After using fork(), arc4random does not reseed itself, which
causes the results to become predictable. Activate droppingfork-recognition
Fixes: e0fc33322d ("Delete Cygwin's arc4random in favor of new Newlib implementation")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far the global variable in_forkee only indicated if the
process is the child process during fork(2) itself.
However, we need an indicator accessible from plain C code
in newlib, allowing to check for a process being a forked
process all the time, after fork(2) succeeded.
Redefine bool in_forkee to int __in_forkee to allow exposing
it to newlib. Redefine how it indicates fork state (not
forked, forking, forked).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If pthread_once() is called with pthread_once_t initialized using
PTREAD_ONCE_INIT, pthread_once does not release pthread_mutex used
internally. This patch fixes that by calling pthread_mutex_destroy()
in the thread which has called init_routine.
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
A process which is exiting due to a core dumping signal doesn't
propagate the correct exist status after dumping core, because 'dumper'
itself forcibly terminates the process.
Use 'dumper -n' to avoid killing the dumped process, so we continue to
the end of signal_exit(), to exit with the 128+signal exit status.
Busy-wait in exec_prepared_command() in an attempt to reliably notice
the dumper attaching, so we don't get stuck there.
Also: document these important facts for custom uses of error_start.
Avoid a recursive make to speed things up a bit.
A cr16-elf build shows installed objects & libs produce same code.
The test targets were dropped as they didn't actually work -- there
is no test.o rule in here.
This patch is required to fix how the newlib headers are installed
when using a sysroot install directory.
The cross compiler expects headers to be in
.../host/usr/arm-none-eabi/sysroot/usr/include/newlib.h
by default newlib installed the headers into
.../host/usr/arm-none-eabi/sysroot/usr/arm-none-eabi/include/newlib.h
${exec_prefix} provides the .../host/usr/arm-none-eabi/sysroot path
${target_noncanonical} provides an extra arm-none-eabi/ that must be removed.
With this patch, users can specify the tooldir path that is needed.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Co-developed-by: Chris Wardman <cjwfirmware@vxmdesign.com>
Strip a few more instructions from crt0-minrt.S:
- Remove "halt" and rely on the infinite loop after main()'s return.
- Remove main()'s argc and argv argument initialization. Host loader
does not set them, and typical firmware does not use them, either.
- Remove the __dso_handle symbol.
This should be safe because the default crt0.S is fully standards
compliant. Whereas crt0-minrt.S has been documented from the beginning
to intentionally miss features in order to reduce firmware size, while
still enabling typical PRU firmware to operate.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
Avoid a recursive make to speed things up a bit. This change was
inspired by the recent similar patch for c6x:
https://sourceware.org/pipermail/newlib/2023/020869.html
While at it, fork crt0-minrt.S into a separate source file instead of
relying on a predefined macro to generate two different object files.
This improves clarity, simplifies the build rules, and would allow
further optimization in crt0-minrt.S to be implemented more cleanly.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
Commit 3f3bd10104 ("* Throughout, use __try/__except/__endtry blocks [...]")
introduced setting EINVAL, marked as "Diagnosis". The reason
for this is lost in time and space, but looks very much like
a debug helper which was supposed to be removed before release.
It's rather pointless, so remove it.
Fixes: 3f3bd10104 ("* Throughout, use __try/__except/__endtry blocks [...]")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
When creating a split manual with one-node-per-page, the main index.html
ends up getting clobbered by the page for the index() function because
it uses "@node index" which, for html, also creates an index.html page.
To remedy this, add "Function " to every function node so now we output
"Function-index.html" and avoid clobbering. It also namespaces every
other function and helps make sure we don't clobber anything else.
Otherwise, there isn't really much rendering difference as @node text
is mostly internal. Node title text comes from @section instead.
The generated function documentation makes sure to include entries for
every function in the function index via @findex, but then the manuals
forget to actually print the index.
Wrapping the dir info with @ifnottex means it's included in all other
outputs like html which makes no sense. Switch to @direntry which is
specific for this content and is automatically written to the output
that makes sense, and omitted from the rest.
First off, afaict, xc16x support has never been merged into gcc.
Upstream merge isn't strictly required for new ports, but it seems
like people should merge eventually in some shape, and considering
the libgloss port was merged in 2009, ~14 years seems like plenty
of leeway. Which is to say, no one else can seem to build this
which makes updating & testing things very difficult.
Ignoring that, from what I can tell, this port has only ever built
and installed a crt0.o file. It defines libeval.a & libcygmon.a
targets, but nothing depends on them. The SCRIPTS & BSP variables
are always empty. The original port merge define these in the
configure script as substitutes, but never set the vars, so they
were always replaced with nothing.
