Per termios, read waits for MIN chars even if the number of requested
bytes is less. This requires to add WaitCommEvent to wait non-busily
for MIN chars prior to calling ReadFile, so, reintroduce it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Sharing the OVERLAPPED struct and event object in there between
read and select calls in the fhandler might have been a nice
optimization way back when, but it is a dangerous, not thread-safe
approach. Fix this by creating per-fhandler, per-call OVERLAPPED
structs and event objects on demand.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- make sure event object is reset
- set read_ready to true if WaitCommEvent returns success
- improve debugging
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
tcsetattr checks if the VTIME and VMIN values changed and only
calls SetCommTimeouts if so. That's a problem if tcsetattr
is supposed to set VTIME and VIMN to 0, because these are the
start values anyway. But this requires to set ReadIntervalTimeout
to MAXDWORD, which just doesn't happen.
Fix this by dropping the over-optimization of checking the old
values before calling SetCommTimeouts,
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
After changing the type of fhandler_serial::vtime_ to cc_t, vtime_
must be stored in 10s of seconds, not in milliseconds.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Get rid of WaitCommEvent and using overlapped_armed to share the
same overlapped operation between read and select. Rather, make
sure to cancel the overlapped IO before leaving any of these functions.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Datatypes were incorrect, especially vmin_ and vtime_.
Change them to cc_t, as in user space.
- Error checking had a gap or two. Debug output used the
wrong formatting.
- Don't use ev member for ClearCommError and WaitCommEvent.
Both returned values are different (error value vs. event
code). The values are not used elsewhere so it doesn't make
sense to store them in the object. Therefore, drop ev member.
- Some variable names were not very helpful. Especially using
n as lpNumberOfBytesTransferred from GetOverlappedResult and
then actually printing it as if it makes sense was quite
puzzeling.
- Rework the loop and the definition of minchars so that it
still makes sense when looping.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- Don't use ev member for ClearCommError and WaitCommEvent.
Both returned values are different (error value vs. event
code). The values are not used elsewhere so it doesn't make
sense to store them in the object.
- Drop local variable ready which is used inconsequentially.
- Since WFSO already waits 10 ms, don't wait again if no char
is in the inbound queue.
- Avoid else if chains.
- Only print one line of debug output on error.
- Drop overlapped_armed < 0 check. This value is only set in
fhandler_serial::raw_read if VTIME > 0, and even then it's only
set to be immediately reset to 0 before calling ReadFile. So
overlapped_armed is never actually < 0 when calling select.
- Fix a screwed up statement order.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Passing a pointer to a local variable to WriteConsoleA is
not actually needed if we're not going to do anything with
what WriteConsoleA would put in there.
For the wpbuf class the pointer argument was made optional,
so it can be just left out; other call places now pass a
NULL pointer instead. The local variables `wn' and `n'
are no unused, so they go away.
Replace direct access to a pair of co-dependent variables
by calls to methods of a class that encapsulates their relation.
Also replace C #define by C++ class constant.
- In xterm compatible mode, "ESC 7" and "ESC 8" do not work properly
in the senario:
1) Execute /bin/ls /bin to fill screen.
2) Sned CSI?1049h to alternate screen.
3) Reduce window size.
4) Send CSI?1049l to resume screen.
5) Send "ESC 7" and "ESC 8".
After sending "ESC 8", the cursor goes to incorrect position. This
patch adds a workaround for this issue.
- This patch fixes the issue that xterm compatible mode for input
is not correctly set/unset in some situation such as:
1) cat is stopped by ctrl-c.
2) The window size is changed in less.
In case 1), request_xterm_mode_input(true) is called in read(),
however, cat is stopped without request_xterm_mode_input(false).
In case 2), less uses longjmp in signal handler, therefore,
corresponding request_xterm_mode_input(false) is not called if
the SIGWINCH signal is sent within read(). With this patch,
InterlockedExchange() is used instead of InterlockedIncrement/
Decrement().
So far ioctl(TIOCINQ) could end up returning -1 with errno set to EINVAL
if a non-zero device error mask has been returned by ClearCommError.
This doesn't reflect Linux behaviour, which always returns the number of
chars in the inbound queue, independent of any I/O error condition.
EINVAL was a pretty weird error code to use in this scenario, too.
Fix this by dropping all checking for device errors in the TIOCINQ
case. Just return the number of chars in the inbound queue.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- This patch makes some detailed behaviour of ESC sequences such as
"CSI Ps L" (IL), "CSI Ps M" (DL) and "ESC M" (RI) in xterm mode
match with real xterm.
fhandler_socket_unix::fixup_after_exec incorrectly calls
fhandler_socket_unix::fixup_after_fork with a NULL parent process
handle. Not only that calling DuplicateHandle with a NULL parent
handle fails, but it's utterly wrong trying to duplicate the handles
at all here.
