first

libraries/HAL_Drivers/drivers/Kconfig

@@ -0,0 +1,62 @@
+if BSP_USING_USBD
+    config BSP_USBD_TYPE_FS
+        bool
+        # "USB Full Speed (FS) Core"
+    config BSP_USBD_TYPE_HS
+        bool
+        # "USB High Speed (HS) Core"
+
+    config BSP_USBD_SPEED_HS
+        bool
+        # "USB High Speed (HS) Mode"
+    config BSP_USBD_SPEED_HSINFS
+        bool
+        # "USB High Speed (HS) Core in FS mode"
+
+    config BSP_USBD_PHY_EMBEDDED
+        bool
+        # "Using Embedded phy interface"
+    config BSP_USBD_PHY_UTMI
+        bool
+        # "UTMI: USB 2.0 Transceiver Macrocell Interace"
+    config BSP_USBD_PHY_ULPI
+        bool
+        # "ULPI: UTMI+ Low Pin Interface"
+endif
+
+config BSP_USING_CRC
+    bool "Enable CRC (CRC-32 0x04C11DB7 Polynomial)"
+    select RT_USING_HWCRYPTO
+    select RT_HWCRYPTO_USING_CRC
+    # "Crypto device frame dose not support above 8-bits granularity"
+    # "Reserve progress, running well, about 32-bits granularity, such as stm32f1, stm32f4"
+    depends on (SOC_SERIES_STM32L4 || SOC_SERIES_STM32F0 || SOC_SERIES_STM32F7 || SOC_SERIES_STM32H7 || SOC_SERIES_STM32MP1)
+    default n
+
+config BSP_USING_RNG
+    bool "Enable RNG (Random Number Generator)"
+    select RT_USING_HWCRYPTO
+    select RT_HWCRYPTO_USING_RNG
+    depends on (SOC_SERIES_STM32L4 || SOC_SERIES_STM32F4 || SOC_SERIES_STM32F7 || \
+                SOC_SERIES_STM32H7 || SOC_SERIES_STM32MP1)
+    default n
+
+config BSP_USING_HASH
+    bool "Enable HASH (Hash House Harriers)"
+    select RT_USING_HWCRYPTO
+    select RT_HWCRYPTO_USING_HASH
+    depends on (SOC_SERIES_STM32MP1)
+    default n
+
+config BSP_USING_CRYP
+    bool "Enable CRYP (Encrypt And Decrypt Data)"
+    select RT_USING_HWCRYPTO
+    select RT_HWCRYPTO_USING_CRYP
+    depends on (SOC_SERIES_STM32MP1)
+    default n
+
+config BSP_USING_UDID
+    bool "Enable UDID (Unique Device Identifier)"
+    select RT_USING_HWCRYPTO
+    default n
+

libraries/HAL_Drivers/drivers/SConscript

@@ -0,0 +1,135 @@
+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+import os
+
+cwd = GetCurrentDir()
+group = []
+src = []
+path = [cwd]
+
+if GetDepend(['RT_USING_PIN']):
+    src += ['drv_gpio.c']
+
+if GetDepend(['RT_USING_SERIAL']):
+    if GetDepend(['RT_USING_SERIAL_V2']):
+        src += ['drv_usart_v2.c']
+    else:
+        src += ['drv_usart.c']
+
+if GetDepend(['BSP_USING_TIM']):
+    src += ['drv_tim.c']
+
+if GetDepend(['BSP_USING_PWM']):
+    src += ['drv_pwm.c', 'drv_tim.c']
+
+if GetDepend(['RT_USING_SPI']):
+    src += ['drv_spi.c']
+
+if GetDepend(['RT_USING_QSPI']):
+    src += ['drv_qspi.c']
+
+if GetDepend('RT_USING_SPI_BITOPS'):
+    src += ['drv_soft_spi.c']
+
+if GetDepend(['RT_USING_I2C', 'RT_USING_I2C_BITOPS']):
+    if GetDepend('BSP_USING_I2C1') or GetDepend('BSP_USING_I2C2') or GetDepend('BSP_USING_I2C3') or GetDepend('BSP_USING_I2C4'):
+        src += ['drv_soft_i2c.c']
+        
+if GetDepend(['RT_USING_I2C']):
+    if GetDepend('BSP_USING_HARD_I2C1') or GetDepend('BSP_USING_HARD_I2C2') or GetDepend('BSP_USING_HARD_I2C3') or GetDepend('BSP_USING_HARD_I2C4'):
+        src += ['drv_hard_i2c.c']
+
+if GetDepend(['BSP_USING_ETH', 'RT_USING_LWIP']):
+    src += ['drv_eth.c']
+
+if GetDepend(['RT_USING_ADC']):
+    src += ['drv_adc.c']
+
+if GetDepend(['RT_USING_DAC']):
+    src += ['drv_dac.c']
+
+if GetDepend(['RT_USING_CAN']):
+    src += ['drv_can.c']
+
+if GetDepend(['RT_USING_PM', 'SOC_SERIES_STM32L4']):
+    src += ['drv_pm.c']
+    src += ['drv_lptim.c']
+
+if GetDepend('BSP_USING_SDRAM'):
+    src += ['drv_sdram.c']
+
+if GetDepend(['BSP_USING_NAND1']):
+    src += ['drv_nand.c']
+
+if GetDepend('BSP_USING_LCD'):
+    src += ['drv_lcd.c']
+
+if GetDepend('BSP_USING_LCD_MIPI'):
+    src += ['drv_lcd_mipi.c']
+
+if GetDepend('BSP_USING_ONCHIP_RTC'):
+    src += ['drv_rtc.c']
+
+if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32G0']):
+    src += [os.path.join('drv_flash', 'drv_flash_g0.c')]
+
+if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32F0']):
+    src += [os.path.join('drv_flash', 'drv_flash_f0.c')]
+
+if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32F1']):
+    src += [os.path.join('drv_flash', 'drv_flash_f1.c')]
+
+if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32F2']):
+    src += [os.path.join('drv_flash', 'drv_flash_f2.c')]
+
+if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32F4']):
+    src += [os.path.join('drv_flash', 'drv_flash_f4.c')]
+
+if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32F7']):
+    src += [os.path.join('drv_flash', 'drv_flash_f7.c')]
+
+if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32L1']):
+    src += [os.path.join('drv_flash', 'drv_flash_l1.c')]
+
+if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32L4']):
+    src += [os.path.join('drv_flash', 'drv_flash_l4.c')]
+
+if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32H7']):
+    src += [os.path.join('drv_flash', 'drv_flash_h7.c')]
+
+if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32WB']):
+    src += [os.path.join('drv_flash', 'drv_flash_wb.c')]
+
+if GetDepend('RT_USING_HWCRYPTO'):
+    src += ['drv_crypto.c']
+
+if GetDepend(['BSP_USING_WDT']):
+    src += ['drv_wdt.c']
+
+if GetDepend(['BSP_USING_SDIO']):
+    if GetDepend('SOC_SERIES_STM32H7') or GetDepend('SOC_SERIES_STM32F7') or GetDepend('SOC_SERIES_STM32L4') or GetDepend('SOC_SERIES_STM32L5'):
+        src += ['drv_sdmmc.c']
+    else:
+        src += ['drv_sdio.c']
+
+if GetDepend(['BSP_USING_USBD']):
+    src += ['drv_usbd.c']
+
+if GetDepend(['BSP_USING_PULSE_ENCODER']):
+    src += ['drv_pulse_encoder.c']
+
+if GetDepend(['BSP_USING_USBH']):
+    src += ['drv_usbh.c']
+
+if GetDepend(['BSP_USING_TEST']):
+    src += ['drv_test.c']
+
+path += [os.path.join(cwd, 'config')]
+
+if GetDepend('BSP_USING_ON_CHIP_FLASH'):
+    path += [os.path.join(cwd, 'drv_flash')]
+
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path)
+
+Return('group')

libraries/HAL_Drivers/drivers/config/f0/adc_config.h

@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-24     zylx         first version
+ */
+
+#ifndef __ADC_CONFIG_H__
+#define __ADC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_ADC1
+#ifndef ADC1_CONFIG
+#define ADC1_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC1,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_ASYNC_DIV1,          \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = ADC_SCAN_DIRECTION_FORWARD,    \
+       .Init.EOCSelection          = ADC_EOC_SINGLE_CONV,           \
+       .Init.LowPowerAutoWait      = DISABLE,                       \
+       .Init.LowPowerAutoPowerOff  = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.DiscontinuousConvMode = ENABLE,                        \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+       .Init.DMAContinuousRequests = ENABLE,                        \
+       .Init.Overrun               = ADC_OVR_DATA_OVERWRITTEN,      \
+    }
+#endif /* ADC1_CONFIG */
+#endif /* BSP_USING_ADC1 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ADC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f0/dma_config.h

@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-01-05     zylx         first version
+ * 2019-01-08     SummerGift   clean up the code
+ */
+
+#ifndef __DMA_CONFIG_H__
+#define __DMA_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* DMA1 channel1  */
+
+/* DMA1 channel2-3 DMA2 channel1-2 */
+#if defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_DMA_RX_IRQHandler          DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+#define UART1_RX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define UART1_RX_DMA_INSTANCE            DMA1_Channel3
+#define UART1_RX_DMA_IRQ                 DMA1_Ch2_3_DMA2_Ch1_2_IRQn
+#elif defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_TX_IRQHandler       DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+#define SPI1_RX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI1_RX_DMA_INSTANCE            DMA1_Channel2
+#define SPI1_RX_DMA_IRQ                 DMA1_Ch2_3_DMA2_Ch1_2_IRQn
+#endif
+
+#if  defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_RX_TX_IRQHandler       DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
+#define SPI1_TX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI1_TX_DMA_INSTANCE            DMA1_Channel3
+#define SPI1_TX_DMA_IRQ                 DMA1_Ch2_3_DMA2_Ch1_2_IRQn
+#endif
+/* DMA1 channel2-3 DMA2 channel1-2 */
+
+/* DMA1 channel4-7 DMA2 channel3-5 */
+#if defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
+#define UART2_DMA_RX_IRQHandler          DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
+#define UART2_RX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define UART2_RX_DMA_INSTANCE            DMA1_Channel5
+#define UART2_RX_DMA_IRQ                 DMA1_Ch4_7_DMA2_Ch3_5_IRQn
+#endif
+/* DMA1 channel4-7 DMA2 channel3-5 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DMA_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f0/pwm_config.h

@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-24     zylx         first version
+ * 2023-04-08     Wangyuqiang  complete PWM defination
+ */
+
+#ifndef __PWM_CONFIG_H__
+#define __PWM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PWM1
+#define PWM1_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM1,         \
+       .name                    = "pwm1",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM1 */
+
+#ifdef BSP_USING_PWM2
+#define PWM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .name                    = "pwm2",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM2 */
+
+#ifdef BSP_USING_PWM3
+#define PWM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .name                    = "pwm3",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM3 */
+
+#ifdef BSP_USING_PWM4
+#define PWM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .name                    = "pwm4",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM4 */
+
+#ifdef BSP_USING_PWM5
+#define PWM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .name                    = "pwm5",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM5 */
+
+#ifdef BSP_USING_PWM6
+#define PWM6_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM6,         \
+       .name                    = "pwm6",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM6 */
+
+#ifdef BSP_USING_PWM7
+#define PWM7_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM7,         \
+       .name                    = "pwm7",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM7 */
+
+#ifdef BSP_USING_PWM8
+#define PWM8_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM8,         \
+       .name                    = "pwm8",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM8 */
+
+#ifdef BSP_USING_PWM9
+#define PWM9_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM9,         \
+       .name                    = "pwm9",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM9 */
+
+#ifdef BSP_USING_PWM10
+#define PWM10_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM10,        \
+       .name                    = "pwm10",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM10 */
+
+#ifdef BSP_USING_PWM11
+#define PWM11_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM11,        \
+       .name                    = "pwm11",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM11 */
+
+#ifdef BSP_USING_PWM12
+#define PWM12_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM12,        \
+       .name                    = "pwm12",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM12 */
+
+#ifdef BSP_USING_PWM13
+#define PWM13_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM13,        \
+       .name                    = "pwm13",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM13 */
+
+#ifdef BSP_USING_PWM14
+#define PWM14_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM14,        \
+       .name                    = "pwm14",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM14 */
+
+#ifdef BSP_USING_PWM15
+#define PWM15_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM15,        \
+       .name                    = "pwm15",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM15 */
+
+#ifdef BSP_USING_PWM16
+#define PWM16_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM16,        \
+       .name                    = "pwm16",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM16 */
+
+#ifdef BSP_USING_PWM17
+#define PWM17_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM17,        \
+       .name                    = "pwm17",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM17 */
+
+#ifdef BSP_USING_PWM18
+#define PWM18_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM18,        \
+       .name                    = "pwm18",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM18 */
+
+#ifdef BSP_USING_PWM19
+#define PWM19_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM19,        \
+       .name                    = "pwm19",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM19 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PWM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f0/spi_config.h

@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ * 2019-01-05     SummerGift   modify DMA support
+ */
+
+#ifndef __SPI_CONFIG_H__
+#define __SPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SPI1
+#ifndef SPI1_BUS_CONFIG
+#define SPI1_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI1,                           \
+        .bus_name = "spi1",                         \
+        .irq_type = SPI1_IRQn,                      \
+    }
+#endif /* SPI1_BUS_CONFIG */
+#endif /* BSP_USING_SPI1 */
+
+#ifdef BSP_SPI1_TX_USING_DMA
+#ifndef SPI1_TX_DMA_CONFIG
+#define SPI1_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_TX_DMA_RCC,                 \
+        .Instance = SPI1_TX_DMA_INSTANCE,           \
+        .dma_irq = SPI1_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_TX_DMA_CONFIG */
+#endif /* BSP_SPI1_TX_USING_DMA */
+
+#ifdef BSP_SPI1_RX_USING_DMA
+#ifndef SPI1_RX_DMA_CONFIG
+#define SPI1_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_RX_DMA_RCC,                 \
+        .Instance = SPI1_RX_DMA_INSTANCE,           \
+        .dma_irq = SPI1_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_RX_DMA_CONFIG */
+#endif /* BSP_SPI1_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI2
+#ifndef SPI2_BUS_CONFIG
+#define SPI2_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI2,                           \
+        .bus_name = "spi2",                         \
+        .irq_type = SPI2_IRQn,                      \
+    }
+#endif /* SPI2_BUS_CONFIG */
+#endif /* BSP_USING_SPI2 */
+
+#ifdef BSP_SPI2_TX_USING_DMA
+#ifndef SPI2_TX_DMA_CONFIG
+#define SPI2_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc  = SPI2_TX_DMA_RCC,                \
+        .Instance = SPI2_TX_DMA_INSTANCE,           \
+        .dma_irq  = SPI2_TX_DMA_IRQ,                \
+    }
+#endif /* SPI2_TX_DMA_CONFIG */
+#endif /* BSP_SPI2_TX_USING_DMA */
+
+#ifdef BSP_SPI2_RX_USING_DMA
+#ifndef SPI2_RX_DMA_CONFIG
+#define SPI2_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc  = SPI2_RX_DMA_RCC,                \
+        .Instance = SPI2_RX_DMA_INSTANCE,           \
+        .dma_irq  = SPI2_RX_DMA_IRQ,                \
+    }
+#endif /* SPI2_RX_DMA_CONFIG */
+#endif /* BSP_SPI2_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SPI_CONFIG_H__ */
+
+
+

libraries/HAL_Drivers/drivers/config/f0/tim_config.h

@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-24     zylx         first version
+ */
+
+#ifndef __TIM_CONFIG_H__
+#define __TIM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef TIM_DEV_INFO_CONFIG
+#define TIM_DEV_INFO_CONFIG                     \
+    {                                           \
+        .maxfreq = 1000000,                     \
+        .minfreq = 2000,                        \
+        .maxcnt  = 0xFFFF,                      \
+        .cntmode = HWTIMER_CNTMODE_UP,          \
+    }
+#endif /* TIM_DEV_INFO_CONFIG */
+
+#ifdef BSP_USING_TIM7
+#ifndef TIM7_CONFIG
+#define TIM7_CONFIG                                        \
+    {                                                      \
+       .tim_handle.Instance     = TIM7,                    \
+       .tim_irqn                = TIM7_IRQn,               \
+       .name                    = "timer7",                \
+    }
+#endif /* TIM7_CONFIG */
+#endif /* BSP_USING_TIM7 */
+
+#ifdef BSP_USING_TIM14
+#ifndef TIM14_CONFIG
+#define TIM14_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM14,         \
+       .tim_irqn                = TIM14_IRQn,    \
+       .name                    = "timer14",     \
+    }
+#endif /* TIM14_CONFIG */
+#endif /* BSP_USING_TIM14 */
+
+#ifdef BSP_USING_TIM16
+#ifndef TIM16_CONFIG
+#define TIM16_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM16,         \
+       .tim_irqn                = TIM16_IRQn,    \
+       .name                    = "timer16",     \
+    }
+#endif /* TIM16_CONFIG */
+#endif /* BSP_USING_TIM16 */
+
+#ifdef BSP_USING_TIM17
+#ifndef TIM17_CONFIG
+#define TIM17_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM17,         \
+       .tim_irqn                = TIM17_IRQn,    \
+       .name                    = "timer17",     \
+    }
+#endif /* TIM17_CONFIG */
+#endif /* BSP_USING_TIM17 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f0/uart_config.h

@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-10-30     zylx         first version
+ */
+
+#ifndef __UART_CONFIG_H__
+#define __UART_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_USING_UART1)
+#ifndef UART1_CONFIG
+#define UART1_CONFIG                                                \
+    {                                                               \
+        .name = "uart1",                                            \
+        .Instance = USART1,                                         \
+        .irq_type = USART1_IRQn,                                    \
+    }
+#endif /* UART1_CONFIG */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_UART1_RX_USING_DMA)
+#ifndef UART1_DMA_RX_CONFIG
+#define UART1_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART1_RX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART1_RX_DMA_RCC,                               \
+        .dma_irq  = UART1_RX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_RX_CONFIG */
+#endif /* BSP_UART1_RX_USING_DMA */
+
+#if defined(BSP_USING_UART2)
+#ifndef UART2_CONFIG
+#define UART2_CONFIG                                                \
+    {                                                               \
+        .name = "uart2",                                            \
+        .Instance = USART2,                                         \
+        .irq_type = USART2_IRQn,                                    \
+    }
+#endif /* UART2_CONFIG */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_UART2_RX_USING_DMA)
+#ifndef UART2_DMA_RX_CONFIG
+#define UART2_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART2_RX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART2_RX_DMA_RCC,                               \
+        .dma_irq  = UART2_RX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_RX_CONFIG */
+#endif /* BSP_UART2_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __UART_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f1/adc_config.h

@@ -0,0 +1,72 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-07     zylx         first version
+ */
+
+#ifndef __ADC_CONFIG_H__
+#define __ADC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_ADC1
+#ifndef ADC1_CONFIG
+#define ADC1_CONFIG                                                \
+    {                                                              \
+       .Instance                   = ADC1,                         \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,          \
+       .Init.ScanConvMode          = ADC_SCAN_DISABLE,             \
+       .Init.ContinuousConvMode    = DISABLE,                      \
+       .Init.NbrOfConversion       = 1,                            \
+       .Init.DiscontinuousConvMode = DISABLE,                      \
+       .Init.NbrOfDiscConversion   = 1,                            \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,           \
+    }
+#endif /* ADC1_CONFIG */
+#endif /* BSP_USING_ADC1 */
+
+#ifdef BSP_USING_ADC2
+#ifndef ADC2_CONFIG
+#define ADC2_CONFIG                                                \
+    {                                                              \
+       .Instance                   = ADC2,                         \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,          \
+       .Init.ScanConvMode          = ADC_SCAN_DISABLE,             \
+       .Init.ContinuousConvMode    = DISABLE,                      \
+       .Init.NbrOfConversion       = 1,                            \
+       .Init.DiscontinuousConvMode = DISABLE,                      \
+       .Init.NbrOfDiscConversion   = 1,                            \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,           \
+    }
+#endif /* ADC2_CONFIG */
+#endif /* BSP_USING_ADC2 */
+
+#ifdef BSP_USING_ADC3
+#ifndef ADC3_CONFIG
+#define ADC3_CONFIG                                                \
+    {                                                              \
+       .Instance                   = ADC3,                         \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,          \
+       .Init.ScanConvMode          = ADC_SCAN_DISABLE,             \
+       .Init.ContinuousConvMode    = DISABLE,                      \
+       .Init.NbrOfConversion       = 1,                            \
+       .Init.DiscontinuousConvMode = DISABLE,                      \
+       .Init.NbrOfDiscConversion   = 1,                            \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,           \
+    }
+#endif /* ADC3_CONFIG */
+#endif /* BSP_USING_ADC3 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ADC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f1/dma_config.h

@@ -0,0 +1,127 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-01-02     SummerGift   first version
+ * 2019-01-08     SummerGift   clean up the code
+ */
+
+#ifndef __DMA_CONFIG_H__
+#define __DMA_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* DMA1 channel1 */
+/* DMA1 channel2 */
+#if defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_IRQHandler          DMA1_Channel2_IRQHandler
+#define SPI1_RX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI1_RX_DMA_INSTANCE            DMA1_Channel2
+#define SPI1_RX_DMA_IRQ                 DMA1_Channel2_IRQn
+#elif defined(BSP_UART3_TX_USING_DMA) && !defined(UART3_TX_DMA_INSTANCE)
+#define UART3_DMA_TX_IRQHandler         DMA1_Channel2_IRQHandler
+#define UART3_TX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART3_TX_DMA_INSTANCE           DMA1_Channel2
+#define UART3_TX_DMA_IRQ                DMA1_Channel2_IRQn
+#endif
+
+/* DMA1 channel3 */
+#if defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_TX_IRQHandler          DMA1_Channel3_IRQHandler
+#define SPI1_TX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI1_TX_DMA_INSTANCE            DMA1_Channel3
+#define SPI1_TX_DMA_IRQ                 DMA1_Channel3_IRQn
+#elif defined(BSP_UART3_RX_USING_DMA) && !defined(UART3_RX_DMA_INSTANCE)
+#define UART3_DMA_RX_IRQHandler         DMA1_Channel3_IRQHandler
+#define UART3_RX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART3_RX_DMA_INSTANCE           DMA1_Channel3
+#define UART3_RX_DMA_IRQ                DMA1_Channel3_IRQn
+#endif
+
+/* DMA1 channel4 */
+#if defined(BSP_SPI2_RX_USING_DMA) && !defined(SPI2_RX_DMA_INSTANCE)
+#define SPI2_DMA_RX_IRQHandler          DMA1_Channel4_IRQHandler
+#define SPI2_RX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI2_RX_DMA_INSTANCE            DMA1_Channel4
+#define SPI2_RX_DMA_IRQ                 DMA1_Channel4_IRQn
+#elif defined(BSP_UART1_TX_USING_DMA) && !defined(UART1_TX_DMA_INSTANCE)
+#define UART1_DMA_TX_IRQHandler         DMA1_Channel4_IRQHandler
+#define UART1_TX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART1_TX_DMA_INSTANCE           DMA1_Channel4
+#define UART1_TX_DMA_IRQ                DMA1_Channel4_IRQn
+#endif
+
+/* DMA1 channel5 */
+#if defined(BSP_SPI2_TX_USING_DMA) && !defined(SPI2_TX_DMA_INSTANCE)
+#define SPI2_DMA_TX_IRQHandler          DMA1_Channel5_IRQHandler
+#define SPI2_TX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI2_TX_DMA_INSTANCE            DMA1_Channel5
+#define SPI2_TX_DMA_IRQ                 DMA1_Channel5_IRQn
+
+#elif defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_DMA_RX_IRQHandler         DMA1_Channel5_IRQHandler
+#define UART1_RX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART1_RX_DMA_INSTANCE           DMA1_Channel5
+#define UART1_RX_DMA_IRQ                DMA1_Channel5_IRQn
+#endif
+
+/* DMA1 channel6 */
+#if defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
+#define UART2_DMA_RX_IRQHandler         DMA1_Channel6_IRQHandler
+#define UART2_RX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART2_RX_DMA_INSTANCE           DMA1_Channel6
+#define UART2_RX_DMA_IRQ                DMA1_Channel6_IRQn
+#endif
+
+/* DMA1 channel7 */
+#if defined(BSP_UART2_TX_USING_DMA) && !defined(UART2_TX_DMA_INSTANCE)
+#define UART2_DMA_TX_IRQHandler         DMA1_Channel7_IRQHandler
+#define UART2_TX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART2_TX_DMA_INSTANCE           DMA1_Channel7
+#define UART2_TX_DMA_IRQ                DMA1_Channel7_IRQn
+#endif
+
+/* DMA2 channel1 */
+#if defined(BSP_SPI3_RX_USING_DMA) && !defined(SPI3_RX_DMA_INSTANCE)
+#define SPI3_DMA_RX_IRQHandler          DMA2_Channel1_IRQHandler
+#define SPI3_RX_DMA_RCC                 RCC_AHBENR_DMA2EN
+#define SPI3_RX_DMA_INSTANCE            DMA2_Channel1
+#define SPI3_RX_DMA_IRQ                 DMA2_Channel1_IRQn
+#endif
+
+/* DMA2 channel2 */
+#if defined(BSP_SPI3_TX_USING_DMA) && !defined(SPI3_TX_DMA_INSTANCE)
+#define SPI3_DMA_TX_IRQHandler          DMA2_Channel2_IRQHandler
+#define SPI3_TX_DMA_RCC                 RCC_AHBENR_DMA2EN
+#define SPI3_TX_DMA_INSTANCE            DMA2_Channel2
+#define SPI3_TX_DMA_IRQ                 DMA2_Channel2_IRQn
+#endif
+
+/* DMA2 channel3 */
+#if defined(BSP_UART4_RX_USING_DMA) && !defined(UART4_RX_DMA_INSTANCE)
+#define UART4_DMA_RX_IRQHandler         DMA2_Channel3_IRQHandler
+#define UART4_RX_DMA_RCC                RCC_AHBENR_DMA2EN
+#define UART4_RX_DMA_INSTANCE           DMA2_Channel3
+#define UART4_RX_DMA_IRQ                DMA2_Channel3_IRQn
+#endif
+/* DMA2 channel4 */
+/* DMA2 channel5 */
+#if defined(BSP_UART4_TX_USING_DMA) && !defined(UART4_TX_DMA_INSTANCE)
+#define UART4_DMA_TX_IRQHandler         DMA2_Channel4_5_IRQHandler
+#define UART4_TX_DMA_RCC                RCC_AHBENR_DMA2EN
+#define UART4_TX_DMA_INSTANCE           DMA2_Channel5
+#define UART4_TX_DMA_IRQ                DMA2_Channel4_5_IRQn
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DMA_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f1/pulse_encoder_config.h

@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-08-23     balanceTWK   first version
+ */
+
+#ifndef __PULSE_ENCODER_CONFIG_H__
+#define __PULSE_ENCODER_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PULSE_ENCODER1
+#ifndef PULSE_ENCODER1_CONFIG
+#define PULSE_ENCODER1_CONFIG                     \
+    {                                             \
+       .tim_handler.Instance     = TIM1,          \
+       .encoder_irqn             = TIM1_UP_IRQn,  \
+       .name                     = "pulse1"       \
+    }
+#endif /* PULSE_ENCODER1_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER1 */
+
+#ifdef BSP_USING_PULSE_ENCODER2
+#ifndef PULSE_ENCODER2_CONFIG
+#define PULSE_ENCODER2_CONFIG                  \
+    {                                          \
+       .tim_handler.Instance     = TIM2,       \
+       .encoder_irqn             = TIM2_IRQn,  \
+       .name                     = "pulse2"    \
+    }
+#endif /* PULSE_ENCODER2_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER2 */
+
+#ifdef BSP_USING_PULSE_ENCODER3
+#ifndef PULSE_ENCODER3_CONFIG
+#define PULSE_ENCODER3_CONFIG                  \
+    {                                          \
+       .tim_handler.Instance     = TIM3,       \
+       .encoder_irqn             = TIM3_IRQn,  \
+       .name                     = "pulse3"    \
+    }
+#endif /* PULSE_ENCODER3_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER3 */
+
+#ifdef BSP_USING_PULSE_ENCODER4
+#ifndef PULSE_ENCODER4_CONFIG
+#define PULSE_ENCODER4_CONFIG                  \
+    {                                          \
+       .tim_handler.Instance     = TIM4,       \
+       .encoder_irqn             = TIM4_IRQn,  \
+       .name                     = "pulse4"    \
+    }
+#endif /* PULSE_ENCODER4_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER4 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PULSE_ENCODER_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f1/pwm_config.h

@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     zylx         first version
+ * 2023-04-08     Wangyuqiang  complete PWM defination
+ */
+
+#ifndef __PWM_CONFIG_H__
+#define __PWM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PWM1
+#define PWM1_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM1,         \
+       .name                    = "pwm1",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM1 */
+
+#ifdef BSP_USING_PWM2
+#define PWM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .name                    = "pwm2",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM2 */
+
+#ifdef BSP_USING_PWM3
+#define PWM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .name                    = "pwm3",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM3 */
+
+#ifdef BSP_USING_PWM4
+#define PWM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .name                    = "pwm4",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM4 */
+
+#ifdef BSP_USING_PWM5
+#define PWM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .name                    = "pwm5",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM5 */
+
+#ifdef BSP_USING_PWM6
+#define PWM6_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM6,         \
+       .name                    = "pwm6",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM6 */
+
+#ifdef BSP_USING_PWM7
+#define PWM7_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM7,         \
+       .name                    = "pwm7",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM7 */
+
+#ifdef BSP_USING_PWM8
+#define PWM8_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM8,         \
+       .name                    = "pwm8",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM8 */
+
+#ifdef BSP_USING_PWM9
+#define PWM9_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM9,         \
+       .name                    = "pwm9",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM9 */
+
+#ifdef BSP_USING_PWM10
+#define PWM10_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM10,        \
+       .name                    = "pwm10",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM10 */
+
+#ifdef BSP_USING_PWM11
+#define PWM11_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM11,        \
+       .name                    = "pwm11",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM11 */
+
+#ifdef BSP_USING_PWM12
+#define PWM12_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM12,        \
+       .name                    = "pwm12",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM12 */
+
+#ifdef BSP_USING_PWM13
+#define PWM13_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM13,        \
+       .name                    = "pwm13",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM13 */
+
+#ifdef BSP_USING_PWM14
+#define PWM14_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM14,        \
+       .name                    = "pwm14",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM14 */
+
+#ifdef BSP_USING_PWM15
+#define PWM15_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM15,        \
+       .name                    = "pwm15",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM15 */
+
+#ifdef BSP_USING_PWM16
+#define PWM16_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM16,        \
+       .name                    = "pwm16",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM16 */
+
+#ifdef BSP_USING_PWM17
+#define PWM17_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM17,        \
+       .name                    = "pwm17",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM17 */
+
+#ifdef BSP_USING_PWM18
+#define PWM18_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM18,        \
+       .name                    = "pwm18",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM18 */
+
+#ifdef BSP_USING_PWM19
+#define PWM19_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM19,        \
+       .name                    = "pwm19",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM19 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PWM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f1/sdio_config.h

@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     BalanceTWK   first version
+ */
+
+#ifndef __SDIO_CONFIG_H__
+#define __SDIO_CONFIG_H__
+
+#include <rtthread.h>
+#include "stm32f1xx_hal.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SDIO
+#define SDIO_BUS_CONFIG                                  \
+    {                                                    \
+        .Instance = SDIO,                                \
+        .dma_rx.dma_rcc = RCC_AHBENR_DMA2EN,             \
+        .dma_tx.dma_rcc = RCC_AHBENR_DMA2EN,             \
+        .dma_rx.Instance = DMA2_Channel4,                \
+        .dma_rx.dma_irq = DMA2_Channel4_IRQn,            \
+        .dma_tx.Instance = DMA2_Channel4,                \
+        .dma_tx.dma_irq = DMA2_Channel4_IRQn,            \
+    }
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SDIO_CONFIG_H__ */
+
+
+

libraries/HAL_Drivers/drivers/config/f1/spi_config.h

@@ -0,0 +1,127 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ * 2019-01-05     SummerGift   modify DMA support
+ */
+
+#ifndef __SPI_CONFIG_H__
+#define __SPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SPI1
+#ifndef SPI1_BUS_CONFIG
+#define SPI1_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI1,                           \
+        .bus_name = "spi1",                         \
+        .irq_type = SPI1_IRQn,                      \
+    }
+#endif /* SPI1_BUS_CONFIG */
+#endif /* BSP_USING_SPI1 */
+
+#ifdef BSP_SPI1_TX_USING_DMA
+#ifndef SPI1_TX_DMA_CONFIG
+#define SPI1_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_TX_DMA_RCC,                 \
+        .Instance = SPI1_TX_DMA_INSTANCE,           \
+        .dma_irq = SPI1_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_TX_DMA_CONFIG */
+#endif /* BSP_SPI1_TX_USING_DMA */
+
+#ifdef BSP_SPI1_RX_USING_DMA
+#ifndef SPI1_RX_DMA_CONFIG
+#define SPI1_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_RX_DMA_RCC,                 \
+        .Instance = SPI1_RX_DMA_INSTANCE,           \
+        .dma_irq = SPI1_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_RX_DMA_CONFIG */
+#endif /* BSP_SPI1_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI2
+#ifndef SPI2_BUS_CONFIG
+#define SPI2_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI2,                           \
+        .bus_name = "spi2",                         \
+        .irq_type = SPI2_IRQn,                      \
+    }
+#endif /* SPI2_BUS_CONFIG */
+#endif /* BSP_USING_SPI2 */
+
+#ifdef BSP_SPI2_TX_USING_DMA
+#ifndef SPI2_TX_DMA_CONFIG
+#define SPI2_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc  = SPI2_TX_DMA_RCC,                \
+        .Instance = SPI2_TX_DMA_INSTANCE,           \
+        .dma_irq  = SPI2_TX_DMA_IRQ,                \
+    }
+#endif /* SPI2_TX_DMA_CONFIG */
+#endif /* BSP_SPI2_TX_USING_DMA */
+
+#ifdef BSP_SPI2_RX_USING_DMA
+#ifndef SPI2_RX_DMA_CONFIG
+#define SPI2_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc  = SPI2_RX_DMA_RCC,                \
+        .Instance = SPI2_RX_DMA_INSTANCE,           \
+        .dma_irq  = SPI2_RX_DMA_IRQ,                \
+    }
+#endif /* SPI2_RX_DMA_CONFIG */
+#endif /* BSP_SPI2_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI3
+#ifndef SPI3_BUS_CONFIG
+#define SPI3_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI3,                           \
+        .bus_name = "spi3",                         \
+        .irq_type = SPI3_IRQn,                      \
+    }
+#endif /* SPI3_BUS_CONFIG */
+#endif /* BSP_USING_SPI3 */
+
+#ifdef BSP_SPI3_TX_USING_DMA
+#ifndef SPI3_TX_DMA_CONFIG
+#define SPI3_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc  = SPI3_TX_DMA_RCC,                \
+        .Instance = SPI3_TX_DMA_INSTANCE,           \
+        .dma_irq  = SPI3_TX_DMA_IRQ,                \
+    }
+#endif /* SPI3_TX_DMA_CONFIG */
+#endif /* BSP_SPI3_TX_USING_DMA */
+
+#ifdef BSP_SPI3_RX_USING_DMA
+#ifndef SPI3_RX_DMA_CONFIG
+#define SPI3_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc  = SPI3_RX_DMA_RCC,                \
+        .Instance = SPI3_RX_DMA_INSTANCE,           \
+        .dma_irq  = SPI3_RX_DMA_IRQ,                \
+    }
+#endif /* SPI3_RX_DMA_CONFIG */
+#endif /* BSP_SPI3_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SPI_CONFIG_H__ */
+
+
+

libraries/HAL_Drivers/drivers/config/f1/tim_config.h

@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-11     zylx         first version
+ */
+
+#ifndef __TIM_CONFIG_H__
+#define __TIM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef TIM_DEV_INFO_CONFIG
+#define TIM_DEV_INFO_CONFIG                     \
+    {                                           \
+        .maxfreq = 1000000,                     \
+        .minfreq = 2000,                        \
+        .maxcnt  = 0xFFFF,                      \
+        .cntmode = HWTIMER_CNTMODE_UP,          \
+    }
+#endif /* TIM_DEV_INFO_CONFIG */
+
+#ifdef BSP_USING_TIM2
+#ifndef TIM2_CONFIG
+#define TIM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .tim_irqn                = TIM2_IRQn,    \
+       .name                    = "timer2",     \
+    }
+#endif /* TIM2_CONFIG */
+#endif /* BSP_USING_TIM2 */
+
+#ifdef BSP_USING_TIM3
+#ifndef TIM3_CONFIG
+#define TIM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .tim_irqn                = TIM3_IRQn,    \
+       .name                    = "timer3",     \
+    }
+#endif /* TIM3_CONFIG */
+#endif /* BSP_USING_TIM3 */
+
+#ifdef BSP_USING_TIM4
+#ifndef TIM4_CONFIG
+#define TIM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .tim_irqn                = TIM4_IRQn,    \
+       .name                    = "timer4",     \
+    }
+#endif /* TIM4_CONFIG */
+#endif /* BSP_USING_TIM4 */
+
+#ifdef BSP_USING_TIM5
+#ifndef TIM5_CONFIG
+#define TIM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .tim_irqn                = TIM5_IRQn,    \
+       .name                    = "timer5",     \
+    }
+#endif /* TIM5_CONFIG */
+#endif /* BSP_USING_TIM5 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f1/uart_config.h

