While st_rdev returned by fstat() for /dev/tty should be FH_TTY,
the current cygwin1.dll returns FH_PTYS+minor or FH_CONS+minor.
Similarly, fstat() does not return correct value for /dev/console,
/dev/conout, /dev/conin or /dev/ptmx.
This patch fixes the issue by:
1) Introduce dev_referred_via in fhandler_termios.
2) Add new argument, which has dev_t value referred by open(),
for constructors of fhandler_pty_slave and fhandler_pty_master to
set the value of dev_referred_via.
3) Set st_rdev using dev_referred_via in fhandler_termios::fstat()
if it is available.
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
As reported in
https://cygwin.com/pipermail/cygwin/2023-June/253888.html,
"Bad address" error occurs when stat() is called after the commit
3721a756b0 ("Cygwin: console: Make the console accessible from
other terminals.").
There are two problems in the current code. One is fhandler_console::
fstat() calls get_ttyp()->getsid(). However, fh_alloc() in dtable.cc
omits to initialize the fhandler_console instance when stat() is
called. Due to this, get_ttyp() returns NULL and access violation
occurs. The other problem is fh_alloc() assigns fhandler_console
even if the CTTY is not a console. So the first problem above occurs
even if the CTTY is a pty.
This patch fixes the issue by:
1) Call set_unit() to initialize _tc if the get_ttyp() returns NULL.
2) Assign fhandler_pty_slave for /dev/tty if CTTY is a pty in fh_alloc().
Fixes: 3721a756b0 ("Cygwin: console: Make the console accessible
from other terminals.").
Fixes: 23771fa1f7 ("dtable.cc (fh_alloc): Make different decisions
when generating fhandler for not-opened devices. Add kludge to deal
with opening /dev/tty.")
Reported-by: Bruce Jerrick <bmj001@gmail.com>
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
In test for AMD/Intel Control flow Enforcement Technology user mode
shadow stack support replace Windows version tests with test of wincap
member addition has_user_shstk with Windows version dependent value
Fixes: 41fdb869f9 ("fhandler/proc.cc(format_proc_cpuinfo): Add Linux 6.3 cpuinfo")
Signed-off-by: Brian Inglis <Brian.Inglis@Shaw.ca>
The commit 9fc746d17d does not fix transferring input at exit
appropriately. If the more than one non-cygwin apps are executed
simultaneously and one of them is terminated, the pty master failed
to send input to the other non-cygwin apps. This patch fixes that.
Fixes: 9fc746d17d ("Cygwin: pty: Fix transferring type-ahead input between input pipes.")
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
After the commit e5fcc5837c, transferring type-ahead input between
the pipe for cygwin app and the pipe for non-cygwin app will not be
done appropriately when the stdin of the non-cygwin app is not pty.
Due to this issue, sometimes the keyboard input might be lost which
should be sent to cygwin app. This patch fixes the issue.
Fixes: e5fcc5837c ("Cygwin: pty: Fix reading CONIN$ when stdin is not a pty.")
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
cpuid 0x00000007:0 ecx:7 shstk Shadow Stack support & Windows [20]20H1/[20]2004+
=> user_shstk User mode program Shadow Stack support
AMD SVM 0x8000000a:0 edx:25 vnmi virtual Non-Maskable Interrrupts
Sync AMD 0x80000008:0 ebx flags across two output locations
Previously, the pty master sends inputs to the pipe for cygwin app
even when pseudo console is activated if stdin is not the pty.
This causes the problem that key input is not sent to non cygwin
app even if the app opens CONIN$. This patch sets switch_to_nat_pipe
to true regardless whether stdin is the pty or not to allow that case.
https://cygwin.com/pipermail/cygwin/2023-April/253424.html
Reported-by: Wladislav Artsimovich <cygwin@frost.kiwi>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Drop usage of newlocale/nl_langinfo_l/freelocale.
Call __set_charset_from_locale instead, and make sure to call it
with modifier, if any, otherwise suffer wrong results.
Fixes: c42b98bdc6 ("Cygwin: introduce /proc/codesets and /proc/locales")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The sr_XY locales are supposed to default to cyrillic, but the code
always attached a @cyrillic, same reason as in the previous commit.
Special case "sr" further to workaround that issue.
Fixes: c42b98bdc6 ("Cygwin: introduce /proc/codesets and /proc/locales")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Due to the way locales are evaluated in Windows, we can't ask for
the script of the "sd-IN" locale, because Windows only knows the
"sd-Deva-IN" locale. So asking for the script of the "sd" locale
returns "Arab;", because "sd" is converted to "sd-Arab-PK".
Special case "sd-IN" to workaround that issue.
Fixes: c42b98bdc6 ("Cygwin: introduce /proc/codesets and /proc/locales")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Useless indirection. Rename _unlink_nt back to unlink_nt
and call the function directly with `sharable' flag as needed.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This patch replaces ctty constants with more descriptive macros
(CTTY_UNINITIALIZED and CTTY_RELEASED) rather than -1 and -2 as
well as checking sign with CTTY_IS_VALID().
