b5c0f49c13
2013-07-10 Jack Howarth <howarth@bromo.med.uc.edu>
...
PR target/57792
* configure.ac: Use --with-sysroot=\"`xcrun --show-sdk-path`\" on darwin13 and later.
* configure: Regenerated.
2013-07-10 20:55:59 +00:00
b5627d2ebc
* configure.ac (mips*-*-bsd*, mips*-*-ultrix*, mips*-*-osf*)
...
(mips*-*-ecoff*, mips*-*-pe*, mips*-*-irix* [v4 and earlier])
(mips*-*-lnews*, mips*-*-riscos*): Add gas and ld to noconfigdirs.
* configure: Regenerate.
gas/
* NEWS: Note removal of ECOFF support.
* doc/as.texinfo (--emulation): Update for the removal of MIPS ECOFF.
* Makefile.am (TARG_ENV_HFILES): Remove config/te-lnews.h.
(MULTI_CFILES): Remove config/e-mipsecoff.c.
* Makefile.in: Regenerate.
* configure.in: Remove MIPS ECOFF references.
(mips-sony-bsd*, mips-*-bsd*, mips-*-lnews*-ecoff, mips-*-*-ecoff):
Delete cases.
(mips-*-irix5*-*, mips*-*-linux*-*, mips*-*-freebsd*)
(mips*-*-kfreebsd*-gnu, mips-*-*-elf): Fold into...
(mips-*-*): ...this single case.
(mipsbecoff, mipslecoff, mipsecoff): Remove emulations. Expect
MIPS emulations to be e-mipself*.
* configure: Regenerate.
* configure.tgt (mips-sony-bsd*, mips-*-ultrix*, mips-*-osf*)
(mips-*-ecoff*, mips-*-pe*, mips-*-irix*, ips-*-lnews*, mips-*-riscos*)
(mips-*-sysv*): Remove coff and ecoff cases.
* as.c (mipsbecoff, mipslecoff, mipsecoff): Remove.
* ecoff.c: Remove reference to MIPS ECOFF.
* config/e-mipsecoff.c, config/te-lnews.h: Delete files.
* config/tc-mips.c (ECOFF_LITTLE_FORMAT): Delete.
(RDATA_SECTION_NAME, mips_target_form): Remove COFF and ECOFF cases.
(mips_hi_fixup): Tweak comment.
(append_insn): Require a howto.
(mips_after_parse_args): Remove OBJ_MAYBE_ECOFF code.
gas/testsuite/
* gas/all/gas.exp: Remove reference to mips-ecoff.
* gas/mips/branch-misc-1.d, gas/mips/branch-misc-2.d,
gas/mips/branch-misc-2-64.d, gas/mips/branch-misc-2pic.d,
gas/mips/branch-misc-2pic-64.d, gas/mips/branch-swap.d: Remove
skips for mips-*-ecoff.
ld/
* NEWS: Document the removal of MIPS ECOFF targets.
* ld.texinfo (--gpsize=@var{value}): Use MIPS ELF rather than
MIPS ECOFF as an example of a target that supports small data.
* ldmain.c (g_switch_value): Likewise.
* configure.tgt (mips*-*-pe, mips*-dec-ultrix*, mips*-dec-osf*)
(mips*-sgi-irix* [v4 and earlier], mips*el-*-ecoff*, mips*-*-ecoff*)
(mips*-*-bsd*, mips*-*-lnews*): Remove cases.
* Makefile.am (ALL_EMULATION_SOURCES): Remove emipsbig.c, emipsbsd.c,
emipsidt.c, emipsidtl.c, emipslit.c, emipslnews.c and emipspe.c.
(emipsbig.c, emipsbsd.c, emipsidt.c, emipsidtl.c, emipslit.c)
(emipslnews.c, emipspe.c): Delete rules.
* Makefile.in: Regenerate.
