`both*'. New configure option --{en,dis}able-ld.
ld, gold/
* configure.ac: For --enable-gold, handle value `default' instead of
`both*'. Always install ld as ld.gold, install as ld if gold is
the default.
/:
PR other/46202
* configure.ac: Fix just-built in-tree STRIP name to be
binutils/strip-new.
* configure: Regenerate.
* Makefile.def (install-strip-gcc, install-strip-binutils)
(install-strip-opcodes, install-strip-ld, install-strip-itcl)
(install-strip-sid): Mirror dependencies on non-strip variants
of these targets on the respective -strip prerequisites.
* Makefile.tpl (install-strip, install-strip-host)
(install-strip-target): New targets.
(install-strip-[+module+], install-strip-target-[+module+]):
New targets.
* Makefile.in: Regenerate.
etc/:
* Makefile.in (install-strip): New target.
libiberty/:
PR other/46202
* Makefile.in (install-strip): New phony target.
(install): Also mark as phony.
PR lto/46273
* configure.ac: Remove libelf tests. Build lto-plugin on ELF always
and on other supported platforms whenever LTO is enabled.
* configure: Rebuild.
(--enable-lto): Turn on by default for all non-ELF platforms that
have had LTO support added so far. Set build_lto_plugin appropriately
for both ELF and non-ELF.
(configdirs): Add lto-plugin or not based on build_lto_plugin.
* configure: Regenerate.
/:
PR bootstrap/45326
PR bootstrap/45174
* configure.ac: Honor initial values of $build_configargs,
$host_configargs, $target_configargs. Mark the precious, so
environment settings get recorded.
* configure: Regenerate.
/:
Sync from GCC:
2010-09-30 Michael Eager <eager@eagercon.com>
* configure.ac (microblaze): Add target-libssp to noconfigdirs.
* configure: Regenerate.
2010-09-21 Iain Sandoe <iains@gcc.gnu.org>
* configure.ac (enable-lto): Add Darwin to the list of supported lto
targets and amend comment.
* configure: Regenerate.
2010-09-03 Jack Howarth <howarth@bromo.med.uc.edu>
* configure.ac: Enable LTO by default on Darwin.
* configure: Regenerate.
2010-07-23 Marc Glisse <marc.glisse@normalesup.org>
PR bootstrap/44455
* configure.ac (extra_mpfr_configure_flags): Copy from
extra_mpc_gmp_configure_flags.
* configure: Re-generated.
config/:
Sync from GCC:
2010-09-10 Jonathan Yong <jon_y@users.sourceforge.net>
* dfp.m4: Enable decimal float for i?86 cygwin
and mingw, and for x86_64 mingw.
/:
Sync from GCC:
2010-05-05 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Allow all the versions greater than 0.10 of PPL.
* configure: Regenerated.
2010-04-20 Eric Botcazou <ebotcazou@adacore.com>
* configure.ac (BUILD_CONFIG): Redirect output to /dev/null.
* configure: Regenerate.
2010-04-17 Ralf Corsépius <ralf.corsepius@rtems.org>
* configure.ac (*-*-rtems*): Add target-libiberty to $skipdirs.
* configure: Regenerate.
2010-04-16 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* configure.ac: Check for elf_getshdrstrndx or elf_getshstrndx
separately.
* configure: Regenerate.
2010-04-13 Steve Ellcey <sje@cup.hp.com>
* configure: Regenerate after change to elf.m4.
2010-04-02 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Add brackets around AC_TRY_COMPILE alternative.
* configure: Regenerated.
2010-04-02 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Print "buggy but acceptable" when CLooG
revision is less than 9.
* configure: Regenerated.
config/:
Sync from GCC:
2010-04-13 Steve Ellcey <sje@cup.hp.com>
* elf.m4: Add hppa[12]*-*-hpux* to list of non-elf platforms.
2010-01-05 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* stdint.m4 (GCC_HEADER_STDINT): Don't typedef uint8_t etc. if
corresponding macros already exist.
bfd/:
* configure: Regenerate.
2010-05-18 Steven Bosscher <steven AT gcc.gnu.org>
* configure.ac (--enable-lto): All *-apple-darwin* now support LTO.
* configure: Regenerate.
2010-05-07 Steven Bosscher <steven AT gcc.gnu.org>
* configure.ac (--enable-lto): Add x86_64-apple-darwin* as
a platform that supports LTO.
* configure: Regenerate.
2010-04-27 Dave Korn <dave.korn.cygwin AT gmail.com>
PR lto/42776
* configure.ac (--enable-lto): Refactor handling so libelf tests
are only performed inside then-clause of ACX_ELF_TARGET_IFELSE,
and allow LTO to be explicitly enabled on non-ELF platforms that
are known to support it inside else-clause.
* configure: Regenerate.
/:
PR bootstrap/43328
* configure.ac: Do not pass --enable-multilib nor
--disable-multilib in baseargs. Accept explicitly passed
--enable_multilib.
* configure: Regenerate.
2010-03-19 Jack Howarth <howarth@bromo.med.uc.edu>
PR ada/42554
* configure.ac: Only pass -c to ranlib for darwin9 and earlier.
* configure: Regenerate.
* Makefile.tpl (local-distclean): Also remove config.cache files in
sub-directories as there may not be Makefiles present in the
sub-directories.
* Makefile.in: Regenerate.
