2004-09-23 Kelley Cook <kcook@gcc.gnu.org>
* config.guess: New upstream version
* compile, depcomp, install-sh, ylwrap: Likewise.
2004-09-19 Roger Sayle <roger@eyesopen.com>
* config/mh-x86omitfp: New host makefile fragment. Add
-fomit-frame-pointer to the default BOOT_CFLAGS.
* configure.in: Use it to speed up bootstrap on some IA-32 hosts.
* configure: Regenerate.
2004-09-15 Andrew Pinski <pinskia@physics.uc.edu>
PR target/11572
* configure.in (*-*-darwin*): Renable libobjc.
* configure: Regenerate.
* Makefile.def (bootstrap stages): Add 'lean' parameter.
* Makefile.tpl (configure-stageN-*, all-stageN-*): Turned into
phony targets; do not generate timestamp files.
(distclean-stageN): Remove references to their timestamp files.
(restageN, touch-stageN): Remove.
(stageN-bubble): Rewritten.
(compare): Support lean bootstraps.
* Makefile.in: Regenerate.
* configure.in: Only warn when bootstrapping but
build != host or build != target. Support lean bootstraps.
* configure: Regenerate.
Sync from gcc:
2004-08-26 Phil Edwards <phil@codesourcery.com>
* configure.in: Give a better error message if GMP/MPFR are missing
and a language needing them has been requested.
* configure: Regenerated.
2004-08-25 Phil Edwards <phil@codesourcery.com>
* configure.in: Print a list of available language front-ends if
a requested one is missing. Tidy stray tab characters.
* configure: Regenerated.
* Makefile.in: Regenerate.
* configure: Regenerate.
* Makefile.def (bootstrap-stage): Rename extra_*_flags to
stage_*_flags.
* Makefile.tpl (configure-[+module+], all-[+module+]): Exit
for bootstrapped modules if toplevel bootstrap is going.
(GCC bootstrap): Generate per-stage targets for all bootstrapped
modules. Adjust for changes in Makefile.def. Enable several
rules even in non-bootstrap mode, just to avoid peppering the
template with unnecessary "@if/@endif gcc-bootstrap" pairs.
(stage-[+prev+]-bubble): Remove.
* Makefile.def (Dependencies): Depend on all-build-bison,
all-build-flex, all-build-byacc, all-build-texinfo, rather
than the host variations.
* Makefile.tpl (BUILD_DIR_PREFIX): Remove. Replace throughout
with BUILD_SUBDIR.
(BISON): Update for recent Bisons.
(YACC): Fix typo.
(cross): Depend on all-build.
(all): Do not depend on all-build.
(prebootstrap): Remove.
(dep-kind): Accept separate prefixes for MODULE and ON variables.
(Prebootstrap dependencies): Add them to the per-stage targets
and to all-prebootstrap.
* configure.in (build_configdirs): Always enable build_tools.
(BUILD_DIR_PREFIX): Remove.
* Makefile.def (gcc): Add target variable.
(gdb, expect, guile, tk, tix): Replace with_x with extra_make_flags.
* Makefile.tpl (Autogenerated `all-*' targets): Invoke $(TARGET-*)
in the recursive `make', instead of hardwiring `all'.
(Autogenerated TARGET-* variables): New.
2004-08-09 Mark Mitchell <mark@codesourcery.com>
* configure.in (arm*-*-eabi*): New target.
* configure: Regenerate.
2004-08-03 Paul Brook <paul@codesourcery.com>
* configure.in: Check for MPFR as well as GMP.
* configure: Regenerate.
2004-08-01 Robert Millan <robertmh@gnu.org>
* configure.in: Turn mt-linux into mt-gnu. Use mt-gnu and enable
libmudflap for all GNU-based systems (with Glibc).
* configure: Regenerate.
config/ChangeLog:
2004-08-01 Robert Millan <robertmh@gnu.org>
* mt-linux: Rename to ...
* mt-gnu: ... this.
* configure.in: Add noconfigdirs for crx-*-*.
* configure: Regenerate.
2004-07-09 Loren J. Rittle <ljrittle@acm.org>
* configure.in: Build libmudflap by default on FreeBSD.
* configure: Regenerated.
2004-07-09 Mark Mitchell <mark@codesourcery.com>
* configure.in: Do not build libmudflap by default on non-GNU/Linux
systems.
* configure: Regenerated.
2004-07-08 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
PR target/16344
* Makefile.tpl (profiledbootstrap): Build runtime libraries with
feedback based compiler.
* Makefile.in: Rebuilt.
2004-07-05 Phil Edwards <phil@codesourcery.com>
* configure.in: Do not prepend $srcdir to /dev/null in
makefile fragments.
* configure: Regenerate.
* Makefile.def (build_modules): Add bison, byacc, flex,
m4, texinfo.
