* fhandler.h (select_record::thread_errno): Save any encountered errno here.
(select_record::set_select_errno): New function.
(select_record::saw_error): New function.
(select_record::select_record): Initialize thread_errno to zero.
* select.cc (set_handle_or_return_if_not_open): Set thread_errno on failure.
(select_stuff::wait): Record errno for later resurrection in calling thread.
(peek_serial): Ditto.
(pinfo::exit): Move here from _pinfo::exit.
* sigproc.cc (child_info::sync): Use new function to set exitcode and
process_state.
* pinfo.cc (_pinfo::exit): Ditto.
(proc_waiter): Ditto.
(_pinfo::set_exit_state): Define new function.
(_pinfo::dup_proc_pipe): Close handle when there is no parent process around to
care about the exit value.
* dcrt0.cc (dll_crt0_0): Move subproc_ready synchronization later to make sure
that myself is still mapped in parent.
(do_exit): Reflect movement to pinfo::exit.
(__api_fatal): Ditto.
* exceptions.cc (signal_exit): Ditto.
* errno.cc (errmap): Map PROC_NOT_FOUND.
* init.cc (dll_entry): Release myself before exiting.
* sigproc.cc (proc_can_be_signalled): Set errno appropriately.
(sig_send): Ditto. Also remove ill-advised test for !myself->sendsig since
this is an indication of a process which is still initializating -- it is not
an error.
(child_info::sync): Don't set exitcode here. Assume that will happen in
proc_waiter, if necessary.
* spawn.cc (spawn_guts): Delay "wait_for_myself" logic until later. Don't wait
at all if the process has already exited. Reflect movement to pinfo::exit.
(cygthread::cygthread): Ditto.
(cygthread::terminate_thread): Ditto. Move inuse test earlier or suffer
infinite loop.
* pinfo.cc (_pinfo::dup_proc_pipe): Close handle if DuplicateHandle fails and
process no longer exists.
* spawn.cc (spawn_guts): Create process in suspended state if OS demands it.
* wincap.cc: Add "start_proc_suspended" throughout.
* wincap.h (wincaps): Ditto.
(wincapc): Ditto.
* pinfo.cc (pinfo::init): Initialize exitcode to unset state rather than
SIGTERM.
(proc_waiter): Detect if exit code is unset and use status from
GetExitCodeProcess.
* sigproc.cc (child_info::sync): Remove exit code detection here since
proc_waiter now (again) detects it.
disk" device or fifo.
(fhandler_base::fchown): Ditto for changing ownership.
* fhandler_disk_file.cc (fhandler_base::fstat_helper): Accommodate device files
on ntfs partitions.
* path.cc (path_conv::check): Use isfs function to figure out if a path exists
on a filesystem to make sure that device files are caught.
(child_info::parent_wr_proc_pipe): Eliminate.
* pinfo.h (_pinfo::alert_parent): Move here from pinfo class.
(_pinfo::dup_proc_pipe): New method.
(_pinfo::sync_proc_pipe): Ditto.
* exceptions.cc (sig_handle_tty_stop): Reflect move of alert_parent.
* init.cc (dll_entry): Exit with status one if main process called ExitProcess.
* pinfo.cc (set_myself): Remove handling of parent_wr_proc_pipe.
(_pinfo::exit): Reflect move of alert_parent. Set procinfo to NULL to flag
that we are exiting normally. Always use exitcode when exiting
(although this could be a little racy).
(pinfo::init): Set default exit to SIGTERM. This will be the exit code
reported if process is terminated.
(_pinfo::dup_proc_pipe): New function.
(pinfo::wait): Duplicate wr_proc_pipe to the right place. Use dup_proc_pipe to
move the pipe to the child.
(_pinfo::sync_proc_pipe): New function.
(_pinfo::alert_parent): Move to _pinfo. Make sure that wr_proc_pipe is ours
before using it.
* sigproc.cc (child_info::child_info): Remove handling of parent_wr_proc_pipe.
* spawn.cc (spawn_guts): Pass our wr_proc_pipe to the child when execing.
Ensure that exit code of cygwin process started from windows is correctly set.
itself here, to avoid a race.
(cygthread::release): Clear more stuff. Add a diagnostic for an internal
error.
* cygthread.h (auto_release): New function.
* pinfo.h (pinfo::remember): Add an argument to denote whether child is
detached.
* fork.cc (fork_parent): Reflect change in arguments to pinfo::remember.
* pinfo.cc (_pinfo::exit): Signal exit more forcibly.
(proc_waiter): Use cygthread::auto_release to signify that cygthread::stub
should release the thread. This should avoid a race.
(pinfo::alert_parent): Don't signify an error when wr_proc_pipe == NULL.
* sigproc.cc (proc_subproc): Add support for PROC_DETACHED_CHILD.
* sigproc.h: Ditto.
* spawn.cc (spawn_guts): Specify whether child is detached or not when calling
pinfo::remember.
MapViewOfFileEx.
* cygthread.cc (cygthread::stub): Previous change to make diagnostic output
more informative was really a bust. Try again. Capture previous name in a new
field in cygthread for diagnostic purposes.
