A recent patch introduced new code for sig2str/str2sig.
This code does not properly exclude code that requires
SIGRTMIN/SIGRTMAX to be defined and triggers the following
compile error:
newlib/libc/signal/sig2str.c:199:8: error: 'SIGRTMIN' undeclared
newlib/libc/signal/sig2str.c:200:29: error: 'SIGRTMAX' undeclared
Let's add the missing guards.
Fixes: 2b50ec0cd2 ("libc: Fix compilation for new sig2str/str2sig implementation")
Signed-off-by: Christoph Muellner <cmuellner@gcc.gnu.org>
Added implementations for sig2str() and str2sig() in libc/signal
in order to improve POSIX compliance. Added fucntion prototypes
in libc/include/sys/signal.h.
If a service is supported as TCP and UDP service, GetAddrInfo does not
return two entries, one for TCP, one for UDP, as on Linux. Rather, it
just returns a single entry with ai_socktype and ai_protocol set to 0.
If the service only exists as TCP or UDP service, then ai->ai_socktype
is set, but ai_protocol isn't.
Fortunately we copy over the result from Windows into local storage
anyway, so this patch adds code to fix up the fields neglected by
Windows. In case ai_socktype as well as ai_protocol are 0, duplicate
the entry with valid values for ai_socktype and ai_protocol.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
If an interface is disconnected, net.cc:get_ifs tries to fetch IPv4
addresses from the registry. If it fails, it currently returns
pointers to sockaddr structs with zero address. Return a NULL pointer
instead, to signal the caller of getifaddrs that we do not have a
valid struct sockaddr.
Partially addresses: https://cygwin.com/pipermail/cygwin/2021-July/248970.html
riscv64-unknown-elf-g++-11.1.0 regression suite reports the following
failures for
$ make check-gcc-c++ RUNTESTFLAGS='dg.exp=Wstringop-overflow-6.C'
```
FAIL: g++.dg/warn/Wstringop-overflow-6.C -std=gnu++14 (test for excess errors)
FAIL: g++.dg/warn/Wstringop-overflow-6.C -std=gnu++17 (test for excess errors)
FAIL: g++.dg/warn/Wstringop-overflow-6.C -std=gnu++2a (test for excess errors)
UNSUPPORTED: g++.dg/warn/Wstringop-overflow-6.C -std=gnu++98
```
The "excess errors" being
```
output is In file included from /home/maxim/prj/riscv-upstream/install/riscv64-unknown-elf/include/wchar.h:6,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/cwchar:44,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/bits/postypes.h:40,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/iosfwd:40,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/ios:38,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/ostream:38,
from /home/maxim/prj/riscv-upstream/build/gcc-stage2/riscv64-unknown-elf/libstdc++-v3/include/iostream:39,
from /home/maxim/prj/riscv-upstream/gcc-11.1.0/gcc/testsuite/g++.dg/warn/Wstringop-overflow-6.C:6:
/home/maxim/prj/riscv-upstream/install/riscv64-unknown-elf/include/sys/reent.h:685:11: warning: unnecessary parentheses in declaration of '_sig_func' [-Wparentheses]
```
It appears to be the case that NtQueryTimer can return a negative time
remaining for an unsignalled timer. The value appears to be less than
the timer resolution.
Signed-off-by: David Allsopp <david.allsopp@metastack.com>
DWORD has different types on 32 and 64 bit. Use a common cast to
unsigned long to use %lu format for DWORD values throughout.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
cc Aldy Hernandez <aldyh@redhat.com> and Andrew MacLeod <amacleod@redhat.com>,
they are author of new VRP analysis for GCC, just to make sure I didn't
mis-understanding or mis-interpreting anything on GCC site.
GCC 11 have better value range analysis, that give GCC more confidence
to perform more aggressive optimization, but it cause scalbn/scalbnf get
wrong result.
