Now that we use AC_NO_EXECUTABLES, and we require a recent version of
autoconf, we don't need to define our own copies of these macros. So
switch to the standard AC_PROG_CC.
This allows building the libc & libm pages in parallel, and drops
the duplication in the subdirs with the chew/chapter settings.
The unused rules in Makefile.shared are left in place to minimize
noise in the change.
When using the top-level configure script but subdir Makefiles, the
newlib_basedir value gets a bit out of sync: it's relative to where
configure lives, not where the Makefile lives. Move the abs setting
from the top-level configure script into acinclude.m4 so we can rely
on it being available everywhere. Although this commit doesn't use
it anywhere, just lays the groundwork.
The machine configure scripts are all effectively stub scripts that
pass the higher level options to its own makefile. The only one doing
any custom tests was nds32. The rest were all effectively the same as
the libm/ configure script.
So instead of recursively running configure in all of these subdirs,
generate their makefiles from the top-level configure. For nds32,
deploy a pattern of including subdir logic via m4:
m4_include([machine/nds32/acinclude.m4])
Even its set of checks are very small -- it does 2 preprocessor tests
and sets up 2 makefile conditionals.
Some of the generated machine makefiles have a bunch of extra stuff
added to them, but that's because they were inconsistent in their
configure libtool calls. The top-level has it, so it exports some
new vars to the ones that weren't already.
The machine/{configure,Makefile} files exist only to fan out to the
specific machine/$arch/ subdir. We already have all that same info
in the libm/ dir itself, so by moving the recursive configure and
make calls into it, we can cut off this logic entirely and save the
overhead.
For arches that don't have a machine subdir, it means they can skip
the logic entirely.
This matches what the other GNU toolchain projects have done already.
The generated diff in practice isn't terribly large. This will allow
more use of subdir local.mk includes due to fixes & improvements that
came after the 1.11 release series.
The newlib & libgloss dirs are already generated using autoconf-2.69.
To avoid merging new code and/or accidental regeneration using diff
versions, leverage config/override.m4 to pin to 2.69 exactly. This
matches what gcc/binutils/gdb are already doing.
The README file already says to use autoconf-2.69.
To accomplish this, it's just as simple as adding -I flags to the
top-level config/ dir when running aclocal. This is because the
override.m4 file overrides AC_INIT to first require the specific
autoconf version before calling the real AC_INIT.
Since automake deprecated the INCLUDES name in favor of AM_CPPFLAGS,
change all existing users over. The generated code is the same since
the two variables have been used in the same exact places by design.
There are other cleanups to be done, but lets focus on just renaming
here so we can upgrade to a newer automake version w/out triggering
new warnings.
The 'cygnus' option was removed from automake 1.13 in 2012, so the
presence of this option prevents that or a later version of automake
being used.
A check-list of the effects of '--cygnus' from the automake 1.12
documentation, and steps taken (where possible) to preserve those
effects (See also this thread [1] for discussion on that):
[1] https://lists.gnu.org/archive/html/bug-automake/2012-03/msg00048.html
1. The foreign strictness is implied.
Already present in AM_INIT_AUTOMAKE in newlib/acinclude.m4
2. The options no-installinfo, no-dependencies and no-dist are implied.
Already present in AM_INIT_AUTOMAKE in newlib/acinclude.m4
Future work: Remove no-dependencies and any explicit header dependencies,
and use automatic dependency tracking instead. Are there explicit rules
which are now redundant to removing no-installinfo and no-dist?
3. The macro AM_MAINTAINER_MODE is required.
Already present in newlib/acinclude.m4
Note that maintainer-mode is still disabled by default.
4. Info files are always created in the build directory, and not in the
source directory.
This appears to be an error in the automake documentation describing
'--cygnus' [2]. newlib's info files are generated in the source
directory, and no special steps are needed to keep doing that.
[2] https://lists.gnu.org/archive/html/bug-automake/2012-04/msg00028.html
5. texinfo.tex is not required if a Texinfo source file is specified.
(The assumption is that the file will be supplied, but in a place that
automake cannot find.)
This effect is overriden by an explicit setting of the TEXINFO_TEX
variable (the directory part of which is fed into texi2X via the
TEXINPUTS environment variable).
6. Certain tools will be searched for in the build tree as well as in the
user's PATH. These tools are runtest, expect, makeinfo and texi2dvi.
For obscure automake reasons, this effect of '--cygnus' is not active
for makeinfo in newlib's configury.
However, there appears to be top-level configury which selects in-tree
runtest, expect and makeinfo, if present. So, if that works as it
appears, this effect is preserved. If not, this may cause problem if
anyone is building those tools in-tree.
This effect is not preserved for texi2dvi. This may cause problems if
anyone is building texinfo in-tree.
If needed, explicit checks for those tools looking in places relative to
$(top_srcdir)/../ as well as in PATH could be added.
