2000-02-18 03:38:33 +08:00
dnl Autoconf configure script for Cygwin.
dnl
dnl This file is part of Cygwin.
dnl
dnl This software is a copyrighted work licensed under the terms of the
dnl Cygwin license. Please consult the file "CYGWIN_LICENSE" for
dnl details.
dnl
dnl Process this file with autoconf to produce a configure script.
2016-03-23 21:34:10 +08:00
AC_PREREQ([2.59])
Cygwin: Remove recursive configure
There's doesn't seem to be much use in independently distributing these
subdirectories, so allowing them to be independently configured seems
pointless and overcomplicated.
The order in which the subdirectories are built is still a little odd,
as cygwin is linked with libcygserver, and cygserver is then linked with
cygwin. So, we build the cygwin directory first, which invokes a build
of libcygserver in the cygserver directory, and then build in the
cygserver directory to build the cygserver executable.
Drop AC_CONFIGURE_ARGS, since we don't need to recursively call
configure with the same arguments anymore.
Slightly refine when we build utils: Previously we didn't build any
utils if MinGW compiler use was avoided, now we just avoid building
those utils which require that compiler.
Greatly simplify how winsup_srcdir and target_builddir are set, since
we're only configuring from one directory. (These are still kept
absolute, since we don't adjust them where used for being used in a
subdirectory).
Remove configure.cygwin and put it's (greatly reduced) contents inline
in the one place it's used now.
Remove generated configure and aclocal.m4 in subdirectories.
2020-10-06 23:22:02 +08:00
AC_INIT([Cygwin],[0],[cygwin@cygwin.com],[cygwin],[https://cygwin.com])
2014-11-13 20:12:56 +08:00
AC_CONFIG_SRCDIR(Makefile.in)
2012-11-23 21:22:47 +08:00
AC_CONFIG_AUX_DIR(..)
2000-02-18 03:38:33 +08:00
Cygwin: Remove recursive configure
There's doesn't seem to be much use in independently distributing these
subdirectories, so allowing them to be independently configured seems
pointless and overcomplicated.
The order in which the subdirectories are built is still a little odd,
as cygwin is linked with libcygserver, and cygserver is then linked with
cygwin. So, we build the cygwin directory first, which invokes a build
of libcygserver in the cygserver directory, and then build in the
cygserver directory to build the cygserver executable.
Drop AC_CONFIGURE_ARGS, since we don't need to recursively call
configure with the same arguments anymore.
Slightly refine when we build utils: Previously we didn't build any
utils if MinGW compiler use was avoided, now we just avoid building
those utils which require that compiler.
Greatly simplify how winsup_srcdir and target_builddir are set, since
we're only configuring from one directory. (These are still kept
absolute, since we don't adjust them where used for being used in a
subdirectory).
Remove configure.cygwin and put it's (greatly reduced) contents inline
in the one place it's used now.
Remove generated configure and aclocal.m4 in subdirectories.
2020-10-06 23:22:02 +08:00
realdirpath() {
test -z "$1" && return 1
(cd "$1" 2>/dev/null && pwd)
if test $? -ne 0; then
return 1
else
return 0
fi
}
winsup_srcdir="$(realdirpath $srcdir)"
target_builddir="$(realdirpath ..)"
2012-11-23 21:22:47 +08:00
2006-01-17 01:48:36 +08:00
AC_PROG_INSTALL
2012-11-23 21:22:47 +08:00
AC_NO_EXECUTABLES
2016-03-23 21:34:10 +08:00
AC_CANONICAL_TARGET
2000-02-18 03:38:33 +08:00
2012-11-23 21:22:47 +08:00
AC_PROG_CC
AC_PROG_CXX
AC_PROG_CPP
AC_LANG(C)
AC_LANG(C++)
2006-05-25 00:59:03 +08:00
Cygwin: Remove recursive configure
There's doesn't seem to be much use in independently distributing these
subdirectories, so allowing them to be independently configured seems
pointless and overcomplicated.
The order in which the subdirectories are built is still a little odd,
as cygwin is linked with libcygserver, and cygserver is then linked with
cygwin. So, we build the cygwin directory first, which invokes a build
of libcygserver in the cygserver directory, and then build in the
cygserver directory to build the cygserver executable.
Drop AC_CONFIGURE_ARGS, since we don't need to recursively call
configure with the same arguments anymore.
Slightly refine when we build utils: Previously we didn't build any
utils if MinGW compiler use was avoided, now we just avoid building
those utils which require that compiler.
Greatly simplify how winsup_srcdir and target_builddir are set, since
we're only configuring from one directory. (These are still kept
absolute, since we don't adjust them where used for being used in a
subdirectory).
Remove configure.cygwin and put it's (greatly reduced) contents inline
in the one place it's used now.
Remove generated configure and aclocal.m4 in subdirectories.
2020-10-06 23:22:02 +08:00
AC_ARG_WITH([cross-bootstrap],[AS_HELP_STRING([--with-cross-bootstrap],[do not build programs using the MinGW toolchain or check for MinGW libraries (useful for bootstrapping a cross-compiler)])],[],[with_cross_bootstrap=no])
2012-11-23 21:22:47 +08:00
AC_CYGWIN_INCLUDES
2006-08-30 21:05:46 +08:00
Cygwin: Remove recursive configure
There's doesn't seem to be much use in independently distributing these
subdirectories, so allowing them to be independently configured seems
pointless and overcomplicated.
The order in which the subdirectories are built is still a little odd,
as cygwin is linked with libcygserver, and cygserver is then linked with
cygwin. So, we build the cygwin directory first, which invokes a build
of libcygserver in the cygserver directory, and then build in the
cygserver directory to build the cygserver executable.