(cygthread::cygthread): Ditto.
(cygthread::release): Add an argument to control whether h should be cleared or
not.
(cygthread::terminate_thread): Use 'inuse' for tests rather than 'h'.
(cygthread): Add some diagnostic fields.
(cygthread::release): Add an argument.
* pinfo.cc (proc_waiter): Accommodate change to cygthread::release.
hProcess handle here since it is used to ensure that a new process isn't
created with the old pid after the old pid exits.
* spawn.cc (spawn_guts): Ditto.
* pinfo.cc (proc_waiter): Don't send any signals if we've execed since this
process doesn't officially exist.
* pinfo.h (pinfo::pid_handle): Eliminate. Just use hProc.
* sigproc.cc (sig_send): Don't send any signals if our sendsig doesn't exist.
That's a sign that we are execing.
(remove_proc): Eliminate pid_handle close.
* pinfo.h (pinfo::wait_thread): New element.
* pinfo.cc (pinfo::wait): Store "handle" to started thread in pinfo.
* sigproc.cc (proc_terminate): Kill any threads waiting for a process pipe.
(proc_subproc): Don't mess with pinfo if it's myself.
* child_info.h (child_info_types): Label enum for _PROC constants.
(child_info::child_info): New constructor.
(child_info::~child_info): New destructor.
(child_info::sync): Declare new function.
(child_info_fork::child_info_fork): New constructor.
(child_info_spawn::child_info_spawn): Remove old constructor.
(child_info_spawn::child_info_spawn): New constructor.
* dcrt0.cc (dll_crt0_0): Use correct sizeof when doing sanity check on passed
in child_info. Signal readiness to parent when not forking (and not spawning).
* fork.cc (sync_with_child): Delete.
(resume_child): Remove extra argument.
(sync_with_parent): Use child_info method to sync with parent.
(fork_child): Don't close fork_info->subproc_ready since that is now handled by
the destructor.
(fork_parent): Remove subproc_ready stuff. Use child_info sync method for
waiting.. Set start time here for child. Rename "forked" to "child".
(fork): Check ch.subproc_ready for validity here.
* pinfo.h (_pinfo::exec_sendsig): Temp storage for exec stub which may be
staying around to handle non-cygwin captive process.
(_pinfo::exec_dwProcessId): Ditto.
(_pinfo::_lock): Renamed from lock.
(_pinfo::lock): New method.
(_pinfo::unlock): Ditto.
(_pinfo::initialize_lock): Ditto.
* pinfo.cc (set_myself): Use initialize_lock method to initialize myself lock.
Set "exec" fields in _pinfo to zero to indicate that we've started
successfully. Set start time here when appropriate.
(_pinfo::commune_send): Use pinfo lock/unlock methods.
(proc_waiter): Remove special case for non-cywin processes. Reinstitute
handling for PID_NOCLDSTOP.
* sigproc.cc (proc_subproc): Set proper EAGAIN errno when process table is
filled.
(sig_send): Use exec_* fields from _pinfo for sending signals if the the _pinfo
sendsig never materializes.
(child_info::child_info): New constructor, renamed from init_child_info.
Zeroes child_info structure and sets appropriate fields in structure based on
chtype.
(child_info::~child_info): New destructor. Closes subproc_ready if it exists.
(child_info_fork::child_info_fork): New constructor.
(child_info_spawn::child_info_spawn): New constructor.
(child_info::ready): New function. Signals parent when child is ready.
(child_info::sync): New function. Wait for child to signal us or process to
die.
(remove_proc): Remove closing of hProcess since this should now be handled
shortly after process creation.
* spawn.cc (spawn_guts): Use child_info_spawn constructor rather than
init_child_info. Save exec_sendsig and exec_dwProcessId in execing _pinfo.
Rely on child_info constructor to properly set parent_wr_proc_pipe in ciresrv.
Revert to previous determination on whether to start a process in suspended
mode. Remove reparenting stuff. Just keep a stub around if starting a
non-cygwin process.
* fork.cc (fork_parent): Set parent_wr_proc.
* pinfo.cc (set_myself): Close child_proc_info->parent_wr_proc if it exists
rather than trying to get value from parent _pinfo.
* pinfo.h (enum parent_aleter): New enum.
(pinfo::alert_parent): Declare as returning a value.
(pinfo::parent_alive): New function.
* pinfo.cc (pinfo::alert_parent): Set wr_proc_pipe to invalid non-NULL value
when parent disappears. Return success of operation.
(proc_waiter): Use __ALERT_* enum for control since these are not really
signals. Implement __ALERT_ALIVE.
* sigproc.cc (my_parent_is_alive): Eliminate.
* sigproc.h (my_parent_is_alive): Ditto for declaration.
(__SIGREPARENT): Eliminate.
* dcrt0.cc (dll_crt0_0): Remove hexec_proc stuff.
* fork.cc (fork_child): Remove call to pinfo_fixup_after_fork.
* pinfo.cc (set_myself): Close and zero pid_handle if set.
(pinfo_fixup_after_fork): Delete.
(proc_waiter): Don't close vchild.hProcess here. Do that when we are remove
the vchild from procs. Save hProcess as pid_handle only on first reparent
operation.