Using scalbn to demostrate what happened on GCC 11, see comments with VRP
prefix:
```c
double scalbn (double x, int n)
{
/* VRP RESULT: n = [-INF, +INF] */
__int32_t k,hx,lx;
...
k = (hx&0x7ff00000)>>20;
/* VRP RESULT: k = [0, 2047] */
if (k==0) {
/* VRP RESULT: k = 0 */
...
k = ((hx&0x7ff00000)>>20) - 54;
if (n< -50000) return tiny*x; /*underflow*/
/* VRP RESULT: k = -54 */
}
/* VRP RESULT: k = [-54, 2047] */
if (k==0x7ff) return x+x; /* NaN or Inf */
/* VRP RESULT: k = [-54, 2046] */
k = k+n;
if (k > 0x7fe) return huge*copysign(huge,x); /* overflow */
/* VRP RESULT: k = [-INF, 2046] */
/* VRP RESULT: n = [-INF, 2100],
because k + n <= 0x7fe is false, so:
1. -INF < [-54, 2046] + n <= 0x7fe(2046) < INF
2. -INF < [-54, 2046] + n <= 2046 < INF
3. -INF < n <= 2046 - [-54, 2046] < INF
4. -INF < n <= [0, 2100] < INF
5. n = [-INF, 2100] */
if (k > 0) /* normal result */
{SET_HIGH_WORD(x,(hx&0x800fffff)|(k<<20)); return x;}
if (k <= -54) {
/* VRP OPT: Evaluate n > 50000 as true...*/
if (n > 50000) /* in case integer overflow in n+k */
return huge*copysign(huge,x); /*overflow*/
else return tiny*copysign(tiny,x); /*underflow*/
}
k += 54; /* subnormal result */
SET_HIGH_WORD(x,(hx&0x800fffff)|(k<<20));
return x*twom54;
}
```
However give the input n = INT32_MAX, k = k+n will overflow, and then we
expect got `huge*copysign(huge,x)`, but new VRP optimization think
`n > 50000` is never be true, so optimize that into `tiny*copysign(tiny,x)`.
so the solution here is to moving the overflow handle logic before `k = k + n`.
These are updates to wire into the build tree the new tools profiler and
gmondump, and to supply documentation for the tools.
The documentation for profiler and ssp now mention each other but do not
discuss their similarities or differences. That will be handled in a
future update to the "Profiling Cygwin Programs" section of the Cygwin
User's Guide, to be supplied.
This new tool was formerly part of 'profiler' but was spun out thanks to
Jon T's reasonable review comment. Gmondump is more of a debugging tool
than something users might have need for. Users would more likely use
gprof to make use of symbolic info like function names and source line
numbers.
The new tool formerly known as cygmon is renamed to 'profiler'. For the
name I considered 'ipsampler' and could not think of any others. I'm open
to a different name if any is suggested.
I decided that a discussion of the pros and cons of this profiler vs the
existing ssp should probably be in the "Profiling Cygwin Programs" section
of the Cygwin User's Guide rather than in the help for either. That
material will be supplied at some point.
CONTEXT buffers are made child-specific and thus thread-specific since
there is one profiler thread for each child program being profiled.
The SetThreadPriority() warning comment has been expanded.
chmod() works on Cygwin so the "//XXX ineffective" comment is gone.
I decided to make the "sample all executable sections" and "sample
dynamically generated code" suggestions simply expanded comments for now.
The profiler program is now a Cygwin exe rather than a native exe.
The Linux man page for cfsetspeed(3) specifies that the speed argument
must be one of the constants Bnnn (e.g., B9600) defined in termios.h.
But Linux in fact allows the speed to be the numerical baud rate
(e.g., 9600). For consistency with Linux, we now do the same.
Addresses: https://cygwin.com/pipermail/cygwin/2021-July/248887.html
- GCC will set __FLT_EVAL_METHOD__ to 16 if __fp16 supported, e.g.
cortex-a55/aarch64.
- $ aarch64-unknown-elf-gcc -v 2>&1 |grep version
gcc version 9.2.0 (GCC)
- $ aarch64-unknown-elf-gcc -E -dM -mcpu=cortex-a55 - < /dev/null |grep FLT_EVAL_METHOD
#define __FLT_EVAL_METHOD__ 16
#define __FLT_EVAL_METHOD_TS_18661_3__ 16
#define __FLT_EVAL_METHOD_C99__ 16
- The behavior of __FLT_EVAL_METHOD__ == 16 is same as
__FLT_EVAL_METHOD__ == 0 except for float16_t, but newlib didn't
support float16_t.
ISO/IEC TS 18661-3:
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2405.pdf
V2 Changes:
- List Howland, Craig D as co-author since he provide the draft of comment
in math.h.
