This implements a set of vectorized math routines to be used by the
compiler auto-vectorizer. Versions for vectors with 2 lanes up to
64 lanes (in powers of 2) are provided.
These routines are based on the scalar versions of the math routines in
libm/common, libm/math and libm/mathfp. They make extensive use of the GCC
C vector extensions and GCN-specific builtins in GCC.
This implements a set of vectorized math routines to be used by the
compiler auto-vectorizer. Versions for vectors with 2 lanes up to
64 lanes (in powers of 2) are provided.
These routines are based on the scalar versions of the math routines in
libm/common, libm/math and libm/mathfp. They make extensive use of the GCC
C vector extensions and GCN-specific builtins in GCC.
By default, Newlib uses a huge object of type struct _reent to store
thread-specific data. This object is returned by __getreent() if the
__DYNAMIC_REENT__ Newlib configuration option is defined.
The reentrancy structure contains for example errno and the standard input,
output, and error file streams. This means that if an application only uses
errno it has a dependency on the file stream support even if it does not use
it. This is an issue for lower end targets and applications which need to
qualify the software according to safety standards (for example ECSS-E-ST-40C,
ECSS-Q-ST-80C, IEC 61508, ISO 26262, DO-178, DO-330, DO-333).
If the new _REENT_THREAD_LOCAL configuration option is enabled, then struct
_reent is replaced by dedicated thread-local objects for each struct _reent
member. The thread-local objects are defined in translation units which use
the corresponding object.
For the exit processing only members of _GLOBAL_REENT were used by default. If
the _REENT_GLOBAL_ATEXIT option was enabled, then the data structures were
provided through dedicated global objects. Make this option the default.
Remove the option. Rename struct _reent members _atexit and _atexit0 to
_reserved_6 and _reserved_7, respectively. Provide them only if
_REENT_BACKWARD_BINARY_COMPAT is defined.
Add the --enable-newlib-reent-binary-compat configure option. This option is
disabled by default. If enabled, then unused members in struct _reent are
preserved to maintain the structure layout.
This code has not been updated since 2016, and it looks like it has
rotted quite a bit since. It does not build against the current set
of phoenix sources -- I had to hack both the kernel headers and the
newlib headers up to get it to build, and I still have no idea if it
actually links or runs. It seems like the project itself has moved
away from newlib and to its own C library:
https://phoenix-rtos.com/documentation/libc/README.md
So since there's no interest from the phoenix folks to maintain this,
and it has a significant amount of non-standard code that we try to
keep up-to-date (without actually testing it), just punt it all.
This was disabled as part of the migration away from the cygnus option
as that implied no-dependencies.
We currently have 1-to-1 updates enabled -- if you touch a .c file,
the corresponding .o file will be rebuilt. But if you touch a header
file, none of the files using that get rebuilt.
Convert all the libc/ subdir makes into the top-level Makefile. This
allows us to build all of libc from the top Makefile without using any
recursive make calls. This is faster and avoids the funky lib.a logic
where we unpack subdir archives to repack into a single libc.a. The
machine override logic is maintained though by way of Makefile include
ordering, and source file accumulation in libc_a_SOURCES.
There's a few dummy.c files that are no longer necessary since we aren't
doing the lib.a accumulating, so punt them.
The winsup code has been pulling the internal newlib ssp library out,
but that doesn't exist anymore, so change that to pull the objects.
This kills off the last configure script under libc/ and folds it
into the top newlib configure script. The a lot of the logic was
already in the top configure script, so move what's left into a
libc/acinclude.m4 file.
Convert all the libm/ subdir makes into the top-level Makefile. This
allows us to build all of libm from the top Makefile without using any
recursive make calls. This is faster and avoids the funky lib.a logic
where we unpack subdir archives to repack into a single libm.a. The
machine override logic is maintained though by way of Makefile include
ordering, and source file accumulation in libm_a_SOURCES.
One thing to note is that this will require GNU Make because of:
libm_a_CFLAGS = ... $(libm_a_CFLAGS_$(subst /,_,$(@D)))
This was the only way I could find to supporting per-dir compiler
settings, and I couldn't find a POSIX compatible way of transforming
the variable content. I don't think this is a big deal as other
Makefiles in the tree are using GNU Make-specific syntax, but I call
this out as it's the only one so far in the new automake code that
I've been writing.
Automake doesn't provide precise control over the output object names
(by design). This is fine by default as we get consistent names in all
the subdirs: libm_a-<source>.o. But this relies on using the same set
of compiler flags for all objects. We currently compile libm/common/
with different optimizations than the rest.
If we want to compile objects differently, we can create an intermediate
archive with the subset of objects with unique flags, and then add those
objects to the main archive. But Automake will use a different prefix
for the objects, and thus we can't rely on ordering to override.
