collision with large data areas.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Accommodate changes to
open_shared arguments.
* fhandler_tape.cc (mtinfo_init): Ditto.
* pinfo.cc (pinfo::init): Use open_shared rather than win32 mmap calls.
* shared.cc (user_shared_initialize): Ditto.
(memory_init): Ditto.
(open_shared): Change to allow use a smore general mmap handler.
* shared_info.h (shared_locations): Add SH_JUSTCREATE, SH_JUSTOPEN.
(open_shared): Change declaration to match new usage.
* autoload.cc (LoadDLLfuncEx2): Define in terms of LoadDLLfuncEx3.
(LoadDLLfuncEx3): New macro.
* fhandler.h (fhandler_pipe::create_selectable): Declare.
(fhandler_fifo::close_one_end): Declare.
* fhandler_fifo.cc (fhandler_fifo::close_one_end): Define.
(fhandler_fifo::open_not_mine): Use close_one_end to close appropriate end of
pipe.
* pinfo.cc (_pinfo::commune_recv): Ditto.
* pipe.cc (fhandler_pipe::create_selectable): Rename from
create_selectable_pipe. Reorganize.
(fhandler_pipe::create): Use create_selectable.
* sync.h (locker): New, currently unused class.
(muto::init): Eliminate.
* sync.cc (muto::init): Ditto.
(muto::init): Eliminate critical section lock and instead use name as a guard
to prevent against multiple attempts to initialize the same muto.
* pinfo.cc (pinfo::init): Set myself procinfo when not execing and pid matches
windows pid or cygwin pid.
* pinfo.cc (_pinfo::set_ctty): to here.
* fhandler_mem.cc (fhandler_dev_mem::fstat): Don't fill out structure if this
is an on-disk device rather than an "auto" device.
* fhandler_raw.cc (fhandler_dev_raw::fstat): Ditto.
* path.cc (normalize_posix_path): Don't treat a standalone '//' as introducing
a UNC path.
(normalize_win32_path): Ditto.
* pinfo.h (_pinfo::exists): Declare "new" function.
(_pinfo::kill): Ditto.
* fhandler_termios.cc (tty_min::kill_pgrp): Use _pinfo::exists rather than
proc_exists.
* pinfo.cc (pinfo::init): Ditto. Don't do a low_priority_sleep(0) when looping
to find exec'ed procinfo.
(pinfo::release): Be more careful about unmapping and closing.
* signal.cc (_pinfo::kill): Rename from kill_worker. Accommodate entry into
_pinfo class.
(kill0): Use _pinfo::kill rather than kill_worker.
(kill_pgrp): Ditto. Use _pinfo::exists rather than proc_exists.
* sigproc.cc (_pinfo::exists): Rename from proc_exists.
(pid_exists): Use _pinfo::exists rather than proc_exists.
(remove_proc): Ditto.
* sigproc.h (proc_exists): Delete declaration.
(cygthread::terminate_thread): Eliminat racy code which reset ev and
thread_sync. Remove a few nonsensical inuse checks. Exit at the bottom.
(cygthread::detach): Rewrite to again try to ensure that we don't say we're
signalled when we are not signalled.
* fhandler.cc (fhandler_base::raw_read): Revert to signalling read success
quickly.
* pipe.cc (fhandler_pipe::close): Use base method to close handle.
* sigproc.h (WAIT_SIG_PRIORITY): Just trundle along at normal priority to allow
the pipe thread to do its thing if possible.
* pinfo.h (pinfo::zap_cwd): Declare new function.
(pinfo::zap_cwd): Move 'cd out of the way code' here.
(pinfo::exit): Use it here.
* spawn.cc (spawn_guts): And here.
"device:" entry.
* fhandler.h (fhandler_socket::open): New method.
(fhandler_pipe::open): New method.
* fhandler_proc.cc (fhandler_proc::exists): Return -2 in case of
/proc/self.
* fhandler_process.cc (fhandler_process::exists): Return -2 in
case of symlinks, -3 for pipes and -4 for sockets.
