newlib-cygwin/winsup/doc/faq-setup.xml

608 lines
28 KiB
XML
Raw Normal View History

<!-- faq-setup.xml -->
<qandaentry id="faq.setup.setup">
<question><para>What is the recommended installation procedure?</para></question>
<answer>
<para>There is only one recommended way to install Cygwin, which is to use the GUI
installer ``Cygwin Setup''. It is flexible and easy to use.
You can pick and choose the packages you wish to install, and update
them individually. Full source code is available for all packages and
tools. More information on using Cygwin Setup may be found at
<ulink url="http://cygwin.com/cygwin-ug-net/setup-net.html" />.
</para>
<para>If you do it any other way, you're on your own! That said, keep in mind
that the GUI installer is a "work in progress", so there might be a few
difficulties, especially if you are behind a firewall or have other
specific requirements. If something doesn't work right for you, and
it's not covered here or in the latest development snapshot at
<ulink url="http://cygwin.com/snapshots/">http://cygwin.com/snapshots/</ulink>, then by all means report it to the
mailing list.
</para>
<para>For a searchable list of packages that can be installed with Cygwin,
see <ulink url="http://cygwin.com/packages/">http://cygwin.com/packages/</ulink>.
</para>
</answer></qandaentry>
2006-06-02 12:36:48 +08:00
<qandaentry id="faq.setup.automated">
<question><para>What about an automated Cygwin installation?</para></question>
<answer>
<para>The Cygwin Setup program is designed to be interactive, but there are
a few different ways to automate it. If you are deploying to multiple systems,
the best way is to run through a full installation once, saving the entire
downloaded package tree. Then, on target systems, run setup.exe as a "Local
Install" pointed at your downloaded package tree. You could do this
non-interactively with the command line options
<literal>setup.exe -q -L -l x:\cygwin-local\</literal>, where your downloaded
package tree is in <literal>x:\cygwin-local\</literal> (see the next FAQ for
an explanation of those options.)
</para>
<para>
For other options, search the mailing lists with terms such as
<ulink url="http://www.google.com/search?q=cygwin+automated+setup">cygwin automated setup</ulink> or
<ulink url="http://www.google.com/search?q=automated+cygwin+install">automated cygwin install</ulink>.
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.cli">
<question><para>Does setup.exe accept command-line arguments?</para></question>
<answer>
<para>Yes, the full listing is written to the <literal>setup.log</literal> file
when you run <literal>setup.exe --help</literal>. The current options are:
<screen>
Command Line Options:
-A --disable-buggy-antivirus Disable known or suspected buggy anti
virus software packages during execution.
-C --categories Specify entire categories to install
2006-06-02 12:36:48 +08:00
-D --download Download from internet
-d --no-desktop Disable creation of desktop shortcut
2006-06-02 12:36:48 +08:00
-h --help print help
-K --pubkey URL of extra public key file (gpg format)
-L --local-install Install from local directory
2006-06-02 12:36:48 +08:00
-l --local-package-dir Local package directory
-n --no-shortcuts Disable creation of desktop and start menu
shortcuts
2006-06-02 12:36:48 +08:00
-N --no-startmenu Disable creation of start menu shortcut
-O --only-site Ignore all sites except for -s
-P --packages Specify packages to install
-p --proxy HTTP/FTP proxy (host:port)
-q --quiet-mode Unattended setup mode
-r --no-replaceonreboot Disable replacing in-use files on next
reboot.
-R --root Root installation directory
-S --sexpr-pubkey Extra public key in s-expr format
-s --site Download site
-U --keep-untrusted-keys Use untrusted keys and retain all
-u --untrusted-keys Use untrusted keys from last-extrakeys
-X --no-verify Don't verify setup.ini signatures
2006-06-02 12:36:48 +08:00
</screen>
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.c">
<question><para>Why not install in C:\?</para></question>
<answer>
<para>The Cygwin Setup program will prompt you for a "root" directory.
The default is <literal>C:\cygwin</literal>, but you can change it. You are urged not to
choose something like <literal>C:\</literal> (the root directory on the system drive) for
your Cygwin root. If you do, then critical Cygwin system directories
like <literal>etc</literal>, <literal>lib</literal> and <literal>bin</literal> could easily be corrupted by
other (non-Cygwin) applications or packages that use <literal>\etc</literal>,
<literal>\lib</literal> or <literal>\bin</literal>. Perhaps there is no conflict now, but who
knows what you might install in the future? It's also just good common
sense to segregate your Cygwin "filesystems" from the rest of your
Windows system disk.
