newlib-cygwin/libgloss/arm/Makefile.in

#
#
DESTDIR =
VPATH = @srcdir@ @srcdir@/..
srcdir = @srcdir@
objdir = .
srcroot = $(srcdir)/../..
objroot = $(objdir)/../..

prefix = @prefix@
exec_prefix = @exec_prefix@

host_alias = @host_alias@
target_alias = @target_alias@

bindir = @bindir@
libdir = @libdir@
tooldir = $(exec_prefix)/$(target_alias)

objtype = @objtype@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@

# Multilib support variables.
# TOP is used instead of MULTI{BUILD,SRC}TOP.
MULTISRCTOP =
MULTIBUILDTOP =
MULTIDIRS =
MULTISUBDIR =
MULTILIBNAME =
MULTIDO = true
MULTICLEAN = true
MULTI_FLAGS_FOR_TARGET = MULTI_DEFAULT_FLAGS
MULTI_DEFAULT_FLAGS = -DSEMIHOST_V2

MULTIDIRS += semihv2m
MULTIDIR_semihv2m_FLAGS = $(MULTI_DEFAULT_FLAGS) -DSEMIHOST_V2_MIXED_MODE
MULTIDIR_semihv2m_NAME = -v2m

SHELL =	/bin/sh

mkinstalldirs = $(SHELL) $(srcroot)/mkinstalldirs

CC = @CC@

AS = @AS@
AR = @AR@
LD = @LD@
RANLIB = @RANLIB@

SUBDIRS = @subdirs@

OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \
	then echo ${objroot}/../binutils/objdump ; \
	else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi`
OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \
	then echo ${objroot}/../binutils/objcopy ; \
	else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi`

@BUILD_CRT0_TRUE@CRT0		= crt0.o
@BUILD_CRT0_TRUE@CRT0_INSTALL	= install-crt0
@BUILD_CRT0_FALSE@CRT0		=
@BUILD_CRT0_FALSE@CRT0_INSTALL	=

NANO_SCRIPTS=nano.specs
NANO_INSTALL=install-nano

LINUX_CRT0    = linux-crt0.o
LINUX_BSP     = libgloss-linux.a
LINUX_OBJS    = linux-syscalls0.o linux-syscalls1.o
LINUX_SCRIPTS = linux.specs
LINUX_INSTALL = install-linux

REDBOOT_CRT0	= redboot-crt0.o 
REDBOOT_OBJS	= redboot-syscalls.o
REDBOOT_SCRIPTS	= redboot.ld redboot.specs
REDBOOT_INSTALL	= install-redboot

RDPMON_CRT0	= rdpmon-crt0.o
RDPMON_BSP	= librdpmon.a
RDPMON_OBJS	= ftruncate.o libcfunc.o syscalls.o trap.o truncate.o _exit.o _kill.o
RDPMON_SCRIPTS	= rdpmon.specs
RDPMON_INSTALL	= install-rdpmon

RDIMON_CRT0	= rdimon-crt0${${MULTILIBNAME}}.o
RDIMON_BSP	= librdimon${${MULTILIBNAME}}.a
RDIMON_OBJS	= $(patsubst %,rdimon-%,$(RDPMON_OBJS))
RDIMON_SCRIPTS	= rdimon${${MULTILIBNAME}}.specs \
		  aprofile-validation${${MULTILIBNAME}}.specs \
		  aprofile-ve${${MULTILIBNAME}}.specs
RDIMON_INSTALL	= install-rdimon

CFLAGS		= -g

# Here is all of the eval board stuff
PID_SCRIPTS	= pid.specs
PID_INSTALL	= install-pid

IQ80310_SCRIPTS	= iq80310.specs
IQ80310_INSTALL	= install-iq80310


# Host specific makefile fragment comes in here.
@host_makefile_frag@

INCLUDES += `if [ -d ${objroot}/newlib ]; then echo -I$(srcroot)/newlib/libc/machine/arm; fi`