Co-authored-by: "Howland, Craig D" <howland@LGSInnovations.com>
The default PSAPI_VERSION is controlled by WIN32_WINNT, which we set to
0x0a00 when building utils since 48a76190 (and is the default in w32api
>= 9.0.0)
In order for the built executables to run on Windows Vista, we must also
define PSAPI_VERSION as 1 (otherwise '#define GetModuleFileNameExA
K32GetModuleFileNameExA' causes a 'The procedure entry point
K32GetModuleFilenameExA could not be located in the dynamic link library
kernel32.dll' error at run time).
Also drop uneeded psapi.h from dlfcn.cc (31ddf45d), resource.cc
(34a6eeab) and ps.cc (1def2148).
Use <cmdsynopsis> element markup in utils docbook documentation, rather
than some preformatted text inside <screen>.
(This didn't happen as part of 646745cb, when we first started using
refentry elements to make it possible to generate manpages)
This helps produce better looking manpages:
* uses bold (for command names) and italic (for replaceable items)
* different output formats inconsistently treat tabs inside <screen>
(so we have to be careful to not use them in that preformatted text)
Also clean up various issues:
* Replace '[OPTIONS]' with a real synopsis of the options
* Consistently use 'ITEM...' rather than 'ITEM1 [ITEM2...]' for an item
which should appear 1 or more times (cygcheck -f, getfacl, kill)
* Consistently document the '-h | -V' invocation form
* Since replaceable items are now marked up so they have some formatting
indicating they are replaceable, we can drop wrapping them in angle
brackets, as is done in some places
* Add missing '-W' and '-p PID' options to ps synopsis
* Adjust cygpath synopsis to show that only one 'System information'
option is allowed, possibly modified by -A
Future work:
* Sync up the actual help emitted by the util, where it's been improved
* Also don't use <screen> for formatting 'OPTIONS' section of manpage
* pldd inconsistently uses '-?' rather than '-h'!
* Drop duplicate 'Options:' headers (mkgroup, mkpassword)
* Add missing indication that MACHINE is optional with -L (mkgroup, mkpassword)
* Tweak some <refpurpose> which try to be a synopsis, rather than a decription (passwd, ssp)
* Drop some stray '\n' in setfacl options
* Move 'Original Author' note in ssp to an AUTHORS section
* Use <para> to improve formatting of tzset manpage
The C standard says that errno may acquire the value ERANGE if the
result from strtod underflows. According to IEEE 754, underflow occurs
whenever the value cannot be represented in normalized form.
Newlib is inconsistent in this, setting errno to ERANGE only if the
value underflows to zero, but not for denorm values, and never for hex
format floats.
This patch attempts to consistently set errno to ERANGE for all
'underflow' conditions, which is to say all values which are not
exactly zero and which cannot be represented in normalized form.
This matches glibc behavior, as well as the Linux, Mac OS X, OpenBSD,
FreeBSD and SunOS strtod man pages.
Signed-off-by: Keith Packard <keithp@keithp.com>
xterm 368 and mintty 3.5.1 implement a new feature to support
notification of terminal scaling via font zooming also if the terminal
text dimensions (rows/columns) stay unchanged, using
ioctl(TIOCSWINSZ), raising SIGWINCH;
this patches cygwin to support that scenario
The new GetFinalPathNameW handling for native symlinks in inner path
components is disabled if caller doesn't want to follow symlinks, or
doesn't want to follow reparse points.
visium and iq2000 have libgloss configure bits that reference
target_makefile_frag, but it's never set. This leads to failures during the
configure process and an empty libgloss/<target>/Makefile. Naturally bad
things happen with an empty Makefile.
This patch initializes target_makefile_frag for both targets in their
configure.in files and updates the generated configure files. This fixes the
build failures. I've been using it in my tester for about a week and both
targets have flipped from consistently failing to consistently passing.
* libgloss/visium/configure.in (target_makefile_frag): Define.
* libgloss/visium/configure: Regenerated.
* libgloss/iq2000/configure.in (target_makefile_frag): Define.
* libgloss/iq2000/configure: Regenerated.
The scanf code was skipping the '0' after the 'x' causing the
resulting buffer to contain an invalid number when passed to strtod.
Signed-off-by: Keith Packard <keithp@keithp.com>
Christoph Muellner
Corinna Vinschen
Matt Joyce
Jon Turney
Ken Brown
Maxim Blinov
David Allsopp
Alex White
Kito Cheng
Mark Geisert
Keith Packard
Thomas Wolff
Jeremy Drake
Jeff Law
Brian Inglis
Takashi Yano
Thomas Wolff
Stafford Horne
Jonathan Wakely
Joel Sherrill