* fhandler_tty.cc (fhandler_pty_slave::fch_close_handles): Don't close
handles not opened via fhandler_pty_slave::fch_open_handles.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler.h (class fhandler_base): Add virtual function
get_io_handle_cyg() to get handle from which OPOST-processed output is
read on PTY master.
(class fhandler_pty_slave): Add variable output_handle_cyg to store a
handle to which OPOST-processed output is written. Add two functions,
i.e., set_output_handle_cyg() and get_output_handle_cyg(), regarding
variable output_handle_cyg. Now, output_handle is used only by native
windows program. The data before OPOST-processing is written to
output_handle and OPOST-processing is applied in the master-side. For a
cygwin process, OPOST-processing is applied in the slave-side, and the
data after OPOST-processing is written to output_handle_cyg.
(class fhandler_pty_master): Add two variables, i.e., io_handle_cyg and
to_master_cyg, to store handles of a pipe through which OPOST-processed
output passes. Add pty_master_fwd_thread and function
pty_master_fwd_thread() for a thread which applies OPOST-processing
and forwards data from io_handle to to_master_cyg. Add function
get_io_handle_cyg() regarding variable io_handle_cyg. Now, the pipe
between io_handle and to_master are used only by native windows program
for applying OPOST-processing in the master-side. For a cygwin process,
the pipe between io_handle_cyg and to_master_cyg is used for passing
through the data which is applied OPOST-processing in the slave-side.
* fhandler_tty.cc (struct pipe_reply): Add member to_master_cyg.
(fhandler_pty_master::process_slave_output): Read slave output from
io_handle_cyg rather than io_handle.
(fhandler_pty_slave::fhandler_pty_salve): Initialize output_handle_cyg.
(fhandler_pty_slave::open): Set output_handle_cyg by duplicating handle
to_master_cyg on PTY master.
(fhandler_pty_slave::close): Close handle output_handle_cyg.
(fhandler_pty_slave::write): Write data to output_handle_cyg rather
than output_handle.
(fhandler_pty_slave::fch_close_handles): Close handle output_handle_cyg.
(fhandler_pty_master::fhandler_pty_master): Initialize io_handle_cyg,
to_master_cyg and master_fwd_thread.
(fhandler_pty_master::cleanup): Clean up to_master_cyg as well.
(fhandler_pty_master::close): Print to_master_cyg as well in debug
message. Terminate master forwarding thread. Close handles
to_master_cyg and io_handle_cyg.
(fhandler_pty_master::ioctl): Use io_handle_cyg rather than to_master.
(fhandler_pty_master::pty_master_thread): Add code for duplicating
handle to_master_cyg.
(fhandler_pty_master::pty_master_fwd_thread): New function for a thread
to forward OPOST-processed data from io_handle to to_master_cyg. This
thread applies OPOST-processing to the output of native windows program.
(::pty_master_fwd_thread): Ditto.
(fhandler_pty_master::setup): Create a new pipe to pass thruegh OPOST-
processed output. Create new thread to forward data from io_handle to
to_master_cyg. Set handle to_master_cyg to tty. Print io_handle_cyg as
well in debug message. Close handles io_handle_cyg and to_master_cyg in
case of error.
(fhandler_pty_master::fixup_after_fork): Set handle to_master_cyg to
tty. Copy handle to_master_cyg from arch->to_master_cyg.
(fhandler_pty_master::fixup_after_exec): Clean up to_master_cyg.
* select.cc: Check handle returned by get_io_handle_cyg() rather than
get_handle().
* tty.h (class tty): Add variable _to_master_cyg to store a handle to
which OPOST-processed data is written. Add two functions,
to_master_cyg() and set_to_master_cyg(), regarding _to_master_cyg.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* fhandler_tty.cc (fhandler_pty_slave::read): Change calculation of
"readlen" not to use "bytes_in_pipe" value directly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* tty.h (class tty_min): Remove variable "write_error" to which any
errors are not currently set at anywhere.
(class tty): Add variable "column" for handling ONOCR.
* tty.cc (tty::init): Add initialization code for variable "column".
