bigwavebuffer_ so that it is always cleaned, also in child processes.
(fhandler_dev_dsp::Audio_in::stop): Ditto.
(fhandler_dev_dsp::close): Stop audio play immediately in case of
abnormal exit.
* path.cc (path_conv::check): Strip trailing dots and spaces and
return error if the final component had only dots and spaces.
(normalize_posix_path): Revert 2004-04-30.
(chdir): Do not check for trailing spaces. Do not set native_dir
to c:\ for virtual devices. Pass only native_dir to cwd.set.
(cwdstuff::set): Assume posix_cwd is already normalized.
final . if it follows '\\'.
(mount_info::conv_to_win32_path): Only backslashify the path when no mount is
found.
(chdir): Do not look for components with only dots.
* path.cc (normalize_posix_path): Process all Posix paths and map three or more
initial slashes to a single one. Simplify processing following two initial
slashes.
(normalize_win32_path): Make last argument non-optional and do not check for
NULL value.
set_file_attribute call to indicate that NT security isn't used.
(fhandler_disk_file::fchmod): Rearrange to isolate 9x related
statements.
Do not set FILE_ATTRIBUTE_SYSTEM.
(fhandler_disk_file::fchown): Check noop case first.
* fhandler.cc (fhandler_base::open9x): Remove ntsec related statements.
(fhandler_base::set_name): Do not set namehash.
* fhandler.h (fhandler_base::get_namehash): Compute and set namehash if
needed.
* syscalls.cc (access): Verify that fh is not NULL. Do not set PC_FULL.
(chmod): Ditto.
(chown_worker): Ditto.
(stat_worker): Ditto. Verify if the path exists.
* dir.cc (mkdir): Change set_file_attribute call to indicate that
NT security isn't used.
* fhandler.cc (fhandler_base::open_9x): New method, created from
fhandler_base::open.
(fhandler_base::open): Rearrange to use NtCreateFile instead of
CreateFile.
* fhandler.h (enum query_state): Redefine query_null_access to
query_stat_control. query_null_access isn't allowed in NtCreateFile.
(fhandler_base::open_9x): Declare.
* fhandler_disk_file.cc (fhandler_base::fstat_fs): Use
query_stat_control first, query_read_control if that fails.
(fhandler_disk_file::fchmod): Call enable_restore_privilege before
trying to open for query_write_control. Don't fall back to
opening for query_read_control.
(fhandler_disk_file::fchown): Ditto.
(fhandler_disk_file::facl): Only request restore privilege and query
access necessary for given cmd.
* fhandler_raw.cc (fhandler_dev_raw::open): Call fhandler_base::open
instead of opening device here.
* ntdll.h (NtCreateFile): Declare.
* path.cc (symlink_worker): Change set_file_attribute call to indicate
that NT security isn't used.
* sec_acl.cc (getacl): Fix bracketing.
* sec_helper.cc (enable_restore_privilege): New function.
* security.cc (str2buf2uni_cat): New function.
(write_sd): Don't request restore permission here.
* security.h (set_process_privileges): Drop stale declaration.
(str2buf2uni): Declare.
(str2buf2uni_cat): Declare.
(enable_restore_privilege): Declare.
* syscalls.cc (fchown32): Return immediate success on 9x.
query_state.
(fhandler_base::fchown): New method.
* fhandler.h: Declare fchown method in fhandler_base,
fhandler_disk_file and fhandler_virtual.
(enum query_state): Add query_write_control.
* fhandler_disk_file.cc (fhandler_disk_file::fchmod): Set query_state
to query_write_control. Only remove FILE_ATTRIBUTE_READONLY if not
setting security descriptor.
(fhandler_disk_file::fchown): New method.
* fhandler_virtual.cc (fhandler_virtual::fchown): New method.
* sec_acl.cc (setacl): Call write_sd with additional handle attribute.
* security.cc (write_sd): Take handle argument. Only request owner
if getting SE_RESTORE_NAME privilege failed. Only open file if
NtSetSecurityObject failed or handle is NULL.
(set_nt_attribute): Call write_sd with additional handle attribute.
* security.h (write_sd): Declare with additional handle argument.
* syscalls.cc (ttyname_r): New function.
(ttyname): Move functionality to ttyname_r. Call it from here.
* include/cygwin/version.h: Bump API minor number.
* path.h (path_conv::set_symlink): Add argument.
(path_conv::get_symlink_length): New method.
(path_conv::symlink_length): New member.
* path.cc (path_conv::check): Pass symlen to set_symlink.
* fhandler_disk_file.cc (fhandler_base::fstat_helper): For symlinks
set st_size from get_symlink_length.
boolean argument so that playing can be stopped without playing
pending buffers.
(fhandler_dev_dsp::ioctl): Stop playback immediately for
SNDCTL_DSP_RESET. Do not reset audio parameters in this case.
Add support for ioctl SNDCTL_DSP_GETISPACE.
(fhandler_dev_dsp::Audio_out::emptyblocks): Now returns the number of
completely empty blocks.
(fhandler_dev_dsp::Audio_out::buf_info): p->fragments is now the number
of completely empty blocks. This conforms with the OSS specification.
(fhandler_dev_dsp::Audio_out::parsewav): Ignore wave headers that are
not aligned on four byte boundary.
(fhandler_dev_dsp::Audio_in::buf_info): New, needed for
SNDCTL_DSP_GETISPACE.
rather than creating a suspended thread. Wait for "cancellation event" to
indicate that started thread has been properly initialized.
(pthread::thread_init_wrapper): Use set_tls_self_pointer() to set tid and
cygtls. Signal with cancel_event when done.
tty_min, mtinfo and fs_info thoroughout.
* fhandler.h: Redefine all set_close_on_exec methods to take a bool
argument.
(enum conn_state): Rename from connect_state.
(class fhandler_base): Rename some status flags to align with
accessor method names. Drop encoded flag entirely. Unify status
accessor methods. Const'ify all read accessor methods.
(class fhandler_socket): Ditto.
(class fhandler_dev_raw): Ditto.
* fhandler_disk_file.cc (fhandler_base::fstat_fs): Use fs.fs_is_fat()
instead of evaluating FATness of file system here.
(fhandler_disk_file::opendir): Drop call to set_encoded().
(fhandler_disk_file::readdir): Use pc.isencoded() directly.
* mtinfo.h (class mtinfo_drive): Const'ify all read accessor methods.
* path.cc (fsinfo_cnt): Add.
(fs_info::update): Accomodate class changes. Evaluate file system
name specific flags right here. Add thread safety for reading and
writing global fsinfo array.
* path.h (enum path_types): Drop values for flags kept in fs already.
(struct fs_info): Move status informatin into private struct type
status_flags. Add accessor methods. Remove path and file system
name string arrays in favor of status bits.
(class path_conv): Use new fs_info status information where
appropriate.
(path_conf::fs_has_ea): Rename from fs_fast_ea.
(path_conf::fs_has_acls): New method.
(path_conf::root_dir): Remove.
(path_conf::volname): Remove.
* syscalls (statfs): Evaluate root dir locally.
* tty.h (class tty_min): Unify status accessor methods. Const'ify
all read accessor methods.
(pthread::set_tls_self_pointer): New static function.
* thread.cc (MTinterface::fixup_after_fork): Change call to
pthread::init_mainthread.
(pthread::init_mainthread): Remove parameter forked. Simplify thread self
pointer handling.
(pthread::self): Set thread self pointer to null_pthread if thread has not been
initialized.
(pthread::set_tls_self_pointer): New static function.
* path.cc (normalize_posix_path): Add "tail" argument and set it. Always have
a final slash for directories. Pass 3rd argument to normalize_win32_path.
(path_conv::check): Pass tail to normalize_posix_path. Set need_directory and
remove final slash after that call. Remove last argument to
mount_table->conv_to_win32_path(). Remove noop dostail check. Remove
fs.update() from inner loop. Improve tail finding search.
(normalize_win32_path): Add and set tail argument.
(mount_item::build_win32): Avoid calling strcpy.
(mount_info::conv_to_win32_path): Remove third argument and simplify because
the source is normalized. Keep /proc path in Posix form. Call
win32_device_name() only once.
(mount_info::conv_to_posix_path): Add and use 3rd argument to
normalize_win32_path to avoid calling strlen.
(cwdstuff::set): Add 3rd argument to normalize_posix_path and remove final
slash if any.
* shared_info.h (mount_info::conv_to_win32_path): Remove last argument in
declaration.
set_did_lseek.
(fhandler_base::fhandler_base): Accomodate new status and open_status
constructor.
* fhandler.h: Remove status bit enumerator.
(FHDEVN): Remove.
(FHISSETF): Remove.
(FHSETF): Remove.
(FHCLEARF): Remove.