* emulparams/mipsbig.sh, emulparams/mipsbsd.sh, emulparams/mipsidt.sh,
emulparams/mipsidtl.sh, emulparams/mipslit.sh, emulparams/mipslnews.sh,
emulparams/mipspe.sh, emultempl/mipsecoff.em: Delete.
* emultempl/m68kcoff.em: Update comment to say that MIPS ECOFF support
has now been removed.
* emultempl/pe.em: Remove TARGET_IS_mipspe checks.
2013-06-22 16:44:14 +00:00
01ab5147dd
* gas/config/tc-avr.c: Change ISA for devices with USB support to
...
AVR_ISA_XMEGAU
* include/opcode/avr.h: Rename AVR_ISA_XCH to AVR_ISA_RMW. Remove
from AVR_ISA_XMEGA and add new AVR_ISA_XMEGAU
2013-06-01 07:14:44 +00:00
c679469487
2013-05-06 Sandra Loosemore <sandra@codesourcery.com>
...
* COPYING.NEWLIB: Add Altera Corporation copyright.
2013-05-06 18:31:56 +00:00
1755232aca
* config.guess: Update from config repo.
...
* config.sub: Ditto.
2013-04-29 15:13:53 +00:00
bca6ce4282
2013-04-22 Jan-Benedict Glaw <jbglaw@lug-owl.de>
...
* Makefile.def: Sync with GCC.
* Makefile.in: Regenerate.
2013-04-22 17:11:22 +00:00
35b79fa558
2013-04-22 Jan-Benedict Glaw <jbglaw@lug-owl.de>
...
* configure.ac: Sync with GCC.
* configure: Regenerated.
2013-04-22 15:25:09 +00:00
74d17001b4
src-release: fix version look up for bfd based projects
2013-03-22 23:16:40 +00:00
349693687a
* configure.ac: Sync with GCC repo.
...
* configure: Ditto.
2013-02-15 17:55:25 +00:00
51ab11f758
PR go/55969
...
* configure.ac: Disable libgo on some systems where it does not
work.
* configure: Rebuild.
2013-02-05 22:39:30 +00:00
79a97aa5ea
* configure: Regenerate after syncing config/.
2013-02-04 23:31:16 +00:00
0a7746bde6
* configure.ac: Sync with GCC repo.
...
* configure: Ditto.
* Makefile.def: Ditto.
* Makefile.in: Ditto.
2013-01-15 21:47:02 +00:00
8af6a76ee6
* ChangeLog: Fix typo.
2013-01-12 03:46:44 +00:00
0ad26aec5b
Sync the root .gitignore file with GCC's.
2013-01-11 15:17:35 +00:00
19c808883d
* ChangeLog: Fix "Dito" to "Ditto".
2013-01-11 13:10:17 +00:00
35913a8d36
* config.sub: Update from config repo.
2013-01-11 12:57:41 +00:00
2880becf0c
* Makefile.tpl (BOOT_ADAFLAGS): Remove -gnata.
...
* Makefile.in: Regenerate.
2013-01-11 11:48:54 +00:00
780cf190d6
Build gmp before configuring gcc
...
* Makefile.def (configure-gcc): Depend on all-gmp.
(all-gcc): Remove dependency on all-gmp.
* Makefile.in: Regenerated.
2013-01-10 17:02:01 +00:00
7dadae9fbc
* config.guss: Update from config repo.
...
* config.sub: Dito.
2013-01-08 22:42:34 +00:00
0c2c3ac839
2013-01-07 Jeff Johnston <jjohnstn@redhat.com>
...
* COPYING.LIBGLOSS: Remove license for mips/lsi33k-stub.h which no longer
exists and replace the new bfin license in its location.
2013-01-07 21:39:26 +00:00
24b70a72d5
Add missing gas dependency
...
PR gas/14899
* Makefile.def (dependencies): Make all-binutils, all-gprof,
all-ld and all-gold depend on all-gas.
* Makefile.in: Regenerated.
