libgloss: merge doc into top-level Makefile

Avoid a recursive make with this tiny subdir to speed things up a bit.
This commit is contained in:
Mike Frysinger 2022-02-01 23:46:57 -05:00
parent 7517551007
commit 492e5fe8b0
6 changed files with 388 additions and 227 deletions

View File

@ -3,6 +3,7 @@
ACLOCAL_AMFLAGS = -I . -I .. -I ../config
# Variables that will accumulate in subdirs.
info_TEXINFOS =
PHONY =
SUBDIRS = @subdirs@ .
@ -36,3 +37,9 @@ FLAGS_TO_PASS = \
"DESTDIR=$(DESTDIR)"
include $(top_srcdir)/../multilib.am
TEXINFO_TEX = ../texinfo/texinfo.tex
if HAVE_DOC
include doc/Makefile.inc
endif

View File

@ -88,6 +88,7 @@ POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
@HAVE_DOC_TRUE@am__append_1 = doc/porting.texi
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/depstand.m4 \
@ -103,13 +104,13 @@ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = doc/Makefile arc/Makefile epiphany/Makefile \
m32r/Makefile m68hc11/Makefile nds32/Makefile pa/Makefile \
i960/Makefile sparc_leon/Makefile riscv/Makefile \
rs6000/Makefile bfin/Makefile cr16/Makefile cris/Makefile \
crx/Makefile d30v/Makefile fr30/Makefile frv/Makefile \
ft32/Makefile lm32/Makefile mep/Makefile microblaze/Makefile \
mt/Makefile v850/Makefile visium/Makefile xc16x/Makefile \
CONFIG_CLEAN_FILES = arc/Makefile epiphany/Makefile m32r/Makefile \
m68hc11/Makefile nds32/Makefile pa/Makefile i960/Makefile \
sparc_leon/Makefile riscv/Makefile rs6000/Makefile \
bfin/Makefile cr16/Makefile cris/Makefile crx/Makefile \
d30v/Makefile fr30/Makefile frv/Makefile ft32/Makefile \
lm32/Makefile mep/Makefile microblaze/Makefile mt/Makefile \
v850/Makefile visium/Makefile xc16x/Makefile \
xstormy16/Makefile m32c/Makefile msp430/Makefile rl78/Makefile \
rx/Makefile spu/Makefile tic6x/Makefile iq2000/Makefile \
or1k/Makefile pru/Makefile nios2/Makefile libnosys/Makefile
@ -127,6 +128,47 @@ am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
am__v_DVIPS_0 = @echo " DVIPS " $@;
am__v_DVIPS_1 =
AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
am__v_MAKEINFO_1 =
AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
am__v_INFOHTML_0 = @echo " INFOHTML" $@;
am__v_INFOHTML_1 =
AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
am__v_TEXI2DVI_1 =
AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
am__v_TEXI2PDF_1 =
AM_V_texinfo = $(am__v_texinfo_@AM_V@)
am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
am__v_texinfo_0 = -q
am__v_texinfo_1 =
AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
am__v_texidevnull_0 = > /dev/null
am__v_texidevnull_1 =
am__dirstamp = $(am__leading_dot)dirstamp
INFO_DEPS = $(srcdir)/doc/porting.info
am__TEXINFO_TEX_DIR = $(srcdir)/../texinfo
DVIS = doc/porting.dvi
PDFS = doc/porting.pdf
PSS = doc/porting.ps
HTMLS = doc/porting.html
TEXINFOS = $(am__append_1)
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
@ -140,6 +182,34 @@ am__can_run_installinfo = \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__installdirs = "$(DESTDIR)$(infodir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
@ -280,6 +350,7 @@ top_srcdir = @top_srcdir@
ACLOCAL_AMFLAGS = -I . -I .. -I ../config
# Variables that will accumulate in subdirs.
info_TEXINFOS = $(am__append_1)
PHONY =
SUBDIRS = @subdirs@ .
tooldir = $(exec_prefix)/$(target_alias)
@ -313,13 +384,15 @@ MULTIDIRS =
MULTISUBDIR =
MULTIDO = true
MULTICLEAN = true
TEXINFO_TEX = ../texinfo/texinfo.tex
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
.SUFFIXES: .dvi .ps
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/../multilib.am $(am__configure_deps)
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/../multilib.am $(srcdir)/doc/Makefile.inc $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
@ -341,7 +414,7 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_srcdir)/../multilib.am $(am__empty):
$(top_srcdir)/../multilib.am $(srcdir)/doc/Makefile.inc $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
@ -366,8 +439,6 @@ $(srcdir)/config.h.in: $(am__configure_deps)
distclean-hdr:
-rm -f config.h stamp-h1
doc/Makefile: $(top_builddir)/config.status $(top_srcdir)/doc/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
arc/Makefile: $(top_builddir)/config.status $(top_srcdir)/arc/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
epiphany/Makefile: $(top_builddir)/config.status $(top_srcdir)/epiphany/Makefile.in
@ -442,6 +513,146 @@ nios2/Makefile: $(top_builddir)/config.status $(top_srcdir)/nios2/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
libnosys/Makefile: $(top_builddir)/config.status $(top_srcdir)/libnosys/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
doc/$(am__dirstamp):
@$(MKDIR_P) doc
@: > doc/$(am__dirstamp)
$(srcdir)/doc/porting.info: doc/porting.texi
$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
am__cwd=`pwd` && $(am__cd) $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
-o $@ $(srcdir)/doc/porting.texi; \
then \
rc=0; \
$(am__cd) $(srcdir); \
else \
rc=$$?; \
$(am__cd) $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
doc/porting.dvi: doc/porting.texi doc/$(am__dirstamp)
$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
`test -f 'doc/porting.texi' || echo '$(srcdir)/'`doc/porting.texi
doc/porting.pdf: doc/porting.texi doc/$(am__dirstamp)
$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
`test -f 'doc/porting.texi' || echo '$(srcdir)/'`doc/porting.texi
