be used by subsequent startup functions.
(dll_crt0_0): Issue a warning if DuplicateTokenEx fails and DEBUGGING.
(dll_crt0_1): Move user_data->{resourcelocks,threadinterface} initialization
here from dll_crt0_0.
* fork.cc (frok::child): Tell wait_for_sigthread that this is fork.
(frok::parent): Only initialize start_time once. Tighten time when we're
"deimpersonated".
* sigproc.cc (signal_fixup_after_exec): Rework (futiley) sa_buf stuff. Add
debugging output.
(wait_for_sigthread): Accept an argument which illustrates whether we are
forked or not.
(wait_sig): Avoid using myself pointer.
* winsup.h ((wait_for_sigthread): Reflect change to argument.
(fhandler_dev_floppy::get_drive_info): Rearrange so that now
NtQueryVolumeInformationFile is called on drives which don't support
IOCTL_DISK_GET_DRIVE_GEOMETRY.
* ntdll.h (struct _FILE_FS_SIZE_INFORMATION): Add.
(enum _FSINFOCLASS): Add missing values.
* signal.cc (_SA_NORESTART): New flag.
(sigaction_worker): New function, derived from sigaction. Don't set internal
flags unless called internally.
(sigaction): Use sigaction_worker.
(signal): Honor new _SA_NORESTART flag.
(siginterrupt): Set _SA_NORESTART flag appropriately. Use sigaction_worker to
set flags.
* include/cygwin/signal.h: Define _SA_INTERNAL_MASK here.
bfd/ChangeLog:
* reloc.c: Add BFD_RELOC_X86_64_GOT64, BFD_RELOC_X86_64_GOTPCREL64,
BFD_RELOC_X86_64_GOTPC64, BFD_RELOC_X86_64_GOTPLT64,
BFD_RELOC_X86_64_PLTOFF64.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* elf64-x86-64.c (x86_64_elf_howto_table): Correct comment.
Add howtos for above relocs.
(x86_64_reloc_map): Add mappings for new relocs.
(elf64_x86_64_check_relocs): R_X86_64_GOT64, R_X86_64_GOTPCREL64,
R_X86_64_GOTPLT64 need a got entry. R_X86_64_GOTPLT64 also a PLT
entry. R_X86_64_GOTPC64 needs a .got section. R_X86_64_PLTOFF64
needs a PLT entry.
(elf64_x86_64_gc_sweep_hook): Reflect changes from
elf64_x86_64_check_relocs for the new relocs.
(elf64_x86_64_relocate_section): Handle new relocs.
gas/ChangeLog:
* config/tc-i386.c (type_names): Correct placement of 'static'.
(reloc): Map some more relocs to their 64 bit counterpart when
size is 8.
(output_insn): Work around breakage if DEBUG386 is defined.
(output_disp): A BFD_RELOC_64 with GOT_symbol as operand also
needs to be mapped to BFD_RELOC_X86_64_GOTPC64 or
BFD_RELOC_X86_64_GOTPC32. Also x86-64 handles pcrel addressing
different from i386.
(output_imm): Ditto.
(lex_got): Recognize @PLTOFF and @GOTPLT. Make @GOT accept also
Imm64.
(md_convert_frag): Jumps can now be larger than 2GB away, error
out in that case.
(tc_gen_reloc): New relocs are passed through. BFD_RELOC_64
and BFD_RELOC_64_PCREL are mapped to BFD_RELOC_X86_64_GOTPC64.
gas/testsuite/ChangeLog:
* gas/i386/reloc64.s: Accept 64-bit forms.
* gas/i386/reloc64.d: Adjust.
* gas/i386/reloc64.l: Adjust.
include/ChangeLog:
* elf/x86-64.h: Add the new relocations with their official
numbers.
* dcrt0.cc (dll_crt0_0): Semi-revert 2006-03-14 change which moved pinfo_init
and uinfo_init here.
(dll_crt0_1): Ditto.
(__dll_crt0): Ditto. Don't call update_envptrs here.
(dll_crt0_1): Ditto. Move wait_for_sigthread call here from dll_crt0_0.
