红外线遥控器按键值

.config

@@ -270,7 +270,7 @@ CONFIG_RT_WLAN_WORKQUEUE_THREAD_PRIO=15
 # CONFIG_RT_USING_VIRTIO is not set
 CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_KTIME is not set
-# CONFIG_RT_USING_HWTIMER is not set
+CONFIG_RT_USING_HWTIMER=y
 # CONFIG_RT_USING_CHERRYUSB is not set
 # end of Device Drivers
 
@@ -1146,10 +1146,14 @@ CONFIG_NEC_DEVIATION=100
 # end of Select infrared decoder
 
 CONFIG_PKG_USING_DRV_INFRARED=y
-# CONFIG_INFRARED_SEND is not set
+CONFIG_INFRARED_SEND=y
+CONFIG_INFRARED_SEND_PWM="pwm3"
+CONFIG_INFRARED_PWM_DEV_CHANNEL=4
+CONFIG_INFRARED_SEND_HWTIMER="timer13"
+CONFIG_INFRARED_MAX_SEND_SIZE=1000
 CONFIG_INFRARED_RECEIVE=y
-CONFIG_INFRARED_RECEIVE_PIN=17
-CONFIG_INFRARED_RECEIVE_HWTIMER="timer16"
+CONFIG_INFRARED_RECEIVE_PIN=88
+CONFIG_INFRARED_RECEIVE_HWTIMER="timer14"
 # CONFIG_PKG_USING_INFRARED_V010 is not set
 CONFIG_PKG_USING_INFRARED_V011=y
 # CONFIG_PKG_USING_INFRARED_LATEST_VERSION is not set
@@ -1641,7 +1645,10 @@ CONFIG_BSP_USING_UART1=y
 CONFIG_BSP_USING_UART6=y
 # CONFIG_BSP_UART6_RX_USING_DMA is not set
 # CONFIG_BSP_UART6_TX_USING_DMA is not set
-# CONFIG_BSP_USING_TIM is not set
+CONFIG_BSP_USING_TIM=y
+# CONFIG_BSP_USING_TIM11 is not set
+CONFIG_BSP_USING_TIM13=y
+CONFIG_BSP_USING_TIM14=y
 CONFIG_BSP_USING_PWM=y
 # CONFIG_BSP_USING_PWM1 is not set
 # CONFIG_BSP_USING_PWM2 is not set

README.md

@@ -1,4 +1,32 @@
 # My_project
+| 编号（key）| 功能 |
+| :----: | :----: |
+| 0x30| 上 |
+| 0xE8 | 左 |
+| 0xB0 | 下 |
+| 0x68 | 右 |
+| 0xFF | OK |
+| 0x38 | 电源键 |
+| 0xA8 | 静音 |
+| 0x88 | 菜单 |
+| 0x28 | 退出 |
+
+
+# STM32F407 野火指南者开发板 BSP 说明
+
+## 简介
+
+本文档为 RT-Thread 开发团队为 STM32F407 野火指南者开发板提供的 BSP (板级支持包) 说明。
+
+主要内容如下：
+
+- 开发板资源介绍
+- BSP 快速上手
+- BSP 使用说明
+- 注意事项
+- 参考资料
+
+## 开发板介绍
 #### LCD 显示温湿度
 ![LCD温湿度](/my_picture/lcdtemp.jpg)
 左上角是（0，0） →x，↓y

my_error/README.md

@@ -8,7 +8,14 @@
 但
 ![alt text](image.png)
 对照示例0.1.1版什么都不用做，也不会报错什么没定义
-.config/rtconfig.h
+对比.config/rtconfig.h
+但发了红外线也没反应……
+再加回接收、发送
+又是没定义
+对比.config/rtconfig.h
+调整好pin，timer，#define ***timer
+总算可以了
+调整好针脚等可以运行了，但一闪一闪的，估计是线程切换的原因？
 ### GET_PIN(F, 11) 的头文件
 
 ``` c
@@ -17,3 +24,18 @@
 #define PIN_LED_B GET_PIN(F, 11) // PF11 :  LED_B        --> LED
 #define PIN_LED_R GET_PIN(F, 12) // PF12 :  LED_R        --> LED
 ```
+
+### 红外线遥控器按键值
+原来要按两次key才变，搞得还以为昨天找到的都是乱输出的
+
+| 编号（key）| 功能 |
+| :----: | :----: |
+| 0x30| 上 |
+| 0xE8 | 左 |
+| 0xB0 | 下 |
+| 0x68 | 右 |
+| 0xFF | OK |
+| 0x38 | 电源键 |
+| 0xA8 | 静音 |
+| 0x88 | 菜单 |
+| 0x28 | 退出 |