(FHCONDSETF): Remove.
(FHSTATOFF): Remove.
(UNCONNECTED, CONNECT_PENDING, CONNECTED): Substitute by enum
connect_state.
(fhandler_base::status): Define as bitfield struct type status_flags.
Remove unused flags entirely. Accomodate all status access methods.
(open_status): Define as bitfield struct type status_flags.
(fhandler_socket): Move socket related status bits to here. Redefine
had_connect_or_listen to be part of these status bits. Accomodate
related access methods.
* fhandler_disk_file.cc (fhandler_base::fstat_helper): Use pc.issymlink
instead of dropped method get_symlink_p.
(fhandler_base::open_fs): Remove setting dropped status flags.
* fhandler_socket.cc: Use values from enum connect_state throughout.
(fhandler_socket::fhandler_socket): Initialize status bits.
* fhandler_virtual.cc (fhandler_virtual::open): Remove setting dropped
status flags.
* net.cc: Use values from enum connect_state throughout.
* select.cc: Ditto.
* shared_info.h: Protect struct console_state using _FHANDLER_H_
instead of FHDEVN.
to query_open setting.
(fhandler_base::fhandler_base): Initialize query_open.
* fhandler.h (FH_QUERYOPEN): Drop.
(enum query_state): Add.
(class fhandler_base): Add query_open member.
(fhandler_base::get_query_open): Redefine to use query_open.
(fhandler_base::set_query_open): Ditto.
* fhandler_disk_file.cc (fhandler_base::fstat_fs): Remove O_DIROPEN
from open_flags since it's added in open_fs anyway. Remove
query_open_already. Use new query_open settings. Rearrange slightly.
(fhandler_base::fstat_helper): Add get_io_handle as parameter to
get_file_attribute.
* security.cc (get_nt_object_attribute): Make returning an int.
Return -1 on error, 0 otherwise.
(get_file_attribute): Take an object handle as argument. Move down
to allow calling get_nt_object_attribute in case a non-NULL handle
is given.
* security.h (get_file_attribute): Add handle to argument list.
* syscalls.cc (chown_worker): Accomodate new definition of
get_file_attribute.
compressed size only if the matching attributes are set. Use
NtQueryInformationFile instead of GetCompressedFileSize.
(fhandler_base::fstat_by_handle): Remove NT 3.5 cruft since
local.dwVolumeSerialNumber isn't used subsequently.
* ntdll.h: Add typedefs for FILE_COMPRESSION_INFORMATION and
FILE_INFORMATION_CLASS.
has_been_closed gets set.
(fhandler_socket::sendmsg): Ditto.
* net.cc (wsock_event::wait): Don't initialize evts. Don't try to
evaluate network events if WSAEnumNetworkEvents fails.
(wsock_event::release): Save last WSA error and set it again unless
resetting to blocking socket fails.
* wsock_event.h (class wsock_event): Remove destructor.
GetTapePosition returned a non-zero partition number.
(mtinfo_drive::create_partitions): Reinitialize to partition 0.
Support TAPE_DRIVE_INITIATOR and TAPE_DRIVE_FIXED partitioning.
(mtinfo_drive::set_partition): Initialize new partition.
(mtinfo_drive::status): Readd accidentally dropped setting of mt_resid.
* net.cc (wsock_event::prepare): Always print debug output in case
of error.
default to false..
* thread.cc (MTinterface::fixup_after_fork): Call pthread::init_mainthread with
forked = true.
(pthread::init_mainthread): Add parameter forked. Do not change thread self
pointer when forked.
of shmget to retrieve the shared memory segment from Cygserver
instead of failing immediately.
* include/cygwin/ipc.h (IPC_KEY_IS_SHMID): New internal flag for
shmget when called from shmat.
ERROR_EOM_OVERFLOW and ERROR_NO_DATA_DETECTED to EIO. Add mappings
for ERROR_NO_MEDIA_IN_DRIVE, ERROR_DEVICE_REQUIRES_CLEANING and
ERROR_DEVICE_DOOR_OPEN.
* fhandler.h (class fhandler_dev_raw): Drop varblkop member.
(fhandler_dev_raw::is_eom): De-virtualize.
(fhandler_dev_raw::is_eof): Ditto.
(class fhandler_dev_tape): Drop lasterr and dp member. Add mt_mtx
member. Drop all private methods formerly used by ioctl.
(fhandler_dev_tape::is_rewind_device): Use get_minor for clarity.
(fhandler_dev_tape::driveno): New method.
(fhandler_dev_tape::drive_init): New method.
(fhandler_dev_tape::clear): Remove method.
(fhandler_dev_tape::is_eom): Ditto.
(fhandler_dev_tape::is_eof): Ditto.
(fhandler_dev_tape::write_file): Ditto.
(fhandler_dev_tape::read_file): Ditto.
(fhandler_dev_tape::_lock): New method.
(fhandler_dev_tape::unlock): New method.
(fhandler_dev_tape::raw_read): New method.
(fhandler_dev_tape::raw_write): New method.
* fhandler_raw.cc (fhandler_dev_raw::is_eom): New method.
(fhandler_dev_raw::is_eof): New method.
(fhandler_dev_raw::open): Allow setting write through option by
using the O_TEXT flag as ... flag.
(fhandler_dev_raw::writebuf): Remove usage of varblkop and other
tape specific code.
(fhandler_dev_raw::raw_read): Ditto.
(fhandler_dev_raw::dup): Ditto.
* fhandler_tape.cc: Rewrite tape operations entirely. Implement
new tape driver classes mtinfo, mtinfo_drive and mtinfo_part.
Reduce fhandler_dev_tape methods to mostly just calling appropriate
mtinfo_drive methods.
(mtinfo_init): New function adding the mtinfo shared memory area.
* mtinfo.h: New file, containing the definition of the new tape
driver classes.
* shared.cc: Include mtinfo.h.
(offsets): Add entry for mtinfo shared memory area.
(memory_init): Call mtinfo_init.
* shared_info.h (shared_locations): Add SH_MTINFO shared location.
* include/cygwin/mtio.h: Change and add various comments. Add GMT_xxx
macros for new generic flags. Add MT_ST_xxx bitfield definitions
for MTSETDRVBUFFER ioctl.
* include/cygwin/version.h: Bump API minor version number.
handling whenever a '\' is detected.
* signal.cc (sigaction): Make strace output more informative.
* sigproc.cc (pending_signals::add): Just index directly into signal array
rather than treating the array as a heap.
(pending_signals::del): Ditto.
(wait_sig): Don't send signal if we already have a similar signal queued.
* sigproc.h (call_signal_handler_now): Remove obsolete declaration.
* fhandler.h (class fhandler_dev_dsp): Add class Audio, class Audio_in
and class Audio_out members and audio_in_, audio_out_ pointers so
that future changes are restricted to file fhandler_dsp.cc.
* fhandler_dsp.cc (fhandler_dev_dsp::Audio): Add this class to treat
things common to audio recording and playback.
Add more format conversions.
(fhandler_dev_dsp::Audio::queue): New queues for buffer management
to fix incomplete cleanup of buffers passed to the wave device.
(fhandler_dev_dsp::Audio_in): New, added class to implement audio
recording.
(fhandler_dev_dsp::Audio_out): Rework to use functionality provided
by fhandler_dev_dsp::Audio. Allocate memory audio buffers late,
just before write.
(fhandler_dev_dsp::Audio_out::start): Size of wave buffer allocated
here depends on audio rate/bits/channels.
(fhandler_dev_dsp::Audio_in::start): Ditto.
(fhandler_dev_dsp::setupwav): Replaced by following function.
(fhandler_dev_dsp::Audio_out::parsewav): Does not setup wave device
any more. Discard wave header properly.
(fhandler_dev_dsp::open): Add O_RDONLY and_RDWR as legal modes.
Protect against re-open. Activate fork_fixup.
(fhandler_dev_dsp::ioctl): Protect against actions when audio is
active. SNDCTL_DSP_GETFMTS only returns formats supported by
mmsystem wave API, not all supported formats. SNDCTL_DSP_GETBLKSIZE
result now depends on current audio format.
(fhandler_dev_dsp::fixup_after_fork): Call fork_fixup for the Audio
classes to let them duplicate the CRITICAL_SECTION.
output.
(cygheap_fixup_in_child): Set alloc_sz to passed in size to ensure that
children will have the right size heap.
(_csbrk): Make output conditional on DEBUGGING.
(child_info::cygheap_alloc_sz): New field.
* cygheap.cc (init_cheap): Reduce size of cygwin stack until minimal hit when
attempting initial allocation.
(cygheap_setup_for_child): Use alloc_sz to create secondary memory mapped
entry. Store alloc_sz in cygheap_alloc_sz.
