Commit Graph

561 Commits

Author SHA1 Message Date
DJ Delorie edc9603e2c [include/opcode]
* rx.h (RX_Operand_Type): Add TwoReg.
(RX_Opcode_ID): Remove ediv and ediv2.

[opcodes]

* rx-decode.opc (SRR): New.
(rx_decode_opcode): Use it for movbi and movbir.  Decode NOP2 (mov
r0,r0) and NOP3 (max r0,r0) special cases.
* rx-decode.c: Regenerate.

[sim/rx]

* rx.c (decode_cache_base): New.
(id_names): Remove ediv and edivu.
(optype_names): Add TwoReg.
(maybe_get_mem_page): New.
(rx_get_byte): Call it.
(get_op): Add TwoReg support.
(put_op): Likewise.
(PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode"
is a pointer now.
(DO_RETURN): New.  We use longjmp to return an exception result.
(decode_opcode): Make opcode a pointer to the decode cache.  Save
decoded opcode information and re-use.  Call DO_RETURN instead of
return throughout.  Remove ediv and edivu.
* mem.c (ptdc): New.  Adds decode cache.
(rx_mem_ptr): Support it.
(rx_mem_decode_cache): New.
* mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE.
(rx_mem_decode_cache): Declare.
* gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here...
* main.c (main): ...and here.  Use a fast loop if neither trace
nor disassemble is given.
* cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED,
RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a
valid code for anything.
2010-07-29 18:41:26 +00:00
DJ Delorie f4b40e3b3e [sim/rx]
* README.txt: New.
* config.h (CYCLE_ACCURATE, CYCLE_STATS): New.
* configure.in (--enable-cycle-accurate, --enable-cycle-stats):
New.  Default to enabled.
* configure: Regenerate.

* cpu.h (regs_type): Add cycle tracking info.
(reset_pipeline_stats): Declare.
(halt_pipeline_stats): Declare.
(pipeline_stats): Declare.
* main.c (done): Call pipeline_stats().
* mem.h (rx_mem_ptr): Moved to here ...
* mem.c (mem_ptr): ... from here.  Rename throughout.
(mem_put_byte): Move LEDs to Port A.  Add Port B to control cycle
statistics.  Move UART to SCI4.
(mem_put_hi): Add TPU 1-2.  TPU 1 and 2 count CPU cycles.
* reg.c (init_regs): Set Rt reg to -1 (no reg).
* rx.c: Add cycle counting and statistics throughout.
(rx_get_byte): Optimize for speed.
(decode_opcode): Likewise.
(reset_pipeline_stats): New.
(halt_pipeline_stats): New.
(pipeline_stats): New.
* trace.c (sim_disasm_one): Print cycle count.

[include/opcode]
* rx.h (RX_Opcode_ID): Add nop2 and nop3 for statistics.
2010-07-28 21:58:22 +00:00
Nick Clifton e3d36b30b4 Add support for v850E2 and v850E2V3 2010-07-23 14:52:53 +00:00
Maciej W. Rozycki f599b05497 gas/
* config/tc-mips.c (nops_for_insn_or_target): Replace
	MIPS16_INSN_BRANCH with MIPS16_INSN_UNCOND_BRANCH and
	MIPS16_INSN_COND_BRANCH.

	include/opcode/
	* mips.h (MIPS16_INSN_UNCOND_BRANCH): New macro.
	(MIPS16_INSN_BRANCH): Rename to...
	(MIPS16_INSN_COND_BRANCH): ... this.

	opcodes/
	* mips-dis.c (print_mips16_insn_arg): Remove branch instruction
	type and delay slot determination.
	(print_insn_mips16): Extend branch instruction type and delay
	slot determination to cover all instructions.
	* mips16-opc.c (BR): Remove macro.
	(UBR, CBR): New macros.
	(mips16_opcodes): Update branch annotation for "b", "beqz",
	"bnez", "bteqz" and "btnez".  Add branch annotation for "jalrc"
	and "jrc".
2010-07-06 00:02:44 +00:00
Alan Modra daa7111808 include/opcode/
* ppc.h (PPC_OPCODE_32, PPC_OPCODE_BOOKE64, PPC_OPCODE_CLASSIC): Delete.
	Renumber other PPC_OPCODE defines.
gas/
	* config/tc-ppc.c (ppc_set_cpu): Remove old opcode flags.
	(ppc_setup_opcodes): Likewise.  Simplify opcode selection.
opcodes/
	* ppc-dis.c (ppc_opts, powerpc_init_dialect): Remove old opcode flags.
	* ppc-opc.c (PPC32, POWER32, COM32, CLASSIC): Delete.
	(PPC64, MFDEC2): Update.
	(NON32, NO371): Define.
	(powerpc_opcode): Update to not use old opcode flags, and avoid
	-m601 duplicates.
2010-07-03 06:51:53 +00:00
Alan Modra dc43a4fd11 * ppc.h (PPC_OPCODE_COMMON): Expand comment. 2010-07-03 03:32:50 +00:00
Alan Modra 37cd59cbef remove maxq-coff port 2010-06-29 04:17:27 +00:00
Alan Modra b775136014 gas/
* config/tc-ppc.c (md_assemble): Emit APUinfo section for
	PPC_OPCODE_E500.
gas/testsuite/
	* gas/ppc/e500.s: Add eieio, mbar and lwsync
	* gas/ppc/e500.d: Likewise.
include/opcode/
	* ppc.h (PPC_OPCODE_E500): Define.
opcodes/
	* ppc-dis.c (ppc_opts):  Remove PPC_OPCODE_E500MC from e500 and
	e500x2. Add PPC_OPCODE_E500 to e500 and e500x2
	* ppc-opc.c (powerpc_opcodes): Deprecate all opcodes on EFS which
	touch floating point regs and are enabled by COM, PPC or PPCCOM.
	Treat sync as msync on e500.  Treat eieio as mbar 1 on e500.
	Treat lwsync as msync on e500.
2010-06-14 14:48:04 +00:00
Catherine Moore 60321a0733 gas/
* config/tc-mips.c (is_opcode_valid): Remove expansionp.
	(macro_build): Change invocation of is_opcode_valid.
	(mips_ip): Likewise.

	gas/testsuite/
	* gas/mips/mips-no-jalx.l: Delete.
	* gas/mips/mips-no-jalx.s: Delete.
	* gas/mips/mips-jalx-2.d: New.
	* gas/mips/mips-jalx-2.s: New.
	* gas/mips/mips.exp (mips-jalx-2): Run new test.
	(mips-no-jalx): Remove deleted test.

	include/
	* opcode/mips.h (INSN_MIPS16): Remove.

	opcodes/
	* mips-dis.c (mips_arch): Remove INSN_MIPS16.
	* mips-opc.c (I16): Remove.
	(mips_builtin_op): Reclassify jalx.
2010-05-26 12:59:56 +00:00
Joseph Myers 3ee7760b3e gas/testsuite:
* gas/tic6x/insns-c674x.s, gas/tic6x/insns-c674x.d: Also test
	"b .S2 b3".

include/opcode:
	* tic6x-insn-formats.h (s_branch): Correct typo in bitmask.
2010-04-21 18:56:45 +00:00
Nick Clifton e63d7c5914 Upgrade header files to use GPLv3 2010-04-15 10:26:09 +00:00
Joseph Myers 86a58929ba bfd:
* Makefile.am (ALL_MACHINES): Add cpu-tic6x.lo.
	(ALL_MACHINES_CFILES): Add cpu-tic6x.c.
	(BFD32_BACKENDS): Add elf32-tic6x.lo.
	(BFD32_BACKENDS_CFILES): Add elf32-tic6x.c.
	* Makefile.in: Regenerate.
	* archures.c (bfd_arch_tic6x, bfd_tic6x_arch): New.
	(bfd_archures_list): Update.
	* config.bfd (tic6x-*-elf): New.
	* configure.in (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec):
	New.
	* configure: Regenerate.
	* cpu-tic6x.c, elf32-tic6x.c: New.
	* reloc.c (BFD_RELOC_C6000_PCR_S21, BFD_RELOC_C6000_PCR_S12,
	BFD_RELOC_C6000_PCR_S10, BFD_RELOC_C6000_PCR_S7,
	BFD_RELOC_C6000_ABS_S16, BFD_RELOC_C6000_ABS_L16,
	BFD_RELOC_C6000_ABS_H16, BFD_RELOC_C6000_SBR_U15_B,
	BFD_RELOC_C6000_SBR_U15_H, BFD_RELOC_C6000_SBR_U15_W,
	BFD_RELOC_C6000_SBR_S16, BFD_RELOC_C6000_SBR_L16_B,
	BFD_RELOC_C6000_SBR_L16_H, BFD_RELOC_C6000_SBR_L16_W,
	BFD_RELOC_C6000_SBR_H16_B, BFD_RELOC_C6000_SBR_H16_H,
	BFD_RELOC_C6000_SBR_H16_W, BFD_RELOC_C6000_SBR_GOT_U15_W,
	BFD_RELOC_C6000_SBR_GOT_L16_W, BFD_RELOC_C6000_SBR_GOT_H16_W,
	BFD_RELOC_C6000_DSBT_INDEX, BFD_RELOC_C6000_PREL31,
	BFD_RELOC_C6000_COPY, BFD_RELOC_C6000_ALIGN,
	BFD_RELOC_C6000_FPHEAD, BFD_RELOC_C6000_NOCMP): New.
	* targets.c (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec): New.
	(_bfd_target_vector): Update.
	* bfd-in2.h, libbfd.h: Regenerate.

binutils:
	* MAINTAINERS: Add self as TI C6X maintainer.
	* NEWS: Add news entry for TI C6X support.
	* readelf.c: Include elf/tic6x.h.
	(guess_is_rela): Handle EM_TI_C6000.
	(dump_relocations): Likewise.
	(get_tic6x_dynamic_type): New.
	(get_dynamic_type): Call it.
	(get_machine_flags): Handle EF_C6000_REL.
	(get_osabi_name): Handle machine-specific values only for relevant
	machines.  Handle C6X values.
	(get_tic6x_segment_type): New.
	(get_segment_type): Call it.
	(get_tic6x_section_type_name): New.
	(get_section_type_name): Call it.
	(is_32bit_abs_reloc, is_16bit_abs_reloc, is_none_reloc): Handle
	EM_TI_C6000.

gas:
	* Makefile.am (TARGET_CPU_CFILES): Add config/tc-tic6x.c.
	(TARGET_CPU_HFILES): Add config/tc-tic6x.h.
	* Makefile.in: Regenerate.
	* NEWS: Add news entry for TI C6X support.
	* app.c (do_scrub_chars): Handle "||^" for TI C6X.  Handle
	TC_PREDICATE_START_CHAR and TC_PREDICATE_END_CHAR.  Keep spaces in
	operands if TC_KEEP_OPERAND_SPACES.
	* configure.tgt (tic6x-*-*): New.
	* config/tc-ia64.h (TC_PREDICATE_START_CHAR,
	TC_PREDICATE_END_CHAR): Define.
	* config/tc-tic6x.c, config/tc-tic6x.h: New.
	* doc/Makefile.am (CPU_DOCS): Add c-tic6x.texi.
	* doc/Makefile.in: Regenerate.
	* doc/all.texi (TIC6X): Define.
	* doc/as.texinfo: Add TI C6X documentation.  Include c-tic6x.texi.
	* doc/c-tic6x.texi: New.

gas/testsuite:
	* gas/tic6x: New directory and testcases.

include:
	* dis-asm.h (print_insn_tic6x): Declare.

include/elf:
	* common.h (ELFOSABI_C6000_ELFABI, ELFOSABI_C6000_LINUX): Define.
	* tic6x.h: New.

include/opcode:
	* tic6x-control-registers.h, tic6x-insn-formats.h,
	tic6x-opcode-table.h, tic6x.h: New.

ld:
	* Makefile.am (ALL_EMULATIONS): Add eelf32_tic6x_be.o and
	eelf32_tic6x_le.o.
	(eelf32_tic6x_be.c, eelf32_tic6x_le.c): New.
	* NEWS: Add news entry for TI C6X support.
	* configure.tgt (tic6x-*-*): New.
	* emulparams/elf32_tic6x_be.sh, emulparams/elf32_tic6x_le.sh: New.

ld/testsuite:
	* ld-elf/flags1.d, ld-elf/merge.d: XFAIL for tic6x-*-*.
	* ld-elf/sec-to-seg.exp: Set B_test_same_seg to 0 for tic6x-*-*.
	* ld-tic6x: New directory and testcases.

opcodes:
	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add tic6x-dis.c.
	* Makefile.in: Regenerate.
	* configure.in (bfd_tic6x_arch): New.
	* configure: Regenerate.
	* disassemble.c (ARCH_tic6x): Define if ARCH_all.
	(disassembler): Handle TI C6X.
	* tic6x-dis.c: New.
2010-03-25 21:12:32 +00:00
Nick Clifton 39f7d1762b * config/tc-mips.c (mips_fix_loongson2f, mips_fix_loongson2f_nop,
mips_fix_loongson2f_jump): New variables.
        (md_longopts): Add New options -mfix-loongson2f-nop/jump,
        -mno-fix-loongson2f-nop/jump.
        (md_parse_option): Initialize variables via above options.
        (options): New enums for the above options.
        (md_begin): Initialize nop_insn from LOONGSON2F_NOP_INSN.
        (fix_loongson2f, fix_loongson2f_nop, fix_loongson2f_jump):
        New functions.
        (append_insn): call fix_loongson2f().
        (mips_handle_align): Replace the implicit nops.
        * config/tc-mips.h (MAX_MEM_FOR_RS_ALIGN_CODE): Modified
        for the new mips_handle_align().
        * doc/c-mips.texi: Document the new options.

        * gas/mips/loongson-2f-2.s: New test of -mfix-loongson2f-nop.
        * gas/mips/loongson-2f-2.d: Likewise.
        * gas/mips/loongson-2f-3.s: New test of -mfix-loongson2f-jump.
        * gas/mips/loongson-2f-3.d: Likewise.
        * gas/mips/mips.exp: Run the new tests.

        * opcode/mips.h (LOONGSON2F_NOP_INSN): New macro.
2010-02-25 11:15:48 +00:00
Alan Modra 72e44746dc missed from last commit 2010-02-08 02:04:05 +00:00
Alan Modra e97038e0dd include/
* opcode/ppc.h (PPC_OPCODE_TITAN): Define.
bfd/
	* archures.c (bfd_mach_ppc_titan): Define.
	* bfd-in2.h: Regenerate.
	* cpu-powerpc.c (bfd_powerpc_archs): Add titan entry.
opcodes/
	* ppc-dis.c (ppc_opts): Add titan entry.
	* ppc-opc.c (TITAN, MULHW): Define.
	(powerpc_opcodes): Support AppliedMicro Titan core (APM83xxx).
gas/
	* config/tc-ppc.c (md_show_usage): Mention -mtitan.  Don't use tabs.
	(ppc_mach): Handle titan.
	* doc/c-ppc.texi: Mention -mtitan.
gas/testsuite/
	* gas/ppc/titan.d, * gas/ppc/titan.s: New test.
	* gas/ppc/ppc.exp: Run it.
2010-02-08 01:59:33 +00:00
H.J. Lu 491912bffe Remove argument name.
2010-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* ia64.h (ia64_find_opcode): Remove argument name.
	(ia64_find_next_opcode): Likewise.
	(ia64_dis_opcode): Likewise.
	(ia64_free_opcode): Likewise.
	(ia64_find_dependency): Likewise.
2010-01-14 15:18:42 +00:00
Doug Evans 83fb2eceda * cgen.h: Include bfd_stdint.h.
(CGEN_INSN_LGSINT, CGEN_INSN_LGUINT): New types.
2009-11-23 03:56:29 +00:00
Paul Brook edabf07696 2009-11-18 Paul Brook <paul@codesourcery.com>
gas/
	* config/tc-arm.c (arm_fpus): Add fpv4-sp-d16.
	(aeabi_set_public_attributes): Correctly mark VFPv3xD.

	include/opcode/
	* arm.h (FPU_VFP_V4_SP_D16, FPU_ARCH_VFP_V4_SP_D16): Define.
2009-11-18 15:48:59 +00:00
Paul Brook dd3a778c28 2009-11-17 Paul Brook <paul@codesourcery.com>
Daniel Jacobowitz  <dan@codesourcery.com>

	gas/
	* doc/c-arm.texi: Document .arch armv7e-m.
	* config/tc-arm.c (arm_ext_v6_dsp, arm_ext_v7m): New.
	(insns): Put Thumb versions of v5TExP instructions into
	arm_ext_v5exp also.  Move some Thumb variants from
	arm_ext_v6_notm to arm_ext_v6_dsp.
	(arm_archs): Add armv7e-m architecture.
	(aeabi_set_public_attributes): Handle -march=armv7e-m.

	gas/testsuite/
	* gas/arm/attr-march-armv7em.d: New test.
	* gas/arm/arch7em-bad.d: New test.
	* gas/arm/arch7em-bad.l: New test.
	* gas/arm/arch7em.d: New test.
	* gas/arm/arch7em.s: New test.

	include/elf/
	* arm.h (TAG_CPU_ARCH_V7E_M): Define.

	include/opcode/
	* arm.h (ARM_EXT_V6_DSP): Define.
	(ARM_AEXT_V6T2, ARM_AEXT_NOTM): Include ARM_EXT_V6_DSP.
	(ARM_AEXT_V7EM, ARM_ARCH_V7EM): Define.

	binutils/
	* readelf.c (arm_attr_tag_CPU_arch): Add v7E-M.

	bfd/
	* elf32-arm.c (using_thumb_only, arch_has_arm_nop,
	arch_has_thumb2_nop): Handle TAG_CPU_ARCH_V7E_M.
	(tag_cpu_arch_combine): Ditto. Correct MAX_TAG_CPU_ARCH test.
2009-11-17 16:31:56 +00:00
DJ Delorie 4988840b3b [opcodes]
* rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
	(mvtcp, mvfcp, opecp): Remove.
	* rx-decode.c: Regenerate.
	* rx-dis.c (cpen): Remove.

[gas]
	* config/rx-parse.y (MVTIPL): Update bit pattern.
	(cpen): Remove.

