* libc/include/machine/_types.h: New file.
* libc/include/sys/types.h: Do not check for __rtems__
when including <machine/_types.h>. Remove some redundant
declarations now that <machine/_types.h> is included.
* libc/sys/rtems/machine/_types.h: Removed. Replaced with
shared header file.
* libc/include/sys/types.h [__rtems__]: Include new
header file machine/_types.h.
* libc/include/machine/types.h: Ditto.
* libc/sys/rtems/machine/_types.h: New file.
* libc/include/machine/setjmp.h (_JBLEN, AM33/2.0): Set to 26.
* libc/machine/mn10300/setjmp.S (setjmp, longjmp): Save and
restore callee-saved FP registers.
* libc/sys/rtems/include/limits.h, libc/sys/rtems/sys/param.h,
libc/sys/rtems/sys/syslimits.h: Update to be in sync with what
constants are defined in each file in the shared versions in
libc/include.
* libc/sys/rtems/crt0.c: Define extra symbols on SH and HP-PA to
autoconf can link programs.
* libc/include/machine/types.h: Explicitly specify signed on
intXX_t types to ensure they are signed.
* libc/sys/rtems/machine: New directory.
* libc/sys/rtems/machine/limits.h, libc/sys/rtems/machine/param.h,
libc/sys/rtems/sys/param.h, libc/sys/rtems/sys/syslimits.h,
libc/sys/rtems/sys/utime.h: New files added to make *-rtems newlib
targets more BSD like when installed without requiring files to
be overwritten at install point when RTEMS itself is installed.
* Makefile.am: Pick up system dependent machine .h files such as
might be found on a BSD-ish system.
* Makefile.in: Regenerate.
* libc/include/machine/types.h: When on an RTEMS target, define a
few BSD flavor types.
* configure.host: Recognize m6811-elf and m6812-elf targets.
* libc/include/machine/setjmp.h (_JBLEN): Define for 68hc11/68hc12.
* libc/include/machine/ieeefp.h (__IEEE_BIG_ENDIAN): Define for 68HC11.
(_DOUBLE_IS_32BITS): Define when compiling with -fshort-double.
* libc/include/sys/config.h (INT_MAX, UINT_MAX): Define
according to __INT_MAX__.
(_POINTER_INT): Define to short.
* libc/machine/m68hc11/Makefile.am: New file.
* libc/machine/m68hc11/Makefile.in: New file.
* libc/machine/m68hc11/configure.in: New file.
* libc/machine/m68hc11/configure: New file.
* libc/machine/m68hc11/aclocal.m4: New file.
* libc/machine/m68hc11/setjmp.S: New file.
* libc/include/machine/ieeefp.h: Change to only define
floating point defines (e.g one of __IEEE_BIG_ENDIAN or
__IEEE_LITTLE_ENDIAN must be defined for each platform).
* libc/include/sys/config.h: Include <machine/ieeefp.h> and
remove redundant floating point definitions.
* libc/include/math.h: Add <sys/types.h> to get _uint32_t definition.
* libc/include/machine/types.h: Skip __off_t, __pid_t, and
__loff_t definitions if special _HAVE_SYSTYPES macro defined.
* libc/include/sys/config.h: Removed _uint*, _int* definitions.
* libc/include/sys/param.h: Remove i386 case which is handled
by default case.
(BIG_ENDIAN, LITTLE_ENDIAN): Protect
definitions in case they are already defined.
(BYTE_ORDER): Add default case using _IEEE_BIG_ENDIAN and
_IEEE_LITTLE_ENDIAN flags.
* libc/include/sys/reent.h: Change __uint32_t references to
use _ULong instead.
(_REENT_GETDATE_REENT_P): New macro.
* libc/include/sys/types.h (__int16_t, __uint16_t): Added.
(__int32_t, __uint32_t, __int64_t, __uint64_t): Ditto.
* libc/search/hash.h: Add default setting of BYTE_ORDER,
LITTLE_ENDIAN, and BIG_ENDIAN, if not already defined.
