newlib-cygwin/libgloss/bfin/include/defBF51x_base.h

/*
 * The authors hereby grant permission to use, copy, modify, distribute,
 * and license this software and its documentation for any purpose, provided
 * that existing copyright notices are retained in all copies and that this
 * notice is included verbatim in any distributions. No written agreement,
 * license, or royalty fee is required for any of the authorized uses.
 * Modifications to this software may be copyrighted by their authors
 * and need not follow the licensing terms described here, provided that
 * the new terms are clearly indicated on the first page of each file where
 * they apply.
 */

/*
** defBF51x_base.h
**
** Copyright (C) 2007-2009 Analog Devices Inc., All Rights Reserved.
**
************************************************************************************
**
** This include file contains a list of macro "defines" to enable the programmer
** to use symbolic names for the registers common to the ADSP-BF51x peripherals.
**
************************************************************************************
** System MMR Register Map
************************************************************************************/

#ifndef _DEF_BF51X_H
#define _DEF_BF51X_H

#ifdef _MISRA_RULES
#pragma diag(push)
#pragma diag(suppress:misra_rule_19_4)
#pragma diag(suppress:misra_rule_19_7)
#include <stdint.h>
#endif /* _MISRA_RULES */


/* ************************************************************************************************************** */
/*                           SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF51x                            */
/* ************************************************************************************************************** */

/* Clock and System Control		(0xFFC00000 - 0xFFC000FF)									*/
#define PLL_CTL				0xFFC00000	/* PLL Control Register								*/
#define PLL_DIV				0xFFC00004	/* PLL Divide Register								*/
#define VR_CTL				0xFFC00008	/* Voltage Regulator Control Register					*/
#define PLL_STAT				0xFFC0000C	/* PLL Status Register								*/
#define PLL_LOCKCNT			0xFFC00010	/* PLL Lock Count Register							*/
#define CHIPID        			0xFFC00014  /* Device ID Register */


/* System Interrupt Controller 	(0xFFC00100 - 0xFFC001FF)									*/
#define SWRST				0xFFC00100	/* Software Reset Register							*/
#define SYSCR				0xFFC00104	/* System Configuration Register						*/

#define SIC_IMASK0			0xFFC0010C	/* Interrupt Mask Register							*/
/* legacy register name (below) provided for backwards code compatibility */
#define SIC_IMASK				SIC_IMASK0
#define SIC_IAR0				0xFFC00110	/* Interrupt Assignment Register 0						*/
#define SIC_IAR1				0xFFC00114	/* Interrupt Assignment Register 1						*/
#define SIC_IAR2				0xFFC00118	/* Interrupt Assignment Register 2						*/
#define SIC_IAR3				0xFFC0011C	/* Interrupt Assignment Register 3						*/
#define SIC_ISR0				0xFFC00120	/* Interrupt Status Register							*/
/* legacy register name (below) provided for backwards code compatibility */
#define SIC_ISR				SIC_ISR0
#define SIC_IWR0				0xFFC00124	/* Interrupt Wakeup Register							*/
/* legacy register name (below) provided for backwards code compatibility */
#define SIC_IWR				SIC_IWR0

/* SIC Additions to ADSP-BF51x 	(0xFFC0014C - 0xFFC00162) 									*/
#define SIC_IMASK1                  0xFFC0014C  /* Interrupt Mask register of SIC2 						*/
#define SIC_IAR4                    0xFFC00150  /* Interrupt Assignment register4						*/
#define SIC_IAR5                    0xFFC00154  /* Interrupt Assignment register5 						*/
#define SIC_IAR6                    0xFFC00158  /* Interrupt Assignment register6 						*/
#define SIC_IAR7                    0xFFC0015C  /* Interrupt Assignment register7 						*/
#define SIC_ISR1                    0xFFC00160  /* Interrupt Statur register 							*/
#define SIC_IWR1                    0xFFC00164  /* Interrupt Wakeup register 							*/


/* Watchdog Timer				(0xFFC00200 - 0xFFC002FF) 									*/
#define WDOG_CTL				0xFFC00200	/* Watchdog Control Register							*/
#define WDOG_CNT				0xFFC00204	/* Watchdog Count Register							*/
#define WDOG_STAT				0xFFC00208	/* Watchdog Status Register							*/


/* Real Time Clock 			(0xFFC00300 - 0xFFC003FF) 									*/
#define RTC_STAT				0xFFC00300	/* RTC Status Register								*/
#define RTC_ICTL				0xFFC00304	/* RTC Interrupt Control Register						*/
#define RTC_ISTAT				0xFFC00308	/* RTC Interrupt Status Register						*/
#define RTC_SWCNT				0xFFC0030C	/* RTC Stopwatch Count Register						*/
#define RTC_ALARM				0xFFC00310	/* RTC Alarm Time Register							*/
#define RTC_FAST				0xFFC00314	/* RTC Prescaler Enable Register						*/
#define RTC_PREN				0xFFC00314	/* RTC Prescaler Enable Alternate Macro					*/


/* UART0 Controller 			(0xFFC00400 - 0xFFC004FF) 									*/
#define UART0_THR				0xFFC00400	/* Transmit Holding register							*/
#define UART0_RBR				0xFFC00400	/* Receive Buffer register							*/
#define UART0_DLL				0xFFC00400	/* Divisor Latch (Low-Byte)							*/
#define UART0_IER				0xFFC00404	/* Interrupt Enable Register							*/
#define UART0_DLH				0xFFC00404	/* Divisor Latch (High-Byte)							*/
#define UART0_IIR				0xFFC00408	/* Interrupt Identification Register					*/
#define UART0_LCR				0xFFC0040C	/* Line Control Register							*/
#define UART0_MCR				0xFFC00410	/* Modem Control Register							*/
#define UART0_LSR				0xFFC00414	/* Line Status Register								*/
#define UART0_SCR				0xFFC0041C	/* SCR Scratch Register								*/
#define UART0_GCTL			0xFFC00424	/* Global Control Register							*/


/* SPI Controller				(0xFFC00500 - 0xFFC005FF) 									*/
#define SPI0_CTL				0xFFC00500	/* SPI Control Register								*/
/* legacy register name (below) provided for backwards code compatibility */
#define SPI_CTL				SPI0_CTL
#define SPI0_FLG				0xFFC00504	/* SPI Flag register								*/
/* legacy register name (below) provided for backwards code compatibility */
#define SPI_FLG				SPI0_FLG
#define SPI0_STAT				0xFFC00508	/* SPI Status register								*/
/* legacy register name (below) provided for backwards code compatibility */
#define SPI_STAT				SPI0_STAT
#define SPI0_TDBR				0xFFC0050C	/* SPI Transmit Data Buffer Register					*/
/* legacy register name (below) provided for backwards code compatibility */
#define SPI_TDBR				SPI0_TDBR
#define SPI0_RDBR				0xFFC00510	/* SPI Receive Data Buffer Register						*/
/* legacy register name (below) provided for backwards code compatibility */
#define SPI_RDBR				SPI0_RDBR
#define SPI0_BAUD				0xFFC00514	/* SPI Baud rate Register							*/
/* legacy register name (below) provided for backwards code compatibility */
#define SPI_BAUD				SPI0_BAUD
#define SPI0_SHADOW			0xFFC00518	/* SPI_RDBR Shadow Register							*/
/* legacy register name (below) provided for backwards code compatibility */
#define SPI_SHADOW			SPI0_SHADOW


/* TIMER0-7 Registers 			(0xFFC00600 - 0xFFC006FF)									*/
#define TIMER0_CONFIG			0xFFC00600	/* Timer 0 Configuration Register						*/
#define TIMER0_COUNTER			0xFFC00604	/* Timer 0 Counter Register							*/
#define TIMER0_PERIOD			0xFFC00608	/* Timer 0 Period Register							*/
#define TIMER0_WIDTH			0xFFC0060C	/* Timer 0 Width Register							*/

#define TIMER1_CONFIG			0xFFC00610	/* Timer 1 Configuration Register  						*/
#define TIMER1_COUNTER			0xFFC00614	/* Timer 1 Counter Register        						*/
#define TIMER1_PERIOD			0xFFC00618	/* Timer 1 Period Register         						*/
#define TIMER1_WIDTH			0xFFC0061C	/* Timer 1 Width Register          						*/

#define TIMER2_CONFIG			0xFFC00620	/* Timer 2 Configuration Register  						*/
#define TIMER2_COUNTER			0xFFC00624	/* Timer 2 Counter Register        						*/
#define TIMER2_PERIOD			0xFFC00628	/* Timer 2 Period Register         						*/
#define TIMER2_WIDTH			0xFFC0062C	/* Timer 2 Width Register          						*/

#define TIMER3_CONFIG			0xFFC00630	/* Timer 3 Configuration Register						*/
#define TIMER3_COUNTER			0xFFC00634	/* Timer 3 Counter Register							*/
#define TIMER3_PERIOD			0xFFC00638	/* Timer 3 Period Register							*/
#define TIMER3_WIDTH			0xFFC0063C	/* Timer 3 Width Register							*/

#define TIMER4_CONFIG			0xFFC00640	/* Timer 4 Configuration Register  						*/
#define TIMER4_COUNTER			0xFFC00644	/* Timer 4 Counter Register        						*/
#define TIMER4_PERIOD			0xFFC00648	/* Timer 4 Period Register         						*/
#define TIMER4_WIDTH			0xFFC0064C	/* Timer 4 Width Register          						*/

#define TIMER5_CONFIG			0xFFC00650	/* Timer 5 Configuration Register  						*/
#define TIMER5_COUNTER			0xFFC00654	/* Timer 5 Counter Register        						*/
#define TIMER5_PERIOD			0xFFC00658	/* Timer 5 Period Register         						*/
#define TIMER5_WIDTH			0xFFC0065C	/* Timer 5 Width Register          						*/

#define TIMER6_CONFIG			0xFFC00660	/* Timer 6 Configuration Register  						*/
#define TIMER6_COUNTER			0xFFC00664	/* Timer 6 Counter Register        						*/
#define TIMER6_PERIOD			0xFFC00668	/* Timer 6 Period Register         						*/
#define TIMER6_WIDTH			0xFFC0066C	/* Timer 6 Width Register          						*/

#define TIMER7_CONFIG			0xFFC00670	/* Timer 7 Configuration Register  						*/
#define TIMER7_COUNTER			0xFFC00674	/* Timer 7 Counter Register        						*/
#define TIMER7_PERIOD			0xFFC00678	/* Timer 7 Period Register         						*/
#define TIMER7_WIDTH			0xFFC0067C	/* Timer 7 Width Register       						*/

#define TIMER_ENABLE			0xFFC00680	/* Timer Enable Register							*/
#define TIMER_DISABLE			0xFFC00684	/* Timer Disable Register							*/
#define TIMER_STATUS			0xFFC00688	/* Timer Status Register							*/


/* General Purpose I/O Port F 	(0xFFC00700 - 0xFFC007FF) 									*/
#define PORTFIO				0xFFC00700	/* Port F I/O Pin State Specify Register					*/
#define PORTFIO_CLEAR			0xFFC00704	/* Port F I/O Peripheral Interrupt Clear Register			*/
#define PORTFIO_SET			0xFFC00708	/* Port F I/O Peripheral Interrupt Set Register				*/
#define PORTFIO_TOGGLE			0xFFC0070C	/* Port F I/O Pin State Toggle Register					*/
#define PORTFIO_MASKA			0xFFC00710	/* Port F I/O Mask State Specify Interrupt A Register			*/
#define PORTFIO_MASKA_CLEAR		0xFFC00714	/* Port F I/O Mask Disable Interrupt A Register				*/
#define PORTFIO_MASKA_SET		0xFFC00718	/* Port F I/O Mask Enable Interrupt A Register				*/
#define PORTFIO_MASKA_TOGGLE		0xFFC0071C	/* Port F I/O Mask Toggle Enable Interrupt A Register			*/
#define PORTFIO_MASKB			0xFFC00720	/* Port F I/O Mask State Specify Interrupt B Register			*/
#define PORTFIO_MASKB_CLEAR		0xFFC00724	/* Port F I/O Mask Disable Interrupt B Register				*/
#define PORTFIO_MASKB_SET		0xFFC00728	/* Port F I/O Mask Enable Interrupt B Register				*/
#define PORTFIO_MASKB_TOGGLE		0xFFC0072C	/* Port F I/O Mask Toggle Enable Interrupt B Register			*/
#define PORTFIO_DIR			0xFFC00730	/* Port F I/O Direction Register						*/
#define PORTFIO_POLAR			0xFFC00734	/* Port F I/O Source Polarity Register					*/
#define PORTFIO_EDGE			0xFFC00738	/* Port F I/O Source Sensitivity Register					*/
#define PORTFIO_BOTH			0xFFC0073C	/* Port F I/O Set on BOTH Edges Register					*/
#define PORTFIO_INEN			0xFFC00740	/* Port F I/O Input Enable Register 					*/


/* SPORT0 Controller 			(0xFFC00800 - 0xFFC008FF) 									*/
#define SPORT0_TCR1			0xFFC00800	/* SPORT0 Transmit Configuration 1 Register				*/
#define SPORT0_TCR2			0xFFC00804	/* SPORT0 Transmit Configuration 2 Register				*/
#define SPORT0_TCLKDIV			0xFFC00808	/* SPORT0 Transmit Clock Divider						*/
#define SPORT0_TFSDIV			0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider					*/
#define SPORT0_TX				0xFFC00810	/* SPORT0 TX Data Register							*/
#define SPORT0_RX				0xFFC00818	/* SPORT0 RX Data Register							*/
#define SPORT0_RCR1			0xFFC00820	/* SPORT0 Transmit Configuration 1 Register				*/
#define SPORT0_RCR2			0xFFC00824	/* SPORT0 Transmit Configuration 2 Register				*/
#define SPORT0_RCLKDIV			0xFFC00828	/* SPORT0 Receive Clock Divider						*/
#define SPORT0_RFSDIV			0xFFC0082C	/* SPORT0 Receive Frame Sync Divider					*/
#define SPORT0_STAT			0xFFC00830	/* SPORT0 Status Register							*/
#define SPORT0_CHNL			0xFFC00834	/* SPORT0 Current Channel Register						*/
#define SPORT0_MCMC1			0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1			*/
#define SPORT0_MCMC2			0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2			*/
#define SPORT0_MTCS0			0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0			*/
#define SPORT0_MTCS1			0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1			*/
#define SPORT0_MTCS2			0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2			*/
#define SPORT0_MTCS3			0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3			*/
#define SPORT0_MRCS0			0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0			*/
#define SPORT0_MRCS1			0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1			*/
#define SPORT0_MRCS2			0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2			*/
#define SPORT0_MRCS3			0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3			*/


/* SPORT1 Controller 			(0xFFC00900 - 0xFFC009FF) 									*/
#define SPORT1_TCR1			0xFFC00900	/* SPORT1 Transmit Configuration 1 Register				*/
#define SPORT1_TCR2			0xFFC00904	/* SPORT1 Transmit Configuration 2 Register				*/
#define SPORT1_TCLKDIV			0xFFC00908	/* SPORT1 Transmit Clock Divider						*/
#define SPORT1_TFSDIV			0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider					*/
#define SPORT1_TX				0xFFC00910	/* SPORT1 TX Data Register							*/
#define SPORT1_RX				0xFFC00918	/* SPORT1 RX Data Register							*/
#define SPORT1_RCR1			0xFFC00920	/* SPORT1 Transmit Configuration 1 Register				*/
#define SPORT1_RCR2			0xFFC00924	/* SPORT1 Transmit Configuration 2 Register				*/
#define SPORT1_RCLKDIV			0xFFC00928	/* SPORT1 Receive Clock Divider						*/
#define SPORT1_RFSDIV			0xFFC0092C	/* SPORT1 Receive Frame Sync Divider					*/
#define SPORT1_STAT			0xFFC00930	/* SPORT1 Status Register							*/
#define SPORT1_CHNL			0xFFC00934	/* SPORT1 Current Channel Register						*/
#define SPORT1_MCMC1			0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1			*/
#define SPORT1_MCMC2			0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2			*/
#define SPORT1_MTCS0			0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0			*/
#define SPORT1_MTCS1			0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1			*/
#define SPORT1_MTCS2			0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2			*/
#define SPORT1_MTCS3			0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3			*/
#define SPORT1_MRCS0			0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0			*/
#define SPORT1_MRCS1			0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1			*/
#define SPORT1_MRCS2			0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2			*/
#define SPORT1_MRCS3			0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3			*/


/* External Bus Interface Unit 	(0xFFC00A00 - 0xFFC00AFF) 									*/
#define EBIU_AMGCTL			0xFFC00A00	/* Asynchronous Memory Global Control Register				*/
#define EBIU_AMBCTL0			0xFFC00A04	/* Asynchronous Memory Bank Control Register 0				*/
#define EBIU_AMBCTL1			0xFFC00A08	/* Asynchronous Memory Bank Control Register 1				*/
#define EBIU_SDGCTL			0xFFC00A10	/* SDRAM Global Control Register						*/
#define EBIU_SDBCTL			0xFFC00A14	/* SDRAM Bank Control Register						*/
#define EBIU_SDRRC			0xFFC00A18	/* SDRAM Refresh Rate Control Register					*/
#define EBIU_SDSTAT			0xFFC00A1C	/* SDRAM Status Register							*/


/* DMA Traffic Control Registers 	(0xFFC00B00 - 0xFFC00BFF)									*/
#define DMA_TC_PER			0xFFC00B0C	/* Traffic Control Periods Register						*/
#define DMA_TC_CNT			0xFFC00B10	/* Traffic Control Current Counts Register				*/

/* Alternate deprecated register names (below) provided for backwards code compatibility 					*/
#define DMA_TCPER				0xFFC00B0C	/* Traffic Control Periods Register						*/
#define DMA_TCCNT				0xFFC00B10	/* Traffic Control Current Counts Register				*/

/* DMA Controller 			(0xFFC00C00 - 0xFFC00FFF) 									*/
#define DMA0_NEXT_DESC_PTR		0xFFC00C00	/* DMA Channel 0 Next Descriptor Pointer Register			*/
#define DMA0_START_ADDR			0xFFC00C04	/* DMA Channel 0 Start Address Register					*/
#define DMA0_CONFIG			0xFFC00C08	/* DMA Channel 0 Configuration Register					*/
#define DMA0_X_COUNT			0xFFC00C10	/* DMA Channel 0 X Count Register						*/
#define DMA0_X_MODIFY			0xFFC00C14	/* DMA Channel 0 X Modify Register						*/
#define DMA0_Y_COUNT			0xFFC00C18	/* DMA Channel 0 Y Count Register						*/
#define DMA0_Y_MODIFY			0xFFC00C1C	/* DMA Channel 0 Y Modify Register						*/
#define DMA0_CURR_DESC_PTR		0xFFC00C20	/* DMA Channel 0 Current Descriptor Pointer Register			*/
#define DMA0_CURR_ADDR			0xFFC00C24	/* DMA Channel 0 Current Address Register					*/
#define DMA0_IRQ_STATUS			0xFFC00C28	/* DMA Channel 0 Interrupt/Status Register				*/
#define DMA0_PERIPHERAL_MAP		0xFFC00C2C	/* DMA Channel 0 Peripheral Map Register					*/
#define DMA0_CURR_X_COUNT		0xFFC00C30	/* DMA Channel 0 Current X Count Register					*/
#define DMA0_CURR_Y_COUNT		0xFFC00C38	/* DMA Channel 0 Current Y Count Register					*/