[include/opcode]
	* rx.h (rx_decode_opcode) (mvtipl): Add.
	(mvtcp, mvfcp, opecp): Remove.
2009-11-05 00:38:45 +00:00
Paul Brook 09b07be520 2009-11-02 Paul Brook <paul@codesourcery.com>
ld/testsuite/
	* ld-arm/arm-elf.exp: Add new attr-merge-vfp tests.
	* ld-arm/attr-merge-vfp-1.d: New test.
	* ld-arm/attr-merge-vfp-1r.d: New test.
	* ld-arm/attr-merge-vfp-2.d: New test.
	* ld-arm/attr-merge-vfp-2r.d: New test.
	* ld-arm/attr-merge-vfp-3.d: New test.
	* ld-arm/attr-merge-vfp-3r.d: New test.
	* ld-arm/attr-merge-vfp-4.d: New test.
	* ld-arm/attr-merge-vfp-4r.d: New test.
	* ld-arm/attr-merge-vfp-5.d: New test.
	* ld-arm/attr-merge-vfp-5r.d: New test.
	* ld-arm/attr-merge-vfp-2.s: New test.
	* ld-arm/attr-merge-vfp-3.s: New test.
	* ld-arm/attr-merge-vfp-3-d16.s: New test.
	* ld-arm/attr-merge-vfp-4.s: New test.
	* ld-arm/attr-merge-vfp-4-d16.s: New test.

	gas/
	* doc/c-arm.texi: Document new -mfpu options.
	* config/tc-arm.c (fpu_vfp_ext_v3xd, fpu_vfp_fp16, fpu_neon_ext_fma,
	fpu_vfp_ext_fma): New.
	(NEON_ENC_TAB): Add vfma, vfms, vfnma and vfnms.
	(do_vfp_nsyn_fma_fms, do_neon_fmac): New functions.
	(insns): Move double precision load/store.  Split out double
	precision VFPv3 instrucitons.  Add VFPv4 instructions.
	(arm_fpus): Add VFPv3-FP16, VFPv3xD and VFPv4 variants.
	(aeabi_set_public_attributes): Set VFPv4 variants

	gas/testsuite/
	* gas/arm/attr-mfpu-vfpv4.d: New test.
	* gas/arm/attr-mfpu-vfpv4-d16.d: New test.
	* gas/arm/neon-fma-cov.d: New test.
	* gas/arm/neon-fma-cov.s: New test.
	* gas/arm/vfp-fma-inc.s: New test.
	* gas/arm/vfp-fma-arm.d: New test.
	* gas/arm/vfp-fma-arm.s: New test.
	* gas/arm/vfp-fma-thumb.d: New test.
	* gas/arm/vfp-fma-thumb.s: New test.
	* gas/arm/vfma1.d: New test.
	* gas/arm/vfma1.s: New test.
	* gas/arm/vfpv3xd.d: New test.
	* gas/arm/vfpv3xd.s: New test.

	include/opcode/
	* arm.h (FPU_VFP_EXT_V3xD, FPU_VFP_EXT_FP16, FPU_NEON_EXT_FMA,
	FPU_VFP_EXT_FMA, FPU_VFP_V3xD, FPU_VFP_V4D16, FPU_VFP_V4): Define.
	(FPU_ARCH_VFP_V3D16_FP16, FPU_ARCH_VFP_V3_FP16, FPU_ARCH_VFP_V3xD,
	FPU_ARCH_VFP_V3xD_FP16, FPU_ARCH_VFP_V4, FPU_ARCH_VFP_V4D16,
	FPU_ARCH_NEON_VFP_V4): Define.

	binutils/
	* readelf.c (arm_attr_tag_VFP_arch): Add VFPv4 and VFPv4-D16.

	bfd/
	* elf32-arm.c (elf32_arm_merge_eabi_attributes): Handle VFPv4
	attributes.

	opcodes/
	* arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
	Add VFPv4 instructions.
2009-11-02 13:44:04 +00:00
Doug Evans 4c038a6101 cpu/
* m32c.opc (opc.h): cgen-types.h -> cgen/basic-modes.h.
	cgen-ops.h -> cgen/basic-ops.h.

	include/opcode/
	* cgen-bitset.h: Delete, moved to ../cgen/bitset.h.
	* cgen.h: Update.  Improve multi-inclusion macro name.

	include/cgen/
	* basic-modes.h: New file.  Moved here from opcodes/cgen-types.h.
	* basic-ops.h: New file.  Moved here from opcodes/cgen-ops.h.
	* bitset.h: New file.  Moved here from ../opcode/cgen-bitset.h.
	Update license to GPL v3.

	opcodes/
	* cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
	* cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
	* cgen-bitset.c: Update.
	* fr30-desc.h: Regenerate.
	* frv-desc.h: Regenerate.
	* ip2k-desc.h: Regenerate.
	* iq2000-desc.h: Regenerate.
	* lm32-desc.h: Regenerate.
	* m32c-desc.h: Regenerate.
	* m32c-opc.h: Regenerate.
	* m32r-desc.h: Regenerate.
	* mep-desc.h: Regenerate.
	* mt-desc.h: Regenerate.
	* openrisc-desc.h: Regenerate.
	* xc16x-desc.h: Regenerate.
	* xstormy16-desc.h: Regenerate.
2009-10-24 00:17:08 +00:00
Peter Bergner 0e03c708be gas/
* config/tc-ppc.c (md_show_usage): Document -m476.
	* doc/c-ppc.texi (PowerPC-Opts): Document -m476.

gas/testsuite/
	* gas/ppc/476.s: New test.
	* gas/ppc/476.d: Likewise.
	* gas/ppc/ppc.exp: Run the 476 test.

include/opcode/
	* ppc.h (PPC_OPCODE_476): Define.

opcodes/
	* ppc-dis.c (ppc_opts): Add "476" entry.
	* ppc-opc.c (PPC476): Define.
	(powerpc_opcodes): Update mnemonics where required for 476.
2009-10-02 14:42:42 +00:00
Peter Bergner 182f0f0f8c gas/
* config/tc-ppc.c (md_show_usage): Rename "ppca2" to "a2".
	* doc/c-ppc.texi (PowerPC-Opts): Likewise.

gas/testsuite/
	* gas/ppc/a2.d: Rename "ppca2" to "a2".

include/opcode/
	* ppc.h (PPC_OPCODE_A2): Rename from PPC_OPCODE_PPCA2.

opcodes/
	* ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
	* ppc-dis.c (ppc_opts): Likewise.
	Rename "ppca2" to "a2".
2009-10-01 19:24:48 +00:00
Nick Clifton 55c20b09b7 bfd
* Makefile.am (ALL_MACHINES): Add cpu-rx.lo.
        (ALL_MACHINES_CFILES): Add cpu-rx.c.
        (BFD32_BACKENDS): Add elf32-rx.lo.
        (BFD32_BACKENDS_CFILES): Add elf32-rx.c.
        * archures.c (bfd_architecture): Add bfd_arch_rx and bfd_mach_rx.
        Export bfd_rx_arch.
        (bfd_archures_list): Add bfd_rx_arch.
        * config.bfd: Add entry for rx-*-elf.
        * configure.in: Add entries for bfd_elf32_rx_le_vec and
        bfd_elf32_rx_be_vec.
        * reloc.c: Add RX relocations.
        * targets.c: Add RX target vectors.
        * Makefile.in: Regenerate.
        * bfd-in2.h: Regenerate.
        * configure: Regenerate.
        * libbfd.h: Regenerate.
        * cpu-rx.c: New file.
        * elf32-rx.c: New file.

binutils
        * readelf.c: Add support for RX target.
        * MAINTAINERS: Add DJ and NickC as maintainers for RX.

gas
        * Makefile.am: Add RX target.
        * configure.in: Likewise.
        * configure.tgt: Likewise.
        * read.c (do_repeat_with_expander): New function.
        * read.h: Provide a prototype for do_repeat_with_expander.
        * doc/Makefile.am: Add RX target documentation.
        * doc/all.texi: Likewise.
        * doc/as.texinfo: Likewise.
        * Makefile.in: Regenerate.
        * NEWS: Mention support for RX architecture.
        * configure: Regenerate.
        * doc/Makefile.in: Regenerate.
        * config/rx-defs.h: New file.
        * config/rx-parse.y: New file.
        * config/tc-rx.h: New file.
        * config/tc-rx.c: New file.
        * doc/c-rx.texi: New file.

gas/testsuite
        * gas/rx: New directory.
        * gas/rx/*: New set of test cases.
        * gas/elf/section2.e-rx: New expected output file.
        * gas/all/gas.exp: Add support for RX target.
        * gas/elf/elf.exp: Likewise.
        * gas/lns/lns.exp: Likewise.
        * gas/macros/macros.exp: Likewise.

include
        * dis-asm.h: Add prototype for print_insn_rx.

include/elf
        * rx.h: New file.

include/opcode
        * rx.h: New file.

ld
        * Makefile.am: Add rules to build RX emulation.
        * configure.tgt: Likewise.
        * NEWS: Mention support for RX architecture.
        * Makefile.in: Regenerate.
        * emulparams/elf32rx.sh: New file.
        * emultempl/rxelf.em: New file.

opcodes
        * Makefile.am: Add RX files.
        * configure.in: Add support for RX target.
        * disassemble.c: Likewise.
        * Makefile.in: Regenerate.
        * configure: Regenerate.
        * opc2c.c: New file.
        * rx-decode.c: New file.
        * rx-decode.opc: New file.
        * rx-dis.c: New file.
2009-09-29 14:17:13 +00:00
Alan Modra 35f452c3e2 o * ppc.h (ppc_cpu_t): Typedef to uint64_t. 2009-09-22 02:36:26 +00:00
Ben Elliston 991caa7310 gas/
* config/tc-ppc.c (md_show_usage): Document -mpcca2.
	* doc/c-ppc.texi (PowerPC-Opts): Document -mppca2.

gas/testsuite/
	* gas/ppc/a2.s: New.
	* gas/ppc/a2.d: Likewise.
	* gas/ppc/ppc.exp: Run the a2 dump test.

include/opcode/
	* ppc.h (PPC_OPCODE_PPCA2): New.

opcodes/
	* ppc-dis.c (ppc_opts): Add "ppca2" entry.
	* ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
	eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
	icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
	ici mnemonics.
	(ERAT_T): New operand.
	(XWC_MASK): New mask.
	(XOPL2): New macro.
	(PPCA2): Define.
2009-09-21 10:29:07 +00:00
Nick Clifton 99790663b8 * bfd/coff-arm.c (coff_arm_relocate_section)
(record_thumb_to_arm_glue, bfd_arm_process_before_allocation):
        Change member name class to symbol_class.
        * bfd/coff-i960.c (coff_i960_relocate_section) Rename variable
        class to class_val. Change member name class to symbol_class.
        * bfd/coff-rs6000.c (_bfd_xcoff_swap_aux_in)
        (_bfd_xcoff_swap_aux_out): Rename arguments class to in_class.
        * bfd/coff-stgo32.c (adjust_aux_in_post)
        (adjust_aux_out_pre, adjust_aux_out_post): Rename arguments class
        to in_class.
        * bfd/coff64-rs6000.c (_bfd_xcoff64_swap_aux_in)
        (_bfd_xcoff64_swap_aux_out): Rename arguments class to in_class.
        * bfd/coffcode.h (coff_pointerize_aux_hook): Rename variable class
        to n_sclass.
        * bfd/coffgen.c (coff_write_symbol, coff_pointerize_aux): Rename
        variables named class to n_sclass. (coff_write_symbols): Rename
        variable class to sym_class. (bfd_coff_set_symbol_class): Rename
        argument class to symbol_class.
        * bfd/cofflink.c (_bfd_coff_link_hash_newfunc)
        (coff_link_add_symbols, _bfd_coff_link_input_bfd)
        (_bfd_coff_write_global_sym, _bfd_coff_generic_relocate_section):
        Update code to use renamed members.
        * bfd/coffswap.h (coff_swap_aux_in, coff_swap_aux_out): Rename
        argument class to in_class.
        * bfd/libcoff-in.h (struct coff_link_hash_entry, struct
        coff_debug_merge_type) Renamed members class to symbol_class and
        type_class.
        * bfd/libcoff.h Regenerated.
        * bfd/peXXigen.c: (_bfd_XXi_swap_aux_in, _bfd_XXi_swap_aux_out):
        Rename argument class to in_class.
        * bfd/pef.c (bfd_pef_parse_imported_symbol): Update code to use
        renamed members.
        * bfd/pef.h (struct bfd_pef_imported_symbol): Changed name of
        member class to symbol_class.
        * binutils/ieee.c (ieee_read_cxx_misc, ieee_read_cxx_class)
        (ieee_read_reference): Rename variables named class to cxxclass.
        * gas/config/tc-arc.c (struct syntax_classes): Rename member class
        to s_class. (arc_extinst): Rename variable class to
        s_class. Update code to use renamed members.
        * gas/config/tc-mips.c (insn_uses_reg): Rename argument class to
        regclass.
        * gas/config/tc-ppc.c (ppc_csect, ppc_change_csect, ppc_function)
        (ppc_tc, ppc_is_toc_sym, ppc_symbol_new_hook, ppc_frob_label)
        (ppc_fix_adjustable, md_apply_fix): Update code to use renamed
        members.
        * gas/config/tc-ppc.h (struct ppc_tc_sy): Change name of member
        from class to symbol_class. (OBJ_COPY_SYMBOL_ATTRIBUTES): Update
        code to use renamed members.
        * gas/config/tc-score.c (s3_adjust_paritybit): Rename argument
        class to i_class.
        * gas/config/tc-score7.c (s7_adjust_paritybit): Rename argument
        class to i_class.
        * gprof/corefile.c (core_create_function_syms): Rename variable
        class to cxxclass.
        * include/coff/ti.h (GET_LNSZ_SIZE, PUT_LNSZ_SIZE): Updated name
        of class variable to in_class to match changes in function that
        use this macro.
        * include/opcode/ia64.h (struct ia64_operand): Renamed member
        class to op_class
        * ld/emultempl/elf32.em (gld${EMULATION_NAME}_load_symbols)
        (gld${EMULATION_NAME}_try_needed): Rename variable class to
        link_class
        * opcodes/ia64-dis.c (print_insn_ia64): Update code to use renamed
        member.
        * opcodes/m88k-dis.c (m88kdis): Rename variable class to in_class.
        * opcodes/tic80-opc.c (tic80_symbol_to_value)
        (tic80_value_to_symbol): Rename argument class to symbol_class.
2009-09-05 07:56:25 +00:00
Jie Zhang ec977517dc gas/
* config/bfin-parse.y (asm_1): Implement HLT instruction.
	Fix comments for DBGA, DBGAH and DBGAL.
	* config/tc-bfin.c (bfin_gen_pseudodbg_assert): Change according
	to the new encoding of DBGA, DBGAH, and DBGAL.

	include/
	* opcode/bfin.h (PseudoDbg_Assert): Add bits_grp and mask_grp.
	(PseudoDbg_Assert_grp_bits, PseudoDbg_Assert_grp_mask): Define.
	(PseudoDbg_Assert_dbgop_bits, PseudoDbg_Assert_dbgop_mask,
	PseudoDbg_Assert_dontcare_bits, PseudoDbg_Assert_dontcare_mask):
	Adjust accordingly.
	(init_PseudoDbg_Assert): Add PseudoDbg_Assert_grp_bits and
	PseudoDbg_Assert_grp_mask.

	opcodes/
	* bfin-dis.c (decode_pseudodbg_assert_0): Change according
	to the new encoding of DBGA, DBGAH, and DBGAL.
	(_print_insn_bfin): Likewise.
2009-09-04 04:29:40 +00:00
Alan Modra 46b487005a update copyright dates 2009-09-02 07:21:40 +00:00
Nick Clifton 96d3d07383 Updated sources to avoid using the identifier name "new", which is a
keyword in c++.

        * bfd/aoutx.h (NAME (aout, make_empty_symbol)): Rename variable
        new to new_symbol.
        * bfd/coffgen.c (coff_make_empty_symbol)
        (coff_bfd_make_debug_symbol): Rename variable new to new_symbol.
        * bfd/cpu-ia64-opc.c (ext_reg, ins_imms_scaled): Rename variable
        new to new_insn.
        * bfd/doc/chew.c (newentry, add_intrinsic): Rename variable new to
        new_d.
        * bfd/ecoff.c (_bfd_ecoff_make_empty_symbol): Rename variable new
        to new_symbol.
        * bfd/elf32-m68k.c (elf_m68k_get_got_entry_type): Rename argument
        new to new_reloc.
        * bfd/hash.c (bfd_hash_lookup): Rename variable new to new_string.
        * bfd/ieee.c (ieee_make_empty_symbol): Rename variable new to
        new_symbol.
        * bfd/linker.c (bfd_new_link_order): Rename variable new to
        new_lo.
        * bfd/mach-o.c (bfd_mach_o_sizeof_headers): Rename variable new to
        symbol.
        * bfd/oasys.c (oasys_make_empty_symbol): Rename variable new to
        new_symbol_type.
        * bfd/pdp11.c (NAME (aout, make_empty_symbol)): Rename variable
        new to new_symbol_type.
        * bfd/plugin.c (bfd_plugin_make_empty_symbol): Rename variable new
        to new_symbol.
        * bfd/rs6000-core.c (CoreHdr, VmInfo): Rename union member new to
        new_dump.
        (read_hdr, rs6000coff_core_p)
        (rs6000coff_core_file_matches_executable_p)
        (rs6000coff_core_file_failing_command)
        (rs6000coff_core_file_failing_signal): Updated function to use new
        union member name.
        * bfd/som.c (som_make_empty_symbol): Rename variable new to
        new_symbol_type.
        * bfd/syms.c (_bfd_generic_make_empty_symbol): Rename variable new
        to new_symbol.
        * bfd/tekhex.c (first_phase, tekhex_make_empty_symbol): Rename
        variable new to new_symbol.
        * binutils/nlmconv.c (main): Rename variable new to new_name.
        * gas/config/tc-arm.c (insert_reg_alias): Rename variable new to
        new_reg.
        * gas/config/tc-dlx.c (parse_operand): Rename variable new to
        new_pos.
        * gas/config/tc-ia64.c (ia64_gen_real_reloc_type): Rename variable
        new to newr.
        * gas/config/tc-mcore.c (parse_exp, parse_imm): Rename variable
        new to new_pointer.
        * gas/config/tc-microblaze.c (parse_exp, parse_imm, check_got):
        Change name from new to new_pointer.
        * gas/config/tc-or32.c (parse_operand): Rename variable new to
        new_pointer.
        * gas/config/tc-pdp11.c (md_assemble): Rename variable new to
        new_pointer.
        * gas/config/tc-pj.c (alias): Change argument new to new_name.
        * gas/config/tc-score.c (s3_build_score_ops_hsh): Rename variable
        new to new_opcode. (s3_build_dependency_insn_hsh) Rename variable
        new to new_i2n. (s3_convert): Rename variables old and new to
        r_old and r_new.
        * gas/config/tc-score7.c (s7_build_score_ops_hsh): Rename variable
        new to new_opcode. (s7_build_dependency_insn_hsh): Rename variable
        new to new_i2d. (s7_b32_relax_to_b16, s7_convert_frag): Rename
        variables old and new to r_old and r_new.
        * gas/config/tc-sh.c (parse_exp): Rename variable new to
        new_pointer.
        * gas/config/tc-sh64.c (shmedia_parse_exp): Rename variable new to
        new_pointer.
        * gas/config/tc-tic4x.c (tic4x_operand_parse): Rename variable new
        to new_pointer.
        * gas/config/tc-z8k.c (parse_exp): Rename variable new to
        new_pointer.
        * gas/listing.c (listing_newline): Rename variable new to new_i.
        * ld/ldexp.c (exp_intop, exp_bigintop, exp_relop, exp_binop)
        (exp_trinop, exp_unop, exp_nameop, exp_assop): Rename variable new
        to new_e.
        * ld/ldfile.c (ldfile_add_library_path): Rename variable new to
        new_dirs. (ldfile_add_arch): Rename variable new to new_arch.
        * ld/ldlang.c (new_statement, lang_final, lang_add_wild)
        (lang_target, lang_add_fill, lang_add_data, lang_add_assignment)
        (lang_add_insert): Rename variable new to new_stmt. (new_afile):
        Added missing cast. (lang_memory_region_lookup): Rename variable
        new to new_region. (init_os): Rename variable new to
        new_userdata. (lang_add_section): Rename variable new to
        new_section. (ldlang_add_undef): Rename variable new to
        new_undef. (realsymbol): Rename variable new to new_name.
        * opcodes/z8kgen.c (internal, gas): Rename variable new to new_op.