* environ.cc (environ_init): Call it here instead.
* sigproc.cc (my_readsig): New static variable.
(wait_for_sigthread): Set up read pipe here since we are assured that we have
the proper privileges when this is called.
(talktome): Eliminate second argument since it is available as a global now.
(wait_sig): Reflect use of my_readsig.
Daniel Jacobowitz <dan@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Zack Weinberg <zack@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
bfd/
* bfd-in2.h: Regenerate.
* config.bfd (mips*-*-vxworks*, mips*el-*-vxworks*): New stanzas.
* configure.in (bfd_elf32_bigmips_vxworks_vec): New stanza.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(bfd_elf32_bigmips_vec): Add elf-vxworks.lo.
(bfd_elf32_littlemips_vec): Likewise.
(bfd_elf32_nbigmips_vec): Likewise.
(bfd_elf32_nlittlemips_vec): Likewise.
(bfd_elf32_ntradbigmips_vec): Likewise.
(bfd_elf32_ntradlittlemips_vec): Likewise.
(bfd_elf32_tradbigmips_vec): Likewise.
(bfd_elf32_tradlittlemips_vec): Likewise.
(bfd_elf64_bigmips_vec): Likewise.
(bfd_elf64_littlemips_vec): Likewise.
(bfd_elf64_tradbigmips_vec): Likewise.
(bfd_elf64_tradlittlemips_vec): Likewise.
* elf32-mips.c: Include elf-vxworks.h.
(mips_info_to_howto_rel): Use elf_backend_mips_rtype_to_howto
instead of calling mips_elf32_rtype_to_howto directly.
(mips_vxworks_copy_howto_rela): New reloc howto.
(mips_vxworks_jump_slot_howto_rela): Likewise.
(mips_vxworks_bfd_reloc_type_lookup): New function.
(mips_vxworks_rtype_to_howto): Likewise.
(mips_vxworks_final_write_processing): Likewise.
(TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Override for VxWorks.
(TARGET_BIG_SYM, TARGET_BIG_NAME, elf_bed, ELF_MAXPAGESIZE): Likewise.
(elf_backend_want_got_plt): Likewise.
(elf_backend_want_plt_sym): Likewise.
(elf_backend_got_symbol_offset): Likewise.
(elf_backend_want_dynbss): Likewise.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_got_header_size: Likewise.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_finish_dynamic_symbol): Likewise.
(bfd_elf32_bfd_link_hash_table_create): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing: Likewise.
(elf_backend_additional_program_headers): Likewise.
(elf_backend_modify_segment_map): Likewise.
(elf_backend_symbol_processing): Likewise.
* elfxx-mips.c: Include elf-vxworks.h.
(mips_elf_link_hash_entry): Add is_relocation_target and
is_branch_target fields.
(mips_elf_link_hash_table): Add is_vxworks, srelbss, sdynbss, srelplt,
srelplt2, sgotplt, splt, plt_header_size and plt_entry_size fields.
(MIPS_ELF_RELA_SIZE, MIPS_ELF_REL_DYN_NAME): New macros.
(MIPS_RESERVED_GOTNO): Take a mips_elf_link_hash_table argument.
Return 3 for VxWorks.
(ELF_MIPS_GP_OFFSET): Change the argument from a bfd to a
mips_elf_link_hash_table. Return 0 for VxWorks.
(MIPS_ELF_GOT_MAX_SIZE): Change the argument from a bfd to a
mips_elf_link_hash_table. Update the call to ELF_MIPS_GP_OFFSET.
(mips_vxworks_exec_plt0_entry): New variable.
(mips_vxworks_exec_plt_entry): Likewise.
(mips_vxworks_shared_plt0_entry): Likewise.
(mips_vxworks_shared_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize the new hash_entry fields.
(mips_elf_rel_dyn_section): Change the bfd argument to a
mips_elf_link_hash_table. Use MIPS_ELF_REL_DYN_NAME to get
the name of the section.
(mips_elf_initialize_tls_slots): Update the call to
mips_elf_rel_dyn_section.
