event.
(_cygtls::handle_SIGCONT): Declare ew function.
* cygwait.cc (is_cw_sig_handle): Delete.
(is_cw_sig_cont): New convenience define.
(cygwait): Clear signal if is_cw_sig_cont and we got a SIGCONT.
* cygwait.h (cw_wait_mask): Add cw_sig_cont.
* exceptions.cc (sig_handle_tty_stop): Tighten "incyg" region. Use cw_sig_cont
param for cygwait. Don't zero signal here outside of lock.
(sigpacket::setup_handler): Don't check for in_forkee since we will now never
get here in that state.
(_cygtls::handle_SIGCONT): Define new function.
(sigpacket::process): Call handle_SIGCONT early to deal with SIGCONT. Nuke
continue_now handling. Allow SIGKILL to kill a suspended process. Delete a
couple of now-unneeded labels.
(_cygtls::call_signal_handler): Reorganize setting of incyg within lock.
* sigproc.cc (pending_signals): Simplify.
(pending_signals::clear): New method.
(_cygtls::remove_wq): Reorganize to always close wq.thread_ev if it exists to
avoid handle leaks.
(sig_clear): Simplify by just calling sigq.clear().
(sig_dispatch_pending): Always call sigq.pending even in signal thread to force
another loop in wait_sig.
(sig_send): Remove a "goto out" just before out: label.
(pending_signals::add): Simplify.
(pending_signals::del): Delete.
(pending_signals::next): Delete.
(wait_sig): Define variable q to be the start of the signal queue. Just
iterate through sigq queue, deleting processed or zeroed signals. Only set
clearwait when the current signal is SIGCHLD.
* sigproc.h: Add a comment about an unused enum.
* dcrt0.cc (parent_sigmask): Delete.
(dll_crt0_1): Use spawn_info->moreinfo->sigmask rather than saved parent signal
mask.
* thread.cc (pthread::thread_init_wrapper): Add comment stressing the
importance of maintaining ordering of statements.
Make current with UA2011 specification.
Add an F_PREFERRED opcode flag that indicates a preferred alias
when multiple aliases for the same opcode exists.
For 'lzd':
Add 'lzcnt' as primary instruction, and make 'lzd' an alias.
Add 'ldtw', 'ldtwa', 'sttw', 'sttwa':
The modern opcode for for 'ldd', 'ldda', 'std', and 'stda' on
integer registers. Mark the latter now as aliases.
For 'flush':
Support "[address]" syntax as well as plain "address".
Rework 'mov' aliases for 'wr':
Eliminate bogus three operand moves, and encode the
instructions properly for the "mov REG, %ASR" cases,
specifically we should encode the register in rs2 not rs1 as
per The SPARC V8 Architecture Manual.
Add missing cbcond aliases:
c{w,x}bz, c{w,x}blu, c{w,x}bnz, c{w,x}bgeu
Add 'd' suffix VIS logical ops:
The primary opcode for 'fzero' is now 'fzerod' (compare with
'fzeros'), for example. And thus 'fzero' is now an alias.
Add modern opcodes for condition code setting edge instructions:
They are now edgeN{,l}cc instead of plain edgeN{,l}.
Add modern opcodes for VIS comparisons:
All VIS comparisons now start with prefix "fp", retain the
older variants as aliases.
The signed variants for equal and not-equal have "u" aliases
to show that these comparisons are equally suited for unsigned
compares.
Update existing test cases as needed, and add several new ones.
include/opcode/
* sparc.h (F_PREFERRED): Define.
(F_PREF_ALIAS): Define.
opcodes/
* sparc-dis.c (compare_opcodes): When encountering multiple aliases
of an opcode, prefer the one with F_PREFERRED set.
* sparc-opc.c (sparc_opcodes): Add ldtw, ldtwa, sttw, sttwa,
lzcnt, flush with '[address]' syntax, and missing cbcond pseudo
ops. Make 64-bit VIS logical ops have "d" suffix in their names,
mark existing mnenomics as aliases. Add "cc" suffix to edge
instructions generating condition codes, mark existing mnenomics
as aliases. Add "fp" prefix to VIS compare instructions, mark
existing mnenomics as aliases.
gas/testsuite/
* gas/sparc/cbcond.s: Add tests for new opcode aliases.