        Updated sources to avoid using the identifier name "template",
        which is a keyword in c++.

        * bfd/elf32-arm.c (struct stub_def): Rename member template to
        template_sequence. (arm_build_one_stub,
        find_stub_size_and_template, arm_size_one_stub, arm_map_one_stub):
        Rename variable template to template_sequence.
        * bfd/elfxx-ia64.c (elfNN_ia64_relax_br, elfNN_ia64_relax_brl):
        Rename variable template to template_val.
        * gas/config/tc-arm.c (struct asm_cond, struct asm_psr, struct
        asm_barrier_opt): Change member template to
        template_name. (md_begin): Update code to reflect new member
        names.
        * gas/config/tc-i386.c (struct templates, struct _i386_insn)
        (match_template, cpu_flags_match, match_reg_size, match_mem_size)
        (operand_size_match, md_begin, i386_print_statistics, pi)
        (build_vex_prefix, md_assemble, parse_insn, optimize_imm)
        (optimize_disp): Updated code to use new names. (parse_insn):
        Added casts.
        * gas/config/tc-ia64.c (dot_template, emit_one_bundle): Updated
        code to use new names.
        * gas/config/tc-score.c (struct s3_asm_opcode): Renamed member
        template to template_name. (s3_parse_16_32_inst, s3_parse_48_inst,
        s3_do_macro_ldst_label, s3_build_score_ops_hsh): Update code to
        use new names.
        * gas/config/tc-score7.c (struct s7_asm_opcode): Renamed member
        template to template_name. (s7_parse_16_32_inst,
        s7_do_macro_ldst_label, s7_build_score_ops_hsh): Update code to
        use new names.
        * gas/config/tc-tic30.c (md_begin, struct tic30_insn)
        (md_assemble): Update code to use new names.
        * gas/config/tc-tic54x.c (struct _tic54x_insn, md_begin)
        (optimize_insn, tic54x_parse_insn, next_line_shows_parallel):
        Update code to use new names.
        * include/opcode/tic30.h (template): Rename type template to
        insn_template. Updated code to use new name.
        * include/opcode/tic54x.h (template): Rename type template to
        insn_template.
        * opcodes/cris-dis.c (bytes_to_skip): Update code to use new name.
        * opcodes/i386-dis.c (putop): Update code to use new name.
        * opcodes/i386-gen.c (process_i386_opcodes): Update code to use
        new name.
        * opcodes/i386-opc.h (struct template): Rename struct template to
        insn_template. Update code accordingly.
        * opcodes/i386-tbl.h (i386_optab): Update type to use new name.
        * opcodes/ia64-dis.c (print_insn_ia64): Rename variable template
        to template_val.
        * opcodes/tic30-dis.c (struct instruction, get_tic30_instruction):
        Update code to use new name.
        * opcodes/tic54x-dis.c (has_lkaddr, get_insn_size)
        (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
        Update code to use new name.
        * opcodes/tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
        Update type to new name.
2009-08-29 22:11:00 +00:00
Nick Hudson 5d38c0d906 hppa.h (pa_opcodes): Add a pa10 bb without FLAG_STRICT. 2009-08-20 20:31:27 +00:00
Anthony Green 297abffd67 Add PC-relative branch instructions to moxie port. 2009-06-11 11:27:57 +00:00
Anthony Green c05f7ba26e Print moxie addresses nicely. 2009-06-06 13:02:21 +00:00
Nick Clifton cc0748930b Add new binutils target: moxie 2009-04-16 15:39:46 +00:00
DJ Delorie 93c75f41e4 [bfd]
* elf32-h8300.c (elf32_h8_relax_section): Relax MOVA opcodes.
[gas]
	* tc-h8300.c (do_a_fix_imm): Pass the insn, force relocs for MOVA
	immediates.
	(build_bytes): Pass insn to do_a_fix_imm.
[include/opcode]
	* h8300.h: Add relaxation attributes to MOVA opcodes.
2009-04-07 18:21:21 +00:00
Alan Modra 926aac359f include/opcode/
* ppc.h (ppc_parse_cpu): Declare.
opcodes/
	* ppc-dis.c: Include "opintl.h".
	(struct ppc_mopt, ppc_opts): New.
	(ppc_parse_cpu): New function.
	(powerpc_init_dialect): Use it.
	(print_ppc_disassembler_options): Dump options from ppc_opts.
	Internationalize message.
gas/
	* config/tc-ppc.c (parse_cpu): Delete.
	(md_parse_option, ppc_machine): Use ppc_parse_cpu.
gas/testsuite/
	* gas/ppc/altivec_and_spe.d (objdump): Add -Maltivec.
	* gas/ppc/common.d: Adjust for -Mcom not including -Mppc.
2009-03-10 06:53:45 +00:00
Nick Clifton 753a03bf8e Add support for Score7 architecture. 2009-03-02 10:33:07 +00:00
Peter Bergner c636f27d48 gas/
* config/tc-ppc.c (pre_defined_registers): Add "f32" to "f63",
	"f.32" to "f.63", "vs0" to "vs63" and "vs.0" to "vs.63".
	(parse_cpu): Extend -mpower7 to accept power7 and isel instructions.

gas/testsuite/
	* gas/ppc/e500mc.d ("wait", "waitsrv", "waitimpl"): Add tests.
	* gas/ppc/e500mc.s: Likewise.
	* gas/ppc/power6.d ("cdtbcd", "cbcdtd", "addg6s"): Add tests.
	* gas/ppc/power6.s: Likewise.
	* gas/ppc/power7.d ("lfdpx", "mffgpr", "mftgpr"): Remove invalid tests.
	("wait", "waitsrv", "waitimpl", "divwe", "divwe.", "divweo", "divweo.",
	"divweu", "divweu.", "divweuo", "divweuo.", "bpermd", "popcntw",
	"popcntd", "ldbrx", "stdbrx", "lfiwzx", "lfiwzx", "fcfids", "fcfids.",
	"fcfidus", "fcfidus.", "fctiwu", "fctiwu.", "fctiwuz", "fctiwuz.",
	"fctidu", "fctidu.", "fctiduz", "fctiduz.", "fcfidu", "fcfidu.",
	"ftdiv", "ftdiv", "ftsqrt", "ftsqrt", "dcbtt", "dcbtstt", "dcffix",
	"dcffix.", "lbarx", "lbarx", "lbarx", "lharx", "lharx", "lharx",
	"stbcx.", "sthcx.", "fre", "fre.", "fres", "fres.", "frsqrte",
	"frsqrte.", "frsqrtes", "frsqrtes.", "isel"): Add tests.
	* gas/ppc/power7.s: Likewise.
	* gas/ppc/vsx.d: New test.
	* gas/ppc/vsx.s: Likewise.
	* gas/ppc/ppc.exp: Run it.

include/opcode/
	* ppc.h (PPC_OPCODE_POWER7): New.

opcodes/
	* ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
	the power7 and the isel instructions.
	* ppc-opc.c (insert_xc6, extract_xc6): New static functions.
	(insert_dm, extract_dm): Likewise.
	(XB6): Update comment to include XX2 form.
	(WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
	XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
	(RemoveXX3DM): Delete.
	(powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
	"mftgpr">: Deprecate for POWER7.
	<"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
	"frsqrte.">: Deprecate the three operand form and enable the two
	operand form for POWER7 and later.
	<"wait">: Extend to accept optional parameter.  Enable for POWER7.
	<"waitsrv", "waitimpl">: Add extended opcodes.
	<"ldbrx", "stdbrx">: Enable for POWER7.
	<"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
	<"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
	"divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
	"divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
	"divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
	"fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
	"fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
	"lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
	<"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
	"stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
	"xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
	"xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
	"xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
	"xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
	"xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
	"xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
	"xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
	"xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
	"xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
	"xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
	"xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
	"xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
	"xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
	"xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
	"xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
	"xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
	"xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
	"xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
	"xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
	"xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
	"xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
	"xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
	"xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
	"xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
	"xxspltw", "xxswapd">: Add VSX opcodes.
2009-02-26 22:07:33 +00:00
Doug Evans eea6c2c9c3 * i386.h: Add comment regarding sse* insns and prefixes. 2009-02-06 23:14:34 +00:00
Joseph Myers 0462e8847a bfd:
2009-02-03  Sandip Matte  <sandip@rmicorp.com>

	* aoutx.h (NAME (aout, machine_type)): Handle bfd_mach_mips_xlr.
	* archures.c (bfd_mach_mips_xlr): Define.
	* bfd-in2.h: Regenerate.
	* cpu-mips.c (I_xlr): Define.
	(arch_info_struct): Add XLR entry.
	* elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_XLR.
	(mips_set_isa_flags): Handle bfd_mach_mips_xlr
	(mips_mach_extensions): Add XLR entry.

binutils:
2009-02-03  Sandip Matte  <sandip@rmicorp.com>

	* readelf.c (get_machine_flags): Handle E_MIPS_MACH_XLR.

gas:
2009-02-03  Sandip Matte  <sandip@rmicorp.com>

	* config/tc-mips.c (macro): Handle M_MSGSND, M_MSGLD, M_MSGLD_T,
	M_MSGWAIT and M_MSGWAIT_T.
	(mips_cpu_info_table): Add XLR entry.
	* doc/c-mips.texi (-march): Document xlr.

gas/testsuite:
2009-02-03  Sandip Matte  <sandip@rmicorp.com>

	* gas/mips/mips.exp (xlr): New architecture.
	(xlr-ext): Run test.
	* gas/mips/xlr-ext.d, gas/mips/xlr-ext.s: New.

include/elf:
2009-02-03  Sandip Matte  <sandip@rmicorp.com>

	* mips.h (E_MIPS_MACH_XLR): Define.

include/opcode:
2009-02-03  Sandip Matte  <sandip@rmicorp.com>

	* mips.h (INSN_XLR): Define.
	(INSN_CHIP_MASK): Update.
	(CPU_XLR): Define.
	(OPCODE_IS_MEMBER): Update.
	(M_MSGSND, M_MSGLD, M_MSGLD_T, M_MSGWAIT, M_MSGWAIT_T): Define.

opcodes:
2009-02-03  Sandip Matte  <sandip@rmicorp.com>

	* mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
	(mips_arch_choices): Add XLR entry.
	* mips-opc.c (XLR): Define.
	(mips_builtin_opcodes): Add XLR instructions.
2009-02-03 18:16:04 +00:00
Doug Evans 9c87160882 fix typo in previous entry 2009-01-29 00:37:12 +00:00
Doug Evans 88db8cbb6a * opcode/i386.h: Add multiple inclusion protection.
(EAX_REG_NUM,ECX_REG_NUM,EDX_REGNUM,EBX_REG_NUM,ESI_REG_NUM)
	(EDI_REG_NUM): New macros.
	(MODRM_MOD_FIELD,MODRM_REG_FIELD,MODRM_RM_FIELD): New macros.
	(SIB_SCALE_FIELD,SIB_INDEX_FIELD,SIB_BASE_FIELD): New macros.
	(REG_PREFIX_P): New macro.

	* amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
	(amd64_displaced_step_fixup): Declare.
	* amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
	(amd64_arch_regmap): Move out of amd64_analyze_stack_align
	and make static global.
	(amd64_arch_regmap_len): New static global.
	(amd64_arch_reg_to_regnum): New function.
	(struct amd64_insn): New struct.
	(struct displaced_step_closure): New struct.
	(onebyte_has_modrm,twobyte_has_modrm): New static globals.
	(rex_prefix_p,skip_prefixes)
	(amd64_insn_length_fprintf,amd64_insn_length_init_dis)
	(amd64_insn_length,amd64_get_unused_input_int_reg)
	(amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
	(amd64_displaced_step_copy_insn)
	(amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
	(amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
	(amd64_displaced_step_fixup): New functions.
	* amd64-linux-tdep.c: #include arch-utils.h.
	(amd64_linux_init_abi): Install displaced stepping support.

	* gdb.arch/amd64-disp-step.S: New file.
	* gdb.arch/amd64-disp-step.exp: New file.
	* gdb.arch/i386-disp-step.S: New file.
	* gdb.arch/i386-disp-step.exp: New file.
2009-01-29 00:29:53 +00:00
Peter Bergner 91d9410bd0 gas/
* config/tc-ppc.c (ppc_setup_opcodes): Remove PPC_OPCODE_NOPOWER4 test.
	Test the new "deprecated" opcode field.

include/opcode/
	* ppc.h (struct powerpc_opcode): New field "deprecated".
	(PPC_OPCODE_NOPOWER4): Delete.

opcodes/
	* ppc-opc.c (PPCNONE): Define.
	(NOPOWER4): Delete.
	(powerpc_opcodes): Initialize the new "deprecated" field.
2009-01-09 18:50:57 +00:00
Thiemo Seufer 6e40cdfc86 * aoutx.h (NAME): Add case statements for bfd_mach_mips14000,
bfd_mach_mips16000.
	* archures.c (bfd_architecture): Add .#defines for bfd_mach_mips14000,
	bfd_mach_mips16000.
	* bfd-in2.h: Regenerate.
	* cpu-mips.c: Add enums I_mips14000, I_mips16000.
	(arch_info_struct): Add refs to R14000, R16000.
	* elfxx-mips.c (mips_set_isa_flags): Handle bfd_mach_mips14000,
	bfd_mach_mips16000.
	(mips_mach_extensions): Map R14000, R16000 to R10000.

	* config/tc-mips.c (hilo_interlocks): Handle CPU_R14000, CPU_R16000.
	(mips_cpu_info_table): Add r14000, r16000.
	* doc/c-mips.texi: Add entries for 14000, 16000.

	* mips-dis.c (mips_arch_choices): Add r14000, r16000.

	* mips.h: Define CPU_R14000, CPU_R16000.
        (OPCODE_IS_MEMBER): Include R14000, R16000 in test.
2008-11-28 18:02:17 +00:00
Catherine Moore b1230ddef7 Add support for ARM half-precision conversion instructions. 2008-11-18 15:45:05 +00:00
Chao-ying Fu 5dd0d5828f 2008-11-06 Chao-ying Fu <fu@mips.com>
* mips.h: Doucument '1' for 5-bit sync type.
2008-11-06 19:32:42 +00:00
H.J. Lu ecaf487248 gas/
2008-08-28  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-ia64.c (CR_IIB0): New.
	(CR_IIB1): Likewise.
	(cr): Add cr.iib0 and cr.iib1.
	(specify_resource): Handle IA64_RS_CR_IIB and CR_IIB0/CR_IIB1.

gas/testsuite/

2008-08-28  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/ia64/dv-raw-err.s: Add tests for cr.iib0 and cr.iib1.
	* gas/ia64/dv-waw-err.s: Likewise.
	* gas/ia64/regs.s: Likewise.

	* gas/ia64/dv-raw-err.l: Updated.
	* gas/ia64/dv-waw-err.l: Likewise.
	* gas/ia64/regs.d: Likewise.

include/opcode/

2008-08-28  H.J. Lu  <hongjiu.lu@intel.com>

	* ia64.h (ia64_resource_specifier): Add IA64_RS_CR_IIB.  Update
	IA64_RS_CR.

opcodes/

2008-08-28  H.J. Lu  <hongjiu.lu@intel.com>

	* ia64-dis.c (print_insn_ia64): Handle cr.iib0 and cr.iib1.
	* ia64-gen.c (lookup_specifier): Likewise.

