Create two new inline functions is_alt_numpad_key(PINPUT_RECORD) and
is_alt_numpad_event(PINPUT_RECORD) which contain the actual checks.
Call these functions from fhandler_console::read and peek_console for
better readability.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
{p}select/{p}poll completely ignored Alt+Numpad key sequences in console
input which results in newer readline using pselect to fail handling such
sequences correctly. See https://cygwin.com/ml/cygwin/2017-01/msg00135.html
During debugging and testing it turned out that while reading console
input, single key presses during an Alt+Numpad sequences where not
ignored, so ultimately a sequence like
Alt-down Numpad-1 Numpad-2 Numpad-3
whihc is supposed to result in a single character in the input stream
will actually result in 4 chars in the input stream, three control
sequences and the actual character.
Both problems should be fixed by this patch.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This patch fixes the following problem:
Commit 9636c426 refactored the pipe code especially to make sure
to call WriteFile only with chunks matching the maximum atomic write
count. This accidentally introduced a small change in behaviour
on blocking pipes due to the success case falling through into the
error case. Rather then writing atomic chunks until all bytes are
written, the code immediately broke from the loop after writing
the first chunk, basically the same as in case of non-blocking
writes. This behaviour is not compliant to POSIX which requires
"Write requests to a pipe or FIFO [...]
* If the O_NONBLOCK flag is clear, a write request may cause the
thread to block, but on normal completion it shall return nbyte."
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If newfile already exists and is in use, trying to overwrite it with
NtSetInformationFile(FileRenameInformation) fails exactly as if we
don't have the permissions to delete it. Unfortunately the return code
is the same STATUS_ACCESS_DENIED, so we have no way to distinguish
these cases. What we do here so far is to start a transaction to delete
newfile. If this open fails with a transactional error we stop the
transaction and retry opening the file without transaction.
But, here's the problem: If newfile is in use, NtOpenFile(oldfile)
naturally does NOT fail with a transactional error. Rather, the
subsequent call to unlink_nt(newfile) does, because there's another
handle open to newfile outside a transaction. However, the code does
not check if unlink_nt fails with a transactional error and so fails
to retry without transaction.
This patch recifies the problem and checks unlink_nt's status as well.
Refactor code to get rid of goto into another code block.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
A *very* recent Windows build adds more code to the preamble of
RtlGetCurrentDirectory_U() so that the previous heuristic failed to find
the call to the locking routine.
This only affects the 64-bit version of ntdll, where the 0xe8 byte is
now found at offset 40, not the 32-bit version. However, let's just
double the area we search for said byte for good measure.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Returns the process's environment concatenated into a single block of
null-terminated strings, along with the length of the environment block.
Adds an associated PICOM_ENVIRON commune_process handler.
win32env_to_cygwenv handles converting wchar to char and some other
minor taks. Optionally it handles converting any paths in variables to
posix paths.
This will be useful for implementing /proc/<pid>/environ
commit 67fd2101 introduced a bad bug. Changing sys_privs to a static
area and just returning a pointer is nice... *if* the calling code doesn't
call free() on it. Make sure callers check pointer for sys_privs and
refrain from calling free, if so.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
GNU no longer encourages the use of documentation mirrors, to avoid
referring to obsolete documentation. Also www.fsf.org/manual/ is
just a redirect to www.gnu.org/manual/
Links to using-utils.html #fragments are no longer correct as each utility
is now a separate page, since 646745cb.
indiana.edu seems to have moved XLiveCD information, without a redirect.
Linking to clean_setup.pl on cygwin.com doesn't work, as direct downloads
aren't allowed, so instead state where it can be found on a mirror.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Include ntsecapi.h where required and just redefine RtlGenRandom
correctly in the ntsecapi.h wrapper.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In preparation of exporting getentropy/getrandom to userspace, rearrange
code a bit:
- Define RtlGenRandom in ntdll.h.
- Drop calls to getentropy in favor of RtlGenRandom (fhandler_socket,
fhandler_dev_random).