(mips_elf_gotplt_index): New function.
(mips_elf_local_got_index): Add an input_section argument.
Update the call to mips_elf_create_local_got_entry.
(mips_elf_got_page): Likewise.
(mips_elf_got16_entry): Likewise.
(mips_elf_create_local_got_entry): Add bfd_link_info and input_section
arguments. Create dynamic relocations for each entry on VxWorks.
(mips_elf_merge_gots): Update the use of MIPS_ELF_GOT_MAX_SIZE.
(mips_elf_multi_got): Update the uses of MIPS_ELF_GOT_MAX_SIZE
and MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Update the uses of
MIPS_ELF_GOT_MAX_SIZE. Create .got.plt on VxWorks.
(is_gott_symbol): New function.
(mips_elf_calculate_relocation): Use a dynobj local variable.
Update the calls to mips_elf_local_got_index, mips_elf_got16_entry and
mips_elf_got_page_entry. Set G to the .got.plt entry when calculating
VxWorks R_MIPS_CALL* relocations. Calculate and use G for all GOT
relocations on VxWorks. Add dynamic relocations for references
to the VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Don't
create dynamic relocations for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64
in VxWorks executables.
(mips_elf_allocate_dynamic_relocations): Add a bfd_link_info argument.
Use MIPS_ELF_RELA_SIZE to calculate the size of a VxWorks entry.
Don't allocate a null entry on VxWorks.
(mips_elf_create_dynamic_relocation): Update the call to
mips_elf_rel_dyn_section. Use absolute rather than relative
relocations for VxWorks, and make them RELA rather than REL.
(_bfd_mips_elf_create_dynamic_sections): Don't make .dynamic
read-only on VxWorks. Update the call to mips_elf_rel_dyn_section.
Create the .plt, .rela.plt, .dynbss and .rela.bss sections on
VxWorks. Likewise create the _PROCEDURE_LINKAGE_TABLE symbol.
Call elf_vxworks_create_dynamic_sections for VxWorks and
initialize the plt_header_size and plt_entry_size fields.
(_bfd_mips_elf_check_relocs): Don't allow GOT relocations to be
used in VxWorks executables. Don't allocate dynamic relocations
for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 in VxWorks executables.
Set is_relocation_target for each symbol referenced by a relocation.
Allocate .rela.dyn entries for relocations against the special
VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Create GOT
entries for all VxWorks R_MIPS_GOT16 relocations. Don't allocate
a global GOT entry for symbols mentioned in VxWorks R_MIPS_CALL*,
R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 relocations. Update the calls
to mips_elf_rel_dyn_section and mips_elf_allocate_dynamic_relocations.
Set is_branch_target for symbols mentioned in R_MIPS_PC16 or R_MIPS_26
relocations. Don't set no_fn_stub on VxWorks.
(_bfd_mips_elf_adjust_dynamic_symbol): Update the call to
mips_elf_allocate_dynamic_relocations.
(_bfd_mips_vxworks_adjust_dynamic_symbol): New function.
(_bfd_mips_elf_always_size_sections): Do not allocate GOT page
entries for VxWorks, and do not create multiple GOTs.
(_bfd_mips_elf_size_dynamic_sections): Use MIPS_ELF_REL_DYN_NAME.
Handle .got specially for VxWorks. Update the uses of
MIPS_RESERVED_GOTNO and mips_elf_allocate_dynamic_relocations.
Check for sgotplt and splt. Allocate the .rel(a).dyn contents last,
once its final size is known. Set DF_TEXTREL for VxWorks. Add
DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL, DT_PLTRELSZ and DT_JMPREL
tags on VxWorks. Do not add the MIPS-specific tags for VxWorks.
(_bfd_mips_vxworks_finish_dynamic_symbol): New function.
(mips_vxworks_finish_exec_plt): Likewise.
(mips_vxworks_finish_shared_plt): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Remove an unncessary call
to mips_elf_rel_dyn_section. Use a VxWorks-specific value of
DT_PLTGOT. Handle DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL,
DT_PLTRELSZ and DT_JMPREL. Update the uses of MIPS_RESERVED_GOTNO
and mips_elf_rel_dyn_section. Use a different GOT header for
VxWorks. Don't sort .rela.dyn on VxWorks. Finish the PLT on VxWorks.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): New function.
