argument pointing to an existing environment list.
If supplied, allocate space for this in the the program's heap.
* fhandler.cc (fhandler_base::operator =): Move here from fhandler.h. Use
cygwin heap to allocate filenames.
(fhandler_base::set_name): Allocate/free names from cygwin heap.
(fhandler_base::linearize): Delete.
(fhandler_base::de_linearize): Delete.
(fhandler_base::operator delete): Free from cygwin heap.
(fhandler_base::~fhandler_base): Ditto.
* fhandler.h: Accomodate elimination of *linearize and other changes above.
* fhandler_console.cc (fhandler_console::fixup_after_exec): Rename from
de_linearize.
* heap.h: New file.
* fhandler_tty.cc (fhandler_tty_slave::fhandler_tty_slave): Use cygwin heap for
name. fhandler_tty::fixup_after_exec): Rename from de_linearize.
* fork.cc (fork): Call cygheap_fixup_in_child.
* heap.cc: Use declarations in heap.h.
* malloc.cc: Sprinkle assertions throughout to catch attempts to free/realloc
something from the cygwin heap.
* path.cc: Throughout, eliminate use of per-thread cache for cwd. Use cwd_*
functions rather than cwd_* variables to access cwd_win32 and cwd_posix.
(cwd_win32): New function.
(cwd_posix): New function.
(cwd_hash): New function.
(cwd_fixup_after_exec): New function.
* path.h: Accomodate path.cc changes.
* pinfo.cc (pinfo_init): Accept a pointer to an environment table. Pass this
to environ_init. Eliminate old 'title' tests.
* pinfo.h: Accomodate above change in argument.
* spawn.cc (struct av): New method for building argv list.
(av::unshift): New method.
(spawn_guts): Allocate everything that the child process needs in the cygwin
heap and pass a pointer to this to the child. Build argv list using new
method. Eliminate delinearize stuff.
* thread.h: Eliminate _cwd_win32 and _cwd_posix buffers.
* winsup.h: Eliminate obsolete functions. Add envsize() declaration.
since we are already bounds checked by default.
* thread.cc (ResourceLocks::Lock): Streamline this function since it is called
a lot.
(ReleaseResourceLock): Ditto.
* *.cc: put winsup.h before other headers (for __INSIDE_CYGWIN__);
use cur_environ() instead of just environ
* times.cc: remove import protections
* glob.c: add winsup.h
* localtime.c: ditto
* smallprint.c: ditto
* Makefile.in: don't __INSIDE_CYGWIN__ as it messes up profiling.
appropriate.
(LIBCOS): Find additional stub library stuff in their own subdirectory.
* dcrt0.cc: Convert user_data pointer to static __cygwin_user_data area.
(do_global_ctors): Check magic_bisquit for initialization.
(dll_crt0_1): First group of premain functions prior to fd initialization. Run
second group before calling main.
(dll_crt0 ()): New function, called from new initialization code.
(dll_crt0 (per_process *uptr)): Call new dll_crt0 () function on
initialization.
* debug.cc (thread_stub): Initialize bottom of stack with per-thread info.
* environ.cc (parse_thing): Use binmode global to control CYGWIN=binmode
behavior.
* fhandler.cc (fhandler_base::open): Allow explicit setting of __fmode to
O_BINARY or O_TEXT to override disk mount settings.
* libcmain.cc: Move to lib subdirectory.
* libccrt0.cc: Ditto.
* dll_main.cc: Ditto.
* dll_entry.cc: Ditto.
* getopt.c: Ditto.
* thread.cc (thread_init_wrapper): Call ExitThread explicitly rather than
returning, as a preliminary step towards placing per thread info at the bottom
of the stack.
* winsup.h: Move per_process class to include/sys/cygwin.h. Declare new
dll_crt0().
* include/cygwin/version.h: Bump API minor version.
* binmode.c: New file.
* textmode.c: Ditto.
* lib/_cygwin_crt0_common.cc: Ditto.
* lib/crt0.h: Ditto.
* lib/cygwin_attach_dll.c: Ditto.
* lib/cygwin_crt0.c: Ditto.
* lib/dll_entry.cc: Ditto.
* lib/dll_main.cc: Ditto.
* lib/getopt.c: Ditto.
* lib/libcmain.c: Ditto.
* lib/premain0.c: Ditto.
* lib/premain1.c: Ditto.
* lib/premain2.c: Ditto.
* lib/premain3.c: Ditto.
referring to something like c:\.
* dcrt0.cc (dll_crt0_1): Move uinfo initialization prior to sig_send
initialization to give signal thread a chance to finish.
* debug.cc (WFSO): Move to sigproc.cc
(WFMO): Ditto.
* exceptions.cc (interruptible): Allocate slightly more space for directory
just for paranoia's sake.
(call_handler): Eliminate nonmain argument. Determine if main thread has set a
frame pointer and use it if so.
(sig_handle): Eliminate nonmain argument.
* net.cc: Record frame information in appropriate routines throughout.
* select.cc (select): Ditto.
* sigproc.cc: Use sigthread structure to record mainthread id throughout.
(sig_send): Record frame information for signal handler.
(wait_sig): Reflect argument change in sig_handle.
(WFSO): Move here and record frame information for signal handler.
(WFMO): Ditto.
* sigproc.h: Implement new "sigthread" class. Implement "sigframe" class for
manipulating signal frame info.
* thread.cc (__pthread_kill): Use standard _kill() function rather than calling
sig_send directly.
* winsup.h: Eliminate ebp element from signal_dispatch class.
Christopher Faylor
Corinna Vinschen
Thomas Pfaff
Robert Collins
Egor Duda
DJ Delorie