It seems there is a swapped logic in one of the subcases of
setjmp.S for MIPS: when the FPU registers are 64-bit within
a 32-bit aligned jmp_buf, the code realigns the pointers
before doing 64-bit writes, but the branch logic is swapped:
we must avoid the address adjustement when bit 2 is zero
(that is, the address is already 8-byte aligned).
This always triggers an address error when run, as tested
on a MIPS VR4300 with O64 ABI.
Convert all the libc/ subdir makes into the top-level Makefile. This
allows us to build all of libc from the top Makefile without using any
recursive make calls. This is faster and avoids the funky lib.a logic
where we unpack subdir archives to repack into a single libc.a. The
machine override logic is maintained though by way of Makefile include
ordering, and source file accumulation in libc_a_SOURCES.
There's a few dummy.c files that are no longer necessary since we aren't
doing the lib.a accumulating, so punt them.
The winsup code has been pulling the internal newlib ssp library out,
but that doesn't exist anymore, so change that to pull the objects.
This kills off the last configure script under libc/ and folds it
into the top newlib configure script. The a lot of the logic was
already in the top configure script, so move what's left into a
libc/acinclude.m4 file.
The crt0.o was handled in a subdir-by-subdir basis: it would be compiled
in one (e.g. libc/sys/$arch/), then copied up one level (libc/sys/), then
copied up another (libc/) before finally being copied & installed in the
top newlib dir. The libc/sys/ copy was cleaned up, and then the top dir
was changed to copy it directly out of the libc/sys/$arch/ dir. But the
libc/sys/ copy to libc/ was left behind. Clean that up now too.
This is used in a bunch of places, but nowhere is it ever set, and
nowhere can I find any documentation, nor can I find any other project
using it. So delete the flags to simplify.
This was only ever used for i?86-pc-linux-gnu targets, but that's been
broken for years, and has since been dropped. So clean this up too.
This also deletes the funky objectlist logic since it only existed for
the libtool libraries. Since it was the only thing left in the small
Makefile.shared file, we can punt that too.
Now that we use AC_NO_EXECUTABLES, and we require a recent version of
autoconf, we don't need to define our own copies of these macros. So
switch to the standard AC_PROG_CC.
THe stdio subdir is actually required by the documentation. The
stdio/def is handled dynamically, but libc.texi always expects it
to be included, and fails if it isn't. So making it required when
building docs is safe.
The xdr subdir is handled dynamically, but it doesn't include any
docs, so the dynamic logic isn't (currently) adding any value. So
making it required when building docs is safe.
That leaves: iconv, stdio64, posix, and signal subdirs. The chapters
have a little disclaimer saying they are system-dependent, but even
then, imo having stable manuals regardless of the target is preferable,
and we can add more disclaimer language to these chapters if we want.
This doesn't touch the man page codepaths, just the info/pdf.
When using the top-level configure script but subdir Makefiles, the
newlib_basedir value gets a bit out of sync: it's relative to where
configure lives, not where the Makefile lives. Move the abs setting
from the top-level configure script into acinclude.m4 so we can rely
on it being available everywhere. Although this commit doesn't use
it anywhere, just lays the groundwork.
The machine configure scripts are all effectively stub scripts that
pass the higher level options to its own makefile. There were only
three doing custom tests. The rest were all effectively the same as
the libc/ configure script.
So instead of recursively running configure in all of these subdirs,
generate their makefiles from the top-level configure. For the few
unique ones, deploy a pattern of including subdir logic via m4:
m4_include([machine/nds32/acinclude.m4])
Some of the generated machine makefiles have a bunch of extra stuff
added to them, but that's because they were inconsistent in their
configure libtool calls. The top-level has it, so it exports some
new vars to the ones that weren't already.
It's unclear why this was added originally, but assuming it was needed
20 years ago, it shouldn't be explicitly required nowadays. Current
versions of autotools already take care of exporting LDFLAGS to the
Makefile as needed (things are actually getting linked). That's why
the configure diffs show LDFLAGS still here, but shifted to a diff
place in the output list. A few dirs stop exporting LDFLAGS, but
that's because they don't do any linking, only compiling, so it's
correct.
As for the use of $ldflags instead of the standard $LDFLAGS, I can't
really explain that at all. Just use the right name so users don't
have to dig into why their setting isn't respected, and then use a
non-standard name instead. Adjust the testsuite to match.
Since AM_INIT_AUTOMAKE calls AC_PROG_AWK, and some configure.ac
scripts call it too, we end up testing for awk multiple times. If
we change NEWLIB_CONFIGURE to require the macro instead, then it
makes sure it's always expanded, but only once.
While we're here, do the same thing with AC_PROG_INSTALL since it
is also called by AM_INIT_AUTOMAKE, although it doesn't currently
result in duplicate configure checks.
This matches what the other GNU toolchain projects have done already.
The generated diff in practice isn't terribly large. This will allow
more use of subdir local.mk includes due to fixes & improvements that
came after the 1.11 release series.
The newlib & libgloss dirs are already generated using autoconf-2.69.