doc/porting.html: doc/porting.texi doc/$(am__dirstamp)
$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
-o $(@:.html=.htp) `test -f 'doc/porting.texi' || echo '$(srcdir)/'`doc/porting.texi; \
then \
rm -rf $@ && mv $(@:.html=.htp) $@; \
else \
rm -rf $(@:.html=.htp); exit 1; \
fi
.dvi.ps:
$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) $(AM_V_texinfo) -o $@ $<
uninstall-dvi-am:
@$(NORMAL_UNINSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
rm -f "$(DESTDIR)$(dvidir)/$$f"; \
done
uninstall-html-am:
@$(NORMAL_UNINSTALL)
@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
done
uninstall-info-am:
@$(PRE_UNINSTALL)
@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
(if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
uninstall-pdf-am:
@$(NORMAL_UNINSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
done
uninstall-ps-am:
@$(NORMAL_UNINSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
rm -f "$(DESTDIR)$(psdir)/$$f"; \
done
dist-info: $(INFO_DEPS)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for base in $$list; do \
case $$base in \
$(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
if test -f $$file; then \
relfile=`expr "$$file" : "$$d/\(.*\)"`; \
test -f "$(distdir)/$$relfile" || \
cp -p $$file "$(distdir)/$$relfile"; \
else :; fi; \
done; \
done
mostlyclean-aminfo:
-rm -rf doc/porting.t2d doc/porting.t2p
clean-aminfo:
-test -z "doc/porting.dvi doc/porting.pdf doc/porting.ps doc/porting.html" \
|| rm -rf doc/porting.dvi doc/porting.pdf doc/porting.ps doc/porting.html
maintainer-clean-aminfo:
@list='$(INFO_DEPS)'; for i in $$list; do \
i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
@ -550,9 +761,12 @@ distclean-tags:
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
check-am: all-am
check: check-recursive
all-am: Makefile config.h all-local
all-am: Makefile $(INFO_DEPS) config.h all-local
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(infodir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
@ -579,13 +793,14 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-rm -f doc/$(am__dirstamp)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-local mostlyclean-am
clean-am: clean-aminfo clean-generic clean-local mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
@ -595,81 +810,177 @@ distclean-am: clean-am distclean-generic distclean-hdr distclean-local \
dvi: dvi-recursive
dvi-am:
dvi-am: $(DVIS)
html: html-recursive
html-am:
html-am: $(HTMLS)
info: info-recursive
info-am:
info-am: $(INFO_DEPS)
install-data-am:
install-data-am: install-info-am
install-dvi: install-dvi-recursive
install-dvi-am:
install-dvi-am: $(DVIS)
@$(NORMAL_INSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
$(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
done
install-exec-am: install-exec-local
install-html: install-html-recursive
install-html-am:
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
d2=$$d$$p; \
if test -d "$$d2"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d2"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info: install-info-recursive
install-info-am:
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
$(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
fi; \
for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
echo "$$ifile"; \
else : ; fi; \
done; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
@$(POST_INSTALL)
@if $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
done; \
else : ; fi
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive
install-ps-am:
install-ps-am: $(PSS)
@$(NORMAL_INSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
maintainer-clean-local
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-local
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-local
mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
mostlyclean-local
pdf: pdf-recursive
pdf-am:
pdf-am: $(PDFS)
ps: ps-recursive
ps-am:
ps-am: $(PSS)
uninstall-am:
uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
uninstall-pdf-am uninstall-ps-am
.MAKE: $(am__recursive_targets) all install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
am--refresh check check-am clean clean-cscope clean-generic \
clean-local cscope cscopelist-am ctags ctags-am distclean \
distclean-generic distclean-hdr distclean-local distclean-tags \
dvi dvi-am html html-am info info-am install install-am \
install-data install-data-am install-dvi install-dvi-am \
install-exec install-exec-am install-exec-local install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
maintainer-clean-local mostlyclean mostlyclean-generic \
mostlyclean-local pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am
am--refresh check check-am clean clean-aminfo clean-cscope \
clean-generic clean-local cscope cscopelist-am ctags ctags-am \
dist-info distclean distclean-generic distclean-hdr \
distclean-local distclean-tags dvi dvi-am html html-am info \
info-am install install-am install-data install-data-am \
install-dvi install-dvi-am install-exec install-exec-am \
install-exec-local install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-aminfo maintainer-clean-generic \
maintainer-clean-local mostlyclean mostlyclean-aminfo \
mostlyclean-generic mostlyclean-local pdf pdf-am ps ps-am tags \
tags-am uninstall uninstall-am uninstall-dvi-am \
uninstall-html-am uninstall-info-am uninstall-pdf-am \
uninstall-ps-am
.PRECIOUS: Makefile