(flags_to_pass): Add FLEX.
* Makefile.tpl (BUILD_DIR_PREFIX, BASE_EXPORTS): New.
(BUILD_EXPORTS, HOST_EXPORTS, BASE_TARGET_EXPORTS): Include it.
(DEFAULT_YACC, USUAL_YACC, DEFAULT_LEX, USUAL_LEX, DEFAULT_M4,
DEFAULT_MAKEINFO): Remove.
(CONFIGURED_YACC, CONFIGURED_FLEX, CONFIGURED_BISON,
CONFIGURED_LEX, CONFIGURED_M4, CONFIGURED_MAKEINFO): Substitute.
(YACC, FLEX, BISON, LEX, M4, MAKEINFO): Define to look into
objdir or else use configured tool.
(all-build): New.
(all): Depend on it.
(Build module dependencies): Add.
* Makefile.in: Regenerate.
* configure.in: Better support for multiple build modules,
matching what is done for host/target modules. Do not look
for "plausible" locations of build tools if Canadian cross.
Use autoconf's AC_PROG_CC to find a C compiler. Define
BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
* configure: Regenerate.
* Makefile.tpl (touch-stage[+id+]): New.
(restage[+prev+]): Depend on touch-stage[+id+].
* Makefile.tpl (RECURSE_FLAGS_TO_PASS): New.
Use it throughout.
* Makefile.def: Add profile and feedback bootstrap stages.
Remove next field from bootstrap stages.
* Makefile.tpl (LN, LN_S): Substitute.
(stageN-start, stageN-end): Use double-colon rules, to
provide a hook for additional setup commands.
(distclean-stageN-gcc, restageN): Create dependencies from
[+prev+], not from [+next+].
(stageN-bubble): Add commands for successive stages from
[+prev+], using double-colon rules.
(all-stageN-gcc): Fix typo.
(stagefeedback-start, profiledbootstrap): New.
* Makefile.in: Regenerate.
* configure.in: Call ACX_PROG_LN.
* configure: Regenerate.
config/ChangeLog:
2004-06-09 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_PROG_LN): From gcc, modified to
accept a parameter.
* Makefile.tpl (all.normal): Rename to all.
(all): Replace with a rule to pick the default
target from configure.
(all-gcc, configure-gcc): Use conditionals to
do nothing when toplevel bootstrap is going on.
(GCC directory bootstrap) [gcc-bootstrap]: Disable.
(Toplevel bootstrap) [gcc-no-bootstrap]: Disable.
* configure.in: Support --enable-bootstrap.
* Makefile.def: Remove new- prefix from toplevel
bootstrap targets.
* Makefile.tpl: Likewise.
* Makefile.def: Add bootstrap_stage 4. Add bootstrap2
target.
* Makefile.tpl (Toplevel bootstrap): Pass $(BASE_FLAGS_TO_PASS)
$(RECURSE_FLAGS) to recursive invocation of make.
* Makefile.in: Regenerate.
* configure: Regenerate.
* Makefile.tpl: Whenever a recursive target is defined, wrap
it in a special @if/@endif block, and prepare its maybe
dependency in the @if/@endif block
* configure.in: Instead of writing maybe dependencies, remove
the @if/@endif statements, and remove the @if/@endif blocks
that remain.
* configure: Regenerate.
* Makefile.in: Regenerate.
2004-04-27 Paolo Bonzini <bonzini@gnu.org>
Revert:
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (flags_to_pass): Remove *dir variables that
are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
as well as prefix and exec_prefix.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (host_modules): Mark with the bootstrap
flag packages on which gcc depends.
* Makefile.tpl (all-bootstrap): Use it.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* Makefile.def (flags_to_pass): Remove *dir variables that
are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
as well as prefix and exec_prefix.
* Makefile.in: Regenerate.
2004-04-26 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
* configure: Regenerate.
* config/acx.m4: Mutuate ACX_PROG_CMP_IGNORE_INITIAL from gcc.
* gcc/Makefile.tpl (compare): Use the result of the test.
* gcc/Makefile.in: Regenerate.
2004-04-23 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (all-stage1-gcc, all-stage2-gcc, all-stage3-gcc):
Always relocate gcc and prev-gcc to the original names, even
if the build fails.
(new-cleanstrap, new-restage1, new-restage2, new-restage3):
New targets.
PR bootstrap/14871
* Makefile.tpl: If we don't have built-in-tree target tools,
use the ones found by configure rather than hacking around with
program_transform_name.
* configure.in: Give Makefile.tpl the information necessary
to do that.
* Makefile.in: Regenerate.
* configure: Regenerate.
2004-04-06 Nathanael Nerode <neroden@gcc.gnu.org>
PR bootstrap/14760
* configure.in: When computing baseargs, strip *all* copies of
offending options. Also, don't match/substitute the trailing space,
so that this actually works when two similar options are separated by
only one space.