(pinfo::wait): Don't set pid_handle here.
(pinfo::alert_parent): Always try to send signal. If unsuccessful then close
and zero wr_proc_pipe.
* pinfo.h (pinfo::pinfo): Make sure that appropriate parts of the class are
zeroed on construction.
(pinfo::alert_parent): Take char argument.
(pinfo_fixup_after_fork): Delete declaration.
(hexec_proc): Ditto.
* sigproc.cc (remove_proc): Close pid_handle and hProcess if appropriate.
* spawn.cc (spawn_guts): Set cygheap->pid_handle on first exec.
* cygheap.h (init_cygheap::pid_handle): New element.
* pinfo.cc (set_myself): Clear previously existing cygheap->pid_handle when a
new process has been started.
(pinfo::wait): Make sure that a handle to the newly forked/spawned process is
kept around so that the pid will not be reused.
* pinfo.h (_pinfo::pid_handle): Move.
(pinfo::pid_handle): to here.
* spawn.cc (spawn_guts): Create a pid_handle in cygheap prior to spawning to
ensure that the pid does not get reused during the lifetime of the "cygwin
pid".
* pinfo.h (pinfo::alert_parent): New function.
* exceptions.cc (sig_handle_tty_stop): Use alert_parent to send "signals" to
parent.
* fork.cc (fork_parent): Don't close pi.hProcess. Let the waiter thread do
that.
* pinfo.cc (proc_waiter): Detect case where process exits without setting the
exit code and use value from GetExitCodeProcess. Reluctantly implement
__SIGREPARENT.
(pinfo::alert_parent): Define.
* sigproc.h (__SIGREPARENT): New enum.
* spawn.cc (spawn_guts): Send reparent signal to parent on exec. Always create
process in suspended state to avoid races. Remove cygthread.h in favor of
cygtls.h throughout since cygtls now includes cygthread.h. Eliminate
ppid_handle usage throughout.
* child_info.h: Regenerate magic number
(child_info): Remove pppid_handle.
* cygthread.h (cygthread::release): New method. Frees thread without waiting.
* cygthread.cc (cygthread::stub): Set _ctinfo in _mytls to point to information
for executing thread. Don't call SetEvent if thread is no longer in use.
(cygthread::simplestub): Ditto.
* cygtls.h (_cygtls::_ctinfo): New element contains pointer to information
about executing cygthread, if any.
* dcrt0.cc: Remove last vestiges of per_thread stuff.
(dll_crt0_0): Ditto. Remove accommodation for ppid_handle.
(do_exit): Remove obsolete reparenting test.
(_exit): Exit with a more SUSv3-like exit value.
* dtable.cc (dtable::stdio_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* exceptions.cc (open_stackdumpfile): Ditto.
(handle_exceptions): Ditto.
(ctrl_c_handler): Ditto.
(sig_handle_tty_stop): Ditto. Let parent send signal to itself on STOP.
(sigpacket::process): Comment out vfork test.
(signal_exit): Use more SUSv3-like exit value on signal.
* external.cc (fillout_pinfo): Don't set hProcess.
* fork.cc: Remove VFORK cruft.
(per_thread::set): Delete.
(fork_child): Remove perthread stuff.
(fork_parent): Remove obsolete subproc_init. Accommodate new method for
tracking subprocesses.
* pinfo.cc (set_myself): Accommodate new pinfo/_pinfo layout. Set some things
here that used to be set in wait_sig.
(_pinfo::exit): Set exitcode here. Close process pipe.
(_pinfo::commune_send): Accommodeate new pinfo/_pinfo layout.
(proc_waiter): New function. Waits, in a thread for subprocess to go away.
(pinfo::wait): New function. Initialization for proc_waiter.
* pinfo.h (_pinfo::exitcode): New element.
(_pinfo::cygstarted): Ditto.
(_pinfo::wr_proc_pipe): Ditto.
(_pinfo::ppid_handle): Delete.
(_pinfo::hProcess): Delete.
(_pinfo::lock): Delete.
(pinfo::hProcess): New element.
(pinfo::lock): Ditto.
(pinfo::wait): Declare new function.
(pinfo::preserve): Define new function.
* sigproc.cc: Remove old stuff from wait_subproc thread based method.
(zombies): Remove.
(procs): New.
(my_parent_is_alive): Just check that the parent pid exists.
(mychild): Just use pinfo methods to determine if child is mine.
(proc_subproc): Revamp PROC_ADDCHILD to use pinfo::wait. Remove
PROC_CHILDTERMINATED logic. Use different method to remove processes from list
when SIGCHLD == SIG_IGN.
(proc_terminate): Gut.
(subproc_init): Delete.
(init_child_info): Remove setting of pppid_handle.
(checkstate): Revamp to only scan procs array.
(remove_proc): Rename from remove_zombie. Don't close hProcess or pid_handle.
Don't release memory if it's myself.
(stopped_or_terminated): Change logic to handle new consolidated proc/zombie
array.
(wait_subproc): Delete.
* sigproc.h: Remove obsolete EXIT_* defines.