Rather just set some important values to NULL and reopen the shared
memory region. Create a fixup_helper method to call common code from
fixup_after_fork and fixup_after_exec.
Add comments to other invocations of fixup_after_fork with NULL
handle to mark them as correct this way.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Aligning the stack pointer using an asm statement isn't any longer
supported. gcc-9.2.0 generates the following warning:
init.cc:33:46: error: listing the stack pointer register '%esp'
in a clobber list is deprecated [-Werror=deprecated]
[...]
init.cc:33:46: note: the value of the stack pointer after an
'asm' statement must be the same as it was before the statement
Replace the asm expression with the gcc function attribute
`force_align_arg_pointer'. This aligns the stack exactly as
required.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
reopen_shmem is accidentally called on the parent fhandler
rather than the child fhandler, and it's called too early.
Make sure to call it on the child and only after its shmem_handle
is valid.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- In Win10 upto 1809, xterm compatible mode does not have REP
escape sequence which terminfo declares. This patch adds support
for "CSI Ps b" (REP). With this patch, bvi (binary editor) works
normally in Win10 1809. Also, xterm compatible mode does not have
"CSI Pm `" (HPA), "CSI Pm a" (HPR) and "CSI Ps e" (VPR). However,
they do not appear to be declared by terminfo. Therefore, these
have been pending.
- Cygwin console with xterm compatible mode causes problem reported
in https://www.cygwin.com/ml/cygwin-patches/2020-q1/msg00212.html
if background/foreground colors are set to gray/black respectively
in Win10 1903/1909. This is caused by "CSI Ps L" (IL), "CSI Ps M"
(DL) and "ESC M" (RI) control sequences which are broken. This
patch adds a workaround for the issue.
...from structs used for data exchange between clients and cygserver.
All of the structs have the same size and member offsets, packed or
unpacked. Keeping the packed attribute results in ominous warnings
from gcc-9.2.0:
cygserver.cc:259:10: warning: taking address of packed member of
'client_request_attach_tty::request_attach_tty' may result in an
unaligned pointer value [-Waddress-of-packed-member]
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
gcc-9.2.0 has an execve builtin which uses the nothrow attribute.
This results in an error when aliasing execve to _execve for newlib:
exec.cc:88:23: error: 'int _execve(const char*, char* const*, char*
const*)' specifies less restrictive attribute than its target
'int execve(const char*, char* const*, char* const*)': 'nothrow'
[-Werror=missing-attributes]
88 | EXPORT_ALIAS (execve, _execve) /* For newlib */
Add the -fno-builtin-execve CFLAGS when building exec.o to override
the gcc builtin.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The variable returning the overrun count from the tracker object after
disarming the overrun counter was not correctly initialized. For some
reason this has only been noticed by gcc-9.2.0, not by the formerly used
gcc-7.4.0.
This problem should not have had any runtime impact. The method
timer_tracker::disarm_overrun_event is supposed to be called in
lock-step with timer_tracker::arm_overrun_event, which in turn
results in the variable getting a valid value.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
linux 4.6 x86/cpu: Add advanced power management bits
Bit 11 of CPUID 8000_0007 edx is processor feedback interface.
Bit 12 of CPUID 8000_0007 edx is accumulated power.
Print proper names in /proc/cpuinfo
[missed enabling this 2016 change during previous major cpuinfo update
as no power related changes were made to the Linux files since then]
- Accessing shared_console_info before initialization causes access
violation because it is a NULL pointer. The cause of the problem
reported in https://cygwin.com/ml/cygwin/2020-02/msg00197.html is
this NULL pointer access in request_xterm_mode_output() when it is
called from close(). This patch makes sure that shared_console_info
is not NULL before calling request_xterm_mode_output().
Added in Linux 5.6:
Check FSRM and use REP MOVSB for short copies on systems that have it.
>From the Intel Optimization Reference Manual:
3.7.6.1 Fast Short REP MOVSB
Beginning with processors based on Ice Lake Client microarchitecture,
REP MOVSB performance is enhanced with string lengths up to 128 bytes.
Support for fast-short REP MOVSB is indicated by the CPUID feature flag:
CPUID [EAX=7H, ECX=0H).EDX.FAST_SHORT_REP_MOVSB[bit 4] = 1.
There is no change in the REP STOS performance.
A NUL byte in the output stream got accidentally not handled as IGN char
in xterm console mode. The internal mbtowc conversion doesn't handle
embedded NUL values gracefully, it always stops converting at NUL bytes.