(cygheap_fixup_in_child): Use cygheap_alloc_sz to map parent's cygheap.
* cygheap.h (_CYGHEAPSIZE_SLOP): New define.
(CYGHEAPSIZE): Use _CYGHEAPSIZE_SLOP.
real swap file usage by requesting SystemPagefileInformation. Use
GlobalMemoryStatus as fallback.
* ntdll.h (_SYSTEM_INFORMATION_CLASS): Add SystemPagefileInformation.
(struct _SYSTEM_PAGEFILE_INFORMATION): Define.
* fhandler.h (fhandler_dev_tape::tape_get_pos): Declare with extra
parameter for partition number.
(fhandler_dev_tape::_tape_set_pos): Ditto.
(fhandler_dev_tape::tape_partition): New method.
(fhandler_dev_tape::tape_set_partition): New method.
* fhandler_tape.cc (fhandler_dev_tape::open): Call private methods
directly instead of ioctl.
(fhandler_dev_tape::ioctl): Use long erase on MTERASE by default.
Don't use absolute positioning on MTSEEK. Call tape_set_partition
on MTSETPART, tape_partition on MTMKPART.
(fhandler_dev_tape::tape_get_pos): Add partition number parameter.
Prefer logical position information over absolute position information.
Return partition number.
(fhandler_dev_tape::_tape_set_pos): Add partition number parameter.
Use in SetTapePosition.
(fhandler_dev_tape::tape_set_pos): Remove special TAPE_ABSOLUTE_BLOCK
handling.
(fhandler_dev_tape::tape_erase): Rewind before erasing.
(fhandler_dev_tape::tape_status): Rearrange slightly. Try to get a
MediaType even if no tape is loaded. Store active partition in
mt_resid as on Linux.
(fhandler_dev_tape::tape_partition): New method.
(fhandler_dev_tape::tape_set_partition): New method.
* include/cygwin/mtio.h: Fix copyright. Add comment to explain
mt_resid content.
* include/cygwin/version.h: Bump API minor number.
get the cygtls table lock.
* cygtls.h (_cygtls::remove_wq): Add wait argument.
* sigproc.cc (_cygtls::remove_wq): Honor wait argument when acquiring lock.
(proc_terminate): Don't NULL sync_proc_subproc since other threads may still
try to access it.
ERROR_SETMARK_DETECTED to EIO instead of ESPIPE.
Handle ERROR_FILEMARK_DETECTED.
* fhandler_tape.cc (TAPE_FUNC): Add comment that ERROR_BUS_RESET
has still to be handled correctly.
(fhandler_dev_tape::open): Accomodate fact that get.mt_dsreg
also contains density code.
(fhandler_dev_tape::ioctl): Rearrange slightly. Reset devbuf also on
MTNOP, MTWSM, MTSETBLK, MTSETDRVBUFFER, MTSETPART and MTMKPART.
(fhandler_dev_tape::tape_set_pos): Rearrange. Match behaviour to
the Linux tape driver.
(fhandler_dev_tape::tape_status): Call IOCTL_STORAGE_GET_MEDIA_TYPES_EX
if available. Return device type and density code in appropriate
mtget members.
* wincap.h (wincaps::has_ioctl_storage_get_media_types_ex): New element.
* wincap.cc: Implement above element throughout.
* include/cygwin/mtio.h: Add tape device types as returned by
IOCTL_STORAGE_GET_MEDIA_TYPES_EX.
(MT_TAPE_INFO): Use above type codes.
(struct mtget): Change mt_dsreg comment.
* fhandler.h (fhandler_dev_raw::write_file): New method, created
from former static function.
(fhandler_dev_raw::read_file): Ditto.
(reset_devbuf): New inline method.
(class fhandler_dev_tape): Add TAPE_GET_DRIVE_PARAMETERS
member `dp'.
(fhandler_dev_tape::write_file): New method.
(fhandler_dev_tape::read_file): Ditto.
(fhandler_dev_tape::tape_get_feature): Convert to inline method.
(fhandler_dev_tape::tape_error): New method, created from former
static function.
(fhandler_dev_tape::tape_get_blocksize): Remove declaration.
* fhandler_raw.cc (fhandler_dev_raw::write_file): New method, created
from former static function.
(fhandler_dev_raw::read_file): Ditto.
(fhandler_dev_raw::writebuf): Accomodate the fact that no devbuf
exists under variable block size condition.
(fhandler_dev_raw::raw_read): Ditto. Add local p pointer to simplify
pointer arithmetic.
(fhandler_dev_raw::raw_write): Always set devbufend to 0 when starting
with writing. Accomodate the fact that no devbuf exists under
variable block size condition.
* fhandler_tape.cc: Various formatting changes.
(TAPE_FUNC): New macro. Use throughout as tape function loop.
(get_ll): Convert into macro.
(IS_EOM): New macro.
(IS_EOF): New macro.
(fhandler_dev_tape::is_eom): Use IS_EOM macro.
(fhandler_dev_tape::is_eof): Use IS_EOF macro.
(fhandler_dev_tape::write_file): New method.
(fhandler_dev_tape::read_file): New method.
(fhandler_dev_tape::open): Get drive information block here once.
(fhandler_dev_tape::lseek): Remove unneeded duplicate code.
(fhandler_dev_tape::dup): Duplicate drive information block.
(fhandler_dev_tape::ioctl): Remove drvbuf in variable block size mode.
Return ERROR_INVALID_BLOCK_LENGTH instead of ERROR_MORE_DATA if
buffer contains data which would get lost on buffer size changing.
Use absolute tape positioning also if drive only supports logical
block positioning.
(fhandler_dev_tape::tape_error): New method, created from former
static function.
(fhandler_dev_tape::tape_get_pos): Allow logical block reporting.
Workaround tape driver bug.
(fhandler_dev_tape::_tape_set_pos): Reset device buffer and flags
after successful repositioning.
(fhandler_dev_tape::tape_set_pos): Allow logical block positioning.
Workaround tape driver bug.
(fhandler_dev_tape::tape_erase): Use dp instead of calling
GetTapeParameters.
(fhandler_dev_tape::tape_prepare): Ditto.
(fhandler_dev_tape::tape_get_blocksize): Remove.
(fhandler_dev_tape::tape_set_blocksize): Don't call tape_get_blocksize.
Error handling already done in fhandler_dev_tape::ioctl.
(fhandler_dev_tape::tape_status): Remove local `dp' variable.
Accomodate logical tape reporting. Call tape_get_feature instead
of accessing feature words directly.
(fhandler_dev_tape::tape_compression): Use dp instead of calling
GetTapeParameters. Fix resetting datcompression.
(_cygtls::wq): Declare.
* cygtls.cc (_cygtls::fixup_after_fork): Clear wq.thread_ev to avoid using an
invalid event handle in forked process.
* dcrt0.cc (waitq_storage): Delete.
(threadstuff): Remove waitq_storage.
* perthread.h (per_thread_waitq): Delete.
(waitq_storage): Delete declaration.
* sigproc.cc (sigproc_init): Remove perthread waitq consideration.
* sigproc.h (waitq): Delete declaration.
* wait.cc (wait4): Use _my_tls waitq structure rather than per_thread.
* cygtls.h (_cygtls::newmask): Delete member.
(_cygtls::deltamask): New member.
* gendef (_sigdelayed): Replace the call to set_process_mask by a call to
set_process_mask_delta.
* exceptions.cc (handle_sigsuspend): Do not filter tempmask. Or
SIG_NONMASKABLE in deltamask as a flag.
(_cygtls::interrupt_setup): Set deltamask only.
(set_process_mask_delta): New function.
(_cygtls::call_signal_handler): Replace the first call to set_process_mask by a
call to set_process_mask_delta.
* tlsoffsets.h: Regenerate.
* exceptions.cc: Remove some __I386__ conditionals.
(handle_exceptions): Move ppid test to outside of a loop for efficiency.
(setup_handler): Make debugging output more wordy.
(_cygtls::call_signal_handler): To avoid a race, use lock/unlock to synchronize
with signal thread and ensure that signal_arrived event has actually been set.
* gendef (_sigfe): Use ebx for all sigstack manipulations to ensure that the
register is saved. Move setting of incyg to within stack lock to avoid
setup_handler confusion.
(_sigbe): Use ebx for all sigstack manipulations to ensure that the register is
saved.
(_cygtls::pop): Ditto.
(_cygtls::lock): Ditto.
(stabilize_sig_stack): Ditto.
(setjmp): Ditto.
(longjmp): Ditto.
function, in an exception, spinning, or locked.
* gendef (_sigfe): Move incyg setting earlier.
(sigreturn): Set incyg flag to avoid interrupting called cygwin functions.
(sigdelayed): Ditto.