(fhandler_process::fstat): Handle pipes and sockets.
(fhandler_process::open): Handle opening /proc/<pid>/fd.
(fhandler_process::fill_filebuf): Generate empty names for
non exisiting file descriptors.
* fhandler_socket.cc (fhandler_socket::get_proc_fd_name): Always
generate "socket:[number]" strings as on Linux.
(fhandler_socket::open): New method.
(fhandler_socket::fstat): Always return socket type.
* path.cc (symlink_info::set): Remove unused second parameter.
(path_conv::check): Handle pipes and sockets in /proc.
Set correct device type for AF_LOCAL sockets.
* pinfo.cc (_pinfo::commune_recv): Generate empty names for
non exisiting file descriptors.
(_pinfo::fd): Ditto.
* pipe.cc (fhandler_pipe::open): New method.
fhandlers.
* dtable.h (class dtable): Add cygheap_fdenum as friend class.
* fhandler.h (fhandler_base::get_proc_fd_name): New virtual method
to return a name for /proc/<pid>/fd.
(fhandler_socket::get_proc_fd_name): Ditto.
(fhandler_pipe::get_proc_fd_name): Ditto.
(fhandler_virtual::opendir): Make virtual method.
(fhandler_process::opendir): New method.
* fhandler.cc (fhandler_base::get_proc_fd_name): New method.
* fhandler_process.cc: Include ctype.h.
(PROCESS_FD): Define.
(process_listing): Add "fd".
(fhandler_process::exists): Fix comment. Return 1 in case of "fd"
directory. Handle files below "fd".
(fhandler_process::fstat): Drop "self" handling. Set correct link
count for directories.
(fhandler_process::opendir): New method to handle "fd" directory.
(fhandler_process::readdir): Add "fd" handling.
(fhandler_process::open): Drop "self" handling.
(fhandler_process::fill_filebuf): Ditto. Add "fd" handling. Fix
"maps" output string.
* fhandler_registry.cc (fhandler_registry::fstat): Set correct link
count for directories.
* fhandler_socket.cc (fhandler_socket::get_proc_fd_name): New method.
* path.cc (symlink_info::set): Fix thinko.
* pinfo.cc (_pinfo::commune_recv): Rename pathbuf to path throughout.
Drop local path variable in PICOM_FIFO case. Fix debug output.
Close handles as early as possible. Add PICOM_FDS and PICOM_FD
handling.
(_pinfo::commune_send): Add PICOM_FDS and PICOM_FD handling.
(_pinfo::fd): New method.
(_pinfo::fds): New method.
* pinfo.h (enum picom): Add PICOM_FDS and PICOM_FD.
(_pinfo::fd): Declare.
(_pinfo::fds): Declare.
* pipe.cc (fhandler_pipe::get_proc_fd_name): New method.
throughout.
* pinfo.cc (set_myself): Pass INVALID_HANDLE_POINTER if h is NULL.
(pinfo::init): Make third parameter non-optional. Eliminate use of PID_EXECED
as an argument. Put setting of handle back inside loop but reorganize to try
to open it only when necessary.
* fork.cc (fork_parent): Copy parent's nice value into child.
* spawn.cc (spawn_guts): Ditto.
* miscfuncs.cc (winprio_to_nice): New function.
(nice_to_winprio): Ditto.
* pinfo.cc (pinfo_init): If parent is not a Cygwin process, set
default nice value according to current Win32 priority class.
* pinfo.h (class _pinfo): Add nice member.
* syscalls.cc (setpriority): New function, only implementing
PRIO_PROCESS for now.
(getpriority): Ditto.
(nice): Just call setpriority.
* wincap.h (wincaps::has_extended_priority_class): New element.
* wincap.cc: Implement above element throughout.
* winsup.h: Add prototypes for winprio_to_nice and nice_to_winprio.
* include/limits.h (NZERO): New define.
* include/cygwin/types.h (id_t): New datatype.
* include/cygwin/version.h: Bump API minor version.
