libgloss: merge sparc configure script up a level

Move the minor sparc-specific logic to a dedicated variable so we can
merge its configure logic up a level.
This commit is contained in:
Mike Frysinger 2022-02-17 21:23:40 -05:00
parent 2f2b915505
commit 8d75828378
9 changed files with 38 additions and 4407 deletions

View File

@ -164,14 +164,15 @@ CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = arc/Makefile csky/Makefile epiphany/Makefile \
i386/Makefile m32r/Makefile m68hc11/Makefile nds32/Makefile \
m68k/Makefile pa/Makefile i960/Makefile sparc_leon/Makefile \
mips/Makefile riscv/Makefile rs6000/Makefile mn10200/Makefile \
mn10300/Makefile cr16/Makefile cris/Makefile crx/Makefile \
d30v/Makefile fr30/Makefile frv/Makefile ft32/Makefile \
lm32/Makefile mcore/Makefile mep/Makefile moxie/Makefile \
microblaze/Makefile mt/Makefile v850/Makefile visium/Makefile \
xc16x/Makefile xstormy16/Makefile m32c/Makefile \
msp430/Makefile rl78/Makefile rx/Makefile spu/Makefile \
tic6x/Makefile or1k/Makefile pru/Makefile nios2/Makefile
sparc/Makefile mips/Makefile riscv/Makefile rs6000/Makefile \
mn10200/Makefile mn10300/Makefile cr16/Makefile cris/Makefile \
crx/Makefile d30v/Makefile fr30/Makefile frv/Makefile \
ft32/Makefile lm32/Makefile mcore/Makefile mep/Makefile \
moxie/Makefile microblaze/Makefile mt/Makefile v850/Makefile \
visium/Makefile xc16x/Makefile xstormy16/Makefile \
m32c/Makefile msp430/Makefile rl78/Makefile rx/Makefile \
spu/Makefile tic6x/Makefile or1k/Makefile pru/Makefile \
nios2/Makefile
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
@ -719,6 +720,8 @@ i960/Makefile: $(top_builddir)/config.status $(top_srcdir)/i960/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sparc_leon/Makefile: $(top_builddir)/config.status $(top_srcdir)/sparc_leon/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
sparc/Makefile: $(top_builddir)/config.status $(top_srcdir)/sparc/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
mips/Makefile: $(top_builddir)/config.status $(top_srcdir)/mips/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
riscv/Makefile: $(top_builddir)/config.status $(top_srcdir)/riscv/Makefile.in

5
libgloss/configure vendored
View File

@ -743,7 +743,6 @@ CCAS
CCASFLAGS
CPP'
ac_subdirs_all='aarch64
sparc
arm'
# Initialize some variables set by options.
@ -2774,8 +2773,9 @@ subdirs="$subdirs aarch64"
subdirs="$subdirs sparc_leon"
;;
sparclet-*-aout* | sparc-*-elf* | sparc64-*-elf* | sparc86x-*-* | sparclite-*-*)
subdirs="$subdirs sparc"
ac_config_files="$ac_config_files sparc/Makefile"
subdirs="$subdirs sparc"
;;
sh*-*-pe | mips*-*-pe | *arm*-wince-pe)
config_wince=true
@ -6054,6 +6054,7 @@ do
"pa/Makefile") CONFIG_FILES="$CONFIG_FILES pa/Makefile" ;;
"i960/Makefile") CONFIG_FILES="$CONFIG_FILES i960/Makefile" ;;
"sparc_leon/Makefile") CONFIG_FILES="$CONFIG_FILES sparc_leon/Makefile" ;;
"sparc/Makefile") CONFIG_FILES="$CONFIG_FILES sparc/Makefile" ;;
"mips/Makefile") CONFIG_FILES="$CONFIG_FILES mips/Makefile" ;;
"riscv/Makefile") CONFIG_FILES="$CONFIG_FILES riscv/Makefile" ;;
"rs6000/Makefile") CONFIG_FILES="$CONFIG_FILES rs6000/Makefile" ;;

View File

@ -85,7 +85,8 @@ case "${target}" in
subdirs="$subdirs sparc_leon"
;;
sparclet-*-aout* | sparc-*-elf* | sparc64-*-elf* | sparc86x-*-* | sparclite-*-*)
AC_CONFIG_SUBDIRS([sparc])
AC_CONFIG_FILES([sparc/Makefile])
subdirs="$subdirs sparc"
;;
sh*-*-pe | mips*-*-pe | *arm*-wince-pe)
config_wince=true