But if we leverage $@, we can turn Automake's CFLAGS into a multiplex
on a per-dir (and even per-file if we wanted) basis. Unfortunately,
since $@ contains /, Automake complains it's an invalid name. While
GNU Make supports this, it's a POSIX extension, so Automake flags it.
Using $(subst) avoids the Automake warning to get a POSIX compliant
name, albeit with a GNU Make extension.
This kills off the last configure script under libm/ and folds it
into the top newlib configure script. The vast majority of logic
was already in the top configure script, so move the little that
is left into a libm/acinclude.m4 file.
This was only ever used for i?86-pc-linux-gnu targets, but that's been
broken for years, and has since been dropped. So clean this up too.
This also deletes the funky objectlist logic since it only existed for
the libtool libraries. Since it was the only thing left in the small
Makefile.shared file, we can punt that too.
This was added 20+ years ago. It seems to have very few (or no users)
as it only works on 32-bit x86 GNU/Linux (i.e. glibc) systems, and even
then only with old versions of glibc. It hasn't compiled in at least 5
years, but most likely been broken for more like 15 years -- it relies
on internal glibc APIs (like linuxthreads), and that code has changed
and been deleted significantly since.
This single target ends up dragging in a lot of non-trivial code that is
hard to keep working, and currently impossible to verify -- the libtool
and iconvdata and sys/linux/ code isn't used by anything else, but ends
up touching just about every build file in the tree. Punt the target so
we can start stripping out all these unique code paths.
This commit by itself just disables the target. We'll start deleting the
individual unused pieces in followups.
Now that we use AC_NO_EXECUTABLES, and we require a recent version of
autoconf, we don't need to define our own copies of these macros. So
switch to the standard AC_PROG_CC.
This logic was added to libc & libm to get it working again after some
reworks in the CPP handling, but now that that's settled, let's move
this to the common newlib configure logic. This will make it easier
to consolidate all the configure calls into the top-level newlib dir.
This does create a lot of noise in the generate scripts, but that's
because of the ordering of the calls, not because of correctness. We
will try to draw that back down in follow up commits as we modernize
the toolchain calls in here.
We've been using both libc_cv_ and newlib_cv_ for our cache vars.
Let's consolidate on newlib_cv_ to avoid conflicts with glibc which
is already using the libc_cv_ prefix.
Since commit dcbff9eea7 ("newlib: merge
iconvdata into top-level Makefile"), there is no configure script in
the iconvdata/ subdir, so this call will just issue a warning and not
do anything useful. Punt it.
When using the top-level configure script but subdir Makefiles, the
newlib_basedir value gets a bit out of sync: it's relative to where
configure lives, not where the Makefile lives. Move the abs setting
from the top-level configure script into acinclude.m4 so we can rely
on it being available everywhere. Although this commit doesn't use
it anywhere, just lays the groundwork.
Commit dd23de27c8 ("newlib: libc: install
CRT0 straight out of subdir") got rid of the libc/sys/ intermediate for
copying the file up, but the top-level newlib/ dir was still expecting
a libc/crt0.o to exist so it could install. Update that to also look
for the crt0 file directly under libc/ like we already do for crt1.
This is already handled by autotools for us automatically. You can
tell as the generated output is exactly the same other than deleting
a few blank lines.
It's unclear why this was added originally, but assuming it was needed
20 years ago, it shouldn't be explicitly required nowadays. Current
versions of autotools already take care of exporting LDFLAGS to the
Makefile as needed (things are actually getting linked). That's why
the configure diffs show LDFLAGS still here, but shifted to a diff
place in the output list. A few dirs stop exporting LDFLAGS, but
that's because they don't do any linking, only compiling, so it's
correct.
As for the use of $ldflags instead of the standard $LDFLAGS, I can't
really explain that at all. Just use the right name so users don't
have to dig into why their setting isn't respected, and then use a
non-standard name instead. Adjust the testsuite to match.
The current newlib multilib logic is almost exactly the same as the
config/multi.m4, and the differences should be minor, so switch over
to that to delete custom logic on ourside.
Now that we require a recent version of autoconf, we can rely on this
macro working. This change was already made to libm, but these other
dirs were missed as I didn't notice it being duplicated in 3 places.
Now that newlib.hin has been brought up to date and all of its defines
are produced by configure, we can switch it to using autoheader without
manual editing. This relies on a few pieces:
* Moving the header & footer into configure.ac via AH_TOP & AH_BOTTOM.
* Running a post-process step on newlib.h to delete all the defines we
didn't export ourselves. Basically, anything without a _ prefix.
This will leave behind some spurious comments in newlib.h related to
the defines we filtered out, but should be harmless, so it's probably
not worth the effort to construct a more complicated sed expression to
also strip those out.
The list of iconv to/from defines is hand maintained in newlib.hin.
