Previously, three similar callback fuctions were used in console
code. This patch unifies these functions to ease maintenance cost.
Fixes: 8aad3a7ede ("Cygwin: console: Fix a problem that minor ID is incorrect in ConEmu.")
Suggested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
- Basically maintain a hidden DIR* inside fhandlers.
- lseek has to be tweaked to allow basic seeking on the directory
descriptor.
- the current implementation does not keep the dir positions
between duplicated descriptor in sync. In fact, every descriptor
keeps its own copy of the DIR* and after dup/fork/exec, the
directory position is reset to 0, i. e., to the start of the
directory, as if rewinddir() has been called on the new descriptors.
While this behaviour isn't yet covered by the Issue 8 draft,
a bug report along these lines exists and will probably be
picked up for TC1.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The content of DIR should never have been exposed into userspace.
Move struct __DIR to local dirent.h and only keep forward declaration
in exported dirent.h.
This allows to tweak the structure in future, for instance, to
add thread-safety.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- drop appending .exe.lnk to files
- drop exe_suffixes, it's the same as stat_suffixes for a long time
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Provide the same debugging opportunities for api_fatal() as we do for a
core-dumping signal:
1) Break into any attached debugger
2) Start JIT debugger (if configured) (keeping these under DEBUGGING doesn't seem helpful)
3) Write a coredump (if rlim_core > 1MB)
4) Write a stackdump (if that failed, or 0 < rlim_core <= 1MB)
Pre-format a command to be executed on a fatal error to run 'dumper'
(using an absolute path).
Factor out executing a pre-formatted command, so we can use that for
invoking the JIT debugger in try_to_debug() (if error_start is present
in the CYGWIN env var) and to invoke dumper when a fatal error occurs.
On a fatal error, if the core file size limit is greater than 1MB,
invoke dumper to write a core dump. Otherwise, if that limit is greater
than 0, write a .stackdump file, as previously.
Adjust and clarify the associated documentation.
Also: Fix so that the error_start JIT debugger is now invoked, even when
ulimit -c is zero.
Also: Fix uses of console_printf() inside exec_prepared_command(). It's
output is written via the Windows console device, so needs to use
Windows-style line endings.
Also: consistently return non-zero from try_to_debug() if we debugged.
Future work: Truncate or remove the file written, if it exceeds the
maximum size set by the ulimit.
Future work: Using the words "fatal error" could probably be improved
on. This means exiting on one of the "certain signals whose default
action is to cause the process to terminate and produce a core dump
file".
Given that SSDs don't have a seek penalty, we can enable
automatic sparsifying of files on SSDs, even if the "sparse"
mount option is not set.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
In preparation of using the FileFsSectorSizeInformation info class,
add a couple of missing definitions.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Split fhandler_disk_file::fallocate into multiple methods, each
implementing a different aspect of fallocate(2), thus adding
FALLOC_FL_PUNCH_HOLE and FALLOC_FL_ZERO_RANGE handling.
For more correctly implementing posix_fallocate(3) semantics, make
sure to re-allocate holes in the given range if the file is sparse.
While at it, change the way checking when to make a file sparse.
The rule is now, make file sparse if the hole created by the action
spans at least one sparse block, taking the allocation granularity
of sparse files into account.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
also, take mode flags parameter instead of just a bool.
Introduce __FALLOC_FL_TRUNCATE mode flag as internal flag to
indictae being called from ftruncate(2).
This is in preparation of an upcoming change introducing the
Linx-specific fallocate(2) call.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The new directories '/dev/disk/by-label' and '/dev/disk/by-uuid'
provide symlinks for each disk related volume label and serial
number:
'VOLUME_LABEL' -> '../../sdXN'
'VOLUME_SERIAL' -> '../../sdXN'
Signed-off-by: Christian Franke <christian.franke@t-online.de>
The new directory '/dev/disk/by-drive' provides symlinks for each
disk related drive letter:
'x' -> '../../sdXN'
The new directory '/dev/disk/by-voluuid' provides symlinks for each
disk related storage volume:
'MBR_SERIAL-OFFSET' -> '../../sdXN'
'VOLUME_GUID' -> '../../sdXN'
Both directories provide Windows specific information and do not
exist on Linux.
Signed-off-by: Christian Franke <christian.franke@t-online.de>
The new directory '/dev/disk/by-partuuid' provides symlinks for each
MBR or GPT disk partition:
'MBR_SERIAL-OFFSET' -> '../../sdXN'
'GPT_GUID' -> '../../sdXN'
Signed-off-by: Christian Franke <christian.franke@t-online.de>
The new directory '/dev/disk/by-id' provides symlinks for each
disk and its partitions:
'BUSTYPE-[VENDOR_]PRODUCT_SERIAL[-partN]' -> '../../sdX[N]'.
This is based on strings provided by STORAGE_DEVICE_DESCRIPTOR.
If this information is too short, a 128-bit hash of the
STORAGE_DEVICE_UNIQUE_IDENTIFIER raw data is added.
