Define FD_SETSIZE (<sys/select.h>) to be 1024 by default, and define
NOFILE (<sys/param.h>) to be OPEN_MAX (== 3200) by default.
Remove the comment in <sys/select.h> that FD_SETSIZE should be >=
NOFILE.
Bump API minor.
Addresses: https://cygwin.com/pipermail/cygwin/2022-July/251839.html
This reverts commit 1f8f7e2d54, "* libc/stdio/refill.c (__srefill):
Try again after EOF on Cygwin." If EOF is set on a file, the stdio
input functions will now immediately return EOF rather than trying
again to read. This aligns Cygwin's behavior to that of Linux.
Addresses: https://cygwin.com/pipermail/cygwin/2022-June/251672.html
A recent patch fixed gmondump to stop printing "0x0x" as an address
prefix. It turns out the Cygwin User's Guide and the gmondump and
ssp man pages (all from utils.xml) have examples of the same error.
Unless make is invoked with V=1, have xmlto pass the parameter
'man.output.quietly=1' to xsltproc to suppress "Note: Writing foo.N"
output from the manpages stylesheet.
Unless make is invoked with V=1, have xmlto pass the parameter
'chunk.quietly=1' to xsltproc to suppress "Writing foo.html for
sect1(foo)" output from the chunker.xsl stylesheet.
Unless make is invoked with V=1, have xmlto pass '-q' to dblatex when
building PDFs, to supress repeated "default template used in
programlisting or screen" warnings from dblatex's verbatim.xsl
stylesheet.
Drop mention of 32-bit installer, since it's offically discouraged, and
planned to be dropped soon.
Adjust various references to be something more generic, like 'the Cygwin
Setup program' to accommodate this.
Add patch, and make cocom unconditional in list of build prerequisites.
Even though the products of these tools are checked in, these tools are
required when building in a fresh git checkout, presumably due to the
order in which git creates the files resulting in timestamps which
indicate that the output of rules using these tools are older than
the inputs.
Addresses: https://cygwin.com/pipermail/cygwin/2021-December/250124.html
Also drop a duplicate sentence about 'fetch sources from git'.
Add a configure option '--disable-doc' to disable building of the
documentation by the 'all' target.
Check for the required tools at configure time, and require them if
building documentation is enabled.
Even if building the documentation was diabled with '--disable-doc',
'make -C doc' at the top-level can still make the documentation, if the
documentation tools were found. If the tools were not found, 'missing'
is used to issue a warning about that.
Update instructions for building Cygwin appropriately.
(Building documentation remains the default to increase the chances of
noticing when building the documentation is broken.)
The doc for gmondump says 1 or more FILENAME are expected, but 0 is
handled. That's an oversight. Make invocation with 0 FILENAMEs print a
one-line help message.
Reword the beginning of profiler's description doc to clarify target's
child processes are run but only optionally profiled.
These are updates to wire into the build tree the new tools profiler and
gmondump, and to supply documentation for the tools.
The documentation for profiler and ssp now mention each other but do not
discuss their similarities or differences. That will be handled in a
future update to the "Profiling Cygwin Programs" section of the Cygwin
User's Guide, to be supplied.
The Linux man page for cfsetspeed(3) specifies that the speed argument
must be one of the constants Bnnn (e.g., B9600) defined in termios.h.
But Linux in fact allows the speed to be the numerical baud rate
(e.g., 9600). For consistency with Linux, we now do the same.
Addresses: https://cygwin.com/pipermail/cygwin/2021-July/248887.html
Use <cmdsynopsis> element markup in utils docbook documentation, rather
than some preformatted text inside <screen>.
