devbufalign.
(class fhandler_dev_floppy): Remove member bytes_per_sector;
* fhandler_floppy.cc (bytes_per_sector): Define as devbufalign.
(fhandler_dev_floppy::open): Set devbufalign to a multiple of the
sector size and handle devbuf allocation and alignment in !O_DIRECT
case here. Change comment accordingly.
Call FSCTL_ALLOW_EXTENDED_DASD_IO for partitions as well.
(fhandler_dev_floppy::raw_write): Fix comment. Rewrite and fix
writing behaviour when application uses read and lseek.
(fhandler_dev_floppy::lseek): Use rounddown macro. Call
SetFilePointerEx rather than the old SetFilePointer.
(fhandler_dev_floppy::ioctl): Reformat switch. Call
IOCTL_DISK_UPDATE_PROPERTIES rather than IOCTL_DISK_UPDATE_DRIVE_SIZE
in BLKRRPART case. Support BLKIOMIN, BLKIOOPT, BLKPBSZGET and
BLKALIGNOFF.
* fhandler_raw.cc (fhandler_dev_raw::fhandler_dev_raw): Initialize
all devbuf-related members.
(fhandler_dev_raw::~fhandler_dev_raw): Delete devbufalloc rather than
devbuf.
(fhandler_dev_raw::open): Drop allocating devbuf.
(fhandler_dev_raw::dup): Allocate devbufalloc and set devbuf to support
new sector-aligned devbuf handling.
(fhandler_dev_raw::fixup_after_exec): Ditto.
* fhandler_tape.cc (fhandler_dev_tape::open): Ditto, set devbufalign
to 1.
* include/cygwin/fs.h (BLKIOMIN): Define.
(BLKIOOPT): Define.
(BLKALIGNOFF): Define.
(BLKPBSZGET): Define.
output_mutex on CTRL-S/CTRL-Q to avoid a deadlock.
* fhandler_tty.cc (fhandler_pty_slave::write): Loop when output_stopped is
detected before acquiring output_mutex. Acquire output_mutex in the loop for
each write.
* tty.h: Remove some obsolete defines.
(tty_min::output_stopped): Make 'bool'.
From: David Holsgrove <david.holsgrove@xilinx.com>
Adds microblaze little endian support.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
when WRDE_DOOFFS is in use. Restructure the code so that the memory
needed to be freed is instead kept in an internal linked list...
* libc/posix/wordexp2.h: ...as defined here...
* libc/posix/wordexp.c (wordexp): ...and build this internal
linked list here, avoiding wasteful strdup calls in the process.
* config/tc-s390.c (s390_parse_cpu): Add new option zEC12.
* doc/as.texinfo: Document new option zEC12.
* doc/c-s390.texi: Likewise.
2012-10-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/s390.exp: Run zEC12 tests.
* gas/s390/zarch-zEC12.d: New file.
* gas/s390/zarch-zEC12.s: New file.
2012-10-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-mkopc.c: Support new option zEC12.
* s390-opc.c: Add new instruction formats.
* s390-opc.txt: Add new instructions for zEC12.
2012-10-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390.h (s390_opcode_cpu_val): Add S390_OPCODE_ZEC12.
macros, to avoid dependence on the line separation character.
* rl78/crt0.S (_interrupt_vector_table): Convert from CPP macros
to GAS macros, to avoid dependence on the line separation
character.
array of undefined size, to avoid problems when compiled with
-msda=4.
* v850/sbrk.c (_sbrk): Change heap_start to be an array of
undefined size, to avoid problems when compiled with -msda=4.
Merge upstream change.
* libtool.m4 (_LT_COMPILER_PIC): Add -fPIC to GCC and GXX for AIX.
* configure.ac: Add target-libquadmath to noconfigdirs for AIX.
Add libgomp*.o to compare_exclusions for AIX.
* configure: Regenerate.
there is an error inserting hardware breakpoints and use the
error message from the target.
* gdb/breakpoint.c (insert_bp_location, insert_breakpoint_locations):
Catch this exception and print the error message contained within. Do not
print the default hardware error breakpoint message in this case.
bfd/
* bfd-in2.h: Regenerated.