@@ -0,0 +1,178 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-10-30     BalanceTWK   first version
+ * 2019-01-05     SummerGift   modify DMA support
+ */
+
+#ifndef __UART_CONFIG_H__
+#define __UART_CONFIG_H__
+
+#include <rtthread.h>
+#include "dma_config.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_USING_UART1)
+#ifndef UART1_CONFIG
+#define UART1_CONFIG                                                \
+    {                                                               \
+        .name = "uart1",                                            \
+        .Instance = USART1,                                         \
+        .irq_type = USART1_IRQn,                                    \
+    }
+#endif /* UART1_CONFIG */
+
+#if defined(BSP_UART1_RX_USING_DMA)
+#ifndef UART1_DMA_RX_CONFIG
+#define UART1_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART1_RX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART1_RX_DMA_RCC,                               \
+        .dma_irq  = UART1_RX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_RX_CONFIG */
+#endif /* BSP_UART1_RX_USING_DMA */
+
+#if defined(BSP_UART1_TX_USING_DMA)
+#ifndef UART1_DMA_TX_CONFIG
+#define UART1_DMA_TX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART1_TX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART1_TX_DMA_RCC,                               \
+        .dma_irq  = UART1_TX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_TX_CONFIG */
+#endif /* BSP_UART1_TX_USING_DMA */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_USING_UART2)
+#ifndef UART2_CONFIG
+#define UART2_CONFIG                                                \
+    {                                                               \
+        .name = "uart2",                                            \
+        .Instance = USART2,                                         \
+        .irq_type = USART2_IRQn,                                    \
+    }
+#endif /* UART2_CONFIG */
+
+#if defined(BSP_UART2_RX_USING_DMA)
+#ifndef UART2_DMA_RX_CONFIG
+#define UART2_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART2_RX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART2_RX_DMA_RCC,                               \
+        .dma_irq  = UART2_RX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_RX_CONFIG */
+#endif /* BSP_UART2_RX_USING_DMA */
+
+#if defined(BSP_UART2_TX_USING_DMA)
+#ifndef UART2_DMA_TX_CONFIG
+#define UART2_DMA_TX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART2_TX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART2_TX_DMA_RCC,                               \
+        .dma_irq  = UART2_TX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_TX_CONFIG */
+#endif /* BSP_UART2_TX_USING_DMA */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_USING_UART3)
+#ifndef UART3_CONFIG
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_IRQn,                                    \
+    }
+#endif /* UART3_CONFIG */
+
+#if defined(BSP_UART3_RX_USING_DMA)
+#ifndef UART3_DMA_RX_CONFIG
+#define UART3_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART3_RX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART3_RX_DMA_RCC,                               \
+        .dma_irq  = UART3_RX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_RX_CONFIG */
+#endif /* BSP_UART3_RX_USING_DMA */
+
+#if defined(BSP_UART3_TX_USING_DMA)
+#ifndef UART3_DMA_TX_CONFIG
+#define UART3_DMA_TX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART3_TX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART3_TX_DMA_RCC,                               \
+        .dma_irq  = UART3_TX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_TX_CONFIG */
+#endif /* BSP_UART3_TX_USING_DMA */
+#endif /* BSP_USING_UART3 */
+
+#if defined(BSP_USING_UART4)
+#ifndef UART4_CONFIG
+#define UART4_CONFIG                                                \
+    {                                                               \
+        .name = "uart4",                                            \
+        .Instance = UART4,                                          \
+        .irq_type = UART4_IRQn,                                     \
+    }
+#endif /* UART4_CONFIG */
+
+#if defined(BSP_UART4_RX_USING_DMA)
+#ifndef UART4_DMA_RX_CONFIG
+#define UART4_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART4_RX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART4_RX_DMA_RCC,                               \
+        .dma_irq  = UART4_RX_DMA_IRQ,                               \
+    }
+#endif /* UART4_DMA_RX_CONFIG */
+#endif /* BSP_UART4_RX_USING_DMA */
+
+#if defined(BSP_UART4_TX_USING_DMA)
+#ifndef UART4_DMA_TX_CONFIG
+#define UART4_DMA_TX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART4_TX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART4_TX_DMA_RCC,                               \
+        .dma_irq  = UART4_TX_DMA_IRQ,                               \
+    }
+#endif /* UART4_DMA_TX_CONFIG */
+#endif /* BSP_UART4_TX_USING_DMA */
+#endif /* BSP_USING_UART4 */
+
+#if defined(BSP_USING_UART5)
+#ifndef UART5_CONFIG
+#define UART5_CONFIG                                                \
+    {                                                               \
+        .name = "uart5",                                            \
+        .Instance = UART5,                                          \
+        .irq_type = UART5_IRQn,                                     \
+    }
+#endif /* UART5_CONFIG */
+#endif /* BSP_USING_UART5 */
+
+#if defined(BSP_UART5_RX_USING_DMA)
+#ifndef UART5_DMA_RX_CONFIG
+#define UART5_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = DMA_NOT_AVAILABLE,                              \
+    }
+#endif /* UART5_DMA_RX_CONFIG */
+#endif /* BSP_UART5_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

libraries/HAL_Drivers/drivers/config/f1/usbd_config.h

@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-04-10     ZYH          first version
+ * 2019-07-29     Chinese66    change from f4 to f1
+ */
+#ifndef __USBD_CONFIG_H__
+#define __USBD_CONFIG_H__
+
+#define USBD_IRQ_TYPE        USB_LP_CAN1_RX0_IRQn
+#define USBD_IRQ_HANDLER     USB_LP_CAN1_RX0_IRQHandler
+#define USBD_INSTANCE        USB
+#define USBD_PCD_SPEED       PCD_SPEED_FULL
+#define USBD_PCD_PHY_MODULE  PCD_PHY_EMBEDDED
+
+#ifndef BSP_USB_CONNECT_PIN
+#define BSP_USB_CONNECT_PIN  -1
+#endif
+
+#ifndef BSP_USB_PULL_UP_STATUS
+#define BSP_USB_PULL_UP_STATUS  1
+#endif
+#endif

libraries/HAL_Drivers/drivers/config/f2/adc_config.h

@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-06     zylx         first version
+ */
+
+#ifndef __ADC_CONFIG_H__
+#define __ADC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_ADC1
+#ifndef ADC1_CONFIG
+#define ADC1_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC1,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = DISABLE,                       \
+       .Init.EOCSelection          = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 0,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+    }
+#endif /* ADC1_CONFIG */
+#endif /* BSP_USING_ADC1 */
+
+#ifdef BSP_USING_ADC2
+#ifndef ADC2_CONFIG
+#define ADC2_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC2,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = DISABLE,                       \
+       .Init.EOCSelection          = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 0,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+    }
+#endif /* ADC2_CONFIG */
+#endif /* BSP_USING_ADC2 */
+
+#ifdef BSP_USING_ADC3
+#ifndef ADC3_CONFIG
+#define ADC3_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC3,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = DISABLE,                       \
+       .Init.EOCSelection          = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 0,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+    }
+#endif /* ADC3_CONFIG */
+#endif /* BSP_USING_ADC3 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ADC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f2/dma_config.h

@@ -0,0 +1,171 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-01-02     zylx         first version
+ * 2019-01-08     SummerGift   clean up the code
+ */
+
+#ifndef __DMA_CONFIG_H__
+#define __DMA_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* DMA1 stream0 */
+#if defined(BSP_SPI3_RX_USING_DMA) && !defined(SPI3_RX_DMA_INSTANCE)
+#define SPI3_DMA_RX_IRQHandler           DMA1_Stream0_IRQHandler
+#define SPI3_RX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_RX_DMA_INSTANCE             DMA1_Stream0
+#define SPI3_RX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_RX_DMA_IRQ                  DMA1_Stream0_IRQn
+#elif defined(BSP_UART5_RX_USING_DMA) && !defined(UART5_RX_DMA_INSTANCE)
+#define UART5_DMA_RX_IRQHandler          DMA1_Stream0_IRQHandler
+#define UART5_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART5_RX_DMA_INSTANCE            DMA1_Stream0
+#define UART5_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART5_RX_DMA_IRQ                 DMA1_Stream0_IRQn
+#endif
+
+/* DMA1 stream1 */
+#if defined(BSP_UART3_RX_USING_DMA) && !defined(UART3_RX_DMA_INSTANCE)
+#define UART3_DMA_RX_IRQHandler          DMA1_Stream1_IRQHandler
+#define UART3_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART3_RX_DMA_INSTANCE            DMA1_Stream1
+#define UART3_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART3_RX_DMA_IRQ                 DMA1_Stream1_IRQn
+#endif
+
+/* DMA1 stream2 */
+#if defined(BSP_SPI3_RX_USING_DMA) && !defined(SPI3_RX_DMA_INSTANCE)
+#define SPI3_DMA_RX_IRQHandler           DMA1_Stream2_IRQHandler
+#define SPI3_RX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_RX_DMA_INSTANCE             DMA1_Stream2
+#define SPI3_RX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_RX_DMA_IRQ                  DMA1_Stream2_IRQn
+#elif defined(BSP_UART4_RX_USING_DMA) && !defined(UART4_RX_DMA_INSTANCE)
+#define UART4_DMA_RX_IRQHandler          DMA1_Stream2_IRQHandler
+#define UART4_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART4_RX_DMA_INSTANCE            DMA1_Stream2
+#define UART4_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART4_RX_DMA_IRQ                 DMA1_Stream2_IRQn
+#endif
+
+/* DMA1 stream3 */
+#if defined(BSP_SPI2_RX_USING_DMA) && !defined(SPI2_RX_DMA_INSTANCE)
+#define SPI2_DMA_RX_IRQHandler           DMA1_Stream3_IRQHandler
+#define SPI2_RX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI2_RX_DMA_INSTANCE             DMA1_Stream3
+#define SPI2_RX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI2_RX_DMA_IRQ                  DMA1_Stream3_IRQn
+#endif
+
+/* DMA1 stream4 */
+#if defined(BSP_SPI2_TX_USING_DMA) && !defined(SPI2_TX_DMA_INSTANCE)
+#define SPI2_DMA_TX_IRQHandler           DMA1_Stream4_IRQHandler
+#define SPI2_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI2_TX_DMA_INSTANCE             DMA1_Stream4
+#define SPI2_TX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI2_TX_DMA_IRQ                  DMA1_Stream4_IRQn
+#endif
+
+/* DMA1 stream5 */
+#if defined(BSP_SPI3_TX_USING_DMA) && !defined(SPI3_TX_DMA_INSTANCE)
+#define SPI3_DMA_TX_IRQHandler           DMA1_Stream5_IRQHandler
+#define SPI3_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_TX_DMA_INSTANCE             DMA1_Stream5
+#define SPI3_TX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_TX_DMA_IRQ                  DMA1_Stream5_IRQn
+#elif defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
+#define UART2_DMA_RX_IRQHandler          DMA1_Stream5_IRQHandler
+#define UART2_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART2_RX_DMA_INSTANCE            DMA1_Stream5
+#define UART2_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART2_RX_DMA_IRQ                 DMA1_Stream5_IRQn
+#endif
+
+/* DMA1 stream6 */
+
+/* DMA1 stream7 */
+#if defined(BSP_SPI3_TX_USING_DMA) && !defined(SPI3_TX_DMA_INSTANCE)
+#define SPI3_DMA_TX_IRQHandler           DMA1_Stream7_IRQHandler
+#define SPI3_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_TX_DMA_INSTANCE             DMA1_Stream7
+#define SPI3_TX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_TX_DMA_IRQ                  DMA1_Stream7_IRQn
+#endif
+
+/* DMA2 stream0 */
+#if defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_IRQHandler           DMA2_Stream0_IRQHandler
+#define SPI1_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_RX_DMA_INSTANCE             DMA2_Stream0
+#define SPI1_RX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_RX_DMA_IRQ                  DMA2_Stream0_IRQn
+#endif
+
+/* DMA2 stream1 */
+
+/* DMA2 stream2 */
+#if defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_IRQHandler           DMA2_Stream2_IRQHandler
+#define SPI1_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_RX_DMA_INSTANCE             DMA2_Stream2
+#define SPI1_RX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_RX_DMA_IRQ                  DMA2_Stream2_IRQn
+#elif defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_DMA_RX_IRQHandler         DMA2_Stream2_IRQHandler
+#define UART1_RX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART1_RX_DMA_INSTANCE           DMA2_Stream2
+#define UART1_RX_DMA_CHANNEL            DMA_CHANNEL_4
+#define UART1_RX_DMA_IRQ                DMA2_Stream2_IRQn
+#elif defined(BSP_UART6_RX_USING_DMA) && !defined(UART6_RX_DMA_INSTANCE)
+#define UART6_DMA_RX_IRQHandler         DMA2_Stream2_IRQHandler
+#define UART6_RX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART6_RX_DMA_INSTANCE           DMA2_Stream2
+#define UART6_RX_DMA_CHANNEL            DMA_CHANNEL_5
+#define UART6_RX_DMA_IRQ                DMA2_Stream2_IRQn
+#endif
+/* DMA2 stream3 */
+
+#if defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_TX_IRQHandler           DMA2_Stream3_IRQHandler
+#define SPI1_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_TX_DMA_INSTANCE             DMA2_Stream3
+#define SPI1_TX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_TX_DMA_IRQ                  DMA2_Stream3_IRQn
+#endif
+
+/* DMA2 stream4 */
+
+/* DMA2 stream5 */
+#if defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_TX_IRQHandler           DMA2_Stream5_IRQHandler
+#define SPI1_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_TX_DMA_INSTANCE             DMA2_Stream5
+#define SPI1_TX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_TX_DMA_IRQ                  DMA2_Stream5_IRQn
+#elif defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_DMA_RX_IRQHandler         DMA2_Stream5_IRQHandler
+#define UART1_RX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART1_RX_DMA_INSTANCE           DMA2_Stream5
+#define UART1_RX_DMA_CHANNEL            DMA_CHANNEL_4
+#define UART1_RX_DMA_IRQ                DMA2_Stream5_IRQn
+#endif
+
+/* DMA2 stream6 */
+
+/* DMA2 stream7 */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __DMA_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f2/pwm_config.h

@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     zylx         first version
+ * 2023-04-08     Wangyuqiang  complete PWM defination
+ */
+
+#ifndef __PWM_CONFIG_H__
+#define __PWM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PWM1
+#define PWM1_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM1,         \
+       .name                    = "pwm1",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM1 */
+
+#ifdef BSP_USING_PWM2
+#define PWM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .name                    = "pwm2",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM2 */
+
+#ifdef BSP_USING_PWM3
+#define PWM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .name                    = "pwm3",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM3 */
+
+#ifdef BSP_USING_PWM4
+#define PWM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .name                    = "pwm4",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM4 */
+
+#ifdef BSP_USING_PWM5
+#define PWM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .name                    = "pwm5",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM5 */
+
+#ifdef BSP_USING_PWM6
+#define PWM6_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM6,         \
+       .name                    = "pwm6",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM6 */
+
+#ifdef BSP_USING_PWM7
+#define PWM7_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM7,         \
+       .name                    = "pwm7",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM7 */
+
+#ifdef BSP_USING_PWM8
+#define PWM8_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM8,         \
+       .name                    = "pwm8",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM8 */
+
+#ifdef BSP_USING_PWM9
+#define PWM9_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM9,         \
+       .name                    = "pwm9",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM9 */
+
+#ifdef BSP_USING_PWM10
+#define PWM10_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM10,        \
+       .name                    = "pwm10",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM10 */
+
+#ifdef BSP_USING_PWM11
+#define PWM11_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM11,        \
+       .name                    = "pwm11",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM11 */
+
+#ifdef BSP_USING_PWM12
+#define PWM12_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM12,        \
+       .name                    = "pwm12",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM12 */
+
+#ifdef BSP_USING_PWM13
+#define PWM13_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM13,        \
+       .name                    = "pwm13",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM13 */
+
+#ifdef BSP_USING_PWM14
+#define PWM14_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM14,        \
+       .name                    = "pwm14",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM14 */
+
+#ifdef BSP_USING_PWM15
+#define PWM15_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM15,        \
+       .name                    = "pwm15",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM15 */
+
+#ifdef BSP_USING_PWM16
+#define PWM16_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM16,        \
+       .name                    = "pwm16",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM16 */
+
+#ifdef BSP_USING_PWM17
+#define PWM17_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM17,        \
+       .name                    = "pwm17",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM17 */
+
+#ifdef BSP_USING_PWM18
+#define PWM18_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM18,        \
+       .name                    = "pwm18",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM18 */
+
+#ifdef BSP_USING_PWM19
+#define PWM19_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM19,        \
+       .name                    = "pwm19",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM19 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PWM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f2/sdio_config.h

@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     BalanceTWK   first version
+ */
+
+#ifndef __SDIO_CONFIG_H__
+#define __SDIO_CONFIG_H__
+
+#include <rtthread.h>
+#include "stm32f2xx_hal.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SDIO
+#define SDIO_BUS_CONFIG                                  \
+    {                                                    \
+        .Instance = SDIO,                                \
+        .dma_rx.dma_rcc = RCC_AHB1ENR_DMA2EN,            \
+        .dma_tx.dma_rcc = RCC_AHB1ENR_DMA2EN,            \
+        .dma_rx.Instance = DMA2_Stream3,                 \
+        .dma_rx.channel = DMA_CHANNEL_4,                 \
+        .dma_rx.dma_irq = DMA2_Stream3_IRQn,             \
+        .dma_tx.Instance = DMA2_Stream6,                 \
+        .dma_tx.channel = DMA_CHANNEL_4,                 \
+        .dma_tx.dma_irq = DMA2_Stream6_IRQn,             \
+    }
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SDIO_CONFIG_H__ */
+
+
+

libraries/HAL_Drivers/drivers/config/f2/spi_config.h

@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ * 2019-01-05     SummerGift   modify DMA support
+ */
+
+#ifndef __SPI_CONFIG_H__
+#define __SPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SPI1
+#ifndef SPI1_BUS_CONFIG
+#define SPI1_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI1,                           \
+        .bus_name = "spi1",                         \
+        .irq_type = SPI1_IRQn,                      \
+    }
+#endif /* SPI1_BUS_CONFIG */
+#endif /* BSP_USING_SPI1 */
+
+#ifdef BSP_SPI1_TX_USING_DMA
+#ifndef SPI1_TX_DMA_CONFIG
+#define SPI1_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_TX_DMA_RCC,                 \
+        .Instance = SPI1_TX_DMA_INSTANCE,           \
+        .channel = SPI1_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI1_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_TX_DMA_CONFIG */
+#endif /* BSP_SPI1_TX_USING_DMA */
+
+#ifdef BSP_SPI1_RX_USING_DMA
+#ifndef SPI1_RX_DMA_CONFIG
+#define SPI1_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_RX_DMA_RCC,                 \
+        .Instance = SPI1_RX_DMA_INSTANCE,           \
+        .channel = SPI1_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI1_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_RX_DMA_CONFIG */
+#endif /* BSP_SPI1_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI2
+#ifndef SPI2_BUS_CONFIG
+#define SPI2_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI2,                           \
+        .bus_name = "spi2",                         \
+        .irq_type = SPI2_IRQn,                      \
+    }
+#endif /* SPI2_BUS_CONFIG */
+#endif /* BSP_USING_SPI2 */
+
+#ifdef BSP_SPI2_TX_USING_DMA
+#ifndef SPI2_TX_DMA_CONFIG
+#define SPI2_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI2_TX_DMA_RCC,                 \
+        .Instance = SPI2_TX_DMA_INSTANCE,           \
+        .channel = SPI2_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI2_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI2_TX_DMA_CONFIG */
+#endif /* BSP_SPI2_TX_USING_DMA */
+
+#ifdef BSP_SPI2_RX_USING_DMA
+#ifndef SPI2_RX_DMA_CONFIG
+#define SPI2_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI2_RX_DMA_RCC,                 \
+        .Instance = SPI2_RX_DMA_INSTANCE,           \
+        .channel = SPI2_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI2_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI2_RX_DMA_CONFIG */
+#endif /* BSP_SPI2_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI3
+#ifndef SPI3_BUS_CONFIG
+#define SPI3_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI3,                           \
+        .bus_name = "spi3",                         \
+        .irq_type = SPI3_IRQn,                      \
+    }
+#endif /* SPI3_BUS_CONFIG */
+#endif /* BSP_USING_SPI3 */
+
+#ifdef BSP_SPI3_TX_USING_DMA
+#ifndef SPI3_TX_DMA_CONFIG
+#define SPI3_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI3_TX_DMA_RCC,                 \
+        .Instance = SPI3_TX_DMA_INSTANCE,           \
+        .channel = SPI3_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI3_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI3_TX_DMA_CONFIG */
+#endif /* BSP_SPI3_TX_USING_DMA */
+
+#ifdef BSP_SPI3_RX_USING_DMA
+#ifndef SPI3_RX_DMA_CONFIG
+#define SPI3_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI3_RX_DMA_RCC,                 \
+        .Instance = SPI3_RX_DMA_INSTANCE,           \
+        .channel = SPI3_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI3_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI3_RX_DMA_CONFIG */
+#endif /* BSP_SPI3_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SPI_CONFIG_H__ */
+
+
+

libraries/HAL_Drivers/drivers/config/f2/tim_config.h

@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-11     zylx         first version
+ */
+
+#ifndef __TIM_CONFIG_H__
+#define __TIM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef TIM_DEV_INFO_CONFIG
+#define TIM_DEV_INFO_CONFIG                     \
+    {                                           \
+        .maxfreq = 1000000,                     \
+        .minfreq = 3000,                        \
+        .maxcnt  = 0xFFFF,                      \
+        .cntmode = HWTIMER_CNTMODE_UP,          \
+    }
+#endif /* TIM_DEV_INFO_CONFIG */
+
+#ifdef BSP_USING_TIM2
+#ifndef TIM2_CONFIG
+#define TIM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .tim_irqn                = TIM2_IRQn,    \
+       .name                    = "timer2",     \
+    }
+#endif /* TIM2_CONFIG */
+#endif /* BSP_USING_TIM2 */
+
+#ifdef BSP_USING_TIM3
+#ifndef TIM3_CONFIG
+#define TIM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .tim_irqn                = TIM3_IRQn,    \
+       .name                    = "timer3",     \
+    }
+#endif /* TIM3_CONFIG */
+#endif /* BSP_USING_TIM3 */
+
+#ifdef BSP_USING_TIM4
+#ifndef TIM4_CONFIG
+#define TIM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .tim_irqn                = TIM4_IRQn,    \
+       .name                    = "timer4",     \
+    }
+#endif /* TIM4_CONFIG */
+#endif /* BSP_USING_TIM4 */
+
+#ifdef BSP_USING_TIM5
+#ifndef TIM5_CONFIG
+#define TIM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .tim_irqn                = TIM5_IRQn,    \
+       .name                    = "timer5",     \
+    }
+#endif /* TIM5_CONFIG */
+#endif /* BSP_USING_TIM5 */
+
+#ifdef BSP_USING_TIM7
+#ifndef TIM7_CONFIG
+#define TIM7_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM7,         \
+       .tim_irqn                = TIM7_IRQn,    \
+       .name                    = "timer7",     \
+    }
+#endif /* TIM7_CONFIG */
+#endif /* BSP_USING_TIM7 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f2/uart_config.h

@@ -0,0 +1,235 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-10-30     SummerGift   first version
+ * 2019-01-03     zylx         modify dma support
+ */
+
+#ifndef __UART_CONFIG_H__
+#define __UART_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_USING_UART1)
+#ifndef UART1_CONFIG
+#define UART1_CONFIG                                                \
+    {                                                               \
+        .name = "uart1",                                            \
+        .Instance = USART1,                                         \
+        .irq_type = USART1_IRQn,                                    \
+    }
+#endif /* UART1_CONFIG */
+
+#if defined(BSP_UART1_RX_USING_DMA)
+#ifndef UART1_DMA_RX_CONFIG
+#define UART1_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART1_RX_DMA_INSTANCE,                         \
+        .channel = UART1_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART1_RX_DMA_RCC,                               \
+        .dma_irq = UART1_RX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_RX_CONFIG */
+#endif /* BSP_UART1_RX_USING_DMA */
+
+#if defined(BSP_UART1_TX_USING_DMA)
+#ifndef UART1_DMA_TX_CONFIG
+#define UART1_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART1_TX_DMA_INSTANCE,                         \
+        .channel = UART1_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART1_TX_DMA_RCC,                               \
+        .dma_irq = UART1_TX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_TX_CONFIG */
+#endif /* BSP_UART1_TX_USING_DMA */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_USING_UART2)
+#ifndef UART2_CONFIG
+#define UART2_CONFIG                                                \
+    {                                                               \
+        .name = "uart2",                                            \
+        .Instance = USART2,                                         \
+        .irq_type = USART2_IRQn,                                    \
+    }
+#endif /* UART2_CONFIG */
+
+#if defined(BSP_UART2_RX_USING_DMA)
+#ifndef UART2_DMA_RX_CONFIG
+#define UART2_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART2_RX_DMA_INSTANCE,                         \
+        .channel = UART2_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART2_RX_DMA_RCC,                               \
+        .dma_irq = UART2_RX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_RX_CONFIG */
+#endif /* BSP_UART2_RX_USING_DMA */
+
+#if defined(BSP_UART2_TX_USING_DMA)
+#ifndef UART2_DMA_TX_CONFIG
+#define UART2_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART2_TX_DMA_INSTANCE,                         \
+        .channel = UART2_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART2_TX_DMA_RCC,                               \
+        .dma_irq = UART2_TX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_TX_CONFIG */
+#endif /* BSP_UART2_TX_USING_DMA */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_USING_UART3)
+#ifndef UART3_CONFIG
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_IRQn,                                    \
+    }
+#endif /* UART3_CONFIG */
+
+#if defined(BSP_UART3_RX_USING_DMA)
+#ifndef UART3_DMA_RX_CONFIG
+#define UART3_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART3_RX_DMA_INSTANCE,                         \
+        .channel = UART3_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART3_RX_DMA_RCC,                               \
+        .dma_irq = UART3_RX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_RX_CONFIG */
+#endif /* BSP_UART3_RX_USING_DMA */
+
+#if defined(BSP_UART3_TX_USING_DMA)
+#ifndef UART3_DMA_TX_CONFIG
+#define UART3_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART3_TX_DMA_INSTANCE,                         \
+        .channel = UART3_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART3_TX_DMA_RCC,                               \
+        .dma_irq = UART3_TX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_TX_CONFIG */
+#endif /* BSP_UART3_TX_USING_DMA */
+#endif /* BSP_USING_UART3 */
+
+#if defined(BSP_USING_UART4)
+#ifndef UART4_CONFIG
+#define UART4_CONFIG                                                \
+    {                                                               \
+        .name = "uart4",                                            \
+        .Instance = UART4,                                          \
+        .irq_type = UART4_IRQn,                                     \
+    }
+#endif /* UART4_CONFIG */
+
+#if defined(BSP_UART4_RX_USING_DMA)
+#ifndef UART4_DMA_RX_CONFIG
+#define UART4_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART4_RX_DMA_INSTANCE,                         \
+        .channel = UART4_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART4_RX_DMA_RCC,                               \
+        .dma_irq = UART4_RX_DMA_IRQ,                               \
+    }
+#endif /* UART4_DMA_RX_CONFIG */
+#endif /* BSP_UART4_RX_USING_DMA */
+
+#if defined(BSP_UART4_TX_USING_DMA)
+#ifndef UART4_DMA_TX_CONFIG
+#define UART4_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART4_TX_DMA_INSTANCE,                         \
+        .channel = UART4_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART4_TX_DMA_RCC,                               \
+        .dma_irq = UART4_TX_DMA_IRQ,                               \
+    }
+#endif /* UART4_DMA_TX_CONFIG */
+#endif /* BSP_UART4_RX_USING_DMA */
+#endif /* BSP_USING_UART4 */
+
+#if defined(BSP_USING_UART5)
+#ifndef UART5_CONFIG
+#define UART5_CONFIG                                                \
+    {                                                               \
+        .name = "uart5",                                            \
+        .Instance = UART5,                                          \
+        .irq_type = UART5_IRQn,                                     \
+    }
+#endif /* UART5_CONFIG */
+
+#if defined(BSP_UART5_RX_USING_DMA)
+#ifndef UART5_DMA_RX_CONFIG
+#define UART5_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART5_RX_DMA_INSTANCE,                         \
+        .channel = UART5_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART5_RX_DMA_RCC,                               \
+        .dma_irq = UART5_RX_DMA_IRQ,                               \
+    }
+#endif /* UART5_DMA_RX_CONFIG */
+#endif /* BSP_UART5_RX_USING_DMA */
+
+#if defined(BSP_UART5_TX_USING_DMA)
+#ifndef UART5_DMA_TX_CONFIG
+#define UART5_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART5_TX_DMA_INSTANCE,                         \
+        .channel = UART5_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART5_TX_DMA_RCC,                               \
+        .dma_irq = UART5_TX_DMA_IRQ,                               \
+    }
+#endif /* UART5_DMA_TX_CONFIG */
+#endif /* BSP_UART5_TX_USING_DMA */
+#endif /* BSP_USING_UART5 */
+
+#if defined(BSP_USING_UART6)
+#ifndef UART6_CONFIG
+#define UART6_CONFIG                                                \
+    {                                                               \
+        .name = "uart6",                                            \
+        .Instance = USART6,                                         \
+        .irq_type = USART6_IRQn,                                    \
+    }
+#endif /* UART6_CONFIG */
+
+#if defined(BSP_UART6_RX_USING_DMA)
+#ifndef UART6_DMA_RX_CONFIG
+#define UART6_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART6_RX_DMA_INSTANCE,                         \
+        .channel = UART6_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART6_RX_DMA_RCC,                               \
+        .dma_irq = UART6_RX_DMA_IRQ,                               \
+    }
+#endif /* UART6_DMA_RX_CONFIG */
+#endif /* BSP_UART6_RX_USING_DMA */
+
+#if defined(BSP_UART6_TX_USING_DMA)
+#ifndef UART6_DMA_TX_CONFIG
+#define UART6_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART6_TX_DMA_INSTANCE,                         \
+        .channel = UART6_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART6_TX_DMA_RCC,                               \
+        .dma_irq = UART6_TX_DMA_IRQ,                               \
+    }
+#endif /* UART6_DMA_TX_CONFIG */
+#endif /* BSP_UART6_TX_USING_DMA */
+#endif /* BSP_USING_UART6 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

libraries/HAL_Drivers/drivers/config/f3/dma_config.h

@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-01-02     zylx         first version
+ * 2019-01-08     SummerGift   clean up the code
+ */
+
+#ifndef __DMA_CONFIG_H__
+#define __DMA_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
+#define UART2_DMA_RX_IRQHandler          DMA1_Channel5_IRQHandler
+#define UART2_RX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define UART2_RX_DMA_INSTANCE            DMA1_Channel5
+#define UART2_RX_DMA_CHANNEL             DMA1_Channel5_BASE
+#define UART2_RX_DMA_IRQ                 DMA1_Channel5_IRQn
+#endif
+
+#if defined(BSP_UART2_TX_USING_DMA) && !defined(UART2_TX_DMA_INSTANCE)
+#define UART2_DMA_TX_IRQHandler          DMA1_Channel6_IRQHandler
+#define UART2_TX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define UART2_TX_DMA_INSTANCE            DMA1_Channel6
+#define UART2_TX_DMA_CHANNEL             DMA1_Channel6_BASE
+#define UART2_TX_DMA_IRQ                 DMA1_Channel6_IRQn
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DMA_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f3/pwm_config.h

@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     zylx         first version
+ * 2023-04-08     Wangyuqiang  complete PWM defination
+ */
+
+#ifndef __PWM_CONFIG_H__
+#define __PWM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PWM1
+#define PWM1_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM1,         \
+       .name                    = "pwm1",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM1 */
+
+#ifdef BSP_USING_PWM2
+#define PWM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .name                    = "pwm2",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM2 */
+
+#ifdef BSP_USING_PWM3
+#define PWM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .name                    = "pwm3",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM3 */
+
+#ifdef BSP_USING_PWM4
+#define PWM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .name                    = "pwm4",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM4 */
+
+#ifdef BSP_USING_PWM5
+#define PWM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .name                    = "pwm5",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM5 */
+
+#ifdef BSP_USING_PWM6
+#define PWM6_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM6,         \
+       .name                    = "pwm6",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM6 */
+
+#ifdef BSP_USING_PWM7
+#define PWM7_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM7,         \
+       .name                    = "pwm7",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM7 */
+
+#ifdef BSP_USING_PWM8
+#define PWM8_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM8,         \
+       .name                    = "pwm8",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM8 */
+
+#ifdef BSP_USING_PWM9
+#define PWM9_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM9,         \
+       .name                    = "pwm9",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM9 */
+
+#ifdef BSP_USING_PWM10
+#define PWM10_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM10,        \
+       .name                    = "pwm10",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM10 */
+
+#ifdef BSP_USING_PWM11
+#define PWM11_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM11,        \
+       .name                    = "pwm11",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM11 */
+
+#ifdef BSP_USING_PWM12
+#define PWM12_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM12,        \
+       .name                    = "pwm12",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM12 */
+
+#ifdef BSP_USING_PWM13
+#define PWM13_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM13,        \
+       .name                    = "pwm13",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM13 */
+
+#ifdef BSP_USING_PWM14
+#define PWM14_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM14,        \
+       .name                    = "pwm14",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM14 */
+
+#ifdef BSP_USING_PWM15
+#define PWM15_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM15,        \
+       .name                    = "pwm15",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM15 */
+
+#ifdef BSP_USING_PWM16
+#define PWM16_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM16,        \
+       .name                    = "pwm16",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM16 */
+
+#ifdef BSP_USING_PWM17
+#define PWM17_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM17,        \
+       .name                    = "pwm17",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM17 */
+
+#ifdef BSP_USING_PWM18
+#define PWM18_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM18,        \
+       .name                    = "pwm18",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM18 */
+
+#ifdef BSP_USING_PWM19
+#define PWM19_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM19,        \
+       .name                    = "pwm19",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM19 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PWM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f3/tim_config.h