* configure: Regenerate.
2004-04-06 David Edelsohn <edelsohn@gnu.org>
* configure.in (powerpc-*-aix*): Remove target-libada from noconfigdirs.
(rs6000-*-aix*): Same.
* configure: Regenerate.
to set @stage2_werror_flag@.
* configure: Regenerate.
* Makefile.tpl (top level bootstrap support): Pass
@stage2_werror_flag@ down to configure in stages 2 and 3.
* Makefile.in: Regenerate.
into their proper sections.
* Makefile.tpl (top level bootstrap support): Move disabling
of coverage flags from 'make' to 'configure'; improve comments.
* Makefile.in: Regenerate.
* Makefile.tpl (experimental top level bootstrap) Move stage1
language setting from all- target to configure- target; disable
intermodule optimization in stage 1; prevent gratuitous rebuilds
of stage 1.
* Makefile.in: Regenerate.
* configure.in: Comma-separate stage 1 language list for top
level bootstrap.
* configure: Regenerate.
* Makefile.tpl: Clean up experimental top level bootstrap support:
note known problems; set CONFIG_SHELL; don't set BUILD_CC; relocate
prev-gcc in configure- targets as well as all- targets.
* Makefile.in: Regenerate.
Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/14522
* configure.in: Cope with shell that do not support nesting
quotes inside quoted backquote substitutions.
* configure: Regenerate.
2004-03-10 Andrew Pinski <pinskia@physics.uc.edu>
PR bootstrap/14522
* configure.in: Fix escaping of $.
* configure: Regenerate.
2004-03-11 Nathanael Nerode <neroden@gcc.gnu.org>
* configure: Regenerate.
2004-03-08 Paolo Bonzini <bonzini@gnu.org>
PR ada/14131
Move language detection to the top level.
* configure.in: Find default values for the tools as
soon as possible. Disable ada if GNAT is not found.
Emit error message about missing languages. Expand
--enable-languages=all for the gcc subdirectory.
(config)
2004-03-08 Paolo Bonzini <bonzini@gnu.org>
PR ada/14131
Move language detection to the top level.
* acx.m4 (ACX_PROG_GNAT): New macro, moved here
from the gcc subdirectory.
2004-03-09 Hans-Peter Nilsson <hp@axis.com>
* accross.m4 (AC_C_BIGENDIAN_CROSS): Compile endian probe with
"-c". Properly quote parameter for AC_MSG_ERROR.
(I don't know if it will fix either of them, but it relates
to them.)
* configure.in: Don't use shared config.cache for target
directories.
* configure: Regenerate.
2003-08-23 Phil Edwards <pme@gcc.gnu.org>
* configure.in: Use newline instead of semicolon when assuming
shell arguments in a for loop.
* configure: Regenerated.
2003-08-20 Geoffrey Keating <geoffk@apple.com>
PR 8180
* configure.in: When testing with_libs and with_headers, treat
'no' as unset. Based on a patch by Dan Kegel <dank@kegel.com>.
* configure: Regenerate.
Index: gcc/ChangeLog
2003-08-20 Geoffrey Keating <geoffk@apple.com>
PR 8180
* configure.in: When testing with_libs and with_headers, treat
'no' as unset. Based on a patch by Dan Kegel <dank@kegel.com>.
* configure: Regenerate.
* configure.in: Switch more things to use maybe dependencies.
* Makefile.tpl: Switch more things to use maybe dependencies.
Factor out common code from autogen IF statements.
* configure: Regenerate.
* Makefile.in: Regenerate.
* configure.in: Switch more things to use maybe dependencies.
Rearrange a little. Use GCC_TOPLEV_SUBDIRS.
* configure: Regenerate.
* Makefile.tpl: Switch more things to use maybe dependencies.
* Makefile.in: Regenerate.
<config>
* config/acx.m4: Introduce _GCC_TOPLEV_NONCANONICAL_BUILD,
_GCC_TOPLEV_NONCANOICAL_HOST, _GCC_TOPLEV_NONCANONICAL_TARGET,
GCC_TOPLEV_SUBDIRS.
(multilib.ts): ... this. Moved into...
(multilib.out): ... this. Don't use sub-make.
($(BUILD_SUBDIR)/[+module+]/Makefile, [+module+]/Makefile,
$(TARGET_SUBDIR)/[+module+]/Makefile, gcc/Makefile): Moved into...
(configure-build-[+module+], configure-[+module+],
configure-target-[+module+], configure-gcc): ... these. Test
for Makefile existence. Drop config.status from dependencies.
* Makefile.in: Rebuilt.
