* fhandler_disk_file.cc (fhandler_base::fstat_helper): Always check
executable suffix to get x-bits for .exe files also in notexec case.
Always reopen file when checking for file header.
* ntdll.h (wait_pending): Delete.
* path.cc (symlink_info::check_shortcut): Drop call to wait_pending
since file is always opened for sync IO.
(symlink_info::check_sysfile): Ditto.
(MIN_STAT_ACCESS): Remove.
(FULL_STAT_ACCESS): Remove.
(symlink_info::check): Drop access flag. Revert to open file with
just read attributes access. Reorder symlink check to check for
reparse points first. Don't check reparse points for anything else,
even on remote drives. Open file for GENERIC_READ when trying to
read shortcuts or system-bit symlinks. Accommodate dropped access
flag in call to path_conv_handle::set.
* path.h (class path_conv_handle): Drop access flag and accommodate
all related methods.
access mask is correct.
(ipc_cond_init): Take additional parameter to differ between send and
receive event. Call NtCreateEvent to make sure the access mask is
correct.
(ipc_cond_timedwait): Reset Event prior to calling WFMO.
(struct mq_info): Split mqi_wait into two events, mqi_waitsend and
mqi_waitrecv.
(mq_open): Calloc mqinfo. Create mqi_waitsend and mqi_waitrecv events.
Make sure all synchronization objects are closed in case of an error.
(_mq_send): Wait for mqi_waitsend event. Signal mqi_waitrecv event.
(_mq_receive): Wait for mqi_waitrecv event. Signal mqi_waitsend event.
(mq_close): Close mqi_waitsend and mqi_waitrecv events.
Just call nfs_fetch_fattr3 if called via fstat.
* nfs.cc (nfs_fetch_fattr3): New function to fetch NFS fattr3 info from
file handle.
* nfs.h (nfs_fetch_fattr3): Declare.
* path.cc (symlink_info::check): Simplify NFS case. Just call
nfs_fetch_fattr3.
/:
PR bootstrap/45326
PR bootstrap/45174
* configure.ac: Honor initial values of $build_configargs,
$host_configargs, $target_configargs. Mark the precious, so
environment settings get recorded.
* configure: Regenerate.
/:
Sync from GCC:
2010-09-30 Michael Eager <eager@eagercon.com>
* configure.ac (microblaze): Add target-libssp to noconfigdirs.
* configure: Regenerate.
2010-09-21 Iain Sandoe <iains@gcc.gnu.org>
* configure.ac (enable-lto): Add Darwin to the list of supported lto
targets and amend comment.
* configure: Regenerate.
2010-09-03 Jack Howarth <howarth@bromo.med.uc.edu>
* configure.ac: Enable LTO by default on Darwin.
* configure: Regenerate.
2010-07-23 Marc Glisse <marc.glisse@normalesup.org>
PR bootstrap/44455
* configure.ac (extra_mpfr_configure_flags): Copy from
extra_mpc_gmp_configure_flags.
* configure: Re-generated.
config/:
Sync from GCC:
2010-09-10 Jonathan Yong <jon_y@users.sourceforge.net>
* dfp.m4: Enable decimal float for i?86 cygwin
and mingw, and for x86_64 mingw.
* fhandler_disk_file.cc: Ditto.
(fhandler_base::fstat_by_nfs_ea): Use fattr3 from path_conv member,
unless called from fstat.
* path.cc: Drop including nfs.h.
(symlink_info::check): Rearrange definition of file info buffers.
Fetch fattr3 info for files on NFS and store in conv_hdl for later
use in fhandler_base::fstat_by_nfs_ea. Use fattr3 file type to
recognize symlink on NFS and try to fetch symlink target only for
actual symlinks.
* path.h: Include nfs.h.
(class path_conv_handle): Change file info storage to union of
FILE_NETWORK_OPEN_INFORMATION and fattr3 structures.
(path_conv_handle::fnoi): Align to aforementioned change.
(path_conv_handle::nfsattr): New method.
(path_conv::nfsattr): New method.
potentially set pgid since it is smarter about deciding if a process is in the
background.
* include/sys/cygwin.h (PID_ORPHANED): Actually delete as planned.
(PID_NOTCYGWIN): Correctly define.
* autoload.cc: Add all advapi32 entry points.
* mount.cc (mount_info::init): Read user fstab only if we have a
username.
* passwd.cc (pwdgrp::read_passwd): Only use username if we have one.
* shared.cc (user_info::initialize): Set cb last so as not to override
planned behaviour in pwdgrp::read_passwd.
* uinfo.cc (cygheap_user::init): Fetch Windows username from environment
variable $USERNAME. Don't set name in cygheap if variable is empty.
(internal_getlogin): If we still have no username, try GetUserNameW.
condition. Fix comment about availability. Move remaining comment to
the right spot. Drop has_ip_helper_lib condition.
* net.cc (cygwin_setsockopt): Drop has_disabled_user_tos_setting
condition. Fix comment.
(get_2k_ifs): Fix comment.
(get_nt_ifs): Remove.
(getifaddrs): Drop call to get_nt_ifs.
(get_ifconf): Ditto.