Fixes: 3b7df69aaa (Cygwin: ctty: Add comments for the special values: -1 and -2.)
Suggested-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Effectively revert commit 57bac33359. The fact that the
devanagari modifier was called devanagar (missing the trailing 'i')
is a result of `locale -av' shortening the locale name to a maximum
of 15 characters.
D'oh. I guess we need a better way to do this...
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far locale(1) had to have knowledge how to construct, thus
duplicating the effort how Cygwin handles locale strings.
Move locale list and codeset list generation into Cygwin by
providing /proc/codesets and /proc/locales files. /proc/locales
does not list aliases, those are still handled in locale(1).
locale(1) opens the files and ueses that info for printing,
like any other application can do now.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Previously, SNDCTL_DSP_POST and SNDCTL_DSP_SYNC were implemented
wrongly. Due to this issue, module-oss of pulseaudio generates
choppy sound when SNDCTL_DSP_POST is called. This patch fixes that.
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Even with the commit 3a4c740f59, SNDCTL_DSP_GET[IO]SPACE ioctl()
does not return the fragment set by SNDCTL_DSP_SETFRAGMENT if it
is issued before read()/write(). This patch fixes the issue.
Fixes: 3a4c740f59 ("Cygwin: dsp: Implement SNDCTL_DSP_SETFRAGMENT ioctl().")
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Avoid the mistake fixed in the preceeding commit by passing
the mode_t argument by reference. This also affects a couple
other functions calling get_posix_access in turn.
Fixes: bc444e5aa4 ("Reapply POSIX ACL changes.")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
commit bc444e5aa4 introduced a call to get_posix_access()
with a NULL pointer for the mode_t parameter because the value
is not needed later on... entirely ignoring the fact that the
mode_t bits are checked for the object being a directory.
In turn, the get_posix_access() call never checked for default
ACEs and returned only the standard ACEs. Thus, every chmod call
on a directory dropped the default ACEs from its permissions, as
well as the default NULL deny-ACE used to store specific bits.
It got also impossible to set the sgid bit on directories.
Fixes: bc444e5aa4 ("Reapply POSIX ACL changes.")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Previously, SNDCTL_DSP_SETFRAGMENT was just a fake. In this patch,
it has been implemented to allow latency control in some apps.
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
fhandler_dev_dsp (OSS) has a problem that waitforallsent(), which is
called from close(), falls into infinite loop if another thread calls
write() accidentally after close(). This patch fixes the issue.
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
The commit af8a7c13b5 has a problem that fsync returns EINVAL for
block device. This patch treats block devices as a special case.
https://cygwin.com/pipermail/cygwin/2023-January/252916.html
Fixes: af8a7c13b5 ("Cygwin: fsync: Return EINVAL for special files.")
Reported-by: Yano Ray <yanorei@hotmail.co.jp>
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Previously, fhandler_dev_dsp (OSS) has a problem that fcntl() does
not take effect at all. This patch fixes the issue.
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
So far, the addresses printed for the shared regions of a process
were faked. The assumption was that the shared regions are always
in the same place in all processes, so we just printed the addresses
of the current process. This is no safe bet. The only safe bet is
the address of the cygheap. So keep track of the addresses in the
cygheap and read the addresses from the cygheap of the observed
processes. Add output for the shared console.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
For ages, open_shared uses the shared_locations parameter as
output to indicate if the mapping for a shared region has been
created or just opened. Split this into two parameters. Use
the shared_locations parameter as input only, return the creation
state of the mapping in a bool reference parameter.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
vmstat from proc-ps-4.0.x prints "Unable to create system stat structure"
if the /proc/cpuinfo output fails to contain topology info. While
Linux always prints topology info if the kernel has been built with
CONFIG_SMP, Cygwin only prints topology info if the CPU is known to
be multi-core (i. e., the HT feature flag is set).
Fix that by printing topology info all the time, even for single-core
CPUs.
Fixes: e0d48debed ("Fix /proc/cpuinfo topology and cache size info")
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The commit 25c4ad6ea5 did not fix the CTTY behavior enough. For
example, in the following test case, TTY will be associated as
a CTTY on the second open() call even though the TTY is already
CTTY of another session. This patch fixes the issue.
#include <unistd.h>
#include <sys/fcntl.h>
int main()
{
if (fork () == 0) {
char *tty = ttyname(0);
int fd;
setsid();
fd = open(tty, O_RDWR);
close(fd);
fd = open(tty, O_RDWR);
usleep (60000000L);
}
return 0;
}
Fixes: 25c4ad6ea5 ("Cygwin: pinfo: Align CTTY behavior to the
statement of POSIX.")
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Previously, the console device could not be accessed from other terminals.
Due to this limitation, GNU screen and tmux cannot be opened in console.