(subproc_init): Remove declaration.
* spawn.cc (spawn_guts): Remove reparenting stuff. Use standard wait logic to
wait for child if started from a non-cygwin process.
* tlsoffsets.h: Regenerate.
* tty.cc (tty_init): Check for myself->cygstarted rather than
myself->ppid_handle to see if we were started by a cygwin process.
* include/sys/signal.h (external_pinfo::exitcode): Replace hProcess.
* include/sys/wait.h (WCOREDUMP): Define.
* fhandler_tty.cc (fhandler_tty_slave::read): Add debugging output for timeout
case.
* signal.cc (abort): Flag that we are exiting with the ABORT signal.
starting.
* child_info.h (init_child_info): Remove pid argument from declaration.
* cygheap.h (init_cygheap::pid): New element.
* dcrt0.cc (dll_crt0_0): Eliminate handling of now-noexistent cygpid parameter
in child_info struct. Set forkee to 'true' rather than cygpid since the pid
value was never used.
(dll_crt0_1): Ditto.
(_dll_crt0): Ditto.
* fork.cc (fork_child): Don't wait for sigthread. This is handled in the fork
call now.
(fork_parent): Remove obsolete pid argument from init_child_info call. Don't
do anything special with cygpid when DEBUGGING.
(fork): Delay all signals during fork.
(fork_init): Don't do anything special when DEBUGGING.
* pinfo.cc (set_myself): Remove pid parameter. Use new pid field in cygheap.
(pinfo_init): Don't pass pid argument to set_myself.
* sigproc.cc (sig_send): Wait for dwProcessId to be non-zero as well as
sendsig.
(init_child_info): Eliminate handling of pid.
(wait_sig): Implement method to temporarily hold off sending signals.
* sigproc.h (__SIGHOLD): New enum.
(__SIGNOHOLD): Ditto.
* spawn.cc (spawn_guts): Remove obsolete pid argument from init_child_info
call.
* pinfo.cc (pinfo::init): Don't consider MapViewOfFileEx error to be fatal if
exiting.
* pinfo.h (pinfo::init): Eliminate default argument and supply the argument in
the one case that needed it.
* fhandler.h (fhandler_fifo::get_io_handle): New fifo-specific method.
* fhandler_fifo.cc (fhandler_fifo::close): Close output_handle only if it is
open.
(fhandler_fifo::open_not_mine): Reorganize slightly. Don't call _pinfo methods
when the fifo is owned by me or suffer dtable lock_cs deadlock.
(fhandler_fifo::open): Call open_not_mine first, otherwise open myself
(racy).
* pinfo.cc (_pinfo::commune_recv): Duplicate fifo handles here in requesting
processes arena to avoid one potential race (of many).
(_pinfo::commune_send): Move all PICOM_FIFO code under one case statement.
* thread.cc (pthread::init_mainthread) Use existing hMainProc handle rather
than calling GetCurrentProcess.
(sigfe.s): Ensure that sigfe.s will be regenerated if it does not exist.
* dll_init.cc (dll_dllcrt0): Simplify initializing tests.
* exceptions.cc (setup_handler): Detect when stub caller is either spinning or
has acquired the lock after being suspended to avoid windows problems with
suspending a win32 API call.
* cygtls.h (_cygtls::spinning): Declare new element.
* gendef: Remove unused _siglist_index and _siglist declaration.
(_sigfe): Set spinning element when potentially looping, waiting for lock.
(_sigbe): Ditto.
(_cygtls::lock): Ditto.
(_longjmp): Ditto.
* tlsoffsets.h: Regenerate.
* pinfo.cc (_pinfo::exit): Set final exit state here. Call sigproc_terminate
if invoked with 'norecord'. Clear any residual _cygtls stuff.
* winsup.h (exit_states): Define ES_FINAL.
* spawn.cc (spawn_guts): Don't call proc_terminate specifically when execing.
Let _pinfo::exit handle that case.
* sigproc.cc (wait_subproc): Always exit loop early when proc_loop_wait.
* init.cc (munge_threadfunc): Eliminate unused argument.
(dll_entry): Reflect above change in call to munge_threadfunc.
* cygtls.h (_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::push): Make second argument mandatory.
(_cygtls::fixup_after_fork): Declare new function.
(_cygtls::lock): Ditto.
* cygtls.cc (_cygtls::fixup_after_fork): Define new function.
* dcrt0.cc (cygwin_finished_initializing): Define as bool.
(alloc_stack): Use _tlstop rather than arbitrary variable in probably vain
attempt to avoid strange fork problem on CTRL-C.
(dll_crt0_0): Remove obsolete winpids::init call.
* dll_init.cc (dll_dllcrt0): Detect forkee condition as equivalent to
initializing.
* winsup.h (cygwin_finished_initializing): Declare as bool.
* exceptions.cc (handle_exceptions): Rely on cygwin_finished_initializing to
determine how to handle exception during process startup.
(_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::interrupt_now): Fill in second argument to push.
(signal_fixup_after_fork): Eliminate.
(setup_handler): Initialize locked to avoid potential inappropriate unlock.
Resume thread if it has acquired the stack lock.