@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-11     zylx         first version
+ */
+
+#ifndef __TIM_CONFIG_H__
+#define __TIM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef TIM_DEV_INFO_CONFIG
+#define TIM_DEV_INFO_CONFIG                     \
+    {                                           \
+        .maxfreq = 1000000,                     \
+        .minfreq = 3000,                        \
+        .maxcnt  = 0xFFFF,                      \
+        .cntmode = HWTIMER_CNTMODE_UP,          \
+    }
+#endif /* TIM_DEV_INFO_CONFIG */
+
+#ifdef BSP_USING_TIM1
+#ifndef TIM1_CONFIG
+#define TIM1_CONFIG                                         \
+    {                                                       \
+       .tim_handle.Instance     = TIM1,                     \
+       .tim_irqn                = TIM1_IRQn,                \
+       .name                    = "timer1",                 \
+    }
+#endif /* TIM1_CONFIG */
+#endif /* BSP_USING_TIM1 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f3/uart_config.h

@@ -0,0 +1,130 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-10-30     SummerGift   first version
+ * 2019-01-03     zylx         modify dma support
+ */
+
+#ifndef __UART_CONFIG_H__
+#define __UART_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_USING_UART1)
+#ifndef UART1_CONFIG
+#define UART1_CONFIG                                                \
+    {                                                               \
+        .name = "uart1",                                            \
+        .Instance = USART1,                                         \
+        .irq_type = USART1_IRQn,                                    \
+    }
+#endif /* UART1_CONFIG */
+
+#if defined(BSP_UART1_RX_USING_DMA)
+#ifndef UART1_DMA_RX_CONFIG
+#define UART1_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART1_RX_DMA_INSTANCE,                         \
+        .channel = UART1_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART1_RX_DMA_RCC,                               \
+        .dma_irq = UART1_RX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_RX_CONFIG */
+#endif /* BSP_UART1_RX_USING_DMA */
+
+#if defined(BSP_UART1_TX_USING_DMA)
+#ifndef UART1_DMA_TX_CONFIG
+#define UART1_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART1_TX_DMA_INSTANCE,                         \
+        .channel = UART1_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART1_TX_DMA_RCC,                               \
+        .dma_irq = UART1_TX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_TX_CONFIG */
+#endif /* BSP_UART1_TX_USING_DMA */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_USING_UART2)
+#ifndef UART2_CONFIG
+#define UART2_CONFIG                                                \
+    {                                                               \
+        .name = "uart2",                                            \
+        .Instance = USART2,                                         \
+        .irq_type = USART2_IRQn,                                    \
+    }
+#endif /* UART2_CONFIG */
+
+#if defined(BSP_UART2_RX_USING_DMA)
+#ifndef UART2_DMA_RX_CONFIG
+#define UART2_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART2_RX_DMA_INSTANCE,                         \
+        .channel = UART2_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART2_RX_DMA_RCC,                               \
+        .dma_irq = UART2_RX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_RX_CONFIG */
+#endif /* BSP_UART2_RX_USING_DMA */
+
+#if defined(BSP_UART2_TX_USING_DMA)
+#ifndef UART2_DMA_TX_CONFIG
+#define UART2_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART2_TX_DMA_INSTANCE,                         \
+        .channel = UART2_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART2_TX_DMA_RCC,                               \
+        .dma_irq = UART2_TX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_TX_CONFIG */
+#endif /* BSP_UART2_TX_USING_DMA */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_USING_UART3)
+#ifndef UART3_CONFIG
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_IRQn,                                    \
+    }
+#endif /* UART3_CONFIG */
+
+#if defined(BSP_UART3_RX_USING_DMA)
+#ifndef UART3_DMA_RX_CONFIG
+#define UART3_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART3_RX_DMA_INSTANCE,                         \
+        .channel = UART3_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART3_RX_DMA_RCC,                               \
+        .dma_irq = UART3_RX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_RX_CONFIG */
+#endif /* BSP_UART3_RX_USING_DMA */
+
+#if defined(BSP_UART3_TX_USING_DMA)
+#ifndef UART3_DMA_TX_CONFIG
+#define UART3_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART3_TX_DMA_INSTANCE,                         \
+        .channel = UART3_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART3_TX_DMA_RCC,                               \
+        .dma_irq = UART3_TX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_TX_CONFIG */
+#endif /* BSP_UART3_TX_USING_DMA */
+#endif /* BSP_USING_UART3 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

libraries/HAL_Drivers/drivers/config/f4/adc_config.h

@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-06     zylx         first version
+ */
+
+#ifndef __ADC_CONFIG_H__
+#define __ADC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_ADC1
+#ifndef ADC1_CONFIG
+#define ADC1_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC1,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = DISABLE,                       \
+       .Init.EOCSelection          = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 0,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+    }
+#endif /* ADC1_CONFIG */
+#endif /* BSP_USING_ADC1 */
+
+#ifdef BSP_USING_ADC2
+#ifndef ADC2_CONFIG
+#define ADC2_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC2,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = DISABLE,                       \
+       .Init.EOCSelection          = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 0,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+    }
+#endif /* ADC2_CONFIG */
+#endif /* BSP_USING_ADC2 */
+
+#ifdef BSP_USING_ADC3
+#ifndef ADC3_CONFIG
+#define ADC3_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC3,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = DISABLE,                       \
+       .Init.EOCSelection          = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 0,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+    }
+#endif /* ADC3_CONFIG */
+#endif /* BSP_USING_ADC3 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ADC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f4/dac_config.h

@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-06-16     thread-liu   first version
+ */
+
+#ifndef __DAC_CONFIG_H__
+#define __DAC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_DAC1
+#ifndef DAC1_CONFIG
+#define DAC1_CONFIG                                                    \
+    {                                                                  \
+       .Instance                      = DAC1,                          \
+    }
+#endif /* DAC2_CONFIG */
+#endif /* BSP_USING_DAC2 */
+
+#ifdef BSP_USING_DAC2
+#ifndef DAC2_CONFIG
+#define DAC2_CONFIG                                                    \
+    {                                                                  \
+       .Instance                      = DAC2,                          \
+    }
+#endif /* DAC2_CONFIG */
+#endif /* BSP_USING_DAC2 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DAC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f4/dma_config.h

@@ -0,0 +1,464 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-01-02     zylx         first version
+ * 2019-01-08     SummerGift   clean up the code
+ */
+
+#ifndef __DMA_CONFIG_H__
+#define __DMA_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* DMA1 stream0 */
+#if defined(BSP_SPI3_RX_USING_DMA) && !defined(SPI3_RX_DMA_INSTANCE)
+#define SPI3_DMA_RX_IRQHandler           DMA1_Stream0_IRQHandler
+#define SPI3_RX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_RX_DMA_INSTANCE             DMA1_Stream0
+#define SPI3_RX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_RX_DMA_IRQ                  DMA1_Stream0_IRQn
+#elif defined(BSP_I2C1_RX_USING_DMA) && !defined(I2C1_RX_DMA_INSTANCE)
+#define I2C1_DMA_RX_IRQHandler          DMA1_Stream0_IRQHandler
+#define I2C1_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define I2C1_RX_DMA_INSTANCE            DMA1_Stream0
+#define I2C1_RX_DMA_CHANNEL             DMA_CHANNEL_1
+#define I2C1_RX_DMA_IRQ                 DMA1_Stream0_IRQn
+#elif defined(BSP_UART5_RX_USING_DMA) && !defined(UART5_RX_DMA_INSTANCE)
+#define UART5_DMA_RX_IRQHandler          DMA1_Stream0_IRQHandler
+#define UART5_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART5_RX_DMA_INSTANCE            DMA1_Stream0
+#define UART5_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART5_RX_DMA_IRQ                 DMA1_Stream0_IRQn
+#elif defined(BSP_UART8_TX_USING_DMA) && !defined(UART8_TX_DMA_INSTANCE)
+#define UART8_DMA_TX_IRQHandler          DMA1_Stream0_IRQHandler
+#define UART8_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART8_TX_DMA_INSTANCE            DMA1_Stream0
+#define UART8_TX_DMA_CHANNEL             DMA_CHANNEL_5
+#define UART8_TX_DMA_IRQ                 DMA1_Stream0_IRQn
+#endif
+
+/* DMA1 stream1 */
+#if defined(BSP_UART3_RX_USING_DMA) && !defined(UART3_RX_DMA_INSTANCE)
+#define UART3_DMA_RX_IRQHandler          DMA1_Stream1_IRQHandler
+#define UART3_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART3_RX_DMA_INSTANCE            DMA1_Stream1
+#define UART3_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART3_RX_DMA_IRQ                 DMA1_Stream1_IRQn
+#elif defined(BSP_UART7_TX_USING_DMA) && !defined(UART7_TX_DMA_INSTANCE)
+#define UART7_DMA_TX_IRQHandler          DMA1_Stream1_IRQHandler
+#define UART7_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART7_TX_DMA_INSTANCE            DMA1_Stream1
+#define UART7_TX_DMA_CHANNEL             DMA_CHANNEL_5
+#define UART7_TX_DMA_IRQ                 DMA1_Stream1_IRQn
+#endif
+
+/* DMA1 stream2 */
+#if defined(BSP_SPI3_RX_USING_DMA) && !defined(SPI3_RX_DMA_INSTANCE)
+#define SPI3_DMA_RX_IRQHandler           DMA1_Stream2_IRQHandler
+#define SPI3_RX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_RX_DMA_INSTANCE             DMA1_Stream2
+#define SPI3_RX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_RX_DMA_IRQ                  DMA1_Stream2_IRQn
+#elif defined(BSP_I2C3_RX_USING_DMA) && !defined(I2C3_RX_DMA_INSTANCE)
+#define I2C3_DMA_RX_IRQHandler          DMA1_Stream2_IRQHandler
+#define I2C3_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define I2C3_RX_DMA_INSTANCE            DMA1_Stream2
+#define I2C3_RX_DMA_CHANNEL             DMA_CHANNEL_3
+#define I2C3_RX_DMA_IRQ                 DMA1_Stream2_IRQn
+#elif defined(BSP_UART4_RX_USING_DMA) && !defined(UART4_RX_DMA_INSTANCE)
+#define UART4_DMA_RX_IRQHandler          DMA1_Stream2_IRQHandler
+#define UART4_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART4_RX_DMA_INSTANCE            DMA1_Stream2
+#define UART4_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART4_RX_DMA_IRQ                 DMA1_Stream2_IRQn
+#elif defined(BSP_I2C2_RX_USING_DMA) && !defined(I2C2_RX_DMA_INSTANCE)
+#define I2C2_DMA_RX_IRQHandler          DMA1_Stream2_IRQHandler
+#define I2C2_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define I2C2_RX_DMA_INSTANCE            DMA1_Stream2
+#define I2C2_RX_DMA_CHANNEL             DMA_CHANNEL_7
+#define I2C2_RX_DMA_IRQ                 DMA1_Stream2_IRQn
+#endif
+
+/* DMA1 stream3 */
+#if defined(BSP_SPI2_RX_USING_DMA) && !defined(SPI2_RX_DMA_INSTANCE)
+#define SPI2_DMA_RX_IRQHandler           DMA1_Stream3_IRQHandler
+#define SPI2_RX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI2_RX_DMA_INSTANCE             DMA1_Stream3
+#define SPI2_RX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI2_RX_DMA_IRQ                  DMA1_Stream3_IRQn
+#elif defined(BSP_UART3_TX_USING_DMA) && !defined(UART3_TX_DMA_INSTANCE)
+#define UART3_DMA_TX_IRQHandler          DMA1_Stream3_IRQHandler
+#define UART3_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART3_TX_DMA_INSTANCE            DMA1_Stream3
+#define UART3_TX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART3_TX_DMA_IRQ                 DMA1_Stream3_IRQn
+#elif defined(BSP_UART7_RX_USING_DMA) && !defined(UART7_RX_DMA_INSTANCE)
+#define UART7_DMA_RX_IRQHandler          DMA1_Stream3_IRQHandler
+#define UART7_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART7_RX_DMA_INSTANCE            DMA1_Stream3
+#define UART7_RX_DMA_CHANNEL             DMA_CHANNEL_5
+#define UART7_RX_DMA_IRQ                 DMA1_Stream3_IRQn
+#elif defined(BSP_I2C2_RX_USING_DMA) && !defined(I2C2_RX_DMA_INSTANCE)
+#define I2C2_DMA_RX_IRQHandler          DMA1_Stream3_IRQHandler
+#define I2C2_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define I2C2_RX_DMA_INSTANCE            DMA1_Stream3
+#define I2C2_RX_DMA_CHANNEL             DMA_CHANNEL_7
+#define I2C2_RX_DMA_IRQ                 DMA1_Stream3_IRQn
+#endif
+
+/* DMA1 stream4 */
+#if defined(BSP_SPI2_TX_USING_DMA) && !defined(SPI2_TX_DMA_INSTANCE)
+#define SPI2_DMA_TX_IRQHandler           DMA1_Stream4_IRQHandler
+#define SPI2_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI2_TX_DMA_INSTANCE             DMA1_Stream4
+#define SPI2_TX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI2_TX_DMA_IRQ                  DMA1_Stream4_IRQn
+#elif defined(BSP_I2C3_TX_USING_DMA) && !defined(I2C3_TX_DMA_INSTANCE)
+#define I2C3_DMA_TX_IRQHandler          DMA1_Stream4_IRQHandler
+#define I2C3_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define I2C3_TX_DMA_INSTANCE            DMA1_Stream4
+#define I2C3_TX_DMA_CHANNEL             DMA_CHANNEL_3
+#define I2C3_TX_DMA_IRQ                 DMA1_Stream4_IRQn
+#elif defined(BSP_UART4_TX_USING_DMA) && !defined(UART4_TX_DMA_INSTANCE)
+#define UART4_DMA_TX_IRQHandler          DMA1_Stream4_IRQHandler
+#define UART4_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART4_TX_DMA_INSTANCE            DMA1_Stream4
+#define UART4_TX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART4_TX_DMA_IRQ                 DMA1_Stream4_IRQn
+#elif defined(BSP_UART3_TX_USING_DMA) && !defined(UART3_TX_DMA_INSTANCE)
+#define UART3_DMA_TX_IRQHandler          DMA1_Stream4_IRQHandler
+#define UART3_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART3_TX_DMA_INSTANCE            DMA1_Stream4
+#define UART3_TX_DMA_CHANNEL             DMA_CHANNEL_7
+#define UART3_TX_DMA_IRQ                 DMA1_Stream4_IRQn
+#endif
+
+/* DMA1 stream5 */
+#if defined(BSP_SPI3_TX_USING_DMA) && !defined(SPI3_TX_DMA_INSTANCE)
+#define SPI3_DMA_TX_IRQHandler           DMA1_Stream5_IRQHandler
+#define SPI3_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_TX_DMA_INSTANCE             DMA1_Stream5
+#define SPI3_TX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_TX_DMA_IRQ                  DMA1_Stream5_IRQn
+#elif defined(BSP_I2C1_RX_USING_DMA) && !defined(I2C1_RX_DMA_INSTANCE)
+#define I2C1_DMA_RX_IRQHandler          DMA1_Stream5_IRQHandler
+#define I2C1_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define I2C1_RX_DMA_INSTANCE            DMA1_Stream5
+#define I2C1_RX_DMA_CHANNEL             DMA_CHANNEL_1
+#define I2C1_RX_DMA_IRQ                 DMA1_Stream5_IRQn
+#elif defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
+#define UART2_DMA_RX_IRQHandler          DMA1_Stream5_IRQHandler
+#define UART2_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART2_RX_DMA_INSTANCE            DMA1_Stream5
+#define UART2_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART2_RX_DMA_IRQ                 DMA1_Stream5_IRQn
+#endif
+
+/* DMA1 stream6 */
+#if defined(BSP_I2C1_TX_USING_DMA) && !defined(I2C1_TX_DMA_INSTANCE)
+#define I2C1_DMA_TX_IRQHandler          DMA1_Stream6_IRQHandler
+#define I2C1_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define I2C1_TX_DMA_INSTANCE            DMA1_Stream6
+#define I2C1_TX_DMA_CHANNEL             DMA_CHANNEL_1
+#define I2C1_TX_DMA_IRQ                 DMA1_Stream6_IRQn
+#elif defined(BSP_UART2_TX_USING_DMA) && !defined(UART2_TX_DMA_INSTANCE)
+#define UART2_DMA_TX_IRQHandler          DMA1_Stream6_IRQHandler
+#define UART2_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART2_TX_DMA_INSTANCE            DMA1_Stream6
+#define UART2_TX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART2_TX_DMA_IRQ                 DMA1_Stream6_IRQn
+#elif defined(BSP_UART8_RX_USING_DMA) && !defined(UART8_RX_DMA_INSTANCE)
+#define UART8_DMA_RX_IRQHandler          DMA1_Stream6_IRQHandler
+#define UART8_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART8_RX_DMA_INSTANCE            DMA1_Stream6
+#define UART8_RX_DMA_CHANNEL             DMA_CHANNEL_5
+#define UART8_RX_DMA_IRQ                 DMA1_Stream6_IRQn
+#endif
+
+/* DMA1 stream7 */
+#if defined(BSP_SPI3_TX_USING_DMA) && !defined(SPI3_TX_DMA_INSTANCE)
+#define SPI3_DMA_TX_IRQHandler           DMA1_Stream7_IRQHandler
+#define SPI3_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_TX_DMA_INSTANCE             DMA1_Stream7
+#define SPI3_TX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_TX_DMA_IRQ                  DMA1_Stream7_IRQn
+#elif defined(BSP_I2C1_TX_USING_DMA) && !defined(I2C1_TX_DMA_INSTANCE)
+#define I2C1_DMA_TX_IRQHandler          DMA1_Stream7_IRQHandler
+#define I2C1_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define I2C1_TX_DMA_INSTANCE            DMA1_Stream7
+#define I2C1_TX_DMA_CHANNEL             DMA_CHANNEL_1
+#define I2C1_TX_DMA_IRQ                 DMA1_Stream7_IRQn
+#elif defined(BSP_UART5_TX_USING_DMA) && !defined(UART5_TX_DMA_INSTANCE)
+#define UART5_DMA_TX_IRQHandler          DMA1_Stream7_IRQHandler
+#define UART5_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART5_TX_DMA_INSTANCE            DMA1_Stream7
+#define UART5_TX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART5_TX_DMA_IRQ                 DMA1_Stream7_IRQn
+#elif defined(BSP_I2C2_TX_USING_DMA) && !defined(I2C2_TX_DMA_INSTANCE)
+#define I2C2_DMA_TX_IRQHandler          DMA1_Stream7_IRQHandler
+#define I2C2_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define I2C2_TX_DMA_INSTANCE            DMA1_Stream7
+#define I2C2_TX_DMA_CHANNEL             DMA_CHANNEL_7
+#define I2C2_TX_DMA_IRQ                 DMA1_Stream7_IRQn
+#endif
+
+/* DMA2 stream0 */
+#if defined(BSP_ADC1_USING_DMA) && !defined(ADC1_DMA_INSTANCE)
+#define ADC1_DMA_IRQHandler           DMA2_Stream0_IRQHandler
+#define ADC1_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define ADC1_DMA_INSTANCE             DMA2_Stream0
+#define ADC1_DMA_CHANNEL              DMA_CHANNEL_0
+#define ADC1_DMA_IRQ                  DMA2_Stream0_IRQn
+#elif defined(BSP_ADC3_USING_DMA) && !defined(ADC3_DMA_INSTANCE)
+#define ADC3_DMA_IRQHandler           DMA2_Stream0_IRQHandler
+#define ADC3_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define ADC3_DMA_INSTANCE             DMA2_Stream0
+#define ADC3_DMA_CHANNEL              DMA_CHANNEL_2
+#define ADC3_DMA_IRQ                  DMA2_Stream0_IRQn
+#elif defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_IRQHandler           DMA2_Stream0_IRQHandler
+#define SPI1_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_RX_DMA_INSTANCE             DMA2_Stream0
+#define SPI1_RX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_RX_DMA_IRQ                  DMA2_Stream0_IRQn
+#elif defined(BSP_SPI4_RX_USING_DMA) && !defined(SPI4_RX_DMA_INSTANCE)
+#define SPI4_DMA_RX_IRQHandler           DMA2_Stream0_IRQHandler
+#define SPI4_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI4_RX_DMA_INSTANCE             DMA2_Stream0
+#define SPI4_RX_DMA_CHANNEL              DMA_CHANNEL_4
+#define SPI4_RX_DMA_IRQ                  DMA2_Stream0_IRQn
+#elif defined(BSP_MEMTOMEM0_USING_DMA) && !defined(MEMTOMEM0_DMA_INSTANCE)
+#define MEMTOMEM0_DMA_IRQHandler           DMA2_Stream0_IRQHandler
+#define MEMTOMEM0_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define MEMTOMEM0_DMA_INSTANCE             DMA2_Stream0
+#define MEMTOMEM0_DMA_CHANNEL              DMA_CHANNEL_7
+#define MEMTOMEM0_DMA_IRQ                  DMA2_Stream0_IRQn
+#endif
+
+/* DMA2 stream1 */
+#if defined(BSP_ADC3_USING_DMA) && !defined(ADC3_DMA_INSTANCE)
+#define ADC3_DMA_IRQHandler           DMA2_Stream1_IRQHandler
+#define ADC3_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define ADC3_DMA_INSTANCE             DMA2_Stream1
+#define ADC3_DMA_CHANNEL              DMA_CHANNEL_2
+#define ADC3_DMA_IRQ                  DMA2_Stream1_IRQn
+#elif defined(BSP_MEMTOMEM1_USING_DMA) && !defined(MEMTOMEM1_DMA_INSTANCE)
+#define MEMTOMEM1_DMA_IRQHandler           DMA2_Stream1_IRQHandler
+#define MEMTOMEM1_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define MEMTOMEM1_DMA_INSTANCE             DMA2_Stream1
+#define MEMTOMEM1_DMA_CHANNEL              DMA_CHANNEL_3
+#define MEMTOMEM1_DMA_IRQ                  DMA2_Stream1_IRQn
+#elif defined(BSP_SPI4_TX_USING_DMA) && !defined(SPI4_TX_DMA_INSTANCE)
+#define SPI4_DMA_TX_IRQHandler           DMA2_Stream1_IRQHandler
+#define SPI4_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI4_TX_DMA_INSTANCE             DMA2_Stream1
+#define SPI4_TX_DMA_CHANNEL              DMA_CHANNEL_4
+#define SPI4_TX_DMA_IRQ                  DMA2_Stream1_IRQn
+#elif defined(BSP_UART6_RX_USING_DMA) && !defined(UART6_RX_DMA_INSTANCE)
+#define UART6_DMA_RX_IRQHandler          DMA2_Stream1_IRQHandler
+#define UART6_RX_DMA_RCC                 RCC_AHB1ENR_DMA2EN
+#define UART6_RX_DMA_INSTANCE            DMA2_Stream1
+#define UART6_RX_DMA_CHANNEL             DMA_CHANNEL_5
+#define UART6_RX_DMA_IRQ                 DMA2_Stream1_IRQn
+#endif
+
+/* DMA2 stream2 */
+#if defined(BSP_ADC2_USING_DMA) && !defined(ADC2_DMA_INSTANCE)
+#define ADC2_DMA_IRQHandler           DMA2_Stream2_IRQHandler
+#define ADC2_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define ADC2_DMA_INSTANCE             DMA2_Stream2
+#define ADC2_DMA_CHANNEL              DMA_CHANNEL_1
+#define ADC2_DMA_IRQ                  DMA2_Stream2_IRQn
+#elif defined(BSP_MEMTOMEM2_USING_DMA) && !defined(MEMTOMEM2_DMA_INSTANCE)
+#define MEMTOMEM2_DMA_IRQHandler           DMA2_Stream2_IRQHandler
+#define MEMTOMEM2_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define MEMTOMEM2_DMA_INSTANCE             DMA2_Stream2
+#define MEMTOMEM2_DMA_CHANNEL              DMA_CHANNEL_2
+#define MEMTOMEM2_DMA_IRQ                  DMA2_Stream2_IRQn
+#elif defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_IRQHandler           DMA2_Stream2_IRQHandler
+#define SPI1_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_RX_DMA_INSTANCE             DMA2_Stream2
+#define SPI1_RX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_RX_DMA_IRQ                  DMA2_Stream2_IRQn
+#elif defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_DMA_RX_IRQHandler         DMA2_Stream2_IRQHandler
+#define UART1_RX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART1_RX_DMA_INSTANCE           DMA2_Stream2
+#define UART1_RX_DMA_CHANNEL            DMA_CHANNEL_4
+#define UART1_RX_DMA_IRQ                DMA2_Stream2_IRQn
+#elif defined(BSP_UART6_RX_USING_DMA) && !defined(UART6_RX_DMA_INSTANCE)
+#define UART6_DMA_RX_IRQHandler         DMA2_Stream2_IRQHandler
+#define UART6_RX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART6_RX_DMA_INSTANCE           DMA2_Stream2
+#define UART6_RX_DMA_CHANNEL            DMA_CHANNEL_5
+#define UART6_RX_DMA_IRQ                DMA2_Stream2_IRQn
+#endif
+
+/* DMA2 stream3 */
+#if defined(BSP_MEMTOMEM3_USING_DMA) && !defined(MEMTOMEM3_DMA_INSTANCE)
+#define MEMTOMEM3_DMA_IRQHandler           DMA2_Stream3_IRQHandler
+#define MEMTOMEM3_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define MEMTOMEM3_DMA_INSTANCE             DMA2_Stream3
+#define MEMTOMEM3_DMA_CHANNEL              DMA_CHANNEL_0
+#define MEMTOMEM3_DMA_IRQ                  DMA2_Stream3_IRQn
+#elif defined(BSP_ADC2_USING_DMA) && !defined(ADC2_DMA_INSTANCE)
+#define ADC2_DMA_IRQHandler           DMA2_Stream3_IRQHandler
+#define ADC2_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define ADC2_DMA_INSTANCE             DMA2_Stream3
+#define ADC2_DMA_CHANNEL              DMA_CHANNEL_1
+#define ADC2_DMA_IRQ                  DMA2_Stream3_IRQn
+#elif defined(BSP_SPI5_RX_USING_DMA) && !defined(SPI5_RX_DMA_INSTANCE)
+#define SPI5_DMA_RX_IRQHandler           DMA2_Stream3_IRQHandler
+#define SPI5_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_RX_DMA_INSTANCE             DMA2_Stream3
+#define SPI5_RX_DMA_CHANNEL              DMA_CHANNEL_2
+#define SPI5_RX_DMA_IRQ                  DMA2_Stream3_IRQn
+#elif defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_TX_IRQHandler           DMA2_Stream3_IRQHandler
+#define SPI1_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_TX_DMA_INSTANCE             DMA2_Stream3
+#define SPI1_TX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_TX_DMA_IRQ                  DMA2_Stream3_IRQn
+#elif defined(BSP_SDIO_RX_USING_DMA) && !defined(SDIO_RX_DMA_INSTANCE)
+#define SDIO_DMA_RX_IRQHandler           DMA2_Stream3_IRQHandler
+#define SDIO_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SDIO_RX_DMA_INSTANCE             DMA2_Stream3
+#define SDIO_RX_DMA_CHANNEL              DMA_CHANNEL_4
+#define SDIO_RX_DMA_IRQ                  DMA2_Stream3_IRQn
+#elif defined(BSP_SPI4_RX_USING_DMA) && !defined(SPI4_RX_DMA_INSTANCE)
+#define SPI4_DMA_RX_IRQHandler           DMA2_Stream3_IRQHandler
+#define SPI4_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI4_RX_DMA_INSTANCE             DMA2_Stream3
+#define SPI4_RX_DMA_CHANNEL              DMA_CHANNEL_5
+#define SPI4_RX_DMA_IRQ                  DMA2_Stream3_IRQn
+#endif
+
+/* DMA2 stream4 */
+#if defined(BSP_ADC1_USING_DMA) && !defined(ADC1_DMA_INSTANCE)
+#define ADC1_DMA_IRQHandler           DMA2_Stream4_IRQHandler
+#define ADC1_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define ADC1_DMA_INSTANCE             DMA2_Stream4
+#define ADC1_DMA_CHANNEL              DMA_CHANNEL_0
+#define ADC1_DMA_IRQ                  DMA2_Stream4_IRQn
+#elif defined(BSP_SPI5_TX_USING_DMA) && !defined(SPI5_TX_DMA_INSTANCE)
+#define SPI5_DMA_TX_IRQHandler           DMA2_Stream4_IRQHandler
+#define SPI5_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_TX_DMA_INSTANCE             DMA2_Stream4
+#define SPI5_TX_DMA_CHANNEL              DMA_CHANNEL_2
+#define SPI5_TX_DMA_IRQ                  DMA2_Stream4_IRQn
+#elif defined(BSP_MEMTOMEM4_USING_DMA) && !defined(MEMTOMEM4_DMA_INSTANCE)
+#define MEMTOMEM4_DMA_IRQHandler           DMA2_Stream4_IRQHandler
+#define MEMTOMEM4_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define MEMTOMEM4_DMA_INSTANCE             DMA2_Stream4
+#define MEMTOMEM4_DMA_CHANNEL              DMA_CHANNEL_4
+#define MEMTOMEM4_DMA_IRQ                  DMA2_Stream4_IRQn
+#elif defined(BSP_SPI4_TX_USING_DMA) && !defined(SPI4_TX_DMA_INSTANCE)
+#define SPI4_DMA_TX_IRQHandler           DMA2_Stream4_IRQHandler
+#define SPI4_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI4_TX_DMA_INSTANCE             DMA2_Stream4
+#define SPI4_TX_DMA_CHANNEL              DMA_CHANNEL_5
+#define SPI4_TX_DMA_IRQ                  DMA2_Stream4_IRQn
+#endif
+
+/* DMA2 stream5 */
+#if defined(BSP_SPI6_TX_USING_DMA) && !defined(SPI6_TX_DMA_INSTANCE)
+#define SPI6_DMA_TX_IRQHandler           DMA2_Stream5_IRQHandler
+#define SPI6_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI6_TX_DMA_INSTANCE             DMA2_Stream5
+#define SPI6_TX_DMA_CHANNEL              DMA_CHANNEL_1
+#define SPI6_TX_DMA_IRQ                  DMA2_Stream5_IRQn
+#elif defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_TX_IRQHandler           DMA2_Stream5_IRQHandler
+#define SPI1_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_TX_DMA_INSTANCE             DMA2_Stream5
+#define SPI1_TX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_TX_DMA_IRQ                  DMA2_Stream5_IRQn
+#elif defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_DMA_RX_IRQHandler         DMA2_Stream5_IRQHandler
+#define UART1_RX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART1_RX_DMA_INSTANCE           DMA2_Stream5
+#define UART1_RX_DMA_CHANNEL            DMA_CHANNEL_4
+#define UART1_RX_DMA_IRQ                DMA2_Stream5_IRQn
+#elif defined(BSP_MEMTOMEM5_USING_DMA) && !defined(MEMTOMEM5_DMA_INSTANCE)
+#define MEMTOMEM5_DMA_IRQHandler           DMA2_Stream5_IRQHandler
+#define MEMTOMEM5_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define MEMTOMEM5_DMA_INSTANCE             DMA2_Stream5
+#define MEMTOMEM5_DMA_CHANNEL              DMA_CHANNEL_5
+#define MEMTOMEM5_DMA_IRQ                  DMA2_Stream5_IRQn
+#elif defined(BSP_SPI5_RX_USING_DMA) && !defined(SPI5_RX_DMA_INSTANCE)
+#define SPI5_DMA_RX_IRQHandler           DMA2_Stream5_IRQHandler
+#define SPI5_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_RX_DMA_INSTANCE             DMA2_Stream5
+#define SPI5_RX_DMA_CHANNEL              DMA_CHANNEL_7
+#define SPI5_RX_DMA_IRQ                  DMA2_Stream5_IRQn
+#endif
+
+/* DMA2 stream6 */
+#if defined(BSP_SPI6_RX_USING_DMA) && !defined(SPI6_RX_DMA_INSTANCE)
+#define SPI6_DMA_RX_IRQHandler           DMA2_Stream6_IRQHandler
+#define SPI6_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI6_RX_DMA_INSTANCE             DMA2_Stream6
+#define SPI6_RX_DMA_CHANNEL              DMA_CHANNEL_1
+#define SPI6_RX_DMA_IRQ                  DMA2_Stream6_IRQn
+#elif defined(BSP_MEMTOMEM6_USING_DMA) && !defined(MEMTOMEM6_DMA_INSTANCE)
+#define MEMTOMEM6_DMA_IRQHandler         DMA2_Stream6_IRQHandler
+#define MEMTOMEM6_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define MEMTOMEM6_DMA_INSTANCE           DMA2_Stream6
+#define MEMTOMEM6_DMA_CHANNEL            DMA_CHANNEL_3
+#define MEMTOMEM6_DMA_IRQ                DMA2_Stream6_IRQn
+#elif defined(BSP_SDIO_TX_USING_DMA) && !defined(SDIO_TX_DMA_INSTANCE)
+#define SDIO_DMA_TX_IRQHandler         DMA2_Stream6_IRQHandler
+#define SDIO_TX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define SDIO_TX_DMA_INSTANCE           DMA2_Stream6
+#define SDIO_TX_DMA_CHANNEL            DMA_CHANNEL_4
+#define SDIO_TX_DMA_IRQ                DMA2_Stream6_IRQn
+#elif defined(BSP_UART6_TX_USING_DMA) && !defined(UART6_TX_DMA_INSTANCE)
+#define UART6_DMA_TX_IRQHandler         DMA2_Stream6_IRQHandler
+#define UART6_TX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART6_TX_DMA_INSTANCE           DMA2_Stream6
+#define UART6_TX_DMA_CHANNEL            DMA_CHANNEL_5
+#define UART6_TX_DMA_IRQ                DMA2_Stream6_IRQn
+#elif defined(BSP_SPI5_TX_USING_DMA) && !defined(SPI5_TX_DMA_INSTANCE)
+#define SPI5_DMA_TX_IRQHandler           DMA2_Stream6_IRQHandler
+#define SPI5_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_TX_DMA_INSTANCE             DMA2_Stream6
+#define SPI5_TX_DMA_CHANNEL              DMA_CHANNEL_7
+#define SPI5_TX_DMA_IRQ                  DMA2_Stream6_IRQn
+#endif
+
+/* DMA2 stream7 */
+#if defined(BSP_UART1_TX_USING_DMA) && !defined(UART1_TX_DMA_INSTANCE)
+#define UART1_DMA_TX_IRQHandler         DMA2_Stream7_IRQHandler
+#define UART1_TX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART1_TX_DMA_INSTANCE           DMA2_Stream7
+#define UART1_TX_DMA_CHANNEL            DMA_CHANNEL_4
+#define UART1_TX_DMA_IRQ                DMA2_Stream7_IRQn
+#elif defined(BSP_UART6_TX_USING_DMA) && !defined(UART6_TX_DMA_INSTANCE)
+#define UART6_DMA_TX_IRQHandler         DMA2_Stream7_IRQHandler
+#define UART6_TX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART6_TX_DMA_INSTANCE           DMA2_Stream7
+#define UART6_TX_DMA_CHANNEL            DMA_CHANNEL_5
+#define UART6_TX_DMA_IRQ                DMA2_Stream7_IRQn
+#elif defined(BSP_MEMTOMEM7_USING_DMA) && !defined(MEMTOMEM7_DMA_INSTANCE)
+#define MEMTOMEM7_DMA_IRQHandler         DMA2_Stream7_IRQHandler
+#define MEMTOMEM7_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define MEMTOMEM7_DMA_INSTANCE           DMA2_Stream7
+#define MEMTOMEM7_DMA_CHANNEL            DMA_CHANNEL_6
+#define MEMTOMEM7_DMA_IRQ                DMA2_Stream7_IRQn
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __DMA_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f4/i2c_hard_config.h