* fhandler.h (class fhandler_pty_master): Remove variable "need_nl"
which is not necessary any more. "need_nl" was needed by OPOST process
in fhandler_pty_master::process_slave_output().
(class fhandler_pty_common): Add function process_opost_output() for
handling post processing for OPOST in write process.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Count
TIOCPKT control byte into length to be read in TIOCPKT mode. Move
post processing for OPOST to write process. Remove code related to
variable "write_error". Return with EIO error if slave is already
closed.
(fhandler_pty_master::fhandler_pty_master): Remove initialization
code for variable "need_nl".
(fhandler_pty_common::process_opost_output): Add this function for
handling of OPOST in write process. Add code to avoid blocking in
non-blocking mode when output is suspended by ^S.
(fhandler_pty_slave::write): Call fhandler_pty_common::
process_opost_output() instead of WriteFile(). Remove code related to
variable "write_error".
(fhandler_pty_master::doecho): Call fhandler_pty_common::
process_opost_output() instead of WriteFile().
* select.cc (peek_pipe): Remove code related to variable "need_nl".
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
(tty::is_master_closed): Drop method.
* fhandler_tty.cc (fhandler_pty_slave::open): Remove code prematurely
bailing out if master control thread is not running.
(fhandler_pty_slave::read): Don't generate SIGHUP if master control
thread is not running.
(fhandler_pty_master::close): Rearrange code to avoid stopping master
control thread twice in multi-threaded scenarios.
(class fhandler_pty_master): Add echo_r and echo_w handles constituting
read and write side of new echo pipe.
* select.cc (peek_pipe): On pty masters, check additionally if input
from the echo pipe is available.
* fhandler_tty.cc (fhandler_pty_master::doecho): Drop output_mutex
locking. Write output to echo pipe.
(fhandler_pty_master::process_slave_output): Check if input is available
in echo pipe and prefer to read from it, if so.
(fhandler_pty_slave::write): Drop output_mutex locking.
(fhandler_pty_master::fhandler_pty_master): Initialize echo pipe
handles to NULL.
(fhandler_pty_master::close): Close and NULL echo pipe handles.
(fhandler_pty_master::setup): Create echo pipe, close in case of error.
written bytes.
* fhandler_termios.cc (fhandler_termios::tcinit): Fix formatting.
(fhandler_termios::line_edit): Return bytes actually written. Write
in 32 byte chunks in non-canonical mode to reduce number of WriteFile
calls. Don't just eat unwritten bytes in case of an error condition.
Especially, don't report them back to the caller as written.
* fhandler_tty.cc (fhandler_pty_slave::read): Disable code reducing
the number of bytes read from the pipe to vmin. Add comment.
(fhandler_pty_master::write): Convert ret to ssize_t type. Just call
line_edit once, not in a loop once for each byte. Return bytes written
as returned by line_edit.
to declaration.
* fhandler_tty.cc (fhandler_pty_slave::fch_open_handles): Add bool
parameter "chown". Only request WRITE_OWNER access when opening pty
synchronization objects if "chown" is set.
(fhandler_pty_slave::fchmod): Call fch_open_handles with new bool
parameter set to false.
(fhandler_pty_slave::fchown): Call fch_open_handles with new bool
parameter set to true.
* kernel32.cc (CreateFileMappingW): Fix default standard rights for
file mappings from READ_CONTROL to STANDARD_RIGHTS_REQUIRED to allow
changing the DACL (fixes "access denied" error in pinfo::set_acl).
* fhandler_disk_file.cc (fhandler_base::fstat_helper): Change debug
output to print mode bits in octal.
* security.cc (alloc_sd): Ditto.
(set_file_attribute): Ditto.
essentially guarded by thread-specific signal_arrived.
* exceptions.cc (_cygtls::handle_SIGCONT): Simplify. Eliminate lock/unlock
since code is guarded by signal_arrived.
INFINITE amount of time. Instead default to 1/10 second.
(fhandler_pty_slave::open): Just default to INFINITE wait rather than
(now) waiting longer than previously.
warnings between regparm definitions and declarations.
* smallprint.cc (__small_vswprintf): Conditionalize declaration and
setting of l_opt for only x86_64.
