* libnosys/warning.h (link_warning) [HAVE_GNU_LD and HAVE_ELF]:
Prefix symbol in section name with __SYMBOL_PREFIX. Do not use
__make_section_unallocated. Mark magic variable as used.
* libnosys/configure.in (libc_cv_asm_previous_directive): Set
cache-id variable.
(libc_cv_asm_popsection_directive): Ditto.
(libc_cv_section_attributes): Ditto.
(libc_symbol_prefix): Rename from libc_dollar_prefix. Check for
"_" as well, and set __SYMBOL_PREFIX accordingly.
* libnosys/configure: Regenerate.
* libnosys/warning.h (__make_section_unallocated)
[HAVE_ASM_PREVIOUS_DIRECTIVE, HAVE_ASM_POPSECTION_DIRECTIVE]: Use "\n"
instead of ";" to delimit assembly lines.
* arm/configure.in: Check the value of newlib-may-supply-syscalls
enablement variable to determine if crt0 should or should not be
built.
* arm/configure: Regenerated.
* arm/Makefile.in: Changed to look at @BUILD_CRT0_TRUE@ and
@BUILD_CRT0_FALSE@ variables set in configure to determine
if crt0.o should be built and installed.
* arm/crt0.S: Copied from newlib and it now also sets up stacks for
FIQ and IRQ mode, plus calls hardware_init_hook() and
software_init_hook() if present.
* arm/libcfunc.c, arm/swi.h, arm/syscalls.c: Copied
from newlib.
* arm/Makefile.in: Build crt0.o, rdpmon-crt0.o, rdimon-crt0.o,
librdpmon.a, librdimon.a - support file for "bare" setup, as well
as "RDP" and "RDI" monitors.
* arm/coff-rdpmon.specs, arm/elf-rdpmon.specs,
arm/coff-rdimon.specs, arm/elf-rdimon.specs: gcc specs files to go
with above mentioned support libs and startfiles.
* mips/regs.S (C0_COUNT): Fix comment that kept this from being
defined.
* mips/vr4300.S: Use C0_COUNT as appropriate instead of hardcoding $9.
* mips/vr5xxx.S: Likewise.
* m68hc11/sci-inout.S: Supports -mlong-calls.
* m68hc11/sim-valid-m68hc11.ld (.tramp): New section for trampolines.
(.text): Mark the .installN and .finiN section with KEEP.
(.vectors): Likewise for .vectors.
(.gcc_except_table): New section.
* m68hc11/sim-valid-m68hc12.ld (.tramp): New section for trampolines.
(.text): Mark the .installN and .finiN section with KEEP.
(.vectors): Likewise for .vectors.
(.gcc_except_table): New section.
* frv/crt0.S (_start): Fix use of FDPIC conditionals. Move the set of
gr11 outside the FDPIC conditional. Avoid clobbering gr4 too early.
2003-11-14 Richard Sandiford <rsandifo@redhat.com>
* frv/crt0.S: Fix fdpic sp calculation.
2003-11-05 Alexandre Oliva <aoliva@redhat.com>
* frv/crt0.S: Use __stacksize, not __stack, to initialize sp on
FDPIC. Update comments on computing _GLOBAL_OFFSET_TABLE_. Don't
fixup ctors nor dtors on FDPIC.
2003-09-19 Alexandre Oliva <aoliva@redhat.com>
* frv/crt0.S (_start): Set up gr15 only for FDPIC.
* frv/crt0.S (_start): Save _GLOBAL_OFFSET_TABLE_ in gr17, and set
gr15 before function calls.
2003-09-19 DJ Delorie <dj@redhat.com>, Alexandre Oliva <aoliva@redhat.com>
* frv/crt0.S (_start): Set up gr15 with _GLOBAL_OFFSET_TABLE_'s
value.
* m68k/asm.h: Add macros for -fPIC, -msep-data and
-mid-shared-library support.
* m68k/crt0.S: Use macros for -fPIC, -msep-data and
-mid-shared-library support.
* m68k/sim-crt0.S: Likewise.
* mips/crt0_cfe.S: New file.
* mips/cfe_mem.c: New file.
* mips/cfe_prestart.S: Remove.