2013-01-07 17:16:04 +00:00
b3a2ca7b72
Sync config.guess and config.sub with GCC
2013-01-07 17:13:22 +00:00
dfbb1d0383
* Makefile.def (install-target-libgo): Depend on
...
install-target-libatomic. Merged from GCC repo.
* Makefile.in: Regenerate.
2012-12-20 21:59:17 +00:00
3c90302d41
2012-12-17 Jeff Johnston <jjohnstn@redhat.com>
...
* COPYING.LIBGLOSS: Add license for bfin libgloss.
2012-12-17 17:46:09 +00:00
0d6e26f8ff
* configure.ac (ENABLE_GOLD): Consider *-*-gnu* targets ELF.
...
* configure: Regenerate.
2012-12-16 07:10:07 +00:00
60f901f4a9
Add --with-build-config=bootstrap-asan support
...
* Makefile.def (target_modules): Add bootstrap=true and
raw_cxx=true to libsanitizer.
* configure.ac (bootstrap_target_libs): Add libsanitizer.
* Makefile.in: Regenerated.
* configure: Likewise.
2012-12-12 13:52:58 +00:00
c15ed8f5a5
* config.sub: Merge from config repo.
2012-12-08 00:02:34 +00:00
8f9046ae61
Merge g++/xg++ changes from GCC
...
* configure.ac: Merge from GCC.
* Makefile.tpl: Dito.
* Makefile.in: Dito.
* configure: Dito.
2012-11-30 15:02:40 +00:00
0d829d9695
Disable libsanitizer for non-C++ builds.
...
* configure.ac (noconfigdirs): Merge from GCC.
* configure: Regenerate.
2012-11-28 11:43:47 +00:00
c342c2eb57
2012-11-19 Jan-Benedict Glaw <jbglaw@lug-owl.de>
...
* config.sub (arm): Merge from upstream: Handle armv[6-8] targets.
2012-11-19 22:03:01 +00:00
7400cd5bbe
Restore "Consider *-*-nacl* targets ELF for gold"
...
* configure.ac (ENABLE_GOLD): Consider *-*-nacl* targets ELF.
* configure: Regenerate.
2012-11-15 14:10:39 +00:00
5094cf2116
Sync toplevel files with GCC
...
2012-11-13 Richard Henderson <rth@redhat.com>
* configure.ac: Move libsanitizer logic to subdirectory.
* configure: Regenerate.
2012-11-13 Dodji Seketeli <dodji@redhat.com>
* configure.ac: Enable libsanitizer just on x86 linux for now.
* configure: Re-generate.
2012-11-13 David Edelsohn <dje.gcc@gmail.com>
* configure.ac: Merge libquadmath sections.
* configure: Regenerate.
2012-11-12 Wei Mi <wmi@google.com>
* configure.ac: Add libsanitizer to target_libraries.
* Makefile.def: Ditto.
* configure: Regenerate.
* Makefile.in: Regenerate.
2012-11-15 00:16:49 +00:00
5ec30f78e3
Add --disable-libstdcxx configure option
...
2012-11-03 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
2012-11-03 Robert Mason <rbmj@verizon.net>
* configure.ac: add --disable-libstdcxx configure option
and handle defaulted state only for VxWorks, ARM-wince-pe and AVR.
2012-11-04 00:09:53 +00:00
738ff2e83e
* configure.ac (FLAGS_FOR_TARGET,target=cygwin): Fix for building
...
against Mingw64 w32api.
* configure: Regenerate.
2012-10-24 13:41:36 +00:00
d25fac7114
PR bootstrap/54820
...
* configure.ac (have_static_libs): Force 'no' for GCC version < 4.5.
* configure: Regenerate.
2012-10-23 23:02:33 +00:00
e885309220
PR bootstrap/54820
...
* Makefile.tpl (STAGE1_FLAGS_TO_PASS): New variable.
(all-[+prefix+][+module+]): Pass stage1_args to sub-makes.