	* ia64-ic.tbl: Add support for cr.iib0 and cr.iib1.
	* ia64-raw.tbl: Likewise.
	* ia64-waw.tbl: Likewise.
	* ia64-asmtab.c: Regenerated.
2008-08-28 14:07:48 +00:00
Eric Weddington a15b3bdef7 Add AVR architectures avr25, avr31, avr35, and avr51 to match GCC.
bfd/
	* archures.c (bfd_mach_avr25, bfd_mach_avr31, bfd_mach_avr35,
	bfd_mach_avr51): New.
	* bfd-in2.h: Regenerate.
	* cpu-avr.c (arch_info_struct): Add avr25, avr31, avr35, and avr51
	architectures. Change comments to match architecture comments in GCC.
	(compatible): Add test for new AVR architectures.
	* elf32-avr.c (bfd_elf_avr_final_write_processing): Recognize
	bfd_mach_avr25, bfd_mach_avr31, bfd_mach_avr35 and bfd_mach_avr51.
	(elf32_avr_object_p): Recognize E_AVR_MACH_AVR25, E_AVR_MACH_AVR31,
	E_AVR_MACH_AVR35 and E_AVR_MACH_AVR51.

gas/
	* config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51
	architectures. Reorganize list to put mcu types in correct architectures
	and to order list same as in GCC. Use new ISA definitions in
	include/opcode/avr.h.
	* doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture
	descriptions. Reorganize descriptions to put mcu types in correct
	architectures and to order lists same as in GCC.

include/
	* elf/avr.h (E_AVR_MACH_AVR25, E_AVR_MACH_AVR31,
	E_AVR_MACH_AVR35, E_AVR_MACH_AVR51): Define.
	(EF_AVR_MACH): Redefine to 0x7F.
	* opcode/avr.h (AVR_ISA_TINY3, AVR_ISA_ALL, AVR_ISA_USB162): Remove.
	(AVR_ISA_AVR3): Redefine.
	(AVR_ISA_AVR1, AVR_ISA_AVR2, AVR_ISA_AVR31, AVR_ISA_AVR35,
	AVR_ISA_AVR3_ALL, AVR_ISA_AVR4, AVR_ISA_AVR5, AVR_ISA_AVR51,
	AVR_ISA_AVR6): Define.

ld/
	* Makefile.am (ALL_EMULATIONS): Add eavr25.o, eavr31.o, eavr35.o,
	and eavr51.o.
	Add rules for eavr25.c, eavr31.c, eavr35.c, eavr51.c.
	* Makefile.in: Regenerate.
	* configure.tgt (avr-*-*, targ_extra_emuls): Add avr25, avr31, avr35
	and avr51.
	* emulparams/avr25.sh: New file.
	* emulparams/avr31.sh: New file.
	* emulparams/avr35.sh: New file.
	* emulparams/avr51.sh: New file.
2008-08-09 05:35:13 +00:00
Peter Bergner b5bffab8d3 gas/
* config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
	Handle -mvsx and -mpower7.
	(md_show_usage): Document -mpower7 and -mvsx.
	* doc/as.texinfo (Target PowerPC): Document -mvsx.
	* doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.

gas/testsuite/
	* gas/ppc/power7.d: New.
	* gas/ppc/power7.s: Likewise.
	* gas/ppc/ppc.exp: Run power7 test.

include/opcode/
	* ppc.h (PPC_OPCODE_VSX, PPC_OPERAND_VSR): New.

opcodes/
	* ppc-dis.c (powerpc_init_dialect): Handle power7 and vsx options.
	(print_insn_powerpc): Prepend 'vs' when printing VSX registers.
	(print_ppc_disassembler_options): Document -Mpower7 and -Mvsx.
	* ppc-opc.c (insert_xt6): New static function.
	(extract_xt6): Likewise.
	(insert_xa6): Likewise.
	(extract_xa6: Likewise.
	(insert_xb6): Likewise.
	(extract_xb6): Likewise.
	(insert_xb6s): Likewise.
	(extract_xb6s): Likewise.
	(XS6, XT6, XA6, XB6, XB6S, DM, XX3, XX3DM, XX1_MASK, XX3_MASK,
	XX3DM_MASK, PPCVSX): New.
	(powerpc_opcodes): Add opcodes "lxvd2x", "lxvd2ux", "stxvd2x",
	"stxvd2ux", "xxmrghd", "xxmrgld", "xxpermdi", "xvmovdp", "xvcpsgndp".
2008-08-02 04:38:51 +00:00
Alan Modra 79ea8bbb10 include/opcode/
* ppc.h (PPC_OPCODE_405): Define.
	(PPC_OPERAND_FSL, PPC_OPERAND_FCR, PPC_OPERAND_UDI): Define.
gas/
	* config/tc-ppc.c (parse_cpu): Separate handling of -m403/405.
	(md_show_usage): Likewise.
opcodes/
	* ppc-dis.c (print_insn_powerpc): Disassemble FSL/FCR/UDI fields.
	* ppc-opc.c (powerpc_operands): Add Xilinx APU related operands.
	(insert_sprg, PPC405): Use PPC_OPCODE_405.
	(powerpc_opcodes): Add Xilinx APU related opcodes.
2008-07-30 06:29:21 +00:00
Peter Bergner bc089f5083 include/opcode/
* ppc.h (ppc_cpu_t): New typedef.
	(struct powerpc_opcode <flags>): Use it.
	(struct powerpc_operand <insert, extract>): Likewise.
	(struct powerpc_macro <flags>): Likewise.

gas/
	* config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
	(ppc_insert_operand): Likewise.
	(ppc_machine): Likewise.
	* config/tc-ppc.h: #include "opcode/ppc.h"
	(struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
	(ppc_cpu): Update extern decl.

opcodes/
	* ppc-dis.c (print_insn_powerpc): Update prototye to use new
	ppc_cpu_t typedef.
	(struct dis_private): New.
	(POWERPC_DIALECT): New define.
	(powerpc_dialect): Renamed to...
	(powerpc_init_dialect): This.  Update to use ppc_cpu_t and
	struct dis_private.
	(print_insn_big_powerpc): Update for using structure in
	info->private_data.
	(print_insn_little_powerpc): Likewise.
	(operand_value_powerpc): Change type of dialect param to ppc_cpu_t.
	(skip_optional_operands): Likewise.
	(print_insn_powerpc): Likewise.  Remove initialization of dialect.
	* ppc-opc.c (extract_bat, extract_bba, extract_bdm, extract_bdp,
	extract_bo, extract_boe, extract_fxm, extract_mb6, extract_mbe,
	extract_nb, extract_nsi, extract_rbs, extract_sh6, extract_spr,
	extract_sprg, extract_tbr insert_bat, insert_bba, insert_bdm,
	insert_bdp, insert_bo, insert_boe, insert_fxm, insert_mb6, insert_mbe,
	insert_nsi, insert_ral, insert_ram, insert_raq, insert_ras, insert_rbs,
	insert_sh6, insert_spr, insert_sprg, insert_tbr): Change the dialect
	param to be of type ppc_cpu_t.  Update prototype.
2008-06-13 20:16:00 +00:00
Nick Clifton dc70030aba * mips.h: Document new field descriptors +Q.
(OP_SH_SEQI, OP_MASK_SEQI): New bit mask and shift count for SEQI.

opcodes/

        * mips-dis.c (print_insn_args): Handle field descriptor +Q.
        * mips-opc.c (mips_builtin_opcodes): Add Octeon instructions seq,
        seqi, sne and snei.

gas/

        * config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
        (mips_ip): Likewise.
        (macro_build): Likewise.
        (CPU_HAS_SEQ): New macro.
        (macro2) <M_SEQ_I, M_SNE_I>: Use it.  Emit seq/sne and seqi/snei.

gas/testsuite/

        * gas/mips/octeon.s, gas/mips/octeon.d: Add tests for seq* and sne*.
        * gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: Add tests for seqi
        and snei.
2008-06-12 21:44:53 +00:00
Nick Clifton d73fd47d38 include/opcode/
* mips.h: Document new field descriptors +x, +X, +p, +P, +s, +S.
        Update comment before MIPS16 field descriptors to mention MIPS16.
        (OP_SH_BBITIND, OP_MASK_BBITIND): New bit mask and shift count for
        BBIT.
        (OP_SH_CINSPOS, OP_MASK_CINSPOS, OP_SH_CINSLM1, OP_MASK_CINSLM1):
        New bit masks and shift counts for cins and exts.

gas/

        * config/tc-mips.c (validate_mips_insn): Handle field descriptors
        +x, +X, +p, +P, +s, +S.
        (mips_ip): Likewise.

opcodes/

        * mips-dis.c (print_insn_args): Handle field descriptors +x, +p,
        +s, +S.
        * mips-opc.c (mips_builtin_opcodes): Add Octeon instructions
        baddu, bbit*, cins*, dmul, pop, dpop, exts*, mtm*, mtp*, syncs,
        syncw, syncws, vm3mulu, vm0 and vmulu.

gas/testsuite/

        * gas/mips/octeon.s, gas/mips/octeon.d: Add tests for baddu,
        bbit*, cins*, dmul, pop, dpop, exts*, mtm*, mtp*, syncs, syncw,
        syncws, vm3mulu, vm0 and vmulu.
        * gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: New test.
        * gas/mips/mips.exp: Run it.  Run octeon test with
        run_dump_test_arches.
2008-06-12 16:14:52 +00:00
Adam Nemet b1d07c81ca * mips.h (INSN_MACRO): Move it up to the the pinfo macros.
(INSN2_M_FP_S, INSN2_M_FP_D): New pinfo2 macros.
2008-04-28 16:59:27 +00:00
Nick Clifton 7ed2b9c492 Move entries for changes in sub-directories into the changelogs in those sub-
directories.
2008-04-16 08:33:54 +00:00
Alan Modra 962c961a36 ppc e500mc support 2008-04-14 11:01:38 +00:00
H.J. Lu f47b47fb18 binutils/
2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

	* dwarf.c (dwarf_regnames_i386): Add AVX registers.
	(dwarf_regnames_x86_64): Likewise.

gas/

2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

	* NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx.

	* doc/c-i386.texi: Add avx, aes, clmul and fma to -march=.
	Document -msse2avx, .avx, .aes, .clmul and .fma.

	* config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New.
	(vex_prefix): Likewise.
	(sse2avx): Likewise.
	(CPU_FLAGS_ARCH_MATCH): Likewise.
	(CPU_FLAGS_64BIT_MATCH): Likewise.
	(CPU_FLAGS_32BIT_MATCH): Likewise.
	(CPU_FLAGS_PERFECT_MATCH): Likewise.
	(regymm): Likewise.
	(vex_imm4): Likewise.
	(fits_in_imm4): Likewise.
	(build_vex_prefix): Likewise.
	(VEX_check_operands): Likewise.
	(bad_implicit_operand): Likewise.
	(OPTION_MSSE2AVX): Likewise.
	(T_YMMWORD): Likewise.
	(_i386_insn): Add vex.
	(cpu_arch): Add .avx, .aes, .clmul and .fma.
	(cpu_flags_match): Changed to take a pointer to const template.
	Enable encoding SSE instructions with VEX prefix for -msse2avx.
	(match_mem_size): Also check ymmword.
	(operand_type_match): Clear ymmword.
	(md_begin): Allow '_' in mnemonic.
	(type_names): Add OPERAND_TYPE_VEX_IMM4.
	(process_immext): Update assert.
	(md_assemble): Don't call process_immext if sse2avx and immext
	are true.  Call build_vex_prefix if vex is true.
	(parse_insn): Updated for cpu_flags_match.
	(swap_operands): Handle 5 operands.
	(match_template): Handle 5 operands. Updated for cpu_flags_match.
	Check regymm.  Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX.
	(process_suffix): Handle YMMWORD_MNEM_SUFFIX.
	(check_byte_reg): Check regymm.
	(process_operands): Duplicate the destination register for
	-msse2avx if needed.
	(build_modrm_byte): Updated for instructions with VEX encoding.
	(output_insn): Output VEX prefix if needed.
	(md_longopts): Add msse2avx.
	(md_parse_option): Handle OPTION_MSSE2AVX.
	(md_show_usage): Add avx, aes, clmul, fma and -msse2avx.
	(intel_e09): Support YMMWORD.
	(intel_e11): Likewise.
	(intel_get_token): Likewise.

gas/testsuite/

2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/i386.exp: Run aes, aes-intel, x86-64-aes,
	x86-64-aes-intel, avx, avx-intel, inval-avx, x86-64-avx,
	x86-64-avx-intel and x86-64-inval-avx.

	* gas/cfi/cfi-i386.s: Add tests for AVX register maps.
	* gas/cfi/cfi-x86_64.s: Likewise.

	* gas/i386/aes.d: New.
	* gas/i386/aes.s: Likewise.
	* gas/i386/aes-intel.d: Likewise.
	* gas/i386/avx.d: Likewise.
	* gas/i386/avx.s: Likewise.
	* gas/i386/avx-intel.d: Likewise.
	* gas/i386/clmul.d: Likewise.
	* gas/i386/clmul-intel.d: Likewise.
	* gas/i386/clmul.s: Likewise.
	* gas/i386/i386.exp: Likewise.
	* gas/i386/inval-avx.l: Likewise.
	* gas/i386/inval-avx.s: Likewise.
	* gas/i386/sse2avx.d: Likewise.
	* gas/i386/sse2avx.s: Likewise.
	* gas/i386/x86-64-aes.d: Likewise.
	* gas/i386/x86-64-aes.s: Likewise.
	* gas/i386/x86-64-aes-intel.d: Likewise.
	* gas/i386/x86-64-avx.d: Likewise.
	* gas/i386/x86-64-avx.s: Likewise.
	* gas/i386/x86-64-avx-intel.d: Likewise.
	* gas/i386/x86-64-clmul.d: Likewise.
	* gas/i386/x86-64-clmul-intel.d: Likewise.
	* gas/i386/x86-64-clmul.s: Likewise.
	* gas/i386/x86-64-inval-avx.l: Likewise.
	* gas/i386/x86-64-inval-avx.s: Likewise.
	* gas/i386/x86-64-sse2avx.d: Likewise.
	* gas/i386/x86-64-sse2avx.s: Likewise.

	* gas/i386/arch-10.s: Add tests for AVX, AES, CLMUL and FMA.
	* gas/i386/x86-64-arch-2.s: Likewise.

	* gas/i386/rexw.s: Add AVX tests.

	* gas/i386/x86-64-opcode-inval.s: Remove lds/les test.

	* gas/cfi/cfi-i386.d: Updated.
	* gas/cfi/cfi-x86_64.d: Likewise.
	* gas/i386/arch-10.d:  Likewise.
	* gas/i386/arch-10-1.l: Likewise.
	* gas/i386/arch-10-2.l: Likewise.
	* gas/i386/arch-10-3.l: Likewise.
	* gas/i386/arch-10-4.l: Likewise.
	* gas/i386/rexw.d: Likewise.
	* gas/i386/x86-64-arch-2.d: Likewise.
	* gas/i386/x86-64-opcode-inval.d: Likewise.
	* gas/i386/x86-64-opcode-inval-intel.d: Likewise.

include/opcode/

2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

	* i386.h (MAX_OPERANDS): Set to 5.
	(MAX_MNEM_SIZE): Changed to 20.

opcodes/

2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (OP_E_register): New.
	(OP_E_memory): Likewise.
	(OP_VEX): Likewise.
	(OP_EX_Vex): Likewise.
	(OP_EX_VexW): Likewise.
	(OP_XMM_Vex): Likewise.
	(OP_XMM_VexW): Likewise.
	(OP_REG_VexI4): Likewise.
	(PCLMUL_Fixup): Likewise.
	(VEXI4_Fixup): Likewise.
	(VZERO_Fixup): Likewise.
	(VCMP_Fixup): Likewise.
	(VPERMIL2_Fixup): Likewise.
	(rex_original): Likewise.
	(rex_ignored): Likewise.
	(Mxmm): Likewise.
	(XMM): Likewise.
	(EXxmm): Likewise.
	(EXxmmq): Likewise.
	(EXymmq): Likewise.
	(Vex): Likewise.
	(Vex128): Likewise.
	(Vex256): Likewise.
	(VexI4): Likewise.
	(EXdVex): Likewise.
	(EXqVex): Likewise.
	(EXVexW): Likewise.
	(EXdVexW): Likewise.
	(EXqVexW): Likewise.
	(XMVex): Likewise.
	(XMVexW): Likewise.
	(XMVexI4): Likewise.
	(PCLMUL): Likewise.
	(VZERO): Likewise.
	(VCMP): Likewise.
	(VPERMIL2): Likewise.
	(xmm_mode): Likewise.
	(xmmq_mode): Likewise.
	(ymmq_mode): Likewise.
	(vex_mode): Likewise.
	(vex128_mode): Likewise.
	(vex256_mode): Likewise.
	(USE_VEX_C4_TABLE): Likewise.
	(USE_VEX_C5_TABLE): Likewise.
	(USE_VEX_LEN_TABLE): Likewise.
	(VEX_C4_TABLE): Likewise.
	(VEX_C5_TABLE): Likewise.
	(VEX_LEN_TABLE): Likewise.
	(REG_VEX_XX): Likewise.
	(MOD_VEX_XXX): Likewise.
	(PREFIX_0F38DB..PREFIX_0F38DF): Likewise.
	(PREFIX_0F3A44): Likewise.
	(PREFIX_0F3ADF): Likewise.
	(PREFIX_VEX_XXX): Likewise.
	(VEX_OF): Likewise.
	(VEX_OF38): Likewise.
	(VEX_OF3A): Likewise.
	(VEX_LEN_XXX): Likewise.
	(vex): Likewise.
	(need_vex): Likewise.
	(need_vex_reg): Likewise.
	(vex_i4_done): Likewise.
	(vex_table): Likewise.
	(vex_len_table): Likewise.
	(OP_REG_VexI4): Likewise.
	(vex_cmp_op): Likewise.
	(pclmul_op): Likewise.
	(vpermil2_op): Likewise.
	(m_mode): Updated.
	(es_reg): Likewise.
	(PREFIX_0F38F0): Likewise.
	(PREFIX_0F3A60): Likewise.
	(reg_table): Add REG_VEX_71...REG_VEX_73 and REG_VEX_AE.
	(prefix_table): Add PREFIX_0F38DB..PREFIX_0F38DF, PREFIX_0F3ADF
	and PREFIX_VEX_XXX entries.
	(x86_64_table): Use VEX_C4_TABLE and VEX_C5_TABLE.
	(three_byte_table): Use PREFIX_0F38DB..PREFIX_0F38DF and
	PREFIX_0F3ADF.
	(mod_table): Use VEX_C4_TABLE, VEX_C5_TABLE and VEX_LEN_TABLE.
	Add MOD_VEX_XXX entries.
	(ckprefix): Initialize rex_original and rex_ignored.  Store the
	REX byte in rex_original.
	(get_valid_dis386): Handle the implicit prefix in VEX prefix
	bytes and USE_VEX_LEN_TABLE/USE_VEX_C4_TABLE/USE_VEX_C5_TABLE.
	(print_insn): Set need_vex/need_vex_reg/vex_i4_done to 0 before
	calling get_valid_dis386.  Use rex_original and rex_ignored when
	printing out REX.
	(putop): Handle "XY".
	(intel_operand_size): Handle VEX, xmm_mode, xmmq_mode and
	ymmq_mode.
	(OP_E_extended): Updated to use OP_E_register and
	OP_E_memory.
	(OP_XMM): Handle VEX.
	(OP_EX): Likewise.
	(XMM_Fixup): Likewise.
	(CMP_Fixup): Use ARRAY_SIZE.