(_bfd_mips_elf_final_link): Set the GP value to _GLOBAL_OFFSET_TABLE_
on VxWorks. Update the call to ELF_MIPS_GP_OFFSET.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Declare.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_vxworks_link_hash_table_create): Likewise.
* libbfd.h: Regenerate.
* Makefile.am (elfxx-mips.lo): Depend on elf-vxworks.h.
(elf32-mips.lo): Likewise.
* Makefile.in: Regenerate.
* reloc.c (BFD_RELOC_MIPS_COPY, BFD_RELOC_MIPS_JUMP_SLOT): Declare.
* targets.c (bfd_elf32_bigmips_vxworks_vec): Declare.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(_bfd_target_vector): Add entries for them.
gas/
* config/tc-mips.c (mips_target_format): Handle vxworks targets.
(md_begin): Complain about -G being used for PIC. Don't change
the text, data and bss alignments on VxWorks.
(reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
generating VxWorks PIC.
(load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
(macro): Likewise, but do not treat la $25 specially for
VxWorks PIC, and do not handle jal.
(OPTION_MVXWORKS_PIC): New macro.
(md_longopts): Add -mvxworks-pic.
(md_parse_option): Don't complain about using PIC and -G together here.
Handle OPTION_MVXWORKS_PIC.
(md_estimate_size_before_relax): Always use the first relaxation
sequence on VxWorks.
* config/tc-mips.h (VXWORKS_PIC): New.
gas/testsuite/
* gas/mips/vxworks1.s, gas/mips/vxworks1.d,
* gas/mips/vxworks1-xgot.d: New tests.
* gas/mips/mips.exp: Run them. Do not run other tests on VxWorks.
include/elf/
* mips.h (R_MIPS_COPY, R_MIPS_JUMP_SLOT): New relocs.
ld/
* configure.tgt (mips*el-*-vxworks*, mips*-*-vxworks*): Use
separate VxWorks emulations.
* emulparams/elf32ebmipvxworks.sh: New file.
* emulparams/elf32elmipvxworks.sh: New file.
* Makefile.am (ALL_EMULATIONS): Add eelf32ebmipvxworks.o and
eelf32elmipvxworks.o.
(eelf32ebmipvxworks.c, eelf32elmipvxworks.c): New rules.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-mips/vxworks1.dd, ld-mips/vxworks1.ld, ld-mips/vxworks1-lib.dd,
* ld-mips/vxworks1-lib.nd, ld-mips/vxworks1-lib.rd,
* ld-mips/vxworks1-lib.s, ld-mips/vxworks1.rd, ld-mips/vxworks1.s,
* ld-mips/vxworks1-static.d, ld-mips/vxworks2.s, ld-mips/vxworks2.sd,
* ld-mips/vxworks2-static.sd: New tests.
* ld-mips/mips-elf.exp: Run them.
iscygwin.
(child_info::isstraced): Booleanize.
(child_info::iscygwin): Ditto.
* sigproc.cc (child_info::child_info): Minor cleanup of flag setting.
* spawn.cc (spawn_guts): Only close_all_files when we know the process has
started successfully.
* exceptions.cc (init_console_handler): Fix indentation.
* pinfo.cc (_pinfo::dup_proc_pipe): Reset wr_proc_pipe on failure. Return
previous pipe handle.
* pinfo.h (_pinfo::dup_proc_pipe): Reflect change to return value.
* spawn.cc (spawn_guts): Restore previous proc pipe on retry or if process
exits before synchronization.
(child_info::flag): Rename from 'straced'.
(child_info::isstraced): New function.
(child_info::iscygwin): Ditto.
(child_info_fork::handle_fork): Reparmize.
(child_info_fork::handle_failure): Ditto.
(child_info_spawn::handle_spawn): New function.
* dcrt0.cc (get_cygwin_startup_info): Use isstraced method.