#
# build a test program for each target board. Just trying to get
# it to link is a good test, so we ignore all the errors for now.
#
all: ${CRT0} ${LINUX_CRT0} ${LINUX_BSP} ${REDBOOT_CRT0} ${REDBOOT_OBJS} ${RDPMON_CRT0} ${RDPMON_BSP} ${RDIMON_CRT0} ${RDIMON_BSP}
	@rootpre=`pwd`/; export rootpre; \
	srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
	for dir in .. ${SUBDIRS}; do \
	  if [ x$$dir != x.. ]; then \
	    if [ -d $$dir ]; then \
	      (cd $$dir; $(MAKE) $(FLAGS_TO_PASS)); \
	    else true; fi; \
	  else true; fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

#
# here's where we build the test programs for each target
#
.PHONY: test
test:

#
crt0.o: crt0.S
redboot-crt0.o: redboot-crt0.S
redboot-syscalls.o: redboot-syscalls.c $(srcdir)/../syscall.h
	$(CC) $(CFLAGS_FOR_TARGET) $($(MULTI_FLAGS_FOR_TARGET)) $(CFLAGS) $(INCLUDES) -o $@ -c $<

rdpmon-crt0.o: crt0.S
	$(CC) $(CFLAGS_FOR_TARGET) $($(MULTI_FLAGS_FOR_TARGET)) $(CFLAGS) $(INCLUDES) -DARM_RDP_MONITOR -o $@ -c $<

rdimon-crt0${${MULTILIBNAME}}.o: crt0.S
	$(CC) $(CFLAGS_FOR_TARGET) $($(MULTI_FLAGS_FOR_TARGET)) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<

rdimon-ftruncate.o: ftruncate.c
	$(CC) $(CFLAGS_FOR_TARGET) $($(MULTI_FLAGS_FOR_TARGET)) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<

rdimon-trap.o: trap.S
	$(CC) $(CFLAGS_FOR_TARGET) $($(MULTI_FLAGS_FOR_TARGET)) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<

rdimon-truncate.o: truncate.c
	$(CC) $(CFLAGS_FOR_TARGET) $($(MULTI_FLAGS_FOR_TARGET)) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<

rdimon-_exit.o: _exit.c
	$(CC) $(CFLAGS_FOR_TARGET) $($(MULTI_FLAGS_FOR_TARGET)) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<

rdimon-_kill.o: _kill.c
	$(CC) $(CFLAGS_FOR_TARGET) $($(MULTI_FLAGS_FOR_TARGET)) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<

rdimon-syscalls.o: syscalls.c
	$(CC) $(CFLAGS_FOR_TARGET) $($(MULTI_FLAGS_FOR_TARGET)) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<

rdimon-libcfunc.o: libcfunc.c
	$(CC) $(CFLAGS_FOR_TARGET) $($(MULTI_FLAGS_FOR_TARGET)) $(CFLAGS) $(INCLUDES) -DARM_RDI_MONITOR -o $@ -c $<

$(LINUX_BSP): $(LINUX_OBJS)
	${AR} ${ARFLAGS} $@ $^
	${RANLIB} $@

$(RDPMON_BSP): $(RDPMON_OBJS)
	${AR} ${ARFLAGS} $@ $^
	${RANLIB} $@

$(RDIMON_BSP): $(RDIMON_OBJS)
	${AR} ${ARFLAGS} $@ $^
	${RANLIB} $@

# Multilib support.
.PHONY:  multi-do all-multi clean-multi install-multi

all-recursive: all-multi
clean-recursive: clean-multi
install-recursive: install-multi