</para>
<para>(In the past, there had been genuine bugs that would cause problems
for people who installed in <literal>C:\</literal>, but we believe those are gone
now.)
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.old-versions">
<question><para>Can I use Cygwin Setup to get old versions of packages (like gcc-2.95)?</para></question>
<answer>
<para>Cygwin Setup can be used to install any packages that are on a
Cygwin mirror, which usually includes one version previous to the
current one. The complete list may be searched at
<ulink url="http://cygwin.com/packages/">http://cygwin.com/packages/</ulink>. There is no complete archive of
older packages. If you have a problem with the current version of
a Cygwin package, please report it to the mailing list using the
guidelines at <ulink url="http://cygwin.com/problems.html">http://cygwin.com/problems.html</ulink>.
</para>
<para>That said, if you really need an older package, you may be able to find
an outdated or archival mirror by searching the web for an old package
version (for example, <literal>gcc2-2.95.3-10-src.tar.bz2</literal>), but keep in
mind that this older version will not be supported by the mailing list
and that installing the older version will not help improve Cygwin.
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.upgrade-mountpoints">
<question><para>After upgrading from Cygwin 1.5 to Cygwin 1.7 my user mount points disappeared! How can I get them back?</para></question>
<answer>
<para>
When you upgrade an existing older Cygwin installation to Cygwin 1.7, your old
system mount points (stored in the HKEY_LOCAL_MACHINE branch of your registry)
are read by a script and the /etc/fstab file is generated from these entries.
No such automatism exists for the user mount points formerly stored in the
HKEY_CURRENT_USER branch of the registry. There's a bash script for your
convenience, which creates a user-specific /etc/fstab/${USER} file for you,
called /bin/copy-user-registry-fstab. For more information on the new fstab
files see the User's Guide at
<ulink url="http://cygwin.com/cygwin-ug-net/using.html#mount-table">http://cygwin.com/cygwin-ug-net/using.html#mount-table</ulink>
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.virus">
<question><para>Is Cygwin Setup, or one of the packages, infected with a virus?</para></question>
<answer>
<para>Unlikely. Unless you can confirm it, please don't report it to the
mailing list. Anti-virus products have been known to detect false
positives when extracting compressed tar archives. If this causes
problems for you, consider disabling your anti-virus software when
running <literal>setup</literal>. Read the next entry for a fairly safe way to do
this.
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.hang">
<question><para>My computer hangs when I run Cygwin Setup!</para></question>
<answer>
<para>Both Network Associates (formerly McAfee) and Norton anti-virus
products have been reported to "hang" when extracting Cygwin tar
archives. If this happens to you, consider disabling your anti-virus
software when running Cygwin Setup. The following procedure should be
a fairly safe way to do that:
</para>
<orderedlist><listitem><para>Download <literal>setup.exe</literal> and scan it explicitly.
</para>
</listitem>
<listitem><para>Turn off the anti-virus software.
</para>
</listitem>
<listitem><para>Run setup to download and extract all the tar files.
</para>
</listitem>
<listitem><para>Re-activate your anti-virus software and scan everything
in C:\cygwin (or wherever you chose to install), or your entire hard
disk if you are paranoid.
</para>
</listitem>
</orderedlist>
<para>This should be safe, but only if Cygwin Setup is not substituted by
something malicious, and no mirror has been compromised.
</para>
<para>See also <ulink url="http://cygwin.com/faq/faq.using.html#faq.using.bloda" />
for a list of applications that have been known, at one time or another, to
interfere with the normal functioning of Cygwin.
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.what-packages">
<question><para>What packages should I download? Where are 'make', 'gcc', 'vi', etc? </para></question>
<answer>
<para>When using Cygwin Setup for the first time, the default is to install
2006-02-02 12:45:25 +08:00
a minimal subset of all available packages. If you want anything beyond that,
you will have to select it explicitly. See
<ulink url="http://cygwin.com/packages/" /> for a searchable list of available
packages, or use <literal>cygcheck -p </literal> as described in the Cygwin
User's Guide at
<ulink url="http://cygwin.com/cygwin-ug-net/using-utils.html#cygcheck" />.