* libc/sys/linux/sys/types.h: Include <sys/_types.h>. Define
ssize_t based on _ssize_t. Remove __socklen_t, __uintptr_t,
pid_t, off_t, loff_t, caddr_t, and daddr_t type
definitions which are done by subsequent glibc headers.
Add macro definitions to prevent subsequent header files from
defining pid_t, off_t, ssize_t, and key_t. Move uintptr_t and
intptr_t to after glibc definitions of types they are based on.
* libc/sys/linux/Makefile.am: Add support for cfspeed.c and
tcsendbrk.c.
* libc/sys/linux/Makefile.in: Regenerated.
* libc/sys/linux/termios.c: Add tcflow(), tcflush(),
tcgetpgrp(), and tcsetpgrp() functions.
* libc/sys/linux/sys/termios.h: Add include of machine/termios.h
to get __MAX_BAUD rate.
* libc/sys/linux/machine/i386/include/termios.h: New file.
* libc/include/machine/termios.h: Ditto.
* libc/sys/linux/cfspeed.c: Ditto.
* libc/sys/linux/tcsendbrk.c: Ditto.
* configure.host: Add support for powerpc-eabialtivec*.
* libc/include/malloc.h: Add include of <machine/malloc.h>.
* libc/include/stdlib.h: Add include of <machine/stdlib.h>.
* libc/include/machine/malloc.h: New file.
* libc/include/machine/stdlib.h: Ditto.
* libc/include/machine/setjmp.h: Add support for powerpc altivec.
* libc/machine/powerpc/Makefile.am: Add conditional objects and
sources based on configuration.
* libc/machine/powerpc/Makefile.in: Regenerated.
* libc/machine/powerpc/configure: Ditto.
* libc/machine/powerpc/configure.in: Add check for
powerpc-eabialtivec* in which case add in additional source files.
* libc/machine/powerpc/setjmp.S: Add altivec support.
* libc/machine/powerpc/vec_calloc.c: New file.
* libc/machine/powerpc/vec_free.c: Ditto.
* libc/machine/powerpc/vec_malloc.c: Ditto.
* libc/machine/powerpc/vec_mallocr.c: Ditto.
* libc/machine/powerpc/vec_realloc.c: Ditto.
* libc/machine/powerpc/machine/malloc.h: Ditto.
* libc/machine/powerpc/machine/stdlib.h: Ditto.
* libc/machine/powerpc/vfprintf.c: New file that is vfprintf.c
with added altivec format specifiers.
* libc/machine/powerpc/vfscanf.c: New file that is vfscanf.c with
added altivec format specifiers.
* libc/include/machine/ieeefp.h: Configure d10v doubles to
be 32 bits if __DOUBLE__ == 32 otherwise doubles are 64 bits.
libc/include/sys/config.h: Ditto.
2001-12-22 Geoffrey Keating <geoffk@redhat.com>
Catherine Moore <clm@redhat.com>
Richard Henderson <rth@redhat.com>
Corinna Vinschen <vinschen@redhat.com>
* configure.host: Add support for xstormy16.
* libc/include/machine/ieeefp.h: Add support for xstormy16.
* libc/include/machine/setjmp.h: Add support for xstormy16.
* libc/include/sys/config.h: Add support for xstormy16.
* libc/machine/xstormy16/Makefile.am: New file.
* libc/machine/xstormy16/Makefile.in: New file.
* libc/machine/xstormy16/aclocal.m4: New file.
* libc/machine/xstormy16/configure: New file.
* libc/machine/xstormy16/configure.in: New file.
* libc/machine/xstormy16/setjmp.S: New file.
In libgloss/:
2001-12-22 Geoffrey Keating <geoffk@redhat.com>
Mark Salter <msalter@redhat.com>
Catherine Moore <clm@redhat.com>
Richard Henderson <rth@redhat.com>
* configure.in: Add xstormy16.
* libnosys/configure.in: Add xstormy16.
* configure: Regenerated.
* libnosys/configure: Regenerated.
* xstormy16/Makefile.in: New file.
* xstormy16/close.c: New file.
* xstormy16/configure: New file.
* xstormy16/configure.in: New file.
* xstormy16/crt0.s: New file.
* xstormy16/crt0_stub.s: New file.