(This didn't happen as part of 646745cb, when we first started using
refentry elements to make it possible to generate manpages)
This helps produce better looking manpages:
* uses bold (for command names) and italic (for replaceable items)
* different output formats inconsistently treat tabs inside <screen>
(so we have to be careful to not use them in that preformatted text)
Also clean up various issues:
* Replace '[OPTIONS]' with a real synopsis of the options
* Consistently use 'ITEM...' rather than 'ITEM1 [ITEM2...]' for an item
which should appear 1 or more times (cygcheck -f, getfacl, kill)
* Consistently document the '-h | -V' invocation form
* Since replaceable items are now marked up so they have some formatting
indicating they are replaceable, we can drop wrapping them in angle
brackets, as is done in some places
* Add missing '-W' and '-p PID' options to ps synopsis
* Adjust cygpath synopsis to show that only one 'System information'
option is allowed, possibly modified by -A
Future work:
* Sync up the actual help emitted by the util, where it's been improved
* Also don't use <screen> for formatting 'OPTIONS' section of manpage
* pldd inconsistently uses '-?' rather than '-h'!
* Drop duplicate 'Options:' headers (mkgroup, mkpassword)
* Add missing indication that MACHINE is optional with -L (mkgroup, mkpassword)
* Tweak some <refpurpose> which try to be a synopsis, rather than a decription (passwd, ssp)
* Drop some stray '\n' in setfacl options
* Move 'Original Author' note in ssp to an AUTHORS section
* Use <para> to improve formatting of tzset manpage
Allow multiple characters also in first '-mode' argument.
Use '-H' instead of '-h' for '--help' to fix ambiguity with
hidden attribute. Fix help and usage texts and documentation.
Signed-off-by: Christian Franke <christian.franke@t-online.de>
v2:
* Include tzmap.h in BUILT_SOURCES
* Make per-file flags appear after user-supplied CXXFLAGS, so they can
override optimization level.
* Correct .o files used to define symbols exported by libm.a
* Drop gcrt0.o mistakenly included in libgmon.a
* Add missing line continuations in GMON_FILES value
v3:
* use per-file flags for .c compilation
* override C{XX,}FLAGS, as they are set on the command line by top-level make
v4:
* Drop -Wno-error=write-strings from path_testsuite CXXFLAGS
v5:
* Update for changes in master
- Add -fno-threadsafe-statics to CXX flags
- Add hypotl.cc
- Remove fenv.cc (in favour of newlib), add fenv.c stub
- Add proc.5 manpage rules
change notes to see "Implementation Notes" to xref to std-notes;
add xref to std-notes to getrlimit, setrlimit;
add note to document limitations of getrlimit, setrlimit resources support
There's doesn't seem to be much use in independently distributing these
subdirectories, so allowing them to be independently configured seems
pointless and overcomplicated.
The order in which the subdirectories are built is still a little odd,
as cygwin is linked with libcygserver, and cygserver is then linked with
cygwin. So, we build the cygwin directory first, which invokes a build
of libcygserver in the cygserver directory, and then build in the
cygserver directory to build the cygserver executable.
Drop AC_CONFIGURE_ARGS, since we don't need to recursively call
configure with the same arguments anymore.
Slightly refine when we build utils: Previously we didn't build any
utils if MinGW compiler use was avoided, now we just avoid building
those utils which require that compiler.
Greatly simplify how winsup_srcdir and target_builddir are set, since
we're only configuring from one directory. (These are still kept
absolute, since we don't adjust them where used for being used in a
subdirectory).
Remove configure.cygwin and put it's (greatly reduced) contents inline
in the one place it's used now.
Remove generated configure and aclocal.m4 in subdirectories.
enumerate Vista, 7, 8, 10 progression to be clear, and earliest server 2008;
add 8.1, exclude S mode, add Cygwin32 on ARM, specify 64 bit only AMD/Intel
change all kinds of setup references to "the Cygwin Setup program";
emphasize 64 bit and deemphasize 32 bit;
update options list;
explain why installing everything is now extremely inadvisable, with stats
Use the (undocumented) MEMORY_WORKING_SET_EX_INFORMATION in dumper to
determine if a MEM_IMAGE region is unsharable, and hence has been
modified.
After this, we will end up dumping memory regions where:
- state is MEM_COMMIT (i.e. is not MEM_RESERVE or MEM_FREE), and
-- type is MEM_PRIVATE and protection allows reads (i.e. not a guardpage), or
-- type is MEM_IMAGE and attribute is non-sharable (i.e. it was WC, got
written to, and is now a RW copy)
Windows Explorer shows a warning with Cygwin-created DACLs, but putting
the text of the warning into Google doesn't lead to the relevant Cygwin
docs. Let's copy the warning text into the docs in the hopes of helping
confused users. Most of the credit for the wording belongs to Yaakov
Selkowitz.