Administrator privileges are not required.
Signed-off-by: Christian Franke <christian.franke@t-online.de>
MSFT NFSv3 fakes DOS attributes based on file type and permissions.
Rather than just faking FILE_ATTRIBUTE_DIRECTORY for dirs, fetch the
"real" DOS attributes returned by NFS.
This allows to handle the "R/O" attribute on shortcut files and thus
reading and creating device shortcut files on NFS.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
With this patch, the response time of select()/poll() has been
improved by utilizing semaphore (select_sem) just like pipe and
fifo. In addition, notification of exceptional conditions has
been added.
Fixes: 2c06014f12 ("Cygwin: dsp: Implement select()/poll().")
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Previously, sound device /dev/dsp did not support select()/poll().
These have been implemented with this patch.
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
This patch adds implementation of OSS-based sound mixer device. This
allows applications to change the sound playing volume.
NOTE: Currently, the recording volume cannot be changed.
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Before commit 44f73c5a62 ("Cygwin: Fix segfalt when too many command
line args are specified.") we had no actual argument size limit, except
for the fact that the child process created another copy of the argv
array on the stack, which could result in a stack overflow and a
subsequent SEGV. Commit 44f73c5a62 changed that by allocating the
additional argv array via malloc, and it introduced a new SC_ARG_MAX
limit along the lines of the typical Linux limit.
However, this new limit is artificial. Cygwin allocates all argument
and environment data on the cygheap. We only run out of ARG_MAX space
if we're out of memory resources.
Change argument size handling accordingly:
- Drop the args size check from child_info_spawn::worker.
- Return -1 from sysconf (SC_ARG_MAX), i. e., the argument size limit
is undefined.
- Change argv handling in class av, so that a failing cmalloc is not
fatal. This allows the parent process to return E2BIG if it's out
of cygheap resources.
- In the child, add a check around the new malloc call, so that it
doesn't result in a SEGV if the child process gets unexpectedly into
an ENOMEM situation at this point. In this (unlikely) case, proceed
with the original __argv array instead. Add comment to explain why.
Fixes: 44f73c5a62 ("Cygwin: Fix segfalt when too many command line args are specified.")
Tested-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Previously, the number of command line args was not checked for
cygwin process. Due to this, segmentation fault was caused if too
many command line args are specified.
https://cygwin.com/pipermail/cygwin/2023-August/254333.html
Since char *argv[argc + 1] is placed on the stack in dll_crt0_1(),
STATUS_STACK_OVERFLOW occurs if the stack does not have enough
space.
With this patch, char *argv[] is placed in heap instead of stack
and ARG_MAX is increased from 32000 to 2097152 which is default
value of Linux. The argument length is also compared with ARG_MAX
and spawnve() returns E2BIG if it is too long.
Reported-by: Ed Morton
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
After the commit fbfea31dd9, switch_to_nat_pipe is not cleared
properly when non-cygwin app is terminated in the case where the
pseudo console is disabled. This is because get_winpid_to_hand_over()
sometimes returns PID of cygwin process even though it should return
only PID of non-cygwin process. This patch fixes the issue by adding
a new argument which requests only PID of non-cygwin process to
get_console_process_id().
Fixes: fbfea31dd9 ("Cygwin: pty: Avoid cutting the branch the pty master is sitting on.")
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Previously, though readahead buffer handling in pty master was not
fully thread-safe, accept_input() was called from peek_pipe() thread
in select.cc. This caused the problem reported in:
https://cygwin.com/pipermail/cygwin/2023-July/253984.html
The mechanism of the problem is:
1) accept_input() which is called from peek_pipe() thread calls
eat_readahead(-1) before reading readahead buffer. This allows
writing to the readahead buffer from another (main) thread.
2) The main thread calls fhandler_pty_master::write() just after
eat_readahead(-1) was called and before reading the readahead
buffer by accept_input() called from peek_pipe() thread. This
overwrites the readahead buffer.
3) The read result from readahead buffer which was overwritten is
sent to the slave.
This patch makes readahead buffer handling fully thread-safe using
input_mutex to resolve this issue.
Fixes: 7b03b0d8ce ("select.cc (peek_pipe): Call flush_to_slave whenever we're checking for a pty master.")
Reported-by: Thomas Wolff <towo@towo.net>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Add uchar.h accordingly.
For the c32 functions, use the internal functions wirtomb and mbrtowi
as base, and convert wirtomb and mbrtowi to inline functions calling
the c32 functions.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
While st_rdev returned by fstat() for /dev/tty should be FH_TTY,
the current cygwin1.dll returns FH_PTYS+minor or FH_CONS+minor.
Similarly, fstat() does not return correct value for /dev/console,
/dev/conout, /dev/conin or /dev/ptmx.
This patch fixes the issue by:
1) Introduce dev_referred_via in fhandler_termios.
2) Add new argument, which has dev_t value referred by open(),
for constructors of fhandler_pty_slave and fhandler_pty_master to
set the value of dev_referred_via.