* configure.ac: Revert previous delta.
* configure: Regenerate.
of ppl and cloog. Fix in-tree configury of libelf, skip tests.
Fix portability of test of C++ as bootstrap language. Add
ppl/src/ppl-config.o to the bootstrap compare exclusion list.
* configure: Rebuild.
* Makefile.def: Drop host and target settings from gmp, mpfr, ppl,
and cloog. Fix in-tree ppl configuration. Introduce libelf
in-tree building.
* Makefile.tpl (POSTSTAGE1_CXX_EXPORT): New.
(POSTSTAGE1_HOST_EXPORTS): Use it.
(STAGE[+id+]_CXXFLAGS): New.
(BASE_FLAGS_TO_PASS): Pass it down.
(configure-stage[+id+]-[+prefix+][+module+]): Use it. Add
extra_exports.
(all-stage[+id+]-[+prefix+][+module+]): Likewise.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): Add
extra_exports.
* Makefile.in: Rebuild.
* configure.ac (FLAGS_FOR_TARGET): Add -L and -isystem
paths for *-w64-mingw* and x86_64-*mingw*.
* configure: Regenerated.
* configure.ac: Disable target-winsup & co for
x86_64-*-mingw* and *-w64-mingw* targets.
* configure: Regenerated.
* configure.ac (CLooG test): Use = with test.
* configure: Regenerate.
* configure.ac: Do not set LIBS for ppl/cloog checks. Disable
cloog if the ppl version check failed. Move flags saving
before setting in libelf check.
* configure: Regenerate.
* configure.ac: Adjust the ppl and cloog configure to work as
documented. Disable cloog if ppl was disabled. Omit the version
checks if they were disabled.
* configure: Re-generate.
/:
* configure.ac: Do not use $extrasub for replacing @if/@endif
parts in Makefile; instead, use additional arguments to
AC_CONFIG_COMMANDS to do the replacement manually, with several
sed invocations, to avoid HP-UX sed command limits.
* configure: Regenerate.
/:
* configure.ac: Call AC_DISABLE_OPTION_CHECKING.
(baseargs): Add --disable-option-checking.
* configure: Regenerate.
config/:
* override.m4 (AC_DISABLE_OPTION_CHECKING): Define to be
empty if not defined, to avoid error with 2.59.
(_AC_LANG_IO_PROGRAM): When the Autoconf version is exactly
2.64, avoid per-language instances to drop fopen from test
program.
/:
2009-07-31 Christian Bruel <christian.bruel@st.com>
* configure.ac (sh*-*-elf): Don't add target-libgloss to noconfigdirs.
* configure: Regenerate.
2009-07-06 Ian Lance Taylor <iant@google.com>
* configure.ac: Add missing comma in AC_ARG_WITH(boot-libs).
* configure: Rebuild.
2009-06-26 Steve Ellcey <sje@cup.hp.com>
PR bootstrap/40338
* configure.ac (comparestring): Create new variable.
* Makefile.tpl (comparestring): Use to skip some comparisions.
* configure: Regenerate.
* Makefile.in: Regenerate.
2009-06-23 Ian Lance Taylor <iant@google.com>
* configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
2009-06-08 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.ac: Detect MPC in default directory.
* configure: Regenerate.
2009-06-02 Richard Sandiford <r.sandiford@uk.ibm.com>
* configure.ac (powerpc-*-aix*, rs6000-*-aix*): Add target-newlib
to noconfdirs.
* configure: Regenerate.
2009-05-29 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* Makefile.def: Add MPC support and dependencies.
* configure.ac: Likewise. Reorganize GMP/MPFR checks.
* Makefile.in, configure: Regenerate.
2009-05-24 Nicolas Roche <roche@adacore.com>
* Makefile.tpl (compare-target): Skip ./ada/*tools directories.
* Makefile.in: Regenerate.
2009-05-21 Dave Korn <dave.korn.cygwin@gmail.com>
* configure.ac (cygwin noconfigdirs): Remove libgcj.
* configure: Regenerate.
2009-05-07 Dave Korn <dave.korn.cygwin@gmail.com>
* configure.ac ($with_ppl): Default to no if not supplied.
($with_cloog): Likewise.
configure: Regenerate.
2009-04-24 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
PR bootstrap/39739
* configure.ac (extra_mpfr_configure_flags): Set and AC_SUBST.
* Makefile.def (module=mpfr): Use extra_mpfr_configure_flags.
* configure, Makefile.in: Regenerate.
2009-04-14 Jakub Jelinek <jakub@redhat.com>
* configure.ac: Change copyright header to refer to version
3 of the GNU General Public License and to point readers at the
COPYING3 file and the FSF's license web page.
* Makefile.def: Likewise.
* Makefile.tpl: Likewise.
* Makefile.in: Regenerate.
2009-04-09 Jack Howarth <howarth@bromo.med.uc.edu>
* configure.ac: Restore match for darwin9 or later. Use double
brackets since regeneration eats one pair.
* configure: Regenerate.
Hans-Peter Nilsson
Alexandre Oliva
H.J. Lu
Nick Clifton
Ian Lance Taylor
Paolo Bonzini
Ralf Wildenhues
Dave Korn
Alan Modra
Tristan Gingold
Joseph Myers
Rainer Orth
Kaveh Ghazi
Joern Rennecke
Jie Zhang