With this patch, console device can be accessed from other TTYs, such as
other consoles or ptys. Thanks to this patch, screen and tmux get working
in console.
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
POSIX states "A terminal may be the controlling terminal for at most
one session."
https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap11.html
However, in cygwin, multiple sessions could be associated with the
same TTY. This patch aligns CTTY behavior to the statement of POSIX.
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
https://cygwin.com/pipermail/cygwin/2022-December/252737.html
If the less is started from non-cygwin shell and window size is
changed, it will hang-up when quitting. The cause of the proglem is
that less uses longjump() in signal handler. If the signal handler
is called while cygwin is acquiring the mutex, cygwin loses the
chance to release mutex. With this patch, the mutex is released
just before calling kill_pgrp() and re-acquired when kill_pgrp()
returns.
Reported-by: Gregory Mason <grmason@epic.com>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
https://cygwin.com/pipermail/cygwin/2022-December/252628.html
After the commit 9e4d308cd5, the performance of read from non-cygwin
pipe has been degraded. This is because select_sem mechanism does not
work for non-cygwin pipe. This patch fixes the issue.
Fixes: 9e4d308cd5 ("Cygwin: pipe: Adopt FILE_SYNCHRONOUS_IO_NONALERT
flag for read pipe.")
Reported-by: tryandbuy <tryandbuy@proton.me>
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Only required for Windows 7.
This in turn allows to drop the helper_pid and related
methods from fhandler_pty_common.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Only required for Windows 7.
This allows to remove fhandler_pipe::get_query_hdl_per_system(),
too.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In commit 2dab880c96 I did a mistake when
I copied the new fhandler_serial::switch_modem_lines() from my modified
3.3.6 branch to the current master and I left a copy paste error. This
patch fixes that error.
Fixes: 2dab880c96 ("Cygwin: fix TIOCMBIS/TIOCMBIC not working when using usbser.sys")
- Previously, we have two tty.cc, one is winsup/cygwin/tty.cc and
the other is winsup/cygwin/fhandler/tty.cc. This is somewhat
confusing. This patch renames fhandler/tty.cc to fhandler/pty.cc.
- The codes related to pty and console in spawn.cc have been moved
into the new class fhandler_termios::spawn_worker, and make spawn.cc
call them. The functionality has not been changed at all.
In winsup/cygwin/fhandler/serial.cc, the function
fhandler_serial::switch_modem_lines() is called when TIOCMBIS/TIOCMBIC
are used in an ioctl() call.
This function uses EscapeCommFunction() for setting and resetting RTS
and DTR signals of a serial port. Unfortunately, this function does not
work on USB CDC devices.
This is not a true bug of CYGWIN but an issue of the usbser.sys driver,
from Windows 2000 to the latest Windows 11. Both 32bit and 64bit
versions of the operating system are affected. Actually, I tested
EscapeCommFunction() also when using a real UART, based on the
traditional 16550 driver and it works fine. Using thirdy party CDC
drivers, like the one provided by FTDI for their USB bridge chips,
probably also works.
However, it is also possible to drive the RTS/DTR signals by writing
their state with SetCommState(), which proved to be working fine all
types of connection. This is also a better solution for handling these
signals since RTS/DTR can be set at the same time rather than having two
separate calls with a visible delay between them.
Report 0 instead of 268435455 (i.e. 0xFFFFFFF) in the tty field of
/proc/*/stat for processes without a controlling terminal. This is what
the procps utility expects when selecting or excluding such processes.
Now that the cygheap isn't part of the CYgwin DLL anymore, we have a
known memory location which is not known in maps output. Fix that by
checking for cygheap address (same in all processes) and add to output.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
.com is a remnant from the past. There are only five executables
left:
chcp.com
format.com
mode.com
more.com
tree.com
Calling them on the command line already requires to use the
suffix anyway. So drop useless .com test from the execve test
for scripts (they are handled earlier in the same function
as executables) and do not handle them like .exe suffixes in
other functions.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
According to POSIX and the Linux man page, select(2) is supposed to
report read ready if a file is at EOF. In the case of a FIFO, this
means that the pipe is empty and there are no writers. But there
seems to be an undocumented exception, observed on Linux and other
platforms: If no writer has ever been opened, then select(2) does not
report read ready. This can happen if a reader is opened with
O_NONBLOCK before any writers have opened.
This commit makes Cygwin consistent with those other platforms by
introducing a special EOF test, fhandler_fifo::select_hit_eof, which
returns false if there's never been a writer opened.
To implement this we use a new variable '_writer_opened' in the FIFO's
shared memory, which is set to 1 the first time a writer opens. New
methods writer_opened() and set_writer_opened() are used to test and
set this variable.
Addresses: https://cygwin.com/pipermail/cygwin/2022-September/252223.html
Takashi Yano
Brian Inglis
Corinna Vinschen
Carlo Bramini
Andy Koppe
Ken Brown