@@ -0,0 +1,198 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2024-02-06     Dyyt587   first version
+ * 2024-04-23     Zeidan    Add I2Cx_xx_DMA_CONFIG
+ */
+#ifndef __I2C_HARD_CONFIG_H__
+#define __I2C_HARD_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_HARD_I2C1
+#ifndef I2C1_BUS_CONFIG
+#define I2C1_BUS_CONFIG                             \
+    {                                               \
+        .Instance = I2C1,                           \
+        .timing=0x10707DBC,                         \
+        .timeout=0x1000,                            \
+        .name = "hwi2c1",                           \
+        .evirq_type = I2C1_EV_IRQn,                 \
+        .erirq_type = I2C1_ER_IRQn,                 \
+    }
+#endif /* I2C1_BUS_CONFIG */
+#endif /* BSP_USING_HARD_I2C1 */
+
+#ifdef BSP_I2C1_TX_USING_DMA
+#ifndef I2C1_TX_DMA_CONFIG
+#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
+#define I2C1_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = I2C1_TX_DMA_RCC,                 \
+        .Instance = I2C1_TX_DMA_INSTANCE,           \
+        .dma_irq = I2C1_TX_DMA_IRQ,                 \
+        .channel = I2C1_TX_DMA_CHANNEL              \
+    }
+#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32MP1) || defined(SOC_SERIES_STM32WB) || defined(SOC_SERIES_STM32H7)
+#define I2C1_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = I2C1_TX_DMA_RCC,                 \
+        .Instance = I2C1_TX_DMA_INSTANCE,           \
+        .dma_irq = I2C1_TX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_I2C1_TX              \
+    }
+#endif /* defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) */
+#endif /* I2C1_TX_DMA_CONFIG */
+#endif /* BSP_I2C1_TX_USING_DMA */
+
+#ifdef BSP_I2C1_RX_USING_DMA
+#ifndef I2C1_RX_DMA_CONFIG
+#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
+#define I2C1_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = I2C1_RX_DMA_RCC,                 \
+        .Instance = I2C1_RX_DMA_INSTANCE,           \
+        .dma_irq = I2C1_RX_DMA_IRQ,                 \
+        .channel = I2C1_RX_DMA_CHANNEL,             \
+    }
+#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32MP1) || defined(SOC_SERIES_STM32WB) || defined(SOC_SERIES_STM32H7)
+#define I2C1_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = I2C1_RX_DMA_RCC,                 \
+        .Instance = I2C1_RX_DMA_INSTANCE,           \
+        .dma_irq = I2C1_RX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_I2C1_RX              \
+    }
+#endif /* defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) */
+#endif /* I2C1_RX_DMA_CONFIG */
+#endif /* BSP_I2C1_RX_USING_DMA */
+
+#ifdef BSP_USING_HARD_I2C2
+#ifndef I2C2_BUS_CONFIG
+#define I2C2_BUS_CONFIG                             \
+    {                                               \
+        .Instance = I2C2,                           \
+        .timing=0x10707DBC,                         \
+        .timeout=0x1000,                            \
+        .name = "hwi2c2",                           \
+        .evirq_type = I2C2_EV_IRQn,                 \
+        .erirq_type = I2C2_ER_IRQn,                 \
+    }
+#endif /* I2C2_BUS_CONFIG */
+#endif /* BSP_USING_HARD_I2C2 */
+
+#ifdef BSP_I2C2_TX_USING_DMA
+#ifndef I2C2_TX_DMA_CONFIG
+#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
+#define I2C2_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = I2C2_TX_DMA_RCC,                 \
+        .Instance = I2C2_TX_DMA_INSTANCE,           \
+        .dma_irq = I2C2_TX_DMA_IRQ,                 \
+        .channel = I2C2_TX_DMA_CHANNEL,             \
+    }
+#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32MP1) || defined(SOC_SERIES_STM32WB) || defined(SOC_SERIES_STM32H7)
+#define I2C2_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = I2C2_TX_DMA_RCC,                 \
+        .Instance = I2C2_TX_DMA_INSTANCE,           \
+        .dma_irq = I2C2_TX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_I2C2_TX              \
+    }
+#endif /* defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) */
+#endif /* I2C2_TX_DMA_CONFIG */
+#endif /* BSP_I2C2_TX_USING_DMA */
+
+#ifdef BSP_I2C2_RX_USING_DMA
+#ifndef I2C2_RX_DMA_CONFIG
+#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
+#define I2C2_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = I2C2_RX_DMA_RCC,                 \
+        .Instance = I2C2_RX_DMA_INSTANCE,           \
+        .dma_irq = I2C2_RX_DMA_IRQ,                 \
+        .channel = I2C2_RX_DMA_CHANNEL,             \
+    }
+#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32MP1) || defined(SOC_SERIES_STM32WB) || defined(SOC_SERIES_STM32H7)
+#define I2C2_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = I2C2_RX_DMA_RCC,                 \
+        .Instance = I2C2_RX_DMA_INSTANCE,           \
+        .dma_irq = I2C2_RX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_I2C2_RX              \
+    }
+#endif /* defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) */
+#endif /* I2C2_RX_DMA_CONFIG */
+#endif /* BSP_I2C2_RX_USING_DMA */
+
+#ifdef BSP_USING_HARD_I2C3
+#ifndef I2C3_BUS_CONFIG
+#define I2C3_BUS_CONFIG                             \
+    {                                               \
+        .Instance = I2C3,                           \
+        .timing=0x10707DBC,                         \
+        .timeout=0x1000,                            \
+        .name = "hwi2c3",                           \
+        .evirq_type = I2C3_EV_IRQn,                 \
+        .erirq_type = I2C3_ER_IRQn,                 \
+    }
+#endif /* I2C3_BUS_CONFIG */
+#endif /* BSP_USING_HARD_I2C3 */
+
+#ifdef BSP_I2C3_TX_USING_DMA
+#ifndef I2C3_TX_DMA_CONFIG
+#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
+#define I2C3_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = I2C3_TX_DMA_RCC,                 \
+        .Instance = I2C3_TX_DMA_INSTANCE,           \
+        .dma_irq = I2C3_TX_DMA_IRQ,                 \
+        .channel = I2C3_TX_DMA_CHANNEL,             \
+    }
+#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32MP1) || defined(SOC_SERIES_STM32WB) || defined(SOC_SERIES_STM32H7)
+#define I2C3_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = I2C3_TX_DMA_RCC,                 \
+        .Instance = I2C3_TX_DMA_INSTANCE,           \
+        .dma_irq = I2C3_TX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_I2C3_TX              \
+    }
+#endif /* defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) */
+#endif /* I2C3_TX_DMA_CONFIG */
+#endif /* BSP_I2C3_TX_USING_DMA */
+
+#ifdef BSP_I2C3_RX_USING_DMA
+#ifndef I2C3_RX_DMA_CONFIG
+#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
+#define I2C3_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = I2C3_RX_DMA_RCC,                 \
+        .Instance = I2C3_RX_DMA_INSTANCE,           \
+        .dma_irq = I2C3_RX_DMA_IRQ,                 \
+        .channel = I2C3_RX_DMA_CHANNEL,             \
+    }
+#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32MP1) || defined(SOC_SERIES_STM32WB) || defined(SOC_SERIES_STM32H7)
+#define I2C3_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = I2C3_RX_DMA_RCC,                 \
+        .Instance = I2C3_RX_DMA_INSTANCE,           \
+        .dma_irq = I2C3_RX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_I2C3_RX              \
+    }
+#endif /* defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) */
+#endif /* I2C3_RX_DMA_CONFIG */
+#endif /* BSP_I2C3_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__I2C_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f4/pulse_encoder_config.h

@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-08-23     balanceTWK   first version
+ */
+
+#ifndef __PULSE_ENCODER_CONFIG_H__
+#define __PULSE_ENCODER_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PULSE_ENCODER1
+#ifndef PULSE_ENCODER1_CONFIG
+#define PULSE_ENCODER1_CONFIG                          \
+    {                                                  \
+       .tim_handler.Instance    = TIM1,                \
+       .encoder_irqn            = TIM1_UP_TIM10_IRQn,  \
+       .name                    = "pulse1"             \
+    }
+#endif /* PULSE_ENCODER1_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER1 */
+
+#ifdef BSP_USING_PULSE_ENCODER2
+#ifndef PULSE_ENCODER2_CONFIG
+#define PULSE_ENCODER2_CONFIG                          \
+    {                                                  \
+       .tim_handler.Instance    = TIM2,                \
+       .encoder_irqn            = TIM2_IRQn,           \
+       .name                    = "pulse2"             \
+    }
+#endif /* PULSE_ENCODER2_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER2 */
+
+#ifdef BSP_USING_PULSE_ENCODER3
+#ifndef PULSE_ENCODER3_CONFIG
+#define PULSE_ENCODER3_CONFIG                          \
+    {                                                  \
+       .tim_handler.Instance    = TIM3,                \
+       .encoder_irqn            = TIM3_IRQn,           \
+       .name                    = "pulse3"             \
+    }
+#endif /* PULSE_ENCODER3_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER3 */
+
+#ifdef BSP_USING_PULSE_ENCODER4
+#ifndef PULSE_ENCODER4_CONFIG
+#define PULSE_ENCODER4_CONFIG                          \
+    {                                                  \
+       .tim_handler.Instance    = TIM4,                \
+       .encoder_irqn            = TIM4_IRQn,           \
+       .name                    = "pulse4"             \
+    }
+#endif /* PULSE_ENCODER4_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER4 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PULSE_ENCODER_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f4/pwm_config.h

@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     zylx         first version
+ * 2023-04-08     Wangyuqiang  complete PWM defination
+ */
+
+#ifndef __PWM_CONFIG_H__
+#define __PWM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PWM1
+#define PWM1_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM1,         \
+       .name                    = "pwm1",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM1 */
+
+#ifdef BSP_USING_PWM2
+#define PWM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .name                    = "pwm2",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM2 */
+
+#ifdef BSP_USING_PWM3
+#define PWM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .name                    = "pwm3",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM3 */
+
+#ifdef BSP_USING_PWM4
+#define PWM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .name                    = "pwm4",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM4 */
+
+#ifdef BSP_USING_PWM5
+#define PWM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .name                    = "pwm5",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM5 */
+
+#ifdef BSP_USING_PWM6
+#define PWM6_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM6,         \
+       .name                    = "pwm6",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM6 */
+
+#ifdef BSP_USING_PWM7
+#define PWM7_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM7,         \
+       .name                    = "pwm7",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM7 */
+
+#ifdef BSP_USING_PWM8
+#define PWM8_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM8,         \
+       .name                    = "pwm8",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM8 */
+
+#ifdef BSP_USING_PWM9
+#define PWM9_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM9,         \
+       .name                    = "pwm9",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM9 */
+
+#ifdef BSP_USING_PWM10
+#define PWM10_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM10,        \
+       .name                    = "pwm10",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM10 */
+
+#ifdef BSP_USING_PWM11
+#define PWM11_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM11,        \
+       .name                    = "pwm11",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM11 */
+
+#ifdef BSP_USING_PWM12
+#define PWM12_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM12,        \
+       .name                    = "pwm12",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM12 */
+
+#ifdef BSP_USING_PWM13
+#define PWM13_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM13,        \
+       .name                    = "pwm13",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM13 */
+
+#ifdef BSP_USING_PWM14
+#define PWM14_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM14,        \
+       .name                    = "pwm14",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM14 */
+
+#ifdef BSP_USING_PWM15
+#define PWM15_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM15,        \
+       .name                    = "pwm15",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM15 */
+
+#ifdef BSP_USING_PWM16
+#define PWM16_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM16,        \
+       .name                    = "pwm16",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM16 */
+
+#ifdef BSP_USING_PWM17
+#define PWM17_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM17,        \
+       .name                    = "pwm17",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM17 */
+
+#ifdef BSP_USING_PWM18
+#define PWM18_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM18,        \
+       .name                    = "pwm18",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM18 */
+
+#ifdef BSP_USING_PWM19
+#define PWM19_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM19,        \
+       .name                    = "pwm19",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM19 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PWM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f4/qspi_config.h

@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-22     zylx         first version
+ */
+
+#ifndef __QSPI_CONFIG_H__
+#define __QSPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_QSPI
+#ifndef QSPI_BUS_CONFIG
+#define QSPI_BUS_CONFIG                                        \
+    {                                                          \
+        .Instance = QUADSPI,                                   \
+        .Init.FifoThreshold = 4,                               \
+        .Init.SampleShifting = QSPI_SAMPLE_SHIFTING_HALFCYCLE, \
+        .Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_5_CYCLE,  \
+    }
+#endif /* QSPI_BUS_CONFIG */
+#endif /* BSP_USING_QSPI */
+
+#ifdef BSP_QSPI_USING_DMA
+#ifndef QSPI_DMA_CONFIG
+#define QSPI_DMA_CONFIG                                        \
+    {                                                          \
+        .Instance = QSPI_DMA_INSTANCE,                         \
+        .Init.Channel  = QSPI_DMA_CHANNEL,                     \
+        .Init.Direction = DMA_PERIPH_TO_MEMORY,                \
+        .Init.PeriphInc = DMA_PINC_DISABLE,                    \
+        .Init.MemInc = DMA_MINC_ENABLE,                        \
+        .Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE,       \
+        .Init.MemDataAlignment = DMA_MDATAALIGN_BYTE,          \
+        .Init.Mode = DMA_NORMAL,                               \
+        .Init.Priority = DMA_PRIORITY_LOW                      \
+    }
+#endif /* QSPI_DMA_CONFIG */
+#endif /* BSP_QSPI_USING_DMA */
+
+#define QSPI_IRQn                   QUADSPI_IRQn
+#define QSPI_IRQHandler             QUADSPI_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __QSPI_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f4/sdio_config.h

@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     BalanceTWK   first version
+ */
+
+#ifndef __SDIO_CONFIG_H__
+#define __SDIO_CONFIG_H__
+
+#include <rtthread.h>
+#include "stm32f4xx_hal.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SDIO
+#define SDIO_BUS_CONFIG                                  \
+    {                                                    \
+        .Instance = SDIO,                                \
+        .dma_rx.dma_rcc = RCC_AHB1ENR_DMA2EN,            \
+        .dma_tx.dma_rcc = RCC_AHB1ENR_DMA2EN,            \
+        .dma_rx.Instance = DMA2_Stream3,                 \
+        .dma_rx.channel = DMA_CHANNEL_4,                 \
+        .dma_rx.dma_irq = DMA2_Stream3_IRQn,             \
+        .dma_tx.Instance = DMA2_Stream6,                 \
+        .dma_tx.channel = DMA_CHANNEL_4,                 \
+        .dma_tx.dma_irq = DMA2_Stream6_IRQn,             \
+    }
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SDIO_CONFIG_H__ */
+
+
+

libraries/HAL_Drivers/drivers/config/f4/spi_config.h

@@ -0,0 +1,200 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ * 2019-01-03     zylx         modify DMA support
+ */
+
+#ifndef __SPI_CONFIG_H__
+#define __SPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SPI1
+#ifndef SPI1_BUS_CONFIG
+#define SPI1_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI1,                           \
+        .bus_name = "spi1",                         \
+        .irq_type = SPI1_IRQn,                      \
+    }
+#endif /* SPI1_BUS_CONFIG */
+#endif /* BSP_USING_SPI1 */
+
+#ifdef BSP_SPI1_TX_USING_DMA
+#ifndef SPI1_TX_DMA_CONFIG
+#define SPI1_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_TX_DMA_RCC,                 \
+        .Instance = SPI1_TX_DMA_INSTANCE,           \
+        .channel = SPI1_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI1_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_TX_DMA_CONFIG */
+#endif /* BSP_SPI1_TX_USING_DMA */
+
+#ifdef BSP_SPI1_RX_USING_DMA
+#ifndef SPI1_RX_DMA_CONFIG
+#define SPI1_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_RX_DMA_RCC,                 \
+        .Instance = SPI1_RX_DMA_INSTANCE,           \
+        .channel = SPI1_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI1_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_RX_DMA_CONFIG */
+#endif /* BSP_SPI1_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI2
+#ifndef SPI2_BUS_CONFIG
+#define SPI2_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI2,                           \
+        .bus_name = "spi2",                         \
+        .irq_type = SPI2_IRQn,                      \
+    }
+#endif /* SPI2_BUS_CONFIG */
+#endif /* BSP_USING_SPI2 */
+
+#ifdef BSP_SPI2_TX_USING_DMA
+#ifndef SPI2_TX_DMA_CONFIG
+#define SPI2_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI2_TX_DMA_RCC,                 \
+        .Instance = SPI2_TX_DMA_INSTANCE,           \
+        .channel = SPI2_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI2_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI2_TX_DMA_CONFIG */
+#endif /* BSP_SPI2_TX_USING_DMA */
+
+#ifdef BSP_SPI2_RX_USING_DMA
+#ifndef SPI2_RX_DMA_CONFIG
+#define SPI2_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI2_RX_DMA_RCC,                 \
+        .Instance = SPI2_RX_DMA_INSTANCE,           \
+        .channel = SPI2_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI2_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI2_RX_DMA_CONFIG */
+#endif /* BSP_SPI2_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI3
+#ifndef SPI3_BUS_CONFIG
+#define SPI3_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI3,                           \
+        .bus_name = "spi3",                         \
+        .irq_type = SPI3_IRQn,                      \
+    }
+#endif /* SPI3_BUS_CONFIG */
+#endif /* BSP_USING_SPI3 */
+
+#ifdef BSP_SPI3_TX_USING_DMA
+#ifndef SPI3_TX_DMA_CONFIG
+#define SPI3_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI3_TX_DMA_RCC,                 \
+        .Instance = SPI3_TX_DMA_INSTANCE,           \
+        .channel = SPI3_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI3_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI3_TX_DMA_CONFIG */
+#endif /* BSP_SPI3_TX_USING_DMA */
+
+#ifdef BSP_SPI3_RX_USING_DMA
+#ifndef SPI3_RX_DMA_CONFIG
+#define SPI3_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI3_RX_DMA_RCC,                 \
+        .Instance = SPI3_RX_DMA_INSTANCE,           \
+        .channel = SPI3_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI3_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI3_RX_DMA_CONFIG */
+#endif /* BSP_SPI3_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI4
+#ifndef SPI4_BUS_CONFIG
+#define SPI4_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI4,                           \
+        .bus_name = "spi4",                         \
+        .irq_type = SPI4_IRQn,                      \
+    }
+#endif /* SPI4_BUS_CONFIG */
+#endif /* BSP_USING_SPI4 */
+
+#ifdef BSP_SPI4_TX_USING_DMA
+#ifndef SPI4_TX_DMA_CONFIG
+#define SPI4_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI4_TX_DMA_RCC,                 \
+        .Instance = SPI4_TX_DMA_INSTANCE,           \
+        .channel = SPI4_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI4_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI4_TX_DMA_CONFIG */
+#endif /* BSP_SPI4_TX_USING_DMA */
+
+#ifdef BSP_SPI4_RX_USING_DMA
+#ifndef SPI4_RX_DMA_CONFIG
+#define SPI4_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI4_RX_DMA_RCC,                 \
+        .Instance = SPI4_RX_DMA_INSTANCE,           \
+        .channel = SPI4_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI4_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI4_RX_DMA_CONFIG */
+#endif /* BSP_SPI4_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI5
+#ifndef SPI5_BUS_CONFIG
+#define SPI5_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI5,                           \
+        .bus_name = "spi5",                         \
+        .irq_type = SPI5_IRQn,                      \
+    }
+#endif /* SPI5_BUS_CONFIG */
+#endif /* BSP_USING_SPI5 */
+
+#ifdef BSP_SPI5_TX_USING_DMA
+#ifndef SPI5_TX_DMA_CONFIG
+#define SPI5_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI5_TX_DMA_RCC,                 \
+        .Instance = SPI5_TX_DMA_INSTANCE,           \
+        .channel = SPI5_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI5_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI5_TX_DMA_CONFIG */
+#endif /* BSP_SPI5_TX_USING_DMA */
+
+#ifdef BSP_SPI5_RX_USING_DMA
+#ifndef SPI5_RX_DMA_CONFIG
+#define SPI5_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI5_RX_DMA_RCC,                 \
+        .Instance = SPI5_RX_DMA_INSTANCE,           \
+        .channel = SPI5_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI5_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI5_RX_DMA_CONFIG */
+#endif /* BSP_SPI5_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SPI_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f4/tim_config.h

@@ -0,0 +1,176 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-11     zylx         first version
+ * 2023-08-21     Donocean     support all timers(except advanced timer)
+ */
+
+#ifndef __TIM_CONFIG_H__
+#define __TIM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef TIM_DEV_INFO_CONFIG
+#define TIM_DEV_INFO_CONFIG                     \
+    {                                           \
+        .maxfreq = 1000000,                     \
+        .minfreq = 3000,                        \
+        .maxcnt  = 0xFFFF,                      \
+        .cntmode = HWTIMER_CNTMODE_UP,          \
+    }
+#endif /* TIM_DEV_INFO_CONFIG */
+
+#ifdef BSP_USING_TIM2
+#ifndef TIM2_CONFIG
+#define TIM2_CONFIG                                         \
+    {                                                       \
+       .tim_handle.Instance     = TIM2,                     \
+       .tim_irqn                = TIM2_IRQn,                \
+       .name                    = "timer2",                 \
+    }
+#endif /* TIM2_CONFIG */
+#endif /* BSP_USING_TIM2 */
+
+#ifdef BSP_USING_TIM3
+#ifndef TIM3_CONFIG
+#define TIM3_CONFIG                                         \
+    {                                                       \
+       .tim_handle.Instance     = TIM3,                     \
+       .tim_irqn                = TIM3_IRQn,                \
+       .name                    = "timer3",                 \
+    }
+#endif /* TIM3_CONFIG */
+#endif /* BSP_USING_TIM3 */
+
+#ifdef BSP_USING_TIM4
+#ifndef TIM4_CONFIG
+#define TIM4_CONFIG                                         \
+    {                                                       \
+       .tim_handle.Instance     = TIM4,                     \
+       .tim_irqn                = TIM4_IRQn,                \
+       .name                    = "timer4",                 \
+    }
+#endif /* TIM4_CONFIG */
+#endif /* BSP_USING_TIM4 */
+
+#ifdef BSP_USING_TIM5
+#ifndef TIM5_CONFIG
+#define TIM5_CONFIG                                         \
+    {                                                       \
+       .tim_handle.Instance     = TIM5,                     \
+       .tim_irqn                = TIM5_IRQn,                \
+       .name                    = "timer5",                 \
+    }
+#endif /* TIM5_CONFIG */
+#endif /* BSP_USING_TIM5 */
+
+#ifdef BSP_USING_TIM6
+#ifndef TIM6_CONFIG
+#if defined(STM32F412Cx) || defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx)
+#define TIM6_CONFIG                                         \
+    {                                                       \
+       .tim_handle.Instance     = TIM6,                     \
+       .tim_irqn                = TIM6_IRQn,                \
+       .name                    = "timer6",                 \
+    }
+#else
+#define TIM6_CONFIG                                         \
+    {                                                       \
+       .tim_handle.Instance     = TIM6,                     \
+       .tim_irqn                = TIM6_DAC_IRQn,            \
+       .name                    = "timer6",                 \
+    }
+#endif /* defined(STM32F412Cx) || defined(STM32F412Rx) || defined(STM32F412Vx) || defined(STM32F412Zx) */
+#endif /* TIM6_CONFIG */
+#endif /* BSP_USING_TIM6 */
+
+#ifdef BSP_USING_TIM7
+#ifndef TIM7_CONFIG
+#define TIM7_CONFIG                                         \
+    {                                                       \
+       .tim_handle.Instance     = TIM7,                     \
+       .tim_irqn                = TIM7_IRQn,                \
+       .name                    = "timer7",                 \
+    }
+#endif /* TIM7_CONFIG */
+#endif /* BSP_USING_TIM7 */
+
+#ifdef BSP_USING_TIM9
+#ifndef TIM9_CONFIG
+#define TIM9_CONFIG                                         \
+    {                                                       \
+       .tim_handle.Instance     = TIM9,                     \
+       .tim_irqn                = TIM1_BRK_TIM9_IRQn,       \
+       .name                    = "timer9",                 \
+    }
+#endif /* TIM9_CONFIG */
+#endif /* BSP_USING_TIM9 */
+
+#ifdef BSP_USING_TIM10
+#ifndef TIM10_CONFIG
+#define TIM10_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM10,                    \
+       .tim_irqn                = TIM1_UP_TIM10_IRQn,       \
+       .name                    = "timer10",                \
+    }
+#endif /* TIM10_CONFIG */
+#endif /* BSP_USING_TIM10 */
+
+#ifdef BSP_USING_TIM11
+#ifndef TIM11_CONFIG
+#define TIM11_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM11,                    \
+       .tim_irqn                = TIM1_TRG_COM_TIM11_IRQn,  \
+       .name                    = "timer11",                \
+    }
+#endif /* TIM11_CONFIG */
+#endif /* BSP_USING_TIM11 */
+
+#ifdef BSP_USING_TIM12
+#ifndef TIM12_CONFIG
+#define TIM12_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM12,                    \
+       .tim_irqn                = TIM8_BRK_TIM12_IRQn,      \
+       .name                    = "timer12",                \
+    }
+#endif /* TIM12_CONFIG */
+#endif /* BSP_USING_TIM12 */
+
+#ifdef BSP_USING_TIM13
+#ifndef TIM13_CONFIG
+#define TIM13_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM13,                    \
+       .tim_irqn                = TIM8_UP_TIM13_IRQn,       \
+       .name                    = "timer13",                \
+    }
+#endif /* TIM13_CONFIG */
+#endif /* BSP_USING_TIM13 */
+
+#ifdef BSP_USING_TIM14
+#ifndef TIM14_CONFIG
+#define TIM14_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM14,                    \
+       .tim_irqn                = TIM8_TRG_COM_TIM14_IRQn,  \
+       .name                    = "timer14",                \
+    }
+#endif /* TIM14_CONFIG */
+#endif /* BSP_USING_TIM14 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f4/uart_config.h

@@ -0,0 +1,305 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-10-30     SummerGift   first version
+ * 2019-01-03     zylx         modify dma support
+ */
+
+#ifndef __UART_CONFIG_H__
+#define __UART_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_USING_UART1)
+#ifndef UART1_CONFIG
+#define UART1_CONFIG                                                \
+    {                                                               \
+        .name = "uart1",                                            \
+        .Instance = USART1,                                         \
+        .irq_type = USART1_IRQn,                                    \
+    }
+#endif /* UART1_CONFIG */
+
+#if defined(BSP_UART1_RX_USING_DMA)
+#ifndef UART1_DMA_RX_CONFIG
+#define UART1_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART1_RX_DMA_INSTANCE,                         \
+        .channel = UART1_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART1_RX_DMA_RCC,                               \
+        .dma_irq = UART1_RX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_RX_CONFIG */
+#endif /* BSP_UART1_RX_USING_DMA */
+
+#if defined(BSP_UART1_TX_USING_DMA)
+#ifndef UART1_DMA_TX_CONFIG
+#define UART1_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART1_TX_DMA_INSTANCE,                         \
+        .channel = UART1_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART1_TX_DMA_RCC,                               \
+        .dma_irq = UART1_TX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_TX_CONFIG */
+#endif /* BSP_UART1_TX_USING_DMA */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_USING_UART2)
+#ifndef UART2_CONFIG
+#define UART2_CONFIG                                                \
+    {                                                               \
+        .name = "uart2",                                            \
+        .Instance = USART2,                                         \
+        .irq_type = USART2_IRQn,                                    \
+    }
+#endif /* UART2_CONFIG */
+
+#if defined(BSP_UART2_RX_USING_DMA)
+#ifndef UART2_DMA_RX_CONFIG
+#define UART2_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART2_RX_DMA_INSTANCE,                         \
+        .channel = UART2_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART2_RX_DMA_RCC,                               \
+        .dma_irq = UART2_RX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_RX_CONFIG */
+#endif /* BSP_UART2_RX_USING_DMA */
+
+#if defined(BSP_UART2_TX_USING_DMA)
+#ifndef UART2_DMA_TX_CONFIG
+#define UART2_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART2_TX_DMA_INSTANCE,                         \
+        .channel = UART2_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART2_TX_DMA_RCC,                               \
+        .dma_irq = UART2_TX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_TX_CONFIG */
+#endif /* BSP_UART2_TX_USING_DMA */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_USING_UART3)
+#ifndef UART3_CONFIG
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_IRQn,                                    \
+    }
+#endif /* UART3_CONFIG */
+
+#if defined(BSP_UART3_RX_USING_DMA)
+#ifndef UART3_DMA_RX_CONFIG
+#define UART3_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART3_RX_DMA_INSTANCE,                         \
+        .channel = UART3_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART3_RX_DMA_RCC,                               \
+        .dma_irq = UART3_RX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_RX_CONFIG */
+#endif /* BSP_UART3_RX_USING_DMA */
+
+#if defined(BSP_UART3_TX_USING_DMA)
+#ifndef UART3_DMA_TX_CONFIG
+#define UART3_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART3_TX_DMA_INSTANCE,                         \
+        .channel = UART3_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART3_TX_DMA_RCC,                               \
+        .dma_irq = UART3_TX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_TX_CONFIG */
+#endif /* BSP_UART3_TX_USING_DMA */
+#endif /* BSP_USING_UART3 */
+
+#if defined(BSP_USING_UART4)
+#ifndef UART4_CONFIG
+#define UART4_CONFIG                                                \
+    {                                                               \
+        .name = "uart4",                                            \
+        .Instance = UART4,                                          \
+        .irq_type = UART4_IRQn,                                     \
+    }
+#endif /* UART4_CONFIG */
+
+#if defined(BSP_UART4_RX_USING_DMA)
+#ifndef UART4_DMA_RX_CONFIG
+#define UART4_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART4_RX_DMA_INSTANCE,                         \
+        .channel = UART4_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART4_RX_DMA_RCC,                               \
+        .dma_irq = UART4_RX_DMA_IRQ,                               \
+    }
+#endif /* UART4_DMA_RX_CONFIG */
+#endif /* BSP_UART4_RX_USING_DMA */
+
+#if defined(BSP_UART4_TX_USING_DMA)
+#ifndef UART4_DMA_TX_CONFIG
+#define UART4_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART4_TX_DMA_INSTANCE,                         \
+        .channel = UART4_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART4_TX_DMA_RCC,                               \
+        .dma_irq = UART4_TX_DMA_IRQ,                               \
+    }
+#endif /* UART4_DMA_TX_CONFIG */
+#endif /* BSP_UART4_RX_USING_DMA */
+#endif /* BSP_USING_UART4 */
+
+#if defined(BSP_USING_UART5)
+#ifndef UART5_CONFIG
+#define UART5_CONFIG                                                \
+    {                                                               \
+        .name = "uart5",                                            \
+        .Instance = UART5,                                          \
+        .irq_type = UART5_IRQn,                                     \
+    }
+#endif /* UART5_CONFIG */
+
+#if defined(BSP_UART5_RX_USING_DMA)
+#ifndef UART5_DMA_RX_CONFIG
+#define UART5_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART5_RX_DMA_INSTANCE,                         \
+        .channel = UART5_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART5_RX_DMA_RCC,                               \
+        .dma_irq = UART5_RX_DMA_IRQ,                               \
+    }
+#endif /* UART5_DMA_RX_CONFIG */
+#endif /* BSP_UART5_RX_USING_DMA */
+
+#if defined(BSP_UART5_TX_USING_DMA)
+#ifndef UART5_DMA_TX_CONFIG
+#define UART5_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART5_TX_DMA_INSTANCE,                         \
+        .channel = UART5_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART5_TX_DMA_RCC,                               \
+        .dma_irq = UART5_TX_DMA_IRQ,                               \
+    }
+#endif /* UART5_DMA_TX_CONFIG */
+#endif /* BSP_UART5_TX_USING_DMA */
+#endif /* BSP_USING_UART5 */
+
+#if defined(BSP_USING_UART6)
+#ifndef UART6_CONFIG
+#define UART6_CONFIG                                                \
+    {                                                               \
+        .name = "uart6",                                            \
+        .Instance = USART6,                                         \
+        .irq_type = USART6_IRQn,                                    \
+    }
+#endif /* UART6_CONFIG */
+
+#if defined(BSP_UART6_RX_USING_DMA)
+#ifndef UART6_DMA_RX_CONFIG
+#define UART6_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART6_RX_DMA_INSTANCE,                         \
+        .channel = UART6_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART6_RX_DMA_RCC,                               \
+        .dma_irq = UART6_RX_DMA_IRQ,                               \
+    }
+#endif /* UART6_DMA_RX_CONFIG */
+#endif /* BSP_UART6_RX_USING_DMA */
+
+#if defined(BSP_UART6_TX_USING_DMA)
+#ifndef UART6_DMA_TX_CONFIG
+#define UART6_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART6_TX_DMA_INSTANCE,                         \
+        .channel = UART6_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART6_TX_DMA_RCC,                               \
+        .dma_irq = UART6_TX_DMA_IRQ,                               \
+    }
+#endif /* UART6_DMA_TX_CONFIG */
+#endif /* BSP_UART6_TX_USING_DMA */
+#endif /* BSP_USING_UART6 */
+
+#if defined(BSP_USING_UART7)
+#ifndef UART7_CONFIG
+#define UART7_CONFIG                                                \
+    {                                                               \
+        .name = "uart7",                                            \
+        .Instance = UART7,                                         \
+        .irq_type = UART7_IRQn,                                    \
+    }
+#endif /* UART7_CONFIG */
+
+#if defined(BSP_UART7_RX_USING_DMA)
+#ifndef UART7_DMA_RX_CONFIG
+#define UART7_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART7_RX_DMA_INSTANCE,                         \
+        .channel = UART7_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART7_RX_DMA_RCC,                               \
+        .dma_irq = UART7_RX_DMA_IRQ,                               \
+    }
+#endif /* UART7_DMA_RX_CONFIG */
+#endif /* BSP_UART7_RX_USING_DMA */
+
+#if defined(BSP_UART7_TX_USING_DMA)
+#ifndef UART7_DMA_TX_CONFIG
+#define UART7_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART7_TX_DMA_INSTANCE,                         \
+        .channel = UART7_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART7_TX_DMA_RCC,                               \
+        .dma_irq = UART7_TX_DMA_IRQ,                               \
+    }
+#endif /* UART7_DMA_TX_CONFIG */
+#endif /* BSP_UART7_TX_USING_DMA */
+#endif /* BSP_USING_UART7 */
+
+#if defined(BSP_USING_UART8)
+#ifndef UART8_CONFIG
+#define UART8_CONFIG                                                \
+    {                                                               \
+        .name = "uart8",                                            \
+        .Instance = UART8,                                         \
+        .irq_type = UART8_IRQn,                                    \
+    }
+#endif /* UART8_CONFIG */
+
+#if defined(BSP_UART8_RX_USING_DMA)
+#ifndef UART8_DMA_RX_CONFIG
+#define UART8_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART8_RX_DMA_INSTANCE,                         \
+        .channel = UART8_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART8_RX_DMA_RCC,                               \
+        .dma_irq = UART8_RX_DMA_IRQ,                               \
+    }
+#endif /* UART8_DMA_RX_CONFIG */
+#endif /* BSP_UART8_RX_USING_DMA */
+
+#if defined(BSP_UART8_TX_USING_DMA)
+#ifndef UART8_DMA_TX_CONFIG
+#define UART8_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART8_TX_DMA_INSTANCE,                         \
+        .channel = UART8_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART8_TX_DMA_RCC,                               \
+        .dma_irq = UART8_TX_DMA_IRQ,                               \
+    }
+#endif /* UART8_DMA_TX_CONFIG */
+#endif /* BSP_UART8_TX_USING_DMA */
+#endif /* BSP_USING_UART8 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

libraries/HAL_Drivers/drivers/config/f4/usbd_config.h

@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-04-10     ZYH          first version
+ * 2019-10-27     flybreak     Compatible with the HS
+ */
+#ifndef __USBD_CONFIG_H__
+#define __USBD_CONFIG_H__
+
+#include <rtconfig.h>
+
+#ifdef BSP_USBD_TYPE_HS
+#define USBD_IRQ_TYPE     OTG_HS_IRQn
+#define USBD_IRQ_HANDLER  OTG_HS_IRQHandler
+#define USBD_INSTANCE     USB_OTG_HS
+#else
+#define USBD_IRQ_TYPE     OTG_FS_IRQn
+#define USBD_IRQ_HANDLER  OTG_FS_IRQHandler
+#define USBD_INSTANCE     USB_OTG_FS
+#endif
+
+#ifdef BSP_USBD_SPEED_HS
+#define USBD_PCD_SPEED    PCD_SPEED_HIGH
+#elif  BSP_USBD_SPEED_HSINFS
+#define USBD_PCD_SPEED    PCD_SPEED_HIGH_IN_FULL
+#else
+#define USBD_PCD_SPEED    PCD_SPEED_FULL
+#endif
+
+#ifdef BSP_USBD_PHY_ULPI
+#define USBD_PCD_PHY_MODULE    PCD_PHY_ULPI
+#elif  BSP_USBD_PHY_UTMI
+#define USBD_PCD_PHY_MODULE    PCD_PHY_UTMI
+#else
+#define USBD_PCD_PHY_MODULE    PCD_PHY_EMBEDDED
+#endif
+
+#endif

libraries/HAL_Drivers/drivers/config/f7/adc_config.h

@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-06     zylx         first version
+ */
+
+#ifndef __ADC_CONFIG_H__
+#define __ADC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_ADC1
+#ifndef ADC1_CONFIG
+#define ADC1_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC1,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = DISABLE,                       \
+       .Init.EOCSelection          = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 0,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+    }
+#endif /* ADC1_CONFIG */
+#endif /* BSP_USING_ADC1 */
+
+#ifdef BSP_USING_ADC2
+#ifndef ADC2_CONFIG
+#define ADC2_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC2,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = DISABLE,                       \
+       .Init.EOCSelection          = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 0,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+    }
+#endif /* ADC2_CONFIG */
+#endif /* BSP_USING_ADC2 */
+
+#ifdef BSP_USING_ADC3
+#ifndef ADC3_CONFIG
+#define ADC3_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC3,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = DISABLE,                       \
+       .Init.EOCSelection          = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 0,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+    }
+#endif /* ADC3_CONFIG */
+#endif /* BSP_USING_ADC3 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ADC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f7/dma_config.h