(ctrl_c_handler): Just exit if ctrl-c is hit before cygiwn has finished
initializing.
* fork.cc (sync_with_child): Don't call abort since it can cause exit
deadlocks.
(sync_with_child): Change debugging output slightly.
(fork_child): Set cygwin_finished_initializing here. Call _cygtls fork fixup
and explicitly call sigproc_init.
(fork_parent): Release malloc lock on fork failure.
(vfork): Call signal handler via _my_tls.
* sigproc.cc (sig_send): Ditto.
* syscalls.cc (readv): Ditto.
* termios.cc (tcsetattr): Ditto.
* wait.cc (wait4): Ditto.
* signal.cc (nanosleep): Ditto.
(abort): Ditto.
(kill_pgrp): Avoid killing self if exiting.
* sync.cc (muto::acquire): Remove (temporarily?) ill-advised exiting_thread
check.
* gendef (_sigfe): Be more agressive in protecting stack pointer from other
access by signal thread.
(_cygtls::locked): Define new function.
(_sigbe): Ditto.
(_cygtls::pop): Protect edx.
(_cygtls::lock): Use guaranteed method to set eax to 1.
(longjmp): Aggressively protect signal stack.
* miscfuncs.cc (low_priority_sleep): Reduce "sleep time" for secs == 0.
* pinfo.cc (winpids::set): Counterintuitively use malloc's lock to protect
simultaneous access to the pids list since there are pathological conditions
which can cause malloc to call winpid.
(winpids::init): Eliminate.
* pinfo.h (winpids::cs): Eliminate declaration.
* pinfo.h (winpids::init): Eliminate definition.
* fhandler.h (fhandler_base::has_acls): Make pass through for path_conv method.
(fhandler_base::isremote): Ditto.
(fhandler_base::is_fs_special): Ditto.
(fhandler_base::has_attribute): Ditto. Define new function.
(fhandler_base::fhaccess): Declare new function based on access_worker.
(fhandler_base::set_has_acls): Eliminate obsolete function.
(fhandler_base::set_isremote): Ditto.
* fhandler.cc (fhandler_base::fhaccess): Move from syscalls.cc and into
fhandler_base class. Use fhandler methods to access data rather than path_conv
stuff.
(fhandler_base::device_access_denied): Use fhaccess method.
* fhandler_disk_file.cc (fhandler_disk_file::opendir): Ditto.
(fhandler_base::open_fs): Remove calls to obsolete functions.
* fhandler_virtual.cc (fhandler_virtual::open): Ditto.
* winsup.h (access_worker): Remove obsolete access_worker declaration.
*syscalls.cc (access_worker): Move function to fhandler.cc.
(access): Use fhaccess method.
* pinfo.cc (_pinfo::set_ctty): Clarify debugging output.
* sigproc.cc (sig_dispatch_pending): Ditto.
* syscalls.cc (setsid): Perform minor rearrangement.
compiler bug.
* autoload.cc (TryEnterCriticalSection): Remove.
* dcrt0.cc (dll_crt0_0): Delete inappropriate setting of _my_tls.stackptr to
NULL since it has really bad consequences. Make 'si' an automatic variable.
* cygtls.cc (_threadinfo::init_thread): Correct thinko which caused thread list
to be allocated every time.
* cygtls.h (CYGTLS_PADSIZE): Define as const int.
* sync.h: Make multiple inclusion safe.
(muto::next): Eliminate.
(muto::exiting_thread): New variable.
(muto::set_exiting_thread): New function.
(new_muto): Change to use different section for mutos since c++ give
inexplicable warning in some cases otherwise.
(new_muto1): Ditto.
* dcrt0.cc (do_exit): Call muto::set_exiting_thread here.
* sync.cc (muto_start): Eliminate.
(muto::acquire): Always give exiting thread a lock. Never give thread a lock
if exiting.
(muto::release): Ditto for releasing.
* dtable.cc (dtable::init_lock): Unline function and define here.
* dtable.h (lock_cs): Define as a muto since critical sections seem to work
oddly on Windows Me.
(lock): Accommodate switch to muto.
(unlock): Ditto.
* exceptions.cc (setup_handler): Don't worry about acquiring mutos since that
hasn't mattered for a long time.
(signal_exit): Ditto: muto stuff will be handled automatically on exit now.
* Makefile.in (DLL_IMPORTS): Link advapi32 to ensure proper DLL initialization.
* autoload.cc (RegCloseKey): Arbitrarily choose this function as a "seed" to
pull the advapi32 link library in. So, comment out the autoloading.
* cygtls.cc (_threadinfo::init_thread): Just clear CYGTLS_PADSIZE.
(_threadinfo::remove): Add debugging.
(_threadinfo::find_tls): Ditto.
* cygtls.h (_threadinfo::padding): Make zero length (for now?).
* dcrt0.cc (dll_crt0_0): Move more initialization here from dll_crt0_1.
(dll_crt0_1): See above.
* dtable.h (dtable::lock): Remove commented out critical section locking.
* dtable.h (dtable::init_lock): Remove commented out critical section locking.
* dtable.h (dtable::unlock): Remove commented out critical section locking.