(stabilize_sig_stack): Ditto.
* sigproc.cc (proc_subproc): Don't restore process lock early in exec case.
* cygtls.h: Reorganize fields in _cygtls slightly.
* tlsoffsets.h: Regenerate.
could conceivably exit before function returns, rendering the child's shared
memory area invalid.
* cygtls.h (_cygtls::incyg): Declare new field.
(_cygtls::in_exception): Define new function.
* exceptions.cc (setup_handler): Remove locked flag. Use 'incyg' flag and
in_exception function to determine when we're in a cygwin function.
(_cygtls::call_signal_handler): Decrement incyg flag prior to calling a
handler. Increment it on return.
* gendef (_sigfe): Increment incyg flag. Use testl for zero testing rather
than orl, for consistency.
(_sigbe): Decrement incyg flag. Use testl for zero testing rather than orl,
for consistency.
(_cygtls::pop): Use testl for zero testing rather than orl, for consistency.
(stabilize_sig_stack): Ditto.
New define.
(PTHREAD_NORMAL_MUTEX_INITIALIZER_NP): Ditto.
(PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP): Ditto.
* thread.cc (pthread_mutex::is_good_initializer):
Check for all posssible initializers
(pthread_mutex::is_good_initializer_or_object): Ditto.
(pthread_mutex::is_good_initializer_or_bad_object): Ditto.
(verifyable_object_isvalid): Support up to three static
initializers.
(verifyable_object_isvalid (void const *,long)): Remove.
(pthread_cond::is_good_initializer_or_bad_object): Remove
unneeded objectState var.
(pthread_cond::init): Condition remains unchanged when creation
has failed.
(pthread_rwlock::is_good_initializer_or_bad_object): Remove
unneeded objectState var.
(pthread_rwlock::init): Rwlock remains unchanged when creation
has failed.
(pthread_mutex::init): Remove obsolete comment.
Mutex remains unchanged when creation has failed. Add support
for new initializers.
(pthread_mutex_getprioceiling): Do not create mutex,
just return ENOSYS.
(pthread_mutex_lock): Simplify.
(pthread_mutex_trylock): Remove unneeded local themutex.
(pthread_mutex_unlock): Just return EPERM if mutex is not
initialized.
(pthread_mutex_setprioceiling): Do not create mutex,
just return ENOSYS.
* thread.h (verifyable_object_isvalid): Support up to three
static initializers.
(verifyable_object_isvalid (void const *,long)): Remove
prototype.
(pthread_mutex::init): Add optional initializer to parameter
list.
variable block size, read only one block, read directly into user
supplied buffer, return ENOMEM if user supplied buffer is smaller
than size of next block to read. Use read2 instead of bytes_to_read
to count number of bytes read.
* fhandler_tape.cc (fhandler_dev_tape::open): Add debug output.
to force signal to be handled. Zero event here to prevent races.
* signal.cc (sigwaitinfo): Use local handle value for everything since signal
thread could zero event element at any time. Detect when awaking due to thread
not in mask and set return value and errno accordingly. Don't set signal
number to zero unless we've recognized the signal.
* sigproc.cc (sigq): Rename from sigqueue throughout.
* thread.cc (pthread::join): Handle signals received while waiting for thread
to terminate.
* cygwin.din: Export sighold, sigqueue.
* exceptions.cc (sighold): Define new function.
* signal.cc (handle_sigprocmask): Set correct errno for invalid signal.
Simplify debugging output.
(sigqueue): Define new function.
* include/cygwin/signal.h (sighold): Declare new function.
(sigqueue): Ditto.
* include/cygwin/version.h: Bump API minor version number.
* include/limits.h (TIMER_MAX): Define.
(_POSIX_TIMER_MAX): Ditto.
Add do_sig_wait parameter. Wait for signal_arrived if set to true.
Return WAIT_SIGNALED if signal arrived.
(pthread_cond::wait): Accomodate change to pthread::cancelable_wait.
(pthread::join): Ditto.
(semaphore::_timedwait): Ditto.
(semaphore::_wait): Ditto. Change to return int to allow status
feedback.
(semaphore::wait): Return return value from semaphore::_wait.
* thread.h (WAIT_SIGNALED): New definition.
(pthread::cancelable_wait): Change declaration. Define do_sig_wait
as false by default to not interfere with existing calls accidentally.
(semaphore::_wait): Declare int.
(copy1): New function.
(copyenc): New function.
(mount_item::fnmunge): Return error condition. Use new functions to copy
strings.
(mount_item::build_win32): Ditto.
(mount_info::conv_to_win32_path): Return error condition.
(cygwin_conv_to_posix_path): Return result of path conversion.
(cygwin_conv_to_full_posix_path): Ditto.
(return_with_errno): New macro.
(cygwin_win32_to_posix_path_list): Use new macro to potentially set errno.
(cygwin_posix_to_win32_path_list): Ditto.
* path.h (mount_item::fnmunge): Add size argument.
(mount_item::build_win32): Ditto.
a fork from a non-main thread.
* dcrt0.cc (initial_env): Eliminate parameter and just send DebugBreak when
appropriate.
(dll_crt0_0): Reflect parameter change to initial_env.
(dll_crt0_1): Don't call initial_env.
(setjmp): Import, add sig stack handling. Store sig stack info.
(longjmp): Call stabilize_sig_stack. Restore sig stack info.
* config/i386/setjmp.c: Remove.
(sigfe.s): Ensure that sigfe.s will be regenerated if it does not exist.
* dll_init.cc (dll_dllcrt0): Simplify initializing tests.
* exceptions.cc (setup_handler): Detect when stub caller is either spinning or
has acquired the lock after being suspended to avoid windows problems with
suspending a win32 API call.
* cygtls.h (_cygtls::spinning): Declare new element.
* gendef: Remove unused _siglist_index and _siglist declaration.
(_sigfe): Set spinning element when potentially looping, waiting for lock.
(_sigbe): Ditto.
(_cygtls::lock): Ditto.
(_longjmp): Ditto.
* tlsoffsets.h: Regenerate.
* pinfo.cc (_pinfo::exit): Set final exit state here. Call sigproc_terminate
if invoked with 'norecord'. Clear any residual _cygtls stuff.
* winsup.h (exit_states): Define ES_FINAL.
* spawn.cc (spawn_guts): Don't call proc_terminate specifically when execing.
Let _pinfo::exit handle that case.
* sigproc.cc (wait_subproc): Always exit loop early when proc_loop_wait.
* init.cc (munge_threadfunc): Eliminate unused argument.
(dll_entry): Reflect above change in call to munge_threadfunc.
* cygtls.h (_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::push): Make second argument mandatory.
(_cygtls::fixup_after_fork): Declare new function.
(_cygtls::lock): Ditto.
* cygtls.cc (_cygtls::fixup_after_fork): Define new function.
* dcrt0.cc (cygwin_finished_initializing): Define as bool.
(alloc_stack): Use _tlstop rather than arbitrary variable in probably vain
attempt to avoid strange fork problem on CTRL-C.
(dll_crt0_0): Remove obsolete winpids::init call.
* dll_init.cc (dll_dllcrt0): Detect forkee condition as equivalent to
initializing.
* winsup.h (cygwin_finished_initializing): Declare as bool.
* exceptions.cc (handle_exceptions): Rely on cygwin_finished_initializing to
determine how to handle exception during process startup.
(_cygtls::call_signal_handler): Rename from call_signal_handler_now.
(_cygtls::interrupt_now): Fill in second argument to push.
(signal_fixup_after_fork): Eliminate.
(setup_handler): Initialize locked to avoid potential inappropriate unlock.
Resume thread if it has acquired the stack lock.
(ctrl_c_handler): Just exit if ctrl-c is hit before cygiwn has finished
initializing.
* fork.cc (sync_with_child): Don't call abort since it can cause exit
deadlocks.
(sync_with_child): Change debugging output slightly.
(fork_child): Set cygwin_finished_initializing here. Call _cygtls fork fixup
and explicitly call sigproc_init.
(fork_parent): Release malloc lock on fork failure.
(vfork): Call signal handler via _my_tls.
* sigproc.cc (sig_send): Ditto.
* syscalls.cc (readv): Ditto.
* termios.cc (tcsetattr): Ditto.
* wait.cc (wait4): Ditto.
* signal.cc (nanosleep): Ditto.
(abort): Ditto.
(kill_pgrp): Avoid killing self if exiting.
* sync.cc (muto::acquire): Remove (temporarily?) ill-advised exiting_thread
check.
* gendef (_sigfe): Be more agressive in protecting stack pointer from other
access by signal thread.
(_cygtls::locked): Define new function.
(_sigbe): Ditto.
(_cygtls::pop): Protect edx.
(_cygtls::lock): Use guaranteed method to set eax to 1.