This broke the output of strings with embedded NUL bytes.
Fix this by always skipping IGN chars in the "normal char output loop"
and make sure not to move the cursor one position to the right, as in
legacy console mode.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
NSIG is a deprecated symbol only visible under MISC visibility.
_NSIG is used widely instead, and on most systems NSIG is
defined in terms of _NSIG.
Follow suit: Change NSIG to _NSIG throughout and change visiblity
of NSIG to be defined only in __MISC_VISIBLE case.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- If two cygwin programs are executed simultaneousley with pipes
in cmd.exe, xterm compatible mode is accidentally disabled by
the process which ends first. After that, escape sequences are
not handled correctly in the other app. This is the problem 2
reported in https://cygwin.com/ml/cygwin/2020-02/msg00116.html.
This patch fixes the issue. This patch also fixes the problem 3.
For these issues, the timing of setting and unsetting xterm
compatible mode is changed. For read, xterm compatible mode is
enabled only within read() or select() functions. For write, it
is enabled every time write() is called, and restored on close().
- In push_to_pcon_screenbuffer(), open() and ioctl() are called.
Since push_to_pcon_screenbuffer() is called in read() and write(),
errno which is set in read() and write() code may be overwritten
in open() or ioctl() call. This patch prevent this situation.
- PTY has a bug reported in:
https://cygwin.com/ml/cygwin/2020-02/msg00067.html.
This is the result of state mismatch between real pseudo console
attaching state and state variable. This patch fixes the issue.
- PTY has a problem that the key input, which is typed during
windows native app is running, disappear when it returns to shell.
(Problem 3 in https://cygwin.com/ml/cygwin/2020-02/msg00007.html)
This is beacuse pty has two input pipes, one is for cygwin apps
and the other one is for native windows apps. The key input during
windows native program is running is sent to the second input pipe
while cygwin shell reads input from the first input pipe.
This patch realize transfering input data between these two pipes.
- Debug codes used in the early stage of pseudo console support are
removed. (Regarding ALWAYS_USE_PCON and USE_API_HOOK) Along with
this, the codes related to this change are organized.
- PTY code has a problem that tcsh is terminated if the following
command is executed.
true; chcp &
This seems to be caused by invalid pointer access which occurs
when the process exits during the kill() code is execuetd. This
patch avoids the issue by not using kill().
- With this patch, foreground color and background color are allowed
to be set simultaneously by 24 bit color escape sequence such as
ESC[38;2;0;0;255;48;2;128;128;0m in legacy console mode.
When fhandler_base::fstat_helper is called, the handle h returned by
get_stat_handle() should be pc.handle() and should be safe to use for
getting the file information. Previously, the call to
get_file_attribute() for FIFOs set the first argument to NULL instead
of h, thereby forcing the file to be opened for fetching the security
descriptor in get_file_sd().
Make fhandler_socket_local::dup and fhandler_socket_local::fcntl (a
new method) call fhandler_base::dup and fhandler_base::fcntl if O_PATH
is set.
We're viewing the socket as a disk file here, but there's no need to
implement the actions of fhandler_disk_file::dup and
fhandler_disk_file::fcntl, which do nothing useful in this case beyond
what the fhandler_base methods do. (The extra actions are only useful
when I/O is going to be done on the file.)
If O_PATH is set, then the fhandler_socket_local object has a handle
that can be used for getting the statvfs information. Use it by
calling fhandler_base::fstatvfs_by_handle. Without this change,
fhandler_disk_file::fstatfvs would be called on a new fhandler_disk
object, which would then have to be opened.
If an AF_LOCAL socket is opened with O_PATH, all socket system calls
that take a file descriptor argument fail on the resulting descriptor.
Make sure that errno is set as on Linux for those calls that are
implemented on Linux. In almost all cases it is ENOTSOCK. There are
two exceptions:
- sockatatmark(3); errno is EBADF.
- bindresvport(3); errno is EAFNOSUPPORT if the second argument sin
(of type struct sockaddr_in *) is non-NULL and satisfies
sin->sin_family == AF_INET.
Finally, there are two BSD socket system calls implemented on Cygwin
but not Linux: getpeereid(3) and bindresvport_sa(3). Set errno to
ENOTSOCK for these for consistency with the majority of the other
calls.
If that flag is not set, or if an attempt is made to open a different
type of socket, the errno is now EOPNOTSUPP instead of ENXIO. This is
consistent with POSIX, starting with the 2016 edition. Earlier
editions were silent on this issue.
Opening is done in a (new) fhandler_socket_local::open method by
calling fhandler_base::open_fs.