22
libgloss/configure vendored
View File

@ -615,6 +615,8 @@ am__include
DEPDIR
CC
subdirs
HAVE_DOC_FALSE
HAVE_DOC_TRUE
AM_BACKSLASH
AM_DEFAULT_VERBOSITY
AM_DEFAULT_V
@ -2630,10 +2632,19 @@ fi
AM_BACKSLASH='\'
if test -z "${with_multisubdir}" ; then
ac_config_files="$ac_config_files doc/Makefile"
if test -z "${with_multisubdir}"; then
have_multisubdir=no
else
have_multisubdir=yes
fi
if test x$have_multisubdir = xno; then
HAVE_DOC_TRUE=
HAVE_DOC_FALSE='#'
else
HAVE_DOC_TRUE='#'
HAVE_DOC_FALSE=
fi
@ -5001,6 +5012,10 @@ else
am__EXEEXT_FALSE=
fi
if test -z "${HAVE_DOC_TRUE}" && test -z "${HAVE_DOC_FALSE}"; then
as_fn_error $? "conditional \"HAVE_DOC\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
as_fn_error $? "conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
@ -5621,7 +5636,6 @@ for ac_config_target in $ac_config_targets
do
case $ac_config_target in
"config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
"doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
"arc/Makefile") CONFIG_FILES="$CONFIG_FILES arc/Makefile" ;;
"epiphany/Makefile") CONFIG_FILES="$CONFIG_FILES epiphany/Makefile" ;;
"m32r/Makefile") CONFIG_FILES="$CONFIG_FILES m32r/Makefile" ;;

View File

@ -14,9 +14,12 @@ AC_CANONICAL_SYSTEM
AM_INIT_AUTOMAKE([foreign no-dist no-define subdir-objects 1.15.1])
AM_SILENT_RULES(yes)
if test -z "${with_multisubdir}" ; then
AC_CONFIG_FILES([doc/Makefile])
if test -z "${with_multisubdir}"; then
have_multisubdir=no
else
have_multisubdir=yes
fi
AM_CONDITIONAL(HAVE_DOC, test x$have_multisubdir = xno)
AC_NO_EXECUTABLES