* mips/cfe.ld: Adjust to use crt0_cfe.o as the startup file, and
and use _start as the entry point. Align BSS to 32-byte boundary.
* mips/cfe.c: Reimplement to fit on top of a crt0_cfe.o file.
* mips/cfe_api.h (__libcfe_stack_size, __libcfe_mem_limit)
(__libcfe_meminit, __libcfe_stack_top): New prototypes.
* mips/Makefile.in (CFEOBJS): Replace cfe_prestart.o with cfe_mem.o.
(cfe.o, cfe_api.o, cfe_mem.o, crt0_cfe.o): New targets.
* mips/configure.in: Build and install crt0_cfe.o when CFE support
is built.
* mips/configure: Regenerate.
* mips/configure.in (mipsisa32el-*-*): Handle in the same way
as mipsisa32-*-*.
(mipsisa32r2-*-*, mipsisa32r2el-*-*): New, handled in the same
way as mipsisa32-*-*.
* mips/configure: Regenerate.
Catherine Moore <clm@redhat.com>
* m32r/configure.in: Do not require gcc to be able to link an
executable.
* m32r/configure: Regenerate.
* m32r/Makefile.in: Directly reference gdbstub.
* i386/cygmon.ld: Add entry for .gcc_except_table.
2000-10-25 Mark Salter <msalter@redhat.com>
* i386/cygmon-crt0.S: Use __USER_LABEL_PREFIX__ for symbols. Always
use __start for start symbol.
* i386/cygmon-salib.c: Don't build __do_global_[cd]tors for AOUT.
Disable file I/O extensions to make Plum Hall happy.
* i386/cygmon.ld: Set __start as entry point.
* i386/Makefile.in: Support IS_AOUT.
* i386/configure.in: Support IS_AOUT.
* i386/configure: Regenerated.
* i386/cygmon-salib.c:
* i386/cygmon-gmon.c (_mcount): It's _etext.
* README: Mention 68HC11/68HC12 support.
* configure.in: Recognize m6811-elf and m6812-elf.
* configure: Regenerated.
* m68hc11/Makefile.in: New file.
* m68hc11/configure.in: New file.
* m68hc11/configure: New file.
* m68hc11/crt0.S: New file.
* m68hc11/sci-inout.S: New file for 68hc11/68hc12 sio.
* m68hc11/sim-valid-m68hc11.ld: New file.
* m68hc11/sim-valid-m68hc12.ld: New file.
* m68hc11/syscalls.c: New file.
* mips/Makefile.in (GENOBJS2): New variable to name other
commonly used objects.
(DVEOBJS, JMR3904OBJS): Reference GENOBJS2.
* mips/Makefile.in: Add support for Broadcom CFE firmware.
* mips/configure.in: (mipsisa32*-*-*, *): Likewise.
* mips/configure: Regenerate.
* mips/cfe.c: New file.
* mips/cfe.ld: New file.
* mips/cfe_api.c: New file.
* mips/cfe_api.h: New file.
* mips/cfe_api_int.h: New file.
* mips/cfe_error.h: New file.
* mips/cfe_prestart.S: New file.
From Catherine Moore, Michael Meissner, Richard Sandiford:
* configure.in: Support frv*-*-*.
* frv/Makefile.in: New file.
* frv/configure: New file.
* frv/configure.in: New file.
* frv/crt0.S: New file.
* frv/fstat.c: New file.
* frv/getpid.c: New file.
* frv/isatty.c: New file.
* frv/kill.c: New file.
* frv/print.c: New file.
* frv/putnum.c: New file.
* frv/sbrk.c: New file.
* frv/sim-close.S: New file.
* frv/sim-exit.S: New file.
* frv/sim-inbyte.c: New file.
* frv/sim-lseek.S: New file.
* frv/sim-open.S: New file.
* frv/sim-read.S: New file.
* frv/sim-time.c: New file.
* frv/sim-unlink.S: New file.
* frv/sim-write.S: New file.
* frv/stat.c: New file.
* libnosys/configure.in: Check gcc's support for section attributes.
* libnosys/warning.h: Have link_warning expand to nothing if gcc
does not support section attributes.
* m68k/configure.in: Change to use LIB_AC_PROG_CC instead
of AC_PROG_CC to avoid building an executable in configuration.
