newlib-cygwin/libgloss/sparc/cache.c

148 lines
3.5 KiB
C
Raw Normal View History

2000-03-18 06:48:54 +08:00
/* Cache code for SPARClite
*
* Copyright (c) 1998 Cygnus Support
*
* The authors hereby grant permission to use, copy, modify, distribute,
* and license this software and its documentation for any purpose, provided
* that existing copyright notices are retained in all copies and that this
* notice is included verbatim in any distributions. No written agreement,
* license, or royalty fee is required for any of the authorized uses.
* Modifications to this software may be copyrighted by their authors
* and need not follow the licensing terms described here, provided that
* the new terms are clearly indicated on the first page of each file where
* they apply.
*/
#include "sparclite.h"
/* Ancillary registers on the DANlite */
#define DIAG 30
#define ICCR 31
/* Bits in the DIAG register */
#define ICD 0x40000000 /* ICACHE disable */
#define DCD 0x20000000 /* DCACHE disable */
/* Bits in the ICCR register */
#define CE 1 /* cache enable*/
/* Forward declarations. */
void flush_i_cache ();
/* Determine if this is a DANlite (MB8686x), as opposed to an earlier
SPARClite (MB8683x). This is done by examining the impl and ver
fields in the PSR:
MB8683x: impl(bit31-28)=0x0; ver(bit27-24)=0xf;
MB8686x: impl(bit31-28)=0x1; ver(bit27-24)=0xe;
*/
static int
is_danlite ()
{
static int checked = 0;
static int danlite = 0;
if (!checked)
{
int psr = read_psr ();
danlite = (psr & 0xff000000) == 0x1e000000;
checked = 1;
}
return danlite;
}
/* This cache code is known to work on both the 930 & 932 processors. It just
cheats and clears the all of the address space that could contain tags, as
opposed to striding the tags at 8 or 16 word intervals, or using the cache
flush registers, which don't exist on all processors. */
void
cache_off ()
{
if (is_danlite ())
{
/* Disable the ICACHE. Disabling the DCACHE crashes the machine. */
unsigned int diag = read_asr (DIAG);
write_asr (DIAG, diag | ICD);
}
else
{
write_asi (1, 0, 0);
}
}
void
cache_on ()
{
if (is_danlite ())
{
unsigned int diag;
/* Flush the caches. */
flush_i_cache ();
/* Enable the ICACHE and DCACHE */
diag = read_asr (DIAG);
write_asr (DIAG, diag & ~ (ICD | DCD));
}
else
{
unsigned long addr;
cache_off (); /* Make sure the cache is off */
/* Reset all of the cache line valid bits */
for (addr = 0; addr < 0x1000; addr += 8)
{
write_asi (0xc, addr, 0); /* Clear bank 1, icache */
write_asi (0xc, addr + 0x80000000, 0); /* Clear bank 2, icache */
write_asi (0xe, addr, 0); /* Clear bank 1, dcache */
write_asi (0xe, addr + 0x80000000, 0); /* Clear bank 2, dcache */
}
/* turn on the cache */
write_asi (1, 0, 0x35); /* Write buf ena, prefetch buf ena, data
& inst caches enab */
}
}
/* Flush the instruction cache. We need to do this for the debugger stub so
that breakpoints, et. al. become visible to the instruction stream after
storing them in memory.
*/
void
flush_i_cache ()
{
if (is_danlite ())
{
write_asi (0x31, 0, 0); /* Flush entire i/d caches */
}
else
{
int cache_reg;
unsigned long addr;
cache_reg = read_asi (1, 0); /* Read cache/bus interface reg */
if (!(cache_reg & 1))
return; /* Just return if cache is already off */
for (addr = 0; addr < 0x1000; addr += 8)
{
write_asi (0xc, addr, 0); /* Clear bank 1, icache */
write_asi (0xc, addr + 0x80000000, 0); /* Clear bank 2, icache */
}
}
}