* include/sys/resource.h: Add PRIO_XXX defines and prototypes for
getpriority and setpriority.
loop since trying multiple times to call CreateFileMapping doesn't make much
sense. Try to structure the loop a little better so that exiting with a break
does the right thing.
(pinfo::release): Release shared memory area if it exists and close handle if
it exists.
has exited before getting an error code.
(pinfo::exit): "cd" to innocuous location before exiting to make sure that
process does not keep the current working directory busy while it is in the
process of really exiting.
* pinfo.cc (pinfo::exit): Use renamed function.
(proc_waiter): Ditto. Make a copy of input argument to avoid problems when
procs array is shuffled. Flag when copy is made so that remove_proc knows when
it is safe to reshuffle.
* sigproc.cc (proc_terminate): Don't flag process_state as PID_EXITED.
(remove_proc): Wait for waiter to finish copying pinfo element before moving it
(an actual wait should be an extremely rare event).
* include/sys/cygwin.h: Remove PID_ZOMBIE.
* pinfo.h: Rename EXITCODE_* defines.
(pinfo::set_exit_state): Remove parameter.
* pinfo.cc (set_exit_state): Remove parameter. Reverse sense of test so that
exitcode is checked for having been set rather than not having been set. Set
flag when exitcode has been established. Don't set PID_STATE here.
(pinfo::init): Remove exitcode initialization.
(pinfo::exit): Reflect change in EXITCODE_* naming. Set flag when exitcode has
been established. Reflect change in arguments to set_process_state.
(proc_waiter): Reflect change in arguments to set_process_state. Set
process_state here and only here.
* fhandler_process.cc (fhandler_process::fill_filebuf): Reflect removal of
PID_ZOMBIE define.
(format_process_stat): Ditto.
(format_process_status): Ditto.
* sigproc.cc (pid_exists): Ditto.
(stopped_or_terminated): Ditto. Make sure that only low-order 16 bits of
exitcode are used.
* spawn.cc (spawn_guts): Reflect change in EXITCODE_* naming.
* fhandler.h (select_record::thread_errno): Save any encountered errno here.
(select_record::set_select_errno): New function.
(select_record::saw_error): New function.
(select_record::select_record): Initialize thread_errno to zero.
* select.cc (set_handle_or_return_if_not_open): Set thread_errno on failure.
(select_stuff::wait): Record errno for later resurrection in calling thread.
(peek_serial): Ditto.
(pinfo::exit): Move here from _pinfo::exit.
* sigproc.cc (child_info::sync): Use new function to set exitcode and
process_state.
* pinfo.cc (_pinfo::exit): Ditto.
(proc_waiter): Ditto.
(_pinfo::set_exit_state): Define new function.
(_pinfo::dup_proc_pipe): Close handle when there is no parent process around to
care about the exit value.
* dcrt0.cc (dll_crt0_0): Move subproc_ready synchronization later to make sure
that myself is still mapped in parent.
(do_exit): Reflect movement to pinfo::exit.
(__api_fatal): Ditto.
* exceptions.cc (signal_exit): Ditto.
* errno.cc (errmap): Map PROC_NOT_FOUND.
* init.cc (dll_entry): Release myself before exiting.
* sigproc.cc (proc_can_be_signalled): Set errno appropriately.
(sig_send): Ditto. Also remove ill-advised test for !myself->sendsig since
this is an indication of a process which is still initializating -- it is not
an error.
(child_info::sync): Don't set exitcode here. Assume that will happen in
proc_waiter, if necessary.
* spawn.cc (spawn_guts): Delay "wait_for_myself" logic until later. Don't wait
at all if the process has already exited. Reflect movement to pinfo::exit.
(cygthread::cygthread): Ditto.
(cygthread::terminate_thread): Ditto. Move inuse test earlier or suffer
infinite loop.
* pinfo.cc (_pinfo::dup_proc_pipe): Close handle if DuplicateHandle fails and
process no longer exists.
* spawn.cc (spawn_guts): Create process in suspended state if OS demands it.