#define DMA1_NEXT_DESC_PTR		0xFFC00C40	/* DMA Channel 1 Next Descriptor Pointer Register			*/
#define DMA1_START_ADDR			0xFFC00C44	/* DMA Channel 1 Start Address Register					*/
#define DMA1_CONFIG			0xFFC00C48	/* DMA Channel 1 Configuration Register					*/
#define DMA1_X_COUNT			0xFFC00C50	/* DMA Channel 1 X Count Register						*/
#define DMA1_X_MODIFY			0xFFC00C54	/* DMA Channel 1 X Modify Register						*/
#define DMA1_Y_COUNT			0xFFC00C58	/* DMA Channel 1 Y Count Register						*/
#define DMA1_Y_MODIFY			0xFFC00C5C	/* DMA Channel 1 Y Modify Register						*/
#define DMA1_CURR_DESC_PTR		0xFFC00C60	/* DMA Channel 1 Current Descriptor Pointer Register			*/
#define DMA1_CURR_ADDR			0xFFC00C64	/* DMA Channel 1 Current Address Register					*/
#define DMA1_IRQ_STATUS			0xFFC00C68	/* DMA Channel 1 Interrupt/Status Register				*/
#define DMA1_PERIPHERAL_MAP		0xFFC00C6C	/* DMA Channel 1 Peripheral Map Register					*/
#define DMA1_CURR_X_COUNT		0xFFC00C70	/* DMA Channel 1 Current X Count Register					*/
#define DMA1_CURR_Y_COUNT		0xFFC00C78	/* DMA Channel 1 Current Y Count Register					*/

#define DMA2_NEXT_DESC_PTR		0xFFC00C80	/* DMA Channel 2 Next Descriptor Pointer Register			*/
#define DMA2_START_ADDR			0xFFC00C84	/* DMA Channel 2 Start Address Register					*/
#define DMA2_CONFIG			0xFFC00C88	/* DMA Channel 2 Configuration Register					*/
#define DMA2_X_COUNT			0xFFC00C90	/* DMA Channel 2 X Count Register						*/
#define DMA2_X_MODIFY			0xFFC00C94	/* DMA Channel 2 X Modify Register						*/
#define DMA2_Y_COUNT			0xFFC00C98	/* DMA Channel 2 Y Count Register						*/
#define DMA2_Y_MODIFY			0xFFC00C9C	/* DMA Channel 2 Y Modify Register						*/
#define DMA2_CURR_DESC_PTR		0xFFC00CA0	/* DMA Channel 2 Current Descriptor Pointer Register			*/
#define DMA2_CURR_ADDR			0xFFC00CA4	/* DMA Channel 2 Current Address Register					*/
#define DMA2_IRQ_STATUS			0xFFC00CA8	/* DMA Channel 2 Interrupt/Status Register				*/
#define DMA2_PERIPHERAL_MAP		0xFFC00CAC	/* DMA Channel 2 Peripheral Map Register					*/
#define DMA2_CURR_X_COUNT		0xFFC00CB0	/* DMA Channel 2 Current X Count Register					*/
#define DMA2_CURR_Y_COUNT		0xFFC00CB8	/* DMA Channel 2 Current Y Count Register					*/

#define DMA3_NEXT_DESC_PTR		0xFFC00CC0	/* DMA Channel 3 Next Descriptor Pointer Register			*/
#define DMA3_START_ADDR			0xFFC00CC4	/* DMA Channel 3 Start Address Register					*/
#define DMA3_CONFIG			0xFFC00CC8	/* DMA Channel 3 Configuration Register					*/
#define DMA3_X_COUNT			0xFFC00CD0	/* DMA Channel 3 X Count Register						*/
#define DMA3_X_MODIFY			0xFFC00CD4	/* DMA Channel 3 X Modify Register						*/
#define DMA3_Y_COUNT			0xFFC00CD8	/* DMA Channel 3 Y Count Register						*/
#define DMA3_Y_MODIFY			0xFFC00CDC	/* DMA Channel 3 Y Modify Register						*/
#define DMA3_CURR_DESC_PTR		0xFFC00CE0	/* DMA Channel 3 Current Descriptor Pointer Register			*/
#define DMA3_CURR_ADDR			0xFFC00CE4	/* DMA Channel 3 Current Address Register					*/
#define DMA3_IRQ_STATUS			0xFFC00CE8	/* DMA Channel 3 Interrupt/Status Register				*/
#define DMA3_PERIPHERAL_MAP		0xFFC00CEC	/* DMA Channel 3 Peripheral Map Register					*/
#define DMA3_CURR_X_COUNT		0xFFC00CF0	/* DMA Channel 3 Current X Count Register					*/
#define DMA3_CURR_Y_COUNT		0xFFC00CF8	/* DMA Channel 3 Current Y Count Register					*/

#define DMA4_NEXT_DESC_PTR		0xFFC00D00	/* DMA Channel 4 Next Descriptor Pointer Register			*/
#define DMA4_START_ADDR			0xFFC00D04	/* DMA Channel 4 Start Address Register					*/
#define DMA4_CONFIG			0xFFC00D08	/* DMA Channel 4 Configuration Register					*/
#define DMA4_X_COUNT			0xFFC00D10	/* DMA Channel 4 X Count Register						*/
#define DMA4_X_MODIFY			0xFFC00D14	/* DMA Channel 4 X Modify Register						*/
#define DMA4_Y_COUNT			0xFFC00D18	/* DMA Channel 4 Y Count Register						*/
#define DMA4_Y_MODIFY			0xFFC00D1C	/* DMA Channel 4 Y Modify Register						*/
#define DMA4_CURR_DESC_PTR		0xFFC00D20	/* DMA Channel 4 Current Descriptor Pointer Register			*/
#define DMA4_CURR_ADDR			0xFFC00D24	/* DMA Channel 4 Current Address Register					*/
#define DMA4_IRQ_STATUS			0xFFC00D28	/* DMA Channel 4 Interrupt/Status Register				*/
#define DMA4_PERIPHERAL_MAP		0xFFC00D2C	/* DMA Channel 4 Peripheral Map Register					*/
#define DMA4_CURR_X_COUNT		0xFFC00D30	/* DMA Channel 4 Current X Count Register					*/
#define DMA4_CURR_Y_COUNT		0xFFC00D38	/* DMA Channel 4 Current Y Count Register					*/

#define DMA5_NEXT_DESC_PTR		0xFFC00D40	/* DMA Channel 5 Next Descriptor Pointer Register			*/
#define DMA5_START_ADDR			0xFFC00D44	/* DMA Channel 5 Start Address Register					*/
#define DMA5_CONFIG			0xFFC00D48	/* DMA Channel 5 Configuration Register					*/
#define DMA5_X_COUNT			0xFFC00D50	/* DMA Channel 5 X Count Register						*/
#define DMA5_X_MODIFY			0xFFC00D54	/* DMA Channel 5 X Modify Register						*/
#define DMA5_Y_COUNT			0xFFC00D58	/* DMA Channel 5 Y Count Register						*/
#define DMA5_Y_MODIFY			0xFFC00D5C	/* DMA Channel 5 Y Modify Register						*/
#define DMA5_CURR_DESC_PTR		0xFFC00D60	/* DMA Channel 5 Current Descriptor Pointer Register			*/
#define DMA5_CURR_ADDR			0xFFC00D64	/* DMA Channel 5 Current Address Register					*/
#define DMA5_IRQ_STATUS			0xFFC00D68	/* DMA Channel 5 Interrupt/Status Register				*/
#define DMA5_PERIPHERAL_MAP		0xFFC00D6C	/* DMA Channel 5 Peripheral Map Register					*/
#define DMA5_CURR_X_COUNT		0xFFC00D70	/* DMA Channel 5 Current X Count Register					*/
#define DMA5_CURR_Y_COUNT		0xFFC00D78	/* DMA Channel 5 Current Y Count Register					*/

#define DMA6_NEXT_DESC_PTR		0xFFC00D80	/* DMA Channel 6 Next Descriptor Pointer Register			*/
#define DMA6_START_ADDR			0xFFC00D84	/* DMA Channel 6 Start Address Register					*/
#define DMA6_CONFIG			0xFFC00D88	/* DMA Channel 6 Configuration Register					*/
#define DMA6_X_COUNT			0xFFC00D90	/* DMA Channel 6 X Count Register						*/
#define DMA6_X_MODIFY			0xFFC00D94	/* DMA Channel 6 X Modify Register						*/
#define DMA6_Y_COUNT			0xFFC00D98	/* DMA Channel 6 Y Count Register						*/
#define DMA6_Y_MODIFY			0xFFC00D9C	/* DMA Channel 6 Y Modify Register						*/
#define DMA6_CURR_DESC_PTR		0xFFC00DA0	/* DMA Channel 6 Current Descriptor Pointer Register			*/
#define DMA6_CURR_ADDR			0xFFC00DA4	/* DMA Channel 6 Current Address Register					*/
#define DMA6_IRQ_STATUS			0xFFC00DA8	/* DMA Channel 6 Interrupt/Status Register				*/
#define DMA6_PERIPHERAL_MAP		0xFFC00DAC	/* DMA Channel 6 Peripheral Map Register					*/
#define DMA6_CURR_X_COUNT		0xFFC00DB0	/* DMA Channel 6 Current X Count Register					*/
#define DMA6_CURR_Y_COUNT		0xFFC00DB8	/* DMA Channel 6 Current Y Count Register					*/

#define DMA7_NEXT_DESC_PTR		0xFFC00DC0	/* DMA Channel 7 Next Descriptor Pointer Register			*/
#define DMA7_START_ADDR			0xFFC00DC4	/* DMA Channel 7 Start Address Register					*/
#define DMA7_CONFIG			0xFFC00DC8	/* DMA Channel 7 Configuration Register					*/
#define DMA7_X_COUNT			0xFFC00DD0	/* DMA Channel 7 X Count Register						*/
#define DMA7_X_MODIFY			0xFFC00DD4	/* DMA Channel 7 X Modify Register						*/
#define DMA7_Y_COUNT			0xFFC00DD8	/* DMA Channel 7 Y Count Register						*/
#define DMA7_Y_MODIFY			0xFFC00DDC	/* DMA Channel 7 Y Modify Register						*/
#define DMA7_CURR_DESC_PTR		0xFFC00DE0	/* DMA Channel 7 Current Descriptor Pointer Register			*/
#define DMA7_CURR_ADDR			0xFFC00DE4	/* DMA Channel 7 Current Address Register					*/
#define DMA7_IRQ_STATUS			0xFFC00DE8	/* DMA Channel 7 Interrupt/Status Register				*/
#define DMA7_PERIPHERAL_MAP		0xFFC00DEC	/* DMA Channel 7 Peripheral Map Register					*/
#define DMA7_CURR_X_COUNT		0xFFC00DF0	/* DMA Channel 7 Current X Count Register					*/
#define DMA7_CURR_Y_COUNT		0xFFC00DF8	/* DMA Channel 7 Current Y Count Register					*/

#define DMA8_NEXT_DESC_PTR		0xFFC00E00	/* DMA Channel 8 Next Descriptor Pointer Register			*/
#define DMA8_START_ADDR			0xFFC00E04	/* DMA Channel 8 Start Address Register					*/
#define DMA8_CONFIG			0xFFC00E08	/* DMA Channel 8 Configuration Register					*/
#define DMA8_X_COUNT			0xFFC00E10	/* DMA Channel 8 X Count Register						*/
#define DMA8_X_MODIFY			0xFFC00E14	/* DMA Channel 8 X Modify Register						*/
#define DMA8_Y_COUNT			0xFFC00E18	/* DMA Channel 8 Y Count Register						*/
#define DMA8_Y_MODIFY			0xFFC00E1C	/* DMA Channel 8 Y Modify Register						*/
#define DMA8_CURR_DESC_PTR		0xFFC00E20	/* DMA Channel 8 Current Descriptor Pointer Register			*/
#define DMA8_CURR_ADDR			0xFFC00E24	/* DMA Channel 8 Current Address Register					*/
#define DMA8_IRQ_STATUS			0xFFC00E28	/* DMA Channel 8 Interrupt/Status Register				*/
#define DMA8_PERIPHERAL_MAP		0xFFC00E2C	/* DMA Channel 8 Peripheral Map Register					*/
#define DMA8_CURR_X_COUNT		0xFFC00E30	/* DMA Channel 8 Current X Count Register					*/
#define DMA8_CURR_Y_COUNT		0xFFC00E38	/* DMA Channel 8 Current Y Count Register					*/

#define DMA9_NEXT_DESC_PTR		0xFFC00E40	/* DMA Channel 9 Next Descriptor Pointer Register			*/
#define DMA9_START_ADDR			0xFFC00E44	/* DMA Channel 9 Start Address Register					*/
#define DMA9_CONFIG			0xFFC00E48	/* DMA Channel 9 Configuration Register					*/
#define DMA9_X_COUNT			0xFFC00E50	/* DMA Channel 9 X Count Register						*/
#define DMA9_X_MODIFY			0xFFC00E54	/* DMA Channel 9 X Modify Register						*/
#define DMA9_Y_COUNT			0xFFC00E58	/* DMA Channel 9 Y Count Register						*/
#define DMA9_Y_MODIFY			0xFFC00E5C	/* DMA Channel 9 Y Modify Register						*/
#define DMA9_CURR_DESC_PTR		0xFFC00E60	/* DMA Channel 9 Current Descriptor Pointer Register			*/
#define DMA9_CURR_ADDR			0xFFC00E64	/* DMA Channel 9 Current Address Register					*/
#define DMA9_IRQ_STATUS			0xFFC00E68	/* DMA Channel 9 Interrupt/Status Register				*/
#define DMA9_PERIPHERAL_MAP		0xFFC00E6C	/* DMA Channel 9 Peripheral Map Register					*/
#define DMA9_CURR_X_COUNT		0xFFC00E70	/* DMA Channel 9 Current X Count Register					*/
#define DMA9_CURR_Y_COUNT		0xFFC00E78	/* DMA Channel 9 Current Y Count Register					*/

#define DMA10_NEXT_DESC_PTR		0xFFC00E80	/* DMA Channel 10 Next Descriptor Pointer Register			*/
#define DMA10_START_ADDR		0xFFC00E84	/* DMA Channel 10 Start Address Register					*/
#define DMA10_CONFIG			0xFFC00E88	/* DMA Channel 10 Configuration Register					*/
#define DMA10_X_COUNT			0xFFC00E90	/* DMA Channel 10 X Count Register						*/
#define DMA10_X_MODIFY			0xFFC00E94	/* DMA Channel 10 X Modify Register						*/
#define DMA10_Y_COUNT			0xFFC00E98	/* DMA Channel 10 Y Count Register						*/
#define DMA10_Y_MODIFY			0xFFC00E9C	/* DMA Channel 10 Y Modify Register						*/
#define DMA10_CURR_DESC_PTR		0xFFC00EA0	/* DMA Channel 10 Current Descriptor Pointer Register			*/
#define DMA10_CURR_ADDR			0xFFC00EA4	/* DMA Channel 10 Current Address Register				*/
#define DMA10_IRQ_STATUS		0xFFC00EA8	/* DMA Channel 10 Interrupt/Status Register				*/
#define DMA10_PERIPHERAL_MAP		0xFFC00EAC	/* DMA Channel 10 Peripheral Map Register					*/
#define DMA10_CURR_X_COUNT		0xFFC00EB0	/* DMA Channel 10 Current X Count Register				*/
#define DMA10_CURR_Y_COUNT		0xFFC00EB8	/* DMA Channel 10 Current Y Count Register				*/

#define DMA11_NEXT_DESC_PTR		0xFFC00EC0	/* DMA Channel 11 Next Descriptor Pointer Register			*/
#define DMA11_START_ADDR		0xFFC00EC4	/* DMA Channel 11 Start Address Register					*/
#define DMA11_CONFIG			0xFFC00EC8	/* DMA Channel 11 Configuration Register					*/
#define DMA11_X_COUNT			0xFFC00ED0	/* DMA Channel 11 X Count Register						*/
#define DMA11_X_MODIFY			0xFFC00ED4	/* DMA Channel 11 X Modify Register						*/
#define DMA11_Y_COUNT			0xFFC00ED8	/* DMA Channel 11 Y Count Register						*/
#define DMA11_Y_MODIFY			0xFFC00EDC	/* DMA Channel 11 Y Modify Register						*/
#define DMA11_CURR_DESC_PTR		0xFFC00EE0	/* DMA Channel 11 Current Descriptor Pointer Register			*/
#define DMA11_CURR_ADDR			0xFFC00EE4	/* DMA Channel 11 Current Address Register				*/
#define DMA11_IRQ_STATUS		0xFFC00EE8	/* DMA Channel 11 Interrupt/Status Register				*/
#define DMA11_PERIPHERAL_MAP		0xFFC00EEC	/* DMA Channel 11 Peripheral Map Register					*/
#define DMA11_CURR_X_COUNT		0xFFC00EF0	/* DMA Channel 11 Current X Count Register				*/
#define DMA11_CURR_Y_COUNT		0xFFC00EF8	/* DMA Channel 11 Current Y Count Register				*/

#define MDMA_D0_NEXT_DESC_PTR		0xFFC00F00	/* MemDMA Stream 0 Destination Next Descriptor Pointer Register 	*/
#define MDMA_D0_START_ADDR		0xFFC00F04	/* MemDMA Stream 0 Destination Start Address Register			*/
#define MDMA_D0_CONFIG			0xFFC00F08	/* MemDMA Stream 0 Destination Configuration Register			*/
#define MDMA_D0_X_COUNT			0xFFC00F10	/* MemDMA Stream 0 Destination X Count Register				*/
#define MDMA_D0_X_MODIFY		0xFFC00F14	/* MemDMA Stream 0 Destination X Modify Register			*/
#define MDMA_D0_Y_COUNT			0xFFC00F18	/* MemDMA Stream 0 Destination Y Count Register				*/
#define MDMA_D0_Y_MODIFY		0xFFC00F1C	/* MemDMA Stream 0 Destination Y Modify Register			*/
#define MDMA_D0_CURR_DESC_PTR		0xFFC00F20	/* MemDMA Stream 0 Destination Current Descriptor Pointer Register*/
#define MDMA_D0_CURR_ADDR		0xFFC00F24	/* MemDMA Stream 0 Destination Current Address Register 		*/
#define MDMA_D0_IRQ_STATUS		0xFFC00F28	/* MemDMA Stream 0 Destination Interrupt/Status Register		*/
#define MDMA_D0_PERIPHERAL_MAP	0xFFC00F2C	/* MemDMA Stream 0 Destination Peripheral Map Register  		*/
#define MDMA_D0_CURR_X_COUNT		0xFFC00F30	/* MemDMA Stream 0 Destination Current X Count Register		*/
#define MDMA_D0_CURR_Y_COUNT		0xFFC00F38	/* MemDMA Stream 0 Destination Current Y Count Register		*/