Latest inquiry: <https://cygwin.com/pipermail/cygwin/2020-May/244814.html>
Signed-off-by: David Macek <david.macek.0@gmail.com>
The implicit assumption seemed to be that any subsequent occurence of
the same setting in nsswitch.conf is supposed to rewrite the previous
ones completely. This was not the case if the third or any further
schema was previously defined and the last line defined less than that
(but at least 2), for example:
```
db_home: windows cygwin /myhome/%U
db_home: cygwin desc
```
Let's document this behavior as well.
Signed-off-by: David Macek <david.macek.0@gmail.com>
The descriptions of symlink handling are a bit dated, so
revamp them and add the new WSL symlink type.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
WSL symlinks are reparse points containing a POSIX path in UTF-8.
On filesystems supporting reparse points, use this symlink type.
On other filesystems, or in case of error, fall back to the good
old plain SYSTEM file.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Treat WSL symlinks just like other symlinks. Convert
absolute paths pointing to Windows drives via
/mnt/<driveletter> to Windows-style paths <driveletter>:
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This option has been disabled long ago and nobody missed it.
Removing drops a bit of unneeded code
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- For programs which does not work properly with pseudo console,
disable_pcon in environment CYGWIN is introduced. If disable_pcon
is set, pseudo console support is disabled.
This patch supplies an implementation of the CPU_SET(3) processor
affinity macros as documented on the relevant Linux man page.
There is a mostly superset implementation of cpusets under newlib's
libc/sys/RTEMS/include/sys that has Linux and FreeBSD compatibility
and is built on top of FreeBSD bitsets. This Cygwin implementation
and the RTEMS one could be combined if desired at some future point.
This patch set implements the Linux syscalls sched_getaffinity,
sched_setaffinity, pthread_getaffinity_np, and pthread_setaffinity_np.
Linux has a straightforward view of the cpu sets used in affinity masks.
They are simply long (1024-bit) bit masks. This code emulates that view
while internally dealing with Windows' distribution of available CPUs among
processor groups.
libX11 provides <X11/Xlocale.h>. The build of libX11 itself adds
include/X11 to the compiler's include path. This results in a name
collision with /usr/include/xlocale.h on case-insensitive filesystems.
Commit 90e35b1eb3 renamed sys/_locale.h to xlocale.h in March 2017 under
the assumption that we should provide the locale_t type in the same file
as on Linux, FreeBSD, and Darwin.
A few weeks later (June 2017), glibc removed the xlocale.h file in favor
of bits/types/locale_t.h, which shouldn't be included directly anyway.
For reference and the reasoning, see
https://sourceware.org/git/?p=glibc.git;a=commit;h=f0be25b6336d
Given the above, revert 90e35b1eb3 and
fix additional usage of xlocale.h.
- feenableexcept,fedisableexcept, fegetexcept are GNU-only
- fegetprec, fesetprec are Solaris, use __MISC_VISIBLE
- _feinitialise is Cygwin-internal only
- Replace self-named FP precision values to values from
http://www.open-std.org/jtc1/sc22//WG14/www/docs/n752.htm
as used by Solaris.
- Change return value of fesetprec to adhere to the above document
and Solaris.
- Document fegetprec, fesetprec as Solaris functions, not as GNU
functions
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Inspecting the content of case-sensitive directories
on remote machines results in lots of errors like
disappearing diretories and files, file not found, etc.
This is not feasible as default behaviour
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Under WOW64 on 64 bit Windows 7, MsV1_0S4ULogon appears to be
unimplemented, probably under Vista as well. Re-enable
create_token method, to allow basic seteuid on W7 WOW64 and
Vista as well.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Jon Turney
Corinna Vinschen
Hamish McIntyre-Bhatty
Ken Brown
Christian Franke
Mark Geisert
Takashi Yano
Takashi Yano via Cygwin-patches
Brian Inglis
Thomas Wolff
Corinna Vinschen
Yaakov Selkowitz
Michael Haubenwallner