* elf64-aarch64.c
(elf64_aarch64_howto_table): Add R_AARCH64_GOT_LD_PREL19 reloc to HOWTO.
(elf64_aarch64_reloc_map): Add reloc entry.
(aarch64_resolve_relocation): Likewise.
(bfd_elf_aarch64_put_addend): Likewise.
(aarch64_reloc_got_type): Likewise.
(elf64_aarch64_final_link_relocate): Likewise.
(lf64_aarch64_check_relocs): Likewise.
(elf64_aarch64_check_relocs): New case for R_AARCH64_ADR_PREL_LO21
reloc.
* libbfd.h: Regenerated.
* reloc.c (R_AARCH64_GOT_LD_PREL19): New reloc.
gas/
* config/tc-aarch64.c
(reloc_table): Add reloc to table entry.
(parse_address_main): Add support for #:<reloc_op>:<symbol>.
(parse_operands): Check for unused reloc.
(md_apply_fix): New case for reloc.
(aarch64_force_relocation): Likewise.
gas/testsuite
* gas/aarch64/reloc-insn.d
(BFD_RELOC_AARCH64_GOT_LD_PREL19): Add expected asm for new reloc test.
* gas/aarch64/reloc-insn.s
(BFD_RELOC_AARCH64_GOT_LD_PREL19): Add test for reloc.
include/
* elf/aarch64.h (R_AARCH64_GOT_LD_PREL19): New reloc.
ld/testsuite
* ld-aarch64/aarch64-elf.exp: New reloc tests.
* ld-aarch64/emit-relocs-309-low-bad.d: New file. Expected asm for test
failure (lower bound overflow).
* ld-aarch64/emit-relocs-309-low.d: New file. Expected asm for test
success (lower bound).
* ld-aarch64/emit-relocs-309-up-bad.d: New file. Expected asm for test
failure (upper bound overflow).
* ld-aarch64/emit-relocs-309-up.d: New file. Expected asm for test
success (upper bound).
* ld-aarch64/emit-relocs-309.s: New file. Asm for new reloc tests.
bfd/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* cpu-ia64-opc.c (ins_cnt6a): New function.
(ext_cnt6a): Ditto.
(ins_strd5b): Ditto.
(ext_strd5b): Ditto.
(elf64_ia64_operands): Add new operand types.
gas/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* config/tc-ia64.c (reg_symbol): Add a new register.
(indirect_reg): Ditto.
(pseudo_func): Add new symbolic constants.
(operand_match): Add new operand types recognition.
(operand_insn): Add new register recognition.
(md_begin): Add new register definition.
(specify_resource): Add new register recognition.
gas/testsuite/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* gas/testsuite/gas/ia64/psn.d: New file.
* gas/testsuite/gas/ia64/psn.s: New file.
* gas/testsuite/gas/ia64/ia64.exp: Add new testcase.
* gas/testsuite/gas/ia64/opc-i.d: Fixed failing tests.
* gas/testsuite/gas/ia64/opc-m.d: Ditto.
include/opcode/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* ia64.h (ia64_opnd): Add new operand types.
opcodes/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* ia64-asmtab.h (completer_index): Extend bitfield to full uint.
* ia64-gen.c: Promote completer index type to longlong.
(irf_operand): Add new register recognition.
(in_iclass_mov_x): Add an entry for the new mov_* instruction type.
(lookup_specifier): Add new resource recognition.
(insert_bit_table_ent): Relax abort condition according to the
changed completer index type.
(print_dis_table): Fix printf format for completer index.
* ia64-ic.tbl: Add a new instruction class.
* ia64-opc-i.c (ia64_opcodes_i): Define new I-instructions.
* ia64-opc-m.c (ia64_opcodes_m): Define new M-instructions.
* ia64-opc.h: Define short names for new operand types.
* ia64-raw.tbl: Add new RAW resource for DAHR register.
* ia64-waw.tbl: Add new WAW resource for DAHR register.
* ia64-asmtab.c: Regenerate.