#define MDMA_S0_NEXT_DESC_PTR		0xFFC00F40	/* MemDMA Stream 0 Source Next Descriptor Pointer Register		*/
#define MDMA_S0_START_ADDR		0xFFC00F44	/* MemDMA Stream 0 Source Start Address Register			*/
#define MDMA_S0_CONFIG			0xFFC00F48	/* MemDMA Stream 0 Source Configuration Register			*/
#define MDMA_S0_X_COUNT			0xFFC00F50	/* MemDMA Stream 0 Source X Count Register				*/
#define MDMA_S0_X_MODIFY		0xFFC00F54	/* MemDMA Stream 0 Source X Modify Register				*/
#define MDMA_S0_Y_COUNT			0xFFC00F58	/* MemDMA Stream 0 Source Y Count Register				*/
#define MDMA_S0_Y_MODIFY		0xFFC00F5C	/* MemDMA Stream 0 Source Y Modify Register				*/
#define MDMA_S0_CURR_DESC_PTR		0xFFC00F60	/* MemDMA Stream 0 Source Current Descriptor Pointer Register	*/
#define MDMA_S0_CURR_ADDR		0xFFC00F64	/* MemDMA Stream 0 Source Current Address Register			*/
#define MDMA_S0_IRQ_STATUS		0xFFC00F68	/* MemDMA Stream 0 Source Interrupt/Status Register			*/
#define MDMA_S0_PERIPHERAL_MAP	0xFFC00F6C	/* MemDMA Stream 0 Source Peripheral Map Register			*/
#define MDMA_S0_CURR_X_COUNT		0xFFC00F70	/* MemDMA Stream 0 Source Current X Count Register			*/
#define MDMA_S0_CURR_Y_COUNT		0xFFC00F78	/* MemDMA Stream 0 Source Current Y Count Register			*/

#define MDMA_D1_NEXT_DESC_PTR		0xFFC00F80	/* MemDMA Stream 1 Destination Next Descriptor Pointer Register	*/
#define MDMA_D1_START_ADDR		0xFFC00F84	/* MemDMA Stream 1 Destination Start Address Register			*/
#define MDMA_D1_CONFIG			0xFFC00F88	/* MemDMA Stream 1 Destination Configuration Register			*/
#define MDMA_D1_X_COUNT			0xFFC00F90	/* MemDMA Stream 1 Destination X Count Register				*/
#define MDMA_D1_X_MODIFY		0xFFC00F94	/* MemDMA Stream 1 Destination X Modify Register			*/
#define MDMA_D1_Y_COUNT			0xFFC00F98	/* MemDMA Stream 1 Destination Y Count Register				*/
#define MDMA_D1_Y_MODIFY		0xFFC00F9C	/* MemDMA Stream 1 Destination Y Modify Register			*/
#define MDMA_D1_CURR_DESC_PTR		0xFFC00FA0	/* MemDMA Stream 1 Destination Current Descriptor Pointer Register*/
#define MDMA_D1_CURR_ADDR		0xFFC00FA4	/* MemDMA Stream 1 Destination Current Address Register		*/
#define MDMA_D1_IRQ_STATUS		0xFFC00FA8	/* MemDMA Stream 1 Destination Interrupt/Status Register		*/
#define MDMA_D1_PERIPHERAL_MAP	0xFFC00FAC	/* MemDMA Stream 1 Destination Peripheral Map Register		*/
#define MDMA_D1_CURR_X_COUNT		0xFFC00FB0	/* MemDMA Stream 1 Destination Current X Count Register		*/
#define MDMA_D1_CURR_Y_COUNT		0xFFC00FB8	/* MemDMA Stream 1 Destination Current Y Count Register		*/

#define MDMA_S1_NEXT_DESC_PTR		0xFFC00FC0	/* MemDMA Stream 1 Source Next Descriptor Pointer Register		*/
#define MDMA_S1_START_ADDR		0xFFC00FC4	/* MemDMA Stream 1 Source Start Address Register			*/
#define MDMA_S1_CONFIG			0xFFC00FC8	/* MemDMA Stream 1 Source Configuration Register			*/
#define MDMA_S1_X_COUNT			0xFFC00FD0	/* MemDMA Stream 1 Source X Count Register				*/
#define MDMA_S1_X_MODIFY		0xFFC00FD4	/* MemDMA Stream 1 Source X Modify Register				*/
#define MDMA_S1_Y_COUNT			0xFFC00FD8	/* MemDMA Stream 1 Source Y Count Register				*/
#define MDMA_S1_Y_MODIFY		0xFFC00FDC	/* MemDMA Stream 1 Source Y Modify Register				*/
#define MDMA_S1_CURR_DESC_PTR		0xFFC00FE0	/* MemDMA Stream 1 Source Current Descriptor Pointer Register	*/
#define MDMA_S1_CURR_ADDR		0xFFC00FE4	/* MemDMA Stream 1 Source Current Address Register			*/
#define MDMA_S1_IRQ_STATUS		0xFFC00FE8	/* MemDMA Stream 1 Source Interrupt/Status Register			*/
#define MDMA_S1_PERIPHERAL_MAP	0xFFC00FEC	/* MemDMA Stream 1 Source Peripheral Map Register			*/
#define MDMA_S1_CURR_X_COUNT		0xFFC00FF0	/* MemDMA Stream 1 Source Current X Count Register			*/
#define MDMA_S1_CURR_Y_COUNT		0xFFC00FF8	/* MemDMA Stream 1 Source Current Y Count Register			*/


/* Parallel Peripheral Interface 	(0xFFC01000 - 0xFFC010FF) 									*/
#define PPI_CONTROL			0xFFC01000	/* PPI Control Register								*/
#define PPI_STATUS			0xFFC01004	/* PPI Status Register								*/
#define PPI_COUNT				0xFFC01008	/* PPI Transfer Count Register						*/
#define PPI_DELAY				0xFFC0100C	/* PPI Delay Count Register							*/
#define PPI_FRAME				0xFFC01010	/* PPI Frame Length Register							*/


/* Two-Wire Interface 			(0xFFC01400 - 0xFFC014FF)									*/
#define TWI_CLKDIV			0xFFC01400	/* Serial Clock Divider Register						*/
#define TWI_CONTROL			0xFFC01404	/* TWI Control Register								*/
#define TWI_SLAVE_CTL			0xFFC01408	/* Slave Mode Control Register						*/
#define TWI_SLAVE_STAT			0xFFC0140C	/* Slave Mode Status Register							*/
#define TWI_SLAVE_ADDR			0xFFC01410	/* Slave Mode Address Register						*/
#define TWI_MASTER_CTL			0xFFC01414	/* Master Mode Control Register						*/
#define TWI_MASTER_STAT			0xFFC01418	/* Master Mode Status Register						*/
#define TWI_MASTER_ADDR			0xFFC0141C	/* Master Mode Address Register						*/
#define TWI_INT_STAT			0xFFC01420	/* TWI Interrupt Status Register						*/
#define TWI_INT_MASK			0xFFC01424	/* TWI Master Interrupt Mask Register					*/
#define TWI_FIFO_CTL			0xFFC01428	/* FIFO Control Register							*/
#define TWI_FIFO_STAT			0xFFC0142C	/* FIFO Status Register								*/
#define TWI_XMT_DATA8			0xFFC01480	/* FIFO Transmit Data Single Byte Register				*/
#define TWI_XMT_DATA16			0xFFC01484	/* FIFO Transmit Data Double Byte Register				*/
#define TWI_RCV_DATA8			0xFFC01488	/* FIFO Receive Data Single Byte Register					*/
#define TWI_RCV_DATA16			0xFFC0148C	/* FIFO Receive Data Double Byte Register					*/


/* General Purpose I/O Port G 	(0xFFC01500 - 0xFFC015FF) 									*/
#define PORTGIO				0xFFC01500	/* Port G I/O Pin State Specify Register					*/
#define PORTGIO_CLEAR			0xFFC01504	/* Port G I/O Peripheral Interrupt Clear Register			*/
#define PORTGIO_SET			0xFFC01508	/* Port G I/O Peripheral Interrupt Set Register				*/
#define PORTGIO_TOGGLE			0xFFC0150C	/* Port G I/O Pin State Toggle Register					*/
#define PORTGIO_MASKA			0xFFC01510	/* Port G I/O Mask State Specify Interrupt A Register			*/
#define PORTGIO_MASKA_CLEAR		0xFFC01514	/* Port G I/O Mask Disable Interrupt A Register				*/
#define PORTGIO_MASKA_SET		0xFFC01518	/* Port G I/O Mask Enable Interrupt A Register				*/
#define PORTGIO_MASKA_TOGGLE		0xFFC0151C	/* Port G I/O Mask Toggle Enable Interrupt A Register			*/
#define PORTGIO_MASKB			0xFFC01520	/* Port G I/O Mask State Specify Interrupt B Register			*/
#define PORTGIO_MASKB_CLEAR		0xFFC01524	/* Port G I/O Mask Disable Interrupt B Register				*/
#define PORTGIO_MASKB_SET		0xFFC01528	/* Port G I/O Mask Enable Interrupt B Register				*/
#define PORTGIO_MASKB_TOGGLE		0xFFC0152C	/* Port G I/O Mask Toggle Enable Interrupt B Register			*/
#define PORTGIO_DIR			0xFFC01530	/* Port G I/O Direction Register						*/
#define PORTGIO_POLAR			0xFFC01534	/* Port G I/O Source Polarity Register					*/
#define PORTGIO_EDGE			0xFFC01538	/* Port G I/O Source Sensitivity Register					*/
#define PORTGIO_BOTH			0xFFC0153C	/* Port G I/O Set on BOTH Edges Register					*/
#define PORTGIO_INEN			0xFFC01540	/* Port G I/O Input Enable Register						*/


/* General Purpose I/O Port H 	(0xFFC01700 - 0xFFC017FF) 									*/
#define PORTHIO				0xFFC01700	/* Port H I/O Pin State Specify Register					*/
#define PORTHIO_CLEAR			0xFFC01704	/* Port H I/O Peripheral Interrupt Clear Register			*/
#define PORTHIO_SET			0xFFC01708	/* Port H I/O Peripheral Interrupt Set Register				*/
#define PORTHIO_TOGGLE			0xFFC0170C	/* Port H I/O Pin State Toggle Register					*/
#define PORTHIO_MASKA			0xFFC01710	/* Port H I/O Mask State Specify Interrupt A Register			*/
#define PORTHIO_MASKA_CLEAR		0xFFC01714	/* Port H I/O Mask Disable Interrupt A Register				*/
#define PORTHIO_MASKA_SET		0xFFC01718	/* Port H I/O Mask Enable Interrupt A Register				*/
#define PORTHIO_MASKA_TOGGLE		0xFFC0171C	/* Port H I/O Mask Toggle Enable Interrupt A Register			*/
#define PORTHIO_MASKB			0xFFC01720	/* Port H I/O Mask State Specify Interrupt B Register			*/
#define PORTHIO_MASKB_CLEAR		0xFFC01724	/* Port H I/O Mask Disable Interrupt B Register				*/
#define PORTHIO_MASKB_SET		0xFFC01728	/* Port H I/O Mask Enable Interrupt B Register				*/
#define PORTHIO_MASKB_TOGGLE		0xFFC0172C	/* Port H I/O Mask Toggle Enable Interrupt B Register			*/
#define PORTHIO_DIR			0xFFC01730	/* Port H I/O Direction Register						*/
#define PORTHIO_POLAR			0xFFC01734	/* Port H I/O Source Polarity Register					*/
#define PORTHIO_EDGE			0xFFC01738	/* Port H I/O Source Sensitivity Register					*/
#define PORTHIO_BOTH			0xFFC0173C	/* Port H I/O Set on BOTH Edges Register					*/
#define PORTHIO_INEN			0xFFC01740	/* Port H I/O Input Enable Register						*/


/* UART1 Controller			(0xFFC02000 - 0xFFC020FF)									*/
#define UART1_THR				0xFFC02000	/* Transmit Holding register							*/
#define UART1_RBR				0xFFC02000	/* Receive Buffer register							*/
#define UART1_DLL				0xFFC02000	/* Divisor Latch (Low-Byte)							*/
#define UART1_IER				0xFFC02004	/* Interrupt Enable Register							*/
#define UART1_DLH				0xFFC02004	/* Divisor Latch (High-Byte)							*/
#define UART1_IIR				0xFFC02008	/* Interrupt Identification Register					*/
#define UART1_LCR				0xFFC0200C	/* Line Control Register							*/
#define UART1_MCR				0xFFC02010	/* Modem Control Register							*/
#define UART1_LSR				0xFFC02014	/* Line Status Register								*/
#define UART1_SCR				0xFFC0201C	/* SCR Scratch Register								*/
#define UART1_GCTL			0xFFC02024	/* Global Control Register							*/


/* Pin Control Registers		(0xFFC03200 - 0xFFC032FF)									*/
#define PORTF_FER				0xFFC03200	/* Port F Function Enable Register (Alternate/Flag*)			*/
#define PORTG_FER				0xFFC03204	/* Port G Function Enable Register (Alternate/Flag*)			*/
#define PORTH_FER				0xFFC03208	/* Port H Function Enable Register (Alternate/Flag*)			*/


/* GPIO PIN mux 				(0xFFC03210 - OxFFC03288) 									*/
#define PORTF_MUX               	0xFFC03210  /* Port F mux control 								*/
#define PORTG_MUX               	0xFFC03214  /* Port G mux control 								*/
#define PORTH_MUX               	0xFFC03218  /* Port H mux control 								*/
#define PORTF_DRIVE             	0xFFC03220  /* Port F drive strength control 						*/
#define PORTG_DRIVE             	0xFFC03224  /* Port G drive strength control 						*/
#define PORTH_DRIVE             	0xFFC03228  /* Port H drive strength control 						*/
#define PORTF_HYSTERESIS        	0xFFC03240  /* Port F Schmitt trigger control 						*/
#define PORTG_HYSTERESIS        	0xFFC03244  /* Port G Schmitt trigger control 						*/
#define PORTH_HYSTERESIS        	0xFFC03248  /* Port H Schmitt trigger control 						*/
#define NONGPIO_DRIVE           	0xFFC03280  /* Misc Port drive strength control		 				*/
#define NONGPIO_HYSTERESIS      	0xFFC03288  /* Misc Port Schmitt Trigger control					*/


/* Handshake MDMA Registers		(0xFFC03300 - 0xFFC033FF)									*/
#define HMDMA0_CONTROL			0xFFC03300	/* Handshake MDMA0 Control Register						*/
#define HMDMA0_ECINIT			0xFFC03304	/* HMDMA0 Initial Edge Count Register					*/
#define HMDMA0_BCINIT			0xFFC03308	/* HMDMA0 Initial Block Count Register					*/
#define HMDMA0_ECURGENT			0xFFC0330C	/* HMDMA0 Urgent Edge Count Threshhold Register				*/
#define HMDMA0_ECOVERFLOW		0xFFC03310	/* HMDMA0 Edge Count Overflow Interrupt Register			*/
#define HMDMA0_ECOUNT			0xFFC03314	/* HMDMA0 Current Edge Count Register					*/
#define HMDMA0_BCOUNT			0xFFC03318	/* HMDMA0 Current Block Count Register					*/

#define HMDMA1_CONTROL			0xFFC03340	/* Handshake MDMA1 Control Register						*/
#define HMDMA1_ECINIT			0xFFC03344	/* HMDMA1 Initial Edge Count Register					*/
#define HMDMA1_BCINIT			0xFFC03348	/* HMDMA1 Initial Block Count Register					*/
#define HMDMA1_ECURGENT			0xFFC0334C	/* HMDMA1 Urgent Edge Count Threshhold Register				*/
#define HMDMA1_ECOVERFLOW		0xFFC03350	/* HMDMA1 Edge Count Overflow Interrupt Register			*/
#define HMDMA1_ECOUNT			0xFFC03354	/* HMDMA1 Current Edge Count Register					*/
#define HMDMA1_BCOUNT			0xFFC03358	/* HMDMA1 Current Block Count Register					*/


/* SPI1 Controller 			(0xFFC03400 - 0xFFC034FF)									*/
#define SPI1_CTL				0xFFC03400	/* SPI0 Control Register							*/
#define SPI1_FLG				0xFFC03404	/* SPI0 Flag register								*/
#define SPI1_STAT				0xFFC03408	/* SPI0 Status register								*/
#define SPI1_TDBR				0xFFC0340C	/* SPI0 Transmit Data Buffer Register					*/
#define SPI1_RDBR				0xFFC03410	/* SPI0 Receive Data Buffer Register					*/
#define SPI1_BAUD				0xFFC03414	/* SPI0 Baud rate Register							*/
#define SPI1_SHADOW			0xFFC03418	/* SPI0_RDBR Shadow Register							*/


/* Counter Registers 			(0xFFC03500 - 0xFFC035FF)									*/
#define CNT_CONFIG			0xFFC03500  /* Configuration Register 							*/
#define CNT_IMASK				0xFFC03504  /* Interrupt Mask Register 							*/
#define CNT_STATUS			0xFFC03508  /* Status Register 								*/
#define CNT_COMMAND			0xFFC0350C  /* Command Register 								*/
#define CNT_DEBOUNCE			0xFFC03510  /* Debounce Register 								*/
#define CNT_COUNTER			0xFFC03514  /* Counter Register 								*/
#define CNT_MAX				0xFFC03518  /* Boundry Value Register - max count					*/
#define CNT_MIN				0xFFC0351C  /* Boundry Value Register - min count					*/


/* OTP/FUSE Registers 			(0xFFC03600 - 0xFFC036FF)									*/
#define OTP_CONTROL			0xFFC03600  /* OTPSEC Fuse Control  							*/
#define OTP_BEN				0xFFC03604  /* OTPSEC Fuse Byte Enable 							*/
#define OTP_STATUS			0xFFC03608  /* OTPSEC Fuse Status 								*/
#define OTP_TIMING			0xFFC0360C  /* OTPSEC Fuse SCLK Divider 							*/