View File

@ -93,7 +93,7 @@ OBJS = close.o fstat.o getpid.o isatty.o kill.o \
# variants (via runtime switches). However, the compiler [currently] doesn't.
# Of course, it may be the case that there isn't any cpu specific code in
# C source files, but there might be in the future.
CPU = @CPU@
CPU = @SPARC_CPU@
# sparc stuff (not sparclite or sparclet)
SPARC_ALL = $(CYGMON_BSP) $(CYGMON_CRT0) $(objdir)/cygmon.ld
@ -170,7 +170,7 @@ sparcl-stub.o: $(srcdir)/sparcl-stub.c $(srcdir)/../debug.h $(srcdir)/../debug.c
erc32-stub.o: $(srcdir)/erc32-stub.c $(srcdir)/../debug.h $(srcdir)/../debug.c
fixctors.o : $(srcdir)/fixctors.c
$(objdir)/cygmon.ld: @CYGMONLDSCRIPTTEMPL@
$(objdir)/cygmon.ld: @SPARC_CYGMONLDSCRIPTTEMPL@
sed 's/TARGET_OBJ_FORMAT/$($(CPU)_OBJ_FORMAT)/g;s/TARGET_RAM_START/$($(CPU)_RAM_START)/g;' < $(<) > $(objdir)/cygmon.ld
install: $($(CPU)_INSTALL)
@ -278,16 +278,12 @@ clean mostlyclean:
rm -f *.o *.a *.map *.x
distclean maintainer-clean realclean: clean
rm -f Makefile config.cache config.log config.status
rm -f Makefile
.PHONY: info dvi doc install-info clean-info
info doc dvi:
install-info:
clean-info:
Makefile: Makefile.in config.status @host_makefile_frag_path@ \
@target_makefile_frag_path@
$(SHELL) config.status
config.status: configure
$(SHELL) config.status --recheck
Makefile: Makefile.in ../config.status
cd .. && $(SHELL) config.status

View File

@ -0,0 +1,15 @@
SPARC_CPU=SPARC
case ${target_cpu} in
sparclite*) SPARC_CPU=SLITE ;;
sparclet*) SPARC_CPU=SPLET ;;
sparc64*) SPARC_CPU=SPARC64 ;;
sparc86x*) SPARC_CPU=SLITE ;;
esac
AC_SUBST(SPARC_CPU)
SPARC_CYGMONLDSCRIPTTEMPL=${srcdir}/sparc/cygmon.ld.src
case ${target_cpu} in
sparc64*) SPARC_CYGMONLDSCRIPTTEMPL=${srcdir}/sparc/cygmon-sparc64-ld.src ;;
sparclet-*-aout*) SPARC_CYGMONLDSCRIPTTEMPL=${srcdir}/sparc/cygmon.ld.src; AC_CONFIG_FILES([sparc/libsys/Makefile]) ;;
esac
AC_SUBST(SPARC_CYGMONLDSCRIPTTEMPL)

View File

@ -1,384 +0,0 @@
# generated automatically by aclocal 1.15.1 -*- Autoconf -*-
# Copyright (C) 1996-2017 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
# AM_CONDITIONAL -*- Autoconf -*-
# Copyright (C) 1997-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ([2.52])dnl
m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])dnl
AC_SUBST([$1_FALSE])dnl
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
_AM_SUBST_NOTMAKE([$1_FALSE])dnl
m4_define([_AM_COND_VALUE_$1], [$2])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
else
$1_TRUE='#'
$1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])
# Copyright (C) 1999-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery. Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
[$1], [CXX], [depcc="$CXX" am_compiler_list=],
[$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
[$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
[$1], [UPC], [depcc="$UPC" am_compiler_list=],
[$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
AC_CACHE_CHECK([dependency style of $depcc],
[am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named 'D' -- because '-MD' means "put the output
# in D".
rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_$1_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
am__universal=false
m4_case([$1], [CC],
[case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac],
[CXX],
[case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac])
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
# Solaris 10 /bin/sh.
echo '/* dummy */' > sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
# We check with '-c' and '-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle '-M -o', and we need to detect this. Also, some Intel
# versions had trouble with output in subdirs.
am__obj=sub/conftest.${OBJEXT-o}
am__minus_obj="-o $am__obj"
case $depmode in
gcc)
# This depmode causes a compiler race in universal mode.
test "$am__universal" = false || continue
;;
nosideeffect)
# After this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested.
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
msvc7 | msvc7msys | msvisualcpp | msvcmsys)
# This compiler won't grok '-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
am__obj=conftest.${OBJEXT-o}
am__minus_obj=
;;
none) break ;;
esac
if depmode=$depmode \
source=sub/conftest.c object=$am__obj \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_$1_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])
# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])
# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE([dependency-tracking], [dnl
AS_HELP_STRING(
[--enable-dependency-tracking],
[do not reject slow dependency extractors])
AS_HELP_STRING(
[--disable-dependency-tracking],
[speeds up one-time build])])
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
am__nodep='_no'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])dnl
_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
AC_SUBST([am__nodep])dnl
_AM_SUBST_NOTMAKE([am__nodep])dnl
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
# Copyright (C) 1999-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[{
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
case $CONFIG_FILES in
*\'*) eval set x "$CONFIG_FILES" ;;
*) set x $CONFIG_FILES ;;
esac
shift
for mf
do
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
# We used to match only the files named 'Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
# Grep'ing the whole file is not good either: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
dirpart=`AS_DIRNAME("$mf")`
else
continue
fi
# Extract the definition of DEPDIR, am__include, and am__quote
# from the Makefile without running 'make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`AS_DIRNAME(["$file"])`
AS_MKDIR_P([$dirpart/$fdir])
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
done
}
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking
# is enabled. FIXME. This creates each '.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])
# Check to see how 'make' treats includes. -*- Autoconf -*-
# Copyright (C) 2001-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
@echo this is the am__doit target
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# Ignore all kinds of additional output from 'make'.
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
am__include=include
am__quote=
_am_result=GNU
;;
esac
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
am__include=.include
am__quote="\""
_am_result=BSD
;;
esac
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
AC_MSG_RESULT([$_am_result])
rm -f confinc confmf
])
# Copyright (C) 2006-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
# This macro is traced by Automake.
AC_DEFUN([_AM_SUBST_NOTMAKE])
# AM_SUBST_NOTMAKE(VARIABLE)
# --------------------------
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
m4_include([../../config/depstand.m4])
m4_include([../../config/lead-dot.m4])
m4_include([../../config/multi.m4])
m4_include([../../config/override.m4])
m4_include([../acinclude.m4])

