_my_tls.remove along with a comment.
(sigpacket::process): Remove code which now causes a gdb deadlock.
* sigproc.cc (_cygtls::signal_exit): Signal debugger with signal number
earlier.
for stuff".
* fhandler.cc (fhandler_base_overlapped::wait_overlapped): Use simplified arg
form of cygwait.
* fhandler_console.cc (fhandler_console::read): Ditto.
* fhandler_audio.cc (fhandler_dev_dsp::Audio_out::waitforspac): Ditto.
(fhandler_dev_dsp::Audio_in::waitfordata): Ditto.
* fhandler_fifo.cc (fhandler_fifo::wait): Ditto.
* fhandler_serial.cc (fhandler_serial::raw_read): Ditto.
(fhandler_serial::raw_write): Ditto.
* select.cc (cygwin_select): Ditto.
* sigproc.h (cygwait): Rename from cygWFMO. Define two argument and single
argument forms of this function.
* fhandler_tty.cc (fhandler_pty_slave::open): Use method to query if tty is
open.
(fhandler_pty_slave::read): Send SIGHUP when master is detected as closed.
(fhandler_pty_common::close): Close input_available_event in callers since
master may need to signal it first.
(fhandler_pty_master::close): Lie and set input_available_event when closing,
then close input_available_event.
(fhandler_pty_slave::close): Close input_available_event explicitly here.
* tty.h (tty::is_master_closed): Declare new method.
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* archures.c (bfd_mach_mips_octeon2): New macro
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsocteon2): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeon2.
* elfxx-mips.c (_bfd_elf_mips_mach): Support E_MIPS_MACH_OCTEON2.
(mips_set_isa_flags): Add bfd_mach_mips_octeon2.
(mips_mach_extensions): Add bfd_mach_mips_octeon2.
gas:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* tc-mips.c (CPU_IS_OCTEON): Add Octeon2.
(mips_cpu_info_table): Add Octeon2.
* doc/c-mips.texi: Document octeon2 as an acceptable value for -march=.
gas/testsuite:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* gas/mips/mips.exp: Add Octeon2 for an architecture.
Run octeon2 test.
* gas/mips/octeon2.d: New file.
* gas/mips/octeon2.s: New file.
include/opcode:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEON2.
(INSN_OCTEON2): New macro.
(CPU_OCTEON2): New macro.
(OPCODE_IS_MEMBER): Add Octeon2.
opcodes:
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add Octeon2.
For "octeon+", just include OcteonP for the insn.
* mips-opc.c (IOCT): Include Octeon2.
(IOCTP): Include Octeon2.
(IOCT2): New macro.
(mips_builtin_opcodes): Add "laa", "laad", "lac", "lacd", "lad",
"ladd", "lai", "laid", "las", "lasd", "law", "lawd".
Move "lbux", "ldx", "lhx", "lwx", and "lwux" up to where the standard
loads are, and add IOCT2 to them.
Add "lbx" and "lhux".
Add "qmac.00", "qmac.01", "qmac.02", "qmac.03", "qmacs.00",
"qmacs.01", "qmacs.01", "qmacs.02" and "qmacs.03".
Add "zcb" and "zcbt".
dynamically loaded since fork() doesn't work in that scenario anyway.
(dll_dllcrt0_1): Don't accommodate dynamically loaded dlls.
* exceptions.cc (ctrl_c_handler): Don't lock the process; there's too much risk
of deadlock.
* sigproc.cc (_cygtls::remove_wq): Don't try to remove anything from the waitq
if there is obviously nothing there.
* strace.cc (strace::activate): Allow stracing dynamically loaded cygwin1.dll.
(_cygtls::signal_exit): Close my_readsig via close_my_readsig(), avoiding
communication with the signal pipe.
(wait_sig): Close my_readsig via close_my_readsig().
(munlock): Ditto.
* ntdll.h: Rearrange to have all preprocessor definitions at the start
of the file. Add comments to each definition block.
(MAP_PROCESS): Rename from LOCK_VM_IN_WSL.
(MAP_SYSTEM): Rename from LOCK_VM_IN_RAM.
never remember what it stands for.
(sig_handle_tty_stop): Remove obsolete call to sig_handle_tty_stop.
(_cygtls::call_signal_handler): Rework to grab signal information from
_main_tls if none is set for _my_tls. Try harder to keep thread locked.
(reset_signal_arrived): Delete.
* fhandler.cc (fhandler_base_overlapped::wait_overlapped): Use new cygWFMO call
to wait for an event + standard cygwin stuff. Modify debug output to
acccomodate new function.
* fhandler_console.cc (fhandler_console::read): Replace WaitForMultipleObjects
with cygWFMO.
* fhandler_socket.cc (get_inet_addr): Add comment.
* gendef (_sigdelayed): Remove call to reset_signal_arrived.