@@ -0,0 +1,229 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-01-02     zylx         first version
+ * 2019-01-08     SummerGift   clean up the code
+ */
+
+#ifndef __DMA_CONFIG_H__
+#define __DMA_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* DMA1 stream0 */
+#if defined(BSP_SPI3_RX_USING_DMA) && !defined(SPI3_RX_DMA_INSTANCE)
+#define SPI3_DMA_RX_IRQHandler           DMA1_Stream0_IRQHandler
+#define SPI3_RX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_RX_DMA_INSTANCE             DMA1_Stream0
+#define SPI3_RX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_RX_DMA_IRQ                  DMA1_Stream0_IRQn
+#elif defined(BSP_UART5_RX_USING_DMA) && !defined(UART5_RX_DMA_INSTANCE)
+#define UART5_DMA_RX_IRQHandler          DMA1_Stream0_IRQHandler
+#define UART5_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART5_RX_DMA_INSTANCE            DMA1_Stream0
+#define UART5_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART5_RX_DMA_IRQ                 DMA1_Stream0_IRQn
+#endif
+
+/* DMA1 stream1 */
+#if defined(BSP_UART3_RX_USING_DMA) && !defined(UART3_RX_DMA_INSTANCE)
+#define UART3_DMA_RX_IRQHandler          DMA1_Stream1_IRQHandler
+#define UART3_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART3_RX_DMA_INSTANCE            DMA1_Stream1
+#define UART3_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART3_RX_DMA_IRQ                 DMA1_Stream1_IRQn
+#endif
+
+/* DMA1 stream2 */
+#if defined(BSP_SPI3_RX_USING_DMA) && !defined(SPI3_RX_DMA_INSTANCE)
+#define SPI3_DMA_RX_IRQHandler           DMA1_Stream2_IRQHandler
+#define SPI3_RX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_RX_DMA_INSTANCE             DMA1_Stream2
+#define SPI3_RX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_RX_DMA_IRQ                  DMA1_Stream2_IRQn
+#elif defined(BSP_UART4_RX_USING_DMA) && !defined(UART4_RX_DMA_INSTANCE)
+#define UART4_DMA_RX_IRQHandler          DMA1_Stream2_IRQHandler
+#define UART4_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART4_RX_DMA_INSTANCE            DMA1_Stream2
+#define UART4_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART4_RX_DMA_IRQ                 DMA1_Stream2_IRQn
+#endif
+
+/* DMA1 stream3 */
+#if defined(BSP_SPI2_RX_USING_DMA) && !defined(SPI2_RX_DMA_INSTANCE)
+#define SPI2_DMA_RX_IRQHandler           DMA1_Stream3_IRQHandler
+#define SPI2_RX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI2_RX_DMA_INSTANCE             DMA1_Stream3
+#define SPI2_RX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI2_RX_DMA_IRQ                  DMA1_Stream3_IRQn
+#endif
+
+/* DMA1 stream4 */
+#if defined(BSP_SPI2_TX_USING_DMA) && !defined(SPI2_TX_DMA_INSTANCE)
+#define SPI2_DMA_TX_IRQHandler           DMA1_Stream4_IRQHandler
+#define SPI2_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI2_TX_DMA_INSTANCE             DMA1_Stream4
+#define SPI2_TX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI2_TX_DMA_IRQ                  DMA1_Stream4_IRQn
+#endif
+
+
+/* DMA1 stream5 */
+#if defined(BSP_SPI3_TX_USING_DMA) && !defined(SPI3_TX_DMA_INSTANCE)
+#define SPI3_DMA_TX_IRQHandler           DMA1_Stream5_IRQHandler
+#define SPI3_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_TX_DMA_INSTANCE             DMA1_Stream5
+#define SPI3_TX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_TX_DMA_IRQ                  DMA1_Stream5_IRQn
+#elif defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
+#define UART2_DMA_RX_IRQHandler          DMA1_Stream5_IRQHandler
+#define UART2_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART2_RX_DMA_INSTANCE            DMA1_Stream5
+#define UART2_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART2_RX_DMA_IRQ                 DMA1_Stream5_IRQn
+#endif
+
+/* DMA1 stream6 */
+
+/* DMA1 stream7 */
+#if defined(BSP_SPI3_TX_USING_DMA) && !defined(SPI3_TX_DMA_INSTANCE)
+#define SPI3_DMA_TX_IRQHandler           DMA1_Stream7_IRQHandler
+#define SPI3_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_TX_DMA_INSTANCE             DMA1_Stream7
+#define SPI3_TX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_TX_DMA_IRQ                  DMA1_Stream7_IRQn
+#endif
+
+/* DMA2 stream0 */
+#if defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_IRQHandler           DMA2_Stream0_IRQHandler
+#define SPI1_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_RX_DMA_INSTANCE             DMA2_Stream0
+#define SPI1_RX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_RX_DMA_IRQ                  DMA2_Stream0_IRQn
+#elif defined(BSP_SPI4_RX_USING_DMA) && !defined(SPI4_RX_DMA_INSTANCE)
+#define SPI4_DMA_RX_IRQHandler           DMA2_Stream0_IRQHandler
+#define SPI4_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI4_RX_DMA_INSTANCE             DMA2_Stream0
+#define SPI4_RX_DMA_CHANNEL              DMA_CHANNEL_4
+#define SPI4_RX_DMA_IRQ                  DMA2_Stream0_IRQn
+#endif
+
+/* DMA2 stream1 */
+#if defined(BSP_SPI4_TX_USING_DMA) && !defined(SPI4_TX_DMA_INSTANCE)
+#define SPI4_DMA_TX_IRQHandler           DMA2_Stream1_IRQHandler
+#define SPI4_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI4_TX_DMA_INSTANCE             DMA2_Stream1
+#define SPI4_TX_DMA_CHANNEL              DMA_CHANNEL_4
+#define SPI4_TX_DMA_IRQ                  DMA2_Stream1_IRQn
+#endif
+
+/* DMA2 stream2 */
+#if defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_IRQHandler           DMA2_Stream2_IRQHandler
+#define SPI1_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_RX_DMA_INSTANCE             DMA2_Stream2
+#define SPI1_RX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_RX_DMA_IRQ                  DMA2_Stream2_IRQn
+#elif defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_DMA_RX_IRQHandler         DMA2_Stream2_IRQHandler
+#define UART1_RX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART1_RX_DMA_INSTANCE           DMA2_Stream2
+#define UART1_RX_DMA_CHANNEL            DMA_CHANNEL_4
+#define UART1_RX_DMA_IRQ                DMA2_Stream2_IRQn
+#elif defined(BSP_QSPI_USING_DMA) && !defined(QSPI_DMA_INSTANCE)
+#define QSPI_DMA_IRQHandler              DMA2_Stream2_IRQHandler
+#define QSPI_DMA_RCC                     RCC_AHB1ENR_DMA2EN
+#define QSPI_DMA_INSTANCE                DMA2_Stream2
+#define QSPI_DMA_CHANNEL                 DMA_CHANNEL_11
+#define QSPI_DMA_IRQ                     DMA2_Stream2_IRQn
+#endif
+
+/* DMA2 stream3 */
+#if defined(BSP_SPI5_RX_USING_DMA) && !defined(SPI5_RX_DMA_INSTANCE)
+#define SPI5_DMA_RX_IRQHandler           DMA2_Stream3_IRQHandler
+#define SPI5_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_RX_DMA_INSTANCE             DMA2_Stream3
+#define SPI5_RX_DMA_CHANNEL              DMA_CHANNEL_2
+#define SPI5_RX_DMA_IRQ                  DMA2_Stream3_IRQn
+#elif defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_TX_IRQHandler           DMA2_Stream3_IRQHandler
+#define SPI1_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_TX_DMA_INSTANCE             DMA2_Stream3
+#define SPI1_TX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_TX_DMA_IRQ                  DMA2_Stream3_IRQn
+#elif defined(BSP_SPI4_RX_USING_DMA) && !defined(SPI4_RX_DMA_INSTANCE)
+#define SPI4_DMA_RX_IRQHandler           DMA2_Stream3_IRQHandler
+#define SPI4_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI4_RX_DMA_INSTANCE             DMA2_Stream3
+#define SPI4_RX_DMA_CHANNEL              DMA_CHANNEL_5
+#define SPI4_RX_DMA_IRQ                  DMA2_Stream3_IRQn
+#endif
+
+/* DMA2 stream4 */
+#if defined(BSP_SPI5_TX_USING_DMA) && !defined(SPI5_TX_DMA_INSTANCE)
+#define SPI5_DMA_TX_IRQHandler           DMA2_Stream4_IRQHandler
+#define SPI5_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_TX_DMA_INSTANCE             DMA2_Stream4
+#define SPI5_TX_DMA_CHANNEL              DMA_CHANNEL_2
+#define SPI5_TX_DMA_IRQ                  DMA2_Stream4_IRQn
+#elif defined(BSP_SPI4_TX_USING_DMA) && !defined(SPI4_TX_DMA_INSTANCE)
+#define SPI4_DMA_TX_IRQHandler           DMA2_Stream4_IRQHandler
+#define SPI4_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI4_TX_DMA_INSTANCE             DMA2_Stream4
+#define SPI4_TX_DMA_CHANNEL              DMA_CHANNEL_5
+#define SPI4_TX_DMA_IRQ                  DMA2_Stream4_IRQn
+#endif
+
+/* DMA2 stream5 */
+#if defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_TX_IRQHandler           DMA2_Stream5_IRQHandler
+#define SPI1_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_TX_DMA_INSTANCE             DMA2_Stream5
+#define SPI1_TX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_TX_DMA_IRQ                  DMA2_Stream5_IRQn
+#elif defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_DMA_RX_IRQHandler         DMA2_Stream5_IRQHandler
+#define UART1_RX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART1_RX_DMA_INSTANCE           DMA2_Stream5
+#define UART1_RX_DMA_CHANNEL            DMA_CHANNEL_4
+#define UART1_RX_DMA_IRQ                DMA2_Stream5_IRQn
+#elif defined(BSP_SPI5_RX_USING_DMA) && !defined(SPI5_RX_DMA_INSTANCE)
+#define SPI5_DMA_RX_IRQHandler           DMA2_Stream5_IRQHandler
+#define SPI5_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_RX_DMA_INSTANCE             DMA2_Stream5
+#define SPI5_RX_DMA_CHANNEL              DMA_CHANNEL_7
+#define SPI5_RX_DMA_IRQ                  DMA2_Stream5_IRQn
+#endif
+
+/* DMA2 stream6 */
+#if defined(BSP_SPI5_TX_USING_DMA) && !defined(SPI5_TX_DMA_INSTANCE)
+#define SPI5_DMA_TX_IRQHandler           DMA2_Stream6_IRQHandler
+#define SPI5_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_TX_DMA_INSTANCE             DMA2_Stream6
+#define SPI5_TX_DMA_CHANNEL              DMA_CHANNEL_7
+#define SPI5_TX_DMA_IRQ                  DMA2_Stream6_IRQn
+#endif
+
+/* DMA2 stream7 */
+#if defined(BSP_QSPI_USING_DMA) && !defined(QSPI_DMA_INSTANCE)
+#define QSPI_DMA_IRQHandler              DMA2_Stream7_IRQHandler
+#define QSPI_DMA_RCC                     RCC_AHB1ENR_DMA2EN
+#define QSPI_DMA_INSTANCE                DMA2_Stream7
+#define QSPI_DMA_CHANNEL                 DMA_CHANNEL_3
+#define QSPI_DMA_IRQ                     DMA2_Stream7_IRQn
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DMA_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f7/pwm_config.h

@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     zylx         first version
+ * 2023-04-08     Wangyuqiang  complete PWM defination
+ */
+
+#ifndef __PWM_CONFIG_H__
+#define __PWM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PWM1
+#define PWM1_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM1,         \
+       .name                    = "pwm1",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM1 */
+
+#ifdef BSP_USING_PWM2
+#define PWM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .name                    = "pwm2",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM2 */
+
+#ifdef BSP_USING_PWM3
+#define PWM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .name                    = "pwm3",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM3 */
+
+#ifdef BSP_USING_PWM4
+#define PWM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .name                    = "pwm4",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM4 */
+
+#ifdef BSP_USING_PWM5
+#define PWM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .name                    = "pwm5",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM5 */
+
+#ifdef BSP_USING_PWM6
+#define PWM6_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM6,         \
+       .name                    = "pwm6",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM6 */
+
+#ifdef BSP_USING_PWM7
+#define PWM7_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM7,         \
+       .name                    = "pwm7",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM7 */
+
+#ifdef BSP_USING_PWM8
+#define PWM8_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM8,         \
+       .name                    = "pwm8",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM8 */
+
+#ifdef BSP_USING_PWM9
+#define PWM9_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM9,         \
+       .name                    = "pwm9",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM9 */
+
+#ifdef BSP_USING_PWM10
+#define PWM10_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM10,        \
+       .name                    = "pwm10",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM10 */
+
+#ifdef BSP_USING_PWM11
+#define PWM11_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM11,        \
+       .name                    = "pwm11",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM11 */
+
+#ifdef BSP_USING_PWM12
+#define PWM12_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM12,        \
+       .name                    = "pwm12",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM12 */
+
+#ifdef BSP_USING_PWM13
+#define PWM13_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM13,        \
+       .name                    = "pwm13",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM13 */
+
+#ifdef BSP_USING_PWM14
+#define PWM14_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM14,        \
+       .name                    = "pwm14",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM14 */
+
+#ifdef BSP_USING_PWM15
+#define PWM15_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM15,        \
+       .name                    = "pwm15",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM15 */
+
+#ifdef BSP_USING_PWM16
+#define PWM16_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM16,        \
+       .name                    = "pwm16",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM16 */
+
+#ifdef BSP_USING_PWM17
+#define PWM17_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM17,        \
+       .name                    = "pwm17",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM17 */
+
+#ifdef BSP_USING_PWM18
+#define PWM18_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM18,        \
+       .name                    = "pwm18",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM18 */
+
+#ifdef BSP_USING_PWM19
+#define PWM19_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM19,        \
+       .name                    = "pwm19",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM19 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PWM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f7/qspi_config.h

@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-22     zylx         first version
+ */
+
+#ifndef __QSPI_CONFIG_H__
+#define __QSPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_QSPI
+#ifndef QSPI_BUS_CONFIG
+#define QSPI_BUS_CONFIG                                        \
+    {                                                          \
+        .Instance = QUADSPI,                                   \
+        .Init.FifoThreshold = 4,                               \
+        .Init.SampleShifting = QSPI_SAMPLE_SHIFTING_HALFCYCLE, \
+        .Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_4_CYCLE,  \
+    }
+#endif /* QSPI_BUS_CONFIG */
+#endif /* BSP_USING_QSPI */
+
+#ifdef BSP_QSPI_USING_DMA
+#ifndef QSPI_DMA_CONFIG
+#define QSPI_DMA_CONFIG                                        \
+    {                                                          \
+        .Instance = QSPI_DMA_INSTANCE,                         \
+        .Init.Channel  = QSPI_DMA_CHANNEL,                     \
+        .Init.Direction = DMA_PERIPH_TO_MEMORY,                \
+        .Init.PeriphInc = DMA_PINC_DISABLE,                    \
+        .Init.MemInc = DMA_MINC_ENABLE,                        \
+        .Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE,       \
+        .Init.MemDataAlignment = DMA_MDATAALIGN_BYTE,          \
+        .Init.Mode = DMA_NORMAL,                               \
+        .Init.Priority = DMA_PRIORITY_LOW                      \
+    }
+#endif /* QSPI_DMA_CONFIG */
+#endif /* BSP_QSPI_USING_DMA */
+
+#define QSPI_IRQn                   QUADSPI_IRQn
+#define QSPI_IRQHandler             QUADSPI_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __QSPI_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f7/sdio_config.h

@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     BalanceTWK   first version
+ */
+
+#ifndef __SDIO_CONFIG_H__
+#define __SDIO_CONFIG_H__
+
+#include <rtthread.h>
+#include "stm32f7xx_hal.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SDIO
+#define SDIO_BUS_CONFIG                                  \
+    {                                                    \
+        .Instance = SDMMC1,                              \
+        .dma_rx.dma_rcc = RCC_AHB1ENR_DMA2EN,            \
+        .dma_tx.dma_rcc = RCC_AHB1ENR_DMA2EN,            \
+        .dma_rx.Instance = DMA2_Stream3,                 \
+        .dma_rx.channel = DMA_CHANNEL_4,                 \
+        .dma_rx.dma_irq = DMA2_Stream3_IRQn,             \
+        .dma_tx.Instance = DMA2_Stream6,                 \
+        .dma_tx.channel = DMA_CHANNEL_4,                 \
+        .dma_tx.dma_irq = DMA2_Stream6_IRQn,             \
+    }
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SDIO_CONFIG_H__ */
+
+
+

libraries/HAL_Drivers/drivers/config/f7/spi_config.h

@@ -0,0 +1,199 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ */
+
+#ifndef __SPI_CONFIG_H__
+#define __SPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SPI1
+#ifndef SPI1_BUS_CONFIG
+#define SPI1_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI1,                           \
+        .bus_name = "spi1",                         \
+        .irq_type = SPI1_IRQn,                      \
+    }
+#endif /* SPI1_BUS_CONFIG */
+#endif /* BSP_USING_SPI1 */
+
+#ifdef BSP_SPI1_TX_USING_DMA
+#ifndef SPI1_TX_DMA_CONFIG
+#define SPI1_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_TX_DMA_RCC,                 \
+        .Instance = SPI1_TX_DMA_INSTANCE,           \
+        .channel = SPI1_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI1_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_TX_DMA_CONFIG */
+#endif /* BSP_SPI1_TX_USING_DMA */
+
+#ifdef BSP_SPI1_RX_USING_DMA
+#ifndef SPI1_RX_DMA_CONFIG
+#define SPI1_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_RX_DMA_RCC,                 \
+        .Instance = SPI1_RX_DMA_INSTANCE,           \
+        .channel = SPI1_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI1_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_RX_DMA_CONFIG */
+#endif /* BSP_SPI1_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI2
+#ifndef SPI2_BUS_CONFIG
+#define SPI2_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI2,                           \
+        .bus_name = "spi2",                         \
+        .irq_type = SPI2_IRQn,                      \
+    }
+#endif /* SPI2_BUS_CONFIG */
+#endif /* BSP_USING_SPI2 */
+
+#ifdef BSP_SPI2_TX_USING_DMA
+#ifndef SPI2_TX_DMA_CONFIG
+#define SPI2_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI2_TX_DMA_RCC,                 \
+        .Instance = SPI2_TX_DMA_INSTANCE,           \
+        .channel = SPI2_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI2_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI2_TX_DMA_CONFIG */
+#endif /* BSP_SPI2_TX_USING_DMA */
+
+#ifdef BSP_SPI2_RX_USING_DMA
+#ifndef SPI2_RX_DMA_CONFIG
+#define SPI2_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI2_RX_DMA_RCC,                 \
+        .Instance = SPI2_RX_DMA_INSTANCE,           \
+        .channel = SPI2_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI2_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI2_RX_DMA_CONFIG */
+#endif /* BSP_SPI2_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI3
+#ifndef SPI3_BUS_CONFIG
+#define SPI3_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI3,                           \
+        .bus_name = "spi3",                         \
+        .irq_type = SPI3_IRQn,                      \
+    }
+#endif /* SPI3_BUS_CONFIG */
+#endif /* BSP_USING_SPI3 */
+
+#ifdef BSP_SPI3_TX_USING_DMA
+#ifndef SPI3_TX_DMA_CONFIG
+#define SPI3_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI3_TX_DMA_RCC,                 \
+        .Instance = SPI3_TX_DMA_INSTANCE,           \
+        .channel = SPI3_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI3_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI3_TX_DMA_CONFIG */
+#endif /* BSP_SPI3_TX_USING_DMA */
+
+#ifdef BSP_SPI3_RX_USING_DMA
+#ifndef SPI3_RX_DMA_CONFIG
+#define SPI3_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI3_RX_DMA_RCC,                 \
+        .Instance = SPI3_RX_DMA_INSTANCE,           \
+        .channel = SPI3_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI3_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI3_RX_DMA_CONFIG */
+#endif /* BSP_SPI3_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI4
+#ifndef SPI4_BUS_CONFIG
+#define SPI4_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI4,                           \
+        .bus_name = "spi4",                         \
+        .irq_type = SPI4_IRQn,                      \
+    }
+#endif /* SPI4_BUS_CONFIG */
+#endif /* BSP_USING_SPI4 */
+
+#ifdef BSP_SPI4_TX_USING_DMA
+#ifndef SPI4_TX_DMA_CONFIG
+#define SPI4_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI4_TX_DMA_RCC,                 \
+        .Instance = SPI4_TX_DMA_INSTANCE,           \
+        .channel = SPI4_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI4_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI4_TX_DMA_CONFIG */
+#endif /* BSP_SPI4_TX_USING_DMA */
+
+#ifdef BSP_SPI4_RX_USING_DMA
+#ifndef SPI4_RX_DMA_CONFIG
+#define SPI4_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI4_RX_DMA_RCC,                 \
+        .Instance = SPI4_RX_DMA_INSTANCE,           \
+        .channel = SPI4_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI4_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI4_RX_DMA_CONFIG */
+#endif /* BSP_SPI4_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI5
+#ifndef SPI5_BUS_CONFIG
+#define SPI5_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI5,                           \
+        .bus_name = "spi5",                         \
+        .irq_type = SPI5_IRQn,                      \
+    }
+#endif /* SPI5_BUS_CONFIG */
+#endif /* BSP_USING_SPI5 */
+
+#ifdef BSP_SPI5_TX_USING_DMA
+#ifndef SPI5_TX_DMA_CONFIG
+#define SPI5_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI5_TX_DMA_RCC,                 \
+        .Instance = SPI5_TX_DMA_INSTANCE,           \
+        .channel = SPI5_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI5_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI5_TX_DMA_CONFIG */
+#endif /* BSP_SPI5_TX_USING_DMA */
+
+#ifdef BSP_SPI5_RX_USING_DMA
+#ifndef SPI5_RX_DMA_CONFIG
+#define SPI5_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI5_RX_DMA_RCC,                 \
+        .Instance = SPI5_RX_DMA_INSTANCE,           \
+        .channel = SPI5_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI5_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI5_RX_DMA_CONFIG */
+#endif /* BSP_SPI5_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SPI_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f7/tim_config.h

@@ -0,0 +1,67 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-11     zylx         first version
+ */
+
+#ifndef __TIM_CONFIG_H__
+#define __TIM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef TIM_DEV_INFO_CONFIG
+#define TIM_DEV_INFO_CONFIG                     \
+    {                                           \
+        .maxfreq = 1000000,                     \
+        .minfreq = 3000,                        \
+        .maxcnt  = 0xFFFF,                      \
+        .cntmode = HWTIMER_CNTMODE_UP,          \
+    }
+#endif /* TIM_DEV_INFO_CONFIG */
+
+#ifdef BSP_USING_TIM11
+#ifndef TIM11_CONFIG
+#define TIM11_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM11,                    \
+       .tim_irqn                = TIM1_TRG_COM_TIM11_IRQn,  \
+       .name                    = "timer11",                \
+    }
+#endif /* TIM11_CONFIG */
+#endif /* BSP_USING_TIM11 */
+
+#ifdef BSP_USING_TIM13
+#ifndef TIM13_CONFIG
+#define TIM13_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM13,                    \
+       .tim_irqn                = TIM8_UP_TIM13_IRQn,       \
+       .name                    = "timer13",                \
+    }
+#endif /* TIM13_CONFIG */
+#endif /* BSP_USING_TIM13 */
+
+#ifdef BSP_USING_TIM14
+#ifndef TIM14_CONFIG
+#define TIM14_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM14,                    \
+       .tim_irqn                = TIM8_TRG_COM_TIM14_IRQn,  \
+       .name                    = "timer14",                \
+    }
+#endif /* TIM14_CONFIG */
+#endif /* BSP_USING_TIM14 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/f7/uart_config.h

@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-10-30     SummerGift   first version
+ * 2019-01-05     zylx         modify dma support
+ */
+
+#ifndef __UART_CONFIG_H__
+#define __UART_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_USING_UART1)
+#ifndef UART1_CONFIG
+#define UART1_CONFIG                                                \
+    {                                                               \
+        .name = "uart1",                                            \
+        .Instance = USART1,                                         \
+        .irq_type = USART1_IRQn,                                    \
+    }
+#endif /* UART1_CONFIG */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_UART1_RX_USING_DMA)
+#ifndef UART1_DMA_RX_CONFIG
+#define UART1_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART1_RX_DMA_INSTANCE,                         \
+        .channel = UART1_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART1_RX_DMA_RCC,                               \
+        .dma_irq = UART1_RX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_RX_CONFIG */
+#endif /* BSP_UART1_RX_USING_DMA */
+
+#if defined(BSP_USING_UART2)
+#ifndef UART2_CONFIG
+#define UART2_CONFIG                                                \
+    {                                                               \
+        .name = "uart2",                                            \
+        .Instance = USART2,                                         \
+        .irq_type = USART2_IRQn,                                    \
+    }
+#endif /* UART2_CONFIG */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_UART2_RX_USING_DMA)
+#ifndef UART2_DMA_RX_CONFIG
+#define UART2_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART2_RX_DMA_INSTANCE,                         \
+        .channel = UART2_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART2_RX_DMA_RCC,                               \
+        .dma_irq = UART2_RX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_RX_CONFIG */
+#endif /* BSP_UART2_RX_USING_DMA */
+
+#if defined(BSP_USING_UART3)
+#ifndef UART3_CONFIG
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_IRQn,                                    \
+    }
+#endif /* UART3_CONFIG */
+#endif /* BSP_USING_UART3 */
+
+#if defined(BSP_UART3_RX_USING_DMA)
+#ifndef UART3_DMA_RX_CONFIG
+#define UART3_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART3_RX_DMA_INSTANCE,                         \
+        .channel = UART3_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART3_RX_DMA_RCC,                               \
+        .dma_irq = UART3_RX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_RX_CONFIG */
+#endif /* BSP_UART3_RX_USING_DMA */
+
+#if defined(BSP_USING_UART4)
+#ifndef UART4_CONFIG
+#define UART4_CONFIG                                                \
+    {                                                               \
+        .name = "uart4",                                            \
+        .Instance = UART4,                                          \
+        .irq_type = UART4_IRQn,                                     \
+    }
+#endif /* UART4_CONFIG */
+#endif /* BSP_USING_UART4 */
+
+#if defined(BSP_UART4_RX_USING_DMA)
+#ifndef UART4_DMA_RX_CONFIG
+#define UART4_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART4_RX_DMA_INSTANCE,                         \
+        .channel = UART4_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART4_RX_DMA_RCC,                               \
+        .dma_irq = UART4_RX_DMA_IRQ,                               \
+    }
+#endif /* UART4_DMA_RX_CONFIG */
+#endif /* BSP_UART4_RX_USING_DMA */
+
+#if defined(BSP_USING_UART5)
+#ifndef UART5_CONFIG
+#define UART5_CONFIG                                                \
+    {                                                               \
+        .name = "uart5",                                            \
+        .Instance = UART5,                                          \
+        .irq_type = UART5_IRQn,                                     \
+    }
+#endif /* UART5_CONFIG */
+#endif /* BSP_USING_UART5 */
+
+#if defined(BSP_UART5_RX_USING_DMA)
+#ifndef UART5_DMA_RX_CONFIG
+#define UART5_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART5_RX_DMA_INSTANCE,                         \
+        .channel = UART5_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART5_RX_DMA_RCC,                               \
+        .dma_irq = UART5_RX_DMA_IRQ,                               \
+    }
+#endif /* UART5_DMA_RX_CONFIG */
+#endif /* BSP_UART5_RX_USING_DMA */
+
+#if defined(BSP_USING_UART6)
+#ifndef UART6_CONFIG
+#define UART6_CONFIG                                                \
+    {                                                               \
+        .name = "uart6",                                            \
+        .Instance = USART6,                                          \
+        .irq_type = USART6_IRQn,                                     \
+    }
+#endif /* UART6_CONFIG */
+#endif /* BSP_USING_UART6 */
+
+#if defined(BSP_UART6_RX_USING_DMA)
+#ifndef UART6_DMA_RX_CONFIG
+#define UART6_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART6_RX_DMA_INSTANCE,                         \
+        .channel = UART6_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART6_RX_DMA_RCC,                               \
+        .dma_irq = UART6_RX_DMA_IRQ,                               \
+    }
+#endif /* UART6_DMA_RX_CONFIG */
+#endif /* BSP_UART6_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

libraries/HAL_Drivers/drivers/config/g0/adc_config.h

@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-01-05     zylx         first version
+ * 2019-01-08     SummerGift   clean up the code
+ */
+
+#ifndef __ADC_CONFIG_H__
+#define __ADC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_ADC1
+#ifndef ADC1_CONFIG
+#define ADC1_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC1,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_ASYNC_DIV1,          \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = ADC_SCAN_DIRECTION_FORWARD,    \
+       .Init.EOCSelection          = ADC_EOC_SINGLE_CONV,           \
+       .Init.LowPowerAutoWait      = DISABLE,                       \
+       .Init.LowPowerAutoPowerOff  = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.DiscontinuousConvMode = ENABLE,                        \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+       .Init.DMAContinuousRequests = ENABLE,                        \
+       .Init.Overrun               = ADC_OVR_DATA_OVERWRITTEN,      \
+    }
+#endif /* ADC1_CONFIG */
+#endif /* BSP_USING_ADC1 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ADC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/g0/dma_config.h

@@ -0,0 +1,125 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-01-05     zylx         first version
+ * 2019-01-08     SummerGift   clean up the code
+ */
+
+#ifndef __DMA_CONFIG_H__
+#define __DMA_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(STM32G030xx) || defined(STM32G031xx) || defined(STM32G041xx)
+#define DMA_Channelx_IRQn               DMA1_Ch4_5_DMAMUX1_OVR_IRQn
+#define DMA_Channelx_IRQHandler         DMA1_Ch4_5_DMAMUX1_OVR_IRQHandler
+#elif defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined(STM32G0C1xx)
+#define DMA_Channelx_IRQn               DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn
+#define DMA_Channelx_IRQHandler         DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQHandler
+#else
+#define DMA_Channelx_IRQn               DMA1_Ch4_7_DMAMUX1_OVR_IRQn
+#define DMA_Channelx_IRQHandler         DMA1_Ch4_7_DMAMUX1_OVR_IRQHandler
+#endif
+
+/* DMA1 channel2  */
+#if defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_TX_IRQHandler       DMA1_Channel2_3_IRQHandler
+#define SPI1_RX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI1_RX_DMA_INSTANCE            DMA1_Channel2
+#define SPI1_RX_DMA_REQUEST             DMA_REQUEST_SPI1_RX
+#define SPI1_RX_DMA_IRQ                 DMA1_Channel2_3_IRQn
+#elif defined(BSP_SPI2_RX_USING_DMA) && !defined(SPI2_RX_DMA_INSTANCE)
+#define SPI2_DMA_RX_TX_IRQHandler       DMA1_Channel2_3_IRQHandler
+#define SPI2_RX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI2_RX_DMA_INSTANCE            DMA1_Channel2
+#define SPI2_RX_DMA_REQUEST             DMA_REQUEST_SPI2_RX
+#define SPI2_RX_DMA_IRQ                 DMA1_Channel2_3_IRQn
+#endif
+
+/* DMA1 channle3 */
+#if defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_RX_TX_IRQHandler       DMA1_Channel2_3_IRQHandler
+#define SPI1_TX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI1_TX_DMA_INSTANCE            DMA1_Channel3
+#define SPI1_TX_DMA_REQUEST             DMA_REQUEST_SPI1_TX
+#define SPI1_TX_DMA_IRQ                 DMA1_Channel2_3_IRQn
+#elif defined(BSP_SPI2_TX_USING_DMA) && !defined(SPI2_TX_DMA_INSTANCE)
+#define SPI2_DMA_RX_TX_IRQHandler       DMA1_Channel2_3_IRQHandler
+#define SPI2_TX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI2_TX_DMA_INSTANCE            DMA1_Channel3
+#define SPI2_TX_DMA_REQUEST             DMA_REQUEST_SPI2_TX
+#define SPI2_TX_DMA_IRQ                 DMA1_Channel2_3_IRQn
+#endif
+
+/* DMA1 channle4 */
+#if defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART_DMA_RX_TX_IRQHandler       DMA_Channelx_IRQHandler
+#define UART1_RX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART1_RX_DMA_INSTANCE           DMA1_Channel4
+#define UART1_RX_DMA_REQUEST            DMA_REQUEST_USART1_RX
+#define UART1_RX_DMA_IRQ                DMA_Channelx_IRQn
+#elif defined(BSP_SPI2_RX_USING_DMA) && !defined(SPI2_RX_DMA_INSTANCE)
+#define SPI2_DMA_RX_TX_IRQHandler       DMA_Channelx_IRQHandler
+#define SPI2_RX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI2_RX_DMA_INSTANCE            DMA1_Channel4
+#define SPI2_RX_DMA_REQUEST             DMA_REQUEST_SPI2_RX
+#define SPI2_RX_DMA_IRQ                 DMA_Channelx_IRQn
+#endif
+
+/* DMA1 channle5 */
+#if defined(BSP_UART1_TX_USING_DMA) && !defined(UART1_TX_DMA_INSTANCE)
+#define UART_DMA_RX_TX_IRQHandler       DMA_Channelx_IRQHandler
+#define UART1_TX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART1_TX_DMA_INSTANCE           DMA1_Channel5
+#define UART1_TX_DMA_REQUEST            DMA_REQUEST_USART1_TX
+#define UART1_TX_DMA_IRQ                DMA_Channelx_IRQn
+#elif defined(BSP_SPI2_TX_USING_DMA) && !defined(SPI2_TX_DMA_INSTANCE)
+#define SPI2_DMA_RX_TX_IRQHandler       DMA_Channelx_IRQHandler
+#define SPI2_TX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI2_TX_DMA_INSTANCE            DMA1_Channel5
+#define SPI2_TX_DMA_REQUEST             DMA_REQUEST_SPI2_TX
+#define SPI2_TX_DMA_IRQ                 DMA_Channelx_IRQn
+#endif
+
+#if !(defined(STM32G030xx) || defined(STM32G031xx) || defined(STM32G041xx))
+/* DMA1 channle6 */
+#if defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
+#define UART_DMA_RX_TX_IRQHandler       DMA_Channelx_IRQHandler
+#define UART2_RX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART2_RX_DMA_INSTANCE           DMA1_Channel6
+#define UART2_RX_DMA_REQUEST            DMA_REQUEST_USART2_RX
+#define UART2_RX_DMA_IRQ                DMA_Channelx_IRQn
+#endif
+
+/* DMA1 channle7 */
+#if defined(BSP_UART2_TX_USING_DMA) && !defined(UART2_TX_DMA_INSTANCE)
+#define UART_DMA_RX_TX_IRQHandler       DMA_Channelx_IRQHandler
+#define UART2_TX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART2_TX_DMA_INSTANCE           DMA1_Channel7
+#define UART2_TX_DMA_REQUEST            DMA_REQUEST_USART2_TX
+#define UART2_TX_DMA_IRQ                DMA_Channelx_IRQn
+#endif
+#endif
+
+/* DMA1 channle1 */
+#if defined(BSP_LPUART1_RX_USING_DMA) && !defined(LPUART1_RX_DMA_INSTANCE)
+#define LPUART1_DMA_RX_IRQHandler       DMA1_Channel1_IRQHandler
+#define LPUART1_RX_DMA_RCC              RCC_AHBENR_DMA1EN
+#define LPUART1_RX_DMA_INSTANCE         DMA1_Channel1
+#define LPUART1_RX_DMA_REQUEST          DMA_REQUEST_LPUART1_RX
+#define LPUART1_RX_DMA_IRQ              DMA1_Channel1_IRQn
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DMA_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/g0/pwm_config.h