	* i386-gen.c (cpu_flag_init): Add CpuAES, CPU_CLMUL_FLAGS,
	CPU_FMA_FLAGS and CPU_AVX_FLAGS.
	(operand_type_init): Add OPERAND_TYPE_REGYMM and
	OPERAND_TYPE_VEX_IMM4.
	(cpu_flags): Add CpuAVX, CpuAES, CpuCLMUL and CpuFMA.
	(opcode_modifiers): Add Implicit1stXmm0, Vex, Vex256, VexNDD,
	VexNDS, VexW0, VexW1, Vex0F, Vex0F38, Vex0F3A, Vex3Sources,
	VexImmExt and SSE2AVX.
	(operand_types): Add RegYMM, Ymmword and Vex_Imm4.

	* i386-opc.h (CpuAVX): New.
	(CpuAES): Likewise.
	(CpuCLMUL): Likewise.
	(CpuFMA): Likewise.
	(Vex): Likewise.
	(Vex256): Likewise.
	(VexNDS): Likewise.
	(VexNDD): Likewise.
	(VexW0): Likewise.
	(VexW1): Likewise.
	(Vex0F): Likewise.
	(Vex0F38): Likewise.
	(Vex0F3A): Likewise.
	(Vex3Sources): Likewise.
	(VexImmExt): Likewise.
	(SSE2AVX): Likewise.
	(RegYMM): Likewise.
	(Ymmword): Likewise.
	(Vex_Imm4): Likewise.
	(Implicit1stXmm0): Likewise.
	(CpuXsave): Updated.
	(CpuLM): Likewise.
	(ByteOkIntel): Likewise.
	(OldGcc): Likewise.
	(Control): Likewise.
	(Unspecified): Likewise.
	(OTMax): Likewise.
	(i386_cpu_flags): Add cpuavx, cpuaes, cpuclmul and cpufma.
	(i386_opcode_modifier): Add implicit1stxmm0, vex, vex256,
	vexnds, vexndd, vexw0, vexw1, vex0f, vex0f38, vex0f3a,
	vex3sources, veximmext and sse2avx.
	(i386_operand_type): Add regymm, ymmword and vex_imm4.

	* i386-opc.tbl: Add AES, CLMUL, AVX and FMA new instructions.

	* i386-reg.tbl: Add AVX registers, ymm0..ymm15.

	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.
2008-04-03 14:03:20 +00:00
Eric Weddington 07e2a8f376 /gas:
2008-03-28  Eric B. Weddington  <eric.weddington@atmel.com>

	* config/tc-avr.c (mcu_types): Add attiny167.
	* doc/c-avr.texi: Likewise.

/include:
2008-03-28  Eric B. Weddington  <eric.weddington@atmel.com>

	* opcode/avr.h (AVR_ISA_TINY3): Define new opcode set for attiny167.
2008-03-28 21:51:38 +00:00
Andreas Krebbel 197dffcbd6 2008-03-19 Andreas Krebbel <krebbel1@de.ibm.com>
* opcodes/s390-mkopc.c (s390_opcode_cpu_val): S390_OPCODE_Z10 added.
	(s390_cond_extensions): Reduced extensions to the compare related.
	(main): z10 cpu type option added.
	(expandConditionalJump): Renamed to ...
	(insertExpandedMnemonic): ... this.

	* opcodes/s390-opc.c: Re-group the operand format makros.
	(INSTR_RIE_RRPU, INSTR_RIE_RRP0, INSTR_RIE_RUPI,
	INSTR_RIE_R0PI, INSTR_RIE_RUPU, INSTR_RIE_R0PU, INSTR_RIE_R0IU,
	INSTR_RIE_R0I0, INSTR_RIE_R0UU, INSTR_RIE_R0U0,
	INSTR_RIE_RRUUU, INSTR_RIS_RURDI, INSTR_RIS_R0RDI, INSTR_RIS_RURDU,
	INSTR_RIS_R0RDU, INSTR_RRF_U0RR, INSTR_RRF_00RR, INSTR_RRS_RRRDU,
	INSTR_RRS_RRRD0, INSTR_RXY_URRD, INSTR_SIY_IRD, INSTR_SIL_RDI,
	INSTR_SIL_RDU): New instruction formats added.
	(MASK_RIE_RRPU, MASK_RIE_RRP0, MASK_RIE_RUPI, MASK_RIE_R0PI,
	MASK_RIE_RUPU, MASK_RIE_R0PU, MASK_RIE_R0IU, MASK_RIE_R0I0,
	MASK_RIE_R0UU, MASK_RIE_R0U0, MASK_RIE_RRUUU, MASK_RIS_RURDI,
	MASK_RIS_R0RDI, MASK_RIS_RURDU, MASK_RIS_R0RDU, MASK_RRF_U0RR,
	MASK_RRF_00RR, MASK_RRS_RRRDU, MASK_RRS_RRRD0, MASK_RXY_URRD,
	MASK_SIY_IRD, MASK_SIL_RDI, MASK_SIL_RDU): New instruction format
	masks added.
	(s390_opformats): New formats added "ris", "rrs", "sil".
	* opcodes/s390-opc.txt: Add the conditional jumps with the
	extensions removed from automatic expansion in s390-mkopc.c manually.
	(asi - trtre): Add new System z10 EC instructions.
	* include/opcode/s390.h (s390_opcode_cpu_val): S390_OPCODE_Z10 added.

2008-03-19  Andreas Krebbel  <krebbel1@de.ibm.com>

	* config/tc-s390.c (md_parse_option): z10 option added.

2008-03-19  Andreas Krebbel  <krebbel1@de.ibm.com>

	* gas/s390/zarch-z10.d: New file.
	* gas/s390/zarch-z10.s: New file.
	* gas/s390/s390.exp: Run the z10 testcases.
2008-03-19 10:29:18 +00:00
Paul Brook 3461c83a05 2008-03-09 Paul Brook <paul@codesourcery.com>
bfd/
	* elf32-arm.c (elf32_arm_merge_eabi_attributes): Handle new
	Tag_VFP_arch values.

	binutils/
	* readelf.c (arm_attr_tag_VFP_arch): Add "VFPv3-D16".

	gas/
	* config/tc-arm.c (fpu_vfp_ext_d32): New vairable.
	(parse_vfp_reg_list, encode_arm_vfp_reg): Use it.
	(arm_option_cpu_value): Add vfpv3-d16, vfpv2 and vfpv3.
	(aeabi_set_public_attributes): Handle Tag_VFP_arch=VFPV3-D16.
	* doc/c-arm.texi: Document new ARM FPU variants.

	gas/testsuite/
	* gas/arm/vfpv3-d16-bad.d: New test.
	* gas/arm/vfpv3-d16-bad.l: New test.

	include/opcode/
	* arm.h (FPU_VFP_EXT_D32, FPU_VFP_V3D16, FPU_ARCH_VFP_V3D16): Define.
2008-03-09 13:23:29 +00:00
Paul Brook e3bf57046b 2008-03-04 Paul Brook <paul@codesourcery.com>
gas/
	* config/tc-arm.c (arm_ext_barrier, arm_ext_msr): New.
	(arm_ext_v7m): Rename...
	(arm_ext_m): ... to this.  Include v6-M.
	(do_t_add_sub): Allow narrow low-reg non flag setting adds.
	(do_t_mrs, do_t_msr, aeabi_set_public_attributes): Use arm_ext_m.
	(md_assemble): Allow wide msr instructions.
	(insns): Add classifications for v6-m instructions.
	(arm_cpu_option_table): Add cortex-m1.
	(arm_arch_option_table): Add armv6-m.
	(cpu_arch): Add ARM_ARCH_V6M.  Fix numbering of other v6 variants.

	gas/testsuite/
	* gas/arm/archv6m.d: New test.
	* gas/arm/archv6m.s: New test.
	* gas/arm/t16-bad.s: Test low register non flag setting add.
	* gas/arm/t16-bad.l: Update expected output.

	include/opcode/
	* arm.h (ARM_EXT_V6M, ARM_EXT_BARRIER, ARM_EXT_THUMB_MSR): Define.
	(ARM_AEXT_V6T2, ARM_AEXT_V7_ARM, ARM_AEXT_V7M): Use new flags.
	(ARM_AEXT_V6M, ARM_ARCH_V6M): Define.
2008-03-05 01:31:26 +00:00
Nick Clifton fb91cb7a41 Change accreditation for patch for PR3134 2008-02-29 14:43:17 +00:00
Nick Clifton ca504a0dee PR 3134
* h8300.h (h8_opcodes): Add an encoding for a mov.l instruction
   with a 32-bit displacement but without the top bit of the 4th byte
   set.

   * gas/h8300/pr3134.s: New test.
   * gas/h8300/pr3134.d: Expected disassembly
   * gas/h8300/h8300.exp: Run the new test.

   * gas/h8300/h8300-coff.exp: Fix test for COFF based ports to
   accept h8300-rtemscoff not just h8300-rtems.
2008-02-27 12:33:42 +00:00
Nick Clifton 344f17f1fa * cr16.h (cr16_num_optab): Declared.
* cr16-opc.c  (cr16_num_optab): Defined
2008-02-18 13:46:45 +00:00
Nick Clifton f16db7f54e PR gas/2626
* avr.h (AVR_ISA_2xxe): Define.

        * config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26
        to AVR_ISA_2xxe.
        (avr_operand): Disallow post-increment addressing in the lpm
        instruction for the attiny26.
2008-02-14 13:04:29 +00:00
Adam Nemet 58d470721b * mips.h: Update copyright.
(INSN_CHIP_MASK): New macro.
	(INSN_OCTEON): New macro.
	(CPU_OCTEON): New macro.
	(OPCODE_IS_MEMBER): Handle Octeon instructions.
2008-02-04 19:25:05 +00:00
Eric Weddington 4be948a34a /gas:
2008-01-23  Eric B. Weddington  <eric.weddington@atmel.com>

	* config/tc-avr.c (mcu_types): Change opcode set for at86rf401.

/include:
2008-01-23  Eric B. Weddington  <eric.weddington@atmel.com>

	* opcode/avr.h (AVR_ISA_RF401): Add new opcode set for at86rf401.
2008-01-23 17:36:23 +00:00
Eric Weddington c7b8bedfb2 /gas:
2008-01-03  Eric B. Weddington  <eric.weddington@atmel.com>

	* config/tc-avr.c (mcu_types): Change opcode set for avr3,
	at90usb82, at90usb162.
	* doc/c-avr.texi: Change architecture grouping for at90usb82,
	at90usb162.
	These changes support the new avr35 architecture group in gcc.

/include:
2008-01-03  Eric B. Weddington  <eric.weddington@atmel.com>

	* opcode/avr.h (AVR_ISA_USB162): Add new opcode set.
	(AVR_ISA_AVR3): Likewise.
2008-01-16 17:59:07 +00:00
Mark Shinwell 47c9864a0a bfd/
* archures.c (bfd_mach_mips_loongson_2e): New.
	(bfd_mach_mips_loongson_2f): New.
	* bfd-in2.h (bfd_mach_mips_loongson_2e): New.
	(bfd_mach_mips_loongson_2f): New.
	* cpu-mips.c: Add I_loongson_2e and I_loongson_2f to
	anonymous enum.
	(arch_info_struct): Add Loongson-2E and Loongson-2F entries.
	* elfxx-mips.c (_bfd_elf_mips_mach): Handle Loongson-2E
	and Loongson-2F flags.
	(mips_set_isa_flags): Likewise.
	(mips_mach_extensions): Add Loongson-2E and Loongson-2F
	entries.

	binutils/
	* readelf.c (get_machine_flags): Handle Loongson-2E and -2F
	flags.

	gas/
	* config/tc-mips.c (mips_cpu_info_table): Add loongson2e
	and loongson2f entries.
	* doc/c-mips.texi: Document -march=loongson{2e,2f} options.

	gas/testsuite/
	* gas/mips/mips.exp: Add loongson-2e and -2f tests.
	* gas/mips/loongson-2e.d: New.
	* gas/mips/loongson-2e.s: New.
	* gas/mips/loongson-2f.d: New.
	* gas/mips/loongson-2f.s: New.

	include/elf/
	* mips.h (E_MIPS_MACH_LS2E): New.
	(E_MIPS_MACH_LS2F): New.

	include/opcode/
	* mips.h (INSN_LOONGSON_2E): New.
	(INSN_LOONGSON_2F): New.
	(CPU_LOONGSON_2E): New.
	(CPU_LOONGSON_2F): New.
	(OPCODE_IS_MEMBER): Update for Loongson-2E and -2F flags.

	opcodes/
	* mips-dis.c (mips_arch_choices): Add Loongson-2E and -2F
	entries.
	* mips-opc.c (IL2E): New.
	(IL2F): New.
	(mips_builtin_opcodes): Add Loongson-2E and -2F instructions.
	Allow movz and movn for Loongson-2E and -2F.  Add movnz entry.
	Move coprocessor encodings to the end of the table.  Allow
	certain MIPS V .ps instructions on the Loongson-2E and -2F.
2007-11-29 12:23:44 +00:00
Mark Shinwell 35e137475d include/opcode/
* mips.h (INSN_ISA*): Redefine certain values as an
	enumeration.  Update comments.
	(mips_isa_table): New.
	(ISA_MIPS*): Redefine to match enumeration.
	(OPCODE_IS_MEMBER): Modify to correctly test new INSN_ISA*
	values.

	opcodes/
	* mips-opc.c (I3_32, I3_33, I4_32, I4_33, I5_33): New.
	(mips_builtin_opcodes): Use these new I* values.
2007-11-29 11:55:19 +00:00
Ben Elliston 4b8c903325 binutils/
* doc/binutils.texi (objdump): Document -Mppcps.

gas/
	* config/tc-ppc.c (parse_cpu): Handle "750cl".
	(pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
	(md_show_usage): Document -m750cl.
	(md_assemble): Handle two delimiters in succession (eg. `),').
	* doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
	* testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
	* testsuite/gas/ppc/ppc750ps.s: New file.
	* testsuite/gas/ppc/ppc750ps.d: Likewise.

include/opcode/
	* ppc.h (PPC_OPCODE_PPCPS): New.

opcodes/
	* ppc-opc.c (PSW, PSWM, PSQ, PSQM, PSD, MTMSRD_L): New.
	(XOPS, XOPS_MASK, XW, XW_MASK): Likewise.
	(PPCPS): Likewise.
	(powerpc_opcodes): Add all pair singles instructions.
	* ppc-dis.c (powerpc_dialect): Handle "ppcps".
	(print_ppc_disassembler_options): Document -Mppcps.
2007-08-24 00:56:30 +00:00
H.J. Lu 13c9f5c677 Correct ChangeLog entries. 2007-08-01 15:27:55 +00:00
Nathan Sidwell ee5dec125d gas/testsuite/
* gas/m68k/mcf-coproc.d: New.
	* gas/m68k/mcf-coproc.s: New.
	* gas/m68k/all.exp: Add it.

	gas/
	* config/tc-m68k.c (m68k_ip): Add j & K operand types.
	(install_operand): Add E encoding.
	(md_begin): Check and skip initial '.' arg character.
	(get_num): Add 0..511 case.

	include/
	* opcode/m68k.h: Document j K & E.

	opcodes/
	* m68k-dis.c (fetch_arg): Add E.  Replace length switch with
	direct masking.
	(print_ins_arg): Add j & K operand types.
	(match_insn_m68k): Check and skip initial '.' arg character.
	(m68k_scan_mask): Likewise.
	* m68k-opc.c (m68k_opcodes): Add coprocessor instructions.
2007-07-03 07:54:19 +00:00
Nick Clifton 8931495a14 New port: National Semiconductor's CR16 2007-06-29 14:09:34 +00:00
Alan Modra 211f9f1fce gas/
PR 4448
	* config/tc-ppc.c (ppc_insert_operand): Don't increase min for
	PPC_OPERAND_PLUS1.
include/opcode/
	* ppc.h (PPC_OPERAND_PLUS1): Update comment.
2007-05-02 11:24:17 +00:00
Nathan Sidwell 1974731bb6 gas/testsuite/
* gas/m68k/br-isaa.s: New.
	* gas/m68k/br-isaa.d: New.
	* gas/m68k/br-isab.s: New.
	* gas/m68k/br-isab.d: New.
	* gas/m68k/br-isac.s: New.
	* gas/m68k/br-isac.d: New.
	* gas/m68k/all.exp: Adjust.

	gas/
	* config/tc-m68k.c (mcf54455_ctrl): New.
	(HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
	(m68k_archs): Add isac.
	(m68k_cpus): Add 54455 family.
	(m68k_ip): Split Bg into Bb, Bs, Bg.
	(m68k_elf_final_processing): Add ISA_C.
	* doc/c-m68k.texi (M680x0 Options): Add isac.

	include/opcode/
	* m68k.h (mcfisa_c): New.
	(mcfusp, mcf_mask): Adjust.

	bfd/
	* archures.c (bfd_mach_mcf_isa_c, bfd_mach_mcf_isa_c_mac,
	bfd_mach_mcf_isa_c_emac): New.
	* elf32-m68k.c (ISAC_PLT_ENTRY_SIZE, elf_isac_plt0_entry,
	elf_isac_plt_entry, elf_isac_plt_info): New.
	(elf32_m68k_object_p): Add ISA_C.
	(elf32_m68k_print_private_bfd_data): Print ISA_C.
	(elf32_m68k_get_plt_info): Detect ISA_C.
	* cpu-m68k.c (arch_info): Add ISAC.
	(m68k_arch_features): Likewise,
	(bfd_m68k_compatible): ISAs B & C are not compatible.

	opcodes/
	* m68k-opc.c: Mark mcfisa_c instructions.
2007-04-23 07:51:30 +00:00
Alan Modra d8507ced8b include/opcode/
* ppc.h (struct powerpc_operand): Replace "bits" with "bitm".
	(num_powerpc_operands): Declare.
	(PPC_OPERAND_SIGNED et al): Redefine as hex.
	(PPC_OPERAND_PLUS1): Define.
opcodes/
	* ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
	change.
	* ppc-opc.c (powerpc_operands): Replace bit count with bit mask
	in all entries.  Add PPC_OPERAND_SIGNED to DE entry.  Remove
	references to following deleted functions.
	(insert_bd, extract_bd, insert_dq, extract_dq): Delete.
	(insert_ds, extract_ds, insert_de, extract_de): Delete.
	(insert_des, extract_des, insert_li, extract_li): Delete.
	(insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
	(insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
	(num_powerpc_operands): New constant.
	(XSPRG_MASK): Remove entire SPRG field.
	(powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
gas/
	* messages.c (as_internal_value_out_of_range): Extend to report
	errors for values with invalid low bits set.
	* config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
	fields.  Check that operands and opcode fields are disjoint.
	(ppc_insert_operand): Check operands using mask rather than bit
	count.   Check low bits too.  Handle PPC_OPERAND_PLUS1.  Adjust
	insertion code.
	(md_apply_fix): Adjust for struct powerpc_operand change.
2007-04-20 12:25:12 +00:00
H.J. Lu 832a897240 Fix year. 2007-03-27 22:45:19 +00:00
H.J. Lu 3ce0c60b4c gas/
2003-03-21  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
	and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.

include/opcode/

2003-03-21  H.J. Lu  <hongjiu.lu@intel.com>

	* i386.h (REX_MODE64): Renamed to ...
	(REX_W): This.
	(REX_EXTX): Renamed to ...
	(REX_R): This.
	(REX_EXTY): Renamed to ...
	(REX_X): This.
	(REX_EXTZ): Renamed to ...
	(REX_B): This.

opcodes/

2003-03-21  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (REX_MODE64): Remove definition.
	(REX_EXTX): Likewise.
	(REX_EXTY): Likewise.
	(REX_EXTZ): Likewise.
	(USED_REX): Use REX_OPCODE instead of 0x40.
	Replace REX_MODE64, REX_EXTX, REX_EXTY and REX_EXTZ with REX_W,
	REX_R, REX_X and REX_B respectively.
2007-03-21 21:23:43 +00:00
H.J. Lu e96d068ed3 gas/
2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerated.