Lets leverage mkdeps.pl to generate this list automatically from the
list of known encodings. The newlib.hin list is up-to-date, so the
list in iconv.m4 matches the list already generated.
This will make it easier to move newlib.h to use autoheader directly.
We only want the newlib version defines in our hand curated version
file, _newlib_version.h, not in the template header, newlib.h, so
using AC_DEFINE doesn't make much sense.
Sync these back from newlib.hin to configure.ac, and touchup some of
the forms to be consistent (like being full sentences). Also use the
AC_DEFINE-vs-AC_DEFINE_UNQUOTED macros correctly. This will make it
easier to re-enable autoheader for managing newlib.hin.
This define is only used by newlib internally, so stop exporting it
as HAVE_INITFINI_ARRAY since this can conflict with defines packages
use themselves.
We don't really need to add _ to HAVE_INIT_FINI too since it isn't
exported in newlib.h, but might as well be consistent here.
We can't (easily) add this to newlib_cflags like HAVE_INIT_FINI is
because this is based on a compile-time test in the top configure,
not on plain shell code in configure.host. We'd have to replicate
the test in every subdir in order to have it passed down.
Since AM_INIT_AUTOMAKE calls AC_PROG_AWK, and some configure.ac
scripts call it too, we end up testing for awk multiple times. If
we change NEWLIB_CONFIGURE to require the macro instead, then it
makes sure it's always expanded, but only once.
While we're here, do the same thing with AC_PROG_INSTALL since it
is also called by AM_INIT_AUTOMAKE, although it doesn't currently
result in duplicate configure checks.
The AC_LIBTOOL_WIN32_DLL macro has been deprecated for a while and code
should call LT_INIT with win32-dll instead. Update the calls to match.
The generated code is noisy not because of substantial differences, but
because the order of some macros change (i.e. instead of calling AS and
then CC, CC is called first and then AS).
This matches what the other GNU toolchain projects have done already.
The generated diff in practice isn't terribly large. This will allow
more use of subdir local.mk includes due to fixes & improvements that
came after the 1.11 release series.
The newlib & libgloss dirs are already generated using autoconf-2.69.
To avoid merging new code and/or accidental regeneration using diff
versions, leverage config/override.m4 to pin to 2.69 exactly. This
matches what gcc/binutils/gdb are already doing.
The README file already says to use autoconf-2.69.
To accomplish this, it's just as simple as adding -I flags to the
top-level config/ dir when running aclocal. This is because the
override.m4 file overrides AC_INIT to first require the specific
autoconf version before calling the real AC_INIT.
Libtool needs to get BSD-format (or MS-format) output out of the system
nm, so that it can scan generated object files for symbol names for
-export-symbols-regex support. Some nms need specific flags to turn on
BSD-formatted output, so libtool checks for this in its AC_PATH_NM.
Unfortunately the code to do this has a pair of interlocking flaws:
- it runs the test by doing an nm of /dev/null. Some platforms
reasonably refuse to do an nm on a device file, but before now this
has only been worked around by assuming that the error message has a
specific textual form emitted by Tru64 nm, and that getting this
error means this is Tru64 nm and that nm -B would work to produce
BSD-format output, even though the test never actually got anything
but an error message out of nm -B. This is fixable by nm'ing *nm
itself* (since we necessarily have a path to it).
- the test is entirely skipped if NM is set in the environment, on the
grounds that the user has overridden the test: but the user cannot
reasonably be expected to know that libtool wants not only nm but
also flags forcing BSD-format output. Worse yet, one such "user" is
the top-level Cygnus configure script, which neither tests for
nor specifies any BSD-format flags. So platforms needing BSD-format
flags always fail to set them when run in a Cygnus tree, breaking
-export-symbols-regex on such platforms. Libtool also needs to
augment $LD on some platforms, but this is done unconditionally,
augmenting whatever the user specified: the nm check should do the
same.
One wrinkle: if the user has overridden $NM, a path might have been
provided: so we use the user-specified path if there was one, and
otherwise do the path search as usual. (If the nm specified doesn't
work, this might lead to a few extra pointless path searches -- but
the test is going to fail anyway, so that's not a problem.)
(Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a
symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where
*that* is a symlink to /usr/bin/nm.)
ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
PR libctf/27967
* libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided
NM, if there is one. Run nm on itself, not on /dev/null, to avoid
errors from nms that refuse to work on non-regular files. Remove
other workarounds for this problem. Strip out blank lines from the
nm output.
This reports common symbols like GNU nm, via a type code of 'C'.
ChangeLog
2021-09-27 Nick Alcock <nick.alcock@oracle.com>
PR libctf/27967
* libtool.m4 (lt_cv_sys_global_symbol_pipe): Augment symcode for
Solaris 11.
Jeff Johnston
Kwok Cheung Yeung
Matt Joyce
Sebastian Huber
Mike Frysinger
Nick Alcock