修改好WiFi针脚等，正确创建块设备

.config

@@ -44,7 +44,7 @@ CONFIG_RT_USING_DEBUG=y
 CONFIG_RT_DEBUGING_ASSERT=y
 CONFIG_RT_DEBUGING_COLOR=y
 CONFIG_RT_DEBUGING_CONTEXT=y
-# CONFIG_RT_DEBUGING_AUTO_INIT is not set
+CONFIG_RT_DEBUGING_AUTO_INIT=y
 CONFIG_RT_USING_OVERFLOW_CHECK=y
 
 #
@@ -505,7 +505,28 @@ CONFIG_ULOG_BACKEND_USING_CONSOLE=y
 # CONFIG_PKG_USING_WLAN_WICED is not set
 # end of Wiced WiFi
 
-# CONFIG_PKG_USING_RW007 is not set
+CONFIG_PKG_USING_RW007=y
+CONFIG_PKG_RW007_PATH="/packages/iot/WiFi/rw007"
+CONFIG_PKG_USING_RW007_V210=y
+# CONFIG_PKG_USING_RW007_V201 is not set
+# CONFIG_PKG_USING_RW007_V200 is not set
+# CONFIG_PKG_USING_RW007_V111 is not set
+# CONFIG_PKG_USING_RW007_V110 is not set
+# CONFIG_PKG_USING_RW007_V100 is not set
+# CONFIG_PKG_USING_RW007_LATEST_VERSION is not set
+CONFIG_PKG_RW007_VER="v2.1.0"
+# CONFIG_RW007_NOT_USE_EXAMPLE_DRIVERS is not set
+CONFIG_RW007_USING_STM32_DRIVERS=y
+# CONFIG_RW007_USING_BLE is not set
+# CONFIG_RW007_USING_POWERSWITCH_EXAMPLE is not set
+# CONFIG_RW007_USING_SPI_TEST is not set
+CONFIG_RW007_SPI_MAX_HZ=30000000
+CONFIG_RW007_SPI_BUS_NAME="spi2"
+CONFIG_RW007_CS_PIN=90
+CONFIG_RW007_BOOT0_PIN=29
+CONFIG_RW007_BOOT1_PIN=90
+CONFIG_RW007_INT_BUSY_PIN=107
+CONFIG_RW007_RST_PIN=111
 
 #
 # CYW43012 WiFi
@@ -1537,7 +1558,7 @@ CONFIG_BSP_USING_FLASH_FS_AUTO_MOUNT=y
 CONFIG_BSP_USING_FAL=y
 # CONFIG_BSP_USING_BOOTLOADER is not set
 # CONFIG_BSP_USING_EASYFLASH is not set
-# CONFIG_BSP_USING_RW007_WLAN is not set
+CONFIG_BSP_USING_RW007_WLAN=y
 CONFIG_BSP_USING_AHT21=y
 # CONFIG_BSP_USING_AP3216C is not set
 # CONFIG_BSP_USING_ICM20608 is not set

board/ports/drv_filesystem.c

@@ -55,7 +55,8 @@ static int onboard_fal_mount(void)
     extern struct rt_device *fal_blk_device_create(const char *parition_name);
     fal_init();
     /* 在 spi flash 中名为 "filesystem" 的分区上创建一个块设备 */
-    struct rt_device *flash_dev = fal_blk_device_create("font");
+    struct rt_device *flash_dev = fal_blk_device_create(FS_PARTITION_NAME);
+    fal_blk_device_create("font");
     if (flash_dev == NULL)
     {
         LOG_E("Can't create a block device on '%s' partition.", FS_PARTITION_NAME);

rtconfig.h

@@ -29,6 +29,7 @@
 #define RT_DEBUGING_ASSERT
 #define RT_DEBUGING_COLOR
 #define RT_DEBUGING_CONTEXT
+#define RT_DEBUGING_AUTO_INIT
 #define RT_USING_OVERFLOW_CHECK
 
 /* Inter-Thread communication */
@@ -302,6 +303,16 @@
 /* Wiced WiFi */
 
 /* end of Wiced WiFi */
+#define PKG_USING_RW007
+#define PKG_USING_RW007_V210
+#define RW007_USING_STM32_DRIVERS
+#define RW007_SPI_MAX_HZ 30000000
+#define RW007_SPI_BUS_NAME "spi2"
+#define RW007_CS_PIN 90
+#define RW007_BOOT0_PIN 29
+#define RW007_BOOT1_PIN 90
+#define RW007_INT_BUSY_PIN 107
+#define RW007_RST_PIN 111
 
 /* CYW43012 WiFi */
 
@@ -555,6 +566,7 @@
 #define BSP_USING_FLASH_FATFS
 #define BSP_USING_FLASH_FS_AUTO_MOUNT
 #define BSP_USING_FAL
+#define BSP_USING_RW007_WLAN
 #define BSP_USING_AHT21
 /* end of Onboard Peripheral Drivers */