/* Security Registers 																*/
#define SECURE_SYSSWT			0xFFC03620  /* OTPSEC Secure System Switches 						*/
#define SECURE_CONTROL			0xFFC03624  /* OTPSEC Secure Control							*/
#define SECURE_STATUS			0xFFC03628  /* OTPSEC Secure Status 							*/

/* OTP Read/Write Data Buffer Registers 													*/
#define OTP_DATA0				0xFFC03680  /* OTP Read Write buffer 							*/
#define OTP_DATA1  			0xFFC03684  /* OTP Read Write buffer 							*/
#define OTP_DATA2  			0xFFC03688  /* OTP Read Write buffer 							*/
#define OTP_DATA3  			0xFFC0368C  /* OTP Read Write buffer 							*/


/* Motor Control PWM Registers 	(0xFFC03700 - 0xFFC037FF)									*/
#define PWM_CTRL				0xFFC03700	/* PWM Control Register 							*/
#define PWM_STAT				0xFFC03704	/* PWM Status Register 								*/
#define PWM_TM				0xFFC03708	/* PWM Period Register 								*/
#define PWM_DT 				0xFFC0370C	/* PWM Dead Time Register							*/
#define PWM_GATE				0xFFC03710 	/* PWM Chopping Control								*/
#define PWM_CHA				0xFFC03714	/* PWM Channel A Duty Control							*/
#define PWM_CHB				0xFFC03718	/* PWM Channel B Duty Control							*/
#define PWM_CHC				0xFFC0371C	/* PWM Channel C Duty Control							*/
#define PWM_SEG				0xFFC03720	/* PWM Crossover and Output Enable						*/
#define PWM_SYNCWT			0xFFC03724	/* PWM Sync pulse width control						*/
#define PWM_CHAL				0xFFC03728	/* PWM Channel AL Duty Control (SR mode only)				*/
#define PWM_CHBL				0xFFC0372C	/* PWM Channel BL Duty Control (SR mode only)				*/
#define PWM_CHCL				0xFFC03730	/* PWM Channel CL Duty Control (SR mode only)				*/
#define PWM_LSI				0xFFC03734  /* Low Side Invert (SR mode only)						*/
#define PWM_STAT2				0xFFC03738	/* PWM Status Register								*/



/******************************************************************************************************************
** System MMR Register Bits And Macros
**
** Disclaimer:	All macros are intended to make C and Assembly code more readable.
**			Use these macros carefully, as any that do left shifts for field
**			depositing will result in the lower order bits being destroyed.  Any
**			macro that shifts left to properly position the bit-field should be
**			used as part of an OR to initialize a register and NOT as a dynamic
**			modifier UNLESS the lower order bits are saved and ORed back in when
**			the macro is used.
*******************************************************************************************************************/

/************************************** PLL AND RESET MASKS *******************************************************/

/* PLL_CTL Masks */
#define DF					0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2						*/
#define PLL_OFF				0x0002	/* PLL Not Powered								*/
#define STOPCK				0x0008	/* Core Clock Off									*/
#define PDWN				0x0020	/* Enter Deep Sleep Mode							*/
#define IN_DELAY				0x0040	/* Add 200ps Delay To EBIU Input Latches					*/
#define OUT_DELAY				0x0080	/* Add 200ps Delay To EBIU Output Signals					*/
#define BYPASS				0x0100	/* Bypass the PLL									*/
#define MSEL				0x7E00	/* Multiplier Select For CCLK/VCO Factors					*/

/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
#ifdef _MISRA_RULES
#define SET_MSEL(x)	(((x)&0x3Fu) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL					*/
#else
#define SET_MSEL(x)	(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL					*/
#endif /* _MISRA_RULES */

/* PLL_DIV Masks */
#define SSEL				0x000F	/* System Select									*/
#define CSEL				0x0030	/* Core Select									*/
#define CSEL_DIV1				0x0000	/* CCLK = VCO / 1									*/
#define CSEL_DIV2				0x0010	/* CCLK = VCO / 2									*/
#define CSEL_DIV4				0x0020	/* CCLK = VCO / 4									*/
#define CSEL_DIV8				0x0030	/* CCLK = VCO / 8									*/

/* PLL_DIV Macros	*/
#ifdef _MISRA_RULES
#define SET_SSEL(x)			((x)&0xFu)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL					*/
#else
#define SET_SSEL(x)			((x)&0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL					*/
#endif /* _MISRA_RULES */

/* VR_CTL Masks */
#define FREQ				0x3000	/* Switching Oscillator Frequency For Regulator				*/
#define HIBERNATE				0x0000	/* Powerdown/Bypass On-Board Regulation					*/

#define VLEV				0x00F0	/* Internal Voltage Level - Only Program Values Within Specifications */
#define VLEV_085				0x0040	/* VLEV = 0.85 V (See Datasheet for Regulator Tolerance)		*/
#define VLEV_090				0x0050	/* VLEV = 0.90 V (See Datasheet for Regulator Tolerance)		*/
#define VLEV_095				0x0060	/* VLEV = 0.95 V (See Datasheet for Regulator Tolerance)		*/
#define VLEV_100				0x0070	/* VLEV = 1.00 V (See Datasheet for Regulator Tolerance)		*/
#define VLEV_105				0x0080	/* VLEV = 1.05 V (See Datasheet for Regulator Tolerance)		*/
#define VLEV_110				0x0090	/* VLEV = 1.10 V (See Datasheet for Regulator Tolerance)		*/
#define VLEV_115				0x00A0	/* VLEV = 1.15 V (See Datasheet for Regulator Tolerance)		*/
#define VLEV_120				0x00B0	/* VLEV = 1.20 V (See Datasheet for Regulator Tolerance)		*/

#define WAKE				0x0100	/* Enable RTC/Reset Wakeup From Hibernate					*/
/* no USB WAKE UP */
#define PHYWE				0x0400	/* Enable PHY Wakeup From Hibernate						*/
#define CLKBUFOE				0x4000	/* CLKIN Buffer Output Enable							*/
#define PHYCLKOE				CLKBUFOE	/* Alternative legacy name for the above 					*/
#define SCKELOW				0x8000	/* Enable Drive CKE Low During Reset					*/

/* PLL_STAT Masks	*/
#define ACTIVE_PLLENABLED		0x0001	/* Processor In Active Mode With PLL Enabled				*/
#define FULL_ON				0x0002	/* Processor In Full On Mode							*/
#define ACTIVE_PLLDISABLED		0x0004	/* Processor In Active Mode With PLL Disabled				*/
#define PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached						*/
#define VSTAT				0x0080	/* Voltage Regulator Status: Regulator at programmed voltage */

/* SWRST Masks */
#define SYSTEM_RESET			0x0007	/* Initiates A System Software Reset					*/
#define DOUBLE_FAULT			0x0008	/* Core Double Fault Causes Reset						*/
#define RESET_DOUBLE			0x2000	/* SW Reset Generated By Core Double-Fault				*/
#define RESET_WDOG			0x4000	/* SW Reset Generated By Watchdog Timer					*/
#define RESET_SOFTWARE			0x8000	/* SW Reset Occurred Since Last Read Of SWRST				*/

/* SYSCR Masks */
#define BMODE_BYPASS        0x0000  /* No boot mode */
#define BMODE_FLASH         0x0001  /* Use Boot ROM to load from 8-bit or 16-bit flash */
#define BMODE_SPI0MEM_INT   0x0002  /* Boot from internal SPI0 memory */
#define BMODE_SPI0MEM_EXT   0x0003  /* Boot from external SPI0 memory */
#define BMODE_SPI0HOST      0x0004  /* Boot from SPI0 host (slave mode) */
#define BMODE_OTPMEM        0x0005  /* Boot from OTP memory */
#define BMODE_SDRAMMEM      0x0006  /* Boot from SDRAM memory (warm boot) */
#define BMODE_UART0HOST     0x0007  /* Boot from UART0 host */
#define BMODE               0x0007  /* Boot Mode. Mirror of BMODE Mode Pins */

#define BCODE 				0x00F0
#define BCODE_NORMAL 			0x0000 	/* normal boot, update PLL/VR, quickboot as by WURESET		*/
#define BCODE_NOBOOT 			0x0010 	/* bypass boot, don't update PLL/VR 					*/
#define BCODE_QUICKBOOT 		0x0020 	/* quick boot, overrule WURESET, don't update PLL/VR 			*/
#define BCODE_ALLBOOT			0x0040 	/* no quick boot, overrule WURESET, don't update PLL/VR 		*/
#define BCODE_FULLBOOT 			0x0060 	/* no quick boot, overrule WURESET, update PLL/VR 			*/

#define WURESET 				0x1000 	/* wakeup event since last hardware reset			 		*/
#define DFRESET 				0x2000 	/* recent reset was due to a double fault event 			*/
#define WDRESET 				0x4000 	/* recent reset was due to a watchdog event 				*/
#define SWRESET 				0x8000 	/* recent reset was issued by software 					*/

/*********************************  SYSTEM INTERRUPT CONTROLLER MASKS *********************************************/

/* Peripheral Masks For SIC_ISR0, SIC_IWR0, SIC_IMASK0 */
#define IRQ_PLL_WAKEUP			0x00000001	/* PLL Wakeup Interrupt			 					*/
#define IRQ_DMA_ERR0   			0x00000002  /* Error Interrupt (DMA error 0 interrupt (generic)) 			*/
#define IRQ_DMAR0      			0x00000004  /* DMAR0 Block (DMAR0 block interrupt) 					*/
#define IRQ_DMAR1      			0x00000008  /* DMAR1 Block  (DMAR1 block interrupt) 					*/
#define IRQ_DMAR0_ERR  			0x00000010  /* Error Interrupt (DMAR0 overflow error interrupt)  			*/
#define IRQ_DMAR1_ERR  			0x00000020  /* Error Interrupt (DMAR1 overflow error interrupt)  			*/
#define IRQ_PPI_ERR    			0x00000040  /* Error Interrupt (PPI error interrupt) 					*/
#define IRQ_MAC_ERR    			0x00000080  /* Error Interrupt (MAC status interrupt) 				*/
#define IRQ_SPORT0_ERR 			0x00000100  /* Error Interrupt (SPORT0 status interrupt) 				*/
#define IRQ_SPORT1_ERR 			0x00000200  /* Error Interrupt (SPORT1 status interrupt) 				*/
#define IRQ_PTP_ERR			0x00000400  /* Error Interrupt (PTP error interrupt)					*/

#define IRQ_UART0_ERR 			0x00001000  /* Error Interrupt (UART0 status interrupt) 				*/
#define IRQ_UART1_ERR  			0x00002000  /* Error Interrupt (UART1 status interrupt) 				*/
#define IRQ_RTC		   		0x00004000  /* Real Time Clock Interrupt 							*/
#define IRQ_DMA0	   			0x00008000  /* DMA channel 0 (PPI/NFC) Interrupt 					*/
#define IRQ_DMA3	   			0x00010000  /* DMA Channel 3 (SPORT0 RX) Interrupt 					*/
#define IRQ_DMA4	   			0x00020000  /* DMA Channel 4 (SPORT0 TX) Interrupt 					*/
#define IRQ_DMA5	   			0x00040000  /* DMA Channel 5 (SPORT1 RX) Interrupt 					*/
#define IRQ_DMA6	   			0x00080000  /* DMA Channel 6 (SPORT1 TX) Interrupt 		 			*/
#define IRQ_TWI		   		0x00100000  /* TWI Interrupt									*/
#define IRQ_DMA7	   			0x00200000  /* DMA Channel 7 (SPI) Interrupt 						*/
#define IRQ_DMA8	   			0x00400000  /* DMA Channel 8 (UART0 RX) Interrupt 					*/
#define IRQ_DMA9	   			0x00800000  /* DMA Channel 9 (UART0 TX) Interrupt 					*/
#define IRQ_DMA10	   			0x01000000  /* DMA Channel 10 (UART1 RX) Interrupt 					*/
#define IRQ_DMA11	   			0x02000000  /* DMA Channel 11 (UART1 TX) Interrupt 					*/
#define IRQ_OTP	   			0x04000000  /* OTP Interrupt 									*/
#define IRQ_CNT  	   			0x08000000  /* GP Counter Interrupt  							*/
#define IRQ_DMA1	   			0x10000000  /* DMA Channel 1 (EthernetRX/HOSTDP) Interrupt				*/
#define IRQ_PFA_PORTH  			0x20000000  /* PF Port H Interrupt A 							*/
#define IRQ_DMA2	   			0x40000000  /* DMA Channel 2 (Ethernet TX/NFC) Interrupt 				*/
#define IRQ_PFB_PORTH  			0x80000000  /* PF Port H  Interrupt B 							*/

/* Peripheral Masks For SIC_ISR1, SIC_IWR1, SIC_IMASK1 */
#define IRQ_TIMER0			0x00000001	/* Timer 0 Interrupt								*/
#define IRQ_TIMER1			0x00000002	/* Timer 1 Interrupt 								*/
#define IRQ_TIMER2			0x00000004	/* Timer 2 Interrupt 								*/
#define IRQ_TIMER3			0x00000008	/* Timer 3 Interrupt 								*/
#define IRQ_TIMER4			0x00000010	/* Timer 4 Interrupt 								*/
#define IRQ_TIMER5			0x00000020	/* Timer 5 Interrupt 								*/
#define IRQ_TIMER6			0x00000040	/* Timer 6 Interrupt 								*/
#define IRQ_TIMER7			0x00000080	/* Timer 7 Interrupt 								*/
#define IRQ_PFA_PORTG			0x00000100	/* PF Port G Interrupt A 							*/
#define IRQ_PFB_PORTG			0x00000200	/* PF Port G Interrupt B		 					*/
#define IRQ_DMA12				0x00000400	/* DMA Channels 12 (MDMA0 Destination) TX Interrupt			*/
#define IRQ_DMA13				0x00000400	/* DMA Channels 13 (MDMA0 Source) RX Interrupt				*/
#define IRQ_DMA14				0x00000800	/* DMA Channels 14 (MDMA1 Destination) TX Interrupt			*/
#define IRQ_DMA15				0x00000800	/* DMA Channels 15 (MDMA1 Source) RX Interrupt 				*/
#define IRQ_WDOG				0x00001000	/* Software Watchdog Timer Interrupt 					*/
#define IRQ_PFA_PORTF			0x00002000	/* PF Port F Interrupt A		 					*/
#define IRQ_PFB_PORTF			0x00004000	/* PF Port F Interrupt B 							*/
#define IRQ_SPI0_ERR     		0x00008000  /* Error Interrupt (SPI0 status interrupt) 				*/
#define IRQ_SPI1_ERR			0x00010000	/* Error Interrupt (SPI1 status interrupt)				*/

#define IRQ_RSI_INT0			0x00080000	/* USB EINT interrupt 								*/
#define IRQ_RSI_INT1			0x00100000	/* USB INT0 interrupt 								*/
#define IRQ_PWM_TRIPINT			0x00200000	/* USB INT1 interrupt 								*/
#define IRQ_PWM_SYNCINT			0x00400000	/* USB INT1 interrupt 								*/
#define IRQ_PTP_STATINT			0x00800000	/* USB DMAINT interrupt								*/


/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */
#define IWR_DISABLE_ALL        	0x00000000	/* Wakeup Disable all peripherals 						*/
#define IWR_ENABLE_ALL          	0xFFFFFFFF	/* Wakeup Enable all peripherals 						*/
/* x = pos 0 to 31, for 32-63 use value-32 */
#define IWR_ENABLE(x)           	(1 << (x))	/* Wakeup Enable Peripheral #x 						*/
#define IWR_DISABLE(x)	 (0xFFFFFFFF^(1<<(x)))	/* Wakeup Disable Peripheral #x 						*/


#ifdef _MISRA_RULES
#define _MF15 	0xFu
#define _MF7 	7u
#else
#define _MF15 	0xF
#define _MF7 	7
#endif /* _MISRA_RULES */

/* SIC_IAR0 Macros */
#define P0_IVG(x)       (((x)&_MF15)-_MF7)           /* Peripheral #0 assigned IVG #x    */
#define P1_IVG(x)       ((((x)&_MF15)-_MF7) << 0x4)  /* Peripheral #1 assigned IVG #x    */
#define P2_IVG(x)       ((((x)&_MF15)-_MF7) << 0x8)  /* Peripheral #2 assigned IVG #x    */
#define P3_IVG(x)       ((((x)&_MF15)-_MF7) << 0xC)  /* Peripheral #3 assigned IVG #x    */
#define P4_IVG(x)       ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #4 assigned IVG #x    */
#define P5_IVG(x)       ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #5 assigned IVG #x    */
#define P6_IVG(x)       ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #6 assigned IVG #x    */
#define P7_IVG(x)       ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #7 assigned IVG #x    */

/* SIC_IAR1 Macros */
#define P8_IVG(x)       (((x)&_MF15)-_MF7)           /* Peripheral #8 assigned IVG #x    */
#define P9_IVG(x)       ((((x)&_MF15)-_MF7) << 0x4)  /* Peripheral #9 assigned IVG #x    */
#define P10_IVG(x)      ((((x)&_MF15)-_MF7) << 0x8)  /* Peripheral #10 assigned IVG #x   */
#define P11_IVG(x)                                   /* Reserved                         */
#define P12_IVG(x)      ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #12 assigned IVG #x   */
#define P13_IVG(x)      ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #13 assigned IVG #x   */
#define P14_IVG(x)      ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #14 assigned IVG #x   */
#define P15_IVG(x)      ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #15 assigned IVG #x   */

/* SIC_IAR2 Macros */
#define P16_IVG(x)      (((x)&_MF15)-_MF7)           /* Peripheral #16 assigned IVG #x   */
#define P17_IVG(x)      ((((x)&_MF15)-_MF7) << 0x4)  /* Peripheral #17 assigned IVG #x   */
#define P18_IVG(x)      ((((x)&_MF15)-_MF7) << 0x8)  /* Peripheral #18 assigned IVG #x   */
#define P19_IVG(x)      ((((x)&_MF15)-_MF7) << 0xC)  /* Peripheral #19 assigned IVG #x   */
#define P20_IVG(x)      ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #20 assigned IVG #x   */
#define P21_IVG(x)      ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #21 assigned IVG #x   */
#define P22_IVG(x)      ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #22 assigned IVG #x   */
#define P23_IVG(x)      ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #23 assigned IVG #x   */

/* SIC_IAR3 Macros */
#define P24_IVG(x)      (((x)&_MF15)-_MF7)           /* Peripheral #24 assigned IVG #x   */
#define P25_IVG(x)      ((((x)&_MF15)-_MF7) << 0x4)  /* Peripheral #25 assigned IVG #x   */
#define P26_IVG(x)      ((((x)&_MF15)-_MF7) << 0x8)  /* Peripheral #26 assigned IVG #x   */
#define P27_IVG(x)      ((((x)&_MF15)-_MF7) << 0xC)  /* Peripheral #27 assigned IVG #x   */
#define P28_IVG(x)      ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #28 assigned IVG #x   */
#define P29_IVG(x)      ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #29 assigned IVG #x   */
#define P30_IVG(x)      ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #30 assigned IVG #x   */
#define P31_IVG(x)      ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #31 assigned IVG #x   */