Drop AC_CONFIGURE_ARGS, since we don't need to recursively call
configure with the same arguments anymore.
Slightly refine when we build utils: Previously we didn't build any
utils if MinGW compiler use was avoided, now we just avoid building
those utils which require that compiler.
Greatly simplify how winsup_srcdir and target_builddir are set, since
we're only configuring from one directory. (These are still kept
absolute, since we don't adjust them where used for being used in a
subdirectory).
Remove configure.cygwin and put it's (greatly reduced) contents inline
in the one place it's used now.
Remove generated configure and aclocal.m4 in subdirectories.
2020-10-06 23:22:02 +08:00
AC_CONFIG_HEADER(cygwin/config.h)
AC_CHECK_TOOL(AR, ar, ar)
AC_CHECK_TOOL(AS, as, as)
AC_CHECK_TOOL(DLLTOOL, dlltool, dlltool)
AC_CHECK_TOOL(LD, ld, ld)
AC_CHECK_TOOL(NM, nm, nm)
AC_CHECK_TOOL(OBJCOPY, objcopy, objcopy)
AC_CHECK_TOOL(OBJDUMP, objdump, objdump)
AC_CHECK_TOOL(RANLIB, ranlib, ranlib)
AC_CHECK_TOOL(STRIP, strip, strip)
AC_CHECK_TOOL(WINDRES, windres, windres)
AC_ARG_ENABLE(debugging,
[ --enable-debugging Build a cygwin DLL which has more consistency checking for debugging],
[case "${enableval}" in
yes) AC_DEFINE([DEBUGGING],[1],[Define if DEBUGGING support is requested.]) ;;
no) ;;
esac
])
case "$target_cpu" in
i?86)
DLL_ENTRY="_dll_entry@12"
DEF_DLL_ENTRY="dll_entry@12"
DIN_FILE="i686.din"
TLSOFFSETS_H="tlsoffsets.h"
;;
x86_64)
DLL_ENTRY="dll_entry"
DEF_DLL_ENTRY="dll_entry"
DIN_FILE="x86_64.din"
TLSOFFSETS_H="tlsoffsets64.h"
;;
*) AC_MSG_ERROR([Invalid target processor "$target_cpu"]) ;;
esac
AC_SUBST(DLL_ENTRY)
AC_SUBST(DEF_DLL_ENTRY)
AC_SUBST(DIN_FILE)
AC_SUBST(TLSOFFSETS_H)
AC_CHECK_PROGS([DOCBOOK2XTEXI], [docbook2x-texi db2x_docbook2texi], [true])
2016-04-02 22:56:44 +08:00
if test "x$with_cross_bootstrap" != "xyes"; then
Cygwin: Remove recursive configure
There's doesn't seem to be much use in independently distributing these
subdirectories, so allowing them to be independently configured seems
pointless and overcomplicated.
The order in which the subdirectories are built is still a little odd,
as cygwin is linked with libcygserver, and cygserver is then linked with
cygwin. So, we build the cygwin directory first, which invokes a build
of libcygserver in the cygserver directory, and then build in the
cygserver directory to build the cygserver executable.
Drop AC_CONFIGURE_ARGS, since we don't need to recursively call
configure with the same arguments anymore.
Slightly refine when we build utils: Previously we didn't build any
utils if MinGW compiler use was avoided, now we just avoid building
those utils which require that compiler.
Greatly simplify how winsup_srcdir and target_builddir are set, since
we're only configuring from one directory. (These are still kept
absolute, since we don't adjust them where used for being used in a
subdirectory).
Remove configure.cygwin and put it's (greatly reduced) contents inline
in the one place it's used now.
Remove generated configure and aclocal.m4 in subdirectories.
2020-10-06 23:22:02 +08:00
AC_CHECK_PROGS(MINGW_CXX, ${target_cpu}-w64-mingw32-g++)
test -n "$MINGW_CXX" || AC_MSG_ERROR([no acceptable MinGW g++ found in \$PATH])
AC_CHECK_PROGS(MINGW_CC, ${target_cpu}-w64-mingw32-gcc)
test -n "$MINGW_CC" || AC_MSG_ERROR([no acceptable MinGW gcc found in \$PATH])
2016-03-23 21:34:10 +08:00
fi
Cygwin: Remove recursive configure
There's doesn't seem to be much use in independently distributing these
subdirectories, so allowing them to be independently configured seems
pointless and overcomplicated.
The order in which the subdirectories are built is still a little odd,
as cygwin is linked with libcygserver, and cygserver is then linked with
cygwin. So, we build the cygwin directory first, which invokes a build
of libcygserver in the cygserver directory, and then build in the
cygserver directory to build the cygserver executable.
Drop AC_CONFIGURE_ARGS, since we don't need to recursively call
configure with the same arguments anymore.
Slightly refine when we build utils: Previously we didn't build any
utils if MinGW compiler use was avoided, now we just avoid building
those utils which require that compiler.
Greatly simplify how winsup_srcdir and target_builddir are set, since
we're only configuring from one directory. (These are still kept
absolute, since we don't adjust them where used for being used in a
subdirectory).
Remove configure.cygwin and put it's (greatly reduced) contents inline
in the one place it's used now.
Remove generated configure and aclocal.m4 in subdirectories.
2020-10-06 23:22:02 +08:00
AC_EXEEXT
AC_CONFIG_FILES([
Makefile
cygwin/Makefile
cygserver/Makefile
doc/Makefile
utils/Makefile
testsuite/Makefile
])
2016-03-23 21:34:10 +08:00
AC_OUTPUT