I actually broke this build 2 years ago when merging the configure
up a level in commit 30f244155b
("libgloss: merge subdirs that have unique makefile_frags up a
level"). I saw that it was exporting a bunch of vars in the
configure script, but never set them, so I incorrectly assumed
they weren't used. Which means the Makefile has been setting them
to invalid values like literal @bsp_list@ and @script_list@.
Considering no one has complained, I have to assume no one cares
about this port, and we can all stop wasting time on it.
Fix a compile error due to duplicate pthreads types:
.../libgloss/sparc_leon/mutex.c:50:8: error: conflicting types for ‘pthread_mutex_t’; have ‘struct pthread_mutex’
50 | } pthread_mutex_t;
In file included from .../newlib/libc/include/sys/types.h:221,
from .../libgloss/sparc_leon/mutex.c:26:
.../newlib/libc/include/sys/_pthreadtypes.h:154:20: note: previous declaration of ‘pthread_mutex_t’ with type ‘pthread_mutex_t’ {aka ‘long unsigned int’}
154 | typedef __uint32_t pthread_mutex_t; /* identify a mutex */
.../libgloss/sparc_leon/mutex.c:57:8: error: conflicting types for ‘pthread_mutexattr_t’; have ‘struct <anonymous>’
57 | } pthread_mutexattr_t;
../newlib/libc/include/sys/_pthreadtypes.h:169:3: note: previous declaration of ‘pthread_mutexattr_t’ with type ‘pthread_mutexattr_t’
169 | } pthread_mutexattr_t;
Avoid a recursive make to speed things up a bit.
A ft32-elf build shows installed objects & libs produce same code.
Mention of ft32-elf-common.ld is dropped as it has never existed
in the tree, and has been an (ignored) error in the past.
This is a .c file, not assembly, and it's a duplicate (same content)
as the existing sim-lseek.c. Delete it since it's unused and doesn't
actually compile.
Avoid a recursive make to speed things up a bit.
A fr30-elf build shows installed objects & libs produce same code.
A lot of code seems like it hasn't been migrated, but that's because
it's all disabled/unused (i.e. all the test & mon code). It looks
like a lot of copy & paste holdovers from the original port.
No sub-Makefile.inc file should ever set CPPFLAGS directly. That is
a global/common variable. Instead, ports should set the per-target
CPPFLAGS to include what they need.
Further, per-target CPPFLAGS should respect $(AM_CPPFLAGS).
The code was loading the common ../sbrk.c file rather than the visium
specific sbrk.c due to VPATH setup. Add an explicit rule for this one
file so we make sure the correct one is used.
Avoid a recursive make to speed things up a bit.
A i386-elf build shows installed objects & libs produce same code other
than a rename from cygmon-gmon.o & cygmon-salib.o to i386_libcygmon_a-*.o
due to the use of custom CPPFLAGS in here.
This was added to specify -Wa,-gdwarf2 when compiling the assembly
files. Considering the size of these .S files, it seems unnecessary
overkill and complicates the build system. All but one of these
compile down to 6 or fewer lines, and those hardly need extra debug
for anyone who is poking msp430 assembly. The 1 file that is larger
than that (crt_move_highdata.S) is still <15 insns.
This will also simplify merging it into the top-level Makefile.
The build system compiles crt0.S many times to produce independent
object files by defining different -DLxxx symbols for each. This
complicates the build, and has led to some bugs in the source and
build (see the previous cleanup commits in here). The crt_bss.S
file has also been duplicated with crt0.S leading to confusion as
to which one is the "real" one. The only reason to keep them in
one file is to make management of the section numbers when calling
START_CRT_FUNC a little easier, but that seems trivial to check
with a quick grep across all the files.
Considering how complicated the build is now, and the bugs we've
had as a result, split the crt0.S file up into multiple source
files so we don't have to compile it multiple times. This will
also simplify merging it into the top-level Makefile.
This object is created by compiling crt0.S with -DLinit, but there
has never been an "#if Linit" check in crt0.S, so this has always
produced a stub object file. Drop compiling it entirely.
The #if 0 & comment imply this code doesn't exist and is never used,
except there's another #if Lrun_fini_array section below which *does*
define this function, which makes this code comment confusing. This
seems to be a hold over of the cleanup of the minrt code in the old
commit 884b05b54e ("MSP430: Remove
.init/.fini sections").
This logic is copied from what's used in newlib today. This allows
subdirs to easily define per-directory flags & per-file flags without
having to setup unique automake rules for each one.
A bunch of ports have manual rules to generate disassembly, srec, and
binary files from test programs. Add top-level pattern rules so every
test program gets this for free, and we don't have to duplicate it in
every subdir.
Corinna Vinschen
Jon Turney
Mike Frysinger
Takashi Yano
Neal Frager
Dimitar Dimitrov
Jeff Johnston