/**
@page STM32F072B-Discovery_Demonstration STM32F072B-Discovery demonstration firmware
@verbatim
******************** (C) COPYRIGHT 2016 STMicroelectronics *******************
* @file Demonstration/readme.txt
* @author MCD Application Team
* @brief Description of the STM32F072B-Discovery demonstration firmware
******************************************************************************
*
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
@endverbatim
@par Demo Description
The provided demonstration firmware helps you to discover STM32F072B-DISCOVERY board.
It use the MEMS motion sensor to blink the four LEDs according to the motion direction,
the linear touch sensor blink the four LEDs according to the finger position.
Below you find the sequence to launch the discover demonstration :
- Four LEDs blink
- The gyroscope MEMS sensor (L3GD20): move the board and observe LEDs blinking
according to motion direction.
Right : LED5 is ON.
Left : LED4 is ON.
UP : LED3 is ON.
DOWN : LED6 is ON.
- Touch Sensor Linear (TSL) blink the four LEDs according to the finger position
it can perform in both direction.
Note: - Press user button to swich from sequence to the second one.
@par Directory contents
- Demonstrations/Inc/main.c Main program header file
- Demonstrations/Inc/stm32f0xx_hal_conf.h HAL Configuration file
- Demonstrations/Inc/stm32f0xx_it.h Interrupt handlers header file
- Demonstrations/Inc/tsl_conf.h TSC configuration file
- Demonstrations/Inc/tsl_user.h TSC user configuration and api header file
- Demonstrations/Src/main.c Main program
- Demonstrations/Src/stm32f0xx_hal_msp.c HAL MSP module file
- Demonstrations/Src/stm32f0xx_it.c Interrupt handlers
- Demonstrations/Src/system_stm32f0xx.c STM32F0xx system source file
- Demonstrations/Src/tsl_user.c TSC user configuration and api file
@par Hardware and Software environment
- This Demonstration has been tested with STMicroelectronics STM32F072B-DISCO board
can be easily tailored to any other supported device and development board.
- This Demonstration runs on STM32F072RB devices.
@par How to use it ?
In order to make the program work, you must do the following :
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
*/
chinky
45af88c4ae