</para>
<para>If you want to build programs, of course you'll need <literal>gcc</literal>,
<literal>binutils</literal>, <literal>make</literal> and probably other packages from the
``Devel'' category. Text editors can be found under ``Editors''.
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.everything">
<question><para>How do I just get everything?</para></question>
<answer>
<para>Long ago, the default was to install everything, much to the
irritation of most users. Now the default is to install only a basic
core of packages. Cygwin Setup is designed to make it easy to browse
categories and select what you want to install or omit from those
categories. It's also easy to install everything:
</para>
<orderedlist>
<listitem><para>At the ``Select Packages'' screen, in ``Categories'' view, at the line
marked ``All'', click on the word ``default'' so that it changes to
``install''. (Be patient, there is some computing to do at this step.
It may take a second or two to register the change.) This tells Setup
to install <emphasis>everything</emphasis>, not just what it thinks you should have
by default.
</para>
</listitem>
<listitem><para>Now click on the ``View'' button (twice) until you get to the
``Pending'' view. This shows exactly which packages are about to be
downloaded and installed.
</para>
</listitem>
</orderedlist>
<para>This procedure only works for packages that are currently available.
There is no way to tell Cygwin Setup to install all packages by
default from now on. As new packages become available that would not
be installed by default, you have to repeat the above procedure to get
them.
</para>
<para>In general, a better method (in my opinion), is to:
</para>
<orderedlist>
<listitem><para>First download &amp; install all packages that would normally be
installed by default. This includes fundamental packages and any
updates to what you have already installed. Then...
</para>
</listitem>
<listitem><para>Run Cygwin Setup again, and apply the above technique to get all
new packages that would not be installed by default. You can check
the list in the ``Pending'' view before proceeding, in case there's
something you really <emphasis>don't</emphasis> want.
</para>
</listitem>
<listitem><para>In the latest version of Cygwin Setup, if you click the ``View''
button (twice) more, it shows packages not currently installed. You
ought to check whether you <emphasis>really</emphasis> want to install everything!
</para>
</listitem>
</orderedlist>
</answer></qandaentry>
<qandaentry id="faq.setup.disk-space">
<question><para>How much disk space does Cygwin require?</para></question>
<answer>
<para>That depends, obviously, on what you've chosen to download and
install. A full installation today is probably larger than 1 GB
installed, not including the package archives themselves nor the source
code.
</para>
<para>After installation, the package archives remain in your ``Local
Package Directory'', by default the location of <literal>setup.exe</literal>. You
may conserve disk space by deleting the subdirectories there. These
directories will have very weird looking names, being encoded with
their URLs (named <literal>ftp%3a%2f...</literal>).
</para>
<para>Of course, you can keep them around in case you want to reinstall a
package. If you want to clean out only the outdated packages, Michael Chase
has written a script called <literal>clean_setup.pl</literal>, available
at <ulink url="ftp://cygwin.com/pub/cygwin/unsupported/clean_setup.pl" />.
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.what-upgraded">
<question><para>How do I know which version I upgraded from?</para></question>
<answer>
<para>Detailed logs of the most recent Cygwin Setup session can be found in
<literal>/var/log/setup.log.full</literal> and less verbose information about
prior actions is in <literal>/var/log/setup.log</literal>.
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.setup-fails">
<question><para>What if setup fails?</para></question>
<answer>
<para>First, make sure that you are using the latest version of Cygwin Setup.
The latest version is always available from the 'Install Cygwin now' link on
the Cygwin Home Page at <ulink
url="http://cygwin.com/">http://cygwin.com/</ulink>. </para>
<para>If you are downloading from the Internet, setup will fail if it cannot
download the list of mirrors at <ulink
url="http://cygwin.com/mirrors.html">http://cygwin.com/mirrors.html</ulink>.
It could be that the network is too busy. Something similar could be the
cause of a download site not working. Try another mirror, or try again
later.
</para>
<para>If setup refuses to download a package that you know needs to be
upgraded, try deleting that package's entry from /etc/setup. If you are
reacting quickly to an announcement on the mailing list, it could be
that the mirror you are using doesn't have the latest copy yet. Try
another mirror, or try again tomorrow.
</para>
<para>If setup has otherwise behaved strangely, check the files
<literal>setup.log</literal> and <literal>setup.log.full</literal> in
<literal>/var/log</literal> (<literal>C:\cygwin\var\log</literal> by
default). It may provide some clues as to what went wrong and why.