(longjmp): Aggressively protect signal stack.
* miscfuncs.cc (low_priority_sleep): Reduce "sleep time" for secs == 0.
* pinfo.cc (winpids::set): Counterintuitively use malloc's lock to protect
simultaneous access to the pids list since there are pathological conditions
which can cause malloc to call winpid.
(winpids::init): Eliminate.
* pinfo.h (winpids::cs): Eliminate declaration.
* pinfo.h (winpids::init): Eliminate definition.
* Makefile.in: Make version.h/cygwin.din version check a warning since it is
not foolproof.
* cygheap.h (CYGHEAPSIZE): Bump size down.
* cygtls.h (_threadinfo::stacklock): New element.
(_threadinfo::pop): Make regparm.
(_threadinfo::lock): New function.
(_threadinfo::unlock): New function.
* cygtls.cc (_threadinfo::push): Wait for a lock on the stack before performing
the operation.
(_threadinfo::pop): Move to another file.
* cygwin.din: More SIGFE changes.
* exceptions.cc (try_to_debug): Always display messages on console.
(handle_exceptions): Unwind stack only when actually about to call sig_send.
(setup_handler): Lock stack prior to performing any operations.
* gendef (_sigfe): Ditto.
(_sigbe): Ditto.
(_threadinfo::pop): Ditto. Move here.
* gen_tlsoffsets: Generate positive offsets.
* tlsoffsets.h: Regenerate.
security descriptor. Set both the process and the default DACLs.
* fork.cc (fork_parent): Use sec_none_nih security attributes.
* spawn.cc (spawn_guts): Ditto.
(well_known_*_sid): Change type to cygpsid.
(cygsid::init): Delete declaration.
* sec_helper.cc (well_known_*_sid): Define using above SID macro.
(cygsid::init): Delete.
* dcrt0.cc (dll_crt0_0): Do not call cygsid::init.
* security.cc (get_user_local_groups): Change the second argument type
to cygpsid.
version.
* debug.cc (__set_errno): Ditto.
* exceptions.cc (handle_sigsuspend): Remove spurious sig_dispatch_pending call.
(set_signal_mask): When there seem to be pending signals to dispatch, tell
signal_dispatch_pending/sig_send not to specifically call any handlers.
* sigproc.h (sig_dispatch_pending): Change declaration to void.
* sigproc.cc (sig_dispatch_pending): Change definition to void. Take an
argument to determine whether to tell sig_send to wait for handler to be
called.
* sigproc.cc (sig_send): Don't call signal handler when sig == __SIGFLUSHFAST.
(wait_sig): Honor __SIGFLUSHFAST. Guard against sigpacket::process nuking
si_signo.
* sigproc.h (__SIGFLUSHFAST): Define new special signal.
(sig_dispatch_pending): Change declaration to void. Take optional boolean
argument.
* fork.cc (vfork): Add debugging output.
signal_arrived and for sigCONT.
(sigpacket::process): Enforce sending of both signal_arrived and sigCONT, where
appropriate.
* gendef (sigreturn): Save tls pointer in ebx so that it can jump into
sigdelayed and use the same register.
initialization.
* dcrt0.cc (initial_env): Can it really be true that XP doesn't allow attaching
a debugger during DLL attach? Add temporary workaround.
(dll_crt0_0): Ensure that _impure_ptr stdio is initialized before any threads.
(dll_crt0_1): Move _impure_ptr initialization to dll_crt0_0.
* exceptions.cc (try_to_debug): Reinstate old method for looping while
debugging.
* syscalls.cc (_cygwin_istext_for_stdio): Regularize debugging output. Remove
hopefully extraneous check.
(setmode_helper): Add debugging output for improbable case. Use "binary"
rather "raw" for consistency.
access.
* fhandler.cc (fhandler_base::fhaccess): Return int. Use consistent variable
name for exit value. Exit at bottom, printing debugging information, like
other cygwin functions.
* fhandler.h (fhandler_base::has_acls): Make pass through for path_conv method.
(fhandler_base::isremote): Ditto.
(fhandler_base::is_fs_special): Ditto.
(fhandler_base::has_attribute): Ditto. Define new function.
(fhandler_base::fhaccess): Declare new function based on access_worker.
(fhandler_base::set_has_acls): Eliminate obsolete function.
(fhandler_base::set_isremote): Ditto.
* fhandler.cc (fhandler_base::fhaccess): Move from syscalls.cc and into
fhandler_base class. Use fhandler methods to access data rather than path_conv
stuff.
(fhandler_base::device_access_denied): Use fhaccess method.
* fhandler_disk_file.cc (fhandler_disk_file::opendir): Ditto.
(fhandler_base::open_fs): Remove calls to obsolete functions.
* fhandler_virtual.cc (fhandler_virtual::open): Ditto.
* winsup.h (access_worker): Remove obsolete access_worker declaration.
*syscalls.cc (access_worker): Move function to fhandler.cc.
(access): Use fhaccess method.
* pinfo.cc (_pinfo::set_ctty): Clarify debugging output.
* sigproc.cc (sig_dispatch_pending): Ditto.
* syscalls.cc (setsid): Perform minor rearrangement.
* exceptions.cc (setup_handler): Improve debugging output.
(call_signal_handler_now): Remove ill-advised debugger call.
* sigproc.cc (sigcomplete_main): Delete.
(sig_send): Honor FIXME and avoid using main thread's completion event for
everything or suffer races.
(pending_signals::add): Default stored mask to current process mask rather than
mask at time of signal send.
(wait_sig): Add debugging output.
* sigproc.h (sigpacket::mask_storage): Delete.
numbers to control special behavior for devices which take units.
* fhandler_raw.cc (fhandler_dev_raw::writebuf): Ditto.
(fhandler_dev_raw::fstat): Ditto.
(fhandler_dev_raw::open): Ditto.
(fhandler_dev_raw::ioctl): Ditto.
TIOCSWINSZ. It is not an error for ioctl_request_event to be missing.
* sigproc.cc (pending_signals::save): New function.
(pending_signals::restore): Ditto.
(sig_clear): Save/restore current queue pointer.
(wait_sig): Delete signals marked as such.
* sigproc.h (__SIGDELETE): New enum.
* cygmalloc.h: Make more concessions to attempts to get debugging malloc
working.
* debug.h: Ditto.
* dlmalloc.cc: Ditto.
* dlmalloc.h: Ditto.
* malloc_wrapper.cc: Ditto.
* perthread.h (perthread::create): Use calloc to ensure zeroed memory.
we're not closing what we think we're closing.
(sig_send): Improve debugging when exiting due to no_signals_available.
* wincap.h (wincaps::cant_debug_dll_entry): New element.
* wincap.cc: Implement above element throughout.
* dcrt0.cc (initial_env): Accommodate changes necessary to allow initial
debugging for systems which do not allow debugging in dll_entry.
(dll_crt0_0): Add initial_env call back here.
* Makefile.in (install-man): Use mandir as target for installation.
* include/cygwin/version.h: Bump DLL minor number to 7 (should have been done
earlier).
* cygwin.din: Make clock SIGFE. Add clock_gettime, sigwaitinfo, timer_create,
timer_delete, timer_settime.
* include/cygwin/version.h: Reflect above additions.
* fork.cc (fork_child): Call fixup_timers_after_fork.
* signal.cc (sigwait): Remove unused variable.
* timer.cc: New file.
(clock_gettime): Define new function.
(timer_tracker): Define new struct used by timer functions.
(timer_tracker::timer_tracker): New function.
(to_us): New function.
(timer_thread): New function.
(timer_tracker::settime): New function.
(timer_create): New function.
(timer_settime): New function.
(timer_delete): New function.
(fixup_timers_after_fork): New function.
* cygthread.cc: Bump thread count.
* signal.cc (sigwaitinfo): Define new function.
(sigwait): Redefine based on sigwaitinfo.
* include/cygwin/signal.h (sigwaitinfo): Declare.
(sigwait): Ditto.
* dtable.cc (dtable::vfork_parent_restore): Avoid double close of ctty when
ctty == ctty_on_hold.
* cygtls.h (_threadinfo::threadkill): New element.
(_threadinfo::set_threadkill): Declare new function.
(_threadinfo::reset_threadkill): Declare new function.
* dcrt0.cc (dcrt0_1): Call here so that it will be possible to attach to
running process with #(*& Windows Me/9x.
(initial_env): Try to initialize strace if uninitialized.
* gendef: Don't zero signal if threadkill is set since that will happen in the
called function.
* signal.cc (sigwait): Ensure cleanup in error conditions.
* sigproc.cc (sig_send): Clear packet mask storage.
(wait_subproc): Fill in child exit code in siginfo_t structure.
* thread.cc (pthread_kill): Set threadkill flag.
