This was only ever used for i?86-pc-linux-gnu targets, but that's been
broken for years, and has since been dropped. So clean this up too.
This also deletes the funky objectlist logic since it only existed for
the libtool libraries. Since it was the only thing left in the small
Makefile.shared file, we can punt that too.
This was only used by the i?86-pc-linux-gnu target which we've removed,
and even though it's using a "sys/linux/" dir to make it sound like it
only depends on the Linux kernel, it's actually tied to glibc APIs built
on top of Linux. Since the code relies on internal glibc APIs and has
been broken for some time, punt it all. If someone wants to bring it
back, they can try and actually keep the Linux-vs-glibc APIs separate.
This was added 20+ years ago. It seems to have very few (or no users)
as it only works on 32-bit x86 GNU/Linux (i.e. glibc) systems, and even
then only with old versions of glibc. It hasn't compiled in at least 5
years, but most likely been broken for more like 15 years -- it relies
on internal glibc APIs (like linuxthreads), and that code has changed
and been deleted significantly since.
This single target ends up dragging in a lot of non-trivial code that is
hard to keep working, and currently impossible to verify -- the libtool
and iconvdata and sys/linux/ code isn't used by anything else, but ends
up touching just about every build file in the tree. Punt the target so
we can start stripping out all these unique code paths.
This commit by itself just disables the target. We'll start deleting the
individual unused pieces in followups.
The top level dir isn't doing anything interesting, just recursing into
subdirs. So this change isn't terribly exciting. But it sets us up for
doing more fun stuff in follow up commits.
[TODO] Check test targets
The common $DO variable is used by the multilib logic to control which
target to multiplex. But the m68k subdir is also using $DO to control
which target (m68k or fido) to build. As we flatten things to automake,
this conflict shows up and breaks the m68k build. Just rename the m68k
variable to something unique to avoid it.
Now that we use AC_NO_EXECUTABLES, and we require a recent version of
autoconf, we don't need to define our own copies of these macros. So
switch to the standard AC_PROG_CC.
This logic was added to libc & libm to get it working again after some
reworks in the CPP handling, but now that that's settled, let's move
this to the common newlib configure logic. This will make it easier
to consolidate all the configure calls into the top-level newlib dir.
This does create a lot of noise in the generate scripts, but that's
because of the ordering of the calls, not because of correctness. We
will try to draw that back down in follow up commits as we modernize
the toolchain calls in here.
This code is a bit more convoluted than it needs to be. GPR_SOURCES
is never set to anything, and the automake checks use negative logic
to add the SP & DP source files to dedicated variables that are only
expanded once. Get rid of the unused variable, use normal boolean
logic, and collapse the source settings into a single variable.
On second thought, we don't actually need this script.
Express the entire action as sufficiently simple Makefile rule.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
This allows building the libc & libm pages in parallel, and drops
the duplication in the subdirs with the chew/chapter settings.
The unused rules in Makefile.shared are left in place to minimize
noise in the change.
This doesn't migrate all the docs, just the libc's manual (pdf/info).
This is to show the basic form of migrating the chew files.
For subdirs that didn't have any docs, I've stripped their settings
for clarity. If someone wanted to suddenly add docs, they can add
the corresponding Makefile.inc files easily.
THe stdio subdir is actually required by the documentation. The
stdio/def is handled dynamically, but libc.texi always expects it
to be included, and fails if it isn't. So making it required when
building docs is safe.
The xdr subdir is handled dynamically, but it doesn't include any
docs, so the dynamic logic isn't (currently) adding any value. So
making it required when building docs is safe.
That leaves: iconv, stdio64, posix, and signal subdirs. The chapters
have a little disclaimer saying they are system-dependent, but even
then, imo having stable manuals regardless of the target is preferable,
and we can add more disclaimer language to these chapters if we want.
This doesn't touch the man page codepaths, just the info/pdf.
Commit 754f8def0d ("libgloss: merge stub
arch configure scripts up a level") had an unintended side-effect: the
MULTI* variables in the Makefiles no longer get rewritten at configure
time in the subdirs. Only the top-level Makefile still is. This is
because the configure integration of multilib (both the way libgloss
did it manually and the way AM_ENABLE_MULTILIB does it) only rewrites
"Makefile".
We could try propagating the MULTI* variables from libgloss/Makefile
down via FLAGS_TO_PASS, but this runs into a limitation: the multilib
logic uses this variable to switch from libgloss/ to each multilib
libgloss/, and libgloss uses this variable to enter subdirectories.
The latter we want, but the former ends up overridding the Makefile
environment. We could side-step that with some GNU Make directives,
but it feels like we're getting a bit too deep down the rabbit hole.
Instead, let's call config-ml.in ourselves for each subdir Makefile
that the top-level configure generates. This restores the previous
behavior and should be less risky in general.
This logic should be unnecessary when/if we switch libgloss over to
a non-recursive Automake build (since all build+install settings are
in the single libgloss/Makefile), but it'll be a while before we can
land that rework, so let's fix this up now.
- formatting
- use array pointer as argument rather than variable arguments
- syntactical fixes
- add comments
- drop unnecessary recomputation of all section VMAs.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Let automake manage whether the objects are included in lib.a. This
fixes failures after to commit 71086e8b2d
("newlib: delete (most) redundant lib_a_CCASFLAGS=$(AM_CCASFLAGS)") due
to automake generating different set of implicit rules, and the code in
here assuming the names of the generated objects.
In Makefile.am, add the value of $(V) to the dllfixdbg call.
In dllfixdbg, if V=1, print what the script is doing.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Change dllfixdbg to keep the input DLL intact and just generate
a new DLL matching the debug file. Fix Makefile rule accordingly.