View File

@ -1,175 +0,0 @@
# Copyright (c) 1995, 1996 Cygnus Support
#
# The authors hereby grant permission to use, copy, modify, distribute,
# and license this software and its documentation for any purpose, provided
# that existing copyright notices are retained in all copies and that this
# notice is included verbatim in any distributions. No written agreement,
# license, or royalty fee is required for any of the authorized uses.
# Modifications to this software may be copyrighted by their authors
# and need not follow the licensing terms described here, provided that
# the new terms are clearly indicated on the first page of each file where
# they apply.
#
DESTDIR =
srcdir = @srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
datarootdir = @datarootdir@
mandir = @mandir@
man1dir = $(mandir)/man1
infodir = @infodir@
htmldir = @htmldir@
pdfdir = @pdfdir@
MAKEINFO = makeinfo
TEXI2DVI = TEXINPUTS=$(TEXIDIR):$(srcdir):$$TEXINPUTS texi2dvi
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
# Where to find texinfo.tex to format docn with TeX
TEXIDIR = $(srcdir)/../../texinfo
MANPAGES =
all:
info: porting.info
html: porting.html
dvi: porting.dvi
pdf: porting.pdf
ps: porting.ps
doc: info dvi
porting: porting.dvi porting.info
######################################################################
# DOCUMENTATION TARGETS
# TeX output
porting.dvi: $(srcdir)/porting.texi $(srcdir)/porting.texi
$(TEXI2DVI) $(srcdir)/porting.texi
porting.pdf: $(srcdir)/porting.texi $(srcdir)/porting.texi
$(TEXI2DVI) --pdf $(srcdir)/porting.texi
# info file for online browsing
porting.info: $(srcdir)/porting.texi $(srcdir)/porting.texi
$(MAKEINFO) -I $(srcdir) -o porting.info $(srcdir)/porting.texi
porting.html: $(srcdir)/porting.texi $(srcdir)/porting.texi
$(MAKEINFO) --html -I $(srcdir) -o porting.html $(srcdir)/porting.texi
porting.ps: porting.dvi
dvips -f porting.dvi > porting.ps
# different targets for -ms, -mm, -me
# Try to use a recent texi2roff. v2 was put on prep in jan91.
# If you want an index, see texi2roff doc for postprocessing
# and add -i to texi2roff invocations below.
# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
# correspondint -e lines when later texi2roff's are current)
# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
# + @c's deleted explicitly because texi2roff sees texinfo commands in them
# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
# + @alphaenumerate is ridiculously new, turned into @enumerate
# roff output (-ms)
porting.ms: $(srcdir)/porting.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c/d' \
-e 's/{.*,,/{/' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/porting.texi | \
$(TEXI2ROFF) -ms | \
sed -e 's/---/\\(em/g' \
>porting.ms
# roff output (-mm)
# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
# try leaving them in
porting.mm: $(srcdir)/porting.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c/d' \
-e 's/{.*,,/{/' \
-e '/@noindent/d' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/porting.texi | \
$(TEXI2ROFF) -mm | \
sed -e 's/---/\\(em/g' \
>porting.mm
# roff output (-me)
porting.me: $(srcdir)/porting.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c/d' \
-e 's/{.*,,/{/' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/porting.texi | \
$(TEXI2ROFF) -me | \
sed -e 's/---/\\(em/g' \
>porting.me
######################################################################
clean mostlyclean:
-rm -f *.o *~ \#* core *.aux *.cp *.dvi *.fn *.ky *.log *.pg *.toc \
*.tp *.vr *.cps *.fns *.kys *.pgs *.tps *.vrs *.info* *.1 *.ps
maintainer-clean realclean: clean
-rm -f
install:
install-info: info
for i in *.info* ; do \
$(INSTALL_DATA) $$i $(DESTDIR)$(infodir)/$$i ; \
done
install-pdf: pdf
for i in *.pdf ; do \
$(INSTALL_DATA) $$i $(DESTDIR)$(pdfdir)/$$i ; \
done
install-html: html
for i in *.html ; do \
if [ -d $$i ]; then \
mkdir -p $(DESTDIR)$(htmldir)/$$i ; \
for j in $$i/*.html ; do \
$(INSTALL_DATA) $$j $(DESTDIR)$(htmldir)/$$j ; \
done \
else \
$(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i ; \
fi ; \
done
clean-info:
-rm -rf *.info*
distclean: clean
-rm -f Makefile
Makefile: Makefile.in ../config.status
cd .. && $(SHELL) config.status

View File

@ -0,0 +1 @@
info_TEXINFOS += %D%/porting.texi