* tlsoffsets.h: Regenerate. Throughout, use siginfo_t to fill out all signal
information for "kernel" signals.
* cygtls.h (_threadinfo::set_siginfo): Declare new function.
* cygtls.cc (_threadinfo::set_siginfo): Define new function.
* dcrt0.cc (do_exit): Accommodate siginfo_t considerations.
* exceptions.cc (handle_exceptions): Ditto.
(sig_handle_tty_stop): Ditto.
(ctrl_c_handler): Use killsys() to send signal.
(sigpacket::process): Rename from sig_handle. Use siginfo_t field from
sigpacket for everything.
(tty_min::kill_pgrp): Accommodate siginfo_t considerations.
(fhandler_termios::bg_check): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::ioctl): Use killsys() to send signal.
* signal.cc (kill_worker): Rewrite to use siginfo_t second argument.
(kill_pgrp): Ditto.
(kill0): Define new function pulled from kill().
(kill): Rewrite as frontend to kill0.
(killsys): Define new function.
* sigproc.cc (sigelem): Eliminate.
(sigpacket): Move to sigproc.h. Subsume sigelem.
(pending_signals): Use sigpacket rather than sigelem for everything.
(sig_clear): Ditto.
(wait_sig): Ditto.
(sig_send): Rewrite to use siginfo_t argument.
(sig_send): New function wratpper to sig_send with siginfo_t argument.
(wait_subproc): Accommodate siginfo_t considerations.
* thread.cc (pthread_kill): Ditto.
* sigproc.h (sigpacket): Move here.
(sigpacket::process): Declare "new" function.
(sig_handle): Eliminate declaration.
(sig_send): Declare with new paramaters.
(killsys): Declare new function.
(kill_pgrp): Declare.
* winsup.h: Move some signal-specific stuff to sigproc.h.
* include/cygwin/signal.h: Tweak some siginfo_t stuff.
* fhandler_console.cc (fhandler_console::close): Fix debugging output.
(fhandler_console::fixup_after_fork): Decrement open_fhs prior to call to
fhandler_console::open since this would cause incrementing too much
incrementing in child processes. (Probably needs to be handled more elegantly
someday)
(fhandler_console::fixup_after_exec): Ditto.
compiler bug.
* autoload.cc (TryEnterCriticalSection): Remove.
* dcrt0.cc (dll_crt0_0): Delete inappropriate setting of _my_tls.stackptr to
NULL since it has really bad consequences. Make 'si' an automatic variable.
* cygtls.cc (_threadinfo::init_thread): Correct thinko which caused thread list
to be allocated every time.
* cygtls.h (CYGTLS_PADSIZE): Define as const int.
* sync.h: Make multiple inclusion safe.
(muto::next): Eliminate.
(muto::exiting_thread): New variable.
(muto::set_exiting_thread): New function.
(new_muto): Change to use different section for mutos since c++ give
inexplicable warning in some cases otherwise.
(new_muto1): Ditto.
* dcrt0.cc (do_exit): Call muto::set_exiting_thread here.
* sync.cc (muto_start): Eliminate.
(muto::acquire): Always give exiting thread a lock. Never give thread a lock
if exiting.
(muto::release): Ditto for releasing.
* dtable.cc (dtable::init_lock): Unline function and define here.
* dtable.h (lock_cs): Define as a muto since critical sections seem to work
oddly on Windows Me.
(lock): Accommodate switch to muto.
(unlock): Ditto.
* exceptions.cc (setup_handler): Don't worry about acquiring mutos since that
hasn't mattered for a long time.
(signal_exit): Ditto: muto stuff will be handled automatically on exit now.
* Makefile.in (DLL_IMPORTS): Link advapi32 to ensure proper DLL initialization.
* autoload.cc (RegCloseKey): Arbitrarily choose this function as a "seed" to
pull the advapi32 link library in. So, comment out the autoloading.
* cygtls.cc (_threadinfo::init_thread): Just clear CYGTLS_PADSIZE.
(_threadinfo::remove): Add debugging.
(_threadinfo::find_tls): Ditto.
* cygtls.h (_threadinfo::padding): Make zero length (for now?).
* dcrt0.cc (dll_crt0_0): Move more initialization here from dll_crt0_1.
(dll_crt0_1): See above.
* dtable.h (dtable::lock): Remove commented out critical section locking.
* dtable.h (dtable::init_lock): Remove commented out critical section locking.
* dtable.h (dtable::unlock): Remove commented out critical section locking.
* exceptions.cc (interruptible): bool'ize.
* init.cc (threadfunc_fe): Revert to storing threadfunc at stack bottom.
(munge_threadfunc): Ditto. Avoid adding overhead to calibration_thread.
(prime_threads): Don't initialize tls stuff.
(dll_entry): Make minor change to initialization order.
* tlsoffsets.h: Regenerate.
* sigproc.cc (wait_sig): Add sanity check for end of process thread exit.
* select.h: Make minor formatting change.
* Makefile.in: Add still more -fomit-frame-pointer functions.
* dtable.h (dtable::lock): New function.
(dtable::unlock): New function.
(dtable::init_lock): New function.
* cygheap.h (HEAP_TLS): Declare new enum value.
(init_cygheap::threadlist): Declare new array.
(init_cygheap::sthreads): Declare new variable.
(cygheap_fdmanip::~cygheap_fdmanip): Use new dtable lock/unlock functions.
(cygheap_fdnew::cygheap_fdnew): Ditto.
(cygheap_fdget::cygheap_fdget): Ditto.
* dtable.cc (dtable_init): Initialize fdtab critical section.
(dtable::fixup_after_fork): Ditto.
(dtable::fixup_after_exec): Ditto.
(dtable::dup2): Use lock/unlock calls to protect access to fdtab.
(dtable::find_fifo): Ditto.
(dtable::fixup_before_fork): Ditto.
(dtable::fixup_before_exec): Ditto.
(dtable::set_file_pointers_for_exec): Ditto.
(dtable::vfork_child_dup): Ditto.
(dtable::vfork_parent_restore): Ditto.
* syscalls.cc (close_all_files): Ditto.
* sync.h (muto::acquired): Declare new function.
(new_muto1): Declare new macro used to specify name of muto storage.
* sync.cc (muto::acquired): Define new function.
* cygthread.cc (cygthread::stub): Remove signal chain removal call since it is
handled during initialization now.
* cygthread.cc (cygthread::simplestub): Remove signal chain removal call since
it is handled during initialization now.
* cygtls.cc (sentry): New class used for locking. Use throughout.
(_threadinfo::reset_exception): Don't pop stack.
(_threadinfo::find_tls): Move from exceptions.cc.
(_threadinfo::init_thread): Initialize array of threads rather than linked
list. Take second argument indicating thread function for this thread.
(_threadinfo::remove): Search thread array rather than linked list. Use sentry
to lock. Only unlock if we got the lock.
(_threadinfo::find_tls): Ditto for first two.
(handle_threadlist_exception): Handle exceptions when manipulating the thread
list in case of premature thread termination.
(_threadinfo::init_threadlist_exceptions): Ditto.
* cygtls.h (TLS_STACK_SIZE): Decrease size.
(_threadinfo::padding): Add element to avoid overwriting lower part of stack.
(_threadinfo::remove): Add a "wait" argument to control how long we wait for a
lock before removing.
* exceptions.cc (init_exception_handler): Make global. Take argument to
control exception handler being set.
(ctrl_c_handler): Wait forever when removing self from signal chain.
(_threadinfo::find_tls): Move to cygtls.cc.
(sig_handle): Reorganize detection for thread-specific signals.
* heap.cc (heap_init): Rework slightly. Make fatal error more verbose. Remove
malloc initialization since it can't happen during dll attach.
* init.cc (search_for): Move address to search for on stack here.
(threadfunc_ix): Ditto for stack offset. Make shared so that stack walk
potentially only has to be done once when cygwin processes are running.
(threadfunc_fe): Use standard tls to store thread function (may change back
later).
(calibration_thread): New function. Potentially called to find threadfunc_ix.
(munge_threadfunc): Search for "search_for" value on stack. Output warning
when thread func not found on stack. Use standard tls to store thread
function.
(prime_threads): New function. Called to prime thread front end.
(dll_entry): Call dll_crt0_0 here when DLL_PROCESS_ATTACH. Call prime_threads
here. Try to remove thread from signal list here.
* sigproc.cc (wait_sig): Initialize threadlist exception stuff here.
* thread.cc (pthread::exit): Pass argument to signal list remove function.
* thread.h: Remove obsolete *ResourceLock defines.
* tlsoffsets.h: Regenerate.
* winsup.h (spf): Define temporary debug macro to be deleted later.
* dcrt0.cc (dll_crt0_0): New function, called during DLL initialization.