	* config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
	"opcode/i386.h".
	(md_begin): Check reg_name != NULL for the last entry in
	i386_regtab.

	* config/tc-i386.h: Move many entries to opcode/i386.h and
	opcodes/i386-opc.h.

	* configure.in (need_opcodes): Set true for i386.
	* configure: Regenerated.

include/opcode/

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

	* i386.h: Add entries from config/tc-i386.h and move tables
	to opcodes/i386-opc.h.

opcodes/

2007-03-15  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.am (CFILES): Add i386-opc.c.
	(ALL_MACHINES): Add i386-opc.lo.
	Run "make dep-am".
	* Makefile.in: Regenerated.

	* configure.in: Add i386-opc.lo for bfd_i386_arch.
	* configure: Regenerated.

	* i386-dis.c: Include "opcode/i386.h".
	(MAXLEN): Renamed to MAX_MNEM_SIZE. Remove definition.
	(FWAIT_OPCODE): Remove definition.
	(UNIXWARE_COMPAT): Renamed to SYSV386_COMPAT. Remove definition.
	(MAX_OPERANDS): Remove definition.

	* i386-opc.c: New file.
	* i386-opc.h: Likewise.
2007-03-15 14:31:24 +00:00
H.J. Lu d7e13a06c2 2007-03-13 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (FloatDR): Removed.
	(i386_optab): Use FloatD and FloatD|FloatR instead of FloatDR.
2007-03-14 03:26:06 +00:00
Martin Schwidefsky 4e747c10dc 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
* opcodes/s390-opc.c (INSTR_RRE_FR, INSTR_RRF_F0FF2, INSTR_RRF_F0FR,
	INSTR_RRF_UUFF, INSTR_RRF_0UFF, INSTR_RRF_FFFU,	INSTR_RRR_F0FF): New
	instruction formats added.
	(MASK_RRE_FR, MASK_RRF_F0FF2, MASK_RRF_F0FR, MASK_RRF_UUFF,
	MASK_RRF_0UFF, MASK_RRF_FFFU, MASK_RRR_F0FF): New instruction format
	masks added.
	* opcodes/s390-opc.txt (lpdfr - tgxt): Decimal floating point
	instructions added.
	* opcodes/s390-mkopc.c (s390_opcode_cpu_val): S390_OPCODE_Z9_EC added.
	(main): z9-ec cpu type option added.
	* include/opcode/s390.h (s390_opcode_cpu_val): S390_OPCODE_Z9_EC added.

2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>

	* config/tc-s390.c (md_parse_option): z9-ec option added.

2007-03-06  Andreas Krebbel  <krebbel1@de.ibm.com>

	* gas/s390/zarch-z9-ec.d: New file.
	* gas/s390/zarch-z9-ec.s: New file.
	* gas/s390/s390.exp: Run the z9-ec testcases.
2007-03-06 13:19:07 +00:00
Alan Modra a49625d566 * spu-insns.h: Add soma double-float insns. 2007-03-01 11:17:41 +00:00
Thiemo Seufer fe32d85c52 [ gas/ChangeLog ]
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
	ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
	(macro_build): Add case '2'.
	(macro): Expand M_BALIGN to nop, packrl.ph or balign.
	(validate_mips_insn): Add support for balign instruction.
	(mips_ip): Handle DSP R2 instructions. Support balign instruction.
	(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
	md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
	command line options.
	(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
	(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
	* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
	.set dspr2, .set nodspr2.

	[ gas/testsuite/ChangeLog ]
	* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
	DSP R2.
	* gas/mips/mips.exp: Run new test.

	[ include/opcode/Changelog ]
	* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
	(INSN_DSPR2): Add flag for DSP R2 instructions.
	(M_BALIGN): New macro.

	[ opcodes/ChangeLog ]
	* mips-dis.c (mips_arch_choices): Add DSP R2 support.
	(print_insn_args): Add support for balign instruction.
	* mips-opc.c (D33): New shortcut for DSP R2 instructions.
	(mips_builtin_opcodes): Add DSP R2 instructions.

	[ sim/mips/ChangeLog ]
	* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
	* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
	Add dsp2 to sim_igen_machine.
	* configure: Regenerate.
	* dsp.igen (do_ph_op): Add MUL support when op = 2.
	(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
	(mulq_rs.ph): Use do_ph_mulq.
	(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
	* mips.igen: Add dsp2 model and include dsp2.igen.
	(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
	for *mips32r2, *mips64r2, *dsp.
	(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
	for *mips32r2, *mips64r2, *dsp2.
	* dsp2.igen: New file for MIPS DSP REV 2 ASE.

	[ sim/testsuite/sim/mips/ChangeLog ]
	* basic.exp: Run the dsp2 test.
	* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
	* mips32-dsp2.s: New test.
2007-02-20 13:28:54 +00:00
Alan Modra 77da924b40 gas/
* config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
	* config/tc-i386.c: Wrap overly long lines, whitespace fixes.
	(process_operands): Move old Seg2ShortForm and Seg3ShortForm
	code, and test for these insns using a combination of
	opcode_modifier and operand_types.
include/opcode/
	* i386.h (i386_optab): Replace all occurrences of Seg2ShortForm
	and Seg3ShortFrom with Shortform.
2007-02-13 23:23:53 +00:00
H.J. Lu 79010c3b34 gas/testsuite/
2007-02-11  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/4027
	* gas/i386/opcode.s: Add more tests for "test".
	* i386/opcode-intel.d: Updated.
	* gas/i386/opcode-suffix.d: Likewise.
	* gas/i386/opcode.d: Likewise.

include/opcode/

2007-02-11  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/4027
	* i386.h (i386_optab): Put the real "test" before the pseudo
	one.
2007-02-12 04:51:40 +00:00
Kazu Hirata 2a327eef52 bfd/
* archures.c (bfd_mach_cpu32_fido): Rename to bfd_mach_fido.
	* bfd-in2.h: Regenerate.
	* cpu-m68k.c (arch_info_struct): Use bfd_mach_fido instead of
	bfd_mach_cpu32_fido.
	(m68k_arch_features): Use fido_a instead of cpu32.
	(bfd_m68k_compatible): Reject the combination of Fido and
	ColdFire.  Accept the combination of CPU32 and Fido with a
	warning.
	* elf32-m68k.c (elf32_m68k_object_p,
	elf32_m68k_merge_private_bfd_data,
	elf32_m68k_print_private_bfd_data): Treat Fido as an
	architecture by itself.

binutils/
	* readelf.c (get_machine_flags): Treat Fido as an architecture
	by itself.

gas/
	* config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
	architecture by itself.
	(m68k_ip): Don't issue a warning for tbl instructions on fido.
	(m68k_elf_final_processing): Treat Fido as an architecture by
	itself.

include/elf/
	* m68k.h (EF_M68K_FIDO): New.
	(EF_M68K_ARCH_MASK): OR EF_M68K_FIDO.
	(EF_M68K_CPU32_FIDO_A, EF_M68K_CPU32_MASK): Remove.

include/opcode/
	* m68k.h (m68010up): OR fido_a.

opcodes/
	* m68k-opc.c (m68k_opcodes): Replace cpu32 with
	cpu32 | fido_a except on tbl instructions.
2007-01-08 18:42:37 +00:00
Kazu Hirata c5a95a529e bfd/
* archures.c (bfd_mach_cpu32_fido): New.
	(bfd_mach_mcf_isa_a_nodiv, bfd_mach_mcf_isa_a,
	bfd_mach_mcf_isa_a_mac, bfd_mach_mcf_isa_a_emac,
	bfd_mach_mcf_isa_aplus, bfd_mach_mcf_isa_aplus_mac,
	bfd_mach_mcf_isa_aplus_emac, bfd_mach_mcf_isa_b_nousp,
	bfd_mach_mcf_isa_b_nousp_mac, bfd_mach_mcf_isa_b_nousp_emac,
	bfd_mach_mcf_isa_b, bfd_mach_mcf_isa_b_mac,
	bfd_mach_mcf_isa_b_emac, bfd_mach_mcf_isa_b_float,
	bfd_mach_mcf_isa_b_float_mac, bfd_mach_mcf_isa_b_float_emac):
	Increment the defined values.
	* bfd-in2.h: Regenerate.
	* cpu-m68k.c (arch_info_struct): Add en entry for
	bfd_mach_cpu32_fido.
	* elf32-m68k.c (elf32_m68k_object_p): Handle
	EF_M68K_CPU32_FIDO_A.
	(elf32_m68k_merge_private_bfd_data): Use EF_M68K_CPU32_MASK.
	(elf32_m68k_print_private_bfd_data): Handle
	EF_M68K_CPU32_FIDO_A.

binutils/
	* readelf.c (get_machine_flags): Handle EF_M68K_CPU32_FIDO_A.

gas/
	* config/tc-m68k.c (cpu_of_arch): Add fido.
	(m68k_archs, m68k_cpu): Add entries for fido.
	(m68k_elf_final_processing): Handle EF_M68K_CPU32_FIDO_A.

include/elf/
	* m68k.h (EF_M68K_CPU32_FIDO_A, EF_M68K_CPU32_MASK): New.

include/opcode/
	* m68k.h (fido_a): New.
2006-12-25 22:39:21 +00:00
Kazu Hirata b0ee53e9bc * m68k.h (mcfmac, mcfemac, cfloat, mcfhwdiv, mcfisa_a,
mcfisa_aa, mcfisa_b, mcfusp, mcf_mask): Double the defined
	values.
2006-12-24 02:58:37 +00:00
H.J. Lu 2525dd2eab Remove entries checked in by accident. 2006-11-27 22:05:26 +00:00
H.J. Lu baf35b5d76 gas/
2006-11-08  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.h (CpuPNI): Removed.
	(CpuUnknownFlags): Replace CpuPNI with CpuSSE3.
	* config/tc-i386.c (md_assemble): Likewise.

include/opcode/

2006-11-08  H.J. Lu  <hongjiu.lu@intel.com>

	* i386.h (i386_optab): Replace CpuPNI with CpuSSE3.
2006-11-08 19:56:02 +00:00
Nick Clifton a6c48c3850 * tc-score.c (data_op2): Check invalid operands.
(my_get_expression): Const operand of some instructions can not be symbol in assembly.
  (get_insn_class_from_type): Handle instruction type Insn_internal.
  (do_macro_ldst_label): Modify inst.type.
  (Insn_PIC): Delete.
* score-inst.h (enum score_insn_type): Add Insn_internal.
* tc-score.c (data_op2): The immediate value in lw is 15 bit signed.
* score-dis.c (print_insn): Correct the error code to print correct PCE instruction disassembly.
2006-10-31 09:54:41 +00:00
Alan Modra ddb2c9e81c New Cell SPU port. 2006-10-25 06:49:18 +00:00
Alan Modra e359f110ba Add powerpc cell support. 2006-10-24 01:27:28 +00:00
Michael Meissner 7e39651a54 Fix AMDFAM10 POPCNT instruction 2006-10-23 22:53:28 +00:00
H.J. Lu 5c9dda86e5 gas/
2006-09-28  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.h (CpuMNI): Renamed to ...
	(CpuSSSE3): This.
	(CpuUnknownFlags): Updated.
	(processor_type): Replace PROCESSOR_YONAH with PROCESSOR_CORE
	and PROCESSOR_MEROM with PROCESSOR_CORE2.
	* config/tc-i386.c: Updated.
	* doc/c-i386.texi: Likewise.

	* config/tc-i386.c (cpu_arch): Add ".ssse3", "core" and "core2".

include/opcode/

2006-09-28  H.J. Lu  <hongjiu.lu@intel.com>

	* i386.h: Replace CpuMNI with CpuSSSE3.
2006-09-28 14:06:36 +00:00
Joseph Myers 1aeca89244 bfd/
2006-09-26  Mark Shinwell  <shinwell@codesourcery.com>
            Joseph Myers  <joseph@codesourcery.com>
            Ian Lance Taylor  <ian@wasabisystems.com>
            Ben Elliston  <bje@wasabisystems.com>

	* archures.c: Add definition for bfd_mach_arm_iWMMXt2.
	* cpu-arm.c (processors): Add bfd_mach_arm_iWMMXt2.
	(arch_info_struct, bfd_arm_update_notes): Likewise.
	(architectures): Likewise.
	(bfd_arm_merge_machines): Check for iWMMXt2.
	* bfd-in2.h: Rebuild.

gas/
2006-09-26  Mark Shinwell  <shinwell@codesourcery.com>
            Joseph Myers  <joseph@codesourcery.com>
            Ian Lance Taylor  <ian@wasabisystems.com>
            Ben Elliston  <bje@wasabisystems.com>

	* config/tc-arm.c (arm_cext_iwmmxt2): New.
	(enum operand_parse_code): New code OP_RIWR_I32z.
	(parse_operands): Handle OP_RIWR_I32z.
	(do_iwmmxt_wmerge): New function.
	(do_iwmmxt_wldstd): Handle iwmmxt2 case where second operand is
	a register.
	(do_iwmmxt_wrwrwr_or_imm5): New function.
	(insns): Mark instructions as RIWR_I32z as appropriate.
	Also add torvsc<b,h,w>, wabs<b,h,w>, wabsdiff<b,h,w>,
	waddbhus<l,m>, waddhc, waddwc, waddsubhx, wavg4{r}, wmaddu{x,n},
	wmadds{x,n}, wmerge, wmiaxy{n}, wmiawxy{n}, wmul<sm,um>{r},
	wmulw<um,sm,l>{r}, wqmiaxy{n}, wqmulm{r}, wqmulwm{r}, wsubaddhx.
	(md_begin): Handle IWMMXT2.
	(arm_cpus): Add iwmmxt2.
	(arm_extensions): Likewise.
	(arm_archs): Likewise.

gas/testsuite/
2006-09-26  Mark Shinwell  <shinwell@codesourcery.com>
            Joseph Myers  <joseph@codesourcery.com>
            Ian Lance Taylor  <ian@wasabisystems.com>
            Ben Elliston  <bje@wasabisystems.com>

	* gas/arm/iwmmxt2.s: New file.
	* gas/arm/iwmmxt2.d: New file.

include/opcode/
2006-09-26  Mark Shinwell  <shinwell@codesourcery.com>
            Joseph Myers  <joseph@codesourcery.com>
            Ian Lance Taylor  <ian@wasabisystems.com>
            Ben Elliston  <bje@wasabisystems.com>

	* arm.h (ARM_CEXT_IWMMXT2, ARM_ARCH_IWMMXT2): Define.

opcodes/
2006-09-26  Mark Shinwell  <shinwell@codesourcery.com>
            Joseph Myers  <joseph@codesourcery.com>
            Ian Lance Taylor  <ian@wasabisystems.com>
            Ben Elliston  <bje@wasabisystems.com>

	* arm-dis.c (coprocessor_opcodes): The X-qualifier to WMADD may
	only be used with the default multiply-add operation, so if N is
	set, don't bother printing X.  Add new iwmmxt instructions.
	(IWMMXT_INSN_COUNT): Update.
	(iwmmxt_wwssnames): Qualify "wwss" names at index 2, 6, 10 and 14
	with a 'c' suffix.
	(print_insn_coprocessor): Check for iWMMXt2.  Handle format
	specifiers 'r', 'i'.
2006-09-26 12:04:45 +00:00
Nick Clifton 7aa8dc8eb0 Add support for Score target. 2006-09-16 23:51:50 +00:00
H.J. Lu 62f94a893e 2006-07-14 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Remove InvMem from maskmovq, movhlps,
	movlhps, movmskps, pextrw, pmovmskb, movmskpd, maskmovdqu,
	movdq2q and movq2dq.
2006-07-14 16:15:27 +00:00
Michael Meissner 2d73611e56 Add amdfam10 instructions 2006-07-13 22:25:48 +00:00
H.J. Lu acfd62fdfa gas/testsuite/
2006-06-12  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/i386.exp: Run nops and x86-64-nops.

	* gas/i386/nops.d: New file.
	* gas/i386/nops.s: Likewise.
	* gas/i386/x86-64-nops.d: Likewise.
	* gas/i386/x86-64-nops.s: Likewise.

include/opcode/

2006-06-12  H.J. Lu  <hongjiu.lu@intel.com>

	* i386.h (i386_optab): Add "nop" with memory reference.

opcodes/

2006-06-12  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (dis386_twobyte): Use "nopQ" for 0x1f.
	(twobyte_has_modrm): Set 1 for 0x1f.
2006-06-12 18:59:36 +00:00
H.J. Lu 2d853d0e39 gas/
2006-06-12  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (process_suffix): Don't add rex64 for
	"xchg %rax,%rax".

gas/testsuite/

2006-06-12  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/opcode.s: Add "xchg %ax,%ax".
	* gas/i386/opcode.d: Updated.