@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-01-05     zylx         first version
+ * 2019-01-08     SummerGift   clean up the code
+ * 2023-04-08     Wangyuqiang  complete PWM defination
+ */
+
+#ifndef __PWM_CONFIG_H__
+#define __PWM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PWM1
+#define PWM1_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM1,         \
+       .name                    = "pwm1",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM1 */
+
+#ifdef BSP_USING_PWM2
+#define PWM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .name                    = "pwm2",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM2 */
+
+#ifdef BSP_USING_PWM3
+#define PWM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .name                    = "pwm3",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM3 */
+
+#ifdef BSP_USING_PWM4
+#define PWM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .name                    = "pwm4",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM4 */
+
+#ifdef BSP_USING_PWM5
+#define PWM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .name                    = "pwm5",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM5 */
+
+#ifdef BSP_USING_PWM6
+#define PWM6_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM6,         \
+       .name                    = "pwm6",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM6 */
+
+#ifdef BSP_USING_PWM7
+#define PWM7_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM7,         \
+       .name                    = "pwm7",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM7 */
+
+#ifdef BSP_USING_PWM8
+#define PWM8_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM8,         \
+       .name                    = "pwm8",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM8 */
+
+#ifdef BSP_USING_PWM9
+#define PWM9_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM9,         \
+       .name                    = "pwm9",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM9 */
+
+#ifdef BSP_USING_PWM10
+#define PWM10_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM10,        \
+       .name                    = "pwm10",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM10 */
+
+#ifdef BSP_USING_PWM11
+#define PWM11_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM11,        \
+       .name                    = "pwm11",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM11 */
+
+#ifdef BSP_USING_PWM12
+#define PWM12_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM12,        \
+       .name                    = "pwm12",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM12 */
+
+#ifdef BSP_USING_PWM13
+#define PWM13_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM13,        \
+       .name                    = "pwm13",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM13 */
+
+#ifdef BSP_USING_PWM14
+#define PWM14_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM14,        \
+       .name                    = "pwm14",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM14 */
+
+#ifdef BSP_USING_PWM15
+#define PWM15_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM15,        \
+       .name                    = "pwm15",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM15 */
+
+#ifdef BSP_USING_PWM16
+#define PWM16_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM16,        \
+       .name                    = "pwm16",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM16 */
+
+#ifdef BSP_USING_PWM17
+#define PWM17_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM17,        \
+       .name                    = "pwm17",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM17 */
+
+#ifdef BSP_USING_PWM18
+#define PWM18_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM18,        \
+       .name                    = "pwm18",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM18 */
+
+#ifdef BSP_USING_PWM19
+#define PWM19_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM19,        \
+       .name                    = "pwm19",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM19 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PWM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/g0/spi_config.h

@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-01-05     zylx         first version
+ * 2019-01-08     SummerGift   clean up the code
+ */
+
+#ifndef __SPI_CONFIG_H__
+#define __SPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SPI1
+#ifndef SPI1_BUS_CONFIG
+#define SPI1_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI1,                           \
+        .bus_name = "spi1",                         \
+        .irq_type = SPI1_IRQn,                      \
+    }
+#endif /* SPI1_BUS_CONFIG */
+#endif /* BSP_USING_SPI1 */
+
+#ifdef BSP_SPI1_TX_USING_DMA
+#ifndef SPI1_TX_DMA_CONFIG
+#define SPI1_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_TX_DMA_RCC,                 \
+        .Instance = SPI1_TX_DMA_INSTANCE,           \
+        .request = SPI1_TX_DMA_REQUEST,             \
+        .dma_irq = SPI1_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_TX_DMA_CONFIG */
+#endif /* BSP_SPI1_TX_USING_DMA */
+
+#ifdef BSP_SPI1_RX_USING_DMA
+#ifndef SPI1_RX_DMA_CONFIG
+#define SPI1_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_RX_DMA_RCC,                 \
+        .Instance = SPI1_RX_DMA_INSTANCE,           \
+        .request = SPI1_RX_DMA_REQUEST,             \
+        .dma_irq = SPI1_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_RX_DMA_CONFIG */
+#endif /* BSP_SPI1_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI2
+#ifndef SPI2_BUS_CONFIG
+#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined(STM32G0C1xx)
+#define SPI2_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI2,                           \
+        .bus_name = "spi2",                         \
+        .irq_type = SPI2_3_IRQn,                    \
+    }
+#else
+#define SPI2_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI2,                           \
+        .bus_name = "spi2",                         \
+        .irq_type = SPI2_IRQn,                      \
+    }
+#endif /* defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined(STM32G0C1xx) */
+#endif /* SPI2_BUS_CONFIG */
+#endif /* BSP_USING_SPI2 */
+
+#ifdef BSP_SPI2_TX_USING_DMA
+#ifndef SPI2_TX_DMA_CONFIG
+#define SPI2_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI2_TX_DMA_RCC,                 \
+        .Instance = SPI2_TX_DMA_INSTANCE,           \
+        .request = SPI2_TX_DMA_REQUEST,             \
+        .dma_irq = SPI2_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI2_TX_DMA_CONFIG */
+#endif /* BSP_SPI2_TX_USING_DMA */
+
+#ifdef BSP_SPI2_RX_USING_DMA
+#ifndef SPI2_RX_DMA_CONFIG
+#define SPI2_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI2_RX_DMA_RCC,                 \
+        .Instance = SPI2_RX_DMA_INSTANCE,           \
+        .request = SPI2_RX_DMA_REQUEST,             \
+        .dma_irq = SPI2_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI2_RX_DMA_CONFIG */
+#endif /* BSP_SPI2_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SPI_CONFIG_H__ */
+
+
+

libraries/HAL_Drivers/drivers/config/g0/tim_config.h

@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-01-05     zylx         first version
+ * 2019-01-08     SummerGift   clean up the code
+ */
+
+#ifndef __TIM_CONFIG_H__
+#define __TIM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef TIM_DEV_INFO_CONFIG
+#define TIM_DEV_INFO_CONFIG                     \
+    {                                           \
+        .maxfreq = 1000000,                     \
+        .minfreq = 2000,                        \
+        .maxcnt  = 0xFFFF,                      \
+        .cntmode = HWTIMER_CNTMODE_UP,          \
+    }
+#endif /* TIM_DEV_INFO_CONFIG */
+
+#ifdef BSP_USING_TIM2
+#ifndef TIM2_CONFIG
+#define TIM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .tim_irqn                = TIM2_IRQn,    \
+       .name                    = "timer2",     \
+    }
+#endif /* TIM2_CONFIG */
+#endif /* BSP_USING_TIM2 */
+
+#ifdef BSP_USING_TIM3
+#ifndef TIM3_CONFIG
+#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined(STM32G0C1xx)
+#define TIM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .tim_irqn                = TIM3_TIM4_IRQn, \
+       .name                    = "timer3",     \
+    }
+#else
+#define TIM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .tim_irqn                = TIM3_IRQn,    \
+       .name                    = "timer3",     \
+    }
+#endif /* defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined(STM32G0C1xx) */
+#endif /* TIM3_CONFIG */
+#endif /* BSP_USING_TIM3 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/g0/uart_config.h

@@ -0,0 +1,276 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-10-30     zylx         first version
+ */
+
+#ifndef __UART_CONFIG_H__
+#define __UART_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_USING_LPUART1)
+#ifndef LPUART1_CONFIG
+#if defined(STM32G071xx) || defined(STM32G081xx)
+#define LPUART1_CONFIG                                              \
+    {                                                               \
+        .name = "lpuart1",                                          \
+        .Instance = LPUART1,                                        \
+        .irq_type = USART3_4_LPUART1_IRQn,                          \
+    }
+#elif defined(STM32G0B1xx) || defined(STM32G0C1xx)
+#define LPUART1_CONFIG                                              \
+    {                                                               \
+        .name = "lpuart1",                                          \
+        .Instance = LPUART1,                                        \
+        .irq_type = USART3_4_5_6_LPUART1_IRQn,                      \
+    }
+#endif /* defined(STM32G071xx) || defined(STM32G081xx) */
+#endif /* LPUART1_CONFIG */
+#if defined(BSP_LPUART1_RX_USING_DMA)
+#ifndef LPUART1_DMA_CONFIG
+#define LPUART1_DMA_CONFIG                                          \
+    {                                                               \
+        .Instance = LPUART1_RX_DMA_INSTANCE,                        \
+        .request =  LPUART1_RX_DMA_REQUEST,                         \
+        .dma_rcc  = LPUART1_RX_DMA_RCC,                             \
+        .dma_irq  = LPUART1_RX_DMA_IRQ,                             \
+    }
+#endif /* LPUART1_DMA_CONFIG */
+#endif /* BSP_LPUART1_RX_USING_DMA */
+#endif /* BSP_USING_LPUART1 */
+
+#if defined(BSP_USING_UART1)
+#ifndef UART1_CONFIG
+#define UART1_CONFIG                                                \
+    {                                                               \
+        .name = "uart1",                                            \
+        .Instance = USART1,                                         \
+        .irq_type = USART1_IRQn,                                    \
+    }
+#endif /* UART1_CONFIG */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_UART1_RX_USING_DMA)
+#ifndef UART1_DMA_RX_CONFIG
+#define UART1_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART1_RX_DMA_INSTANCE,                          \
+        .request =  UART1_RX_DMA_REQUEST,                           \
+        .dma_rcc  = UART1_RX_DMA_RCC,                               \
+        .dma_irq  = UART1_RX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_RX_CONFIG */
+#endif /* BSP_UART1_RX_USING_DMA */
+
+#if defined(BSP_UART1_TX_USING_DMA)
+#ifndef UART1_DMA_TX_CONFIG
+#define UART1_DMA_TX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART1_TX_DMA_INSTANCE,                          \
+        .request =  UART1_TX_DMA_REQUEST,                           \
+        .dma_rcc  = UART1_TX_DMA_RCC,                               \
+        .dma_irq  = UART1_TX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_TX_CONFIG */
+#endif /* BSP_UART1_TX_USING_DMA */
+
+#if defined(BSP_USING_UART2)
+#ifndef UART2_CONFIG
+#if defined(STM32G0B1xx) || defined(STM32G0C1xx)
+#define UART2_CONFIG                                                \
+    {                                                               \
+        .name = "uart2",                                            \
+        .Instance = USART2,                                         \
+        .irq_type = USART2_LPUART2_IRQn ,                           \
+    }
+#else
+#define UART2_CONFIG                                                \
+    {                                                               \
+        .name = "uart2",                                            \
+        .Instance = USART2,                                         \
+        .irq_type = USART2_IRQn,                                    \
+    }
+#endif /* defined(STM32G0B1xx) || defined(STM32G0C1xx) */
+#endif /* UART2_CONFIG */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_UART2_RX_USING_DMA)
+#ifndef UART2_DMA_RX_CONFIG
+#define UART2_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART2_RX_DMA_INSTANCE,                          \
+        .request =  UART2_RX_DMA_REQUEST,                           \
+        .dma_rcc  = UART2_RX_DMA_RCC,                               \
+        .dma_irq  = UART2_RX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_RX_CONFIG */
+#endif /* BSP_UART2_RX_USING_DMA */
+
+#if defined(BSP_UART2_TX_USING_DMA)
+#ifndef UART2_DMA_TX_CONFIG
+#define UART2_DMA_TX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART2_TX_DMA_INSTANCE,                          \
+        .request =  UART2_TX_DMA_REQUEST,                           \
+        .dma_rcc  = UART2_TX_DMA_RCC,                               \
+        .dma_irq  = UART2_TX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_TX_CONFIG */
+#endif /* BSP_UART2_TX_USING_DMA */
+
+#if defined(BSP_USING_UART3)
+#ifndef UART3_CONFIG
+#if defined(STM32G0B1xx) || defined(STM32G0C1xx)
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_4_5_6_LPUART1_IRQn,                      \
+    }
+#elif defined(STM32G070xx)
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_4_IRQn,                                  \
+    }
+#elif defined(STM32G071xx) || defined(STM32G081xx)
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_4_LPUART1_IRQn,                          \
+    }
+#elif defined(STM32G0B0xx)
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_4_5_6_IRQn,                              \
+    }
+#else
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_IRQn,                                    \
+    }
+#endif /* defined(STM32G0B1xx) || defined(STM32G0C1xx) */
+#endif /* UART3_CONFIG */
+#endif /* BSP_USING_UART3 */
+
+#if defined(BSP_UART3_RX_USING_DMA)
+#ifndef UART3_DMA_RX_CONFIG
+#define UART3_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART3_RX_DMA_INSTANCE,                          \
+        .request =  UART3_RX_DMA_REQUEST,                           \
+        .dma_rcc  = UART3_RX_DMA_RCC,                               \
+        .dma_irq  = UART3_RX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_RX_CONFIG */
+#endif /* BSP_UART3_RX_USING_DMA */
+
+#if defined(BSP_USING_UART4)
+#ifndef UART4_CONFIG
+#if defined(STM32G0B1xx) || defined(STM32G0C1xx)
+#define UART4_CONFIG                                                \
+    {                                                               \
+        .name = "uart4",                                            \
+        .Instance = USART4,                                         \
+        .irq_type = USART3_4_5_6_LPUART1_IRQn,                      \
+    }
+#elif defined(STM32G070xx)
+#define UART4_CONFIG                                                \
+    {                                                               \
+        .name = "uart4",                                            \
+        .Instance = USART4,                                         \
+        .irq_type = USART3_4_IRQn,                                  \
+    }
+#elif defined(STM32G071xx) || defined(STM32G081xx)
+#define UART4_CONFIG                                                \
+    {                                                               \
+        .name = "uart4",                                            \
+        .Instance = USART4,                                         \
+        .irq_type = USART3_4_LPUART1_IRQn,                          \
+    }
+#elif defined(STM32G0B0xx)
+#define UART4_CONFIG                                                \
+    {                                                               \
+        .name = "uart4",                                            \
+        .Instance = USART4,                                         \
+        .irq_type = USART3_4_5_6_IRQn,                              \
+    }
+#else
+#define UART4_CONFIG                                                \
+    {                                                               \
+        .name = "uart4",                                            \
+        .Instance = USART4,                                         \
+        .irq_type = USART4_IRQn,                                    \
+    }
+#endif /* defined(STM32G0B1xx) || defined(STM32G0C1xx) */
+#endif /* UART4_CONFIG */
+#endif /* BSP_USING_UART4 */
+
+#if defined(BSP_UART4_RX_USING_DMA)
+#ifndef UART4_DMA_RX_CONFIG
+#define UART4_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART4_RX_DMA_INSTANCE,                          \
+        .request =  UART4_RX_DMA_REQUEST,                           \
+        .dma_rcc  = UART4_RX_DMA_RCC,                               \
+        .dma_irq  = UART4_RX_DMA_IRQ,                               \
+    }
+#endif /* UART4_DMA_RX_CONFIG */
+#endif /* BSP_UART4_RX_USING_DMA */
+
+#if defined(BSP_USING_UART5)
+#ifndef UART5_CONFIG
+#if defined(STM32G0B1xx) || defined(STM32G0C1xx)
+#define UART5_CONFIG                                                \
+    {                                                               \
+        .name = "uart5",                                            \
+        .Instance = UART5,                                          \
+        .irq_type = USART3_4_5_6_LPUART1_IRQn,                      \
+    }
+#elif defined(STM32G0B0xx)
+#define UART5_CONFIG                                                \
+    {                                                               \
+        .name = "uart5",                                            \
+        .Instance = UART5,                                          \
+        .irq_type = USART3_4_5_6_IRQn,                              \
+    }
+#else
+#define UART5_CONFIG                                                \
+    {                                                               \
+        .name = "uart5",                                            \
+        .Instance = UART5,                                          \
+        .irq_type = UART5_IRQn,                                     \
+    }
+#endif /* defined(STM32G0B1xx) || defined(STM32G0C1xx) */
+#endif /* UART5_CONFIG */
+#endif /* BSP_USING_UART5 */
+
+#if defined(BSP_UART5_RX_USING_DMA)
+#ifndef UART5_DMA_RX_CONFIG
+#define UART5_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = DMA_NOT_AVAILABLE,                              \
+    }
+#endif /* UART5_DMA_RX_CONFIG */
+#endif /* BSP_UART5_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __UART_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/g4/adc_config.h

@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-06     zylx         first version
+ */
+
+#ifndef __ADC_CONFIG_H__
+#define __ADC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_ADC1
+#ifndef ADC1_CONFIG
+#define ADC1_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC1,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = DISABLE,                       \
+       .Init.EOCSelection          = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 0,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+    }
+#endif /* ADC1_CONFIG */
+#endif /* BSP_USING_ADC1 */
+
+#ifdef BSP_USING_ADC2
+#ifndef ADC2_CONFIG
+#define ADC2_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC2,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = DISABLE,                       \
+       .Init.EOCSelection          = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 0,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+    }
+#endif /* ADC2_CONFIG */
+#endif /* BSP_USING_ADC2 */
+
+#ifdef BSP_USING_ADC3
+#ifndef ADC3_CONFIG
+#define ADC3_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC3,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = DISABLE,                       \
+       .Init.EOCSelection          = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 0,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+    }
+#endif /* ADC3_CONFIG */
+#endif /* BSP_USING_ADC3 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ADC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/g4/dma_config.h

@@ -0,0 +1,284 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-01-02     zylx         first version
+ * 2019-01-08     SummerGift   clean up the code
+ */
+
+#ifndef __DMA_CONFIG_H__
+#define __DMA_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* DMA1 stream0 */
+#if defined(BSP_SPI3_RX_USING_DMA) && !defined(SPI3_RX_DMA_INSTANCE)
+#define SPI3_DMA_RX_IRQHandler           DMA1_Stream0_IRQHandler
+#define SPI3_RX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_RX_DMA_INSTANCE             DMA1_Stream0
+#define SPI3_RX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_RX_DMA_IRQ                  DMA1_Stream0_IRQn
+#elif defined(BSP_UART5_RX_USING_DMA) && !defined(UART5_RX_DMA_INSTANCE)
+#define UART5_DMA_RX_IRQHandler          DMA1_Stream0_IRQHandler
+#define UART5_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART5_RX_DMA_INSTANCE            DMA1_Stream0
+#define UART5_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART5_RX_DMA_IRQ                 DMA1_Stream0_IRQn
+#elif defined(BSP_UART8_TX_USING_DMA) && !defined(UART8_TX_DMA_INSTANCE)
+#define UART8_DMA_TX_IRQHandler          DMA1_Stream0_IRQHandler
+#define UART8_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART8_TX_DMA_INSTANCE            DMA1_Stream0
+#define UART8_TX_DMA_CHANNEL             DMA_CHANNEL_5
+#define UART8_TX_DMA_IRQ                 DMA1_Stream0_IRQn
+#endif
+
+/* DMA1 stream1 */
+#if defined(BSP_UART3_RX_USING_DMA) && !defined(UART3_RX_DMA_INSTANCE)
+#define UART3_DMA_RX_IRQHandler          DMA1_Stream1_IRQHandler
+#define UART3_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART3_RX_DMA_INSTANCE            DMA1_Stream1
+#define UART3_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART3_RX_DMA_IRQ                 DMA1_Stream1_IRQn
+#elif defined(BSP_UART7_RX_USING_DMA) && !defined(UART7_RX_DMA_INSTANCE)
+#define UART7_DMA_RX_IRQHandler          DMA1_Stream1_IRQHandler
+#define UART7_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART7_RX_DMA_INSTANCE            DMA1_Stream1
+#define UART7_RX_DMA_CHANNEL             DMA_CHANNEL_5
+#define UART7_RX_DMA_IRQ                 DMA1_Stream1_IRQn
+#endif
+
+/* DMA1 stream2 */
+#if defined(BSP_SPI3_RX_USING_DMA) && !defined(SPI3_RX_DMA_INSTANCE)
+#define SPI3_DMA_RX_IRQHandler           DMA1_Stream2_IRQHandler
+#define SPI3_RX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_RX_DMA_INSTANCE             DMA1_Stream2
+#define SPI3_RX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_RX_DMA_IRQ                  DMA1_Stream2_IRQn
+#elif defined(BSP_UART4_RX_USING_DMA) && !defined(UART4_RX_DMA_INSTANCE)
+#define UART4_DMA_RX_IRQHandler          DMA1_Stream2_IRQHandler
+#define UART4_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART4_RX_DMA_INSTANCE            DMA1_Stream2
+#define UART4_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART4_RX_DMA_IRQ                 DMA1_Stream2_IRQn
+#endif
+
+/* DMA1 stream3 */
+#if defined(BSP_SPI2_RX_USING_DMA) && !defined(SPI2_RX_DMA_INSTANCE)
+#define SPI2_DMA_RX_IRQHandler           DMA1_Stream3_IRQHandler
+#define SPI2_RX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI2_RX_DMA_INSTANCE             DMA1_Stream3
+#define SPI2_RX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI2_RX_DMA_IRQ                  DMA1_Stream3_IRQn
+#elif defined(BSP_UART3_TX_USING_DMA) && !defined(UART3_TX_DMA_INSTANCE)
+#define UART3_DMA_TX_IRQHandler          DMA1_Stream3_IRQHandler
+#define UART3_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART3_TX_DMA_INSTANCE            DMA1_Stream3
+#define UART3_TX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART3_TX_DMA_IRQ                 DMA1_Stream3_IRQn
+#elif defined(BSP_UART7_TX_USING_DMA) && !defined(UART7_TX_DMA_INSTANCE)
+#define UART7_DMA_RX_IRQHandler          DMA1_Stream3_IRQHandler
+#define UART7_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART7_RX_DMA_INSTANCE            DMA1_Stream3
+#define UART7_RX_DMA_CHANNEL             DMA_CHANNEL_5
+#define UART7_RX_DMA_IRQ                 DMA1_Stream3_IRQn
+#endif
+
+/* DMA1 stream4 */
+#if defined(BSP_SPI2_TX_USING_DMA) && !defined(SPI2_TX_DMA_INSTANCE)
+#define SPI2_DMA_TX_IRQHandler           DMA1_Stream4_IRQHandler
+#define SPI2_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI2_TX_DMA_INSTANCE             DMA1_Stream4
+#define SPI2_TX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI2_TX_DMA_IRQ                  DMA1_Stream4_IRQn
+#elif defined(BSP_UART4_TX_USING_DMA) && !defined(UART4_TX_DMA_INSTANCE)
+#define UART4_DMA_TX_IRQHandler          DMA1_Stream4_IRQHandler
+#define UART4_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART4_TX_DMA_INSTANCE            DMA1_Stream4
+#define UART4_TX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART4_TX_DMA_IRQ                 DMA1_Stream4_IRQn
+#endif
+
+/* DMA1 stream5 */
+#if defined(BSP_SPI3_TX_USING_DMA) && !defined(SPI3_TX_DMA_INSTANCE)
+#define SPI3_DMA_TX_IRQHandler           DMA1_Stream5_IRQHandler
+#define SPI3_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_TX_DMA_INSTANCE             DMA1_Stream5
+#define SPI3_TX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_TX_DMA_IRQ                  DMA1_Stream5_IRQn
+#elif defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
+#define UART2_DMA_RX_IRQHandler          DMA1_Stream5_IRQHandler
+#define UART2_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART2_RX_DMA_INSTANCE            DMA1_Stream5
+#define UART2_RX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART2_RX_DMA_IRQ                 DMA1_Stream5_IRQn
+#endif
+
+/* DMA1 stream6 */
+#if defined(BSP_UART2_TX_USING_DMA) && !defined(UART2_TX_DMA_INSTANCE)
+#define UART2_DMA_TX_IRQHandler          DMA1_Stream6_IRQHandler
+#define UART2_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART2_TX_DMA_INSTANCE            DMA1_Stream6
+#define UART2_TX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART2_TX_DMA_IRQ                 DMA1_Stream6_IRQn
+#elif defined(BSP_UART8_RX_USING_DMA) && !defined(UART8_RX_DMA_INSTANCE)
+#define UART8_DMA_RX_IRQHandler          DMA1_Stream6_IRQHandler
+#define UART8_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART8_RX_DMA_INSTANCE            DMA1_Stream6
+#define UART8_RX_DMA_CHANNEL             DMA_CHANNEL_5
+#define UART8_RX_DMA_IRQ                 DMA1_Stream6_IRQn
+#endif
+
+/* DMA1 stream7 */
+#if defined(BSP_SPI3_TX_USING_DMA) && !defined(SPI3_TX_DMA_INSTANCE)
+#define SPI3_DMA_TX_IRQHandler           DMA1_Stream7_IRQHandler
+#define SPI3_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_TX_DMA_INSTANCE             DMA1_Stream7
+#define SPI3_TX_DMA_CHANNEL              DMA_CHANNEL_0
+#define SPI3_TX_DMA_IRQ                  DMA1_Stream7_IRQn
+#elif defined(BSP_UART5_TX_USING_DMA) && !defined(UART5_TX_DMA_INSTANCE)
+#define UART5_DMA_TX_IRQHandler          DMA1_Stream7_IRQHandler
+#define UART5_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART5_TX_DMA_INSTANCE            DMA1_Stream7
+#define UART5_TX_DMA_CHANNEL             DMA_CHANNEL_4
+#define UART5_TX_DMA_IRQ                 DMA1_Stream7_IRQn
+#endif
+
+/* DMA2 stream0 */
+#if defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_IRQHandler           DMA2_Stream0_IRQHandler
+#define SPI1_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_RX_DMA_INSTANCE             DMA2_Stream0
+#define SPI1_RX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_RX_DMA_IRQ                  DMA2_Stream0_IRQn
+#elif defined(BSP_SPI4_TX_USING_DMA) && !defined(SPI4_TX_DMA_INSTANCE)
+#define SPI4_DMA_TX_IRQHandler           DMA2_Stream0_IRQHandler
+#define SPI4_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI4_TX_DMA_INSTANCE             DMA2_Stream0
+#define SPI4_TX_DMA_CHANNEL              DMA_CHANNEL_4
+#define SPI4_TX_DMA_IRQ                  DMA2_Stream0_IRQn
+#endif
+
+/* DMA2 stream1 */
+#if defined(BSP_SPI4_TX_USING_DMA) && !defined(SPI4_TX_DMA_INSTANCE)
+#define SPI4_DMA_TX_IRQHandler           DMA2_Stream1_IRQHandler
+#define SPI4_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI4_TX_DMA_INSTANCE             DMA2_Stream1
+#define SPI4_TX_DMA_CHANNEL              DMA_CHANNEL_4
+#define SPI4_TX_DMA_IRQ                  DMA2_Stream1_IRQn
+#elif defined(BSP_UART6_RX_USING_DMA) && !defined(UART6_RX_DMA_INSTANCE)
+#define UART6_DMA_RX_IRQHandler          DMA2_Stream1_IRQHandler
+#define UART6_RX_DMA_RCC                 RCC_AHB1ENR_DMA2EN
+#define UART6_RX_DMA_INSTANCE            DMA2_Stream1
+#define UART6_RX_DMA_CHANNEL             DMA_CHANNEL_5
+#define UART6_RX_DMA_IRQ                 DMA2_Stream1_IRQn
+#endif
+
+/* DMA2 stream2 */
+#if defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_IRQHandler           DMA2_Stream2_IRQHandler
+#define SPI1_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_RX_DMA_INSTANCE             DMA2_Stream2
+#define SPI1_RX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_RX_DMA_IRQ                  DMA2_Stream2_IRQn
+#elif defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_DMA_RX_IRQHandler         DMA2_Stream2_IRQHandler
+#define UART1_RX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART1_RX_DMA_INSTANCE           DMA2_Stream2
+#define UART1_RX_DMA_CHANNEL            DMA_CHANNEL_4
+#define UART1_RX_DMA_IRQ                DMA2_Stream2_IRQn
+#endif
+
+/* DMA2 stream3 */
+#if defined(BSP_SPI5_RX_USING_DMA) && !defined(SPI5_RX_DMA_INSTANCE)
+#define SPI5_DMA_RX_IRQHandler           DMA2_Stream3_IRQHandler
+#define SPI5_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_RX_DMA_INSTANCE             DMA2_Stream3
+#define SPI5_RX_DMA_CHANNEL              DMA_CHANNEL_2
+#define SPI5_RX_DMA_IRQ                  DMA2_Stream3_IRQn
+#elif defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_TX_IRQHandler           DMA2_Stream3_IRQHandler
+#define SPI1_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_TX_DMA_INSTANCE             DMA2_Stream3
+#define SPI1_TX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_TX_DMA_IRQ                  DMA2_Stream3_IRQn
+#elif defined(BSP_SPI4_TX_USING_DMA) && !defined(SPI4_TX_DMA_INSTANCE)
+#define SPI4_DMA_TX_IRQHandler           DMA2_Stream3_IRQHandler
+#define SPI4_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI4_TX_DMA_INSTANCE             DMA2_Stream3
+#define SPI4_TX_DMA_CHANNEL              DMA_CHANNEL_5
+#define SPI4_TX_DMA_IRQ                  DMA2_Stream3_IRQn
+#endif
+
+/* DMA2 stream4 */
+#if defined(BSP_SPI5_TX_USING_DMA) && !defined(SPI5_TX_DMA_INSTANCE)
+#define SPI5_DMA_TX_IRQHandler           DMA2_Stream4_IRQHandler
+#define SPI5_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_TX_DMA_INSTANCE             DMA2_Stream4
+#define SPI5_TX_DMA_CHANNEL              DMA_CHANNEL_2
+#define SPI5_TX_DMA_IRQ                  DMA2_Stream4_IRQn
+#elif defined(BSP_SPI4_TX_USING_DMA) && !defined(SPI4_TX_DMA_INSTANCE)
+#define SPI4_DMA_TX_IRQHandler           DMA2_Stream4_IRQHandler
+#define SPI4_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI4_TX_DMA_INSTANCE             DMA2_Stream4
+#define SPI4_TX_DMA_CHANNEL              DMA_CHANNEL_5
+#define SPI4_TX_DMA_IRQ                  DMA2_Stream4_IRQn
+#endif
+
+/* DMA2 stream5 */
+#if defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_TX_IRQHandler           DMA2_Stream5_IRQHandler
+#define SPI1_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_TX_DMA_INSTANCE             DMA2_Stream5
+#define SPI1_TX_DMA_CHANNEL              DMA_CHANNEL_3
+#define SPI1_TX_DMA_IRQ                  DMA2_Stream5_IRQn
+#elif defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_DMA_RX_IRQHandler         DMA2_Stream5_IRQHandler
+#define UART1_RX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART1_RX_DMA_INSTANCE           DMA2_Stream5
+#define UART1_RX_DMA_CHANNEL            DMA_CHANNEL_4
+#define UART1_RX_DMA_IRQ                DMA2_Stream5_IRQn
+#elif defined(BSP_SPI5_RX_USING_DMA) && !defined(SPI5_RX_DMA_INSTANCE)
+#define SPI5_DMA_RX_IRQHandler           DMA2_Stream5_IRQHandler
+#define SPI5_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_RX_DMA_INSTANCE             DMA2_Stream5
+#define SPI5_RX_DMA_CHANNEL              DMA_CHANNEL_7
+#define SPI5_RX_DMA_IRQ                  DMA2_Stream5_IRQn
+#endif
+
+/* DMA2 stream6 */
+#if defined(BSP_SPI5_TX_USING_DMA) && !defined(SPI5_TX_DMA_INSTANCE)
+#define SPI5_DMA_TX_IRQHandler           DMA2_Stream6_IRQHandler
+#define SPI5_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_TX_DMA_INSTANCE             DMA2_Stream6
+#define SPI5_TX_DMA_CHANNEL              DMA_CHANNEL_7
+#define SPI5_TX_DMA_IRQ                  DMA2_Stream6_IRQn
+#elif defined(BSP_UART6_TX_USING_DMA) && !defined(UART6_TX_DMA_INSTANCE)
+#define UART6_DMA_TX_IRQHandler         DMA2_Stream6_IRQHandler
+#define UART6_TX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART6_TX_DMA_INSTANCE           DMA2_Stream6
+#define UART6_TX_DMA_CHANNEL            DMA_CHANNEL_5
+#define UART6_TX_DMA_IRQ                DMA2_Stream6_IRQn
+#endif
+
+/* DMA2 stream7 */
+#if defined(BSP_UART1_TX_USING_DMA) && !defined(UART1_TX_DMA_INSTANCE)
+#define UART1_DMA_TX_IRQHandler         DMA2_Stream7_IRQHandler
+#define UART1_TX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART1_TX_DMA_INSTANCE           DMA2_Stream7
+#define UART1_TX_DMA_CHANNEL            DMA_CHANNEL_4
+#define UART1_TX_DMA_IRQ                DMA2_Stream7_IRQn
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __DMA_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/g4/pulse_encoder_config.h

@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-08-23     balanceTWK   first version
+ */
+
+#ifndef __PULSE_ENCODER_CONFIG_H__
+#define __PULSE_ENCODER_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PULSE_ENCODER1
+#ifndef PULSE_ENCODER1_CONFIG
+#define PULSE_ENCODER1_CONFIG                          \
+    {                                                  \
+       .tim_handler.Instance    = TIM1,                \
+       .encoder_irqn            = TIM1_UP_TIM10_IRQn,  \
+       .name                    = "pulse1"             \
+    }
+#endif /* PULSE_ENCODER1_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER1 */
+
+#ifdef BSP_USING_PULSE_ENCODER2
+#ifndef PULSE_ENCODER2_CONFIG
+#define PULSE_ENCODER2_CONFIG                          \
+    {                                                  \
+       .tim_handler.Instance    = TIM2,                \
+       .encoder_irqn            = TIM2_IRQn,           \
+       .name                    = "pulse2"             \
+    }
+#endif /* PULSE_ENCODER2_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER2 */
+
+#ifdef BSP_USING_PULSE_ENCODER3
+#ifndef PULSE_ENCODER3_CONFIG
+#define PULSE_ENCODER3_CONFIG                          \
+    {                                                  \
+       .tim_handler.Instance    = TIM3,                \
+       .encoder_irqn            = TIM3_IRQn,           \
+       .name                    = "pulse3"             \
+    }
+#endif /* PULSE_ENCODER3_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER3 */
+
+#ifdef BSP_USING_PULSE_ENCODER4
+#ifndef PULSE_ENCODER4_CONFIG
+#define PULSE_ENCODER4_CONFIG                          \
+    {                                                  \
+       .tim_handler.Instance    = TIM4,                \
+       .encoder_irqn            = TIM4_IRQn,           \
+       .name                    = "pulse4"             \
+    }
+#endif /* PULSE_ENCODER4_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER4 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PULSE_ENCODER_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/g4/pwm_config.h