Mainly consists of code pulled from dll_crt0_1.
(dll_crt0_1): See above.
(_dll_crt0): Wait for initial calibration thread to complete, if appropriate.
Move some stuff to dll_crt0_0.
(initialize_main_tls): Accommodate argument change to
_thread_info::init_thread.
* fork.cc (fork_child): Ditto.
(sync_with_child): Fix debug message.
* external.cc (cygwin_internal): Remove special considerations for
uninitialized dll since initialization happens during dll attach now.
* dlfcn.cc (dlopen): Remove obsolete *ResourceLock calls.
(dlclose): Ditto.
* cygheap.h (init_cygheap::close_ctty): Declare new function.
* cygheap.cc (init_cygheap::close_ctty): Define new function.
* syscalls.cc (close_all_files): Use close_ctty.
(setsid): Ditto.
* cygthread.cc (cygthread::stub): Remove exception initialization.
* cygthread.cc (cygthread::stub): Remove exception initialization.
(cygthread::simplestub): Ditto.
* thread.cc (pthread::thread_init_wrapper): Ditto.
* cygtls.cc (_last_thread): Make static.
(_threadinfo::call2): Initialize exception handler here.
(_threadinfo::find_tls): Move here.
* exceptions.cc (_threadinfo::find_tls): Move.
* dcrt0.cc (__api_fatal): Add prefix info to message here rather than including
it in every call to function.
* winsup.h (api_fatal): Accommodate above change.
* debug.cc (add_handle): Don't do anything if cygheap not around.
(mark_closed): Ditto.
* dll_init.cc (dll_list::detach): Fix debug output.
* fork.cc (sync_with_child): Ditto.
(vfork): Improve debug output.
* heap.cc (heap_init): Ditto.
* exceptions.cc (try_to_debug): Clarify message when debugger attaches.
and open_fhs_on_hold (back) here.
* dcrt0.cc (_dll_crt0): Just set impure_ptr_ptr here and let later
initialization deal with tls.
* dtable.cc (dtable::vfork_child_fixup): Move ctty considerations here.
(dtable:vfork_parent_restore): And here.
* fork.cc (vfork): Reflect change to ctty handling.
* perthread.h (vfork_save::fhctty): Eliminate.
* cygwin.din: Make more exports NOSIGFE that will never be interrupted by a
signal.
* init.cc (dll_entry): Set stackptr to NULL to catch problems earlier.
signal handlers. Reorganize to cause potential SEGV on stack overflow.
* sigproc.cc (no_signals_available): Check sendsig value rather than relying on
obsolete sig_loop_wait.
(sigproc_terminate): Ditto.
(proc_can_be_signalled): Check sendsig value even for myself.
* tlsoffsets.h: Regenerate.
this change throughout.
* dtable.cc (dtable::add_archetype): Use correct count when iterating through
*active* archetypes.
* dtable.cc (dtable::fixup_after_exec): Close handle if close_on_exec and
archetype exists since archetype currently does not set windows close-on-exec
flag (FIXME).
* fhandler_tty.cc (fhandler_tty_slave::open): Change debugging output slightly.
(fhandler_tty_slave::close): Ditto.
(fhandler_tty_slave::fixup_after_fork): Just report on inherited use counts
since since archetype currently does not set windows close-on-exec flag
(FIXME).
* pinfo.cc (_pinfo::set_ctty): Change debugging output slightly.
* cygheap.cc (cygheap_init): Remove open_fhs accommodation and use count
reporting.
* perthread.h (vfork_save::fhctty): New element.
* perthread.h (vfork_save::open_fhs): New element.
* fork.cc (vfork): Muck around with ctty and open_fhs stuff, both of which are
now saved in the vfork_save structure.
(report_tty_counts): New macro. Use throughout for reporting tty use counts.
* dtable.cc (dtable::vfork_child_dup): Add debugging output for usecount
increment. Increment open_fhs if appropriate.
(dtable::vfork_parent_restore): "Close" artificially bumped ctty.
(dtable::vfork_child_fixup): Close ctty since it was bumped prior to vfork.
Save open_fhs around close since the closing of these handles has no effect on
the console.
* fhandler_tty.cc (fhandler_tty_slave::open): Reorganize calls to allow for
easier tracking of usecount modification.
(fhandler_tty_slave::open): Ditto.
(fhandler_tty_master::fixup_after_exec): Ditto.
* fhandler_tty.cc (fhandler_tty_master::init): Fix so that children do not
inherit master tty handles.
(fhandler_tty_master::fixup_after_fork): Remove, since it was never used.
(fhandler_tty_master::fixup_after_exec): Ditto.
* pinfo.cc (_pinfo::set_ctty): Increment open_fhs when ctty is set.
* cygheap.cc (cygheap_init): Ditto.
* syscalls.cc (setsid): *Always* call close on opened ctty since the archetype
is associated with the ctty and it counts as an opened handle.
* tty.cc (tty::common_init): Don't protect input/output mutex since it confuses
subsequent fork/execs when CYGWIN=tty.
environment variable after error_start detected.
* fhandler_tty_slave.cc (fhandler_tty_slave::close): Clarify debug message.
* syscalls.cc (setsid): Don't increment usecount here, since it will be
automatically decremented on close.
(__cygwin_user_data::impure_ptr): Ditto.
(_dll_crt0): Reluctantly initialize _impure_ptr here.
(initialize_main_tls): Eliminate local_clib initialization since it now happens
in init_thread.
* init.cc (dll_entry): Reluctantly remove code which set _impure_ptr to the
main thread's local_clib.
* perthread.h (reent_data): Remove obsolete declaration.
* sigproc.cc (proc_subproc): Add more debugging output.
(get_proc_lock): Ditto.
*dcrt0.cc (dll_crt0_1): Allocate argv[0] via malloc since main thread could
exit.
calculated mask in debugging output.
* sigproc.h (set_signal_mask): Reflect above change in declaration.
* path.cc (mount_item::build_win32): Take path apart before feeding it to
fnmunge. Throughout, change use of _reent_winsup()-> to _my_tls.locals.
instead. Throughout, remove obsolete MT_SAFE/_CYG_THREAD_FAILSAFE
considerations. Througout, add cygtls.h include.
* Makefile.in (DLL_OFILES): Add cygtls.o. Add some more objects to the
-fomit-frame-pointer list.
* acconfig.h: Remove obsolete settings.
* config.h.in: Ditto.
* bsdlib.cc: Add cygtls.h include.
* configure.in: Remove --enable-extra-threadsafe-checking.
* configure: Regenerate.
* cygtls.h (_local_storage): New struct renamed from _winsup_t (sic).
(_threadinfo:local_clib): Add new field.
(_threadinfo::locals): Ditto.
(_threadinfo::init_thread): Accept second _reent * argument.
(_threadinfo::call): Define as regparm.
(CYGTLS_PADSIZE): Remove unnecessary slop.
(_getreent): Define as a macro.
* thread.h: Remove _CYG_THREAD_FAILSAFE and MT_SAFE stuff.
(_winsup_t): Move to cygtls.h.
(ResourceLocks::ResourceLocks): Eliminate empty constructor.
(MTinterface::reents): Eliminate.
(MTinterface::thread_self_key): Eliminate.
(MTinterface::MTinterface): Eliminate.
* dcrt0.cc: Include stdio.h for _impure_ptr initialization.
(do_global_ctors): Remove run_ctors_p (sic) considerations. Don't call atexit
here.
(__main): Initialize destructors for user here.
(dll_crt0_1): Accept a dummy argument. Don't call init_thread here. Don't set
_impure_ptr here. Call do_global_ctors after more things have been
initialized.
(_dll_crt0): Define zeros buffer as max of needed size of CYGTLS_PADSIZE so
that it can be used for two purposes while minimizing stack usage. Initialize
_impure_ptr specifically, for speed. Call dll_crt0_1 with buffer argument.
(cygwin_dll_init): Call dll_crt0_1 with dummy argument.
* dtable.cc (dtable::find_unused_handle): Remove call to AssertResourceOwner.
* exceptions.cc: Move _threadinfo stuff to new file.
* cygtls.cc: New file.
* gentls_offsets: Accommodate increasing complexity of cygtls.h.
* hires.h (hires_base::~hires_base): Remove.
* init.cc (dll_entry): Remove setting of reents.
* thread.cc: Remove syslog.h include.
(__getreent): Simplify to use _my_tls.
(_reent_winsup): Delete.
(AssertResourceOwner): Delete.
(MTinterface::Init): Remove setting of _clib and _winsup, with all that
entails.
(MTinterface::fixup_after_fork): Ditto.
(pthread::thread_init_wrapper): Ditto. Also remove call to
set_tls_self_pointer.