* m68k/configure: Regenerated.
* scripttempl/xstormy16.sc: Don't allocate extra space for the
stack.
In libgloss/ChangeLog:
* xstormy16/Makefile.in (SIM_OBJS): Remove sbrk.o, add
sim_malloc_start.o.
* xstormy16/eva_app.ld: Add __malloc_start.
* xstormy16/sbrk.c: Remove.
* xstormy16/sim_malloc_start.s: New file.
* xstormy16/sim_high.ld: Make the stack start immediately at the
end of the program.
In newlib/ChangeLog:
* configure.host (xstormy16): Don't use the generic malloc.
* libc/machine/xstormy16/Makefile.am: Build tiny-malloc.
* libc/machine/xstormy16/Makefile.in: Regenerate.
* libc/machine/xstormy16/mallocr.c: New file.
* libc/machine/xstormy16/tiny-malloc.c: New file.
2001-12-22 Geoffrey Keating <geoffk@redhat.com>
Catherine Moore <clm@redhat.com>
Richard Henderson <rth@redhat.com>
Corinna Vinschen <vinschen@redhat.com>
* configure.host: Add support for xstormy16.
* libc/include/machine/ieeefp.h: Add support for xstormy16.
* libc/include/machine/setjmp.h: Add support for xstormy16.
* libc/include/sys/config.h: Add support for xstormy16.
* libc/machine/xstormy16/Makefile.am: New file.
* libc/machine/xstormy16/Makefile.in: New file.
* libc/machine/xstormy16/aclocal.m4: New file.
* libc/machine/xstormy16/configure: New file.
* libc/machine/xstormy16/configure.in: New file.
* libc/machine/xstormy16/setjmp.S: New file.
In libgloss/:
2001-12-22 Geoffrey Keating <geoffk@redhat.com>
Mark Salter <msalter@redhat.com>
Catherine Moore <clm@redhat.com>
Richard Henderson <rth@redhat.com>
* configure.in: Add xstormy16.
* libnosys/configure.in: Add xstormy16.
* configure: Regenerated.
* libnosys/configure: Regenerated.
* xstormy16/Makefile.in: New file.
* xstormy16/close.c: New file.
* xstormy16/configure: New file.
* xstormy16/configure.in: New file.
* xstormy16/crt0.s: New file.
* xstormy16/crt0_stub.s: New file.
* xstormy16/crti.s: New file.
* xstormy16/crtn.s: New file.
* xstormy16/eva_app.c: New file.
* xstormy16/eva_app.ld: New file.
* xstormy16/eva_stub.ld: New file.
* xstormy16/fstat.c: New file.
* xstormy16/getpid.c: New file.
* xstormy16/kill.c: New file.
* xstormy16/lseek.c: New file.
* xstormy16/open.c: New file.
* xstormy16/sbrk.c: New file.
* xstormy16/sim_high.ld: New file.
* xstormy16/stat.c: New file.
* xstormy16/syscalls.S: New file.
* xstormy16/syscalls.m4: New file.
* xstormy16/unlink.c: New file.
* xstormy16/xstormy16_stub.c: New file.
* m32r/Makefile.in: Use gdb stub set by configure.
* m32r/configure.in: Add a special macro for testing
c compiler without building executable. Add setting of
GDBSTUB.
* m32r/configure: Regenerated.
* syscall.h: Added SYS_times, SYS_gettimeofday, SYS_link values.
* mn10300/times.c: Renamed "times" to "_times" so that it can be
referenced by newlib.
* mn10300/cygmon.c: New file.
* mn10300/crt0_redboot.S: Ditto.
* mn10300/crt0_cygmon.S: Ditto.
* mn10300/Makefile.in: Added RedBoot and Cygmon support.
* mn10300/configure.in: Changed to allow for future
evaluation boards to be added.
* mn10300/configure: Regenerated.
Jeff Johnston
Nick Clifton
Richard Earnshaw
Paul Brook
Corinna Vinschen
Richard Sandiford
Eric Christopher
Alexandre Oliva
Jason Merrill
Thomas Fitzsimmons
Anthony Green
Dave Brolley
Jonathan Larmour
Joel Sherrill
Mark Salter
Geoffrey Keating
Michael Meissner