The result is, cygwin0.dll is the original DLL created with full
debug sections and stays that way throughout the build process.
Only new-cygwin1.dll will become the stripped DLL matching with
the file containing the debug sections cygwin1.dbg. This is ok,
because commit ba02fef995 ("Cygwin: Makefile.am: fix DLL build rule")
made new-cygwin1.dll the DLL to be installed.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- If an UNC path is mounted to a drive using SMB3.11, accessing to
the drive fails with error "Too many levels of symbolic links."
This patch fixes the issue.
A single Makefile rule creates three files in three steps, the second
and third one never showing up in dependencies. The next step creating
the link lib only depends on the first of these files. Even if the
second or third step in the DLL build rule fails, the next make
invocation never picks up on this and just goes ahead creating the
link lib.
Fix this by splitting the DLL build rule into three rules, with
every step on the way depending on the previous rule. Also fix up
the names, TEST_DLL_NAME just doesn't cut it.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The current libgloss multilib logic is almost exactly the same as the
config/multi.m4, and the differences should be minor, so switch over
to that to delete custom logic on ourside.
The insertions here look larger and that's because none of the scripts
were declaring --enable-multilib explicitly even though they checked the
flag and changed behavior.
These subdirs have unique configure scripts to do some compiler tests.
The checks should work for all targets, so hoist them up to the top
libgloss dir. This should allow us to delete these subdir configure
scripts.
It means the top-level gains autoheader support, but that's fine.
It wasn't exporting any defines previously (i.e. -D into CPPFLAGS),
and all of the defines it now exports are only used by code in the
libnosys subdir which was expecting to have a config.h.
We've been using both libc_cv_ and newlib_cv_ for our cache vars.
Let's consolidate on newlib_cv_ to avoid conflicts with glibc which
is already using the libc_cv_ prefix.
This isn't strictly necessary, but it makes for much clearer logs as
to what the target is doing, and provides cache vars for anyone who
wants to force the test a different way, and it lets the build cache
its own results when rerunning config.status.
Since commit dcbff9eea7 ("newlib: merge
iconvdata into top-level Makefile"), there is no configure script in
the iconvdata/ subdir, so this call will just issue a warning and not
do anything useful. Punt it.
Restore the call to AC_NO_EXECUTABLES -- I naively assumed in commit
2e9aa5f56c ("newlib: update preprocessor
configure checks") that checking for a preprocessor would not involve
linking code. Unfortunately, autoconf will implicitly check that the
compiler "works" before allowing it to be used, and that involves a
link test, and that fails because newlib provides the C library which
is needed to pass a link test.
There is some code in NEWLIB_CONFIGURE specifically to help mitigate
these, but it's not kicking in here for some reason, so let's just add
the AC_NO_EXECUTABLES call back until we can unwind that custom logic.
Additionally, we have to call AC_PROG_CPP explicitly. This was being
invoked later on, but only in the use_libtool=yes codepath, and that
is almost never enabled.
This code snippet assumed it was only ever run in the top configure
script where srcdir would point to newlib/ which is parallel to the
winsup/ tree. This is incorrect for all of the subdir configure
scripts leading to bad -I flags in $(CC). Switch it over to the
new abs_newlib_basedir which should work in all subdirs.
When we had configure scripts in subdirs, the newlib_basedir value
was computed relative to that, and it'd be the same when used in the
Makefile in the same dir. With many subdir configure scripts removed,
the top-level configure & Makefile can't use the same relative path.
So switch the subdir Makefiles over to abs_newlib_basedir when they
use -I to find source headers.
Do this for all subdirs, even ones with configure scripts and where
newlib_basedir works. This makes the code consistent, and avoids
surprises if the configure script is ever removed in the future as
part of merging to the higher level.
Some of the subdirs were using -I$(newlib_basedir)/../newlib/ for
some reason. Collapse those too since newlib_basedir points to the
newlib source tree already.
When using the top-level configure script but subdir Makefiles, the
newlib_basedir value gets a bit out of sync: it's relative to where
configure lives, not where the Makefile lives. Move the abs setting
from the top-level configure script into acinclude.m4 so we can rely
on it being available everywhere. Although this commit doesn't use
it anywhere, just lays the groundwork.
Depending on the processing order of rules when installing in parallel,
these install rules might be processed before some other rule happens
to create the respective dirs. Make sure each one creates the needed
dirs before installing into them.
For arches that had their configure merged into the top-level, make
sure they don't still depend on a subdir configure script that no
longer exists. I had cleaned this up for some of the subdirs, but
these got lost in the shuffle.
Author: Mike Frysinger <vapier@gentoo.org>
Date: Mon Jan 17 22:20:20 2022 -0500
newlib: internalize HAVE_INITFINI_ARRAY
This define is only used by newlib internally, so stop exporting it
as HAVE_INITFINI_ARRAY since this can conflict with defines packages
use themselves.
We don't really need to add _ to HAVE_INIT_FINI too since it isn't
exported in newlib.h, but might as well be consistent here.
We can't (easily) add this to newlib_cflags like HAVE_INIT_FINI is
because this is based on a compile-time test in the top configure,
not on plain shell code in configure.host. We'd have to replicate
the test in every subdir in order to have it passed down.
Commit dd23de27c8 ("newlib: libc: install
CRT0 straight out of subdir") got rid of the libc/sys/ intermediate for
copying the file up, but the top-level newlib/ dir was still expecting
a libc/crt0.o to exist so it could install. Update that to also look
for the crt0 file directly under libc/ like we already do for crt1.
Mike Frysinger
Takashi Yano
Corinna Vinschen
Jon Turney
Jeff Law