- Add try/except blocks in fhandler_dev_random to return EFAULT rather
than crashing if buffer pointer is invalid.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
NtOpenFile/NtCreateFile on non-existent paths on network drives has a
bug. Assuming a path Z:\dir\file. Further assuming that Z:\dir does
not exist.
The first NtOpenFile("Z:\dir\file") correctly returns
STATUS_OBJECT_PATH_NOT_FOUND. Subsequent calls incorrectly
return STATUS_OBJECT_NAME_NOT_FOUND.
This appears to be some kind of caching behaviour. Waiting a while
before repeating the call correctly returns STATUS_OBJECT_PATH_NOT_FOUND
again.
This patch works around the observed misbehaviour.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far, when converting from POSIX to Windows notation, cygwin_conv_path
fails to check for .exe suffix, so /path/foo did not return /path/foo.exe
even if this file exists.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The original code only skipped the "./", but missed to test if more
trailing slashes are present. This in turn leads to invalid conversion.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Don't allow signal 0 in signal(2), sigaction(2), siginterrupt(3).
Don't allow any signal in sigqueue(3) but explicitely handle
signal 0 as in kill(2).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Provide <memory.h> for all standard Newlib targets and remove
Cygwin-specific header. Most POSIX like systems provide this historic
header.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
This makes it possible provide operating system specific types for
<pthread.h>. It is in line with the FreeBSD header file structure and
allows a future cleanup of <pthread.h> to not expose unrelated things
via <sys/types.h> and <unistd.h>. Glibc uses the similar
<bits/pthreadtypes.h> for this purpose.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
This not only simplifies the code but also fixes potential
memory corruption
Fixes Coverity CID 66952
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Update the getconf utility to support the new flag as well as
_PC_POSIX_PERMISSIONS and _PC_POSIX_SECURITY. These were previously
unsupported, probably as an oversight.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Additionally to eccefd97, we need to ensure the exception handler is
installed for the _ljfault used to implement _try/_except to get called.
Also use the correct macro for x86 conditional compilation.
Addresses https://cygwin.com/ml/cygwin/2016-09/msg00143.html
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Long-standing problem in one of the corner cases of rename(2):
If we rename a directory a check is performed to see if newpath is
identical to oldpath or a subdir of oldpath. This check is
(accidentally? no hints anywhere in ChangeLogs or code) performed
case-insensitive for as long as we use Unicode paths and NT functions.
This leads to the problems described in
https://cygwin.com/ml/cygwin/2016-09/msg00264.html
Change this to be conditional case-sensitive as all other checks but
let's take this with a grain of salt. There may be corner-cases in
this corner-case which require to chek parts of the path always
case-insensitive. Off the top of my head I can't construct such a
case but that's no proof they don't exist :}
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit d16a5630 dropped usage of cygheap's locale functions
in favor of local on-the-fly usage of UTF-8 instead of ASCII.
This allowed to use the current local rather than a fixed
system-wide locale set at startup time. d16a5630 just missed
to add the ASCII->UTF-8 conversion in the console as well.
Fixes https://cygwin.com/ml/cygwin/2016-10/msg00000.html
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
On 09/02/2016 11:03 AM, Corinna Vinschen wrote:
> On Sep 2 10:46, Michael Haubenwallner wrote:
>> On 09/01/2016 03:32 PM, Corinna Vinschen wrote:
>>> You could just use the global variable program_invocation_name. If in
>>> doubt, use the Windows path global_progname and convert it to full POSIX
>>> via cygwin_conv_path.
>>
>> Patch updated, using global_progname now.
>
> Looks good and you're right to do it this way since I just noticed
> that program_invocation_name may return a relative pathname.
Yep.
> Btw., in other calls which require the full POSIX path we use
> mount_table->conv_to_posix_path instead of cygwin_conv_path (see
> e. g. fillout_pinfo()). It's a bit faster. Maybe something for a
> followup patch.
No problem - attached.
This renders the original patch 4/4 valid again.