(child_info_spawn::handle_spawn): Define new function from code previously in
dll_crt0_0.
(dll_crt0_0): Move spawn stuff into handle_spawn. Only call
init_console_handler for fork case.
* sigproc.cc (child_info::child_info): Set flag appropriately.
(child_info::proc_retry): Treat exit code as "funny" if it's a cygwin process.
* spawn.cc (spawn_guts): Remove commented out flag setting.
* sigproc.cc (child_info::sync): Return EXITCODE_OK if entering with exit_code
== 0.
(sig_send): Don't complain if sending signals while blocked if the sender isn't
in the main thread.
(child_info::retry): Move here from fork subclass.
(child_info::exit_code): New field.
(child_info::retry_count): Max retry count for process start.
(child_info::proc_retry): Declare new function.
(child_info_fork::retry): Move to parent.
(child_info_fork::fork_retry): Ditto.
* dcrt0.cc (child_info::fork_retry): Rename and move.
(child_info_fork::handle_failure): Move.
(dll_crt0_0): Initialize console handler based on whether we have a controlling
tty or not. Avoid nonsensical check for fork where it can never occur.
* environ.cc (set_proc_retry): Rename from set_fork_retry. Set retry_count in
child_info.
(parse_thing): Reflect above change.
* exceptions.cc (dummy_ctrl_c_handler): Remove unused variable name.
(ctrl_c_handler): Always return TRUE for the annoying CTRL_LOGOFF_EVENT.
* fhandler_termios.cc (fhandler_termios::tcsetpgrp): Remove call to
init_console_handler.
* fhandler_tty.cc (fhandler_tty_slave::open): Just call mange_console_count
here and let it decide what to do with initializing console control handling.
* fork.cc (fork_retry): Remove definition.
(frok::parent): Define static errbuf and use in error messages (not thread safe
yet). Close pi.hThread as soon as possible. Protect pi.hProcess as soon as
possible. Don't set retry_count. That happens automatically in the
constructor now. Accommodate name change from fork_retry to proc_retry.
* init.cc (dll_entry): Turn off ctrl-c handling early until we know how it is
supposed to be handled.
* pinfo.cc (_pinfo::dup_proc_pipe): Remember original proc pipe value for
failure error message. Tweak debug message slightly.
* sigproc.cc (child_info::retry_count): Define.
(child_info::child_info): Initialize retry count.
(child_info::sync): Set exit code if process dies before synchronization.
(child_info::proc_retry): Rename from child_info_fork::fork_retry. Use
previously derived exit code. Be more defensive about what is classified as an
error exit.
(child_info_fork::handle_failure): Move here from dcrt0.cc.
* spawn.cc (spawn_guts): Maintain error mode when starting new process to avoid
annoying pop ups. Move deimpersonate call within new loop. Move envblock
freeing to end. Loop if process dies prematurely with bad exit code.
* syscalls.cc (init_console_handler): Remove hopefully unneeded call to
init_console_handler.
on/off depending on whether we have allocated a console or not.
* dcrt0.cc (child_info_fork::fork_retry): Add more potential retry statuses.
(dll_crt0_0): Turn on/off console control depending on whether we have a
controlling tty or not.
* exceptions.cc (init_console_handler): Change BOOL to bool.
* fhandler_console.cc (fhandler_console::need_invisible): Cosmetic change.
* winsup.h (init_console_handler): Reflect argument type change.
* wincap.h (supports_setconsolectrlhandler_null): Remove duplicate capability
throughout.
* wincap.cc: Ditto.
* dcrt0.cc (child_info_fork::fork_retry): Define new function.
* fork.cc (frok::parent): Move retry decision into child_info_fork::fork_retry
and honor what it tells us to do.
* sigproc.cc (sig_send): Unhold signals on __SIGEXIT.
Jeff Johnston
Dimitri Papadopoulos
Christopher Faylor
Nathan Sidwell
Danny Smith
Chris Sutcliffe
Bernd Schmidt
Corinna Vinschen
Andreas Jaeger
Richard Sandiford
Mark Mitchell
John David Anglin