* exceptions.cc (interruptible): bool'ize.
* init.cc (threadfunc_fe): Revert to storing threadfunc at stack bottom.
(munge_threadfunc): Ditto. Avoid adding overhead to calibration_thread.
(prime_threads): Don't initialize tls stuff.
(dll_entry): Make minor change to initialization order.
* tlsoffsets.h: Regenerate.
* sigproc.cc (wait_sig): Add sanity check for end of process thread exit.
* select.h: Make minor formatting change.
* Makefile.in: Add still more -fomit-frame-pointer functions.
* dtable.h (dtable::lock): New function.
(dtable::unlock): New function.
(dtable::init_lock): New function.
* cygheap.h (HEAP_TLS): Declare new enum value.
(init_cygheap::threadlist): Declare new array.
(init_cygheap::sthreads): Declare new variable.
(cygheap_fdmanip::~cygheap_fdmanip): Use new dtable lock/unlock functions.
(cygheap_fdnew::cygheap_fdnew): Ditto.
(cygheap_fdget::cygheap_fdget): Ditto.
* dtable.cc (dtable_init): Initialize fdtab critical section.
(dtable::fixup_after_fork): Ditto.
(dtable::fixup_after_exec): Ditto.
(dtable::dup2): Use lock/unlock calls to protect access to fdtab.
(dtable::find_fifo): Ditto.
(dtable::fixup_before_fork): Ditto.
(dtable::fixup_before_exec): Ditto.
(dtable::set_file_pointers_for_exec): Ditto.
(dtable::vfork_child_dup): Ditto.
(dtable::vfork_parent_restore): Ditto.
* syscalls.cc (close_all_files): Ditto.
* sync.h (muto::acquired): Declare new function.
(new_muto1): Declare new macro used to specify name of muto storage.
* sync.cc (muto::acquired): Define new function.
* cygthread.cc (cygthread::stub): Remove signal chain removal call since it is
handled during initialization now.
* cygthread.cc (cygthread::simplestub): Remove signal chain removal call since
it is handled during initialization now.
* cygtls.cc (sentry): New class used for locking. Use throughout.
(_threadinfo::reset_exception): Don't pop stack.
(_threadinfo::find_tls): Move from exceptions.cc.
(_threadinfo::init_thread): Initialize array of threads rather than linked
list. Take second argument indicating thread function for this thread.
(_threadinfo::remove): Search thread array rather than linked list. Use sentry
to lock. Only unlock if we got the lock.
(_threadinfo::find_tls): Ditto for first two.
(handle_threadlist_exception): Handle exceptions when manipulating the thread
list in case of premature thread termination.
(_threadinfo::init_threadlist_exceptions): Ditto.
* cygtls.h (TLS_STACK_SIZE): Decrease size.
(_threadinfo::padding): Add element to avoid overwriting lower part of stack.
(_threadinfo::remove): Add a "wait" argument to control how long we wait for a
lock before removing.
* exceptions.cc (init_exception_handler): Make global. Take argument to
control exception handler being set.
(ctrl_c_handler): Wait forever when removing self from signal chain.
(_threadinfo::find_tls): Move to cygtls.cc.
(sig_handle): Reorganize detection for thread-specific signals.
* heap.cc (heap_init): Rework slightly. Make fatal error more verbose. Remove
malloc initialization since it can't happen during dll attach.
* init.cc (search_for): Move address to search for on stack here.
(threadfunc_ix): Ditto for stack offset. Make shared so that stack walk
potentially only has to be done once when cygwin processes are running.
(threadfunc_fe): Use standard tls to store thread function (may change back
later).
(calibration_thread): New function. Potentially called to find threadfunc_ix.
(munge_threadfunc): Search for "search_for" value on stack. Output warning
when thread func not found on stack. Use standard tls to store thread
function.
(prime_threads): New function. Called to prime thread front end.
(dll_entry): Call dll_crt0_0 here when DLL_PROCESS_ATTACH. Call prime_threads
here. Try to remove thread from signal list here.
* sigproc.cc (wait_sig): Initialize threadlist exception stuff here.
* thread.cc (pthread::exit): Pass argument to signal list remove function.
* thread.h: Remove obsolete *ResourceLock defines.
* tlsoffsets.h: Regenerate.
* winsup.h (spf): Define temporary debug macro to be deleted later.
* dcrt0.cc (dll_crt0_0): New function, called during DLL initialization.
Mainly consists of code pulled from dll_crt0_1.
(dll_crt0_1): See above.
(_dll_crt0): Wait for initial calibration thread to complete, if appropriate.
Move some stuff to dll_crt0_0.
(initialize_main_tls): Accommodate argument change to
_thread_info::init_thread.
* fork.cc (fork_child): Ditto.
(sync_with_child): Fix debug message.
* external.cc (cygwin_internal): Remove special considerations for
uninitialized dll since initialization happens during dll attach now.
* dlfcn.cc (dlopen): Remove obsolete *ResourceLock calls.
(dlclose): Ditto.
* cygheap.h (init_cygheap::close_ctty): Declare new function.
* cygheap.cc (init_cygheap::close_ctty): Define new function.