> Note for some later improvement: I really wonder why we don't store
> the absolute POSIX path of the current executable globally yet...
Same here.
Thanks!
/haubi/
>From f7255edd33cb4abe34f27188aab8dccdfa5dd2a0 Mon Sep 17 00:00:00 2001
From: Michael Haubenwallner <michael.haubenwallner@ssi-schaefer.com>
Date: Wed, 31 Aug 2016 18:05:11 +0200
Subject: [PATCH 3/4] dlopen: on x/lib search x/bin if exe is in x/bin
citing https://cygwin.com/ml/cygwin-developers/2016-08/msg00020.html
> Consider the file /usr/bin/cygz.dll:
> - dlopen (libz.so) success
> - dlopen (/usr/bin/libz.so) success
> - dlopen (/usr/lib/libz.so) fails
* dlfcn.c (dlopen): For dlopen("x/lib/N"), when the application
executable is in "x/bin/", search for "x/bin/N" before "x/lib/N".
Rather than searching all search dirs per one basename,
search for all basenames within per one search dir.
pathfinder.h (check_path_access): Interchange dir- and basename-loops.
Instead of find_exec, without changing behaviour use new pathfinder
class with new allocator_interface around tmp_pathbuf and new vstrlist
class.
* pathfinder.h (pathfinder): New file.
* vstrlist.h (allocator_interface, allocated_type, vstrlist): New file.
* dlfcn.cc (dlopen): Avoid redundant GetModuleHandleExW with RTLD_NOLOAD
and RTLD_NODELETE. Switch to new pathfinder class, using
(tmp_pathbuf_allocator): New class.
(get_full_path_of_dll): Drop.
The new functionality to set the thread name for debugging purposes
creates exception debugging events. These are printed out when running
strace. Since these exceptions have nothing to do with real exceptions
but are, like breakpoint execptions, expected and non-fatal, don't print
exception info for them.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
On Windows 8.1 and later, the NetUserChangePassword call apparently
doesn't accept the usual "\\server" string anymore, but requires to
use the "domain" instead, otherwise it emits en error code 1265,
ERROR_DOWNGRADE_DETECTED. Since this is accepted by pre-8.1 as well,
use the domain indiscriminately when calling NetUserChangePassword
from passwd(1).
While at it, do some minor cleanup in passwd.c.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Keep __ctype_ptr__ available on Cygwin only, for backward compatibility
with existing apps referencing it via the ctype macros.
Otherwise initialize __global_locale.ctype_ptr and __C_locale.ctype_ptr
and use them throughout.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Wrap SetThreadName()'s call to RaiseException() in __try/__except/__endtry,
so that if the attached debugger doesn't know about MS_VC_EXCEPTION (e.g.
current gdb and probably strace as well) and continues exception processing,
we ignore it, rather than dying due an unhandled exception.
Also remove an unnecessary cast in the RaiseException() invocation.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
GDB since commit 24cdb46e [1] can report and use these names.
Add utility function SetThreadName(), which sends a thread name to the
debugger.
Use that:
- to set the default thread name for main thread and newly created pthreads.
- in pthread_setname_np() for user thread names.
- for helper thread names in cygthread::create()
- for helper threads which are created directly with CreateThread.
Note that there can still be anonymous threads, created by system or
injected DLLs.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=24cdb46e9f0a694b4fbc11085e094857f08c0419
This patch adds pthread_getname_np and pthread_setname_np.
These were added to glibc in 2.12[1] and are also present in some form on
NetBSD and several UNIXes.
The code is based on NetBSD's implementation with changes to better match
Linux behaviour.
Implementation quirks:
* pthread_setname_np with a NULL pointer segfaults (as linux)
* pthread_setname_np returns ERANGE for names longer than 16 characters (as
linux)
* pthread_getname_np with a NULL pointer returns EFAULT (as linux)
* pthread_getname_np with a buffer length of less than 16 returns ERANGE (as
linux)
* pthread_getname_np truncates the thread name to fit the buffer length.