To avoid merging new code and/or accidental regeneration using diff
versions, leverage config/override.m4 to pin to 2.69 exactly. This
matches what gcc/binutils/gdb are already doing.
The README file already says to use autoconf-2.69.
To accomplish this, it's just as simple as adding -I flags to the
top-level config/ dir when running aclocal. This is because the
override.m4 file overrides AC_INIT to first require the specific
autoconf version before calling the real AC_INIT.
The configure scripts were regenerated with 2.69 for the newlib-4.2.0
release in 484d2ebf8d, but the aclocal
files were not. Do that now to avoid confusion between the two as to
which version of autoconf was used.
Since automake deprecated the INCLUDES name in favor of AM_CPPFLAGS,
change all existing users over. The generated code is the same since
the two variables have been used in the same exact places by design.
There are other cleanups to be done, but lets focus on just renaming
here so we can upgrade to a newer automake version w/out triggering
new warnings.
The 'cygnus' option was removed from automake 1.13 in 2012, so the
presence of this option prevents that or a later version of automake
being used.
A check-list of the effects of '--cygnus' from the automake 1.12
documentation, and steps taken (where possible) to preserve those
effects (See also this thread [1] for discussion on that):
[1] https://lists.gnu.org/archive/html/bug-automake/2012-03/msg00048.html
1. The foreign strictness is implied.
Already present in AM_INIT_AUTOMAKE in newlib/acinclude.m4
2. The options no-installinfo, no-dependencies and no-dist are implied.
Already present in AM_INIT_AUTOMAKE in newlib/acinclude.m4
Future work: Remove no-dependencies and any explicit header dependencies,
and use automatic dependency tracking instead. Are there explicit rules
which are now redundant to removing no-installinfo and no-dist?
3. The macro AM_MAINTAINER_MODE is required.
Already present in newlib/acinclude.m4
Note that maintainer-mode is still disabled by default.
4. Info files are always created in the build directory, and not in the
source directory.
This appears to be an error in the automake documentation describing
'--cygnus' [2]. newlib's info files are generated in the source
directory, and no special steps are needed to keep doing that.
[2] https://lists.gnu.org/archive/html/bug-automake/2012-04/msg00028.html
5. texinfo.tex is not required if a Texinfo source file is specified.
(The assumption is that the file will be supplied, but in a place that
automake cannot find.)
This effect is overriden by an explicit setting of the TEXINFO_TEX
variable (the directory part of which is fed into texi2X via the
TEXINPUTS environment variable).
6. Certain tools will be searched for in the build tree as well as in the
user's PATH. These tools are runtest, expect, makeinfo and texi2dvi.
For obscure automake reasons, this effect of '--cygnus' is not active
for makeinfo in newlib's configury.
However, there appears to be top-level configury which selects in-tree
runtest, expect and makeinfo, if present. So, if that works as it
appears, this effect is preserved. If not, this may cause problem if
anyone is building those tools in-tree.
This effect is not preserved for texi2dvi. This may cause problems if
anyone is building texinfo in-tree.
If needed, explicit checks for those tools looking in places relative to
$(top_srcdir)/../ as well as in PATH could be added.
7. The check target doesn't depend on all.
This effect is not preseved. The check target now depends on the all
target.
This concern seems somewhat academic given the current state of the
testsuite.
Also note that this doesn't touch libgloss.
Use the same name as glibc & gnulib to indicate "newlib itself is
being compiled". This also harmonizes the codebase a bit in that
_LIBC was already used in places instead of _COMPILING_NEWLIB.
Building for bfin-elf, mips-elf, and x86_64-pc-cygwin produces
the same object code.
The _COMPILING_NEWLIB symbol is for declaring "the code is being
compiled for newlib itself" so headers can change behavior vs the
header being used by users (who should get the normal clean API).
Unfortunately, this symbol is defined inconsistently leading to it
only being useful for a few subsections of the tree.
Pull it out so that it's defined all the time for all targets.
This code looks like it's written to be copied & pasted between diff
C libraries and relies on _LIBC only being used with glibc. This will
break when newlib changes from _COMPILING_NEWLIB to _LIBC, so delete
the glibc-specific logic ahead of time.
This Patch removes Soft Float code from MIPS.
Instead It adds the soft float code from RISCV
The code came from FreeBSD and assumes the FreeBSD softfp
implementation not the one with GCC. That was an overlooked and
fixed in the other fenv code already.
Signed-off-by: Eshan Dhawan <eshandhawan51@gmail.com>
- From: Cesar Philippidis <cesar@codesourcery.com>
Date: Tue, 10 Apr 2018 14:43:42 -0700
Subject: [PATCH] nvptx port
This port adds support for Nvidia GPU's, which are primarily used as
offload accelerators in OpenACC and OpenMP.
Giovanni Bajo
Mike Frysinger
Jeff Johnston
Jon Turney
Eshan dhawan
Eshan dhawan via Newlib
Jon Beniston
Steve Ellcey
Steve Ellcey
Steve Ellcey