* gas/sparc/cbcond.d: Updated.
* gas/sparc/hpcvis3.s: Add tests for new opcode aliases.
* gas/sparc/hpcvis3.d: Updated.
* gas/sparc/v8-movwr-imm.d: Fix expected disassembly.
* gas/sparc/edge.s: New test.
* gas/sparc/edge.d: Expected disassembly.
* gas/sparc/flush.s: New test.
* gas/sparc/flush.d: Expected disassembly.
* gas/sparc/ldd_std.s: New test.
* gas/sparc/ldd_std.d: Expected disassembly.
* gas/sparc/ldtw_sttw.s: New test.
* gas/sparc/ldtw_sttw.d: Expected disassembly.
* gas/sparc/sparc.exp: Run new tests.
(bfd_elf32_bfd_is_target_special_symbol): Define.
* v850.h (V850_INVERSE_PCREL): Define.
* v850-dis.c (print_value): With V850_INVERSE_PCREL compute the
destination address by subtracting the operand from the current
address.
* v850-opc.c (insert_u16_loop): Disallow negative offsets. Store
a positive value in the insn.
(extract_u16_loop): Do not negate the returned value.
(D16_LOOP): Add V850_INVERSE_PCREL flag.
(ceilf.sw): Remove duplicate entry.
(cvtf.hs): New entry.
(cvtf.sh): Likewise.
(fmaf.s): Likewise.
(fmsf.s): Likewise.
(fnmaf.s): Likewise.
(fnmsf.s): Likewise.
(maddf.s): Restrict to E3V5 architectures.
(msubf.s): Likewise.
(nmaddf.s): Likewise.
(nmsubf.s): Likewise.
(suffix_scan::name_len): New method.
(suffix_scan::has): Store namelen since we have it already anyway.
Add a bit of explanation and a FIXME to comment.
(suffix_scan::next): Never attach extra .lnk suffix if resulting
filename length exceeds NAME_LEN.
(symlink_info::check): Bail out immediately with ENAMETOOLONG if
filename length exceeds NAME_LEN.
* cygheap.cc (init_cygheap::find_tls): Rename threadlist_ix -> ix. Only take
one pass through thread list, looking for eligible threads to signal. Set a
new param indicating that function has found a sigwait* mask.
* cygheap.h (init_cygheap::find_tls): Reflect new parameter.
* dcrt0.cc (parent_sigmask): New variable.
(child_info_spawn::handle_spawn): Save parent's signal mask here.
(dll_crt0_1): Restore parent's signal mask to tls sigmask as appropriate. Call
sig_dispatch_pending to flush signal queue when we can finally do something
with signals.
* exceptions.cc (sigpacket::process): Avoid attempting to handle signals if we
haven't finished initializing. Rely on the fact that find_tls will do mask
checking and don't do it again. Delete ill-named 'dummy' variable.
* sigproc.cc (cygheap_exec_info::alloc): Save calling thread's signal mask in
new sigmask field.
(wait_sig): Try to debug when WFSO fails and DEBUGGING is defined.
* thread.cc (pthread::set_tls_self_pointer): Make this a true automatic method
rather than inexplicably relying on a thread parameter.
(pthread::thread_init_wrapper): Accommodate set_tls_self_pointer change to
non-static. Initialize sigmask before setting tid or suffer signal races.
* ehread.h (pthread::set_tls_self_pointer): Make non-static, delete parameter.
thread stack on systems not freeing it by themselves.
* wincap.h (wincaps::terminate_thread_frees_stack): New element.
* wincap.cc: Implement above element throughout.
(pinfo::operator == (char *)): Remove unused operator.
* pinfo.cc (pinfo::status_exit): Move this function info pinfo class. Use
progname from the pinfo rather than myself. Be defensive when inspecting
procinfo.
(pending_signals::pending): Force an additional loop through wait_sig by
setting retry whenever this function is called.
(sig_send): Reorganize to wait for SIGHOLD at bottom. Always add signal to
pending queue and work on whole queue rather than just the one signal. Loop
when sigq.retry is set. Fix long-broken check for SIGCHLD after queued
signals.