/* SIC_IAR4 Macros */
#define P32_IVG(x)      (((x)&_MF15)-_MF7)           /* Peripheral #32 assigned IVG #x   */
#define P33_IVG(x)      ((((x)&_MF15)-_MF7) << 0x4)  /* Peripheral #33 assigned IVG #x   */
#define P34_IVG(x)      ((((x)&_MF15)-_MF7) << 0x8)  /* Peripheral #34 assigned IVG #x   */
#define P35_IVG(x)      ((((x)&_MF15)-_MF7) << 0xC)  /* Peripheral #35 assigned IVG #x   */
#define P36_IVG(x)      ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #36 assigned IVG #x   */
#define P37_IVG(x)      ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #37 assigned IVG #x   */
#define P38_IVG(x)      ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #38 assigned IVG #x   */
#define P39_IVG(x)      ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #39 assigned IVG #x   */

/* SIC_IAR5 Macros */
#define P40_IVG(x)      (((x)&_MF15)-_MF7)           /* Peripheral #40 assigned IVG #x   */
#define P41_IVG(x)      ((((x)&_MF15)-_MF7) << 0x4)  /* Peripheral #41 assigned IVG #x   */
#define P42_IVG(x)      ((((x)&_MF15)-_MF7) << 0x8)  /* Peripheral #42 assigned IVG #x   */
#define P43_IVG(x)      ((((x)&_MF15)-_MF7) << 0xC)  /* Peripheral #43 assigned IVG #x   */
#define P44_IVG(x)      ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #44 assigned IVG #x   */
#define P45_IVG(x)      ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #45 assigned IVG #x   */
#define P46_IVG(x)      ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #46 assigned IVG #x   */
#define P47_IVG(x)      ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #47 assigned IVG #x   */

/* SIC_IAR6 Macros */
#define P48_IVG(x)      (((x)&_MF15)-_MF7)           /* Peripheral #48 assigned IVG #x   */
#define P49_IVG(x)                                   /* Reserved                         */
#define P50_IVG(x)                                   /* Reserved                         */
#define P51_IVG(x)      ((((x)&_MF15)-_MF7) << 0xC)  /* Peripheral #51 assigned IVG #x   */
#define P52_IVG(x)      ((((x)&_MF15)-_MF7) << 0x10) /* Peripheral #52 assigned IVG #x   */
#define P53_IVG(x)      ((((x)&_MF15)-_MF7) << 0x14) /* Peripheral #53 assigned IVG #x   */
#define P54_IVG(x)      ((((x)&_MF15)-_MF7) << 0x18) /* Peripheral #54 assigned IVG #x   */
#define P55_IVG(x)      ((((x)&_MF15)-_MF7) << 0x1C) /* Peripheral #55 assigned IVG #x   */

/* SIC_IAR7 Macros */
#define P56_IVG(x)                                   /* Reserved                         */
#define P57_IVG(x)                                   /* Reserved                         */
#define P58_IVG(x)                                   /* Reserved                         */
#define P59_IVG(x)                                   /* Reserved                         */
#define P60_IVG(x)                                   /* Reserved                         */
#define P61_IVG(x)                                   /* Reserved                         */
#define P62_IVG(x)                                   /* Reserved                         */
#define P63_IVG(x)                                   /* Reserved                         */


/* SIC_IMASK0 Masks*/
#define SIC_UNMASK0_ALL 0x00000000        /* Unmask all peripheral interrupts */
#define SIC_MASK0_ALL   0xFFFFF3FF        /* Mask all peripheral interrupts   */
#ifdef _MISRA_RULES
#define SIC_MASK0(x) ((int32_t)1 << ((x)&0x1Fu))  /* Mask Peripheral #x interrupt  */
#define SIC_UNMASK0(x)  (0xFFFFFFFFu ^ ((uint32_t)1 << ((x)&0x1Fu)))  /*Unmask Peripheral #x interrupt*/
#else
#define SIC_MASK0(x) (1 << ((x)&0x1F))  /* Mask Peripheral #x interrupt  */
#define SIC_UNMASK0(x)  (0xFFFFFFFF ^ (1 << ((x)&0x1F)))  /* Unmask Peripheral #x interrupt */
#endif /* _MISRA_RULES */

/* SIC_IMASK1 Masks*/
#define SIC_UNMASK1_ALL 0x00000000        /* Unmask all peripheral interrupts */
#define SIC_MASK1_ALL   0xFFFFFF          /* Mask all peripheral interrupts   */
#ifdef _MISRA_RULES
#define SIC_MASK1(x) ((int32_t)1 << ((x)&0x1Fu))  /* Mask Peripheral #x interrupt  */
#define SIC_UNMASK1(x)  (0xFFFFFFFFu ^ ((uint32_t)1 << ((x)&0x1Fu)))  /*Unmask Peripheral #x interrupt*/
#else
#define SIC_MASK1(x) (1 << ((x)&0x1F))  /* Mask Peripheral #x interrupt  */
#define SIC_UNMASK1(x)  (0xFFFFFFFF ^ (1 << ((x)&0x1F)))  /* Unmask Peripheral #x interrupt */
#endif /* _MISRA_RULES */


/* SIC_IWR0 Masks*/
#define IWR0_DISABLE_ALL 0x00000000       /* Wakeup Disable all peripherals   */
#define IWR0_ENABLE_ALL  0xFFFFF3FF       /* Wakeup Enable all peripherals    */
#ifdef _MISRA_RULES
#define IWR0_ENABLE(x)   ((int32_t)1 << ((x)&0x1Fu))  /* Wakeup Enable Peripheral #x   */
#define IWR0_DISABLE(x)  (0xFFFFFFFFu ^ ((uint32_t)1 << ((x)&0x1Fu)))  /*Wakeup Disable Peripheral #x */
#else
#define IWR0_ENABLE(x)   (1 << ((x)&0x1F))  /* Wakeup Enable Peripheral #x   */
#define IWR0_DISABLE(x)  (0xFFFFFFFF ^ (1 << ((x)&0x1F)))  /* Wakeup Disable Peripheral #x  */
#endif /* _MISRA_RULES */

/* SIC_IWR1 Masks*/
#define IWR1_DISABLE_ALL 0x00000000       /* Wakeup Disable all peripherals   */
#define IWR1_ENABLE_ALL  0xFFFFFF         /* Wakeup Enable all peripherals    */
#ifdef _MISRA_RULES
#define IWR1_ENABLE(x)   ((int32_t)1 << ((x)&0x1Fu))  /* Wakeup Enable Peripheral #x   */
#define IWR1_DISABLE(x)  (0xFFFFFFFFu ^ ((uint32_t)1 << ((x)&0x1Fu)))  /* Wakeup Disable Peripheral #x*/
#else
#define IWR1_ENABLE(x)   (1 << ((x)&0x1F))  /* Wakeup Enable Peripheral #x   */
#define IWR1_DISABLE(x)  (0xFFFFFFFF ^ (1 << ((x)&0x1F)))/* Wakeup Disable Peripheral #x  */
#endif /* _MISRA_RULES */


/* ************************************** WATCHDOG TIMER MASKS ****************************************************/

/* Watchdog Timer WDOG_CTL Register Masks */
#ifdef _MISRA_RULES
#define WDEV(x)	     (((x)<<1) & 0x0006u)	/* event generated on roll over 						*/
#else
#define WDEV(x) 		(((x)<<1) & 0x0006)	/* event generated on roll over 						*/
#endif /* _MISRA_RULES */

#define WDEV_RESET			0x0000	/* generate reset event on roll over					*/
#define WDEV_NMI 				0x0002 	/* generate NMI event on roll over 						*/
#define WDEV_GPI 				0x0004 	/* generate GP IRQ on roll over 						*/
#define WDEV_NONE 			0x0006	/* no event on roll over 							*/
#define WDEN 				0x0FF0 	/* enable watchdog 								*/
#define WDDIS 				0x0AD0 	/* disable watchdog 								*/
#define WDRO 				0x8000 	/* watchdog rolled over latch 						*/

/* depreciated WDOG_CTL Register Masks for legacy code */
#define ICTL 				WDEV
#define ENABLE_RESET 			WDEV_RESET
#define WDOG_RESET 			WDEV_RESET
#define ENABLE_NMI 			WDEV_NMI
#define WDOG_NMI 				WDEV_NMI
#define ENABLE_GPI 			WDEV_GPI
#define WDOG_GPI 				WDEV_GPI
#define DISABLE_EVT 			WDEV_NONE
#define WDOG_NONE 			WDEV_NONE

#define TMR_EN 				WDEN
#define TMR_DIS 				WDDIS
#define TRO 				WDRO
#define ICTL_P0 				0x01
#define ICTL_P1 				0x02
#define TRO_P 				0x0F


/* **************************************  REAL TIME CLOCK MASKS  *************************************************/

/* RTC_STAT and RTC_ALARM Masks*/
#define RTC_SEC				0x0000003F	/* Real-Time Clock Seconds							*/
#define RTC_MIN				0x00000FC0	/* Real-Time Clock Minutes							*/
#define RTC_HR				0x0001F000	/* Real-Time Clock Hours							*/
#define RTC_DAY				0xFFFE0000	/* Real-Time Clock Days								*/

/* RTC_ALARM Macro z=day y=hr x=min w=sec	*/
#ifdef _MISRA_RULES
#define SET_ALARM(z,y,x,w)		((((z)&0x7FFFu)<<0x11)|(((y)&0x1Fu)<<0xC)|(((x)&0x3Fu)<<0x6)|((w)&0x3Fu))
#else
#define SET_ALARM(z,y,x,w)		((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F))
#endif /* _MISRA_RULES */

/* RTC_ICTL and RTC_ISTAT Masks*/
#define STOPWATCH				0x0001 	/* Stopwatch Interrupt Enable							*/
#define ALARM				0x0002 	/* Alarm Interrupt Enable							*/
#define SECOND				0x0004 	/* Seconds (1 Hz) Interrupt Enable						*/
#define MINUTE				0x0008 	/* Minutes Interrupt Enable							*/
#define HOUR				0x0010 	/* Hours Interrupt Enable							*/
#define DAY					0x0020 	/* 24 Hours (Days) Interrupt Enable						*/
#define DAY_ALARM				0x0040 	/* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable		*/
#define WRITE_PENDING			0x4000 	/* Write Pending Status								*/
#define WRITE_COMPLETE			0x8000 	/* Write Complete Interrupt Enable						*/

/* RTC_FAST / RTC_PREN Mask */
#define PREN				0x0001 	/* Enable Prescaler, RTC Runs @1 Hz						*/


/* ************************************ UART CONTROLLER MASKS *****************************************************/

/* UARTx_LCR Masks*/
#ifdef _MISRA_RULES
#define WLS(x)		(((x)-5u) & 0x03u)	/* Word Length Select 								*/
#else
#define WLS(x)		  (((x)-5) & 0x03)	/* Word Length Select 								*/
#endif /* _MISRA_RULES */

#define STB					0x04		/* Stop Bits									*/
#define PEN					0x08		/* Parity Enable									*/
#define EPS					0x10		/* Even Parity Select								*/
#define STP					0x20		/* Stick Parity									*/
#define SB					0x40		/* Set Break									*/
#define DLAB				0x80		/* Divisor Latch Access								*/

/* UARTx_MCR Mask	*/
#define LOOP_ENA				0x10		/* Loopback Mode Enable 							*/
#define LOOP_ENA_P			0x04

/* UARTx_LSR Masks */
#define DR					0x01		/* Data Ready									*/
#define OE					0x02		/* Overrun Error									*/
#define PE					0x04		/* Parity Error									*/
#define FE					0x08		/* Framing Error									*/
#define BI					0x10		/* Break Interrupt								*/
#define THRE				0x20		/* THR Empty									*/
#define TEMT				0x40		/* TSR and UART_THR Empty							*/

/* UARTx_IER Masks*/
#define ERBFI				0x01		/* Enable Receive Buffer Full Interrupt					*/
#define ETBEI				0x02		/* Enable Transmit Buffer Empty Interrupt					*/
#define ELSI				0x04		/* Enable RX Status Interrupt							*/

/* UARTx_IIR Masks*/
#define NINT				0x01		/* Pending Interrupt								*/
#define STATUS				0x06		/* Highest Priority Pending Interrupt					*/

/* UARTx_GCTL Masks*/
#define UCEN				0x01		/* Enable UARTx Clocks								*/
#define IREN				0x02		/* Enable IrDA Mode								*/
#define TPOLC				0x04		/* IrDA TX Polarity Change							*/
#define RPOLC				0x08		/* IrDA RX Polarity Change							*/
#define FPE					0x10		/* Force Parity Error On Transmit						*/
#define FFE					0x20		/* Force Framing Error On Transmit						*/

/* Bit masks for UART Divisor Latch Registers: UARTx_DLL & UARTx_DLH */
#define UARTDLL                 	0x00FF	/* Divisor Latch Low Byte 							*/
#define UARTDLH                	0xFF00	/* Divisor Latch High Byte 							*/


/********************************  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  ***************************************/

/* SPI_CTL Masks*/
#define TIMOD				0x0003	/* Transfer Initiate Mode							*/
#define RDBR_CORE				0x0000	/* RDBR Read Initiates, IRQ When RDBR Full				*/
#define TDBR_CORE				0x0001	/* TDBR Write Initiates, IRQ When TDBR Empty				*/
#define RDBR_DMA				0x0002	/* DMA Read, DMA Until FIFO Empty						*/
#define TDBR_DMA				0x0003	/* DMA Write, DMA Until FIFO Full						*/
#define SZ					0x0004	/* Send Zero (When TDBR Empty, Send Zero/Last*)				*/
#define GM					0x0008	/* Get More (When RDBR Full, Overwrite/Discard*)			*/
#define PSSE				0x0010	/* Slave-Select Input Enable							*/
#define EMISO				0x0020	/* Enable MISO As Output							*/
#define SIZE				0x0100	/* Size of Words (16/8* Bits)							*/
#define LSBF				0x0200	/* LSB First									*/
#define CPHA				0x0400	/* Clock Phase									*/
#define CPOL				0x0800	/* Clock Polarity									*/
#define MSTR				0x1000	/* Master/Slave*									*/
#define WOM					0x2000	/* Write Open Drain Master							*/
#define SPE					0x4000	/* SPI Enable									*/

/* SPI_FLG Masks*/
#define FLS1				0x0002	/* Enables SPI_FLOUT1 as SPI Slave-Select Output			*/
#define FLS2				0x0004	/* Enables SPI_FLOUT2 as SPI Slave-Select Output			*/
#define FLS3				0x0008	/* Enables SPI_FLOUT3 as SPI Slave-Select Output			*/
#define FLS4				0x0010	/* Enables SPI_FLOUT4 as SPI Slave-Select Output			*/
#define FLS5				0x0020	/* Enables SPI_FLOUT5 as SPI Slave-Select Output			*/
#define FLS6				0x0040	/* Enables SPI_FLOUT6 as SPI Slave-Select Output			*/
#define FLS7				0x0080	/* Enables SPI_FLOUT7 as SPI Slave-Select Output			*/
#define FLG1				0xFDFF	/* Activates SPI_FLOUT1 							*/
#define FLG2				0xFBFF	/* Activates SPI_FLOUT2								*/
#define FLG3				0xF7FF	/* Activates SPI_FLOUT3								*/
#define FLG4				0xEFFF	/* Activates SPI_FLOUT4								*/
#define FLG5				0xDFFF	/* Activates SPI_FLOUT5								*/
#define FLG6				0xBFFF	/* Activates SPI_FLOUT6								*/
#define FLG7				0x7FFF	/* Activates SPI_FLOUT7								*/

/* SPI_STAT Masks*/
#define SPIF				0x0001	/* SPI Finished (Single-Word Transfer Complete)				*/
#define MODF				0x0002	/* Mode Fault Error (Another Device Tried To Become Master)		*/
#define TXE					0x0004	/* Transmission Error (Data Sent With No New Data In TDBR)		*/
#define TXS					0x0008	/* SPI_TDBR Data Buffer Status (Full/Empty*)				*/
#define RBSY				0x0010	/* Receive Error (Data Received With RDBR Full)				*/
#define RXS					0x0020	/* SPI_RDBR Data Buffer Status (Full/Empty*)				*/
#define TXCOL				0x0040	/* Transmit Collision Error (Corrupt Data May Have Been Sent)	*/


/***********************************  GENERAL PURPOSE TIMER MASKS  ************************************************/
/* TIMER_ENABLE Masks*/
#define TIMEN0				0x0001	/* Enable Timer 0									*/
#define TIMEN1				0x0002	/* Enable Timer 1									*/
#define TIMEN2				0x0004	/* Enable Timer 2									*/
#define TIMEN3				0x0008	/* Enable Timer 3									*/
#define TIMEN4				0x0010	/* Enable Timer 4									*/
#define TIMEN5				0x0020	/* Enable Timer 5									*/
#define TIMEN6				0x0040	/* Enable Timer 6									*/
#define TIMEN7				0x0080	/* Enable Timer 7									*/

/* TIMER_DISABLE Masks*/
#define TIMDIS0				TIMEN0	/* Disable Timer 0								*/
#define TIMDIS1				TIMEN1	/* Disable Timer 1								*/
#define TIMDIS2				TIMEN2	/* Disable Timer 2								*/
#define TIMDIS3				TIMEN3	/* Disable Timer 3								*/
#define TIMDIS4				TIMEN4	/* Disable Timer 4								*/
#define TIMDIS5				TIMEN5	/* Disable Timer 5								*/
#define TIMDIS6				TIMEN6	/* Disable Timer 6								*/
#define TIMDIS7				TIMEN7	/* Disable Timer 7								*/