* syscalls.cc (close_all_files): Use close_ctty.
(setsid): Ditto.
* cygthread.cc (cygthread::stub): Remove exception initialization.
* cygthread.cc (cygthread::stub): Remove exception initialization.
(cygthread::simplestub): Ditto.
* thread.cc (pthread::thread_init_wrapper): Ditto.
* cygtls.cc (_last_thread): Make static.
(_threadinfo::call2): Initialize exception handler here.
(_threadinfo::find_tls): Move here.
* exceptions.cc (_threadinfo::find_tls): Move.
* dcrt0.cc (__api_fatal): Add prefix info to message here rather than including
it in every call to function.
* winsup.h (api_fatal): Accommodate above change.
* debug.cc (add_handle): Don't do anything if cygheap not around.
(mark_closed): Ditto.
* dll_init.cc (dll_list::detach): Fix debug output.
* fork.cc (sync_with_child): Ditto.
(vfork): Improve debug output.
* heap.cc (heap_init): Ditto.
* exceptions.cc (try_to_debug): Clarify message when debugger attaches.
this change throughout.
* dtable.cc (dtable::add_archetype): Use correct count when iterating through
*active* archetypes.
* dtable.cc (dtable::fixup_after_exec): Close handle if close_on_exec and
archetype exists since archetype currently does not set windows close-on-exec
flag (FIXME).
* fhandler_tty.cc (fhandler_tty_slave::open): Change debugging output slightly.
(fhandler_tty_slave::close): Ditto.
(fhandler_tty_slave::fixup_after_fork): Just report on inherited use counts
since since archetype currently does not set windows close-on-exec flag
(FIXME).
* pinfo.cc (_pinfo::set_ctty): Change debugging output slightly.
* cygheap.cc (cygheap_init): Remove open_fhs accommodation and use count
reporting.
* perthread.h (vfork_save::fhctty): New element.
* perthread.h (vfork_save::open_fhs): New element.
* fork.cc (vfork): Muck around with ctty and open_fhs stuff, both of which are
now saved in the vfork_save structure.
(report_tty_counts): New macro. Use throughout for reporting tty use counts.
* dtable.cc (dtable::vfork_child_dup): Add debugging output for usecount
increment. Increment open_fhs if appropriate.
(dtable::vfork_parent_restore): "Close" artificially bumped ctty.
(dtable::vfork_child_fixup): Close ctty since it was bumped prior to vfork.
Save open_fhs around close since the closing of these handles has no effect on
the console.
* fhandler_tty.cc (fhandler_tty_slave::open): Reorganize calls to allow for
easier tracking of usecount modification.
(fhandler_tty_slave::open): Ditto.
(fhandler_tty_master::fixup_after_exec): Ditto.
* fhandler_tty.cc (fhandler_tty_master::init): Fix so that children do not
inherit master tty handles.
(fhandler_tty_master::fixup_after_fork): Remove, since it was never used.
(fhandler_tty_master::fixup_after_exec): Ditto.
* pinfo.cc (_pinfo::set_ctty): Increment open_fhs when ctty is set.
* cygheap.cc (cygheap_init): Ditto.
* syscalls.cc (setsid): *Always* call close on opened ctty since the archetype
is associated with the ctty and it counts as an opened handle.
* tty.cc (tty::common_init): Don't protect input/output mutex since it confuses
subsequent fork/execs when CYGWIN=tty.
calculated mask in debugging output.
* sigproc.h (set_signal_mask): Reflect above change in declaration.
* path.cc (mount_item::build_win32): Take path apart before feeding it to
fnmunge. Throughout, change use of _reent_winsup()-> to _my_tls.locals.
instead. Throughout, remove obsolete MT_SAFE/_CYG_THREAD_FAILSAFE
considerations. Througout, add cygtls.h include.
* Makefile.in (DLL_OFILES): Add cygtls.o. Add some more objects to the
-fomit-frame-pointer list.
* acconfig.h: Remove obsolete settings.
* config.h.in: Ditto.
* bsdlib.cc: Add cygtls.h include.
* configure.in: Remove --enable-extra-threadsafe-checking.
* configure: Regenerate.
* cygtls.h (_local_storage): New struct renamed from _winsup_t (sic).
(_threadinfo:local_clib): Add new field.
(_threadinfo::locals): Ditto.
(_threadinfo::init_thread): Accept second _reent * argument.
(_threadinfo::call): Define as regparm.
(CYGTLS_PADSIZE): Remove unnecessary slop.
(_getreent): Define as a macro.
* thread.h: Remove _CYG_THREAD_FAILSAFE and MT_SAFE stuff.
(_winsup_t): Move to cygtls.h.
(ResourceLocks::ResourceLocks): Eliminate empty constructor.
(MTinterface::reents): Eliminate.
(MTinterface::thread_self_key): Eliminate.
(MTinterface::MTinterface): Eliminate.
* dcrt0.cc: Include stdio.h for _impure_ptr initialization.
(do_global_ctors): Remove run_ctors_p (sic) considerations. Don't call atexit
here.
(__main): Initialize destructors for user here.