	* gas/i386/x86-64-opcode.s: Add xchg %ax,%ax, xchg %eax,%eax,
	xchg %rax,%rax, rex64 xchg %rax,%rax and xchg %rax,%r8.
	* gas/i386/x86-64-opcode.d: Updated.

include/opcode/

2006-06-12  H.J. Lu  <hongjiu.lu@intel.com>

	* i386.h (i386_optab): Update comment for 64bit NOP.

opcodes/

2006-06-12  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (NOP_Fixup): Removed.
	(NOP_Fixup1): New.
	(NOP_Fixup2): Likewise.
	(dis386): Use NOP_Fixup1 and NOP_Fixup2 on 0x90.
2006-06-12 18:55:42 +00:00
Alan Modra 48df10c776 include/opcode/
* ppc.h (PPC_OPCODE_POWER6): Define.
	Adjust whitespace.
gas/
	* config/tc-ppc.c (parse_cpu): Handle "-mpower6".
	(md_show_usage): Document it.
	(ppc_setup_opcodes): Test power6 opcode flag bits.
	* doc/c-ppc.texi (PowerPC-Opts): Document "-mpower6".
opcodes/
	* ppc-dis.c (powerpc_dialect): Handle power6 option.
	(print_ppc_disassembler_options): Mention power6.
2006-06-07 05:23:59 +00:00
Thiemo Seufer c281fc320f [ gas/ChangeLog ]
* config/tc-mips.c (ISA_SUPPORTS_DSP64): New macro.
	(CPU_HAS_MIPS3D, CPU_HAS_MDMX, CPU_HAS_DSP, CPU_HAS_MT): Delete.
	(macro_build): Update comment.
	(mips_ip): Allow DSP64 instructions for MIPS64R2.
	(mips_after_parse_args): Remove uses of CPU_HAS_MIPS3D and
	CPU_HAS_MDMX.
	(mips_cpu_info): Fix formatting. Add MIPS_CPU_ASE_MIPS3D and
	MIPS_CPU_ASE_MDMX flags for sb1.

	[ gas/testsuite/ChangeLog ]
	* gas/mips/mips64-dsp.s, gas/mips/mips64-dsp.d: New DSP64 tests.
	* gas/mips/mips.exp: Run DSP64 tests.

	[ opcodes/ChangeLog ]
	* mips-dis.c: Disassemble DSP64 instructions for MIPS64R2.
	* mips-opc.c: Add DSP64 instructions.
2006-06-06 10:49:48 +00:00
Thiemo Seufer 9042dfec74 [ gas/ChangeLog ]
* config/tc-mips.c (macro_build): Use INSERT_OPERAND wherew
	appropriate.
	(mips16_macro_build): Use MIPS16_INSERT_OPERAND where appropriate.
	(mips_ip): Make overflowed/underflowed constant arguments in DSP
	and MT instructions a fatal error. Use INSERT_OPERAND where
	appropriate. Improve warnings for break and wait code overflows.
	Use symbolic constant of OP_MASK_COPZ.
	(mips16_ip): Use MIPS16_INSERT_OPERAND where appropriate.

	[ gas/testsuite/ChangeLog ]
	* gas/mips/mips32-dsp.d, gas/mips/mips32-dsp.s, gas/mips/mips32-mt.d,
	gas/mips/mips32-mt.s: Remove instructions with invalid arguments.
	* gas/mips/mips32-dsp.l, gas/mips/mips32-mt.l: Delete file.

	[ include/opcode/ChangeLog ]
	* mips.h: Improve description of MT flags.
2006-06-05 16:28:36 +00:00
Richard Sandiford fed9f6504c include/opcodes/
* m68k.h (mcf_mask): Define.

opcodes/
	* m68k-opc.c (m68k_opcodes): Fix the masks of the Coldfire fmovemd
	and fmovem entries.  Put register list entries before immediate
	mask entries.  Use "l" rather than "L" in the fmovem entries.
	* m68k-dis.c (match_insn_m68k): Remove the PRIV argument and work it
	out from INFO.
	(m68k_scan_mask): New function, split out from...
	(print_insn_m68k): ...here.  If no architecture has been set,
	first try printing an m680x0 instruction, then try a Coldfire one.

gas/testsuite/
	* gas/m68k/mcf-fpu.s: Add fmovemd and fmovem instructions.
	* gas/m68k/mcf-fpu.d: Adjust accordingly.
2006-05-25 08:09:03 +00:00
Thiemo Seufer 95d55a568f [ gas/ChangeLog ]
* config/tc-mips.c (macro_build): Add case 'k' to handle cache
	instruction.
	(macro): Add new case M_CACHE_AB.

	[ opcodes/ChangeLog ]
	* mips-opc.c: Add macro for cache instruction.

	[ include/opcode/ChangeLog ]
	* mips.h (enum): Add macro M_CACHE_AB.
2006-05-05 15:41:23 +00:00
Thiemo Seufer 4490f3545a [ gas/testsuite/ChangeLog ]
2006-05-04  Thiemo Seufer  <ths@mips.com>
            Nigel Stephens  <nigel@mips.com>

        * gas/mips/mips.exp: Run mips32-dsp tests only for mips32r2.
        * gas/mips/set-arch.d: Adjust according to opcode table changes.

[ include/opcode/ChangeLog ]
2006-05-04  Thiemo Seufer  <ths@mips.com>
            Nigel Stephens  <nigel@mips.com>
            David Ung  <davidu@mips.com>

        * mips.h: Add INSN_SMARTMIPS define.

[ opcodes/ChangeLog ]
2006-05-04  Thiemo Seufer  <ths@mips.com>
            Nigel Stephens  <nigel@mips.com>
            David Ung  <davidu@mips.com>

        * mips-dis.c (mips_arch_choices): Add smartmips instruction
        decoding to MIPS32 and MIPS32R2.  Limit DSP decoding to release
        2 ISAs.  Add MIPS3D decoding to MIPS32R2.  Add MT decoding to
        MIPS64R2.
        * mips-opc.c: fix random typos in comments.
        (INSN_SMARTMIPS): New defines.
        (mips_builtin_opcodes): Add paired single support for MIPS32R2.
        Move bc3f, bc3fl, bc3t, bc3tl downwards.  Move flushi, flushd,
        flushid, wb upwards.  Move cfc3, ctc3 downwards.  Rework the
        FP_S and FP_D flags to denote single and double register
        accesses separately.  Move dmfc3, dmtc3, mfc3, mtc3 downwards.
        Allow jr.hb and jalr.hb for release 1 ISAs.  Allow luxc1, suxc1
        for MIPS32R2.  Add SmartMIPS instructions.  Add two-argument
        variants of bc2f, bc2fl, bc2t, bc2tl.  Add mfhc2, mthc2 to
        release 2 ISAs.
        * mips16-opc.c (mips16_opcodes): Add sdbbp instruction.
2006-05-04 10:47:05 +00:00
Thiemo Seufer 0015de8d38 [ gas/ChangeLog ]
2006-04-30  Thiemo Seufer  <ths@mips.com>
            David Ung  <davidu@mips.com>

        * config/tc-mips.c (validate_mips_insn): Handling of udi cases.
        (mips_immed): New table that records various handling of udi
        instruction patterns.
        (mips_ip): Adds udi handling.

[ include/opcode/ChangeLog ]
2006-04-30  Thiemo Seufer  <ths@mips.com>
            David Ung  <davidu@mips.com>

        * mips.h: Defines udi bits and masks.  Add description of
        characters which may appear in the args field of udi
        instructions.

[ opcodes/ChangeLog ]
2006-04-30  Thiemo Seufer  <ths@mips.com>
            David Ung  <davidu@mips.com>

        * mips-opc.c (mips_builtin_opcodes): Add udi instructions
        "udi0" to "udi15".
        * mips-dis.c (print_insn_args): Adds udi argument handling.
2006-04-30 18:34:39 +00:00
H.J. Lu 0ba7a49150 Move opcode ChangeLog entry to opcode/ChangeLog. 2006-04-29 16:54:51 +00:00
Thiemo Seufer 564d770d9a * mips.h: Improve comments describing the bitfield instruction
fields.
2006-04-26 18:19:15 +00:00
Julian Brown 13ac451951 * opcode/arm.h (FPU_VFP_EXT_V3): Define constant.
(FPU_NEON_EXT_V1): Likewise.
	(FPU_VFP_HARD): Update.
	(FPU_VFP_V3): Define macro.
	(FPU_ARCH_VFP_V3, FPU_ARCH_VFP_V3_PLUS_NEON_V1): Define macros.
2006-04-26 15:41:16 +00:00
Nick Clifton 853f446a98 Add support for attiny261, attiny461, attiny861, attiny25, attiny45,
attiny85, attiny24, attiny44, attiny84, at90pwm2, at90pwm3, atmega164,
atmega324, atmega644, atmega329, atmega3290, atmega649, atmega6490,
atmega406, atmega640, atmega1280, atmega1281, at90can32, at90can64,
at90usb646, at90usb647, at90usb1286 and at90usb1287.
Move atmega48 and atmega88 from AVR_ISA_M8 to AVR_ISA_PWMx.
2006-04-07 15:18:08 +00:00
Nathan Sidwell cdc2256b76 gas:
* config/tc-m68k.c (m68000_control_regs, m68010_control_regs,
	m68020_control_regs, m68040_control_regs, m68060_control_regs,
	mcf_control_regs, mcf5208_control_regs, mcf5213_control_regs,
	mcf5329_control_regs, mcf5249_control_regs, mcf528x_control_regs,
	mcfv4e_control_regs, m68010_control_regs): Rename and reorder to ...
	(m68000_ctrl, m68010_ctrl, m68020_ctrl, m68040_ctrl, m68060_ctrl,
	mcf_ctrl, mcf5208_ctrl, mcf5213_ctrl, mcf5235_ctrl, mcf5249_ctrl,
	mcf5216_ctrl, mcf5250_ctrl, mcf5271_ctrl, mcf5272_ctrl,
	mcf5282_ctrl, mcfv4e_ctrl): ... these.
	(mcf5275_ctrl, mcf5329_ctrl, mcf5373_ctrl): New.
	(struct m68k_cpu): Change chip field to control_regs.
	(current_chip): Remove.
	(control_regs): New.
	(m68k_archs, m68k_extensions): Adjust.
	(m68k_cpus): Reorder to be in cpu number order.  Adjust.
	(CPU_ALLOW_MC, CPU_ALLOW_NEGATION): Remove.
	(find_cf_chip): Reimplement for new organization of cpu table.
	(select_control_regs): Remove.
	(mri_chip): Adjust.
	(struct save_opts): Save control regs, not chip.
	(s_save, s_restore): Adjust.
	(m68k_lookup_cpu): Give deprecated warning when necessary.
	(m68k_init_arch): Adjust.
	(md_show_usage): Adjust for new cpu table organization.

	include/opcodes:
	* m68k.h (cpu_m68k, cpu_cf, cpu_m68000, cpu_m68008, cpu_m68010,
	cpu_m68020, cpu_m68ec030, cpu_m68040, cpu_m68060, cpu_m68851,
	cpu_m68881, cpu_m68882, cpu_cpu32, cpu_cf5200, cpu_cf5206e,
	cpu_cf5208, cpu_cf521x, cpu_cf5213, cpu_cf5249, cpu_cf528x,
	cpu_cf5307, cpu_cf5329, cpu_cf5407, cpu_cf547x, cpu_cf548x): Remove.
2006-03-28 07:19:16 +00:00
Paul Brook dd665069d7 2006-03-10 Paul Brook <paul@codesourcery.com>
include/opcode/
	* arm.h (ARM_AEXT_V7_ARM): Include v6ZK extensions.
2006-03-10 17:16:49 +00:00
Nathan Sidwell 9c39dc2a8c missing changelog entry for my 2006-02-07 patch
* m68k.h (m68008, m68ec030, m68882): Remove.
	(m68k_mask): New.
	(cpu_m68k, cpu_cf): New.
	(mcf5200, mcf5206e, mcf521x, mcf5249, mcf528x, mcf5307, mcf5407
2006-03-06 13:46:53 +00:00
John David Anglin 8b48d53f29 * hppa.h (pa_opcodes): Reorder bb opcodes so that pa10 opcodes come
first.  Correct mask of bb "B" opcode.
2006-03-04 22:11:48 +00:00
H.J. Lu e3ff04608e gas/
2006-02-27  H.J. Lu <hongjiu.lu@intel.com>

	* gas/config/tc-i386.c (output_insn): Support Intel Merom New
	Instructions.

	* gas/config/tc-i386.h (CpuMNI): New.
	(CpuUnknownFlags): Add CpuMNI.

gas/testsuite/

2006-02-27  H.J. Lu <hongjiu.lu@intel.com>

	* gas/i386/i386.exp: Add merom and x86-64-merom.

	* gas/i386/merom.d: New file.
	* gas/i386/merom.s: Likewise.
	* gas/i386/x86-64-merom.d: Likewise.
	* gas/i386/x86-64-merom.s: Likewise.

include/opcode/

2006-02-27  H.J. Lu <hongjiu.lu@intel.com>

	* i386.h (i386_optab): Support Intel Merom New Instructions.

opcodes/

2006-02-27  H.J. Lu <hongjiu.lu@intel.com>

	* i386-dis.c (IS_3BYTE_OPCODE): New for 3-byte opcodes used by
	Intel Merom New Instructions.
	(THREE_BYTE_0): Likewise.
	(THREE_BYTE_1): Likewise.
	(three_byte_table): Likewise.
	(dis386_twobyte): Use THREE_BYTE_0 for entry 0x38. Use
	THREE_BYTE_1 for entry 0x3a.
	(twobyte_has_modrm): Updated.
	(twobyte_uses_SSE_prefix): Likewise.
	(print_insn): Handle 3-byte opcodes used by Intel Merom New
	Instructions.
2006-02-27 15:35:37 +00:00
Paul Brook 70b232636f 2006-02-24 Paul Brook <paul@codesourcery.com>
gas/
	* config/arm/tc-arm.c (arm_ext_v6_notm, arm_ext_div, arm_ext_v7,
	arm_ext_v7a, arm_ext_v7r, arm_ext_v7m): New variables.
	(struct asm_barrier_opt): Define.
	(arm_v7m_psr_hsh, arm_barrier_opt_hsh): New variables.
	(parse_psr): Accept V7M psr names.
	(parse_barrier): New function.
	(enum operand_parse_code): Add OP_oBARRIER.
	(parse_operands): Implement OP_oBARRIER.
	(do_barrier): New function.
	(do_dbg, do_pli, do_t_barrier, do_t_dbg, do_t_div): New functions.
	(do_t_cpsi): Add V7M restrictions.
	(do_t_mrs, do_t_msr): Validate V7M variants.
	(md_assemble): Check for NULL variants.
	(v7m_psrs, barrier_opt_names): New tables.
	(insns): Add V7 instructions.  Mark V6 instructions absent from V7M.
	(md_begin): Initialize arm_v7m_psr_hsh and arm_barrier_opt_hsh.
	(arm_cpu_option_table): Add Cortex-M3, R4 and A8.
	(arm_arch_option_table): Add armv7, armv7a, armv7r and armv7m.
	(struct cpu_arch_ver_table): Define.
	(cpu_arch_ver): New.
	(aeabi_set_public_attributes): Use cpu_arch_ver.  Set
	Tag_CPU_arch_profile.
	* doc/c-arm.texi: Document new cpu and arch options.
gas/testsuite/
	* gas/arm/thumb32.d: Fix expected msr and mrs output.
	* gas/arm/arch7.d: New test.
	* gas/arm/arch7.s: New test.
	* gas/arm/arch7m-bad.l: New test.
	* gas/arm/arch7m-bad.d: New test.
	* gas/arm/arch7m-bad.s: New test.
include/opcode/
	* arm.h: Add V7 feature bits.
opcodes/
	* arm-dis.c (arm_opcodes): Add V7 instructions.
	(thumb32_opcodes): Ditto.  Handle V7M MSR/MRS variants.
	(print_arm_address): New function.
	(print_insn_arm): Use it.  Add 'P' and 'U' cases.
	(psr_name): New function.
	(print_insn_thumb32): Add 'U', 'C' and 'D' cases.
2006-02-24 15:36:36 +00:00
H.J. Lu 67f0a0341c bfd/
2006-02-23  H.J. Lu  <hongjiu.lu@intel.com>

	* cpu-ia64-opc.c (ins_immu5b): New.
	(ext_immu5b): Likewise.
	(elf64_ia64_operands): Add IMMU5b.

gas/

2006-02-23  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-ia64.c (operand_match): Handle IA64_OPND_IMMU5b.

gas/testsuite/

2006-02-23  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/ia64/opc-i.s: Add tests for tf.
	* gas/ia64/pseudo.s: Likewise.
	* gas/ia64/opc-i.d: Updated.
	* gas/ia64/pseudo.d: Likewise.

include/opcode/

2006-02-23  H.J. Lu  <hongjiu.lu@intel.com>

	* ia64.h (ia64_opnd): Add IA64_OPND_IMMU5b.

opcodes/

2006-02-23  H.J. Lu  <hongjiu.lu@intel.com>

	* ia64-opc-i.c (bXc): New.
	(mXc): Likewise.
	(OpX2TaTbYaXcC): Likewise.
	(TF). Likewise.
	(TFCM). Likewise.
	(ia64_opcodes_i): Add instructions for tf.

	* ia64-opc.h (IMMU5b): New.

	* ia64-asmtab.c: Regenerated.
2006-02-23 21:36:17 +00:00
Nathan Sidwell 86fdf2166a * bfd/archures.c (bfd_mach_mcf5200, bfd_mach_mcf5206e,
bfd_mach_mcf5307, bfd_mach_mcf5407, bfd_mach_mcf528x,
	bfd_mach_mcfv4e, bfd_mach_mcf521x, bfd_mach_mcf5249,
	bfd_mach_mcf547x, bfd_mach_mcf548x): Remove.
	(bfd_mach_mcf_isa_a, bfd_mach_mcf_isa_a_div,
	bfd_mach_mcf_isa_a_div_mac, bfd_mach_mcf_isa_a_div_emac,
	bfd_mach_mcf_isa_aplus, bfd_mach_mcf_isa_aplus_mac,
	bfd_mach_mcf_isa_aplus_emac, bfd_mach_mcf_isa_aplus_usp,
	bfd_mach_mcf_isa_aplus_usp_mac, bfd_mach_mcf_isa_aplus_usp_emac,
	bfd_mach_mcf_isa_b, bfd_mach_mcf_isa_b_mac, bfd_mach_mcf_isa_b_emac,
	bfd_mach_mcf_isa_b_usp_float, bfd_mach_mcf_isa_b_usp_float_mac,
	bfd_mach_mcf_isa_b_usp_float_emac): New.
	(bfd_default_scan): Update coldfire mapping.
	* bfd/bfd-in.h (bfd_m68k_mach_to_features,
	bfd_m68k_features_to_mach): Declare.
	* bfd/bfd-in2.h: Rebuilt.
	* bfd/cpu-m68k.c (arch_info_struct): Add new coldfire machines,
	adjust legacy names.
	(m68k_arch_features): New.
	(bfd_m68k_mach_to_features,
	bfd_m68k_features_to_mach): Define.
	* bfd/elf32-m68k.c (elf32_m68k_object_p): New.
	(elf32_m68k_merge_private_bfd_data): Merge the CF EF flags.
	(elf32_m68k_print_private_bfd_data): Print the CF EF flags.
	(elf_backend_object_p): Define.
	* bfd/ieee.c (ieee_write_processor): Update coldfire machines.
	* bfd/libbfd.h: Rebuilt.