/* TIMER_STATUS Masks*/
#define TIMIL0				0x00000001	/* Timer 0 Interrupt								*/
#define TIMIL1				0x00000002	/* Timer 1 Interrupt								*/
#define TIMIL2				0x00000004	/* Timer 2 Interrupt								*/
#define TIMIL3				0x00000008	/* Timer 3 Interrupt								*/
#define TOVF_ERR0				0x00000010	/* Timer 0 Counter Overflow							*/
#define TOVF_ERR1				0x00000020	/* Timer 1 Counter Overflow							*/
#define TOVF_ERR2				0x00000040	/* Timer 2 Counter Overflow							*/
#define TOVF_ERR3				0x00000080	/* Timer 3 Counter Overflow							*/
#define TRUN0				0x00001000	/* Timer 0 Slave Enable Status						*/
#define TRUN1				0x00002000	/* Timer 1 Slave Enable Status						*/
#define TRUN2				0x00004000	/* Timer 2 Slave Enable Status						*/
#define TRUN3				0x00008000	/* Timer 3 Slave Enable Status						*/
#define TIMIL4				0x00010000	/* Timer 4 Interrupt								*/
#define TIMIL5				0x00020000	/* Timer 5 Interrupt								*/
#define TIMIL6				0x00040000	/* Timer 6 Interrupt								*/
#define TIMIL7				0x00080000	/* Timer 7 Interrupt								*/
#define TOVF_ERR4				0x00100000	/* Timer 4 Counter Overflow							*/
#define TOVF_ERR5				0x00200000	/* Timer 5 Counter Overflow							*/
#define TOVF_ERR6				0x00400000	/* Timer 6 Counter Overflow							*/
#define TOVF_ERR7				0x00800000	/* Timer 7 Counter Overflow							*/
#define TRUN4				0x10000000	/* Timer 4 Slave Enable Status						*/
#define TRUN5				0x20000000	/* Timer 5 Slave Enable Status						*/
#define TRUN6				0x40000000	/* Timer 6 Slave Enable Status						*/
#define TRUN7				0x80000000	/* Timer 7 Slave Enable Status						*/

/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
#define TOVL_ERR0 			TOVF_ERR0
#define TOVL_ERR1				TOVF_ERR1
#define TOVL_ERR2 			TOVF_ERR2
#define TOVL_ERR3 			TOVF_ERR3
#define TOVL_ERR4 			TOVF_ERR4
#define TOVL_ERR5 			TOVF_ERR5
#define TOVL_ERR6 			TOVF_ERR6
#define TOVL_ERR7 			TOVF_ERR7

/* TIMERx_CONFIG Masks */
#define PWM_OUT				0x0001	/* Pulse-Width Modulation Output Mode					*/
#define WDTH_CAP				0x0002	/* Width Capture Input Mode							*/
#define EXT_CLK				0x0003	/* External Clock Mode								*/
#define PULSE_HI				0x0004	/* Action Pulse (Positive/Negative*)					*/
#define PERIOD_CNT			0x0008	/* Period Count									*/
#define IRQ_ENA				0x0010	/* Interrupt Request Enable							*/
#define TIN_SEL				0x0020	/* Timer Input Select								*/
#define OUT_DIS				0x0040	/* Output Pad Disable								*/
#define CLK_SEL				0x0080	/* Timer Clock Select								*/
#define TOGGLE_HI				0x0100	/* PWM_OUT PULSE_HI Toggle Mode						*/
#define EMU_RUN				0x0200	/* Emulation Behavior Select							*/
#define ERR_TYP				0xC000	/* Error Type									*/


/* *************************************   GPIO PORTS F, G, H MASKS  **********************************************/

/*  General Purpose IO (0xFFC00700 - 0xFFC007FF)  Masks */
/* Port F Masks */
#define PF0					0x0001
#define PF1					0x0002
#define PF2					0x0004
#define PF3					0x0008
#define PF4					0x0010
#define PF5					0x0020
#define PF6					0x0040
#define PF7					0x0080
#define PF8					0x0100
#define PF9					0x0200
#define PF10				0x0400
#define PF11				0x0800
#define PF12				0x1000
#define PF13				0x2000
#define PF14				0x4000
#define PF15				0x8000

/* Port G Masks */
#define PG0					0x0001
#define PG1					0x0002
#define PG2					0x0004
#define PG3					0x0008
#define PG4					0x0010
#define PG5					0x0020
#define PG6					0x0040
#define PG7					0x0080
#define PG8					0x0100
#define PG9					0x0200
#define PG10				0x0400
#define PG11				0x0800
#define PG12				0x1000
#define PG13				0x2000
#define PG14				0x4000
#define PG15				0x8000

/* Port H Masks */
#define PH0					0x0001
#define PH1					0x0002
#define PH2					0x0004
#define PH3					0x0008
#define PH4					0x0010
#define PH5					0x0020
#define PH6					0x0040
#define PH7					0x0080
#define PH8					0x0100

/* **************************************  SERIAL PORT MASKS  *****************************************************/
/* SPORTx_TCR1 Masks */
#define TSPEN				0x0001	/* Transmit Enable								*/
#define ITCLK				0x0002	/* Internal Transmit Clock Select						*/
#define DTYPE_NORM			0x0004	/* Data Format Normal								*/
#define DTYPE_ULAW			0x0008	/* Compand Using u-Law								*/
#define DTYPE_ALAW			0x000C	/* Compand Using A-Law								*/
#define TLSBIT				0x0010	/* Transmit Bit Order								*/
#define ITFS				0x0200	/* Internal Transmit Frame Sync Select					*/
#define TFSR				0x0400	/* Transmit Frame Sync Required Select					*/
#define DITFS				0x0800	/* Data-Independent Transmit Frame Sync Select				*/
#define LTFS				0x1000	/* Low Transmit Frame Sync Select						*/
#define LATFS				0x2000	/* Late Transmit Frame Sync Select						*/
#define TCKFE				0x4000	/* Clock Falling Edge Select							*/

/* SPORTx_TCR2 Masks and Macro */
#ifdef _MISRA_RULES
#define SLEN(x)				((x)&0x1Fu)	/* SPORT TX Word Length (2 - 31)						*/
#else
#define SLEN(x)				((x)&0x1F)	/* SPORT TX Word Length (2 - 31)						*/
#endif /* _MISRA_RULES */

#define TXSE				0x0100	/* TX Secondary Enable								*/
#define TSFSE				0x0200	/* Transmit Stereo Frame Sync Enable					*/
#define TRFST				0x0400	/* Left/Right Order (1 = Right Channel 1st)				*/

/* SPORTx_RCR1 Masks */
#define RSPEN				0x0001	/* Receive Enable 								*/
#define IRCLK				0x0002	/* Internal Receive Clock Select 						*/
#define DTYPE_NORM			0x0004	/* Data Format Normal								*/
#define DTYPE_ULAW			0x0008	/* Compand Using u-Law								*/
#define DTYPE_ALAW			0x000C	/* Compand Using A-Law								*/
#define RLSBIT				0x0010	/* Receive Bit Order								*/
#define IRFS				0x0200	/* Internal Receive Frame Sync Select 					*/
#define RFSR				0x0400	/* Receive Frame Sync Required Select 					*/
#define LRFS				0x1000	/* Low Receive Frame Sync Select 						*/
#define LARFS				0x2000	/* Late Receive Frame Sync Select 						*/
#define RCKFE				0x4000	/* Clock Falling Edge Select 							*/

/* SPORTx_RCR2 Masks */
#ifdef _MISRA_RULES
#define SLEN(x)				((x)&0x1Fu)	/* SPORT RX Word Length (2 - 31)						*/
#else
#define SLEN(x)				((x)&0x1F)	/* SPORT RX Word Length (2 - 31)						*/
#endif /* _MISRA_RULES */

#define RXSE				0x0100	/* RX Secondary Enable								*/
#define RSFSE				0x0200	/* RX Stereo Frame Sync Enable						*/
#define RRFST				0x0400	/* Right-First Data Order 							*/

/* SPORTx_STAT Masks */
#define RXNE				0x0001	/* Receive FIFO Not Empty Status						*/
#define RUVF				0x0002	/* Sticky Receive Underflow Status						*/
#define ROVF				0x0004	/* Sticky Receive Overflow Status						*/
#define TXF					0x0008	/* Transmit FIFO Full Status							*/
#define TUVF				0x0010	/* Sticky Transmit Underflow Status						*/
#define TOVF				0x0020	/* Sticky Transmit Overflow Status						*/
#define TXHRE				0x0040	/* Transmit Hold Register Empty						*/

/* SPORTx_MCMC1 Macros */
#ifdef _MISRA_RULES
#define WOFF(x)		((x) & 0x3FFu) 		/* Multichannel Window Offset Field						*/
/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits*/
#define WSIZE(x)		(((((x)>>0x3)-1u)&0xFu) << 0xC) /* Multichannel Window Size = (x/8)-1				*/
#else
#define WOFF(x)		((x) & 0x3FF) 		/* Multichannel Window Offset Field						*/
/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits								*/
#define WSIZE(x)	(((((x)>>0x3)-1)&0xF) << 0xC)	/* Multichannel Window Size = (x/8)-1					*/
#endif /* _MISRA_RULES */

/* SPORTx_MCMC2 Masks */
#define REC_BYPASS			0x0000	/* Bypass Mode (No Clock Recovery)						*/
#define REC_2FROM4			0x0002	/* Recover 2 MHz Clock from 4 MHz Clock					*/
#define REC_8FROM16			0x0003	/* Recover 8 MHz Clock from 16 MHz Clock					*/
#define MCDTXPE				0x0004 	/* Multichannel DMA Transmit Packing					*/
#define MCDRXPE				0x0008 	/* Multichannel DMA Receive Packing						*/
#define MCMEN				0x0010 	/* Multichannel Frame Mode Enable						*/
#define FSDR				0x0080 	/* Multichannel Frame Sync to Data Relationship				*/
#define MFD_0				0x0000	/* Multichannel Frame Delay = 0						*/
#define MFD_1				0x1000	/* Multichannel Frame Delay = 1						*/
#define MFD_2				0x2000	/* Multichannel Frame Delay = 2						*/
#define MFD_3				0x3000	/* Multichannel Frame Delay = 3						*/
#define MFD_4				0x4000	/* Multichannel Frame Delay = 4						*/
#define MFD_5				0x5000	/* Multichannel Frame Delay = 5						*/
#define MFD_6				0x6000	/* Multichannel Frame Delay = 6						*/
#define MFD_7				0x7000	/* Multichannel Frame Delay = 7						*/
#define MFD_8				0x8000	/* Multichannel Frame Delay = 8						*/
#define MFD_9				0x9000	/* Multichannel Frame Delay = 9						*/
#define MFD_10				0xA000	/* Multichannel Frame Delay = 10						*/
#define MFD_11				0xB000	/* Multichannel Frame Delay = 11						*/
#define MFD_12				0xC000	/* Multichannel Frame Delay = 12						*/
#define MFD_13				0xD000	/* Multichannel Frame Delay = 13						*/
#define MFD_14				0xE000	/* Multichannel Frame Delay = 14						*/
#define MFD_15				0xF000	/* Multichannel Frame Delay = 15						*/


/***********************************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  ***************************************/

/* EBIU_AMGCTL Masks */
#define AMCKEN				0x0001	/* Enable CLKOUT									*/
#define AMBEN           		0x000e      /* Async bank enable                          		      	*/
#define AMBEN_NONE			0x0000	/* All Banks Disabled								*/
#define AMBEN_B0				0x0002	/* Enable Async Memory Bank 0 only						*/
#define AMBEN_B0_B1			0x0004	/* Enable Async Memory Banks 0 & 1 only					*/
#define AMBEN_B0_B1_B2			0x0006	/* Enable Async Memory Banks 0, 1, and 2					*/
#define AMBEN_ALL				0x0008	/* Enable Async Memory Banks (all) 0, 1, 2, and 3			*/
#define CDPRIO 				0x0100	/* DMA has priority over core for for external accesses 		*/

/* EBIU_AMBCTL0 Masks */
#define B0RDYEN				0x00000001  /* Bank 0 (B0) RDY Enable							*/
#define B0RDYPOL				0x00000002  /* B0 RDY Active High								*/
#define B0TT_1				0x00000004  /* B0 Transition Time (Read to Write) = 1 cycle				*/
#define B0TT_2				0x00000008  /* B0 Transition Time (Read to Write) = 2 cycles			*/
#define B0TT_3				0x0000000C  /* B0 Transition Time (Read to Write) = 3 cycles			*/
#define B0TT_4				0x00000000  /* B0 Transition Time (Read to Write) = 4 cycles			*/
#define B0ST_1				0x00000010  /* B0 Setup Time (AOE to Read/Write) = 1 cycle				*/
#define B0ST_2				0x00000020  /* B0 Setup Time (AOE to Read/Write) = 2 cycles				*/
#define B0ST_3				0x00000030  /* B0 Setup Time (AOE to Read/Write) = 3 cycles				*/
#define B0ST_4				0x00000000  /* B0 Setup Time (AOE to Read/Write) = 4 cycles				*/
#define B0HT_1				0x00000040  /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle				*/
#define B0HT_2				0x00000080  /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles			*/
#define B0HT_3				0x000000C0  /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles			*/
#define B0HT_0				0x00000000  /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles			*/
#define B0RAT_1				0x00000100  /* B0 Read Access Time = 1 cycle						*/
#define B0RAT_2				0x00000200  /* B0 Read Access Time = 2 cycles						*/
#define B0RAT_3				0x00000300  /* B0 Read Access Time = 3 cycles						*/
#define B0RAT_4				0x00000400  /* B0 Read Access Time = 4 cycles						*/
#define B0RAT_5				0x00000500  /* B0 Read Access Time = 5 cycles						*/
#define B0RAT_6				0x00000600  /* B0 Read Access Time = 6 cycles						*/
#define B0RAT_7				0x00000700  /* B0 Read Access Time = 7 cycles						*/
#define B0RAT_8				0x00000800  /* B0 Read Access Time = 8 cycles						*/
#define B0RAT_9				0x00000900  /* B0 Read Access Time = 9 cycles						*/
#define B0RAT_10				0x00000A00  /* B0 Read Access Time = 10 cycles						*/
#define B0RAT_11				0x00000B00  /* B0 Read Access Time = 11 cycles						*/
#define B0RAT_12				0x00000C00  /* B0 Read Access Time = 12 cycles						*/
#define B0RAT_13				0x00000D00  /* B0 Read Access Time = 13 cycles						*/
#define B0RAT_14				0x00000E00  /* B0 Read Access Time = 14 cycles						*/
#define B0RAT_15				0x00000F00  /* B0 Read Access Time = 15 cycles						*/
#define B0WAT_1				0x00001000  /* B0 Write Access Time = 1 cycle						*/
#define B0WAT_2				0x00002000  /* B0 Write Access Time = 2 cycles						*/
#define B0WAT_3				0x00003000  /* B0 Write Access Time = 3 cycles						*/
#define B0WAT_4				0x00004000  /* B0 Write Access Time = 4 cycles						*/
#define B0WAT_5				0x00005000  /* B0 Write Access Time = 5 cycles						*/
#define B0WAT_6				0x00006000  /* B0 Write Access Time = 6 cycles						*/
#define B0WAT_7				0x00007000  /* B0 Write Access Time = 7 cycles						*/
#define B0WAT_8				0x00008000  /* B0 Write Access Time = 8 cycles						*/
#define B0WAT_9				0x00009000  /* B0 Write Access Time = 9 cycles						*/
#define B0WAT_10				0x0000A000  /* B0 Write Access Time = 10 cycles						*/
#define B0WAT_11				0x0000B000  /* B0 Write Access Time = 11 cycles						*/
#define B0WAT_12				0x0000C000  /* B0 Write Access Time = 12 cycles						*/
#define B0WAT_13				0x0000D000  /* B0 Write Access Time = 13 cycles						*/
#define B0WAT_14				0x0000E000  /* B0 Write Access Time = 14 cycles						*/
#define B0WAT_15				0x0000F000  /* B0 Write Access Time = 15 cycles						*/

#define B1RDYEN				0x00010000  /* Bank 1 (B1) RDY Enable  		                     		*/
#define B1RDYPOL				0x00020000  /* B1 RDY Active High               	            		*/
#define B1TT_1				0x00040000  /* B1 Transition Time (Read to Write) = 1 cycle 			*/
#define B1TT_2				0x00080000  /* B1 Transition Time (Read to Write) = 2 cycles			*/
#define B1TT_3				0x000C0000  /* B1 Transition Time (Read to Write) = 3 cycles			*/
#define B1TT_4				0x00000000  /* B1 Transition Time (Read to Write) = 4 cycles			*/
#define B1ST_1				0x00100000  /* B1 Setup Time (AOE to Read/Write) = 1 cycle  			*/
#define B1ST_2				0x00200000  /* B1 Setup Time (AOE to Read/Write) = 2 cycles 			*/
#define B1ST_3				0x00300000  /* B1 Setup Time (AOE to Read/Write) = 3 cycles 			*/
#define B1ST_4				0x00000000  /* B1 Setup Time (AOE to Read/Write) = 4 cycles 			*/
#define B1HT_1				0x00400000  /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle 			*/
#define B1HT_2				0x00800000  /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles			*/
#define B1HT_3				0x00C00000  /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles			*/
#define B1HT_0				0x00000000  /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles			*/
#define B1RAT_1				0x01000000  /* B1 Read Access Time = 1 cycle						*/
#define B1RAT_2				0x02000000  /* B1 Read Access Time = 2 cycles						*/
#define B1RAT_3				0x03000000  /* B1 Read Access Time = 3 cycles						*/
#define B1RAT_4				0x04000000  /* B1 Read Access Time = 4 cycles						*/
#define B1RAT_5				0x05000000  /* B1 Read Access Time = 5 cycles						*/
#define B1RAT_6				0x06000000  /* B1 Read Access Time = 6 cycles						*/
#define B1RAT_7				0x07000000  /* B1 Read Access Time = 7 cycles						*/
#define B1RAT_8				0x08000000  /* B1 Read Access Time = 8 cycles						*/
#define B1RAT_9				0x09000000  /* B1 Read Access Time = 9 cycles						*/
#define B1RAT_10				0x0A000000  /* B1 Read Access Time = 10 cycles						*/
#define B1RAT_11				0x0B000000  /* B1 Read Access Time = 11 cycles						*/
#define B1RAT_12				0x0C000000  /* B1 Read Access Time = 12 cycles						*/
#define B1RAT_13				0x0D000000  /* B1 Read Access Time = 13 cycles						*/
#define B1RAT_14				0x0E000000  /* B1 Read Access Time = 14 cycles						*/
#define B1RAT_15				0x0F000000  /* B1 Read Access Time = 15 cycles						*/
#define B1WAT_1				0x10000000  /* B1 Write Access Time = 1 cycle						*/
#define B1WAT_2				0x20000000  /* B1 Write Access Time = 2 cycles						*/
#define B1WAT_3				0x30000000  /* B1 Write Access Time = 3 cycles						*/
#define B1WAT_4				0x40000000  /* B1 Write Access Time = 4 cycles						*/
#define B1WAT_5				0x50000000  /* B1 Write Access Time = 5 cycles						*/
#define B1WAT_6				0x60000000  /* B1 Write Access Time = 6 cycles						*/
#define B1WAT_7				0x70000000  /* B1 Write Access Time = 7 cycles						*/
#define B1WAT_8				0x80000000  /* B1 Write Access Time = 8 cycles						*/
#define B1WAT_9				0x90000000  /* B1 Write Access Time = 9 cycles						*/
#define B1WAT_10				0xA0000000  /* B1 Write Access Time = 10 cycles						*/
#define B1WAT_11				0xB0000000  /* B1 Write Access Time = 11 cycles						*/
#define B1WAT_12				0xC0000000  /* B1 Write Access Time = 12 cycles						*/
#define B1WAT_13				0xD0000000  /* B1 Write Access Time = 13 cycles						*/
#define B1WAT_14				0xE0000000  /* B1 Write Access Time = 14 cycles						*/
#define B1WAT_15				0xF0000000  /* B1 Write Access Time = 15 cycles						*/