</para>
<para>If you're still baffled, search the Cygwin mailing list for clues.
Others may have the same problem, and a solution may be posted there.
If that search proves fruitless, send a query to the Cygwin mailing
list. You must provide complete details in your query: version of
setup, options you selected, contents of setup.log and setup.log.full,
what happened that wasn't supposed to happen, etc.
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.setup-fails-on-ts">
<question><para>My installation on a Terminal Server machine goes wrong. What can I do?</para></question>
<answer>
<para>The problem is that Terminal Server machines do some compatibility
checks when running applications which are not marked as
"Terminal Server-aware", and this compatibility check seems to be buggy,
leaving parts of the application in a non-executable state. Curious enough,
this only happens if DEP (Data Execution Prevention) is turned on for
all applications.</para>
<para>So far, only few Cygwin packages have their binaries marked as
TS-aware, which means there's a good chance that the postinstall scripts
during the installation will break, and that after installation you
can't start a shell, etc.</para>
<para>So, for the time being, here's how you install Cygwin on a Terminal
Server. First, switch DEP to "Turn on DEP for essential Windows programs
and services only" and reboot the machine. Then install via setup.exe.
You can leave it at that and run the Terminal Server in the aforementioned
DEP setting. Or use the peflags tool from the rebase package to set
the TS-aware flag in all executables, switch DEP back to "Turn on DEP for
all programs and services except [...]" and reboot again. However,
please keep in mind that a package update might re-install a binary
with the TS-aware flag switched off again. So you will have to re-use
the peflags utility once in a while.
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.name-with-space">
<question><para>My Windows logon name has a space in it, will this cause problems?</para></question>
<answer>
<para>Most definitely yes! UNIX shells (and thus Cygwin) use the space
character as a word delimiter. Under certain circumstances, it is
possible to get around this with various shell quoting mechanisms, but
you are much better off if you can avoid the problem entirely.
</para>
<para>You have two choices:
</para><orderedlist>
<listitem><para>You can rename the user in the Windows User Manager GUI and then
run mkpasswd.
</para>
</listitem>
<listitem><para>You can simply edit the /etc/passwd file and change the Cygwin user name
(first field). It's also a good idea to avoid spaces in the home directory.
</para>
</listitem>
</orderedlist>
</answer></qandaentry>
<qandaentry id="faq.setup.home">
<question><para>My <literal>HOME</literal> environment variable is not what I want.</para></question>
<answer>
<para>When starting Cygwin from Windows, <literal>HOME</literal> is determined as follows
in order of decreasing priority:
</para>
<orderedlist>
<listitem><para><literal>HOME</literal> from the Windows environment, translated to POSIX form.
</para>
</listitem>
<listitem><para>The entry in /etc/passwd
</para>
</listitem>
<listitem><para>/home/USERNAME
</para>
</listitem>
</orderedlist>
<para>When using Cygwin from the network (telnet, ssh,...), <literal>HOME</literal> is set
from /etc/passwd.
</para>
<para>If your <literal>HOME</literal> is set to a value such as /cygdrive/c, it is likely
that it was set in Windows. Start a DOS Command Window and type
"set HOME" to verify if this is the case.
</para>
<para>Access to shared drives is often restricted when starting from the network,
thus Domain users may wish to have a different <literal>HOME</literal> in the
Windows environment (on shared drive) than in /etc/passwd (on local drive).
Note that ssh only considers /etc/passwd, disregarding <literal>HOME</literal>.
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.uninstall-packages">
<question><para>How do I uninstall individual packages?</para></question>
<answer>
<para>Run Cygwin Setup as you would to install packages. In the list of
packages to install, browse the relevant category or click on the
``View'' button to get a full listing. Click on the cycle glyph until
the action reads ``Uninstall''. Proceed by clicking ``Next''.
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.uninstall-service">
<question><para>How do I uninstall a Cygwin service?</para></question>
<answer>
<orderedlist>
<listitem><para>List all services you have installed with
<literal>cygrunsrv -L</literal>. If you do not have
<literal>cygrunsrv</literal> installed, skip this FAQ.
</para></listitem>
<listitem><para>Before removing the service, you should stop it with
<literal>cygrunsrv --stop <replaceable>service_name</replaceable></literal>.
If you have <literal>inetd</literal> configured to run as a standalone
service, it will not show up in the list, but
<literal>cygrunsrv --stop inetd</literal> will work to stop it as
well.