(all-stage[+id+]-[+prefix+][+module+]): Likewise, if prev is false.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, if prev is false.
(host_modules): Set stage1_args to STAGE1_FLAGS_TO_PASS.
* Makefile.in: Regenerate.
* configure.ac (have_static_libs): New variable and associated check.
(stage1-ldflags): Move to after stage1_libs and set to -static-libstdc++
-static-libgcc if stage1_libs is empty and have_static_libs is yes.
* configure: Regenerate.
2012-10-22 07:32:04 +00:00
52985c1686
config.{guess,sub}: update from upstream config-patches repo
...
From: David Holsgrove <david.holsgrove@xilinx.com>
Adds microblaze little endian support.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-10-11 16:04:17 +00:00
125bb3c9ea
Sync toplevel files with GCC tree
...
2012-09-28 Ian Lance Taylor <iant@google.com>
* Makefile.def: Make all-target-libgo depend on
all-target-libbacktrace.
* Makefile.in: Rebuild.
2012-09-26 Ian Lance Taylor <iant@google.com>
* Makefile.def: Make all-gcc depend on all-libbacktrace.
* Makefile.in: Rebuild.
2012-09-06 Diego Novillo <dnovillo@google.com>
* configure.ac: Bump minimum GMP version to 4.2.3.
* configure: Re-generate.
2012-09-05 Georg-Johann Lay <avr@gjlay.de>
PR target/54461
* configure.ac (noconfigdirs,target=avr-*-*): Add target-newlib,
target-libgloss if not configured --with-avrlibc=no.
* configure: Regenerate.
2012-09-04 Jason Merrill <jason@redhat.com>
* configure.ac: Fix --enable-languages=all.
2012-09-03 Richard Guenther <rguenther@suse.de>
PR bootstrap/54138
* configure.ac: Re-organize ISL / CLOOG checks to allow
disabling with either --without-isl or --without-cloog.
* configure: Regenerated.
2012-09-03 Georg-Johann Lay <avr@gjlay.de>
* configure.ac (noconfigdirs,target=avr): Add target-libquadmath.
* configure: Regenerate.
2012-09-29 15:35:53 +00:00
7e86b13b12
2012-09-21 Steve Ellcey <sellcey@mips.com>
...
* configure.ac: Add mips*-mti-elf* target.
* configure: Regenerate.
2012-09-21 15:16:59 +00:00
0c770d168d
* configure.ac (host_libs): Add libbacktrace.
...
(target_libraries): Add libbacktrace.
* Makefile.def (host_modules): Add libbacktrace.
(target_modules): Likewise.
* configure, Makefile.in: Rebuild.
2012-09-20 00:04:27 +00:00
91310ef88d
Moved the Changelog entries for breakpoint.c and remote.c out of Changelog
...
and into gdb/Changelog.
2012-09-17 20:39:12 +00:00
a271d2e310
Add support for tilegx in gold.
...
* configure.ac (ENABLE_GOLD): support tilegx*
* configure: rebuild
elfcpp:
* tilegx.h: New file.
* elfcpp.h: add EM_TILEGX.
gold:
* tilegx.cc: New file.
* Makefile.am (TARGETSOURCES): Add tilegx.cc
(ALL_TARGETOBJS): Add tilegx.$(OBJEXT)
* configure.tgt: Add entries for tilegx*.
* configure.ac: Likewise.
* Makefile.in: Rebuild.
* configure: Likewise.
* testsuite/icf_safe_test.sh (arch_specific_safe_fold): Handle
tilegx.
2012-09-15 17:11:26 +00:00
ddb7b65aaa
PR target/38607
...
Merge upstream change.
* libtool.m4 (_LT_COMPILER_PIC): Add -fPIC to GCC and GXX for AIX.
* configure.ac: Add target-libquadmath to noconfigdirs for AIX.
Add libgomp*.o to compare_exclusions for AIX.
* configure: Regenerate.