* spawn.cc (child_info_spawn::worker): Remove unused 'pid' variable.
* thread.cc (verifyable_object_isvalid): Temporarily define as
non-inline with gcc 4.7+, regardless of target.
(mainly in fhandler*) start fixing gcc 4.7.2 mismatch between regparm
definitions and declarations.
* gendef: Define some functions to take @ declaration to accommodate _regN
defines which use __stdcall.
* gentls_offsets: Define __regN macros as empty.
* autoload.cc (wsock_init): Remove unneeded regparm attribute.
* winsup.h (__reg1): Define.
(__reg2): Define.
(__reg3): Define.
* advapi32.cc (DuplicateTokenEx): Coerce some initializers to avoid warnings
from gcc 4.7.2.
* exceptions.cc (status_info): Declare struct to use NTSTATUS.
(cygwin_exception::dump_exception): Coerce e->ExceptionCode to NTSTATUS.
* fhandler_clipboard.cc (cygnativeformat): Redefine as UINT to avoid gcc 4.7.2
warnings.
(fhandler_dev_clipboard::read): Ditto.
handling when stopped by CTRL-S.
* fhandler_tty.cc (bytes_available): Add arguments to debug_only_printf call.
* sigproc.cc (proc_subproc): Simplify some if logic.
output_mutex on CTRL-S/CTRL-Q to avoid a deadlock.
* fhandler_tty.cc (fhandler_pty_slave::write): Loop when output_stopped is
detected before acquiring output_mutex. Acquire output_mutex in the loop for
each write.
* tty.h: Remove some obsolete defines.
(tty_min::output_stopped): Make 'bool'.
* exceptions.cc (sig_handle_tty_stop): Make sure that incyg is cleared when
exiting if we have no parent process. Only wait for signal_arrived.
(sigpacket::process): Make continue_now a bool. Delay sending signal_arrived
until the end. Make code more defensive to avoid calling signal handler when
stopped. Only set signal_arrived when stopped.
* sigproc.cc (sig_hold): Rename from sigCONT. Make static.
(sig_send): Accommodate sigCONT -> sig_hold rename.
(wait_sig): Ditto.
* sigproc.h (sigCONT): Delete declaration.
* fhandler_console.cc (fhandler_console::write): Use new '%0c' facility to
print characters. Change to paranoid to avoid excessive strace output.
* fhandler_tty.cc (fhandler_pty_master::accept_input): Make frequent strace
printf "paranoid" to help cut down on strace output size.
* signal.cc (sigsuspend): Add standard syscall strace output.
(sigpause): Ditto.
(pause): Ditto.
* cygtls.h (_cygtls::reset_signal_arrived): New function.
* cygserver_ipc.h (ipc_set_proc_info): Use _cygtls::ipc_set_proc_info to set
per-thread signal arrived value.
* cygthread.cc (cygthread::detach): Use per-thread signal_arrived via
set_thread_waiting.
* fork.cc (_cygtls::fixup_after_fork): Clear signal_arrived.
(_cygtls::remove): Close any signal_arrived handle when thread exists.
(_cygtls::find_tls): Remove unneeded function.
* cygtls.h: Update copyright.
(class _cygtls): Reorganize to help avoid rebuilding newlib when structure
changes.
(_cygtls::event): Delete.
(_cygtls::threadkill): Ditto.
(_cygtls::signal_waiting): Declare new bool.
(_cygtls::find_tls): Delete declaration.
(_cygtls::set_threadkill): Ditto.
(_cygtls::reset_threadkill): Ditto.
(_cygtls::set_signal_arrived): Declare new function.
(class set_thread_waiting): Declare new class.
* cygwait.cc (cw_nowait_storage): Define.
(cygwait): Set per-thread signal_arrived via set_thread_waiting. Don't
special-case _main_tls.
* cygwait.h (cw_nowait): Define.
(cw_infinite): Ditto.
(cygwait): Redefine pathological wait-only case.
* dcrt0.cc (dll_crt0_0): Remove call to now-defunct events_init().
(dll_crt0_1): Remove call to now-defunct create_signal_arrived().
* exceptions.cc: Reflect set_signal_mask() argument reordering throughout.