* wincap.cc: Add "start_proc_suspended" throughout.
* wincap.h (wincaps): Ditto.
(wincapc): Ditto.
* pinfo.cc (pinfo::init): Initialize exitcode to unset state rather than
SIGTERM.
(proc_waiter): Detect if exit code is unset and use status from
GetExitCodeProcess.
* sigproc.cc (child_info::sync): Remove exit code detection here since
proc_waiter now (again) detects it.
disk" device or fifo.
(fhandler_base::fchown): Ditto for changing ownership.
* fhandler_disk_file.cc (fhandler_base::fstat_helper): Accommodate device files
on ntfs partitions.
* path.cc (path_conv::check): Use isfs function to figure out if a path exists
on a filesystem to make sure that device files are caught.
(child_info::parent_wr_proc_pipe): Eliminate.
* pinfo.h (_pinfo::alert_parent): Move here from pinfo class.
(_pinfo::dup_proc_pipe): New method.
(_pinfo::sync_proc_pipe): Ditto.
* exceptions.cc (sig_handle_tty_stop): Reflect move of alert_parent.
* init.cc (dll_entry): Exit with status one if main process called ExitProcess.
* pinfo.cc (set_myself): Remove handling of parent_wr_proc_pipe.
(_pinfo::exit): Reflect move of alert_parent. Set procinfo to NULL to flag
that we are exiting normally. Always use exitcode when exiting
(although this could be a little racy).
(pinfo::init): Set default exit to SIGTERM. This will be the exit code
reported if process is terminated.
(_pinfo::dup_proc_pipe): New function.
(pinfo::wait): Duplicate wr_proc_pipe to the right place. Use dup_proc_pipe to
move the pipe to the child.
(_pinfo::sync_proc_pipe): New function.
(_pinfo::alert_parent): Move to _pinfo. Make sure that wr_proc_pipe is ours
before using it.
* sigproc.cc (child_info::child_info): Remove handling of parent_wr_proc_pipe.
* spawn.cc (spawn_guts): Pass our wr_proc_pipe to the child when execing.
Ensure that exit code of cygwin process started from windows is correctly set.
itself here, to avoid a race.
(cygthread::release): Clear more stuff. Add a diagnostic for an internal
error.
* cygthread.h (auto_release): New function.
* pinfo.h (pinfo::remember): Add an argument to denote whether child is
detached.
* fork.cc (fork_parent): Reflect change in arguments to pinfo::remember.
* pinfo.cc (_pinfo::exit): Signal exit more forcibly.
(proc_waiter): Use cygthread::auto_release to signify that cygthread::stub
should release the thread. This should avoid a race.
(pinfo::alert_parent): Don't signify an error when wr_proc_pipe == NULL.
* sigproc.cc (proc_subproc): Add support for PROC_DETACHED_CHILD.
* sigproc.h: Ditto.
* spawn.cc (spawn_guts): Specify whether child is detached or not when calling
pinfo::remember.
MapViewOfFileEx.
* cygthread.cc (cygthread::stub): Previous change to make diagnostic output
more informative was really a bust. Try again. Capture previous name in a new
field in cygthread for diagnostic purposes.
(cygthread::cygthread): Ditto.
(cygthread::release): Add an argument to control whether h should be cleared or
not.
(cygthread::terminate_thread): Use 'inuse' for tests rather than 'h'.
(cygthread): Add some diagnostic fields.
(cygthread::release): Add an argument.
* pinfo.cc (proc_waiter): Accommodate change to cygthread::release.
hProcess handle here since it is used to ensure that a new process isn't
created with the old pid after the old pid exits.
* spawn.cc (spawn_guts): Ditto.
* pinfo.cc (proc_waiter): Don't send any signals if we've execed since this
process doesn't officially exist.
* pinfo.h (pinfo::pid_handle): Eliminate. Just use hProc.
* sigproc.cc (sig_send): Don't send any signals if our sendsig doesn't exist.
That's a sign that we are execing.