* xstormy16/crti.s: New file.
* xstormy16/crtn.s: New file.
* xstormy16/eva_app.c: New file.
* xstormy16/eva_app.ld: New file.
* xstormy16/eva_stub.ld: New file.
* xstormy16/fstat.c: New file.
* xstormy16/getpid.c: New file.
* xstormy16/kill.c: New file.
* xstormy16/lseek.c: New file.
* xstormy16/open.c: New file.
* xstormy16/sbrk.c: New file.
* xstormy16/sim_high.ld: New file.
* xstormy16/stat.c: New file.
* xstormy16/syscalls.S: New file.
* xstormy16/syscalls.m4: New file.
* xstormy16/unlink.c: New file.
* xstormy16/xstormy16_stub.c: New file.
* libc/include/machine/setjmp-dj.h: With DJ Delorie's permission,
changed the copyright information to allow free modification of the
file with no reference to "copying.dj".
* libc/include/sys/stat-dj.h: Ditto.
* libc/machine/i386/setjmp.S: Ditto.
* libc/sys/h8300hms/sys/file.h: Ditto.
* libc/sys/sysmec/access.c: Ditto.
* libc/sys/sysnecv850/access.c: Ditto.
* libc/stdio/mktemp.c: Fixed typo for the word copyright.
* libc/stdlib/getenv_r.c: Ditto.
* libc/stdlib/putenv_r.c: Ditto.
* libc/stdlib/setenv_r.c: Ditto.
* libc/stdlib/getenv.c: Removed DJ reference since any possible
modifications will now be in the _r version of this file.
* libc/stdlib/putenv.c: Ditto.
* libc/stdlib/setenv.c: Ditto.
* libc/sys/go32/copying.dj: Removed DJ's address which is no longer
valid. Added a reference to DJ's web page that contains his address.
* libc/sys/go32/*.s: Removed references to DJ's old address.
* libc/sys/go32/*.c: Ditto.
* libc/sys/go32/*.h: Ditto.
* libc/sys/go32/*.S: Ditto.
* libc/sys/go32/sys/*.h: Ditto.
* Merge RTEMS specific .h files into main libc/include.
* libc/sys/rtems/include/signal.h: Removed.
* libc/sys/rtems/include/time.h: Removed.
* libc/sys/rtems/sys/features.h: Removed.
* libc/sys/rtems/sys/sched.h: Removed.
* libc/sys/rtems/sys/siginfo.h: Removed.
* libc/sys/rtems/sys/signal.h: Removed.
* libc/sys/rtems/sys/time.h: Removed.
* libc/sys/rtems/sys/times.h: Removed.
definitions for time_t and clock_t since these are
no longer in time.h.
* libc/include/pthread.h: New file.
* libc/include/sys/sched.h: New file.
* libc/include/sys/features.h: New file.
* libc/include/time.h: Removed duplicate definition of clock_t
and time_t, get them from <sys/types.h> instead. Add prototypes for POSIX clock and timer functionality.
* libc/sys/linux/sys/types.h: Changed to include
* libc/include/machine/types.h: Add _CLOCKID_T_ and _TIMER_T_.
* libc/include/sys/signal.h: Add more complete set of POSIX
signal functionality including real-time and threaded signals.
* libc/include/sys/types.h: Add clock_t, time_t, struct
timespec, and struct itimerspec. Centralizing these makes
things cleaner. RTEMS uses 64-bit dev_t.
Added numerous primitive definitions
for pthreads including macros, pthread_attr_t,
pthread_mutexattr_t, pthread_condattr_t, pthread_key_t,
pthread_once_t, and pthread_t.
* libc/include/sys/unistd.h: Added getlogin_r() prototype.
If RTEMS follow POSIX on read(), write() and sbrk() prototype.
Feature flags removed and moved to new file <sys/features.h>.
Full set of POSIX sysconf() constants
Jeff Johnston
Aldy Hernandez
Christopher Faylor
Corinna Vinschen
Alexandre Oliva
Anthony Green
Nick Clifton
Richard Sandiford
Thomas Fitzsimmons
Dave Brolley
Geoffrey Keating