3937
libgloss/sparc/configure vendored

File diff suppressed because it is too large Load Diff

View File

@ -1,64 +0,0 @@
# Copyright (c) 1995, 1996 Cygnus Support
#
# The authors hereby grant permission to use, copy, modify, distribute,
# and license this software and its documentation for any purpose, provided
# that existing copyright notices are retained in all copies and that this
# notice is included verbatim in any distributions. No written agreement,
# license, or royalty fee is required for any of the authorized uses.
# Modifications to this software may be copyrighted by their authors
# and need not follow the licensing terms described here, provided that
# the new terms are clearly indicated on the first page of each file where
# they apply.
dnl Process this file with autoconf to produce a configure script.
AC_INIT(sparc-stub.c)
AC_CONFIG_AUX_DIR(../..)
AC_PROG_INSTALL
AC_CANONICAL_SYSTEM
LIB_AC_PROG_CC
AS=${AS-as}
AC_SUBST(AS)
AR=${AR-ar}
AC_SUBST(AR)
LD=${LD-ld}
AC_SUBST(LD)
AC_PROG_RANLIB
LIB_AM_PROG_AS
case ${target_cpu} in
sparclite*) CPU=SLITE ;;
sparclet*) CPU=SPLET ;;
sparc64*) CPU=SPARC64 ;;
sparc86x*) CPU=SLITE ;;
*) CPU=SPARC ;;
esac
AC_SUBST(CPU)
case ${target_cpu} in
sparc64*) CYGMONLDSCRIPTTEMPL=${srcdir}/cygmon-sparc64-ld.src ;;
sparclet-*-aout*) CYGMONLDSCRIPTTEMPL-${srcdir}/cygmon.ld.src; AC_CONFIG_FILES([libsys/Makefile]) ;;
*) CYGMONLDSCRIPTTEMPL=${srcdir}/cygmon.ld.src
esac
host_makefile_frag=`cd $srcdir/../config;pwd`/default.mh
target_makefile_frag=${srcdir}/../config/default.mt
dnl We have to assign the same value to other variables because autoconf
dnl doesn't provide a mechanism to substitute a replacement keyword with
dnl arbitrary data or pathnames.
dnl
host_makefile_frag_path=$host_makefile_frag
AC_SUBST(host_makefile_frag_path)
AC_SUBST_FILE(host_makefile_frag)
target_makefile_frag_path=$target_makefile_frag
AC_SUBST(target_makefile_frag_path)
AC_SUBST_FILE(target_makefile_frag)
AC_SUBST(CYGMONLDSCRIPTTEMPL)
AM_ENABLE_MULTILIB(, ../..)
AC_CONFIG_FILES([Makefile])
AC_OUTPUT

View File

@ -108,8 +108,8 @@ clean mostlyclean:
distclean maintainer-clean realclean: clean
rm -f Makefile
Makefile: Makefile.in ../config.status
cd .. && $(SHELL) config.status
Makefile: Makefile.in ../../config.status
cd ../.. && $(SHELL) config.status
stamp-srcs: Makefile template.S template_r.S
for f in $(TEMPLATE_SFILES:_=) ; \