- With the gzll kernel we have two different loading options:
- If the image is loaded to the global memory, the bootstrapping
loads the kernel to local memory. Applications are loaded on
demand. The heap then starts right after bss.
- If the image is pre-loaded to the local memory it includes the
application binaries right after bss. The heap then starts after
the application objects.
- We can check if this is a gzll kernel as it has the string "gzll" at
0x2000. At 0x200c we then find the end of the application objects in
the image. If there is no global memory we set _or1k_heap_start to
this value.
* or1k/boards/optimsoc.S: Heap for gzll kernel
- Previously the heap started right after the bss section. This can now
be configured by changing the _or1k_heap_start symbol that defaults to
the old value (&end). In board_init_early, we can now set this to
another value.
* or1k/sbrk.c: Allow for different heap start
- Store the exception program counter (from EPCR) and exception status
register (from ESR) also during the exception. A runtime system may
replace them thereby to implement a thread switch.
* or1k/exception-asm.S: Store missing state
- We do not need a red zone here, as we do not operate on the current
stack, but always use the clear exception stack. Also reserve two
extra words for the context to store EPCR and ESR.
* or1k/crt0.S: Fix exception stack frame
* or1k/exception-asm.S: ditto
- During interrupt handling the PICSR, table pointers and current
interrupt line have been saved in incorrect registers and/or stored on
the stack.
- Save the pointer in r16/r18, PICSR in r20 and the current interrupt
line in r22. Those are callee-saved registers, so that the register
values will be preserved.
* or1k/interruts-asm.S: Change registers to callee-saved.
* msp430/msp430-sim.ld (.stack): Add an assertion to make sure
that the data area does not overrun the stack. PROVIDE a new
symbol __stack_size to allow the user to set the limit.
* msp430/msp430xl-sim.ld (.stack): Likewise.
* rl78/rl78-sim.ld (.stack): Likewise.
* rl78/rl78.ld (.stack): Likewise.
* rx/rx-sim.ld (.stack): Likewise.
* rx/rx.ld (.stack): Likewise.
* msp430/msp430.ld: Delete.
* msp430/msp430F5438A-l.ld: Delete.
* msp430/msp430F5438A-s.ld: Delete.
* msp430/crt_movedata.S: Delete.
* msp430/Makefile.in (SCRIPTS): Remove msp430.ld.
(CRT_OBJS): Add crt_move_highdata.o.
* msp430/memmodel.h (START_CRT_FUNC): New macro.
(END_CRT_FUNC): New macro.
(WEAK_DEF): New macro.
* msp430/crt0.S: Use new macros.
(move_highdata): New code to initialise the .data section if it is
held in high memory.
* msp430/msp430-sim.ld (.data): Add .either.data.
(.rodata2): Move some read-only data sections here.
(.text): Add .either.text.
(.rodata): Add .either.rodata.
(.bss): Add .either.bss.
* msp430/msp430xl-sim.ld (MEMORY): Add HIROM.
(.rodata2): Move some read-only data sections here.
(.upper.data): New section. Include notes about how to initialise
it.
- With the gzll kernel we have two different loading options:
- If the image is loaded to the global memory, the bootstrapping
loads the kernel to local memory. Applications are loaded on
demand. The heap then starts right after bss.
- If the image is pre-loaded to the local memory it includes the
application binaries right after bss. The heap then starts after
the application objects.
- We can check if this is a gzll kernel as it has the string "gzll" at
0x2000. At 0x200c we then find the end of the application objects in
the image. If there is no global memory we set _or1k_heap_start to
this value.
* or1k/boards/optimsoc.S: Heap for gzll kernel
- Previously the heap started right after the bss section. This can now
be configured by changing the _or1k_heap_start symbol that defaults to
the old value (&end). In board_init_early, we can now set this to
another value.
* or1k/sbrk.c: Allow for different heap start
- Store the exception program counter (from EPCR) and exception status
register (from ESR) also during the exception. A runtime system may
replace them thereby to implement a thread switch.
* or1k/exception-asm.S: Store missing state
- We do not need a red zone here, as we do not operate on the current
stack, but always use the clear exception stack. Also reserve two
extra words for the context to store EPCR and ESR.
* or1k/crt0.S: Fix exception stack frame
* or1k/exception-asm.S: ditto
- During interrupt handling the PICSR, table pointers and current
interrupt line have been saved in incorrect registers and/or stored on
the stack.
- Save the pointer in r16/r18, PICSR in r20 and the current interrupt
line in r22. Those are callee-saved registers, so that the register
values will be preserved.
* or1k/interruts-asm.S: Change registers to callee-saved.
* msp430/msp430-sim.ld (.stack): Add an assertion to make sure
that the data area does not overrun the stack. PROVIDE a new
symbol __stack_size to allow the user to set the limit.
* msp430/msp430xl-sim.ld (.stack): Likewise.
* rl78/rl78-sim.ld (.stack): Likewise.
* rl78/rl78.ld (.stack): Likewise.
* rx/rx-sim.ld (.stack): Likewise.
* rx/rx.ld (.stack): Likewise.
* msp430/msp430.ld: Delete.
* msp430/msp430F5438A-l.ld: Delete.
* msp430/msp430F5438A-s.ld: Delete.
* msp430/crt_movedata.S: Delete.
* msp430/Makefile.in (SCRIPTS): Remove msp430.ld.
(CRT_OBJS): Add crt_move_highdata.o.
* msp430/memmodel.h (START_CRT_FUNC): New macro.
(END_CRT_FUNC): New macro.
(WEAK_DEF): New macro.
* msp430/crt0.S: Use new macros.
(move_highdata): New code to initialise the .data section if it is
held in high memory.
* msp430/msp430-sim.ld (.data): Add .either.data.
(.rodata2): Move some read-only data sections here.
(.text): Add .either.text.
(.rodata): Add .either.rodata.
(.bss): Add .either.bss.
* msp430/msp430xl-sim.ld (MEMORY): Add HIROM.
(.rodata2): Move some read-only data sections here.
(.upper.data): New section. Include notes about how to initialise
it.
* libc/include/sys/config.h: Move evaluation of _UINTPTR_EQ_ULONG and
_UINTPTR_EQ_ULONGLONG from here...
* libc/include/sys/_intsup.h: ...to here. Rename to _INTPTR_EQ_LONG
and _INTPTR_EQ_LONGLONG to refer to signed base type. Add test for
base type of int32_t and set _INT32_EQ_LONG accordingly.
* libc/include/stdint.h: Change checks for __have_long32 to checks
for _INT32_EQ_LONG.
* libc/include/inttypes.h: Ditto. Accommodate aforementioned name
change.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* libc/include/sys/config.h: Move evaluation of _UINTPTR_EQ_ULONG and
_UINTPTR_EQ_ULONGLONG from here...
* libc/include/sys/_intsup.h: ...to here. Rename to _INTPTR_EQ_LONG
and _INTPTR_EQ_LONGLONG to refer to signed base type. Add test for
base type of int32_t and set _INT32_EQ_LONG accordingly.
* libc/include/stdint.h: Change checks for __have_long32 to checks
for _INT32_EQ_LONG.
* libc/include/inttypes.h: Ditto. Accommodate aforementioned name
change.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen
Corinna Vinschen
Takashi Yano
David Stacey
DJ Delorie
Jeff Johnston
Nick Clifton
Yaakov Selkowitz
Mike DePaulo