(pthread::set_tls_self_pointer): Eliminate.
(pthread::get_tls_self_pointer): Just return _my_tls.tid;
(__reent_t::init_clib): Eliminate.
* tlsoffsets.h: Regenerate.
getsigmask.
* fhandler.h (fhandler_base): Make friends with close_all_files.
* pinfo.cc (_pinfo::set_ctty): Add more debugging.
* sigproc.cc (proc_can_be_signalled): Detect state when signal handler thread
is gone in target process as an EPERM situation. Set errno to ESRCH if process
doesn't exist.
(sigproc_terminate): Set sendsig to illegal value when closed.
(sig_send): Rely on proc_can_be_signalled setting the proper errno.
* syscalls.cc (close_all_files): Detect when all ttys are closed prior to
calling close_all_files. The ctty needs to be closed explicitly in this case.
* syscalls.cc (access_worker): Accommodate extra fhandler_base argument. Use
it instead of stat_worker to determine stat information, when appropriate.
* fhandler.cc (fhandler_base::device_access_denied): Pass fhandler pointer to
access_worker so that it can use the proper method for determining stat
information.
* fhandler_disk_file.cc (fhandler_disk_file::opendir): Ditto.
cygthread::stub2. Just return from function now since ExitThread is guaranteed
by automatic _threadinfo wrapper. Define as per ThreadProc convention.
(cygthread::stub2): Remove.
(cygthread::simplestub): Perform similar operations to cygthread::stub.
(cygthread::simplestub2): Remove.
* cygthread.h (cygthread::stub): Declare as per ThreadProc convention.
(cygthread::stub2): Remove declaration.
(cygthread::simplestub): Declare as per ThreadProc convention.
(cygthread::simplestub2): Remove declaration.
* cygtls.h (_threadinfo::call): Define first argument as per ThreadProc
convention.
(_threadinfo::call2): Ditto.
(_tlsbase): Define as char * pointer.
(_tlstop): New definition.
(_main_tls): Define here.
* dcrt0.cc (alloc_stack): Revert previous change which called init_thread since
information would be overwritten by fork later anyway.
(dll_crt0_1): Use _tlsbase and _tlstop for setting stack bottom, top.
* exceptions.cc: Move _main_tls declaration to cygtls.h.
(_threadinfo::call): Define first argument as per ThreadProc convention.
(_threadinfo::call2): Call ExitThread with thread function return value.
(_threadinfo::init_thread): Don't initialize cygtls to zero if input arg is
NULL.
* fork.cc (fork_child): Reset _main_tls here. Reinitialize parts of _my_tls
after copying data from parent.
* init.cc (threadfunc_fe): New function. Front-end for all threads created in
cygwin processes.
(munge_threadfunc): New function.
(dll_entry): Call munge_threadfunc to force the call of a thread wrapper.
* thread.cc (pthread::thread_init_wrapper): Perform similar operations to
cygthread::stub.
(pthread::thread_init_wrapper2): Remove.
* thread.h (pthread::thread_init_wrapper): Declare as per ThreadProc
convention.
(pthread::thread_init_wrapper2): Remove declaration.
* window.cc (Winmain): Just return from function now since ExitThread is
guaranteed by automatic _threadinfo wrapper.
(dtable::release): Move archetype deletion here.
(dtable::vfork_child_dup): Increment ctty usecount to catch later
close_all_files case in parent/child.
(dtable::vfork_child_fixup): Avoid using cygheap->foo where this should really
be using local references. Call close on archetyped handles since the handles
haven't had the noninherit flag set.
* fhandler_tty.cc (fhandler_tty_slave::close): Remove archetype deletion code.
Add defensive error message when DEBUGGING.
(fhandler_tty_common::set_close_on_exec): Use more robust method for checking
whether to set handles into noninherit if there is an archetype associated with
the fhandler.
(init_cheap::ctty): Change to pointer.
* dtable.h (dtable::find_archetype): Declare new function.
(dtable::add_archetype): Declare new function.
(dtable::delete_archetype): Declare new function.
(dtable::narchetypes): Declare.
(dtable::farchetypes): Declare.
(dtable::initial_archetype_size): Declare.
(dtable::dtable): Initialize new fields.
(dtable::initial_archetype_size): Declare.
* dtable.cc (dtable::find_archetype): Define new function.
(dtable::add_archetype): Define new function.
(dtable::delete_archetype): Define new function.
(dtable::initial_archetype_size): Define.
* fhandler.h (fhandler_base::archetype): Declare.
(fhandler_base::usecount): Declare.
* fhandler.cc (fhandler_base::fhandler_base): Initialize new fields.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Pass NULL to third
argument of set_ctty.
* fhandler_tty.cc (fhandler_tty_slave::open): Accommodate new archetype method
to create only one instance of a tty.
(fhandler_tty_slave::close): Don't close handles unless archetype usecount is
zero. When that happens, close archetype too.
(fhandler_tty_slave::dup): Just copy archetype. Set use count appropriately.
Set ctty, if appropriate.
(fhandler_tty_common::dup): Remove slave considerations.
(fhandler_tty_common::set_close_on_exec): Remove cygheap->ctty considerations.
* pinfo.cc (_pinfo::set_ctty): Accommodate new archetype methods.
* pinfo.h (_pinfo::set_ctty): Make third argument explicit.
* syscalls.cc (close_all_files): Decrement controlling tty use count before
closing all handles to allow controlling tty to be closed. Remove previous
controlling tty considerations.
if duping the current ctty.
(fhandler_tty_common::close): Move debugging statement earlier in function.
(fhandler_tty_slave::close): Return success when closing ctty.
* syscalls.cc (close_all_files): Avoid calling fhandler_tty_slave close method
so that open_fhs will not be decremented when closing cygheap ctty.
(setsid): Ditto.
* dcrt0.cc (do_exit): Reorganize to avoid leaving a critical section active
after vfork.
* fhandler.h (fhandler_tty_slave::get_unit): Remove regparm parameter since it
can't work in a virtualized function.
guaranteed to be accurate.
* fhandler_tty.cc (fhandler_tty_slave::open): Increment open_fhs appropriate
when copying ctty.
(fhandler_tty_slave::close): Remove special case handling for exit_state. Use
ctty < 0 check instead.
(fhandler_tty_common::close): Set io_handle to NULL after closing.
* syscalls.cc (close_all_files): Specifically close cygheap->ctty, if
appropriate.
throughout.
* tty.cc (tty::common_init): Remove call to SetKernelObjectSecurity and edit
some comments.
* cygheap.h (init_cygheap::ctty): Add new element.
* devices.in (device::parse): Remove special handling for /dev/tty.
* devices.cc: Regenerate.
* dtable.cc (build_fh_pc): Don't reset /dev/tty device. Let the device opener
do that.
* fhandler_termios.cc (tty_min::set_ctty): Redefine to _pinfo class.
* fhandler_tty.cc (fhandler_tty_common::set_close_on_exec): Avoid setting
noninherit flag for ctty.
* tty.h: Move BOOLs to bools.
(tty_min::set_ctty): Redeclare to _pinfo class.
* pinfo.cc (_pinfo::set_ctty): Define new function based on tty_min::set_ctty.
Change first argument from tty number to tty_min class.
* pinfo.h (_pinfo::set_ctty): Declare.
* fhandler_console.cc (fhandler_console::get_tty_stuff): Reflect move of
set_ctty to _pinfo class.
* fhandler_tty.cc (fhandler_tty_slave::open): Treat FH_TTY specially. Use
saved cygheap value if it exists. Otherwise convert to real device and save on
first time open.
(fhandler_tty_common::dup): Potentially set controlling tty if duping a slave
tty.
* syscalls.cc (setsid): Close controlling tty in cygheap.
* tty.cc: Change some BOOLs to bools.
(_threadinfo::init_thread): Rename from 'init'.
(_threadinfo::init): Declare new function.
(_threadinfo::protect_linked_list): Declare new critical section.
* dcrt0.cc (dll_crt0_1): Call init_thread to initialize thread stuff.
(_dll_crt0): Call _threadinfo::init prior to invoking dll_crt0_1.
* exceptions.cc (_threadinfo::init_thread): Rename from 'init'.
(_threadinfo::init): Define new function. Protect linked list manipulation
with new critical section.
(_threadinfo::call): Reflect function name change.
(_threadinfo::remove): Protect linked list manipulation with new critical
section
* gentls_offsets: Rework to allow multi-line "don't parse this" protection.
* init.cc (dll_entry): Don't remove threads info stuff here since the remove
function uses a critical section which can't be used during thread creation or
destruction.
* thread.cc (pthread::exit): Call _threadinfo remove function here.
Christopher Faylor
Corinna Vinschen
Pierre Humblet
Thomas Pfaff