</para></listitem>
<listitem><para>Lastly, remove the service with
<literal>cygrunsrv --remove <replaceable>service_name</replaceable></literal>.
</para></listitem>
</orderedlist>
</answer></qandaentry>
<qandaentry id="faq.setup.uninstall-all">
<question><para>How do I uninstall <emphasis role='bold'>all</emphasis> of Cygwin?</para></question>
<answer>
<para>Setup has no automatic uninstall facility. The recommended method to remove all
of Cygwin is as follows:
</para>
<orderedlist>
<listitem><para>If you have any Cygwin services running, remove by repeating
the instructions in <ulink
url="http://cygwin.com/faq/faq.setup.html#faq.setup.uninstall-service" /> for
all services that you installed. Common services that might have been
installed are <literal>sshd</literal>, <literal>cron</literal>,
<literal>cygserver</literal>, <literal>inetd</literal>, <literal>apache</literal>,
<literal>postgresql</literal>, and so on.
</para>
</listitem>
<listitem><para>Stop the X11 server if it is running, and terminate any Cygwin programs
that might be running in the background. Exit the command prompt and ensure
that no Cygwin processes remain. Note: If you want to save your mount points for a later
reinstall, first save the output of <literal>mount -m</literal> as described at
<ulink url="http://cygwin.com/cygwin-ug-net/using-utils.html#mount" />.
</para>
</listitem>
<listitem><para>Delete the Cygwin root folder and all subfolders. If you get an error
that an object is in use, then ensure that you've stopped all services and
closed all Cygwin programs. If you get a 'Permission Denied' error then you
will need to modify the permissions and/or ownership of the files or folders
that are causing the error. For example, sometimes files used by system
services end up owned by the SYSTEM account and not writable by regular users.
</para>
<para>The quickest way to delete the entire tree if you run into this problem is to
change the ownership of all files and folders to your account. To do this in
Windows Explorer, right click on the root Cygwin folder, choose Properties, then
the Security tab. If you are using Windows XP Home or Simple File Sharing,
you will need to boot into Safe Mode to access the Security tab. Select
Advanced, then go to the Owner tab and make sure your account is listed as
the owner. Select the 'Replace owner on subcontainers and objects' checkbox
and press Ok. After Explorer applies the changes you should be able to
delete the entire tree in one operation. Note that you can also achieve
this in Cygwin by typing <literal>chown -R user /</literal> or by using other
tools such as <literal>CACLS.EXE</literal>.
</para>
</listitem>
<listitem><para>Delete the Cygwin shortcuts on the Desktop and Start Menu, and anything
left by setup.exe in the download directory. However, if you plan to reinstall
Cygwin it's a good idea to keep your setup.exe download directory since you can
reinstall the packages left in its cache without redownloading them.
</para>
</listitem>
<listitem><para>If you added Cygwin to your system path, you should remove it unless you
plan to reinstall Cygwin to the same location. Similarly, if you set your
CYGWIN environment variable system-wide and don't plan to reinstall, you should
remove it.
</para>
</listitem>
<listitem><para>Finally, if you want to be thorough you can delete the registry tree
<literal>Software\Cygwin</literal> under <literal>HKEY_LOCAL_MACHINE</literal> and/or
<literal>HKEY_CURRENT_USER</literal>. However, if you followed the directions above you
will have already removed everything important. Typically only the installation
directory has been stored in the registry at all.
</para>
</listitem>
</orderedlist>
</answer></qandaentry>
<qandaentry id="faq.setup.snapshots">
<question><para>How do I install snapshots?</para></question>
<answer>
<para>First, are you sure you want to do this? Snapshots are risky. They
have not been tested. Use them <emphasis role='bold'>only</emphasis> if there is a feature or
bugfix that you need to try, and you are willing to deal with any
problems, or at the request of a Cygwin developer.
</para>
<para>You should generally install the full
<literal>cygwin-inst-YYYYMMDD.tar.bz2</literal> update, rather than just the DLL,
otherwise some components may be out of sync.
</para>
<para>You cannot use Cygwin Setup to install a snapshot.
</para>
<para>First, you will need to download the snapshot from the snapshots
page at <ulink url="http://cygwin.com/snapshots/">http://cygwin.com/snapshots/</ulink>. Note the directory where
you saved the snapshot tarball.