* tic6x-opcode-table.h: Fix patterns for add, ldnw and xor.
* gas/tic6x/insns16-lsd-unit.s: Correct bit patterns for mvk, add
and xor.
* gas/tic6x/insns16-lsd-unit.d: Update expected output.
* newlib.hin (_FVWRITE_IN_STREAMIO): Undefine.
* configure.in (--disable-newlib-fvwrite-in-streamio): New option.
* configure: Regenerated.
* libc/stdio/fputs.c (_fputs_r): Use _FVWRITE_IN_STREAMIO to
control __sfvwrite_r. Add alternative implementation.
* libc/stdio/fputws.c (_fputws_r): Ditto.
* libc/stdio/fwrite.c (_fwrite_r): Ditto.
* libc/stdio/puts.c (_puts_r): Ditto.
* libc/stdio/vfprintf.c (__ssputs_r, __sfputs_r): New function.
(_VFPRINTF_R): Use _FVWRITE_IN_STREAMIO to control vector buffer.
(__SPRINT): Use _FVWRITE_IN_STREAMIO to control macro definition.
* libc/stdio/vfwprintf.c (_VFWPRINTF_R): Use _FVWRITE_IN_STREAMIO
to control vector buffer.
* tic6x-opcode-table.h: Rename mpydp's specific operand type macro
from ORREGD1324 to ORXREGD1324 and make it cross-path-able through
tic6x_operand_xregpair operand coding type.
Make mpydp instruction cross-path-able, ie: remove the FIXed 'x'
opcode field, usu ORXREGD1324 for the src2 operand and remove the
TIC6X_FLAG_NO_CROSS.
* gas/tic6x/insns-bad-1.s: Remove test-case for mpydp with
cross-path.
* gas/tic6x/insns-bad-1.l: Update expected output.
* gas/tic6x/insns-c674x.s: Add a test-case for mpydp with
cross-path.
* gas/tic6x/insns-c674x.d: Update expected output.
order to encode separately the msb and lsb of a register pair ; this will be
needed to encode the opcodes the same
way as Ti assembler does.
* gas/config/tc-tic6x.c: handle tic6x_coding_dreg_(msb|lsb) field coding types
and use it to encode register pair numbers when required.
* opcodes/tic6x-dis.c: decodes opcodes that have individual msb and lsb halves
in src1 & src2 fields ; discard the src1 (lsb) value and only use src2 (msb),
discarding bit 0, to follow what Ti SDK does in that case as any value in the
src1 field yields the same output with SDK disassembler.
* include/opcode/tic6x-opcode-table.h: modify absdp, dpint, dpsp, dptrunc,
rcpdp and rsqrdp opcodes to use the new field coding types.
* gas/testsuite/gas/tic6x/insns-c674x.d, gas/testsuite/gas/tic6x/insns-c674x.s
: add test case for the newly generated opcode but keep the old ones as they
seem legit as per Ti disassembler output.
* elf.c (elfcore_write_s390_tdb): New function.
(elfcore_write_register_note): Call it.
(elfcore_grok_s390_tdb): New function.
(elfcore_grok_note): Call it.
* readelf.c (get_note_type): Add NT_S390_TDB.
follow Linux.
* fhandler_socket.cc: Change UNIX_PATH_LEN to UNIX_PATH_MAX throughout.
(fhandler_socket::recv_internal): Don't return prematurely in case of
successful return. For AF_LOCAL sockets, overwrite returned AF_INET
name with AF_LOCAL name.
filename length to allow non-NUL terminated strings within namelen
bytes. Copy over sun_path to local array sun_path to have a
NUL-terminated string for subsequent function calls. Move path_conv
check before OS bind call to not bind the socket before being sure
the file doesn't exist. Add and fix comments.
Corinna Vinschen
Jeff Johnston
Christopher Faylor
Matthew Gretton-Dann
David S. Miller
DJ Delorie
Nick Clifton
Joel Sherrill
Michael Frysinger
Steve Ellcey
Sandra Loosemore
Kyrylo Tkachov