/* EBIU_AMBCTL1 Masks */
#define B2RDYEN				0x00000001  /* Bank 2 (B2) RDY Enable							*/
#define B2RDYPOL				0x00000002  /* B2 RDY Active High								*/
#define B2TT_1				0x00000004  /* B2 Transition Time (Read to Write) = 1 cycle				*/
#define B2TT_2				0x00000008  /* B2 Transition Time (Read to Write) = 2 cycles			*/
#define B2TT_3				0x0000000C  /* B2 Transition Time (Read to Write) = 3 cycles			*/
#define B2TT_4				0x00000000  /* B2 Transition Time (Read to Write) = 4 cycles			*/
#define B2ST_1				0x00000010  /* B2 Setup Time (AOE to Read/Write) = 1 cycle				*/
#define B2ST_2				0x00000020  /* B2 Setup Time (AOE to Read/Write) = 2 cycles				*/
#define B2ST_3				0x00000030  /* B2 Setup Time (AOE to Read/Write) = 3 cycles				*/
#define B2ST_4				0x00000000  /* B2 Setup Time (AOE to Read/Write) = 4 cycles				*/
#define B2HT_1				0x00000040  /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle				*/
#define B2HT_2				0x00000080  /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles			*/
#define B2HT_3				0x000000C0  /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles			*/
#define B2HT_0				0x00000000  /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles			*/
#define B2RAT_1				0x00000100  /* B2 Read Access Time = 1 cycle						*/
#define B2RAT_2				0x00000200  /* B2 Read Access Time = 2 cycles						*/
#define B2RAT_3				0x00000300  /* B2 Read Access Time = 3 cycles						*/
#define B2RAT_4				0x00000400  /* B2 Read Access Time = 4 cycles						*/
#define B2RAT_5				0x00000500  /* B2 Read Access Time = 5 cycles						*/
#define B2RAT_6				0x00000600  /* B2 Read Access Time = 6 cycles						*/
#define B2RAT_7				0x00000700  /* B2 Read Access Time = 7 cycles						*/
#define B2RAT_8				0x00000800  /* B2 Read Access Time = 8 cycles						*/
#define B2RAT_9				0x00000900  /* B2 Read Access Time = 9 cycles						*/
#define B2RAT_10				0x00000A00  /* B2 Read Access Time = 10 cycles						*/
#define B2RAT_11				0x00000B00  /* B2 Read Access Time = 11 cycles						*/
#define B2RAT_12				0x00000C00  /* B2 Read Access Time = 12 cycles						*/
#define B2RAT_13				0x00000D00  /* B2 Read Access Time = 13 cycles						*/
#define B2RAT_14				0x00000E00  /* B2 Read Access Time = 14 cycles						*/
#define B2RAT_15				0x00000F00  /* B2 Read Access Time = 15 cycles						*/
#define B2WAT_1				0x00001000  /* B2 Write Access Time = 1 cycle						*/
#define B2WAT_2				0x00002000  /* B2 Write Access Time = 2 cycles						*/
#define B2WAT_3				0x00003000  /* B2 Write Access Time = 3 cycles						*/
#define B2WAT_4				0x00004000  /* B2 Write Access Time = 4 cycles						*/
#define B2WAT_5				0x00005000  /* B2 Write Access Time = 5 cycles						*/
#define B2WAT_6				0x00006000  /* B2 Write Access Time = 6 cycles						*/
#define B2WAT_7				0x00007000  /* B2 Write Access Time = 7 cycles						*/
#define B2WAT_8				0x00008000  /* B2 Write Access Time = 8 cycles						*/
#define B2WAT_9				0x00009000  /* B2 Write Access Time = 9 cycles						*/
#define B2WAT_10				0x0000A000  /* B2 Write Access Time = 10 cycles						*/
#define B2WAT_11				0x0000B000  /* B2 Write Access Time = 11 cycles						*/
#define B2WAT_12				0x0000C000  /* B2 Write Access Time = 12 cycles						*/
#define B2WAT_13				0x0000D000  /* B2 Write Access Time = 13 cycles						*/
#define B2WAT_14				0x0000E000  /* B2 Write Access Time = 14 cycles						*/
#define B2WAT_15				0x0000F000  /* B2 Write Access Time = 15 cycles						*/

#define B3RDYEN				0x00010000  /* Bank 3 (B3) RDY Enable							*/
#define B3RDYPOL				0x00020000  /* B3 RDY Active High								*/
#define B3TT_1				0x00040000  /* B3 Transition Time (Read to Write) = 1 cycle				*/
#define B3TT_2				0x00080000  /* B3 Transition Time (Read to Write) = 2 cycles			*/
#define B3TT_3				0x000C0000  /* B3 Transition Time (Read to Write) = 3 cycles			*/
#define B3TT_4				0x00000000  /* B3 Transition Time (Read to Write) = 4 cycles			*/
#define B3ST_1				0x00100000  /* B3 Setup Time (AOE to Read/Write) = 1 cycle				*/
#define B3ST_2				0x00200000  /* B3 Setup Time (AOE to Read/Write) = 2 cycles				*/
#define B3ST_3				0x00300000  /* B3 Setup Time (AOE to Read/Write) = 3 cycles				*/
#define B3ST_4				0x00000000  /* B3 Setup Time (AOE to Read/Write) = 4 cycles				*/
#define B3HT_1				0x00400000  /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle				*/
#define B3HT_2				0x00800000  /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles			*/
#define B3HT_3				0x00C00000  /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles			*/
#define B3HT_0				0x00000000  /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles			*/
#define B3RAT_1				0x01000000  /* B3 Read Access Time = 1 cycle						*/
#define B3RAT_2				0x02000000  /* B3 Read Access Time = 2 cycles						*/
#define B3RAT_3				0x03000000  /* B3 Read Access Time = 3 cycles						*/
#define B3RAT_4				0x04000000  /* B3 Read Access Time = 4 cycles						*/
#define B3RAT_5				0x05000000  /* B3 Read Access Time = 5 cycles						*/
#define B3RAT_6				0x06000000  /* B3 Read Access Time = 6 cycles						*/
#define B3RAT_7				0x07000000  /* B3 Read Access Time = 7 cycles						*/
#define B3RAT_8				0x08000000  /* B3 Read Access Time = 8 cycles						*/
#define B3RAT_9				0x09000000  /* B3 Read Access Time = 9 cycles						*/
#define B3RAT_10				0x0A000000  /* B3 Read Access Time = 10 cycles						*/
#define B3RAT_11				0x0B000000  /* B3 Read Access Time = 11 cycles						*/
#define B3RAT_12				0x0C000000  /* B3 Read Access Time = 12 cycles						*/
#define B3RAT_13				0x0D000000  /* B3 Read Access Time = 13 cycles						*/
#define B3RAT_14				0x0E000000  /* B3 Read Access Time = 14 cycles						*/
#define B3RAT_15				0x0F000000  /* B3 Read Access Time = 15 cycles						*/
#define B3WAT_1				0x10000000  /* B3 Write Access Time = 1 cycle						*/
#define B3WAT_2				0x20000000  /* B3 Write Access Time = 2 cycles						*/
#define B3WAT_3				0x30000000  /* B3 Write Access Time = 3 cycles						*/
#define B3WAT_4				0x40000000  /* B3 Write Access Time = 4 cycles						*/
#define B3WAT_5				0x50000000  /* B3 Write Access Time = 5 cycles						*/
#define B3WAT_6				0x60000000  /* B3 Write Access Time = 6 cycles						*/
#define B3WAT_7				0x70000000  /* B3 Write Access Time = 7 cycles						*/
#define B3WAT_8				0x80000000  /* B3 Write Access Time = 8 cycles						*/
#define B3WAT_9				0x90000000  /* B3 Write Access Time = 9 cycles						*/
#define B3WAT_10				0xA0000000  /* B3 Write Access Time = 10 cycles						*/
#define B3WAT_11				0xB0000000  /* B3 Write Access Time = 11 cycles						*/
#define B3WAT_12				0xC0000000  /* B3 Write Access Time = 12 cycles						*/
#define B3WAT_13				0xD0000000  /* B3 Write Access Time = 13 cycles						*/
#define B3WAT_14				0xE0000000  /* B3 Write Access Time = 14 cycles						*/
#define B3WAT_15				0xF0000000  /* B3 Write Access Time = 15 cycles						*/


/*****************************************  SDRAM CONTROLLER MASKS  ***********************************************/

/* EBIU_SDGCTL Masks */
#define CL 					0x0000000C	/* SDRAM CAS latency 								*/
#define PASR 				0x00000030	/* SDRAM partial array self-refresh 					*/
#define TRAS 				0x000003C0	/* SDRAM tRAS in SCLK cycles 							*/
#define TRP 				0x00003800	/* SDRAM tRP in SCLK cycles 							*/
#define TRCD 				0x00030000	/* SDRAM tRCD in SCLK cycles 							*/
#define TWR 				0x00180000	/* SDRAM tWR in SCLK cycles 							*/

#define SCTLE				0x00000001	/* Enable SDRAM Signals								*/
#define CL_2				0x00000008	/* SDRAM CAS Latency = 2 cycles						*/
#define CL_3				0x0000000C	/* SDRAM CAS Latency = 3 cycles						*/
#define PASR_ALL				0x00000000	/* All 4 SDRAM Banks Refreshed In Self-Refresh				*/
#define PASR_B0_B1			0x00000010	/* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh			*/
#define PASR_B0				0x00000020	/* Only SDRAM Bank 0 Is Refreshed In Self-Refresh			*/
#define TRAS_1				0x00000040	/* SDRAM tRAS = 1 cycle								*/
#define TRAS_2				0x00000080	/* SDRAM tRAS = 2 cycles							*/
#define TRAS_3				0x000000C0	/* SDRAM tRAS = 3 cycles							*/
#define TRAS_4				0x00000100	/* SDRAM tRAS = 4 cycles							*/
#define TRAS_5				0x00000140	/* SDRAM tRAS = 5 cycles							*/
#define TRAS_6				0x00000180	/* SDRAM tRAS = 6 cycles							*/
#define TRAS_7				0x000001C0	/* SDRAM tRAS = 7 cycles							*/
#define TRAS_8				0x00000200	/* SDRAM tRAS = 8 cycles							*/
#define TRAS_9				0x00000240	/* SDRAM tRAS = 9 cycles							*/
#define TRAS_10				0x00000280	/* SDRAM tRAS = 10 cycles							*/
#define TRAS_11				0x000002C0	/* SDRAM tRAS = 11 cycles							*/
#define TRAS_12				0x00000300	/* SDRAM tRAS = 12 cycles							*/
#define TRAS_13				0x00000340	/* SDRAM tRAS = 13 cycles							*/
#define TRAS_14				0x00000380	/* SDRAM tRAS = 14 cycles							*/
#define TRAS_15				0x000003C0	/* SDRAM tRAS = 15 cycles							*/
#define TRP_1				0x00000800	/* SDRAM tRP = 1 cycle								*/
#define TRP_2				0x00001000	/* SDRAM tRP = 2 cycles								*/
#define TRP_3				0x00001800	/* SDRAM tRP = 3 cycles								*/
#define TRP_4				0x00002000	/* SDRAM tRP = 4 cycles								*/
#define TRP_5				0x00002800	/* SDRAM tRP = 5 cycles								*/
#define TRP_6				0x00003000	/* SDRAM tRP = 6 cycles								*/
#define TRP_7				0x00003800	/* SDRAM tRP = 7 cycles								*/
#define TRCD_1				0x00008000	/* SDRAM tRCD = 1 cycle								*/
#define TRCD_2				0x00010000	/* SDRAM tRCD = 2 cycles							*/
#define TRCD_3				0x00018000	/* SDRAM tRCD = 3 cycles							*/
#define TRCD_4				0x00020000	/* SDRAM tRCD = 4 cycles							*/
#define TRCD_5				0x00028000	/* SDRAM tRCD = 5 cycles							*/
#define TRCD_6				0x00030000	/* SDRAM tRCD = 6 cycles							*/
#define TRCD_7				0x00038000	/* SDRAM tRCD = 7 cycles							*/
#define TWR_1				0x00080000	/* SDRAM tWR = 1 cycle								*/
#define TWR_2				0x00100000	/* SDRAM tWR = 2 cycles								*/
#define TWR_3				0x00180000	/* SDRAM tWR = 3 cycles								*/
#define PUPSD				0x00200000	/* Power-Up Start Delay (15 SCLK Cycles Delay)				*/
#define PSM					0x00400000	/* Power-Up Sequence (Mode Register Before/After* Refresh)		*/
#define PSS					0x00800000	/* Enable Power-Up Sequence on Next SDRAM Access			*/
#define SRFS				0x01000000	/* Enable SDRAM Self-Refresh Mode						*/
#define EBUFE				0x02000000	/* Enable External Buffering Timing						*/
#define FBBRW				0x04000000	/* Enable Fast Back-To-Back Read To Write					*/
#define EMREN				0x10000000	/* Extended Mode Register Enable						*/
#define TCSR				0x20000000	/* Temp-Compensated Self-Refresh Value (85/45* Deg C)			*/
#define CDDBG				0x40000000	/* Tristate SDRAM Controls During Bus Grant				*/

/* EBIU_SDBCTL Masks */
#define EBE					0x0001	/* Enable SDRAM External Bank							*/
#define EBSZ_16				0x0000	/* SDRAM External Bank Size = 16MB						*/
#define EBSZ_32				0x0002	/* SDRAM External Bank Size = 32MB						*/
#define EBSZ_64				0x0004	/* SDRAM External Bank Size = 64MB						*/
#define EBSZ_128				0x0006	/* SDRAM External Bank Size = 128MB						*/
#define EBCAW_8				0x0000	/* SDRAM External Bank Column Address Width = 8 Bits			*/
#define EBCAW_9				0x0010	/* SDRAM External Bank Column Address Width = 9 Bits			*/
#define EBCAW_10				0x0020	/* SDRAM External Bank Column Address Width = 10 Bits			*/
#define EBCAW_11				0x0030	/* SDRAM External Bank Column Address Width = 11 Bits			*/

#define EBSZ				0x0006	/* SDRAM external bank size 							*/
#define EBCAW				0x0030	/* SDRAM external bank column address width 				*/

/* EBIU_SDSTAT Masks */
#define SDCI				0x0001	/* SDRAM Controller Idle 							*/
#define SDSRA				0x0002	/* SDRAM Self-Refresh Active							*/
#define SDPUA				0x0004	/* SDRAM Power-Up Active 							*/
#define SDRS				0x0008	/* SDRAM Will Power-Up On Next Access					*/
#define SDEASE				0x0010	/* SDRAM EAB Sticky Error Status						*/
#define BGSTAT				0x0020	/* Bus Grant Status								*/


/****************************************  DMA CONTROLLER MASKS  **************************************************/

/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
#define DMAEN				0x0001	/* DMA Channel Enable								*/
#define WNR					0x0002	/* Channel Direction (W/R*)							*/
#define WDSIZE_8				0x0000	/* Transfer Word Size = 8							*/
#define WDSIZE_16				0x0004	/* Transfer Word Size = 16							*/
#define WDSIZE_32				0x0008	/* Transfer Word Size = 32							*/
#define DMA2D				0x0010	/* DMA Mode (2D/1D*)								*/
#define SYNC				0x0020	/* DMA Buffer Clear								*/
#define DI_SEL				0x0040	/* Data Interrupt Timing Select						*/
#define DI_EN				0x0080	/* Data Interrupt Enable							*/
#define NDSIZE_0				0x0000	/* Next Descriptor Size = 0 (Stop/Autobuffer)				*/
#define NDSIZE_1				0x0100	/* Next Descriptor Size = 1							*/
#define NDSIZE_2				0x0200	/* Next Descriptor Size = 2							*/
#define NDSIZE_3				0x0300	/* Next Descriptor Size = 3							*/
#define NDSIZE_4				0x0400	/* Next Descriptor Size = 4							*/
#define NDSIZE_5				0x0500	/* Next Descriptor Size = 5							*/
#define NDSIZE_6				0x0600	/* Next Descriptor Size = 6							*/
#define NDSIZE_7				0x0700	/* Next Descriptor Size = 7							*/
#define NDSIZE_8				0x0800	/* Next Descriptor Size = 8							*/
#define NDSIZE_9				0x0900	/* Next Descriptor Size = 9							*/
#define FLOW_STOP				0x0000	/* Stop Mode									*/
#define FLOW_AUTO				0x1000	/* Autobuffer Mode								*/
#define FLOW_ARRAY			0x4000	/* Descriptor Array Mode							*/
#define FLOW_SMALL			0x6000	/* Small Model Descriptor List Mode						*/
#define FLOW_LARGE			0x7000	/* Large Model Descriptor List Mode						*/

/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
#define CTYPE				0x0040	/* DMA Channel Type Indicator (Memory/Peripheral*)			*/
#define PMAP				0xF000	/* Peripheral Mapped To This Channel					*/
#define PMAP_PPI				0x0000	/* PPI Port DMA									*/
#define PMAP_EMACRX			0x1000	/* Ethernet Receive DMA								*/
#define PMAP_EMACTX			0x2000	/* Ethernet Transmit DMA							*/
#define PMAP_SPORT0RX			0x3000	/* SPORT0 Receive DMA								*/
#define PMAP_SPORT0TX			0x4000	/* SPORT0 Transmit DMA								*/
#define PMAP_RSI				0x4000	/* RSI DMA										*/
#define PMAP_SPORT1RX			0x5000	/* SPORT1 Receive DMA								*/
#define PMAP_SPI1				0x5000	/* SPI1 Transmit/Receive DMA							*/
#define PMAP_SPORT1TX			0x6000	/* SPORT1 Transmit DMA								*/
#define PMAP_SPI				0x7000	/* SPI DMA										*/
#define PMAP_SPI0				0x7000	/* SPI0 DMA										*/
#define PMAP_UART0RX			0x8000	/* UART0 Port Receive DMA							*/
#define PMAP_UART0TX			0x9000	/* UART0 Port Transmit DMA							*/
#define PMAP_UART1RX			0xA000	/* UART1 Port Receive DMA							*/
#define PMAP_UART1TX			0xB000	/* UART1 Port Transmit DMA							*/