</para>
<para>Before installing a snapshot, you must first Close <emphasis role='bold'>all</emphasis> Cygwin
applications, including shells and services (e.g., <literal>inetd</literal>, <literal>sshd</literal>).
You will not be able to replace <literal>cygwin1.dll</literal> if any Cygwin process is
running. You may have to restart Windows to clear the DLL from memory
(beware of automatic service startup).
</para>
<para>Most of the downloaded snapshot can be installed using <literal>tar</literal>. Cygwin
<literal>tar</literal> won't be able to update <literal>/usr/bin/cygwin1.dll</literal> (because it's
used by <literal>tar</literal> itself), but it should succeed with everything else. If
you are only installing the DLL snapshot, skip the first tar command. Open
a <literal>bash</literal> shell (it should be the only running Cygwin process) and issue
the following commands:
<screen>
/bin/tar -C/ -jxvf /posix/path/to/cygwin-inst-YYYYMMDD.tar.bz2 --exclude=usr/bin/cygwin1.dll
/bin/tar -C/tmp -jxvf /posix/path/to/cygwin-inst-YYYYMMDD.tar.bz2 usr/bin/cygwin1.dll
</screen>
</para>
<para>Exit the bash shell, and use Explorer or the Windows command shell to
first rename <literal>C:\cygwin\bin\cygwin1.dll</literal> to
<literal>C:\cygwin\bin\cygwin1-prev.dll</literal> and then move
<literal>C:\cygwin\tmp\usr\bin\cygwin1.dll</literal>
to <literal>C:\cygwin\bin\cygwin1.dll</literal> (assuming you installed Cygwin in
<literal>C:\cygwin</literal>).
</para>
<para>The operative word in trying the snapshots is "<emphasis>trying</emphasis>". If you
notice a problem with the snapshot that was not present in the release
DLL (what we call a "regression"), please report it to the Cygwin
mailing list (see <ulink url="http://cygwin.com/problems.html">http://cygwin.com/problems.html</ulink> for problem
reporting guidelines). If you wish to go back to the older version of the
DLL, again, close all Cygwin processes, delete
<literal>C:\cygwin\bin\cygwin1.dll</literal>, and
rename <literal>C:\cygwin\bin\cygwin1-prev.dll</literal> back to
<literal>C:\cygwin\bin\cygwin1.dll</literal> (again assuming that your "<literal>/</literal>" is
<literal>C:\cygwin</literal>). To restore the rest of the snapshot
files, reinstall the "<literal>cygwin</literal>" package using Setup.
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.mirror">
<question><para>Can Cygwin Setup maintain a ``mirror''?</para></question>
<answer>
<para>NO. Cygwin Setup cannot do this for you. Use a tool designed for
this purpose. See <ulink url="http://rsync.samba.org/">http://rsync.samba.org/</ulink>,
<ulink url="http://www.gnu.org/software/wget/">http://www.gnu.org/software/wget/</ulink> for utilities that can do this for you.
For more information on setting up a custom Cygwin package server, see
the Cygwin Setup homepage at
<ulink url="http://sourceware.org/cygwin-apps/setup.html">http://sourceware.org/cygwin-apps/setup.html</ulink>.
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.cd">
<question><para>How can I make my own portable Cygwin on CD?</para></question>
<answer>
<para>While some users have successfully done this, for example Indiana
University's XLiveCD <ulink url="http://xlivecd.indiana.edu/">http://xlivecd.indiana.edu/</ulink>, there is no
easy way to do it. Full instructions for constructing a portable Cygwin
on CD by hand can be found on the mailing list at
<ulink url="http://www.cygwin.com/ml/cygwin/2003-07/msg01117.html">http://www.cygwin.com/ml/cygwin/2003-07/msg01117.html</ulink>
(Thanks to fergus at bonhard dot uklinux dot net for these instructions.)
Please note that these instructions are rather old and are referring to the
somewhat different setup of a Cygwin 1.5.x release. As soon as somebody set
this up for Cygwin 1.7, we might add this information here.
</para>
</answer></qandaentry>
<qandaentry id="faq.setup.registry">
<question><para>How do I save, restore, delete, or modify the Cygwin information stored in the registry?</para></question>
<answer>
<para>Since Cygwin 1.7, there's nothing important in the registry anymore,
except for the installation directory information stored there for the sake
of setup.exe. There's nothing left to manipulate anymore.
</para></answer></qandaentry>