This guarantees success even when the default thread name is longer than 16
characters, but means there is no way to discover the actual length of the
thread name. (Linux always truncates the thread name to 16 characters)
* Changing program_invocation_short_name changes the default thread name (on
linux, it has no effect on the default thread name)
I'll leave it up to you to decide if any of these matter.
This is implemented via class pthread_attr to make it easier to add
pthread_attr_[gs]etname_np (present in NetBSD and some UNIXes) should it
ever be added to Linux (or we decide we want it anyway).
[1] https://sourceware.org/git/?p=glibc.git;a=blob;f=NEWS
This routine makes a call to fabs instead of fabsl(), causing truncation.
Clang complains (warning: absolute value function 'fabs' given an argument of type 'long double' but has parameter of type 'double' which may cause truncation of value).
Signed-off-by: David Wohlferd <dw@LimeGreenSocks.com>
The R language has some hacks specifically for mingw-w64 that
were caused by our handling of NaNs in sqrt(x). R uses a
special valued NaN to mean 'Not Available' and expects it to
be retained through various calculations. Our sqrt(x) doesn't
do this, instead it normalises such a NaN (retaining sign).
From:
http://wwwf.imperial.ac.uk/~drmii/M3SC_2016/IEEE_2008_4610935.pdf
"6.2.3 NaN propagation
An operation that propagates a NaN operand to its result and
has a single NaN as an input should produce a NaN with the
payload of the input NaN if representable in the destination
format."
There might even be a slight speed-up from this too.
Thanks to Duncan Murdoch for finding the reference.
Change nl_langinfo to nl_langinfo_l using locale given as argument.
Remove outdated TRANSITION_PERIOD_HACK. The codeset is stored in
the locale for quite some time now. For !MB_CAPABLE targets, just
return "US_ASCII" as codeset.
Implement nl_langinfo by calling nl_langinfo_l. Export nl_langinfo_l
from Cygwin DLL and bump minor API version number.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The former __locale_charset always fetched the current locale's charset.
We need the per-locale charset, too, in future. Rename __locale_charset
to __current_locale_charset and change __locale_charset to take a
locale_t as parameter. Accommodate througout.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 6f3943b erroneously removed the `#ifdef _COMPILING_NEWLIB'
guarding the __getreent inline function. This patch ignored the
fact that config.h is included when building applications, and the
code in question requires internal, auto-generated headers to be
available which are not exposed to user-space.
Reinstantiate defined(_COMPILING_NEWLIB) test and alternatively
check for defined (__INSIDE_CYGWIN__), otherwise we'd have to
reinstantiate the __getreent macro in cygtls.h which is really
confusing.
While testing it turned out that a low number of source codes inside
Cygwin won't see the inline __getreent due to a missing __INSIDE_CYGWIN__
definition. For malloc.cc this was actually deliberate to get different
definitions from including cygmalloc.h. Change this by defining
__INSIDE_CYGWIN__ in malloc.cc but changing the test in cygmalloc.h
to test for defined(DLMALLOC_VERSION). This might need a change if we
ever get around to replace dlmalloc with a newer, more threading-aware
malloc implementation.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit 97d0449 left a bit to be desired. First, the fact that any
new-style ACL couldn't be "standard ACL" anymore was very much over
the top. On one hand Admins and SYSTEM ACEs are not supposed to be
masked, but on the other hand we *must* create the CLASS_OBJ
because otherwise we don't have information about masking the
execute perms for both groups. The ACL would also fail aclcheck.
And while get_posix_access now returns the "is standard acl" flag,
it hasn't been utilized by set_created_file_access. Rather,
set_created_file_access has simply continued to check for
nentries > MIN_ACL_ENTRIES, which led to all kinds of weird group
and CLASS_OBJ perms. The new code now always manipulates CLASS_OBJ
perms if a CLASS_OBJ is present, and it always manipulates group perms
if the ACL has been marked as "standard" ACL.