/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
#define DMA_DONE				0x0001	/* DMA Completion Interrupt Status						*/
#define DMA_ERR				0x0002	/* DMA Error Interrupt Status							*/
#define DFETCH				0x0004	/* DMA Descriptor Fetch Indicator						*/
#define DMA_RUN				0x0008	/* DMA Channel Running Indicator						*/


/*********************************  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************************************/

/*  PPI_CONTROL Masks */
#define PORT_EN				0x0001	/* PPI Port Enable								*/
#define PORT_DIR				0x0002	/* PPI Port Direction								*/
#define XFR_TYPE				0x000C	/* PPI Transfer Type								*/
#define PORT_CFG				0x0030	/* PPI Port Configuration							*/
#define FLD_SEL				0x0040	/* PPI Active Field Select							*/
#define PACK_EN				0x0080	/* PPI Packing Mode								*/ /* previous versions of defBF532.h erroneously included DMA32 (PPI 32-bit DMA Enable) */
#define SKIP_EN				0x0200	/* PPI Skip Element Enable							*/
#define SKIP_EO				0x0400	/* PPI Skip Even/Odd Elements							*/
#define DLEN_8				0x0000	/* Data Length = 8 Bits								*/
#define DLEN_10				0x0800	/* Data Length = 10 Bits							*/
#define DLEN_11				0x1000	/* Data Length = 11 Bits							*/
#define DLEN_12				0x1800	/* Data Length = 12 Bits							*/
#define DLEN_13				0x2000	/* Data Length = 13 Bits							*/
#define DLEN_14				0x2800	/* Data Length = 14 Bits							*/
#define DLEN_15				0x3000	/* Data Length = 15 Bits							*/
#define DLEN_16				0x3800	/* Data Length = 16 Bits							*/
#define POLC				0x4000	/* PPI Clock Polarity								*/
#define POLS				0x8000	/* PPI Frame Sync Polarity							*/

/* PPI_STATUS Masks */
#define LT_ERR_OVR			0x0100	/* Line Track Overflow Error							*/
#define LT_ERR_UNDR			0x0200	/* Line Track Underflow Error							*/
#define FLD					0x0400	/* Field Indicator								*/
#define FT_ERR				0x0800	/* Frame Track Error								*/
#define OVR					0x1000	/* FIFO Overflow Error								*/
#define UNDR				0x2000	/* FIFO Underrun Error								*/
#define ERR_DET				0x4000	/* Error Detected Indicator							*/
#define ERR_NCOR				0x8000	/* Error Not Corrected Indicator						*/


/***************************************  TWO-WIRE INTERFACE (TWI) MASKS  *****************************************/

/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  ) */
#ifdef _MISRA_RULES
#define CLKLOW(x)				((x) & 0xFFu)/* Periods Clock Is Held Low							*/
#define CLKHI(y)				(((y)&0xFFu)<<0x8)/* Periods Before New Clock Low					*/
#else
#define CLKLOW(x)				((x) & 0xFF)/* Periods Clock Is Held Low							*/
#define CLKHI(y)				(((y)&0xFF)<<0x8)	/* Periods Before New Clock Low					*/
#endif /* _MISRA_RULES */

/* TWI_PRESCALE Masks */
#define PRESCALE				0x007F	/* SCLKs Per Internal Time Reference (10MHz)				*/
#define TWI_ENA				0x0080	/* TWI Enable									*/
#define SCCB				0x0200	/* SCCB Compatibility Enable							*/

/* TWI_SLAVE_CTRL Masks */
#define SEN					0x0001	/* Slave Enable									*/
#define SADD_LEN				0x0002	/* Slave Address Length								*/
#define STDVAL				0x0004	/* Slave Transmit Data Valid							*/
#define NAK					0x0008	/* NAK/ACK* Generated At Conclusion Of Transfer 			*/
#define GEN					0x0010	/* General Call Adrress Matching Enabled					*/

/* TWI_SLAVE_STAT Masks	*/
#define SDIR				0x0001	/* Slave Transfer Direction (Transmit/Receive*)				*/
#define GCALL				0x0002	/* General Call Indicator							*/

/* TWI_MASTER_CTRL Masks */
#define MEN					0x0001	/* Master Mode Enable								*/
#define MADD_LEN				0x0002	/* Master Address Length							*/
#define MDIR				0x0004	/* Master Transmit Direction (RX/TX*)					*/
#define FAST				0x0008	/* Use Fast Mode Timing Specs							*/
#define STOP				0x0010	/* Issue Stop Condition								*/
#define RSTART				0x0020	/* Repeat Start or Stop* At End Of Transfer				*/
#define DCNT				0x3FC0	/* Data Bytes To Transfer							*/
#define SDAOVR				0x4000	/* Serial Data Override								*/
#define SCLOVR				0x8000	/* Serial Clock Override							*/

/* TWI_MASTER_STAT Masks */
#define MPROG				0x0001	/* Master Transfer In Progress						*/
#define LOSTARB				0x0002	/* Lost Arbitration Indicator (Xfer Aborted)				*/
#define ANAK				0x0004	/* Address Not Acknowledged							*/
#define DNAK				0x0008	/* Data Not Acknowledged							*/
#define BUFRDERR				0x0010	/* Buffer Read Error								*/
#define BUFWRERR				0x0020	/* Buffer Write Error								*/
#define SDASEN				0x0040	/* Serial Data Sense								*/
#define SCLSEN				0x0080	/* Serial Clock Sense								*/
#define BUSBUSY				0x0100	/* Bus Busy Indicator								*/

/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
#define SINIT				0x0001	/* Slave Transfer Initiated							*/
#define SCOMP				0x0002	/* Slave Transfer Complete							*/
#define SERR				0x0004	/* Slave Transfer Error								*/
#define SOVF				0x0008	/* Slave Overflow									*/
#define MCOMP				0x0010	/* Master Transfer Complete							*/
#define MERR				0x0020	/* Master Transfer Error							*/
#define XMTSERV				0x0040	/* Transmit FIFO Service							*/
#define RCVSERV				0x0080	/* Receive FIFO Service								*/

/* TWI_FIFO_CTRL Masks */
#define XMTFLUSH				0x0001	/* Transmit Buffer Flush							*/
#define RCVFLUSH				0x0002	/* Receive Buffer Flush								*/
#define XMTINTLEN				0x0004	/* Transmit Buffer Interrupt Length						*/
#define RCVINTLEN				0x0008	/* Receive Buffer Interrupt Length						*/

/* TWI_FIFO_STAT Masks */
#define XMTSTAT				0x0003	/* Transmit FIFO Status								*/
#define XMT_EMPTY				0x0000	/* Transmit FIFO Empty								*/
#define XMT_HALF				0x0001	/* Transmit FIFO Has 1 Byte To Write					*/
#define XMT_FULL				0x0003	/* Transmit FIFO Full (2 Bytes To Write)					*/

#define RCVSTAT				0x000C	/* Receive FIFO Status								*/
#define RCV_EMPTY				0x0000	/* Receive FIFO Empty								*/
#define RCV_HALF				0x0004	/* Receive FIFO Has 1 Byte To Read						*/
#define RCV_FULL				0x000C	/* Receive FIFO Full (2 Bytes To Read)					*/


/*************************************  PIN CONTROL REGISTER MASKS  ***********************************************/

/* PORT_MUX deleted in VisualDSP++ 5.0 Update 3 */


/***********************************  HANDSHAKE DMA (HMDMA) MASKS  ************************************************/

/* HMDMAx_CTL Masks */
#define HMDMAEN				0x0001	/* Enable Handshake DMA 0/1							*/
#define REP					0x0002	/* HMDMA Request Polarity							*/
#define UTE					0x0004	/* Urgency Threshold Enable							*/
#define OIE					0x0010	/* Overflow Interrupt Enable							*/
#define BDIE				0x0020	/* Block Done Interrupt Enable						*/
#define MBDI				0x0040	/* Mask Block Done IRQ If Pending ECNT					*/
#define DRQ					0x0300	/* HMDMA Request Type								*/
#define DRQ_NONE				0x0000	/* No Request									*/
#define DRQ_SINGLE			0x0100	/* Channels Request Single							*/
#define DRQ_MULTI				0x0200	/* Channels Request Multi (Default)						*/
#define DRQ_URGENT			0x0300	/* Channels Request Multi Urgent						*/
#define RBC					0x1000	/* Reload BCNT With IBCNT							*/
#define PS					0x2000	/* HMDMA Pin Status								*/
#define OI					0x4000	/* Overflow Interrupt Generated						*/
#define BDI					0x8000	/* Block Done Interrupt Generated						*/

/* entry addresses of the user-callable Boot ROM functions */
#define _BOOTROM_RESET 				0xEF000000
#define _BOOTROM_FINAL_INIT 			0xEF000002
#define _BOOTROM_DO_MEMORY_DMA 		0xEF000006
#define _BOOTROM_BOOT_DXE_FLASH 		0xEF000008
#define _BOOTROM_BOOT_DXE_SPI 		0xEF00000A
#define _BOOTROM_BOOT_DXE_TWI 		0xEF00000C
#define _BOOTROM_GET_DXE_ADDRESS_FLASH	0xEF000010
#define _BOOTROM_GET_DXE_ADDRESS_SPI 	0xEF000012
#define _BOOTROM_GET_DXE_ADDRESS_TWI 	0xEF000014

/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
#define CKELOW					SCKELOW


/****************************************   COUNTER MASKS    ******************************************************/

/* Bit masks for CNT_CONFIG */
#define CNTE				0x1        /* Counter Enable 									*/
#define nCNTE  				0x0
#define DEBE  				0x2        /* Debounce Enable 								*/
#define nDEBE  				0x0
#define CDGINV  				0x10       /* CDG Pin Polarity Invert 							*/
#define nCDGINV  				0x0
#define CUDINV  				0x20       /* CUD Pin Polarity Invert 							*/
#define nCUDINV  				0x0
#define CZMINV  				0x40       /* CZM Pin Polarity Invert 							*/
#define nCZMINV  				0x0
#define CNTMODE  				0x700      /* Counter Operating Mode 							*/
#define ZMZC  				0x800      /* CZM Zeroes Counter Enable 							*/
#define nZMZC  				0x0
#define BNDMODE  				0x3000     /* Boundary register Mode 							*/
#define INPDIS  				0x8000     /* CUG and CDG Input Disable 							*/
#define nINPDIS  				0x0

/* Bit masks for CNT_IMASK */
#define ICIE				0x1        /* Illegal Gray/Binary Code Interrupt Enable 				*/
#define nICIE  				0x0
#define UCIE  				0x2        /* Up count Interrupt Enable 							*/
#define nUCIE  				0x0
#define DCIE  				0x4        /* Down count Interrupt Enable 						*/
#define nDCIE  				0x0
#define MINCIE  				0x8        /* Min Count Interrupt Enable 							*/
#define nMINCIE  				0x0
#define MAXCIE  				0x10       /* Max Count Interrupt Enable 							*/
#define nMAXCIE  				0x0
#define COV31IE  				0x20       /* Bit 31 Overflow Interrupt Enable 						*/
#define nCOV31IE  			0x0
#define COV15IE  				0x40       /* Bit 15 Overflow Interrupt Enable 						*/
#define nCOV15IE  			0x0
#define CZEROIE  				0x80       /* Count to Zero Interrupt Enable 						*/
#define nCZEROIE  			0x0
#define CZMIE  				0x100      /* CZM Pin Interrupt Enable 							*/
#define nCZMIE 				0x0
#define CZMEIE  				0x200      /* CZM Error Interrupt Enable 							*/
#define nCZMEIE  				0x0
#define CZMZIE  				0x400      /* CZM Zeroes Counter Interrupt Enable 					*/
#define nCZMZIE  				0x0

/* Bit masks for CNT_STATUS */
#define ICII  				0x1        /* Illegal Gray/Binary Code Interrupt Identifier 			*/
#define nICII  				0x0
#define UCII  				0x2        /* Up count Interrupt Identifier 						*/
#define nUCII  				0x0
#define DCII  				0x4        /* Down count Interrupt Identifier 						*/
#define nDCII  				0x0
#define MINCII  				0x8        /* Min Count Interrupt Identifier 						*/
#define nMINCII  				0x0
#define MAXCII  				0x10       /* Max Count Interrupt Identifier 						*/
#define nMAXCII  				0x0
#define COV31II  				0x20       /* Bit 31 Overflow Interrupt Identifier 					*/
#define nCOV31II  			0x0
#define COV15II  				0x40       /* Bit 15 Overflow Interrupt Identifier 					*/
#define nCOV15II  			0x0
#define CZEROII  				0x80       /* Count to Zero Interrupt Identifier 					*/
#define nCZEROII  			0x0
#define CZMII  				0x100      /* CZM Pin Interrupt Identifier 						*/
#define nCZMII  				0x0
#define CZMEII  				0x200      /* CZM Error Interrupt Identifier 						*/
#define nCZMEII  				0x0
#define CZMZII  				0x400      /* CZM Zeroes Counter Interrupt Identifier 				*/
#define nCZMZII  				0x0

/* Bit masks for CNT_COMMAND */
#define W1LCNT  				0xf        /* Load Counter Register 							*/
#define W1LMIN  				0xf0       /* Load Min Register 								*/
#define W1LMAX  				0xf00      /* Load Max Register 								*/
#define W1ZMONCE  			0x1000     /* Enable CZM Clear Counter Once 						*/
#define nW1ZMONCE  			0x0

/* Bit masks for CNT_DEBOUNCE */
#define DPRESCALE				0xf        /* Load Counter Register 							*/


/*************************************  SECURITY REGISTER MASKs  **************************************************/

/* Bit masks for SECURE_SYSSWT */
#define EMUDABL  				0x1        /* Emulation Disable. 								*/
#define nEMUDABL  			0x0
#define RSTDABL  				0x2        /* Reset Disable 									*/
#define nRSTDABL  			0x0
#define L1IDABL  				0x1c       /* L1 Instruction Memory Disable. 						*/
#define L1DADABL  			0xe0       /* L1 Data Bank A Memory Disable. 						*/
#define L1DBDABL  			0x700      /* L1 Data Bank B Memory Disable. 						*/
#define DMA0OVR  				0x800      /* DMA0 Memory Access Override 						*/
#define nDMA0OVR 				0x0
#define DMA1OVR  				0x1000     /* DMA1 Memory Access Override 						*/
#define nDMA1OVR  			0x0
#define EMUOVR  				0x4000     /* Emulation Override 								*/
#define nEMUOVR  				0x0
#define OTPSEN  				0x8000     /* OTP Secrets Enable. 								*/
#define nOTPSEN  				0x0

/* Bit masks for SECURE_CONTROL */
#define SECURE0  				0x1        /* SECURE 0 										*/
#define nSECURE0  			0x0
#define SECURE1  				0x2        /* SECURE 1 										*/
#define nSECURE1  			0x0
#define SECURE2  				0x4        /* SECURE 2 										*/
#define nSECURE2  			0x0
#define SECURE3  				0x8        /* SECURE 3 										*/
#define nSECURE3  			0x0

/* Bit masks for SECURE_STATUS */
#define SECMODE  				0x3        /* Secured Mode Control State 							*/
#define NMI  				0x4        /* Non Maskable Interrupt 							*/
#define nNMI  				0x0
#define AFVALID  				0x8        /* Authentication Firmware Valid 						*/
#define nAFVALID  			0x0
#define AFEXIT  				0x10       /* Authentication Firmware Exit 						*/
#define nAFEXIT  				0x0
#define SECSTAT  				0xe0       /* Secure Status 									*/


/**********************************************  PWM Masks  *******************************************************/

/* Bit masks for PWM_CTRL */
#define PWM_EN				0x1		/* PWM Enable									*/
#define PWM_SYNC_EN  			0X2	 	/* Enable Sync Enable								*/
#define PWM_DBL  				0x4		/* Double Update Mode 								*/
#define PWM_EXTSYNC			0x8		/* External Sync 									*/
#define PWM_SYNCSEL  			0x10		/* External Sync Select								*/
#define PWM_POLARITY			0x20		/* PWM Output Polarity 								*/
#define PWM_SRMODE			0x40		/* PWM SR MODE 									*/
#define PWMTRIPINT_EN			0x80		/* Trip Interrupt Enable 							*/
#define PWMSYNCINT_EN			0x100		/* Sync Interrupt Enable 							*/
#define PWMTRIP_DSBL			0x200	    	/* Trip Input Disable 								*/

/* Bit masks for PWM_STAT */
#define PWM_PHASE				0x1		/* PWM phase 									*/
#define PWM_POL  				0x2		/* PWM polarity 									*/
#define PWM_SR				0x4		/* PWM SR mode 									*/
#define PWM_TRIP				0x8		/* PWM Trip mode 		 							*/
#define PWM_TRIPINT			0x100		/* PWM Trip Interrupt 								*/
#define PWM_SYNCINT			0x200		/* PWM Sync Interrupt								*/

/* Bit masks for PWMGATE Register */

#define CHOPHI				0x100		/* Gate Chopping Enable High Side 						*/
#define CHOPLO				0x200		/* Gate Chopping Enable Low Side 						*/

/* Bit masks for PWMSEG Register */

#define CH_EN  				0x1		/* CH output Enable 								*/
#define CL_EN  				0x2		/* CL output Enable 								*/
#define BH_EN  				0x4		/* BH output Enable 								*/
#define BL_EN  				0x8		/* BL output Enable								*/
#define AH_EN  				0x10		/* AH output Enable 								*/
#define AL_EN  				0x20		/* AL output Enable 								*/
#define CHCL_XOVR  			0x40		/* Channel C output Crossover 						*/
#define BHBL_XOVR  			0x80		/* Channel B output Crossover 						*/
#define AHAL_XOVR  			0x100		/* Channel A output Crossover 						*/

/* Bit masks for PWMLSI Register */
#define PWM_SR_LSI_A			0x1		/* PWM SR Low Side Invert Channel A 					*/
#define PWM_SR_LSI_B			0x2		/* PWM SR Low Side Invert Channel A 					*/
#define PWM_SR_LSI_C			0x4		/* PWM SR Low Side Invert Channel A 					*/

/* Bit masks for PWM_STAT2 Register */
#define PWM_AL				0x1		/* pwm_al output signal for S/W observation 				*/
#define PWM_AH				0x2		/* pwm_ah output signal for S/W observation 				*/
#define PWM_BL				0x4		/* pwm_bl output signal for S/W observation 				*/
#define PWM_BH				0x8		/* pwm_bh output signal for S/W observation 				*/
#define PWM_CL				0x10		/* pwm_cl output signal for S/W observation 				*/
#define PWM_CH				0x20		/* pwm_ch output signal for S/W observation 				*/

#ifdef _MISRA_RULES
#pragma diag(pop)
#endif /* _MISRA_RULES */

#endif /* _DEF_BF51x_H */