@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     zylx         first version
+ * 2023-04-08     Wangyuqiang  complete PWM defination
+ */
+
+#ifndef __PWM_CONFIG_H__
+#define __PWM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PWM1
+#define PWM1_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM1,         \
+       .name                    = "pwm1",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM1 */
+
+#ifdef BSP_USING_PWM2
+#define PWM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .name                    = "pwm2",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM2 */
+
+#ifdef BSP_USING_PWM3
+#define PWM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .name                    = "pwm3",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM3 */
+
+#ifdef BSP_USING_PWM4
+#define PWM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .name                    = "pwm4",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM4 */
+
+#ifdef BSP_USING_PWM5
+#define PWM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .name                    = "pwm5",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM5 */
+
+#ifdef BSP_USING_PWM6
+#define PWM6_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM6,         \
+       .name                    = "pwm6",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM6 */
+
+#ifdef BSP_USING_PWM7
+#define PWM7_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM7,         \
+       .name                    = "pwm7",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM7 */
+
+#ifdef BSP_USING_PWM8
+#define PWM8_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM8,         \
+       .name                    = "pwm8",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM8 */
+
+#ifdef BSP_USING_PWM9
+#define PWM9_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM9,         \
+       .name                    = "pwm9",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM9 */
+
+#ifdef BSP_USING_PWM10
+#define PWM10_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM10,        \
+       .name                    = "pwm10",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM10 */
+
+#ifdef BSP_USING_PWM11
+#define PWM11_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM11,        \
+       .name                    = "pwm11",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM11 */
+
+#ifdef BSP_USING_PWM12
+#define PWM12_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM12,        \
+       .name                    = "pwm12",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM12 */
+
+#ifdef BSP_USING_PWM13
+#define PWM13_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM13,        \
+       .name                    = "pwm13",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM13 */
+
+#ifdef BSP_USING_PWM14
+#define PWM14_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM14,        \
+       .name                    = "pwm14",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM14 */
+
+#ifdef BSP_USING_PWM15
+#define PWM15_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM15,        \
+       .name                    = "pwm15",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM15 */
+
+#ifdef BSP_USING_PWM16
+#define PWM16_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM16,        \
+       .name                    = "pwm16",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM16 */
+
+#ifdef BSP_USING_PWM17
+#define PWM17_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM17,        \
+       .name                    = "pwm17",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM17 */
+
+#ifdef BSP_USING_PWM18
+#define PWM18_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM18,        \
+       .name                    = "pwm18",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM18 */
+
+#ifdef BSP_USING_PWM19
+#define PWM19_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM19,        \
+       .name                    = "pwm19",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM19 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PWM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/g4/qspi_config.h

@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-22     zylx         first version
+ */
+
+#ifndef __QSPI_CONFIG_H__
+#define __QSPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_QSPI
+#ifndef QSPI_BUS_CONFIG
+#define QSPI_BUS_CONFIG                                        \
+    {                                                          \
+        .Instance = QUADSPI,                                   \
+        .Init.FifoThreshold = 4,                               \
+        .Init.SampleShifting = QSPI_SAMPLE_SHIFTING_HALFCYCLE, \
+        .Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_5_CYCLE,  \
+    }
+#endif /* QSPI_BUS_CONFIG */
+#endif /* BSP_USING_QSPI */
+
+#ifdef BSP_QSPI_USING_DMA
+#ifndef QSPI_DMA_CONFIG
+#define QSPI_DMA_CONFIG                                        \
+    {                                                          \
+        .Instance = QSPI_DMA_INSTANCE,                         \
+        .Init.Channel  = QSPI_DMA_CHANNEL,                     \
+        .Init.Direction = DMA_PERIPH_TO_MEMORY,                \
+        .Init.PeriphInc = DMA_PINC_DISABLE,                    \
+        .Init.MemInc = DMA_MINC_ENABLE,                        \
+        .Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE,       \
+        .Init.MemDataAlignment = DMA_MDATAALIGN_BYTE,          \
+        .Init.Mode = DMA_NORMAL,                               \
+        .Init.Priority = DMA_PRIORITY_LOW                      \
+    }
+#endif /* QSPI_DMA_CONFIG */
+#endif /* BSP_QSPI_USING_DMA */
+
+#define QSPI_IRQn                   QUADSPI_IRQn
+#define QSPI_IRQHandler             QUADSPI_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __QSPI_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/g4/sdio_config.h

@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     BalanceTWK   first version
+ */
+
+#ifndef __SDIO_CONFIG_H__
+#define __SDIO_CONFIG_H__
+
+#include <rtthread.h>
+#include "stm32g4xx_hal.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SDIO
+#define SDIO_BUS_CONFIG                                  \
+    {                                                    \
+        .Instance = SDIO,                                \
+        .dma_rx.dma_rcc = RCC_AHB1ENR_DMA2EN,            \
+        .dma_tx.dma_rcc = RCC_AHB1ENR_DMA2EN,            \
+        .dma_rx.Instance = DMA2_Stream3,                 \
+        .dma_rx.channel = DMA_CHANNEL_4,                 \
+        .dma_rx.dma_irq = DMA2_Stream3_IRQn,             \
+        .dma_tx.Instance = DMA2_Stream6,                 \
+        .dma_tx.channel = DMA_CHANNEL_4,                 \
+        .dma_tx.dma_irq = DMA2_Stream6_IRQn,             \
+    }
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SDIO_CONFIG_H__ */
+
+
+

libraries/HAL_Drivers/drivers/config/g4/spi_config.h

@@ -0,0 +1,200 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ * 2019-01-03     zylx         modify DMA support
+ */
+
+#ifndef __SPI_CONFIG_H__
+#define __SPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SPI1
+#ifndef SPI1_BUS_CONFIG
+#define SPI1_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI1,                           \
+        .bus_name = "spi1",                         \
+        .irq_type = SPI1_IRQn,                      \
+    }
+#endif /* SPI1_BUS_CONFIG */
+#endif /* BSP_USING_SPI1 */
+
+#ifdef BSP_SPI1_TX_USING_DMA
+#ifndef SPI1_TX_DMA_CONFIG
+#define SPI1_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_TX_DMA_RCC,                 \
+        .Instance = SPI1_TX_DMA_INSTANCE,           \
+        .channel = SPI1_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI1_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_TX_DMA_CONFIG */
+#endif /* BSP_SPI1_TX_USING_DMA */
+
+#ifdef BSP_SPI1_RX_USING_DMA
+#ifndef SPI1_RX_DMA_CONFIG
+#define SPI1_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_RX_DMA_RCC,                 \
+        .Instance = SPI1_RX_DMA_INSTANCE,           \
+        .channel = SPI1_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI1_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_RX_DMA_CONFIG */
+#endif /* BSP_SPI1_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI2
+#ifndef SPI2_BUS_CONFIG
+#define SPI2_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI2,                           \
+        .bus_name = "spi2",                         \
+        .irq_type = SPI2_IRQn,                      \
+    }
+#endif /* SPI2_BUS_CONFIG */
+#endif /* BSP_USING_SPI2 */
+
+#ifdef BSP_SPI2_TX_USING_DMA
+#ifndef SPI2_TX_DMA_CONFIG
+#define SPI2_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI2_TX_DMA_RCC,                 \
+        .Instance = SPI2_TX_DMA_INSTANCE,           \
+        .channel = SPI2_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI2_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI2_TX_DMA_CONFIG */
+#endif /* BSP_SPI2_TX_USING_DMA */
+
+#ifdef BSP_SPI2_RX_USING_DMA
+#ifndef SPI2_RX_DMA_CONFIG
+#define SPI2_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI2_RX_DMA_RCC,                 \
+        .Instance = SPI2_RX_DMA_INSTANCE,           \
+        .channel = SPI2_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI2_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI2_RX_DMA_CONFIG */
+#endif /* BSP_SPI2_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI3
+#ifndef SPI3_BUS_CONFIG
+#define SPI3_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI3,                           \
+        .bus_name = "spi3",                         \
+        .irq_type = SPI3_IRQn,                      \
+    }
+#endif /* SPI3_BUS_CONFIG */
+#endif /* BSP_USING_SPI3 */
+
+#ifdef BSP_SPI3_TX_USING_DMA
+#ifndef SPI3_TX_DMA_CONFIG
+#define SPI3_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI3_TX_DMA_RCC,                 \
+        .Instance = SPI3_TX_DMA_INSTANCE,           \
+        .channel = SPI3_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI3_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI3_TX_DMA_CONFIG */
+#endif /* BSP_SPI3_TX_USING_DMA */
+
+#ifdef BSP_SPI3_RX_USING_DMA
+#ifndef SPI3_RX_DMA_CONFIG
+#define SPI3_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI3_RX_DMA_RCC,                 \
+        .Instance = SPI3_RX_DMA_INSTANCE,           \
+        .channel = SPI3_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI3_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI3_RX_DMA_CONFIG */
+#endif /* BSP_SPI3_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI4
+#ifndef SPI4_BUS_CONFIG
+#define SPI4_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI4,                           \
+        .bus_name = "spi4",                         \
+        .irq_type = SPI4_IRQn,                      \
+    }
+#endif /* SPI4_BUS_CONFIG */
+#endif /* BSP_USING_SPI4 */
+
+#ifdef BSP_SPI4_TX_USING_DMA
+#ifndef SPI4_TX_DMA_CONFIG
+#define SPI4_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI4_TX_DMA_RCC,                 \
+        .Instance = SPI4_TX_DMA_INSTANCE,           \
+        .channel = SPI4_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI4_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI4_TX_DMA_CONFIG */
+#endif /* BSP_SPI4_TX_USING_DMA */
+
+#ifdef BSP_SPI4_RX_USING_DMA
+#ifndef SPI4_RX_DMA_CONFIG
+#define SPI4_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI4_RX_DMA_RCC,                 \
+        .Instance = SPI4_RX_DMA_INSTANCE,           \
+        .channel = SPI4_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI4_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI4_RX_DMA_CONFIG */
+#endif /* BSP_SPI4_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI5
+#ifndef SPI5_BUS_CONFIG
+#define SPI5_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI5,                           \
+        .bus_name = "spi5",                         \
+        .irq_type = SPI5_IRQn,                      \
+    }
+#endif /* SPI5_BUS_CONFIG */
+#endif /* BSP_USING_SPI5 */
+
+#ifdef BSP_SPI5_TX_USING_DMA
+#ifndef SPI5_TX_DMA_CONFIG
+#define SPI5_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI5_TX_DMA_RCC,                 \
+        .Instance = SPI5_TX_DMA_INSTANCE,           \
+        .channel = SPI5_TX_DMA_CHANNEL,             \
+        .dma_irq = SPI5_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI5_TX_DMA_CONFIG */
+#endif /* BSP_SPI5_TX_USING_DMA */
+
+#ifdef BSP_SPI5_RX_USING_DMA
+#ifndef SPI5_RX_DMA_CONFIG
+#define SPI5_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI5_RX_DMA_RCC,                 \
+        .Instance = SPI5_RX_DMA_INSTANCE,           \
+        .channel = SPI5_RX_DMA_CHANNEL,             \
+        .dma_irq = SPI5_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI5_RX_DMA_CONFIG */
+#endif /* BSP_SPI5_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SPI_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/g4/tim_config.h

@@ -0,0 +1,178 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-11     zylx         first version
+ * 2023-12-7      supperthomas  add timer
+ */
+
+#ifndef __TIM_CONFIG_H__
+#define __TIM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef TIM_DEV_INFO_CONFIG
+#define TIM_DEV_INFO_CONFIG                     \
+    {                                           \
+        .maxfreq = 1000000,                     \
+        .minfreq = 3000,                        \
+        .maxcnt  = 0xFFFF,                      \
+        .cntmode = HWTIMER_CNTMODE_UP,          \
+    }
+#endif /* TIM_DEV_INFO_CONFIG */
+
+#ifdef BSP_USING_TIM1
+#ifndef TIM1_CONFIG
+#define TIM1_CONFIG                                        \
+    {                                                      \
+       .tim_handle.Instance     = TIM1,                    \
+       .tim_irqn                = TIM1_UP_TIM16_IRQn,                    \
+       .name                    = "timer1",                \
+    }
+#endif /* TIM1_CONFIG */
+#endif /* BSP_USING_TIM1 */
+
+#ifdef BSP_USING_TIM2
+#ifndef TIM2_CONFIG
+#define TIM2_CONFIG                                        \
+    {                                                      \
+       .tim_handle.Instance     = TIM2,                    \
+       .tim_irqn                = TIM2_IRQn,               \
+       .name                    = "timer2",                \
+    }
+#endif /* TIM2_CONFIG */
+#endif /* BSP_USING_TIM2 */
+
+#ifdef BSP_USING_TIM3
+#ifndef TIM3_CONFIG
+#define TIM3_CONFIG                                        \
+    {                                                      \
+       .tim_handle.Instance     = TIM3,                    \
+       .tim_irqn                = TIM3_IRQn,               \
+       .name                    = "timer3",                \
+    }
+#endif /* TIM3_CONFIG */
+#endif /* BSP_USING_TIM3 */
+
+#ifdef BSP_USING_TIM4
+#ifndef TIM4_CONFIG
+#define TIM4_CONFIG                                        \
+    {                                                      \
+       .tim_handle.Instance     = TIM4,                    \
+       .tim_irqn                = TIM4_IRQn,               \
+       .name                    = "timer4",                \
+    }
+#endif /* TIM4_CONFIG */
+#endif /* BSP_USING_TIM4 */
+
+#ifdef BSP_USING_TIM6
+#ifndef TIM6_CONFIG
+#define TIM6_CONFIG                                        \
+    {                                                      \
+       .tim_handle.Instance     = TIM6,                    \
+       .tim_irqn                = TIM6_IRQn,               \
+       .name                    = "timer6",                \
+    }
+#endif /* TIM7_CONFIG */
+#endif /* BSP_USING_TIM7 */
+
+#ifdef BSP_USING_TIM7
+#ifndef TIM7_CONFIG
+#define TIM7_CONFIG                                        \
+    {                                                      \
+       .tim_handle.Instance     = TIM7,                    \
+       .tim_irqn                = TIM7_IRQn,               \
+       .name                    = "timer7",                \
+    }
+#endif /* TIM7_CONFIG */
+#endif /* BSP_USING_TIM7 */
+
+#ifdef BSP_USING_TIM8
+#ifndef TIM8_CONFIG
+#define TIM8_CONFIG                                        \
+    {                                                      \
+       .tim_handle.Instance     = TIM8,                    \
+       .tim_irqn                = TIM8_UP_IRQn,                    \
+       .name                    = "timer8",                \
+    }
+#endif /* TIM8_CONFIG */
+#endif /* BSP_USING_TIM8 */
+
+#ifdef BSP_USING_TIM11
+#ifndef TIM11_CONFIG
+#define TIM11_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM11,                    \
+       .tim_irqn                = TIM1_TRG_COM_TIM11_IRQn,  \
+       .name                    = "timer11",                \
+    }
+#endif /* TIM11_CONFIG */
+#endif /* BSP_USING_TIM11 */
+
+#ifdef BSP_USING_TIM13
+#ifndef TIM13_CONFIG
+#define TIM13_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM13,                    \
+       .tim_irqn                = TIM8_UP_TIM13_IRQn,       \
+       .name                    = "timer13",                \
+    }
+#endif /* TIM13_CONFIG */
+#endif /* BSP_USING_TIM13 */
+
+#ifdef BSP_USING_TIM14
+#ifndef TIM14_CONFIG
+#define TIM14_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM14,                    \
+       .tim_irqn                = TIM8_TRG_COM_TIM14_IRQn,  \
+       .name                    = "timer14",                \
+    }
+#endif /* TIM14_CONFIG */
+#endif /* BSP_USING_TIM14 */
+
+#ifdef BSP_USING_TIM15
+#ifndef TIM15_CONFIG
+#define TIM15_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM15,                    \
+       .tim_irqn                = TIM1_BRK_TIM15_IRQn,                     \
+       .name                    = "timer15",                \
+    }
+#endif /* TIM16_CONFIG */
+#endif /* BSP_USING_TIM16 */
+
+#ifdef BSP_USING_TIM16
+#ifndef TIM16_CONFIG
+#define TIM16_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM16,                    \
+       .tim_irqn                = TIM1_UP_TIM16_IRQn,                     \
+       .name                    = "timer16",                \
+    }
+#endif /* TIM16_CONFIG */
+#endif /* BSP_USING_TIM16 */
+
+#ifdef BSP_USING_TIM17
+#ifndef TIM17_CONFIG
+#define TIM17_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM17,                    \
+       .tim_irqn                = TIM1_TRG_COM_TIM17_IRQn,                     \
+       .name                    = "timer17",                \
+    }
+#endif /* TIM17_CONFIG */
+#endif /* BSP_USING_TIM17 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/g4/uart_config.h

@@ -0,0 +1,223 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-10-30     SummerGift   first version
+ * 2019-01-03     zylx         modify dma support
+ * 2019-10-03     xuzhuoyi     modify for STM32G4
+ */
+
+#ifndef __UART_CONFIG_H__
+#define __UART_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_USING_LPUART1)
+#ifndef LPUART1_CONFIG
+#define LPUART1_CONFIG                                              \
+    {                                                               \
+        .name = "lpuart1",                                          \
+        .Instance = LPUART1,                                        \
+        .irq_type = LPUART1_IRQn,                                   \
+    }
+#endif /* LPUART1_CONFIG */
+#if defined(BSP_LPUART1_RX_USING_DMA)
+#ifndef LPUART1_DMA_CONFIG
+#define LPUART1_DMA_CONFIG                                          \
+    {                                                               \
+        .Instance = LPUART1_RX_DMA_INSTANCE,                        \
+        .request  = LPUART1_RX_DMA_REQUEST,                         \
+        .dma_rcc  = LPUART1_RX_DMA_RCC,                             \
+        .dma_irq  = LPUART1_RX_DMA_IRQ,                             \
+    }
+#endif /* LPUART1_DMA_CONFIG */
+#endif /* BSP_LPUART1_RX_USING_DMA */
+#endif /* BSP_USING_LPUART1 */
+
+#if defined(BSP_USING_UART1)
+#ifndef UART1_CONFIG
+#define UART1_CONFIG                                                \
+    {                                                               \
+        .name = "uart1",                                            \
+        .Instance = USART1,                                         \
+        .irq_type = USART1_IRQn,                                    \
+    }
+#endif /* UART1_CONFIG */
+
+#if defined(BSP_UART1_RX_USING_DMA)
+#ifndef UART1_DMA_RX_CONFIG
+#define UART1_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART1_RX_DMA_INSTANCE,                         \
+        .channel = UART1_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART1_RX_DMA_RCC,                               \
+        .dma_irq = UART1_RX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_RX_CONFIG */
+#endif /* BSP_UART1_RX_USING_DMA */
+
+#if defined(BSP_UART1_TX_USING_DMA)
+#ifndef UART1_DMA_TX_CONFIG
+#define UART1_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART1_TX_DMA_INSTANCE,                         \
+        .channel = UART1_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART1_TX_DMA_RCC,                               \
+        .dma_irq = UART1_TX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_TX_CONFIG */
+#endif /* BSP_UART1_TX_USING_DMA */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_USING_UART2)
+#ifndef UART2_CONFIG
+#define UART2_CONFIG                                                \
+    {                                                               \
+        .name = "uart2",                                            \
+        .Instance = USART2,                                         \
+        .irq_type = USART2_IRQn,                                    \
+    }
+#endif /* UART2_CONFIG */
+
+#if defined(BSP_UART2_RX_USING_DMA)
+#ifndef UART2_DMA_RX_CONFIG
+#define UART2_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART2_RX_DMA_INSTANCE,                         \
+        .channel = UART2_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART2_RX_DMA_RCC,                               \
+        .dma_irq = UART2_RX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_RX_CONFIG */
+#endif /* BSP_UART2_RX_USING_DMA */
+
+#if defined(BSP_UART2_TX_USING_DMA)
+#ifndef UART2_DMA_TX_CONFIG
+#define UART2_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART2_TX_DMA_INSTANCE,                         \
+        .channel = UART2_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART2_TX_DMA_RCC,                               \
+        .dma_irq = UART2_TX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_TX_CONFIG */
+#endif /* BSP_UART2_TX_USING_DMA */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_USING_UART3)
+#ifndef UART3_CONFIG
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_IRQn,                                    \
+    }
+#endif /* UART3_CONFIG */
+
+#if defined(BSP_UART3_RX_USING_DMA)
+#ifndef UART3_DMA_RX_CONFIG
+#define UART3_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART3_RX_DMA_INSTANCE,                         \
+        .channel = UART3_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART3_RX_DMA_RCC,                               \
+        .dma_irq = UART3_RX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_RX_CONFIG */
+#endif /* BSP_UART3_RX_USING_DMA */
+
+#if defined(BSP_UART3_TX_USING_DMA)
+#ifndef UART3_DMA_TX_CONFIG
+#define UART3_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART3_TX_DMA_INSTANCE,                         \
+        .channel = UART3_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART3_TX_DMA_RCC,                               \
+        .dma_irq = UART3_TX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_TX_CONFIG */
+#endif /* BSP_UART3_TX_USING_DMA */
+#endif /* BSP_USING_UART3 */
+
+#if defined(BSP_USING_UART4)
+#ifndef UART4_CONFIG
+#define UART4_CONFIG                                                \
+    {                                                               \
+        .name = "uart4",                                            \
+        .Instance = UART4,                                          \
+        .irq_type = UART4_IRQn,                                     \
+    }
+#endif /* UART4_CONFIG */
+
+#if defined(BSP_UART4_RX_USING_DMA)
+#ifndef UART4_DMA_RX_CONFIG
+#define UART4_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART4_RX_DMA_INSTANCE,                         \
+        .channel = UART4_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART4_RX_DMA_RCC,                               \
+        .dma_irq = UART4_RX_DMA_IRQ,                               \
+    }
+#endif /* UART4_DMA_RX_CONFIG */
+#endif /* BSP_UART4_RX_USING_DMA */
+
+#if defined(BSP_UART4_TX_USING_DMA)
+#ifndef UART4_DMA_TX_CONFIG
+#define UART4_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART4_TX_DMA_INSTANCE,                         \
+        .channel = UART4_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART4_TX_DMA_RCC,                               \
+        .dma_irq = UART4_TX_DMA_IRQ,                               \
+    }
+#endif /* UART4_DMA_TX_CONFIG */
+#endif /* BSP_UART4_RX_USING_DMA */
+#endif /* BSP_USING_UART4 */
+
+#if defined(BSP_USING_UART5)
+#ifndef UART5_CONFIG
+#define UART5_CONFIG                                                \
+    {                                                               \
+        .name = "uart5",                                            \
+        .Instance = UART5,                                          \
+        .irq_type = UART5_IRQn,                                     \
+    }
+#endif /* UART5_CONFIG */
+
+#if defined(BSP_UART5_RX_USING_DMA)
+#ifndef UART5_DMA_RX_CONFIG
+#define UART5_DMA_RX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART5_RX_DMA_INSTANCE,                         \
+        .channel = UART5_RX_DMA_CHANNEL,                           \
+        .dma_rcc = UART5_RX_DMA_RCC,                               \
+        .dma_irq = UART5_RX_DMA_IRQ,                               \
+    }
+#endif /* UART5_DMA_RX_CONFIG */
+#endif /* BSP_UART5_RX_USING_DMA */
+
+#if defined(BSP_UART5_TX_USING_DMA)
+#ifndef UART5_DMA_TX_CONFIG
+#define UART5_DMA_TX_CONFIG                                        \
+    {                                                              \
+        .Instance = UART5_TX_DMA_INSTANCE,                         \
+        .channel = UART5_TX_DMA_CHANNEL,                           \
+        .dma_rcc = UART5_TX_DMA_RCC,                               \
+        .dma_irq = UART5_TX_DMA_IRQ,                               \
+    }
+#endif /* UART5_DMA_TX_CONFIG */
+#endif /* BSP_UART5_TX_USING_DMA */
+#endif /* BSP_USING_UART5 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

libraries/HAL_Drivers/drivers/config/g4/usbd_config.h

@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-04-10     ZYH          first version
+ * 2019-10-27     flybreak     Compatible with the HS
+ */
+#ifndef __USBD_CONFIG_H__
+#define __USBD_CONFIG_H__
+
+#include <rtconfig.h>
+
+#ifdef BSP_USBD_TYPE_HS
+#define USBD_IRQ_TYPE     OTG_HS_IRQn
+#define USBD_IRQ_HANDLER  OTG_HS_IRQHandler
+#define USBD_INSTANCE     USB_OTG_HS
+#else
+#define USBD_IRQ_TYPE     OTG_FS_IRQn
+#define USBD_IRQ_HANDLER  OTG_FS_IRQHandler
+#define USBD_INSTANCE     USB_OTG_FS
+#endif
+
+#ifdef BSP_USBD_SPEED_HS
+#define USBD_PCD_SPEED    PCD_SPEED_HIGH
+#elif  BSP_USBD_SPEED_HSINFS
+#define USBD_PCD_SPEED    PCD_SPEED_HIGH_IN_FULL
+#else
+#define USBD_PCD_SPEED    PCD_SPEED_FULL
+#endif
+
+#ifdef BSP_USBD_PHY_ULPI
+#define USBD_PCD_PHY_MODULE    PCD_PHY_ULPI
+#elif  BSP_USBD_PHY_UTMI
+#define USBD_PCD_PHY_MODULE    PCD_PHY_UTMI
+#else
+#define USBD_PCD_PHY_MODULE    PCD_PHY_EMBEDDED
+#endif
+
+#endif

libraries/HAL_Drivers/drivers/config/h5/adc_config.h

@@ -0,0 +1,72 @@
+/*
+ * Copyright (c) 2006-2024, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2024-01-19     ChuShicheng  first version
+ */
+
+#ifndef __ADC_CONFIG_H__
+#define __ADC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_ADC1
+#ifndef ADC1_CONFIG
+#define ADC1_CONFIG                                                     \
+    {                                                                   \
+        .Instance                      = ADC1,                          \
+        .Init.ClockPrescaler           = ADC_CLOCK_ASYNC_DIV2,          \
+        .Init.Resolution               = ADC_RESOLUTION_12B,            \
+        .Init.DataAlign                = ADC_DATAALIGN_RIGHT,           \
+        .Init.ScanConvMode             = ADC_SCAN_DISABLE,              \
+        .Init.EOCSelection             = ADC_EOC_SINGLE_CONV,           \
+        .Init.LowPowerAutoWait         = DISABLE,                       \
+        .Init.ContinuousConvMode       = DISABLE,                       \
+        .Init.NbrOfConversion          = 1,                             \
+        .Init.DiscontinuousConvMode    = DISABLE,                       \
+        .Init.ExternalTrigConv         = ADC_SOFTWARE_START,            \
+        .Init.ExternalTrigConvEdge     = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+        .Init.DMAContinuousRequests    = DISABLE,                       \
+        .Init.SamplingMode             = ADC_SAMPLING_MODE_NORMAL,      \
+        .Init.Overrun                  = ADC_OVR_DATA_PRESERVED,        \
+        .Init.OversamplingMode         = DISABLE,                       \
+    }
+#endif /* ADC1_CONFIG */
+#endif /* BSP_USING_ADC1 */
+
+#ifdef BSP_USING_ADC2
+#ifndef ADC2_CONFIG
+#define ADC2_CONFIG                                                     \
+    {                                                                   \
+        .Instance                      = ADC2,                          \
+        .Init.ClockPrescaler           = ADC_CLOCK_ASYNC_DIV2,          \
+        .Init.Resolution               = ADC_RESOLUTION_12B,            \
+        .Init.DataAlign                = ADC_DATAALIGN_RIGHT,           \
+        .Init.ScanConvMode             = ADC_SCAN_DISABLE,              \
+        .Init.EOCSelection             = ADC_EOC_SINGLE_CONV,           \
+        .Init.LowPowerAutoWait         = DISABLE,                       \
+        .Init.ContinuousConvMode       = DISABLE,                       \
+        .Init.NbrOfConversion          = 1,                             \
+        .Init.DiscontinuousConvMode    = DISABLE,                       \
+        .Init.ExternalTrigConv         = ADC_SOFTWARE_START,            \
+        .Init.ExternalTrigConvEdge     = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+        .Init.DMAContinuousRequests    = DISABLE,                       \
+        .Init.SamplingMode             = ADC_SAMPLING_MODE_NORMAL,      \
+        .Init.Overrun                  = ADC_OVR_DATA_PRESERVED,        \
+        .Init.OversamplingMode         = DISABLE,                       \
+    }
+#endif /* ADC2_CONFIG */
+#endif /* BSP_USING_ADC2 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ADC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/h5/pwm_config.h

@@ -0,0 +1,179 @@
+/*
+ * Copyright (c) 2006-2024, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     zylx         first version
+ * 2022-04-14     Miaowulue    add PWM1
+ * 2023-04-08     Wangyuqiang  complete PWM defination
+ */
+
+#ifndef __PWM_CONFIG_H__
+#define __PWM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PWM1
+#define PWM1_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM1,         \
+       .name                    = "pwm1",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM1 */
+
+#ifdef BSP_USING_PWM2
+#define PWM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .name                    = "pwm2",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM2 */
+
+#ifdef BSP_USING_PWM3
+#define PWM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .name                    = "pwm3",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM3 */
+
+#ifdef BSP_USING_PWM4
+#define PWM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .name                    = "pwm4",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM4 */
+
+#ifdef BSP_USING_PWM5
+#define PWM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .name                    = "pwm5",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM5 */
+
+#ifdef BSP_USING_PWM6
+#define PWM6_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM6,         \
+       .name                    = "pwm6",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM6 */
+
+#ifdef BSP_USING_PWM7
+#define PWM7_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM7,         \
+       .name                    = "pwm7",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM7 */
+
+#ifdef BSP_USING_PWM8
+#define PWM8_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM8,         \
+       .name                    = "pwm8",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM8 */
+
+#ifdef BSP_USING_PWM9
+#define PWM9_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM9,         \
+       .name                    = "pwm9",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM9 */
+
+#ifdef BSP_USING_PWM10
+#define PWM10_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM10,        \
+       .name                    = "pwm10",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM10 */
+
+#ifdef BSP_USING_PWM11
+#define PWM11_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM11,        \
+       .name                    = "pwm11",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM11 */
+
+#ifdef BSP_USING_PWM12
+#define PWM12_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM12,        \
+       .name                    = "pwm12",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM12 */
+
+#ifdef BSP_USING_PWM13
+#define PWM13_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM13,        \
+       .name                    = "pwm13",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM13 */
+
+#ifdef BSP_USING_PWM14
+#define PWM14_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM14,        \
+       .name                    = "pwm14",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM14 */
+
+#ifdef BSP_USING_PWM15
+#define PWM15_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM15,        \
+       .name                    = "pwm15",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM15 */
+
+#ifdef BSP_USING_PWM16
+#define PWM16_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM16,        \
+       .name                    = "pwm16",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM16 */
+
+#ifdef BSP_USING_PWM17
+#define PWM17_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM17,        \
+       .name                    = "pwm17",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM17 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PWM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/h5/uart_config.h

@@ -0,0 +1,151 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ */
+
+#ifndef __UART_CONFIG_H__
+#define __UART_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_USING_LPUART1)
+#ifndef LPUART1_CONFIG
+#define LPUART1_CONFIG                                              \
+    {                                                               \
+        .name = "lpuart1",                                          \
+        .Instance = LPUART1,                                        \
+        .irq_type = LPUART1_IRQn,                                   \
+    }
+#endif /* LPUART1_CONFIG */
+#if defined(BSP_LPUART1_RX_USING_DMA)
+#ifndef LPUART1_DMA_CONFIG
+#define LPUART1_DMA_CONFIG                                          \
+    {                                                               \
+        .Instance = LPUART1_RX_DMA_INSTANCE,                        \
+        .request  = LPUART1_RX_DMA_REQUEST,                         \
+        .dma_rcc  = LPUART1_RX_DMA_RCC,                             \
+        .dma_irq  = LPUART1_RX_DMA_IRQ,                             \
+    }
+#endif /* LPUART1_DMA_CONFIG */
+#endif /* BSP_LPUART1_RX_USING_DMA */
+#endif /* BSP_USING_LPUART1 */
+
+#if defined(BSP_USING_UART1)
+#ifndef UART1_CONFIG
+#define UART1_CONFIG                                                \
+    {                                                               \
+        .name = "uart1",                                            \
+        .Instance = USART1,                                         \
+        .irq_type = USART1_IRQn,                                    \
+    }
+#endif /* UART1_CONFIG */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_UART1_RX_USING_DMA)
+#ifndef UART1_DMA_RX_CONFIG
+#define UART1_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART1_RX_DMA_INSTANCE,                          \
+        .request  = UART1_RX_DMA_REQUEST,                           \
+        .dma_rcc  = UART1_RX_DMA_RCC,                               \
+        .dma_irq  = UART1_RX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_RX_CONFIG */
+#endif /* BSP_UART1_RX_USING_DMA */
+
+#if defined(BSP_UART1_TX_USING_DMA)
+#ifndef UART1_DMA_TX_CONFIG
+#define UART1_DMA_TX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART1_TX_DMA_INSTANCE,                          \
+        .request  = UART1_TX_DMA_REQUEST,                           \
+        .dma_rcc  = UART1_TX_DMA_RCC,                               \
+        .dma_irq  = UART1_TX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_TX_CONFIG */
+#endif /* BSP_UART1_TX_USING_DMA */
+
+#if defined(BSP_USING_UART2)
+#ifndef UART2_CONFIG
+#define UART2_CONFIG                                                \
+    {                                                               \
+        .name = "uart2",                                            \
+        .Instance = USART2,                                         \
+        .irq_type = USART2_IRQn,                                    \
+    }
+#endif /* UART2_CONFIG */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_UART2_RX_USING_DMA)
+#ifndef UART2_DMA_RX_CONFIG
+#define UART2_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART2_RX_DMA_INSTANCE,                          \
+        .request  = UART2_RX_DMA_REQUEST,                           \
+        .dma_rcc  = UART2_RX_DMA_RCC,                               \
+        .dma_irq  = UART2_RX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_RX_CONFIG */
+#endif /* BSP_UART2_RX_USING_DMA */
+
+#if defined(BSP_UART2_TX_USING_DMA)
+#ifndef UART2_DMA_TX_CONFIG
+#define UART2_DMA_TX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART2_TX_DMA_INSTANCE,                          \
+        .request  = UART2_TX_DMA_REQUEST,                           \
+        .dma_rcc  = UART2_TX_DMA_RCC,                               \
+        .dma_irq  = UART2_TX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_TX_CONFIG */
+#endif /* BSP_UART2_TX_USING_DMA */
+
+#if defined(BSP_USING_UART3)
+#ifndef UART3_CONFIG
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_IRQn,                                    \
+    }
+#endif /* UART3_CONFIG */
+#endif /* BSP_USING_UART3 */
+
+#if defined(BSP_UART3_RX_USING_DMA)
+#ifndef UART3_DMA_RX_CONFIG
+#define UART3_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART3_RX_DMA_INSTANCE,                          \
+        .request  = UART3_RX_DMA_REQUEST,                           \
+        .dma_rcc  = UART3_RX_DMA_RCC,                               \
+        .dma_irq  = UART3_RX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_RX_CONFIG */
+#endif /* BSP_UART3_RX_USING_DMA */
+
+#if defined(BSP_UART3_TX_USING_DMA)
+#ifndef UART3_DMA_TX_CONFIG
+#define UART3_DMA_TX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART3_TX_DMA_INSTANCE,                          \
+        .request  = UART3_TX_DMA_REQUEST,                           \
+        .dma_rcc  = UART3_TX_DMA_RCC,                               \
+        .dma_irq  = UART3_TX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_TX_CONFIG */
+#endif /* BSP_UART3_TX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

libraries/HAL_Drivers/drivers/config/h7/adc_config.h

@@ -0,0 +1,93 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-06     zylx         first version
+ */
+
+#ifndef __ADC_CONFIG_H__
+#define __ADC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_ADC1
+#ifndef ADC1_CONFIG
+#define ADC1_CONFIG                                                     \
+    {                                                                   \
+        .Instance                      = ADC1,                          \
+        .Init.ClockPrescaler           = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+        .Init.Resolution               = ADC_RESOLUTION_16B,            \
+        .Init.ScanConvMode             = ADC_SCAN_DISABLE,              \
+        .Init.EOCSelection             = ADC_EOC_SINGLE_CONV,           \
+        .Init.LowPowerAutoWait         = DISABLE,                       \
+        .Init.ContinuousConvMode       = DISABLE,                       \
+        .Init.NbrOfConversion          = 1,                             \
+        .Init.DiscontinuousConvMode    = DISABLE,                       \
+        .Init.NbrOfDiscConversion      = 1,                             \
+        .Init.ExternalTrigConv         = ADC_SOFTWARE_START,            \
+        .Init.ExternalTrigConvEdge     = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+        .Init.ConversionDataManagement = ADC_CONVERSIONDATA_DR,         \
+        .Init.Overrun                  = ADC_OVR_DATA_OVERWRITTEN,      \
+        .Init.OversamplingMode         = DISABLE,                       \
+    }
+#endif /* ADC1_CONFIG */
+#endif /* BSP_USING_ADC1 */
+
+#ifdef BSP_USING_ADC2
+#ifndef ADC2_CONFIG
+#define ADC2_CONFIG                                                     \
+    {                                                                   \
+        .Instance                      = ADC2,                          \
+        .Init.ClockPrescaler           = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+        .Init.Resolution               = ADC_RESOLUTION_16B,            \
+        .Init.ScanConvMode             = ADC_SCAN_DISABLE,              \
+        .Init.EOCSelection             = ADC_EOC_SINGLE_CONV,           \
+        .Init.LowPowerAutoWait         = DISABLE,                       \
+        .Init.ContinuousConvMode       = DISABLE,                       \
+        .Init.NbrOfConversion          = 1,                             \
+        .Init.DiscontinuousConvMode    = DISABLE,                       \
+        .Init.NbrOfDiscConversion      = 1,                             \
+        .Init.ExternalTrigConv         = ADC_SOFTWARE_START,            \
+        .Init.ExternalTrigConvEdge     = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+        .Init.ConversionDataManagement = ADC_CONVERSIONDATA_DR,         \
+        .Init.Overrun                  = ADC_OVR_DATA_OVERWRITTEN,      \
+        .Init.OversamplingMode         = DISABLE,                       \
+    }
+#endif /* ADC2_CONFIG */
+#endif /* BSP_USING_ADC2 */
+
+#ifdef BSP_USING_ADC3
+#ifndef ADC3_CONFIG
+#define ADC3_CONFIG                                                     \
+    {                                                                   \
+        .Instance                      = ADC3,                          \
+       .Init.ClockPrescaler            = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+        .Init.Resolution               = ADC_RESOLUTION_16B,            \
+        .Init.ScanConvMode             = ADC_SCAN_DISABLE,              \
+        .Init.EOCSelection             = ADC_EOC_SINGLE_CONV,           \
+        .Init.LowPowerAutoWait         = DISABLE,                       \
+        .Init.ContinuousConvMode       = DISABLE,                       \
+        .Init.NbrOfConversion          = 1,                             \
+        .Init.DiscontinuousConvMode    = DISABLE,                       \
+        .Init.NbrOfDiscConversion      = 1,                             \
+        .Init.ExternalTrigConv         = ADC_SOFTWARE_START,            \
+        .Init.ExternalTrigConvEdge     = ADC_EXTERNALTRIGCONVEDGE_NONE, \
+        .Init.ConversionDataManagement = ADC_CONVERSIONDATA_DR,         \
+        .Init.Overrun                  = ADC_OVR_DATA_OVERWRITTEN,      \
+        .Init.OversamplingMode         = DISABLE,                       \
+    }
+#endif /* ADC3_CONFIG */
+#endif /* BSP_USING_ADC3 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ADC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/h7/dac_config.h

