#include <rtthread.h>
#include <rtdevice.h>
#include <board.h>
#include "infrared.h"
#include <drv_gpio.h>

#define DBG_TAG "main"
#define DBG_LVL DBG_LOG
#include <rtdbg.h>
#include <ulog.h>

/* 配置 LED 灯引脚 */
#define PIN_LED_B GET_PIN(F, 11) // PF11 :  LED_B        --> LED
#define PIN_LED_R GET_PIN(F, 12) // PF12 :  LED_R        --> LED


void myir_entry(void *parameter)
{
    rt_kprintf("myir_entry\n");
    unsigned int count = 1;
    rt_int16_t key;
    struct infrared_decoder_data infrared_data;

    /* 选择 NEC 解码器 */
    ir_select_decoder("nec");

    /* 设置 RGB 引脚为输出模式*/
    rt_pin_mode(PIN_LED_R, PIN_MODE_OUTPUT);
    rt_pin_mode(PIN_LED_B, PIN_MODE_OUTPUT);

    rt_pin_write(PIN_LED_R, PIN_HIGH);
    rt_pin_write(PIN_LED_B, PIN_HIGH);

    while (count > 0)
    {
        if (infrared_read("nec", &infrared_data) == RT_EOK)
        {
            /* 读取到红外数据，红灯亮起 */
            rt_pin_write(PIN_LED_R, PIN_LOW);
            LOG_I("RECEIVE OK: addr:0x%02X key:0x%02X repeat:%d", infrared_data.data.nec.addr,
                    infrared_data.data.nec.key, infrared_data.data.nec.repeat);
        }
        rt_thread_mdelay(10);

        /* 熄灭蓝灯 */
        rt_pin_write(PIN_LED_B, PIN_HIGH);
        /* 熄灭红灯 */
        rt_pin_write(PIN_LED_R, PIN_HIGH);
        count++;
        // if( count % 100 == 0)
        // rt_kprintf("count = %d\n", count);
    }
}