7. The check target doesn't depend on all.
This effect is not preseved. The check target now depends on the all
target.
This concern seems somewhat academic given the current state of the
testsuite.
Also note that this doesn't touch libgloss.
So far the build mechanism in newlib only allowed to either define
machine-specific headers, or headers shared between all machines.
In some cases, architectures are sufficiently alike to share header
files between them, but not with other architectures. A good example
is ix86 vs. x86_64, which share certain traits with each other, but
not with other architectures.
Introduce a new configure variable called "shared_machine_dir". This
dir can then be used for headers shared between architectures.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Discard QUICKREF sections, rather than writing them to stderr
Discard MATHREF sections, rather than discarding as an error
Pass NOTES sections through to texinfo, rather than discarding as an error
Don't redirect makedoc stderr to .ref file
Remove makedoc output on error
Remove .ref files from CLEANFILES
Regenerate Makefile.ins
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
makedoc defines a command as 'all upper case, and alone on a line'.
A few QUICKREF lines currently violate this by having some additional text after
the QUICKREF.
So, currently, these lines are treated as an unknown command.
This is benign as QUICKREF currently does nothing but produce some ignored
output on stderr. I'm not sure what the intent of QUICKREF is.
2015-11-06 Jon Turney <jon.turney@dronecode.org.uk>
* libm/mathfp/s_acos.c: Fix QUICKREF.
* libm/mathfp/e_acosh.c: Ditto.
* libm/math/w_asin.c: Ditto.
* libm/mathfp/e_acosh.c: Ditto.
* libm/mathfp/s_acos.c: Ditto.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
This got removed everywhere else in commit 139f923b, so I'm assuming whatever
ancient bug this was has been fixed long since.
There are plenty of other uses of texinfo with a filename containing an
underscore now.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
* configure.in: Comment out the --enable-newlib-fp-hw option
as the mathfp library is inaccurate and should not be used.
* Makefile.am: Add comment regarding the mathfp directory.
* configure: Regenerated.
* Makefile.in: Ditto.
* libm/mathfp/README: New file that details why the mathfp
directory is not used.
* libm/mathfp/s_logarithm.c: Fix error introduced by previous
fix when handling negative input values. Make function
consistent with math directory and glibc version such that
inf and nan values return inf and nan respectively with no
errno setting.
* libm/mathfp/sf_logarithm.c: Ditto.
* libm/math/w_log.c: Set errno to ERANGE when input is 0.0.
* libm/math/wf_log.c: Ditto.
* libm/math/w_log10.c: Ditto.
* libm/math/wf_log10.c: Ditto.
* acinclude.m4: Check for readelf tool.
* configure.in: Use ${READELF} instead of hard-coding.
* Regenerate all aclocal.m4, Makefile.in, and configure files.
* Makefile.am (MATHOBJS_IN_LIBC): Add s_isinfd, sf_isinff,
s_isnand, and sf_isnanf object files.
* Makefile.in: Regenerated.
* libc/include/ieeefp.h: Undef isnan and isinf to avoid
conflict if <math.h> has previously been included.
* libc/include/math.h
* libm/common/Makefile.am: Add new s_isinfd, s_isnand, sf_isinff,
and sf_isnanf files. Also support s_isnan, sf_isnan, s_isinf, and
sf_isinf files which have been moved from math/mathfp directories.
* libm/common/Makefile.in: Regenerated.
* libm/common/s_isinfd.c: New file.
* libm/common/s_isnand.c: Ditto.
* libm/common/sf_isinff.c: Ditto.
* libm/common/sf_isnanf.c: Ditto.
* libm/common/s_isinf.c: Moved from libm/math directory.
* libm/common/s_isnan.c: Ditto.
* libm/common/sf_isinf.c: Ditto.
* libm/common/sf_isnan.c: Ditto.
* libm/math/Makefile.am: Remove isinf and isnan family functions
which have been moved into common directory.
* libm/mathfp/Makefile.am: Ditto.
* libm/math/Makefile.in: Regenerated.
* libm/mathfp/Makefile.in: Ditto.
* libm/math/s_isinf.c: Removed.
* libm/math/s_isnan.c: Ditto.
* libm/math/sf_isinf.c: Ditto.
* libm/math/sf_isnan.c: Ditto.
* libm/mathfp/s_isinf.c: Ditto.
* libm/mathfp/s_isnan.c: Ditto.
* libm/mathfp/sf_isinf.c: Ditto.
* libm/mathfp/sf_isnan.c: Ditto.
* libm/mathfp/s_frexp.c: Check for special values on
the original input, not the manipulated output value.
* libm/mathfp/sf_frexp.c: Ditto.
* libm/mathfp/s_atangent.c: Don't use local value branch
when checking for quadrant.
* libm/mathfp/sf_atangent.c: Ditto.