Another problem (not related to commit 97d0449) is the order
get_posix_access adds missing perms. CLASS_OBJ perms are computed
*before* missing GROUP_OBJ perms have been added. Thus the CLASS_OBJ
perms could be too tight and led to additional, buggy DENY ACEs.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This partially reverts commit 10a30e7 as far as the Cygwin version of
the __getreent function is concerned. Remove _COMPILING_NEWLIB guard
only allowing to use __getreent inline function when building newlib,
since we wan to use it in Cygwin as well.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Stefan Assmann <sassmann@redhat.com>
This reverts commit 4de8596. It worked around a problem which was
actually introduced by patch 10a30e7 a few weeks ago. Rather than
adding special code to the newlib version of __getreent, the followup
patch reinstantiates the original, Cygwin-only implementation of
__getreent.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Stefan Assmann <sassmann@redhat.com>
No real domain, no DC, no infos via NetUserGetInfo... nothing. Just nothing.
Use fixed uid 0x1000 (4096) for AzureAD user and gid 0x1001 (4097) for
AzureAD group. Note that this group is part of the user token, but it's
not the primary group. The primary group SID is, unfortunately, the
user's SID.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far the lib function __getreent always returned _impure_ptr. On Cygwin
this is only correct after _impure_ptr got initialized. The inline
function in include/cygwin/config.h always returns the right _reent ptr,
though.
After introducing per-thread locales, the __getreent function is called
prior to initialization of _impure_ptr (from dll_crt0_0) to access the
locale pointer, which leads to a crash.
Fix the __getreent lib function for Cygwin to return the correct _reent
pointer all the time. Rename inline function to __inline_getreent
and introduce a macro __getreent calling the inline function. Change
the lib function __getreent to call __inline_getreent on Cygwin.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The default UI language returned by GetUserDefaultUILanguage does not
necessarily reflect what the user really wants. E. g., the system could
be en_US, but the desired language is en_CA, without having a CA langpack
installed.
Changing the settings under "Languages" and changing the keyboard layout
is only affecting the so-called "Input language", while what's returned
by GetUserDefaultUILanguage is the "Display language". Changing the
latter requires installing MUI langpacks.
Thus, we introduce a way to fetch the "Input language" using the -i or
--input option.
Also clean up documentation of locale(1).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Add global const __C_locale for reference purposes.
Bump Cygwin API minor number and DLL major version number to 2.6.0.
Signed-off by: Corinna Vinschen <corinna@vinschen.de>
This allows looping through the structs and buffers. Also
rearrange definitions to follow order of LC_xxx values.
Signed-off by: Corinna Vinschen <corinna@vinschen.de>
Don't use global variables. This allows to call loadlocale from
the yet to be created newlocale().
Rename _thr_locale_t to __locale_t (these locales are not restricted
to threads so the name is misleading).
Along these lines, fix _set_ctype to take a __locale_t as parameter.
Signed-off by: Corinna Vinschen <corinna@vinschen.de>
- Remove charset parameter from low level __foo_wctomb/__foo_mbtowc calls.
- Instead, create array of function for ISO and Windows codepages to point
to function which does not require to evaluate the charset string on
each call. Create matching helper functions. I.e., __iso_wctomb,
__iso_mbtowc, __cp_wctomb and __cp_mbtowc are functions returning the
right function pointer now.
- Create __WCTOMB/__MBTOWC macros utilizing per-reent locale and replace
calls to __wctomb/__mbtowc with calls to __WCTOMB/__MBTOWC.
- Drop global __wctomb/__mbtowc vars.
- Utilize aforementioned changes in Cygwin to get rid of charset in other,
calling functions and simplify the code.
- In Cygwin restrict global cygheap locale info to the job performed
by internal_setlocale. Use UTF-8 instead of ASCII on the fly in
internal conversion functions.
- In Cygwin dll_entry, make sure to initialize a TLS area with a NULL
_REENT->_locale pointer. Add comment to explain why.
Signed-off by: Corinna Vinschen <corinna@vinschen.de>
Move all locale category structure definitions into setlocale.h and remove
other headers in locale subdir. Create inline accessor functions for
current category struct pointers and use throughout. Use pointers to
"C" locale category structs by default in __global_locale.