# The $(MAKE) comments below are to enable parallel building.
all-multi:
	$(MAKE) $(AM_MAKEFLAGS) DO=all multi-do

clean-multi:
	$(MAKE) $(AM_MAKEFLAGS) DO=clean multi-do

install-multi:
	$(MAKE) $(AM_MAKEFLAGS) DO=install multi-do

clean mostlyclean:
	rm -f a.out core *.i *.o *-test *.srec *.dis *.x $(SIM_BSP) $(IQ80310_BSP)
	@rootpre=`pwd`/; export rootpre; \
	srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
	for dir in .. ${SUBDIRS}; do \
	  if [ x$$dir != x.. ]; then \
	    if [ -d $$dir ]; then \
	      (cd $$dir; $(MAKE) $(FLAGS_TO_PASS) clean); \
	    else true; fi; \
	  else true; fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) clean-recursive

distclean maintainer-clean realclean: clean
	rm -f Makefile config.status *~

.PHONY: install info install-info clean-info
install: ${CRT0_INSTALL} ${LINUX_INSTALL} ${REDBOOT_INSTALL} ${RDPMON_INSTALL} ${RDIMON_INSTALL} ${IQ80310_INSTALL}  ${PID_INSTALL} ${NANO_INSTALL}
	@rootpre=`pwd`/; export rootpre; \
	srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
	for dir in .. ${SUBDIRS}; do \
	  if [ x$$dir != x.. ]; then \
	    if [ -d $$dir ]; then \
	      (cd $$dir; $(MAKE) $(FLAGS_TO_PASS) install); \
	    else true; fi; \
	  else true; fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) install-recursive

install-nano:
	${mkinstalldirs} ${DESTDIR}${tooldir}/lib${MULTISUBDIR}
	set -e; for x in ${NANO_SCRIPTS}; do ${INSTALL_DATA} ${srcdir}/${objtype}$$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done

install-crt0:
	${mkinstalldirs} ${DESTDIR}${tooldir}/lib${MULTISUBDIR}
	${INSTALL_DATA} ${CRT0} $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x

install-linux:
	${mkinstalldirs} ${DESTDIR}${tooldir}/lib${MULTISUBDIR}
	set -e; for x in ${LINUX_CRT0} ${LINUX_BSP}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
	set -e; for x in ${LINUX_SCRIPTS}; do ${INSTALL_DATA} ${srcdir}/${objtype}$$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done

install-redboot:
	${mkinstalldirs} ${DESTDIR}${tooldir}/lib${MULTISUBDIR}
	set -e; for x in ${REDBOOT_CRT0} ${REDBOOT_OBJS}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
	set -e; for x in ${REDBOOT_SCRIPTS}; do ${INSTALL_DATA} ${srcdir}/${objtype}$$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done

install-rdpmon:
	${mkinstalldirs} ${DESTDIR}${tooldir}/lib${MULTISUBDIR}
	set -e; for x in ${RDPMON_CRT0} ${RDPMON_BSP}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
	set -e; for x in ${RDPMON_SCRIPTS}; do ${INSTALL_DATA} ${srcdir}/${objtype}$$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done

install-rdimon:
	${mkinstalldirs} ${DESTDIR}${tooldir}/lib${MULTISUBDIR}
	set -e; for x in ${RDIMON_CRT0} ${RDIMON_BSP}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
	set -e; for x in ${RDIMON_SCRIPTS}; do ${INSTALL_DATA} ${srcdir}/${objtype}$$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done


install-pid:
	${mkinstalldirs} ${DESTDIR}${tooldir}/lib${MULTISUBDIR}
	set -e; for x in ${PID_SCRIPTS}; do ${INSTALL_DATA} ${srcdir}/${objtype}$$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done

install-iq80310:
	${mkinstalldirs} ${DESTDIR}${tooldir}/lib${MULTISUBDIR}
	set -e; for x in ${IQ80310_SCRIPTS}; do ${INSTALL_DATA} ${srcdir}/${objtype}$$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done


doc:
info:
install-info:
clean-info:

Makefile: Makefile.in config.status @host_makefile_frag_path@
	$(SHELL) config.status

config.status: configure
	$(SHELL) config.status --recheck

include $(srcdir)/../multi-build.in