* wincap.cc: Throughout, drop has_ip_helper_lib,
has_disabled_user_tos_setting, and has_exclusiveaddruse settings from
wincaps.
(wincap_unknown): Remove.
(wincap_nt4): Remove.
(wincap_minimal): New macro, set to wincap_nt4sp4 for now.
(wincapc::init): Drop test for pre-SP4 NT4. Just imply at least NT SP4.
Replace references to wincap_unknown with references to wincap_minimal.
* wincap.h (struct wincaps): Drop has_ip_helper_lib,
has_disabled_user_tos_setting, and has_exclusiveaddruse flags and
methods.
and function name. Make functions which are available on all supported
systems non-optional. Fix return value on entry points imported from
secur32.dll. Add comment.
(std_dll_init): Call fesetenv unconditionally.
* fhandler_disk_file.cc (fhandler_disk_file::facl): Handle ENOSYS and
point to the explanation.
* ntdll.h (STATUS_NOT_IMPLEMENTED): Define.
* path.cc (symlink_info::check): Handle the inability of NT4 to use
FileNetworkOpenInformation on share root dirs in either direction.
* path.h (slash_unc_prefix_p): Remove unused declaration.
* security.cc (get_info_from_sd): Handle ENOSYS from get_file_sd.
Explain when this happens.
* gas/config/tc-arm.c (arm_ext_virt): New variable.
(arm_reg_type): Add REG_TYPE_RNB for banked registers.
(reg_entry): Allow registers to be larger than a byte.
(reg_alias): Fix type warning.
(parse_operands): Parse banked registers when appropriate.
(do_mrs): Add support for Virtualization Extensions.
(do_hvc): New function.
(do_t_mrs): Add support for Virtualization Extensions.
(do_t_msr): Likewise.
(do_t_hvc): New function.
(SPLRBANK): New define.
(reg_names): Add banked registers.
(insns): Add support for Virtualization Extensions.
(md_apply_fixup): Likewise.
(arm_cpus): -mcpu=cortex-a15 implies the Virtualization Extensions.
(arm_extensions): Add 'virt' extension.
(aeabi_set_public_attributes): Add support for Virtualization
Extensions.
* gas/doc/c-arm.texi: Document 'virt' extension.
* gas/testsuite/gas/arm/armv7-a+virt.d: New test.
* gas/testsuite/gas/arm/armv7-a+virt.s: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Virtualization Extensions.
* gas/testsuite/gas/arm/attr-march-armv7-a+sec+virt.d: New test.
* gas/testsuite/gas/arm/attr-march-armv7-a+virt.d: Likewise.
* include/opcode/arm.h (ARM_EXT_VIRT): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC): Rename...
(ARM_ARCH_V7A_IDIV_MP_SEC_VIRT): ...to this and include Virtualization
Extensions.
* opcodes/arm-dis.c (arm_opcodes): Add Virtualiztion Extensions support.
(thumb32_opcodes): Likewise.
(banked_regname): New function.
(print_insn_arm): Add Virtualization Extensions support.
(print_insn_thumb32): Likewise.
(do_div): New function.
(insns): Accept UDIV and SDIV in ARM state.
(arm_cpus): The cortex-a15 option has all current v7-A extensions.
(arm_extensions): Add 'idiv' extension.
(aeabi_set_public_attributes): Update Tag_DIV_use values for the
Integer Divide extension.
* gas/doc/c-arm.texi: Document the idiv extension.
* gas/testsuite/gas/arm/armv7-a+idiv.d: New test.
* gas/testsuite/gas/arm/armv7-a+idiv.s: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Integer divide extension.
* gas/testsuite/gas/arm/attr-march-armv7-a+idiv.d: New test.
* include/opcode/arm.h (ARM_AEXT_ADIV): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC): Likewise.
* opcodes/arm-dis.c (arm_opcodes): Support disassembly of UDIV and SDIV in
ARM state.
(arm_ext_m): Add support for OS extension.
(arm_ext_os): New variable.
(do_t_swi): In v6-M ensure we have the OS extension.
(arm_cpus): The cortex-m1 and cortex-m0 options have the OS
extension by default.
(arm_archs): Add armv6s-m.
(arm_extensions): Add 'os' extension.
(cpu_arch_ver): Add support for v6S-M.
* gas/doc/c-arm.texi: Document the OS Extension, and v6-m and v6s-m
architecture options.
* gas/testsuite/gas/arm/archv6s-m-bad.d: New test.
* gas/testsuite/gas/arm/archv6s-m-bad.l: Likewise.
* gas/testsuite/gas/arm/archv6s-m.d: Likewise.
* gas/testsuite/gas/arm/archv6s-m.s: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6-m+os.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6s-m.d: Likewise.
* include/opcode/arm.h (ARM_EXT_OS): New define.
(ARM_AEXT_V6SM): Likewise.
(ARM_ARCH_V6SM): Likewise.
The disassembler has partial (but incomplete/broken) support already for
the pseudo debug insn OUTC, so let's fix it up and finish it. And now
that the disassembler can handle it, make sure our assembler can output
it too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* libc/minires.c (res_nsend): Use the Windows resolver if appropriate.
(dn_expand): Only set errno in case of error. Delete old comments.
(dn_skipname): Fix typo in comment.