Signed-off by: Corinna Vinschen <corinna@vinschen.de>
Introduce first cut of struct _thr_locale_t used for the locale_t definition.
Introduce global instance called __global_locale used by default.
Introduce internal inline functions __get_global_locale, __get_locale_r,
__get_current_locale.
Remove usage of global variables in favor of accessor functions pointing to
__global_locale for now. Include all local headers in locale subdir from
setlocale.h to get single include for internal locale access.
Introduce __CTYPE_PTR macro to replace direct access to __ctype_ptr__
and use throughout in isxxx functions.
Signed-off by: Corinna Vinschen <corinna@vinschen.de>
This is a followup to a report back in 2011 about essentially the same issue:
https://cygwin.com/ml/cygwin/2011-04/msg00031.html
The same test program in that report demonstrates the issue, but with
kill sending any non-zero signal. To reiterate, the problem here is
POSIX compliance with respect to sending signals to zombie processes.
http://pubs.opengroup.org/onlinepubs/9699919799/functions/kill.html
claims:
Existing implementations vary on the result of a kill() with pid
indicating an inactive process (a terminated process that has not been
waited for by its parent). Some indicate success on such a call
(subject to permission checking), while others give an error of
[ESRCH]. Since the definition of process lifetime in this volume of
POSIX.1-2008 covers inactive processes, the [ESRCH] error as described
is inappropriate in this case. In particular, this means that an
application cannot have a parent process check for termination of a
particular child with kill(). (Usually this is done with the null
signal; this can be done reliably with waitpid().)
In response to the originally issue, this was fixed *specifically* for
the case of kill(pid, 0). But my reading of the above is that kill()
should return 0 in this case regardless of the signal (modulo
permissions, etc.). On Linux, for example, when calling kill with pid
of a zombie process the kernel will happily deliver the signal to the
relevant task_struct; it will just never be acted on since the task
will never run again.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit d7586cb incorrectly checked only for the new cursor position
beyond the old cursor position to decide if we have to correct for user
scrolling. Since this situation is handled just fine if the cursor is
still visible, only perform the subsequent correction if the cursor is
not in the visible console window.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit ba58e5f lowered permission requirements when opening threads
and processes to {PROCESS,THREAD}_QUERY_LIMITED_INFORMATION. However,
when creating the /proc/<PID>/maps file, the call to VirtualQueryEx
requires PROCESS_QUERY_INFORMATION access
Note: It seems PROCESS_QUERY_LIMITED_INFORMATION is sufficient starting
with Windows 8.1, but this is neither documented on MSDN, nor is it a
safe bet. It may have to do with a fixed implementation of the UAC
trust levels. Let's better follow the docs for now.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
We must call SetConsoleCursorPosition prior to SetConsoleWindowInfo,
otherwise the scroll bars will not be updated by the OS. Make sure
to scroll the console window by just the right amount to have the
new cursor position one line after the used console buffer area at
the top of the console window, no matter the scroll state.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
SIGTTIN should be raised when read() is made on a tty in a backgrounded
process, but not when it's tested with poll()/select().
I guess poll()/select() does need to call bg_check(), in order to detect the
error conditions that notices (that is, if bg_check() returns bg_eof or
bg_error, then fd is ready as an error condition exists) so add an optional
parameter to fhandler_base::bg_select() to indicate that signals aren't
desired.
See https://cygwin.com/ml/cygwin-developers/2016-07/msg00004.html
Mingw-w64, which is the source of this code, uses different
definitions of the rounding bits FE_TONEAREST and friends.
They immediately reflect the bit values in the FPU control word,
while on Cygwin they are shifted down to become the values 0-3.