2012-09-14 23:55:22 +00:00
d9eaa4f603
* gdb/remote.c (remote_insert_hw_breakpoint): Throw exception if
...
there is an error inserting hardware breakpoints and use the
error message from the target.
* gdb/breakpoint.c (insert_bp_location, insert_breakpoint_locations):
Catch this exception and print the error message contained within. Do not
print the default hardware error breakpoint message in this case.
2012-09-12 20:01:10 +00:00
8f946e7bf1
Don't set HOST_LIB_PATH_bfd/HOST_LIB_PATH_opcodes
...
PR binutils/4970
* Makefile.def (host_modules): Rmove lib_path=.libs from bfd
and opcodes.
* Makefile.in: Regenerated.
2012-08-26 14:41:28 +00:00
a626f4eeb0
Sync toplevel files with GCC tree
...
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch.
* Makefile.tpl (STAGE[+id+]_CXXFLAGS): Remove
POSTSTAGE1_CONFIGURE_FLAGS.
* Makefile.in: Regenerate.
* configure.ac (ENABLE_BUILD_WITH_CXX): Remove. Update all users.
Force C++ when bootstrapping.
* configure: Regenerate.
2012-07-06 Richard Guenther <rguenther@suse.de>
* Makefile.def (cloog): Pass $(HOST_GMPINC) and $(HOST_ISLINC)
as CPPFLAGS, pass path to built gmp as LDFLAGS, always use
--with-gmp=system.
* Makefile.in: Regenerated.
* configure: Likewise.
2012-07-06 Richard Guenther <rguenther@suse.de>
* configure.ac (extra_isl_gmp_configure_flags): Initialize and subst.
* Makefile.def (isl): Use extra_isl_gmp_configure_flags and
supply V=1 as extra_make_flags.
* configure: Regenerated.
* Makefile.in: Likewise.
2012-07-03 Richard Guenther <rguenther@suse.de>
* Makfile.def (isl): Remove not necessary extra_exports and
extra_make_flags.
(cloog): Use $$CPPFLAGS instead of ${CPPFLAGS}.
* Makefile.in: Regenerated.
2012-07-03 Richard Guenther <rguenther@suse.de>
* Makefile.def (cloog): Add V=1 to extra_make_flags.
* configure.ac: If either the ISL or the CLooG check failed
do not try to build in-tree versions.
* Makefile.in: Regenerated.
* configure: Regenerated.
2012-07-02 Richard Guenther <rguenther@suse.de>
Michael Matz <matz@suse.de>
Tobias Grosser <tobias@grosser.es>
Sebastian Pop <sebpop@gmail.com>
* Makefile.def: Add ISL host module, remove PPL host module.
Adjust ClooG host module to use the proper ISL.
* Makefile.tpl: Pass ISL include flags instead of PPL ones.
* configure.ac: Include config/isl.m4. Add ISL host library,
remove PPL. Remove PPL configury, add ISL configury, adjust
ClooG configury.
* Makefile.in: Regenerated.
* configure: Likewise.
2012-07-02 Richard Guenther <rguenther@suse.de>
Merge from graphite branch
2011-07-21 Tobias Grosser <tobias@grosser.es>
* configure: Regenerated.
* config/cloog.m4: Remove support for CLooG-ppl and CLooG-parma,
both cloog.org and legacy versions. The only supported version will
be CLooG with the isl backend.
2011-07-21 Tobias Grosser <tobias@grosser.es>
* configure: Regenerated.
* configure.ac: Require cloog isl 0.17.0
2011-07-21 Tobias Grosser <tobias@grosser.es>
* configure: Regenerated.
* config/cloog.m4: Do not define CLOOG_ORG
2012-06-29 Steven Bosscher <steven@gcc.gnu.org>
* configure.ac: Skip C if explicitly selected.
* configure: Regenerate.
2012-06-28 Christophe Lyon <christophe.lyon@st.com>
* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Make sure
they contain -O2.