Also add a corresponding fhandler_socket_local::close method.
This edits licenses held by Berkeley and NetBSD, both of which
have removed the advertising requirement from their licenses.
Signed-off-by: Keith Packard <keithp@keithp.com>
This option has been disabled long ago and nobody missed it.
Removing drops a bit of unneeded code
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If O_PATH is set, then the fhandler_fifo object has a handle that can
be used for getting the statvfs information. Use it by calling
fhandler_base::fstatvfs_by_handle. Before this change,
fhandler_disk_file::fstatfvs was called on a new fhandler_disk_file
object, which would then have to be opened.
Define a new method fhandler_base::fstatvfs_by_handle, extracted from
fhandler_disk_file::fstatvfs, which gets the statvfs information when
a handle is available.
This will be used in future commits for special files that have been
opened with O_PATH.
Treat a special file opened with O_PATH the same as a regular file,
i.e., use its handle to get the stat information.
Before this change, fstat_fs opened the file a second time, with the
wrong flags and without closing the existing handle. A side effect
was to change the openflags of the file, possibly causing further
system calls to fail.
Currently this change only affects FIFOs, but it will affect
AF_LOCAL/AF_UNIX sockets too once they support O_PATH.
mknod32 actually creates a path_conv, just to call mknod_worker
with a win32 path. This doesn't only require to create path_conv
twice, it also breaks permissions on filesystems supporting ACLs.
Fix this by passing the path_conv created in the caller down to
symlink_worker. Also, while at it, simplify the handling of trailing
slashes and move it out of symlink_worker. Especially use the
new PC_SYM_NOFOLLOW_DIR flag to avoid fiddeling with creating
a new path copy without the trailing slash.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Usually a trailing slash requires to follow an existing symlink,
even with PC_SYM_NOFOLLOW. The reason is that "foo/" is equivalent
to "foo/." so the symlink is in fact not the last path component,
"." is. This is default for almost all scenarios.
PC_SYM_NOFOLLOW_DIR now allows the caller to request not to
follow the symlink even if a trailing slash is given. This can
be used in callers to perform certain functions Linux-compatible.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- After commit 6cc299f0e2, outputs of
cygwin programs which call both printf() and WriteConsole() are
frequently distorted. This patch fixes the issue.
- The cause of the problem reported in
https://www.cygwin.com/ml/cygwin/2020-01/msg00220.html is that the
chars input before dup() cannot be read from the new file descriptor.
This is because the readahead buffer (rabuf) in the console is newly
created by dup(), and does not inherit from the parent. This patch
fixes the issue.
If the O_PATH flag is set, fhandler_fifo::open now simply calls
fhandler_base::open_fs.
The previous attempt to handle O_PATH in commit aa55d22c, "Cygwin:
honor the O_PATH flag when opening a FIFO", fixed a hang but otherwise
didn't do anything useful.
If O_PATH is set in the flags argument of
fhandler_base::device_access_denied, return false. No
read/write/execute access should be required in this case.
Previously, the call to device_access_denied in open(2) would lead to
an attempt to open the file with read access even if the O_PATH flag
was set.
rdpru flag is cpuid xfn 80000008 ebx bit 4 added in linux 5.5;
see AMD64 Architecture Programmer's Manual Volume 3:
General-Purpose and System Instructions
https://www.amd.com/system/files/TechDocs/24594.pdf#page=329
and elsewhere in that document
- For programs which does not work properly with pseudo console,
disable_pcon in environment CYGWIN is introduced. If disable_pcon
is set, pseudo console support is disabled.
- For programs compiled with -mwindows option, reopening slave is
needed in push_to_pcon_screenbuffer(), however, it was not at
appropriate place. This causes the problem reported in
https://www.cygwin.com/ml/cygwin/2020-01/msg00161.html. This
patch fixes the issue.
- Though this rarely happens, sometimes the first printing of non-
cygwin process does not displayed correctly. To fix this issue,
the code for waiting for forwarding by master_fwd_thread is revised.
Following Linux, allow the pathname argument to be an empty string if
the AT_EMPTY_PATH flag is specified. In this case the dirfd argument
can refer to any type of file, not just a directory, and the call
operates on that file. In particular, dirfd can refer to a symlink
that was opened with O_PATH | O_NOFOLLOW.
Following Linux, allow the pathname argument to be an empty string,
provided the dirfd argument refers to a symlink opened with
O_PATH | O_NOFOLLOW. The readlinkat call then operates on that
symlink.
Corinna Vinschen
Åke Rehnman
Takashi Yano via Cygwin-patches
Takashi Yano
Hans-Bernhard Broeker
Brian Inglis
Ken Brown
Keith Packard