Fix the bit computing expression to account for the difference.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
get_nt_native_path handles the transposition of chars not allowed
in Windows pathnames. However, it never starts transposition at
the start of the string, which is wrong for relative paths. Fix it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
POSIX requires that SSIZE_MAX have the same type as ssize_t, but
on 32-bit, we were defining it as a long even though ssize_t
resolves to an int. It also requires that SSIZE_MAX be usable
via preprocessor #if, so we can't cheat and use a cast.
If this were newlib, I'd have had to hack _intsup.h to probe the
qualities of size_t (via gcc's __SIZE_TYPE__), similar to how we
already probe the qualities of int8_t and friends, then cross our
fingers that ssize_t happens to have the same rank (most systems
do, but POSIX permits a system where they differ such as size_t
being long while ssize_t is int). Unfortunately gcc gives us
neither __SSIZE_TYPE__ nor __SSIZE_MAX__. On the other hand, our
limits.h is specific to cygwin, so we can just shortcut to the
correct results rather than being generic to all possible ABI.
Signed-off-by: Eric Blake <eblake@redhat.com>
Improve the description of Cygwin ldd utility to give a bit more detail
about how it does what it does
Also add a security warning (modelled after the one in the Linux manpage)
that it may end up executing the file it is applied to.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Fix an instance of the invalid <pathname> tag in Cygwin utils documentation,
by using the valid <filename> tag instead.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
In Cygwin utils documentation, use the <example> tag at same level as
<para>, not inside it.
This improves the generated manpages.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
At fork time the .data and .bss segments of the Cygwin DLL are copied
over to the child process. This also copies the strace timer since
it's in the .bss segment so far. Fix that by moving the strace timer
out into the .data_cygwin_nocopy segment.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The _reent members _current_category and _current_locale are not
used at all. _current_locale is set to "C" in various points of
the code but its value is just as unused as _current_category.
This patch redefines these members without changing the size of the
structure to allow for an implementation of per-thread locales per
POSIX-1.2008 (i.e. uselocale and usage of the per-thread locale in
subsequent function calls).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
set_entry_point_break() uses GetModuleInformation to fetch the
address of the exe's entry point. However, just as with
lpStartAddress from the CREATE_PROCESS_DEBUG_EVENT event, the
returned address is only computed from the PE file header. It's
not actually the entry point in memory, if the executable is
relocated (ASLR). See
https://msdn.microsoft.com/en-us/library/windows/desktop/ms684229(v=vs.85).aspx
Convert this to using the info from CREATE_PROCESS_DEBUG_EVENT
combined with the offset from the PE file header's AddressOfEntryPoint
to deal with relocation.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
So far ldd terminates the inferior process as soon as some thread
is started. Apparently threads are started from even ntdll.dll
before the main thread of the application is started. As a result
the dll list is cut short since ldd terminates prematurely.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Commit b1b46d45 introduced a regression. After redefining FIONREAD
as part of restructuring newlib/Cygwin headers, the call to ioctlsocket
in the FIONREAD branch of fhandler_socket::ioctl should have been
changed to use the Winsock definition of FIONREAD, which I neglected.
This only affects 64 bit Cygwin.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In get_mem_values we open the process without PROCESS_VM_READ access
and are *still* able to request working set information, despite
MSDN claiming we need it for this purpose. Instead of adding this
access right, just add an comment to point this out for now.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Using PROCESS/THREAD_QUERY_INFORMATION may limit the number of
processes/threads we can inspect depending on their integrity level.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Always create child user window station and desktop, unless only
spawning with restricted token. Also fix formatting of a few comments
in child_info_spawn::worker.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Convert sys_privs to const struct with TOKEN_PRIVILEGES layout.
Drop function get_system_priv_list. Just use pointer to sys_privs.
Dropping max_sys_priv from wincaps requires to make sure that the
bitfield is 8 byte aligned on x86_64, otherwise gcc (5.3 only?)
apparently breaks access to the bitfield (off by 4 bytes).
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen
Johannes Schindelin
Erik M. Bray
Jon Turney
Sebastian Huber
Ken Brown
Michael Haubenwallner
Yaakov Selkowitz
David Wohlferd
Ray Donnelly
Erik Bray
Eric Blake