3) Set st_rdev using dev_referred_via in fhandler_termios::fstat()
if it is available.
Reviewed-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
This solves redefinition of FILE_CS_FLAG_CASE_SENSITIVE_DIR in winnt.h
and fixes the following compiler errors
ntdll.h:523:3: error: expected identifier before numeric constant
523 | FILE_CS_FLAG_CASE_SENSITIVE_DIR = 0x01
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ntdll.h:522:1: note: to match this ‘{’
522 | {
| ^
This patch hails from Git for Windows (where the Cygwin runtime is used
in the form of a slightly modified MSYS2 runtime), where it is a
well-established technique to let the `$HOME` variable define where the
current user's home directory is, falling back to `$HOMEDRIVE$HOMEPATH`
and `$USERPROFILE`.
The idea is that we want to share user-specific settings between
programs, whether they be Cygwin, MSYS2 or not. Unfortunately, we
cannot blindly activate the "db_home: windows" setting because in some
setups, the user's home directory is set to a hidden directory via an
UNC path (\\share\some\hidden\folder$) -- something many programs
cannot handle correctly, e.g. `cmd.exe` and other native Windows
applications that users want to employ as Git helpers.
The established technique is to allow setting the user's home directory
via the environment variables mentioned above: `$HOMEDRIVE$HOMEPATH` or
`$USERPROFILE`. This has the additional advantage that it is much
faster than querying the Windows user database.
Of course this scheme needs to be opt-in. For that reason, it needs
to be activated explicitly via `db_home: env` in `/etc/nsswitch.conf`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Update the list of filesystem flags to the flags supported since
Windows 7. Make sure to use the new flags only with Windows
filesystems, not with 3rd party filesystems.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This patch replaces ctty constants with more descriptive macros
(CTTY_UNINITIALIZED and CTTY_RELEASED) rather than -1 and -2 as
well as checking sign with CTTY_IS_VALID().
Fixes: 3b7df69aaa (Cygwin: ctty: Add comments for the special values: -1 and -2.)
Suggested-by: Corinna Vinschen <corinna@vinschen.de>
Signed-off-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Deviation from standard: If the input is broken, the output will be
broken. I. e., we just copy the current byte over into the wint_t
destination and try to pick up on the next byte. This is in line
with the way fnmatch works.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Effectively revert commit 57bac33359. The fact that the
devanagari modifier was called devanagar (missing the trailing 'i')
is a result of `locale -av' shortening the locale name to a maximum
of 15 characters.
D'oh. I guess we need a better way to do this...
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Generate lc_def_codeset.h header containing the default mapping from
locale to codeset on Linux. Use this mapping in __set_charset_from_locale
in the first place.
For every locale not covered by this table, just map Windows codepages
to equivalent codesets used on Linux/Unix, getting rid of LCIDs entirely.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
g_Ctoc, converting the UTF-32 filenames to multibyte, still
used UTF-16 to multibyte conversion. Introduce a wirtomb
helper and fix that.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Allow the [.<sym>.] expression
This requires a string comparision rather than a character
comparison. Introduce and use __wscollate_range_cmp.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
lc_collelem.h: autogenerated table of collating element, taken
from glibc
is_unicode_coll_elem: Check if a UTF-32 string is a collating element
next_unicode_char: return length of prefix from a string constituting
a complete character in the current locale, taking
collating elements into acocunt.
wcintowcs: convert UTF-16 to UTF-32 string
wcilen: return number of characters in a UTF-32 string
wcincmp: compare two fixed-size UTF-32 strings
Used in followup patches introducing collating symbols
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=179721
After FreeBSD eventually picked up the bugreport from within
only 5 years, rename __collate_range_cmp to __wcollate_range_cmp
as suggested all along, and make it type safe (wint_t instead of
wchar_t for hopefully obvious reasons...)
While at it, drop __collate_load_error and fix the checks for
it in glob and fnmatch.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
is_unicode_equiv compares two UTF-32 values and returns 1 if
both are member of the same Unicode equivalence class, 0 otherwise.
Note that this function only works with precomposed characters
per Unicode normalization form C. It doesn't handle decomposed
characters, just like its counterpart in glibc. I.e., equivalence
class comparison using decomposed chars won't work. Example:
fnmatch("[=n=]", "ñ") == 0
fnmatch("[=ñ=]", "n") == 0
but
fnmatch("[=n=]", "n\x0303") == 1
fnmatch("[=n\x0303=]", "n") == 1
fnmatch("[=n\x0303=]", "n\x0303") == 1
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Given how UTF-16 isn't capable to hold all Unicode chars in a single
wchar_t, we need a function returning a wint_t value representing
a UTF-32 value for comparison functions. Fortunately the important
wide character functions like towupper/towlower, isw<class>, iswctype,
etc, already take wint_t values and newlib handles them as UTF-32.
If only we had switched wchar_t to 32 bit way back when... sigh.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Takashi Yano
Corinna Vinschen
Jon Turney
Christian Franke
Brian Inglis
Biswapriyo Nath
Johannes Schindelin