	* gas/config/tc-m68k.c (mcf5208_control_regs, mcf5213_control_regs,
	mcf5329_control_regs): New.
	(not_current_architecture, selected_arch, selected_cpu): New.
	(m68k_archs, m68k_extensions): New.
	(archs): Renamed to ...
	(m68k_cpus): ... here.  Adjust.
	(n_arches): Remove.
	(md_pseudo_table): Add arch and cpu directives.
	(find_cf_chip, m68k_ip): Adjust table scanning.
	(no_68851, no_68881): Remove.
	(md_assemble): Lazily initialize.
	(select_control_regs): Adjust cpu names. Add 5208, 5213, 5329.
	(md_init_after_args): Move functionality to m68k_init_arch.
	(mri_chip): Adjust table scanning.
	(md_parse_option): Reimplement 'm' processing to add -march & -mcpu
	options with saner parsing.
	(m68k_lookup_cpu, m68k_set_arch, m68k_set_cpu, m68k_set_extension,
	m68k_init_arch): New.
	(s_m68k_cpu, s_m68k_arch): New.
	(md_show_usage): Adjust.
	(m68k_elf_final_processing): Set CF EF flags.
	* gas/config/tc-m68k.h (m68k_init_after_args): Remove.
	(tc_init_after_args): Remove.
	* gas/doc/c-m68k.texi (M68K-Opts): Document -march, -mcpu options.
	(M68k-Directives): Document .arch and .cpu directives.

	* gas/testsuite/gas/m68k/all.exp: Add arch-cpu-1 test.
	* gas/testsuite/gas/m68k/arch-cpu-1.[sd]: New.

	* include/elf/m68k.h (EF_CPU32, EF_M68000, EF_CFV4E): Rename to ...
	(EF_M68K_CPU32, EF_M68K_M68000, EF_M68K_CFV4E): ... here.
	(EF_M68K_ISA_MASK, EF_M68K_ISA_A, EF_M68K_M68K_ISA_A_PLUS,
	EF_M68K_ISA_B, EF_M68K_HW_DIV, EF_M68K_MAC_MASK, EF_M68K_MAC,
	EF_M68K_EMAC, EF_M68K_USP, EF_M68K_FLOAT): New.

	* include/opcode/m68k.h (m68008, m68ec030, m68882): Remove.
	(m68k_mask): New.
	(cpu_m68k, cpu_cf): New.
	(mcf5200, mcf5206e, mcf521x, mcf5249, mcf528x, mcf5307, mcf5407,
	mcf5470, mcf5480): Rename to cpu_<foo>. Add m680x0 variants.

	* opcodes/m68k-dis.c (print_insn_m68k): Use
	bfd_m68k_mach_to_features.

	* binutils/readelf.c (get_machine_flags): Add logic for EF_M68K flags.
2006-02-07 19:01:10 +00:00
Paul Brook 82cac98f3e 2006-01-31 Paul Brook <paul@codesourcery.com>
Richard Earnshaw <rearnsha@arm.com>

	* gas/config/tc-arm.c: Use arm_feature_set.
	(arm_ext_*, arm_arch_full, arm_arch_t2, arm_arch_none,
	arm_cext_iwmmxt, arm_cext_xscale, arm_cext_maverick, fpu_fpa_ext_v1,
	fpu_fpa_ext_v2, fpu_vfp_ext_v1xd, fpu_vfp_ext_v1, fpu_vfp_ext_v2):
	New variables.
	(insns): Use them.
	(md_atof, opcode_select, opcode_select, md_assemble, md_assemble,
	md_begin, arm_parse_extension, arm_parse_cpu, arm_parse_arch,
	arm_parse_fpu, arm_parse_float_abi, aeabi_set_public_attributes,
	s_arm_cpu, s_arm_arch, s_arm_fpu): Use macros for accessing CPU
	feature flags.
	(arm_legacy_option_table, arm_option_cpu_value_table): New types.
	(arm_opts): Move old cpu/arch options from here...
	(arm_legacy_opts): ... to here.
	(md_parse_option): Search arm_legacy_opts.
	(arm_cpus, arm_archs, arm_extensions, arm_fpus)
	(arm_float_abis, arm_eabis): Make const.

	* include/opcode/arm.h: Use ARM_CPU_FEATURE.
	(ARM_AEXT_*, FPU_ENDIAN_PURE, FPU_VFP_HARD): New.
	(arm_feature_set): Change to a structure.
	(ARM_CPU_HAS_FEATURE, ARM_MERGE_FEATURE_SETS, ARM_CLEAR_FEATURE,
	ARM_FEATURE): New macros.
2006-01-31 14:11:13 +00:00
Hans-Peter Nilsson 1094df9f2d * cris.h (MOVE_M_TO_PREG_OPCODE, MOVE_M_TO_PREG_ZBITS)
(MOVE_PC_INCR_OPCODE_PREFIX, MOVE_PC_INCR_OPCODE_SUFFIX): New macros.
	(ADD_PC_INCR_OPCODE): Don't define.
2005-12-07 12:53:57 +00:00
H.J. Lu 466fc394b8 gas/
2005-12-06  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/1874
	* config/tc-i386.c (match_template): Handle monitor.
	(process_suffix): Likewise.

gas/testsuite/

2005-12-06  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/1874
	* gas/i386/i386.exp: Add x86-64-prescott for 64bit.

	* gas/i386/prescott.s: Test address size override for monitor.
	* gas/i386/prescott.d: Updated.

	* gas/i386/x86-64-prescott.d: New file.
	* gas/i386/x86-64-prescott.s: Likewise.

include/opcode/

2005-12-06  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/1874
	* i386.h (i386_optab): Add 64bit support for monitor and mwait.

opcodes/

2005-12-06  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/1874
	* i386-dis.c (address_mode): New enum type.
	(address_mode): New variable.
	(mode_64bit): Removed.
	(ckprefix): Updated to check address_mode instead of mode_64bit.
	(prefix_name): Likewise.
	(print_insn): Likewise.
	(putop): Likewise.
	(print_operand_value): Likewise.
	(intel_operand_size): Likewise.
	(OP_E): Likewise.
	(OP_G): Likewise.
	(set_op): Likewise.
	(OP_REG): Likewise.
	(OP_I): Likewise.
	(OP_I64): Likewise.
	(OP_OFF): Likewise.
	(OP_OFF64): Likewise.
	(ptr_reg): Likewise.
	(OP_C): Likewise.
	(SVME_Fixup): Likewise.
	(print_insn): Set address_mode.
	(PNI_Fixup): Add 64bit and address size override support for
	monitor and mwait.
2005-12-06 12:40:57 +00:00
Thiemo Seufer 70c500b343 * mips.h: Assign 'm'/'M' codes to MIPS16e save/restore
instructions.  Define MIPS16_ALL_ARGS and MIPS16_ALL_STATICS for
        save/restore encoding of the args field.

        * mips16-opc.c: Add MIPS16e save/restore opcodes.
        * mips-dis.c (print_mips16_insn_arg): Handle printing of 'm'/'M'
        codes for save/restore.

        * config/tc-mips.c (mips16_ip): Add handling of 'm' and 'M' codes
        for the MIPS16e save/restore instructions.

        * gas/mips/mips.exp: Run new save/restore tests.
        * gas/testsuite/gas/mips/mips16e-save.s: New test for generating
        different styles of save/restore instructions.
        * gas/testsuite/gas/mips/mips16e-save.d: New.
2005-11-14 02:25:39 +00:00
Dave Brolley 39e9e2b0c9 2005-10-28 Dave Brolley <brolley@redhat.com>
Contribute the following changes:
        2003-09-29  Dave Brolley  <brolley@redhat.com>

        * dis-asm.h (disassemble_info): insn_sets now (void *) to allow for
        more exotic underlying types to be used.
2005-10-28 19:41:01 +00:00
Dave Brolley 2f8b2203e3 2005-10-28 Dave Brolley <brolley@redhat.com>
Contribute the following changes:
        2005-02-16  Dave Brolley  <brolley@redhat.com>

        * cgen-bitset.h: Rename CGEN_ISA_MASK to CGEN_BITSET. Rename
        cgen_isa_mask_* to cgen_bitset_*.
        * cgen.h: Likewise.
2005-10-28 19:38:59 +00:00
Nick Clifton 4aa1b05777 Add support for the Z80 processor family 2005-10-25 17:40:19 +00:00
Jan Beulich 95baaf8819 include/opcode/
2005-10-24  Jan Beulich  <jbeulich@novell.com>

	* ia64.h (enum ia64_opnd): Move memory operand out of set of
	indirect operands.

bfd/
2005-10-24  Jan Beulich  <jbeulich@novell.com>

	* cpu-ia64-opc.c (elf64_ia64_operands): Move memory operand out of
	set of indirect operands.

gas/
2005-10-24  Jan Beulich  <jbeulich@novell.com>

	* config/tc-ia64.c (enum reg_symbol): Delete IND_MEM.
	(dot_rot): Change type of num_* variables. Check for positive count.
	(ia64_optimize_expr): Re-structure.
	(md_operand): Check for general register.

gas/testsuite/
2005-10-24  Jan Beulich  <jbeulich@novell.com>

	* gas/ia64/index.[sl]: New.
	* gas/ia64/rotX.[sl]: New.
	* gas/ia64/ia64.exp: Run new tests.

opcodes/
2005-10-24  Jan Beulich  <jbeulich@novell.com>

	* ia64-asmtab.c: Regenerate.
2005-10-24 07:42:50 +00:00
John David Anglin e68354936d * hppa.h (pa_opcodes): Add two fcmp opcodes. Reorder ftest opcodes.
Add FLAG_STRICT to pa10 ftest opcode.
2005-10-16 20:42:14 +00:00
John David Anglin 0e7712aeeb * gas/hppa/basic/basic.exp (do_system): Adjust for removal of lha
instructions from system.s.
	* gas/hppa/basic/system.s (lha): Remove.

	* hppa.h (pa_opcodes): Remove lha entries.
2005-10-13 02:26:34 +00:00
John David Anglin 6be079435f * config/tc-hppa.c (strict): Don't initialize. Update comment.
(pa_ip): Promote from PA 1.0 to 1.1 immediately when 1.1 match is
	found.  Simplify handling of "ma" and "mb" completers.

	* hppa.h (FLAG_STRICT): Revise comment.
	(pa_opcode): Revise ordering rules.  Add/move strict pa10 variants
	before corresponding pa11 opcodes.  Add strict pa10 register-immediate
	entries for "fdc".
2005-10-08 19:01:29 +00:00
Catherine Moore fd45a7909b * dis-asm.h (print_insn_bfin): Declare.
* elf/bfin.h: New file.
	* elf/common.h (EM_BLACKFIN): Define.
	* opcode/bfin.h: New file.
2005-09-30 15:12:52 +00:00
John David Anglin bcf84bf3aa * hppa.h (pa_opcodes): Add new "fdc" and "fic" opcode entries. 2005-09-25 02:33:54 +00:00
Andreas Schwab b9984de10d Remove extraneous line. 2005-09-08 10:08:34 +00:00
Chao-ying Fu 5843726e51 * mips.h (OP_SH_MT_U, OP_MASK_MT_U, OP_SH_MT_H, OP_MASK_MT_H,
OP_SH_MTACC_T, OP_MASK_MTACC_T, OP_SH_MTACC_D, OP_MASK_MTACC_D): New
define.
Document !, $, *, &, g, +t, +T operand formats for MT instructions.
(INSN_ASE_MASK): Update to include INSN_MT.
(INSN_MT): New define for MT ASE.
2005-09-06 18:42:58 +00:00
Chao-ying Fu 4a8b3ef692 * mips.h (OP_SH_DSPACC, OP_MASK_DSPACC, OP_SH_DSPACC_S,
OP_MASK_DSPACC_S, OP_SH_DSPSFT, OP_MASK_DSPSFT, OP_SH_DSPSFT_7,
OP_MASK_DSPSFT_7, OP_SH_SA3, OP_MASK_SA3, OP_SH_SA4, OP_MASK_SA4,
OP_SH_IMM8, OP_MASK_IMM8, OP_SH_IMM10, OP_MASK_IMM10, OP_SH_WRDSP,
OP_MASK_WRDSP, OP_SH_RDDSP, OP_MASK_RDDSP): New define.
Document 3, 4, 5, 6, 7, 8, 9, 0, :, ', @ operand formats for DSP
instructions.
(INSN_DSP): New define for DSP ASE.
2005-08-25 18:09:24 +00:00
Alan Modra 7cb11b7ad9 Remove a29k files. 2005-08-18 03:59:23 +00:00
Daniel Jacobowitz e357cc5911 gas/
* config/tc-ppc.c (parse_cpu): Add -me300 support.
	(md_show_usage): Likewise.
	* doc/c-ppc.texi (PowerPC-Opts): Document it.
include/opcode/
	* ppc.h (PPC_OPCODE_E300): Define.
opcodes/
	* ppc-dis.c (powerpc_dialect): Handle e300.
	(print_ppc_disassembler_options): Likewise.
	* ppc-opc.c (PPCE300): Define.
	(powerpc_opcodes): Mark icbt as available for the e300.
binutils/
	* doc/binutils.texi (objdump): Document -M e300.
2005-08-15 15:37:15 +00:00
Martin Schwidefsky b527e96688 * s390.h (s390_opcode_cpu_val): Add enum for cpu type z9-109. 2005-08-12 18:02:38 +00:00
John David Anglin 05708eb707 * hppa.h: Update copyright dates. 2005-08-03 15:08:52 +00:00
John David Anglin e61d5b9790 PR gas/336
* hppa.h (pa_opcodes): Allow 0 immediates in PA 2.0 variants of pdtlb
	and pitlb.
2005-07-28 20:32:21 +00:00
Jan Beulich d08916dade include/opcode/
2005-07-27  Jan Beulich  <jbeulich@novell.com>

	* i386.h (i386_optab): Add comment to movd. Use LongMem for all
	movd-s. Add NoRex64 to movq-s dealing only with mmx or xmm registers.
	Add movq-s as 64-bit variants of movd-s.
2005-07-27 07:04:31 +00:00
John David Anglin 2fac58bbaa * hppa.h: Fix punctuation in comment. 2005-07-19 03:09:33 +00:00
John David Anglin 510c28d485 * hppa.h (pa_opcode): Add rules for opcode ordering. Check first for
implicit space-register addressing.  Set space-register bits on opcodes
	using implicit space-register addressing.  Add various missing pa20
	long-immediate opcodes.  Remove various opcodes using implicit 3-bit
	space-register addressing.  Use "fE" instead of "fe" in various
	fstw opcodes.
2005-07-19 00:11:48 +00:00
Jan Beulich 9d219da08a include/opcode/
2005-07-18  Jan Beulich  <jbeulich@novell.com>

	* i386.h (i386_optab): Operands of aam and aad are unsigned.
2005-07-18 06:11:00 +00:00
H.J. Lu f6cab85f3a gas/
2007-07-15  H.J. Lu <hongjiu.lu@intel.com>

	* gas/config/tc-i386.h (CpuVMX): New.
	(CpuUnknownFlags): Add CpuVMX.

gas/testsuite/

2007-07-15  H.J. Lu <hongjiu.lu@intel.com>

	* gas/i386/i386.exp: Add vmx and x86-64-vmx.

	* gas/i386/vmx.d: New file.
	* gas/i386/vmx.s: Likewise.
	* gas/i386/x86-64-vmx.d: Likewise.
	* gas/i386/x86-64-vmx.s: Likewise.

include/opcode/

2007-07-15  H.J. Lu <hongjiu.lu@intel.com>

	* i386.h (i386_optab): Support Intel VMX Instructions.

opcodes/

2007-07-15  H.J. Lu <hongjiu.lu@intel.com>

	* i386-dis.c (OP_VMX): New. Handle Intel VMX Instructions.
	(VMX_Fixup): New. Fix up Intel VMX Instructions.
	(Em): New.
	(Gm): New.
	(VM): New.
	(dis386_twobyte): Updated entries 0x78 and 0x79.
	(twobyte_has_modrm): Likewise.
	(grps): Use OP_VMX in the "sgdtIQ" entry. Updated GRP9.
	(OP_G): Handle m_mode.
2005-07-15 13:49:53 +00:00
John David Anglin 84761d7a22 * hppa.h (pa_opcode): Don't set FLAG_STRICT in pa10 loads and stores. 2005-07-11 02:31:34 +00:00
Jan Beulich 35e456b7f5 gas/
2005-07-05  Jan Beulich  <jbeulich@novell.com>

	* config/tc-i386.h (CpuSVME): New.
	(CpuUnknownFlags): Include CpuSVME.
	* config/tc-i386.c (cpu_arch): Add .pacifica and .svme. Add opteron
	as alias of sledgehammer.
	(md_assemble): Include invlpga in the check for insns with two source
	operands.
	(process_operands): Include SVME insns in the check for ignored
	segment overrides. Adjust diagnostic.
	(i386_index_check): Special-case SVME insns with memory operands.

gas/testsuite/
2005-07-05  Jan Beulich  <jbeulich@novell.com>

	* gas/i386/svme.d: New.
	* gas/i386/svme.s: New.
	* gas/i386/svme64.d: New.
	* gas/i386/i386.exp: Run new tests.

include/opcode/
2005-07-05  Jan Beulich  <jbeulich@novell.com>

	* i386.h (i386_optab): Add new insns.

opcodes/
2005-07-05  Jan Beulich  <jbeulich@novell.com>

	* i386-dis.c (SVME_Fixup): New.
	(grps): Use it for the lidt entry.
	(PNI_Fixup): Call OP_M rather than OP_E.
	(INVLPG_Fixup): Likewise.
2005-07-05 07:16:53 +00:00