(dll_crt0_1): Accept a dummy argument. Don't call init_thread here. Don't set
_impure_ptr here. Call do_global_ctors after more things have been
initialized.
(_dll_crt0): Define zeros buffer as max of needed size of CYGTLS_PADSIZE so
that it can be used for two purposes while minimizing stack usage. Initialize
_impure_ptr specifically, for speed. Call dll_crt0_1 with buffer argument.
(cygwin_dll_init): Call dll_crt0_1 with dummy argument.
* dtable.cc (dtable::find_unused_handle): Remove call to AssertResourceOwner.
* exceptions.cc: Move _threadinfo stuff to new file.
* cygtls.cc: New file.
* gentls_offsets: Accommodate increasing complexity of cygtls.h.
* hires.h (hires_base::~hires_base): Remove.
* init.cc (dll_entry): Remove setting of reents.
* thread.cc: Remove syslog.h include.
(__getreent): Simplify to use _my_tls.
(_reent_winsup): Delete.
(AssertResourceOwner): Delete.
(MTinterface::Init): Remove setting of _clib and _winsup, with all that
entails.
(MTinterface::fixup_after_fork): Ditto.
(pthread::thread_init_wrapper): Ditto. Also remove call to
set_tls_self_pointer.
(pthread::set_tls_self_pointer): Eliminate.
(pthread::get_tls_self_pointer): Just return _my_tls.tid;
(__reent_t::init_clib): Eliminate.
* tlsoffsets.h: Regenerate.
getsigmask.
* fhandler.h (fhandler_base): Make friends with close_all_files.
* pinfo.cc (_pinfo::set_ctty): Add more debugging.
* sigproc.cc (proc_can_be_signalled): Detect state when signal handler thread
is gone in target process as an EPERM situation. Set errno to ESRCH if process
doesn't exist.
(sigproc_terminate): Set sendsig to illegal value when closed.
(sig_send): Rely on proc_can_be_signalled setting the proper errno.
* syscalls.cc (close_all_files): Detect when all ttys are closed prior to
calling close_all_files. The ctty needs to be closed explicitly in this case.
(init_cheap::ctty): Change to pointer.
* dtable.h (dtable::find_archetype): Declare new function.
(dtable::add_archetype): Declare new function.
(dtable::delete_archetype): Declare new function.
(dtable::narchetypes): Declare.
(dtable::farchetypes): Declare.
(dtable::initial_archetype_size): Declare.
(dtable::dtable): Initialize new fields.
(dtable::initial_archetype_size): Declare.
* dtable.cc (dtable::find_archetype): Define new function.
(dtable::add_archetype): Define new function.
(dtable::delete_archetype): Define new function.
(dtable::initial_archetype_size): Define.
* fhandler.h (fhandler_base::archetype): Declare.
(fhandler_base::usecount): Declare.
* fhandler.cc (fhandler_base::fhandler_base): Initialize new fields.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Pass NULL to third
argument of set_ctty.
* fhandler_tty.cc (fhandler_tty_slave::open): Accommodate new archetype method
to create only one instance of a tty.
(fhandler_tty_slave::close): Don't close handles unless archetype usecount is
zero. When that happens, close archetype too.
(fhandler_tty_slave::dup): Just copy archetype. Set use count appropriately.
Set ctty, if appropriate.
(fhandler_tty_common::dup): Remove slave considerations.
(fhandler_tty_common::set_close_on_exec): Remove cygheap->ctty considerations.
* pinfo.cc (_pinfo::set_ctty): Accommodate new archetype methods.
* pinfo.h (_pinfo::set_ctty): Make third argument explicit.
* syscalls.cc (close_all_files): Decrement controlling tty use count before
closing all handles to allow controlling tty to be closed. Remove previous
controlling tty considerations.
throughout.
* tty.cc (tty::common_init): Remove call to SetKernelObjectSecurity and edit
some comments.
* cygheap.h (init_cygheap::ctty): Add new element.
* devices.in (device::parse): Remove special handling for /dev/tty.
* devices.cc: Regenerate.
* dtable.cc (build_fh_pc): Don't reset /dev/tty device. Let the device opener
do that.
* fhandler_termios.cc (tty_min::set_ctty): Redefine to _pinfo class.
* fhandler_tty.cc (fhandler_tty_common::set_close_on_exec): Avoid setting
noninherit flag for ctty.
* tty.h: Move BOOLs to bools.
(tty_min::set_ctty): Redeclare to _pinfo class.
* pinfo.cc (_pinfo::set_ctty): Define new function based on tty_min::set_ctty.
Change first argument from tty number to tty_min class.
* pinfo.h (_pinfo::set_ctty): Declare.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Reflect move of
set_ctty to _pinfo class.
* fhandler_tty.cc (fhandler_tty_slave::open): Treat FH_TTY specially. Use
saved cygheap value if it exists. Otherwise convert to real device and save on
first time open.
(fhandler_tty_common::dup): Potentially set controlling tty if duping a slave
tty.
* syscalls.cc (setsid): Close controlling tty in cygheap.
* tty.cc: Change some BOOLs to bools.
Christopher Faylor
Joshua Daniel Franklin