powf: Fixed 2 bugs in the computation /* t_h=ax+bp[k] High */. (FreeBSD)

(1) The bit for the 1.0 part of bp[k] was right shifted by 4.  This
    seems to have been caused by a typo in converting e_pow.c to
    e_powf.c.
(2) The lower 12 bits of ax+bp[k] were not discarded, so t_h was
    actually plain ax+bp[k].  This seems to have been caused by a logic
    error in the conversion.

These bugs gave wrong results like:

    powf(-1.1, 101.0) = -15158.703 (should be -15158.707)
      hex values: BF8CCCCD 42CA0000 C66CDAD0 C66CDAD4

Fixing (1) gives a result wrong in the opposite direction
(hex C66CDAD8), and fixing (2) gives the correct result.

ucbtest has been reporting this particular wrong result on i386 systems
with unpatched libraries for 9 years.  I finally figured out the extent
of the bugs.  On i386's they are normally hidden by extra precision.
We use the trick of representing floats as a sum of 2 floats (one much
smaller) to get extra precision in intermediate calculations without
explicitly using more than float precision.  This trick is just a
pessimization when extra precision is available naturally (as it always
is when dealing with IEEE single precision, so the float precision part
of the library is mostly misimplemented).  (1) and (2) break the trick
in different ways, except on i386's it turns out that the intermediate
calculations are done in enough precision to mask both the bugs and
the limited precision of the float variables (as far as ucbtest can
check).

ucbtest detects the bugs because it forces float precision, but this
is not a normal mode of operation so the bug normally has little effect
on i386's.

On systems that do float arithmetic in float precision, e.g., amd64's,
there is no accidental extra precision and the bugs just give wrong
results.

Reference: 12be4e0d5a
Original Author: Bruce Evans

newlib/libm/math/ef_pow.c

@@ -173,7 +173,8 @@ ivln2_l  =  7.0526075433e-06; /* 0x36eca570 =1/ln2 tail*/
 	    GET_FLOAT_WORD(is,s_h);
 	    SET_FLOAT_WORD(s_h,is&0xfffff000);
 	/* t_h=ax+bp[k] High */
-	    SET_FLOAT_WORD(t_h,((ix>>1)|0x20000000)+0x0040000+(k<<21));
+        is = ((ix >> 1) & 0xfffff000U) | 0x20000000;
+        SET_FLOAT_WORD(t_h, is + 0x00400000 + (k << 21));
 	    t_l = ax - (t_h-bp[k]);
 	    s_l = v*((u-s_h*t_h)-s_h*t_l);
 	/* compute log(ax) */