* configure: Regenerate.
2012-06-20 Jason Merrill <jason@redhat.com>
* Makefile.tpl (check-target-libgomp-c++): New.
(check-target-libitm-c++): New.
* Makefile.def (c++): Add them.
* Makefile.in: Regenerate.
2012-05-16 Olivier Hainque <hainque@adacore.com>
* Makefile.tpl (gcc-no-fixedincludes): Rename into ...
(gcc-install-no-fixedincludes): Now forwarder to local target in gcc/
(install-no-fixedincludes): Adjust accordingly.
* Makefile.in: Regenerate.
2012-05-09 Nick Clifton <nickc@redhat.com>
Paul Smith <psmith@gnu.org>
PR bootstrap/50461
* configure.ac (mpfr-dir): When using in-tree MPFR sources
allow for the fact that from release v3.1.0 of MPFR the source
files were moved into a src sub-directory.
* configure: Regenerate.
2012-05-07 Janne Blomqvist <jb@gcc.gnu.org>
* configure.ac: Bump minimum MPFR version to 2.4.0.
* configure: Regenerated.
2012-05-01 Richard Henderson <rth@redhat.com>
* Makefile.def (libatomic): New target_module.
* configure.ac (target_libraries): Add libatomic.
(noconfigdirs): Check if libatomic is supported.
* Makefile.in, configure: Rebuild.
config/
2012-08-26 Art Haas <ahaas@impactweather.com>
* cloog.m4 (CLOOG_INIT_FLAGS): Use = instead of == in test.
2012-07-04 Tristan Gingold <gingold@adacore.com>
* isl.m4 (ISL_CHECK_VERSION): Set to yes if cross-compiling.
Fix comments.
2012-07-03 Richard Guenther <rguenther@suse.de>
* cloog.m4: Remove debugging print.
2012-07-03 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* isl.m4 (ISL_CHECK_VERSION): Add -lisl to LIBS, not LDFLAGS.
2012-07-02 Richard Guenther <rguenther@suse.de>
* isl.m4 (_ISL_CHECK_CT_PROG): Omit main function header/footer.
Fix version test.
2012-07-02 Richard Guenther <rguenther@suse.de>
Michael Matz <matz@suse.de>
Tobias Grosser <tobias@grosser.es>
Sebastian Pop <sebpop@gmail.com>
* cloog.m4: Set up to work against ISL only.
* isl.m4: New file.
2012-08-26 14:34:40 +00:00
2703411981
Sync libtool.m4 with GCC tree
...
2012-05-15 H.J. Lu <hongjiu.lu@intel.com>
Merge upstream change
* libtool.m4 (_LT_ENABLE_LOCK): Support x32.
2011-11-21 Andreas Tobler <andreast@fgznet.ch>
* libtool.m4: Additional FreeBSD 10 fixes.
2012-08-26 14:09:08 +00:00
27c4e2e1ee
* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Make sure
...
they contain -O2.
* configure: Regenerate.
2012-06-28 11:50:52 +00:00
77009cee1e
Add support for PowerPC VLE.
...
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 19:45:27 +00:00
991addc261
MAINTAINERS: clarify policy with config/ (and other top level files)
...
Rather than copy & paste more text, just merge the existing config/
section with the existing intl/ section. This ends up clarifying
the policy with that subdir (and top level files) that any commit
made to gcc's repo is allowed to be merged with the sourceware tree
without pre-approval.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-05-12 03:10:17 +00:00
Mike Stump
Richard Sandiford
Denis Chertykov
Jeff Johnston
Jan-Benedict Glaw
Michael Frysinger
Yufeng Zhang
Ian Lance Taylor
Alan Modra
Joel Brobecker
Eric Botcazou
H.J. Lu
Thomas Schwinge
Corinna Vinschen
Steve Ellcey
Mike Wrighton
Walter Lee
David Edelsohn
Alexandre Oliva
James Lemke