my_pro/myproject.c

@@ -55,7 +55,7 @@ extern void myir_entry(void *parameter);
 void ath_init(void);
 void mqt_init(void);
 int ap3_init(void);
-void irf_init(void);
+void inf_init(void);
 
 
 #define EXAMPLE_TRACE(fmt, ...)                        \
@@ -305,7 +305,7 @@ static void mqtt_example_main(void *parameter)
 
 rt_thread_t MQTT_Thread = RT_NULL;
 rt_thread_t Snake_Thread = RT_NULL;
-rt_thread_t Irfrared_Thread = RT_NULL;
+rt_thread_t Infrared_Thread = RT_NULL;
 
 void ath_init(void)
 {
@@ -361,20 +361,20 @@ MSH_CMD_EXPORT_ALIAS(snk_init, snake, "snake game");
 //     return 0;
 
 // }
-void irf_init(void)
+void inf_init(void)
 {
-    Irfrared_Thread = rt_thread_create("Irfrared_Thread", myir_entry, RT_NULL, THREAD_STACK_SIZE, THREAD_PRIORITY, THREAD_TIMESLICE);
+    Infrared_Thread = rt_thread_create("Infrared_Thread", myir_entry, RT_NULL, THREAD_STACK_SIZE, THREAD_PRIORITY, THREAD_TIMESLICE);
 
-    if (Irfrared_Thread != RT_NULL)
+    if (Infrared_Thread != RT_NULL)
     {
-        rt_thread_startup(Irfrared_Thread);
+        rt_thread_startup(Infrared_Thread);
     }
     else
     {
-        rt_kprintf("Irfrared Thread Create Failed!\n");
+        rt_kprintf("Infrared Thread Create Failed!\n");
     }
 }
-MSH_CMD_EXPORT_ALIAS(irf_init, irf, "Irfrared");
+MSH_CMD_EXPORT_ALIAS(inf_init, inf, "Infrared");
 void my_project(void)
 {
     ath_init();
@@ -383,6 +383,6 @@ void my_project(void)
 
     ap3_init();
 
-    irf_init();
+    inf_init();
 }
 MSH_CMD_EXPORT_ALIAS(my_project, myproject, run my project);

rtconfig.h

@@ -173,6 +173,7 @@
 #define RT_WLAN_WORKQUEUE_THREAD_SIZE 2048
 #define RT_WLAN_WORKQUEUE_THREAD_PRIO 15
 #define RT_USING_PIN
+#define RT_USING_HWTIMER
 /* end of Device Drivers */
 
 /* C/C++ and POSIX layer */
@@ -498,9 +499,14 @@
 #define NEC_DEVIATION 100
 /* end of Select infrared decoder */
 #define PKG_USING_DRV_INFRARED
+#define INFRARED_SEND
+#define INFRARED_SEND_PWM "pwm3"
+#define INFRARED_PWM_DEV_CHANNEL 4
+#define INFRARED_SEND_HWTIMER "timer13"
+#define INFRARED_MAX_SEND_SIZE 1000
 #define INFRARED_RECEIVE
-#define INFRARED_RECEIVE_PIN 17
-#define INFRARED_RECEIVE_HWTIMER "timer16"
+#define INFRARED_RECEIVE_PIN 88
+#define INFRARED_RECEIVE_HWTIMER "timer14"
 #define PKG_USING_INFRARED_V011
 /* end of peripheral libraries and drivers */
 
@@ -617,6 +623,9 @@
 #define BSP_USING_UART
 #define BSP_USING_UART1
 #define BSP_USING_UART6
+#define BSP_USING_TIM
+#define BSP_USING_TIM13
+#define BSP_USING_TIM14
 #define BSP_USING_PWM
 #define BSP_USING_PWM3
 #define BSP_USING_PWM3_CH2