(remove_proc): Eliminate pid_handle close.
* pinfo.h (pinfo::wait_thread): New element.
* pinfo.cc (pinfo::wait): Store "handle" to started thread in pinfo.
* sigproc.cc (proc_terminate): Kill any threads waiting for a process pipe.
(proc_subproc): Don't mess with pinfo if it's myself.
* child_info.h (child_info_types): Label enum for _PROC constants.
(child_info::child_info): New constructor.
(child_info::~child_info): New destructor.
(child_info::sync): Declare new function.
(child_info_fork::child_info_fork): New constructor.
(child_info_spawn::child_info_spawn): Remove old constructor.
(child_info_spawn::child_info_spawn): New constructor.
* dcrt0.cc (dll_crt0_0): Use correct sizeof when doing sanity check on passed
in child_info. Signal readiness to parent when not forking (and not spawning).
* fork.cc (sync_with_child): Delete.
(resume_child): Remove extra argument.
(sync_with_parent): Use child_info method to sync with parent.
(fork_child): Don't close fork_info->subproc_ready since that is now handled by
the destructor.
(fork_parent): Remove subproc_ready stuff. Use child_info sync method for
waiting.. Set start time here for child. Rename "forked" to "child".
(fork): Check ch.subproc_ready for validity here.
* pinfo.h (_pinfo::exec_sendsig): Temp storage for exec stub which may be
staying around to handle non-cygwin captive process.
(_pinfo::exec_dwProcessId): Ditto.
(_pinfo::_lock): Renamed from lock.
(_pinfo::lock): New method.
(_pinfo::unlock): Ditto.
(_pinfo::initialize_lock): Ditto.
* pinfo.cc (set_myself): Use initialize_lock method to initialize myself lock.
Set "exec" fields in _pinfo to zero to indicate that we've started
successfully. Set start time here when appropriate.
(_pinfo::commune_send): Use pinfo lock/unlock methods.
(proc_waiter): Remove special case for non-cywin processes. Reinstitute
handling for PID_NOCLDSTOP.
* sigproc.cc (proc_subproc): Set proper EAGAIN errno when process table is
filled.
(sig_send): Use exec_* fields from _pinfo for sending signals if the the _pinfo
sendsig never materializes.
(child_info::child_info): New constructor, renamed from init_child_info.
Zeroes child_info structure and sets appropriate fields in structure based on
chtype.
(child_info::~child_info): New destructor. Closes subproc_ready if it exists.
(child_info_fork::child_info_fork): New constructor.
(child_info_spawn::child_info_spawn): New constructor.
(child_info::ready): New function. Signals parent when child is ready.
(child_info::sync): New function. Wait for child to signal us or process to
die.
(remove_proc): Remove closing of hProcess since this should now be handled
shortly after process creation.
* spawn.cc (spawn_guts): Use child_info_spawn constructor rather than
init_child_info. Save exec_sendsig and exec_dwProcessId in execing _pinfo.
Rely on child_info constructor to properly set parent_wr_proc_pipe in ciresrv.
Revert to previous determination on whether to start a process in suspended
mode. Remove reparenting stuff. Just keep a stub around if starting a
non-cygwin process.
* fork.cc (fork_parent): Set parent_wr_proc.
* pinfo.cc (set_myself): Close child_proc_info->parent_wr_proc if it exists
rather than trying to get value from parent _pinfo.
* pinfo.h (enum parent_aleter): New enum.
(pinfo::alert_parent): Declare as returning a value.
(pinfo::parent_alive): New function.
* pinfo.cc (pinfo::alert_parent): Set wr_proc_pipe to invalid non-NULL value
when parent disappears. Return success of operation.
(proc_waiter): Use __ALERT_* enum for control since these are not really
signals. Implement __ALERT_ALIVE.
* sigproc.cc (my_parent_is_alive): Eliminate.
* sigproc.h (my_parent_is_alive): Ditto for declaration.
(__SIGREPARENT): Eliminate.
Christopher Faylor
Corinna Vinschen