Remove signal mask synchronization throughout.
(events_init): Delete definition.
(mask_sync): Delete now-unneeded mask synchronization.
(set_signal_mask): Reverse order of arguments to "standard" to, from layout.
Rename "newmask" argument to "setmask". Remove debugging.
(sig_handle_tty_stop): Use cancelable_wait rather than WFMO.
(_cygtls::interrupt_setup): Don't treat "threadkill" events specially.
Conditionally set signal_arrived depending on whether the thread has created it
or not.
(sigpacket::process): Reorganize to reflect thread-specific sending of signals
which is more in line with the way it was actually supposed to work.
* fhandler_socket.cc (get_inet_addr): Use cancelable_wait rather than
IsEventSignalled to avoid potential race.
(fhandler_socket::wait_for_events): Set signal_arrived event using
set_thread_waiting().
(fhandler_socket::close): Use cygwait for the case of just waiting 10 ms for a
signal.
* fhandler_tape.cc (fhandler_dev_tape::_lock): Use cancelable_wait rather than
WFMO. Redo switch/case tests accordingly.
* fhandler_termios.cc (fhandler_termios::bg_check): Use cygwait for case of
just waiting 0 ms for a potential signal.
* fhandler_tty.cc (fhandler_pty_master::process_slave_output): Use
cancelable_wait rather than WFSO.
* fhandler_windows.cc (fhandler_windows::read): Set per-thread signal_arrived
via set_thread_waiting().
* flock.cc (lf_setlock): Ditto.
* select.cc (pselect): Ditto. Set per-thread signal_arrived using
set_thread_waiting().
* gendef: Don't special case handling of _cygtls::sig for threads.
* gentls_offsets: Use #pragma once in tlsoffsets.h.
* ntdll.h: Use #pragma once.
* poll.cc: Reflect set_signal_mask() argument reordering.
* posix_ipc.cc (ipc_mutex_lock): Use cancelable_wait rather than WFMO.
(ipc_cond_timedwait): Set perl-thread signal arrived using
set_thread_waiting().
* security.h: Use #pragma once.
* signal.cc (abort): Reflect set_signal_mask() argument reordering.
(clock_nanosleep): Ditto. Change call to cancelable_wait to properly specify
handling of cancel and interrupt.
(sigwaitinfo): Remove handling of per-thread event in favor of per-thread
signal_arrived. Use cancelable_wait rather than WFSO.
* sigproc.cc (signal_arrived): Delete definition.
(create_signal_arrived): Ditto.
* sigproc.h (signal_arrived): Delete declaration.
(set_signal_mask): Avoid defining as a "C" function. Don't conditionally
declare.
(create_signal_arrived): Delete declaration.
* syscalls.cc (rename): Use cygwait() rather than WFSO.
* thread.h (fast_mutex::lock): Use cw_infinite rather than LARGE_NULL.
* wait.cc (wait4): Ditto.
* thread.cc (pthread_mutex::lock): Ditto.
(pthread::join): Ditto.
(semaphore::_wait): Ditto.
(pthread_kill): Remove set_threadkill() accommodation.
* tlsoffsets.h: Regenerate.
building against w32api headers.
(RegOpenCurrentUser): Ditto.
* fhandler_tty.cc (GetNamedPipeClientProcessId): Ditto.
* ntdll.h (enum _PROCESSINFOCLASS): Add ProcessImageFileName.
(RtlInitAnsiString): Declare.
(RtlUnicodeStringToAnsiSize): Declare.
* sched.cc (GetForegroundWindow): Ditto.
* sec_helper.cc (SECURITY_NT_NON_UNIQUE): Define as
SECURITY_NT_NON_UNIQUE_RID when building against w32api headers.
(cygsid::get_sid): Use SECURITY_NT_NON_UNIQUE rather than
SECURITY_NT_NON_UNIQUE_RID.
(__sec_user): Use PISECURITY_DESCRIPTOR rather than PSECURITY_DESCRIPTOR
to allow valid pointer arithmetic.
(_recycler_sd): Ditto.
(_everyone_sd): Ditto.