* configure.in: Move gcc-version-trigger to the end of
ac_configure_args. Add comments to maybedep.tmp and
serdep.tmp. Introduce --disable-serial-configure. Remove
nonopt from baseargs, matching and removing corresponding
whitespace while at it.
* configure: Rebuilt.
* Makefile.tpl: Change dependency for */multilib.out so that
it works when gcc isn't in the tree.
* configure.in: Substitute more.
* configure: Run subconfigures from the Makefile.
* Makefile.tpl: Run subconfigures from the Makefile; add a few
convenience targets. Make sure gcc isn't rebuilt after bootstrap.
* configure.in: ...to here.
* configure.in: Separate subconfigure options added by this file from
options given by the user. Add machinery to put args for host
subconfigures into the Makefile.
* Makefile.tpl: Remove 'vault' targets.
* Makefile.tpl: Reorder and comment dependencies.
* Makefile.in: Regenerate.
(Continuing slow-motion replay)
* configure: More autoconf-style substitutions.
* Makefile.tpl: More autoconf-style substitutions.
* Makefile.in: Regenerate.
2002-11-30 Nathanael Nerode <neroden@gcc.gnu.org>
(Continuing slow-motion replay)
* configure: Substitute more variables in a more autoconf-friendly
way. Simplify slightly.
* Makefile.tpl: Make more variables substitutable in an
autoconf-friendly way.
* Makefile.in: Regenerate.
(Continuing slow-motion replay)
* configure.in (v810*): Remove special setting of tools.
* configure: Add support for extra required flags for ar or nm.
* configure.in (aix4.3+): Use above support for target-specific
issues, rather than using config/mt-aix43.
(Starting slow-motion replay merge from gcc 3.4 b-i-b branch)
* configure: Remove 'removing', which doesn't work. Replace $subdir
with . everywhere. Replace $subdirs with ''. Replace $makesrcdir
with $srcdir. Reformat indentation. Substitute some variables
formerly hard-coded in the Makefile for build=host.
* Makefile.tpl: Autogenerate more; make more autoconf-friendly.
* Makefile.def: Autogenerate more.
* Makefile.in: Regenerate.
* Makefile.tpl: Make more autoconf-friendly.
* Makefile.in: Regenerate.
* configure: Make substitution more autoconf-like.
2002-09-28 Richard Earnshaw <rearnsha@arm.com>
* configure.in (arm-*-coff, strongarm-*-coff, xscale-*-coff): Use a
single entry to handle all these.
(arm-*-elf, strongarm-*-elf, xscale-*-elf): Likewise. Also enable
libjava on arm-*-elf.
* Makefile.in (TARGET_CONFIGARGS, BUILD_CONFIGARGS): Replace
CONFIG_ARGUMENTS.
(ALL_BUILD_MODULES_LIST, BUILD_CONFIGDIRS, BUILD_SUBDIR):
New variables.
(ALL_BUILD_MODULES, CONFIGURE_BUILD_MODULES): New variables
and rules.
(all.normal): Depend on ALL_BUILD_MODULES.
(CONFIGURE_TARGET_MODULES rule): Use TARGET_CONFIGARGS.
(all-build-libiberty): Depend on configure-build-libiberty.
* configure: Calculate and substitute proper value for
ALL_BUILD_MODULES.
* configure.in: Create the build subdirectory.
Calculate and substitute TARGET_CONFIGARGS (formerly
CONFIG_ARGUMENTS); also BUILD_SUBDIR and BUILD_CONFIGARGS (new).
* configure: Revert changes made on May 18 and May 19.
* Makefile.in (CC_FOR_TARGET): Make sure as/ld in the gcc
directory are used if they exist. Make sure
$(build_tooldir)/include is searched for header files,
$(build_tooldir)/lib/ for library files.
(GCC_FOR_TARGET): Likewise.
(CXX_FOR_TARGET): Likewise.
Add ``-W -Wall'' to sub-directories bfd, binutils, gas gprof, ld and
opcodes by the addition of WARN_CFLAGS to Makefile.am and configury to
set it. Add configure option --enable-build-warnings.
Re-generate all and sundry using auto*-000227.
Geoffrey Keating
DJ Delorie
H.J. Lu
Daniel Jacobowitz
Aaron W. LaFramboise
Nick Clifton
Richard Sandiford
Daniel Berlin
Richard Henderson
Paolo Bonzini
Jim Wilson
Nathanael Nerode
Mark Mitchell
Christopher Faylor
Corinna Vinschen
Zack Weinberg
Rainer Orth
Thomas Fitzsimmons
Andrew Cagney
Alexandre Oliva
Bob Wilson
Hans-Peter Nilsson
Andreas Jaeger
Keith Seitz
Jakub Jelinek
John David Anglin
Andreas Schwab
Alan Modra
Jeff Law
Jason Merrill
Jason Molenda
Ian Lance Taylor