* sigproc.cc (_cygtls::signal_exit): Don't close my_readsig here unless we're
in the signal thread.
(create_signal_arrived): Create signal_arrived as auto-reset so that only one
thread is woken when a signal arrives.
* sigproc.h (cygWFMO): New function.
(reset_signal_arrived): Delete declaration.
(munlock): Ditto.
(posix_madvise): Ditto.
* signal.cc: Remove obsolete sigcatchers stuff throughout.
(sigaction_worker): Add function name parameter and use it to show standard
syscall return value debugging output. Also add fault protection.
(sigaction): Accommodate extra argument to sigaction_worker.
(siginterrupt): Ditto.
* syscalls.cc (read): Remove obsolete sigcatchers stuff.
(readv): Ditto.
Throughout, change syscalls to report on return values using new %R format
option.
* smallprint.cc (__small_vsprintf): Add parsing for %R to report on return
values and possible errno from syscalls.
* errno.cc (errmap): Add PRIVILEGE_NOT_HELD.
* fhandler_tty.cc (fhandler_pty_master::setup): When creating a thread use
shorter name to reduce debuggging output.
* select.cc (start_thread_pipe): Ditto.
(start_thread_serial): Ditto.
(start_thread_socket): Ditto.
(start_thread_mailslot): Ditto.
* sigproc.cc (talktome): Ditto.
The common sim code provides a useful "get_string" function which reads
a C string out of the target's memory space. So rename and export it
for other people to use.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* cygpath.cc: Throughout, use cygwin_conv_path WIN_W rather than WIN_A
conversion.
(get_long_path_name_w32impl): Remove.
(get_long_name): Drop pre-Windows 2000 accommodations. Just call
GetLongPathNameW here directly.
(get_special_folder): Convert first parameter to WCHAR buffer pointer.
Drop conversion of result from WCHAR * to char *.
(do_sysfolders): Accommodate change to get_special_folder and only
convert result to char * last. Drop pre-Windows 2000 accommodations
and just call GetProfilesDirectoryW directly. Replace call to
GetWindowsDirectoryW with call to GetSystemWindowsDirectoryW.
Just call GetShortPathNameW directly.
(do_pathconv): Simplify buffer handling.
Allow all types of CCP conversions. Accommodate throughout.
(cygwin_conv_path): Use current ANSI or OEM codepage for WIN_A
conversions, depending on current file API codepage setting.
(cygwin_conv_path_list): Allow all CCP conversion types.
* include/sys/cygwin.h (CCP_CONVTYPE_MASK): Add to cygwin_conv_path_t
enum for convenience.
* mkpasswd.c: Ditto.
(psx_dir): Remove.
(current_user): Drop support for -m option. Use $HOME as is since it's
a POSIX path anyway.
(enum_users): Drop support for -m option.
(usage): Mention -m option as ignored.
(main): Drop support for -m option. Mark ignored options as deprecated.
* utils.sgml (mkpasswd): Remove description of -m option.
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips-dis.c (mips_arch_choices): Add Octeon+.
* mips-opc.c (IOCT): Include Octeon+.
(IOCTP): New macro.
(mips_builtin_opcodes): Add "saa" and "saad".
bfd/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* archures.c (bfd_mach_mips_octeonp): New macro.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c (I_mipsocteonp): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeonp.
* elfxx-mips.c (mips_set_isa_flags): Add bfd_mach_mips_octeonp.
(mips_mach_extensions): Add bfd_mach_mips_octeonp.
include/opcodes/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEONP.
(INSN_OCTEONP): New macro.
(CPU_OCTEONP): New macro.
(OPCODE_IS_MEMBER): Add Octeon+.
(M_SAA_AB, M_SAAD_AB, M_SAA_OB, M_SAAD_OB): New enum values.
gas/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* config/tc-mips.c (CPU_IS_OCTEON): New macro function.
(CPU_HAS_SEQ): Change to use CPU_IS_OCTEON.
(NO_ISA_COP): Likewise.
(macro) <ld_st>: Add support when off0 is true.
Add support for M_SAA_AB, M_SAA_OB, M_SAAD_OB and M_SAAD_AB.
(mips_cpu_info_table): Add octeon+.
* doc/c-mips.texi: Document octeon+ as an acceptable value for -march=.
gas/testsuite/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* gas/mips/mips.exp: Add octeon+ for an architecture.
Run octeon-saa-saad test.
(run_dump_test_arch): For Octeon architectures, also try octeon@.
* gas/mips/octeon-pref.d: Remove -march=octeon from command line.
* gas/mips/octeon.d: Likewise.
* gas/mips/octeon-saa-saad.d: New file.
* gas/mips/octeon-saa-saad.s: New file
Keith Marshall
Christopher Faylor
Andrew Pinski
Corinna Vinschen
Ulrich Weigand
Michael Frysinger
Chris Sutcliffe
DJ Delorie