* fhandler_tty.cc (bytes_available): Revert to previous Oct-2011 behavior where
a dummy buffer is used to determine how many bytes will be read.
(fhandler_pty_master::ioctl): Correct coercion in assignment.
specifically called setsid.
* fhandler_tty.cc (fhandler_pty_slave::dup): Ditto. Also add comment
documenting research into rxvt problem.
* fhandler_termios.cc (fhandler_termios::tcsetpgrp): Don't check specifically
for myself->ctty == -1. Test for > 0 as that is the correct test.
(fhandler_termios::sigflush): Ditto.
* cygheap.h (init_cygheap::manage_console_count): Ditto.
(init_cygheap::console_count): Ditto.
* fhandler.h (fhandler_console::has_a): Ditto.
(fhandler_console::free_console): Declare new function.
* fhandler_console.cc (fhandler_console::free_console): Define new function.
(fhandler_console::open_setup): Delete call to manage_console_count.
(fhandler_console::close): Ditto. Replace with call to free_console().
* fhandler_tty.cc (fhandler_pty_slave::open): Delete call to
manage_console_count.
(fhandler_pty_slave::cleanup): Ditto.
(fhandler_pty_slave::close): Call fhandler_console::free_console() if this is
our controlling tty.
* pinfo.cc (_pinfo::set_ctty): Skip function if tty in question == our ctty.
Delete call to manage_console_count.
* syscalls.cc (close_all_files): Avoid locking and avoid setting errno when
iterating over fds.
for stuff".
* fhandler.cc (fhandler_base_overlapped::wait_overlapped): Use simplified arg
form of cygwait.
* fhandler_console.cc (fhandler_console::read): Ditto.
* fhandler_audio.cc (fhandler_dev_dsp::Audio_out::waitforspac): Ditto.
(fhandler_dev_dsp::Audio_in::waitfordata): Ditto.
* fhandler_fifo.cc (fhandler_fifo::wait): Ditto.
* fhandler_serial.cc (fhandler_serial::raw_read): Ditto.
(fhandler_serial::raw_write): Ditto.
* select.cc (cygwin_select): Ditto.
* sigproc.h (cygwait): Rename from cygWFMO. Define two argument and single
argument forms of this function.
* fhandler_tty.cc (fhandler_pty_slave::open): Use method to query if tty is
open.
(fhandler_pty_slave::read): Send SIGHUP when master is detected as closed.
(fhandler_pty_common::close): Close input_available_event in callers since
master may need to signal it first.
(fhandler_pty_master::close): Lie and set input_available_event when closing,
then close input_available_event.
(fhandler_pty_slave::close): Close input_available_event explicitly here.
* tty.h (tty::is_master_closed): Declare new method.
Throughout, change syscalls to report on return values using new %R format
option.
* smallprint.cc (__small_vsprintf): Add parsing for %R to report on return
values and possible errno from syscalls.
* errno.cc (errmap): Add PRIVILEGE_NOT_HELD.
* fhandler_tty.cc (fhandler_pty_master::setup): When creating a thread use
shorter name to reduce debuggging output.
* select.cc (start_thread_pipe): Ditto.
(start_thread_serial): Ditto.
(start_thread_socket): Ditto.
(start_thread_mailslot): Ditto.
* sigproc.cc (talktome): Ditto.
"create_selectable". Change return to DWORD.
(fhandler_pty_common::pipesize): New constant.
* fhandler_fifo.cc (fhandler_fifo::fhandler_fifo): Reflect create_selectable
name change.
* miscfuncs.cc (CreatePipeOverlapped): Ditto.
* pipe.cc (fhandler_pipe::create): Ditto.
(fhandler_pipe::create): Rename from the misnamed "create_selectable". Return
DWORD. Only set pipe size to default when it is passed in as zero.
* fhandler_tty.cc (fhandler_pty_master::setup): Ditto. Use
fhandler_pty_common::pipesize rather than a raw constant.
* tty.cc (tty::not_allocated): Ditto.
* sigproc.cc (sigproc_init): Use create_selectable to create the signal pipe to
get a more appropriate message based pipe.
Corinna Vinschen
Takashi Yano
Christopher Faylor
Yaakov Selkowitz