@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-06-16     thread-liu   first version
+ */
+
+#ifndef __DAC_CONFIG_H__
+#define __DAC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_DAC1
+#ifndef DAC1_CONFIG
+#define DAC1_CONFIG                                                    \
+    {                                                                  \
+       .Instance                      = DAC1,                          \
+    }
+#endif /* DAC2_CONFIG */
+#endif /* BSP_USING_DAC2 */
+
+#ifdef BSP_USING_DAC2
+#ifndef DAC2_CONFIG
+#define DAC2_CONFIG                                                    \
+    {                                                                  \
+       .Instance                      = DAC2,                          \
+    }
+#endif /* DAC2_CONFIG */
+#endif /* BSP_USING_DAC2 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DAC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/h7/dma_config.h

@@ -0,0 +1,151 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-01-02     zylx         first version
+ * 2019-01-08     SummerGift   clean up the code
+ * 2020-05-02     whj4674672   support stm32h7 dma1 and dma2
+ */
+
+#ifndef __DMA_CONFIG_H__
+#define __DMA_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* DMA1 stream0 */
+#if defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
+#define UART2_DMA_RX_IRQHandler          DMA1_Stream0_IRQHandler
+#define UART2_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART2_RX_DMA_INSTANCE            DMA1_Stream0
+#define UART2_RX_DMA_REQUEST             DMA_REQUEST_USART2_RX
+#define UART2_RX_DMA_IRQ                 DMA1_Stream0_IRQn
+#endif
+
+/* DMA1 stream1 */
+#if defined(BSP_UART2_TX_USING_DMA) && !defined(UART2_TX_DMA_INSTANCE)
+#define UART2_DMA_TX_IRQHandler          DMA1_Stream1_IRQHandler
+#define UART2_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define UART2_TX_DMA_INSTANCE            DMA1_Stream1
+#define UART2_TX_DMA_REQUEST             DMA_REQUEST_USART2_TX
+#define UART2_TX_DMA_IRQ                 DMA1_Stream1_IRQn
+#endif
+
+/* DMA1 stream2 */
+#if defined(BSP_SPI3_RX_USING_DMA) && !defined(SPI3_RX_DMA_INSTANCE)
+#define SPI3_DMA_RX_IRQHandler           DMA1_Stream2_IRQHandler
+#define SPI3_RX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_RX_DMA_INSTANCE             DMA1_Stream2
+#define SPI3_RX_DMA_IRQ                  DMA1_Stream2_IRQn
+#endif
+
+/* DMA1 stream3 */
+#if defined(BSP_SPI2_RX_USING_DMA) && !defined(SPI2_RX_DMA_INSTANCE)
+#define SPI2_DMA_RX_IRQHandler           DMA1_Stream3_IRQHandler
+#define SPI2_RX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI2_RX_DMA_INSTANCE             DMA1_Stream3
+#define SPI2_RX_DMA_IRQ                  DMA1_Stream3_IRQn
+#endif
+
+/* DMA1 stream4 */
+#if defined(BSP_SPI2_TX_USING_DMA) && !defined(SPI2_TX_DMA_INSTANCE)
+#define SPI2_DMA_TX_IRQHandler           DMA1_Stream4_IRQHandler
+#define SPI2_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI2_TX_DMA_INSTANCE             DMA1_Stream4
+#define SPI2_TX_DMA_IRQ                  DMA1_Stream4_IRQn
+#endif
+
+
+/* DMA1 stream5 */
+#if defined(BSP_SPI3_TX_USING_DMA) && !defined(SPI3_TX_DMA_INSTANCE)
+#define SPI3_DMA_TX_IRQHandler           DMA1_Stream5_IRQHandler
+#define SPI3_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_TX_DMA_INSTANCE             DMA1_Stream5
+#define SPI3_TX_DMA_IRQ                  DMA1_Stream5_IRQn
+#endif
+
+/* DMA1 stream6 */
+
+/* DMA1 stream7 */
+#if defined(BSP_SPI3_TX_USING_DMA) && !defined(SPI3_TX_DMA_INSTANCE)
+#define SPI3_DMA_TX_IRQHandler           DMA1_Stream7_IRQHandler
+#define SPI3_TX_DMA_RCC                  RCC_AHB1ENR_DMA1EN
+#define SPI3_TX_DMA_INSTANCE             DMA1_Stream7
+#define SPI3_TX_DMA_IRQ                  DMA1_Stream7_IRQn
+#endif
+
+/* DMA2 stream0 */
+#if defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_IRQHandler           DMA2_Stream0_IRQHandler
+#define SPI1_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_RX_DMA_INSTANCE             DMA2_Stream0
+#define SPI1_RX_DMA_IRQ                  DMA2_Stream0_IRQn
+#endif
+
+/* DMA2 stream1 */
+#if defined(BSP_SPI4_TX_USING_DMA) && !defined(SPI4_TX_DMA_INSTANCE)
+#define SPI4_DMA_TX_IRQHandler           DMA2_Stream1_IRQHandler
+#define SPI4_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI4_TX_DMA_INSTANCE             DMA2_Stream1
+#define SPI4_TX_DMA_IRQ                  DMA2_Stream1_IRQn
+#endif
+
+/* DMA2 stream2 */
+#if defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_IRQHandler           DMA2_Stream2_IRQHandler
+#define SPI1_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_RX_DMA_INSTANCE             DMA2_Stream2
+#define SPI1_RX_DMA_IRQ                  DMA2_Stream2_IRQn
+#endif
+
+/* DMA2 stream3 */
+#if defined(BSP_SPI5_RX_USING_DMA) && !defined(SPI5_RX_DMA_INSTANCE)
+#define SPI5_DMA_RX_IRQHandler           DMA2_Stream3_IRQHandler
+#define SPI5_RX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_RX_DMA_INSTANCE             DMA2_Stream3
+#define SPI5_RX_DMA_IRQ                  DMA2_Stream3_IRQn
+#endif
+
+/* DMA2 stream4 */
+#if defined(BSP_SPI5_TX_USING_DMA) && !defined(SPI5_TX_DMA_INSTANCE)
+#define SPI5_DMA_TX_IRQHandler           DMA2_Stream4_IRQHandler
+#define SPI5_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_TX_DMA_INSTANCE             DMA2_Stream4
+#define SPI5_TX_DMA_IRQ                  DMA2_Stream4_IRQn
+#endif
+
+/* DMA2 stream5 */
+#if defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_TX_IRQHandler           DMA2_Stream5_IRQHandler
+#define SPI1_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI1_TX_DMA_INSTANCE             DMA2_Stream5
+#define SPI1_TX_DMA_IRQ                  DMA2_Stream5_IRQn
+#endif
+
+/* DMA2 stream6 */
+#if defined(BSP_SPI5_TX_USING_DMA) && !defined(SPI5_TX_DMA_INSTANCE)
+#define SPI5_DMA_TX_IRQHandler           DMA2_Stream6_IRQHandler
+#define SPI5_TX_DMA_RCC                  RCC_AHB1ENR_DMA2EN
+#define SPI5_TX_DMA_INSTANCE             DMA2_Stream6
+#define SPI5_TX_DMA_IRQ                  DMA2_Stream6_IRQn
+#endif
+
+/* DMA2 stream7 */
+#if defined(BSP_QSPI_USING_DMA) && !defined(QSPI_DMA_INSTANCE)
+#define QSPI_DMA_IRQHandler              DMA2_Stream7_IRQHandler
+#define QSPI_DMA_RCC                     RCC_AHB1ENR_DMA2EN
+#define QSPI_DMA_INSTANCE                DMA2_Stream7
+#define QSPI_DMA_IRQ                     DMA2_Stream7_IRQn
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DMA_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/h7/pwm_config.h

@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     zylx         first version
+ * 2022-04-14     Miaowulue    add PWM1
+ * 2023-04-08     Wangyuqiang  complete PWM defination
+ */
+
+#ifndef __PWM_CONFIG_H__
+#define __PWM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PWM1
+#define PWM1_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM1,         \
+       .name                    = "pwm1",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM1 */
+
+#ifdef BSP_USING_PWM2
+#define PWM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .name                    = "pwm2",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM2 */
+
+#ifdef BSP_USING_PWM3
+#define PWM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .name                    = "pwm3",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM3 */
+
+#ifdef BSP_USING_PWM4
+#define PWM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .name                    = "pwm4",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM4 */
+
+#ifdef BSP_USING_PWM5
+#define PWM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .name                    = "pwm5",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM5 */
+
+#ifdef BSP_USING_PWM6
+#define PWM6_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM6,         \
+       .name                    = "pwm6",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM6 */
+
+#ifdef BSP_USING_PWM7
+#define PWM7_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM7,         \
+       .name                    = "pwm7",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM7 */
+
+#ifdef BSP_USING_PWM8
+#define PWM8_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM8,         \
+       .name                    = "pwm8",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM8 */
+
+#ifdef BSP_USING_PWM9
+#define PWM9_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM9,         \
+       .name                    = "pwm9",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM9 */
+
+#ifdef BSP_USING_PWM10
+#define PWM10_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM10,        \
+       .name                    = "pwm10",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM10 */
+
+#ifdef BSP_USING_PWM11
+#define PWM11_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM11,        \
+       .name                    = "pwm11",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM11 */
+
+#ifdef BSP_USING_PWM12
+#define PWM12_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM12,        \
+       .name                    = "pwm12",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM12 */
+
+#ifdef BSP_USING_PWM13
+#define PWM13_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM13,        \
+       .name                    = "pwm13",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM13 */
+
+#ifdef BSP_USING_PWM14
+#define PWM14_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM14,        \
+       .name                    = "pwm14",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM14 */
+
+#ifdef BSP_USING_PWM15
+#define PWM15_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM15,        \
+       .name                    = "pwm15",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM15 */
+
+#ifdef BSP_USING_PWM16
+#define PWM16_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM16,        \
+       .name                    = "pwm16",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM16 */
+
+#ifdef BSP_USING_PWM17
+#define PWM17_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM17,        \
+       .name                    = "pwm17",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM17 */
+
+#ifdef BSP_USING_PWM18
+#define PWM18_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM18,        \
+       .name                    = "pwm18",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM18 */
+
+#ifdef BSP_USING_PWM19
+#define PWM19_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM19,        \
+       .name                    = "pwm19",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM19 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PWM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/h7/qspi_config.h

@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-22     zylx         first version
+ */
+
+#ifndef __QSPI_CONFIG_H__
+#define __QSPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_QSPI
+#ifndef QSPI_BUS_CONFIG
+#define QSPI_BUS_CONFIG                                        \
+    {                                                          \
+        .Instance = QUADSPI,                                   \
+        .Init.FifoThreshold = 4,                               \
+        .Init.SampleShifting = QSPI_SAMPLE_SHIFTING_HALFCYCLE, \
+        .Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_4_CYCLE,  \
+    }
+#endif /* QSPI_BUS_CONFIG */
+#endif /* BSP_USING_QSPI */
+
+#ifdef BSP_QSPI_USING_DMA
+#ifndef QSPI_DMA_CONFIG
+#define QSPI_DMA_CONFIG                                        \
+    {                                                          \
+        .Instance = QSPI_DMA_INSTANCE,                         \
+        .Init.Channel  = QSPI_DMA_CHANNEL,                     \
+        .Init.Direction = DMA_PERIPH_TO_MEMORY,                \
+        .Init.PeriphInc = DMA_PINC_DISABLE,                    \
+        .Init.MemInc = DMA_MINC_ENABLE,                        \
+        .Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE,       \
+        .Init.MemDataAlignment = DMA_MDATAALIGN_BYTE,          \
+        .Init.Mode = DMA_NORMAL,                               \
+        .Init.Priority = DMA_PRIORITY_LOW                      \
+    }
+#endif /* QSPI_DMA_CONFIG */
+#endif /* BSP_QSPI_USING_DMA */
+
+#define QSPI_IRQn                   QUADSPI_IRQn
+#define QSPI_IRQHandler             QUADSPI_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __QSPI_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/h7/sdio_config.h

@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     BalanceTWK   first version
+ */
+
+#ifndef __SDIO_CONFIG_H__
+#define __SDIO_CONFIG_H__
+
+#include <rtthread.h>
+#include "stm32h7xx_hal.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SDIO
+#define SDIO_BUS_CONFIG                                  \
+    {                                                    \
+        .Instance = SDMMC1,                              \
+        .dma_rx.dma_rcc = RCC_AHB1ENR_DMA2EN,            \
+        .dma_tx.dma_rcc = RCC_AHB1ENR_DMA2EN,            \
+        .dma_rx.Instance = DMA2_Stream3,                 \
+        .dma_rx.channel = DMA_CHANNEL_4,                 \
+        .dma_rx.dma_irq = DMA2_Stream3_IRQn,             \
+        .dma_tx.Instance = DMA2_Stream6,                 \
+        .dma_tx.channel = DMA_CHANNEL_4,                 \
+        .dma_tx.dma_irq = DMA2_Stream6_IRQn,             \
+    }
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SDIO_CONFIG_H__ */
+
+
+

libraries/HAL_Drivers/drivers/config/h7/spi_config.h

@@ -0,0 +1,199 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ */
+
+#ifndef __SPI_CONFIG_H__
+#define __SPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SPI1
+#ifndef SPI1_BUS_CONFIG
+#define SPI1_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI1,                           \
+        .bus_name = "spi1",                         \
+        .irq_type = SPI1_IRQn,                      \
+    }
+#endif /* SPI1_BUS_CONFIG */
+#endif /* BSP_USING_SPI1 */
+
+#ifdef BSP_SPI1_TX_USING_DMA
+#ifndef SPI1_TX_DMA_CONFIG
+#define SPI1_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_TX_DMA_RCC,                 \
+        .Instance = SPI1_TX_DMA_INSTANCE,           \
+        .dma_irq = SPI1_TX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_SPI1_TX              \
+    }
+#endif /* SPI1_TX_DMA_CONFIG */
+#endif /* BSP_SPI1_TX_USING_DMA */
+
+#ifdef BSP_SPI1_RX_USING_DMA
+#ifndef SPI1_RX_DMA_CONFIG
+#define SPI1_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_RX_DMA_RCC,                 \
+        .Instance = SPI1_RX_DMA_INSTANCE,           \
+        .dma_irq = SPI1_RX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_SPI1_RX              \
+    }
+#endif /* SPI1_RX_DMA_CONFIG */
+#endif /* BSP_SPI1_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI2
+#ifndef SPI2_BUS_CONFIG
+#define SPI2_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI2,                           \
+        .bus_name = "spi2",                         \
+        .irq_type = SPI2_IRQn,                      \
+    }
+#endif /* SPI2_BUS_CONFIG */
+#endif /* BSP_USING_SPI2 */
+
+#ifdef BSP_SPI2_TX_USING_DMA
+#ifndef SPI2_TX_DMA_CONFIG
+#define SPI2_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI2_TX_DMA_RCC,                 \
+        .Instance = SPI2_TX_DMA_INSTANCE,           \
+        .dma_irq = SPI2_TX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_SPI2_TX              \
+    }
+#endif /* SPI2_TX_DMA_CONFIG */
+#endif /* BSP_SPI2_TX_USING_DMA */
+
+#ifdef BSP_SPI2_RX_USING_DMA
+#ifndef SPI2_RX_DMA_CONFIG
+#define SPI2_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI2_RX_DMA_RCC,                 \
+        .Instance = SPI2_RX_DMA_INSTANCE,           \
+        .dma_irq = SPI2_RX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_SPI2_RX              \
+    }
+#endif /* SPI2_RX_DMA_CONFIG */
+#endif /* BSP_SPI2_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI3
+#ifndef SPI3_BUS_CONFIG
+#define SPI3_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI3,                           \
+        .bus_name = "spi3",                         \
+        .irq_type = SPI3_IRQn,                      \
+    }
+#endif /* SPI3_BUS_CONFIG */
+#endif /* BSP_USING_SPI3 */
+
+#ifdef BSP_SPI3_TX_USING_DMA
+#ifndef SPI3_TX_DMA_CONFIG
+#define SPI3_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI3_TX_DMA_RCC,                 \
+        .Instance = SPI3_TX_DMA_INSTANCE,           \
+        .dma_irq = SPI3_TX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_SPI3_TX              \
+    }
+#endif /* SPI3_TX_DMA_CONFIG */
+#endif /* BSP_SPI3_TX_USING_DMA */
+
+#ifdef BSP_SPI3_RX_USING_DMA
+#ifndef SPI3_RX_DMA_CONFIG
+#define SPI3_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI3_RX_DMA_RCC,                 \
+        .Instance = SPI3_RX_DMA_INSTANCE,           \
+        .dma_irq = SPI3_RX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_SPI3_RX              \
+    }
+#endif /* SPI3_RX_DMA_CONFIG */
+#endif /* BSP_SPI3_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI4
+#ifndef SPI4_BUS_CONFIG
+#define SPI4_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI4,                           \
+        .bus_name = "spi4",                         \
+        .irq_type = SPI4_IRQn,                      \
+    }
+#endif /* SPI4_BUS_CONFIG */
+#endif /* BSP_USING_SPI4 */
+
+#ifdef BSP_SPI4_TX_USING_DMA
+#ifndef SPI4_TX_DMA_CONFIG
+#define SPI4_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI4_TX_DMA_RCC,                 \
+        .Instance = SPI4_TX_DMA_INSTANCE,           \
+        .dma_irq = SPI4_TX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_SPI4_TX              \
+    }
+#endif /* SPI4_TX_DMA_CONFIG */
+#endif /* BSP_SPI4_TX_USING_DMA */
+
+#ifdef BSP_SPI4_RX_USING_DMA
+#ifndef SPI4_RX_DMA_CONFIG
+#define SPI4_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI4_RX_DMA_RCC,                 \
+        .Instance = SPI4_RX_DMA_INSTANCE,           \
+        .dma_irq = SPI4_RX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_SPI4_RX              \
+    }
+#endif /* SPI4_RX_DMA_CONFIG */
+#endif /* BSP_SPI4_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI5
+#ifndef SPI5_BUS_CONFIG
+#define SPI5_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI5,                           \
+        .bus_name = "spi5",                         \
+        .irq_type = SPI5_IRQn,                      \
+    }
+#endif /* SPI5_BUS_CONFIG */
+#endif /* BSP_USING_SPI5 */
+
+#ifdef BSP_SPI5_TX_USING_DMA
+#ifndef SPI5_TX_DMA_CONFIG
+#define SPI5_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI5_TX_DMA_RCC,                 \
+        .Instance = SPI5_TX_DMA_INSTANCE,           \
+        .dma_irq = SPI5_TX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_SPI5_TX              \
+    }
+#endif /* SPI5_TX_DMA_CONFIG */
+#endif /* BSP_SPI5_TX_USING_DMA */
+
+#ifdef BSP_SPI5_RX_USING_DMA
+#ifndef SPI5_RX_DMA_CONFIG
+#define SPI5_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI5_RX_DMA_RCC,                 \
+        .Instance = SPI5_RX_DMA_INSTANCE,           \
+        .dma_irq = SPI5_RX_DMA_IRQ,                 \
+        .request = DMA_REQUEST_SPI5_RX              \
+    }
+#endif /* SPI5_RX_DMA_CONFIG */
+#endif /* BSP_SPI5_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SPI_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/h7/tim_config.h

@@ -0,0 +1,67 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-11     zylx         first version
+ */
+
+#ifndef __TIM_CONFIG_H__
+#define __TIM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef TIM_DEV_INFO_CONFIG
+#define TIM_DEV_INFO_CONFIG                     \
+    {                                           \
+        .maxfreq = 1000000,                     \
+        .minfreq = 3000,                        \
+        .maxcnt  = 0xFFFF,                      \
+        .cntmode = HWTIMER_CNTMODE_UP,          \
+    }
+#endif /* TIM_DEV_INFO_CONFIG */
+
+#ifdef BSP_USING_TIM11
+#ifndef TIM11_CONFIG
+#define TIM11_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM11,                    \
+       .tim_irqn                = TIM1_TRG_COM_TIM11_IRQn,  \
+       .name                    = "timer11",                \
+    }
+#endif /* TIM11_CONFIG */
+#endif /* BSP_USING_TIM11 */
+
+#ifdef BSP_USING_TIM13
+#ifndef TIM13_CONFIG
+#define TIM13_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM13,                    \
+       .tim_irqn                = TIM8_UP_TIM13_IRQn,       \
+       .name                    = "timer13",                \
+    }
+#endif /* TIM13_CONFIG */
+#endif /* BSP_USING_TIM13 */
+
+#ifdef BSP_USING_TIM14
+#ifndef TIM14_CONFIG
+#define TIM14_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM14,                    \
+       .tim_irqn                = TIM8_TRG_COM_TIM14_IRQn,  \
+       .name                    = "timer14",                \
+    }
+#endif /* TIM14_CONFIG */
+#endif /* BSP_USING_TIM14 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/h7/uart_config.h

@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-10-30     SummerGift   first version
+ * 2019-01-05     zylx         modify dma support
+ * 2020-05-02     whj4674672   support stm32h7 uart dma
+ */
+
+#ifndef __UART_CONFIG_H__
+#define __UART_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_USING_UART1)
+#ifndef UART1_CONFIG
+#define UART1_CONFIG                                                \
+    {                                                               \
+        .name = "uart1",                                            \
+        .Instance = USART1,                                         \
+        .irq_type = USART1_IRQn,                                    \
+    }
+#endif /* UART1_CONFIG */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_UART1_RX_USING_DMA)
+#ifndef UART1_DMA_RX_CONFIG
+#define UART1_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART1_RX_DMA_INSTANCE,                          \
+        .request = UART1_RX_DMA_REQUEST,                            \
+        .dma_rcc = UART1_RX_DMA_RCC,                                \
+        .dma_irq = UART1_RX_DMA_IRQ,                                \
+    }
+#endif /* UART1_DMA_RX_CONFIG */
+#endif /* BSP_UART1_RX_USING_DMA */
+
+#if defined(BSP_USING_UART2)
+#ifndef UART2_CONFIG
+#define UART2_CONFIG                                                \
+    {                                                               \
+        .name = "uart2",                                            \
+        .Instance = USART2,                                         \
+        .irq_type = USART2_IRQn,                                    \
+    }
+#endif /* UART2_CONFIG */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_UART2_RX_USING_DMA)
+#ifndef UART2_DMA_RX_CONFIG
+#define UART2_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART2_RX_DMA_INSTANCE,                          \
+        .request = UART2_RX_DMA_REQUEST,                            \
+        .dma_rcc = UART2_RX_DMA_RCC,                                \
+        .dma_irq = UART2_RX_DMA_IRQ,                                \
+    }
+#endif /* UART2_DMA_RX_CONFIG */
+#endif /* BSP_UART2_RX_USING_DMA */
+#if defined(BSP_UART2_TX_USING_DMA)
+#ifndef UART2_DMA_TX_CONFIG
+#define UART2_DMA_TX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART2_TX_DMA_INSTANCE,                          \
+        .request = UART2_TX_DMA_REQUEST,                            \
+        .dma_rcc = UART2_TX_DMA_RCC,                                \
+        .dma_irq = UART2_TX_DMA_IRQ,                                \
+    }
+#endif /* UART2_DMA_TX_CONFIG */
+#endif /* BSP_UART2_TX_USING_DMA */
+
+#if defined(BSP_USING_UART3)
+#ifndef UART3_CONFIG
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_IRQn,                                    \
+    }
+#endif /* UART3_CONFIG */
+#endif /* BSP_USING_UART3 */
+
+#if defined(BSP_UART3_RX_USING_DMA)
+#ifndef UART3_DMA_RX_CONFIG
+#define UART3_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART3_RX_DMA_INSTANCE,                          \
+        .request = UART3_RX_DMA_REQUEST,                            \
+        .dma_rcc = UART3_RX_DMA_RCC,                                \
+        .dma_irq = UART3_RX_DMA_IRQ,                                \
+    }
+#endif /* UART3_DMA_RX_CONFIG */
+#endif /* BSP_UART3_RX_USING_DMA */
+
+#if defined(BSP_USING_UART4)
+#ifndef UART4_CONFIG
+#define UART4_CONFIG                                                \
+    {                                                               \
+        .name = "uart4",                                            \
+        .Instance = UART4,                                          \
+        .irq_type = UART4_IRQn,                                     \
+    }
+#endif /* UART4_CONFIG */
+#endif /* BSP_USING_UART4 */
+
+#if defined(BSP_UART4_RX_USING_DMA)
+#ifndef UART4_DMA_RX_CONFIG
+#define UART4_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART4_RX_DMA_INSTANCE,                          \
+        .request = UART4_RX_DMA_REQUEST,                            \
+        .dma_rcc = UART4_RX_DMA_RCC,                                \
+        .dma_irq = UART4_RX_DMA_IRQ,                                \
+    }
+#endif /* UART4_DMA_RX_CONFIG */
+#endif /* BSP_UART4_RX_USING_DMA */
+
+#if defined(BSP_USING_UART5)
+#ifndef UART5_CONFIG
+#define UART5_CONFIG                                                \
+    {                                                               \
+        .name = "uart5",                                            \
+        .Instance = UART5,                                          \
+        .irq_type = UART5_IRQn,                                     \
+    }
+#endif /* UART5_CONFIG */
+#endif /* BSP_USING_UART5 */
+
+#if defined(BSP_UART5_RX_USING_DMA)
+#ifndef UART5_DMA_RX_CONFIG
+#define UART5_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART5_RX_DMA_INSTANCE,                          \
+        .request = UART5_RX_DMA_REQUEST,                            \
+        .dma_rcc = UART5_RX_DMA_RCC,                                \
+        .dma_irq = UART5_RX_DMA_IRQ,                                \
+    }
+#endif /* UART5_DMA_RX_CONFIG */
+#endif /* BSP_UART5_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

libraries/HAL_Drivers/drivers/config/h7/usbd_config.h

@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-04-10     ZYH          first version
+ * 2019-10-27     flybreak     Compatible with the HS
+ */
+#ifndef __USBD_CONFIG_H__
+#define __USBD_CONFIG_H__
+
+#include <rtconfig.h>
+
+#ifdef BSP_USBD_TYPE_HS
+#define USBD_IRQ_TYPE     OTG_HS_IRQn
+#define USBD_IRQ_HANDLER  OTG_HS_IRQHandler
+#define USBD_INSTANCE     USB_OTG_HS
+#else
+#define USBD_IRQ_TYPE     OTG_FS_IRQn
+#define USBD_IRQ_HANDLER  OTG_FS_IRQHandler
+#define USBD_INSTANCE     USB_OTG_FS
+#endif
+
+#ifdef BSP_USBD_SPEED_HS
+#define USBD_PCD_SPEED    PCD_SPEED_HIGH
+#elif  BSP_USBD_SPEED_HSINFS
+#define USBD_PCD_SPEED    PCD_SPEED_HIGH_IN_FULL
+#else
+#define USBD_PCD_SPEED    PCD_SPEED_FULL
+#endif
+
+#ifdef BSP_USBD_PHY_ULPI
+#define USBD_PCD_PHY_MODULE    PCD_PHY_ULPI
+#elif  BSP_USBD_PHY_UTMI
+#define USBD_PCD_PHY_MODULE    PCD_PHY_UTMI
+#else
+#define USBD_PCD_PHY_MODULE    PCD_PHY_EMBEDDED
+#endif
+
+#endif

libraries/HAL_Drivers/drivers/config/l0/dma_config.h

@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-01-05     zylx         first version
+ * 2019-01-08     SummerGift   clean up the code
+ */
+
+#ifndef __DMA_CONFIG_H__
+#define __DMA_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* DMA1 channel1  */
+
+/* DMA1 channel5 */
+#if defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_DMA_RX_IRQHandler          DMA1_Channel4_5_6_7_IRQHandler
+#define UART1_RX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define UART1_RX_DMA_INSTANCE            DMA1_Channel5
+#define UART1_RX_DMA_IRQ                 DMA1_Channel4_5_6_7_IRQn
+#endif
+/* DMA1 channel5 */
+
+/* DMA1 channel6 */
+#if defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
+#define UART2_DMA_RX_IRQHandler          DMA1_Channel4_5_6_7_IRQHandler
+#define UART2_RX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define UART2_RX_DMA_INSTANCE            DMA1_Channel6
+#define UART2_RX_DMA_IRQ                 DMA1_Channel4_5_6_7_IRQn
+#endif
+/* DMA1 channel6 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DMA_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l0/uart_config.h

@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-10-30     zylx         first version
+ */
+
+#ifndef __UART_CONFIG_H__
+#define __UART_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_USING_UART1)
+#ifndef UART1_CONFIG
+#define UART1_CONFIG                                                \
+    {                                                               \
+        .name = "uart1",                                            \
+        .Instance = USART1,                                         \
+        .irq_type = USART1_IRQn,                                    \
+    }
+#endif /* UART1_CONFIG */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_UART1_RX_USING_DMA)
+#ifndef UART1_DMA_RX_CONFIG
+#define UART1_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART1_RX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART1_RX_DMA_RCC,                               \
+        .dma_irq  = UART1_RX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_RX_CONFIG */
+#endif /* BSP_UART1_RX_USING_DMA */
+
+#if defined(BSP_USING_UART2)
+#ifndef UART2_CONFIG
+#define UART2_CONFIG                                                \
+    {                                                               \
+        .name = "uart2",                                            \
+        .Instance = USART2,                                         \
+        .irq_type = USART2_IRQn,                                    \
+    }
+#endif /* UART2_CONFIG */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_UART2_RX_USING_DMA)
+#ifndef UART2_DMA_RX_CONFIG
+#define UART2_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART2_RX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART2_RX_DMA_RCC,                               \
+        .dma_irq  = UART2_RX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_RX_CONFIG */
+#endif /* BSP_UART2_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __UART_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l1/adc_config.h

@@ -0,0 +1,72 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-07     zylx         first version
+ */
+
+#ifndef __ADC_CONFIG_H__
+#define __ADC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_ADC1
+#ifndef ADC1_CONFIG
+#define ADC1_CONFIG                                                \
+    {                                                              \
+       .Instance                   = ADC1,                         \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,          \
+       .Init.ScanConvMode          = ADC_SCAN_DISABLE,             \
+       .Init.ContinuousConvMode    = DISABLE,                      \
+       .Init.NbrOfConversion       = 1,                            \
+       .Init.DiscontinuousConvMode = DISABLE,                      \
+       .Init.NbrOfDiscConversion   = 1,                            \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,           \
+    }
+#endif /* ADC1_CONFIG */
+#endif /* BSP_USING_ADC1 */
+
+#ifdef BSP_USING_ADC2
+#ifndef ADC2_CONFIG
+#define ADC2_CONFIG                                                \
+    {                                                              \
+       .Instance                   = ADC2,                         \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,          \
+       .Init.ScanConvMode          = ADC_SCAN_DISABLE,             \
+       .Init.ContinuousConvMode    = DISABLE,                      \
+       .Init.NbrOfConversion       = 1,                            \
+       .Init.DiscontinuousConvMode = DISABLE,                      \
+       .Init.NbrOfDiscConversion   = 1,                            \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,           \
+    }
+#endif /* ADC2_CONFIG */
+#endif /* BSP_USING_ADC2 */
+
+#ifdef BSP_USING_ADC3
+#ifndef ADC3_CONFIG
+#define ADC3_CONFIG                                                \
+    {                                                              \
+       .Instance                   = ADC3,                         \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,          \
+       .Init.ScanConvMode          = ADC_SCAN_DISABLE,             \
+       .Init.ContinuousConvMode    = DISABLE,                      \
+       .Init.NbrOfConversion       = 1,                            \
+       .Init.DiscontinuousConvMode = DISABLE,                      \
+       .Init.NbrOfDiscConversion   = 1,                            \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,           \
+    }
+#endif /* ADC3_CONFIG */
+#endif /* BSP_USING_ADC3 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ADC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l1/dma_config.h

@@ -0,0 +1,127 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-01-02     SummerGift   first version
+ * 2019-01-08     SummerGift   clean up the code
+ */
+
+#ifndef __DMA_CONFIG_H__
+#define __DMA_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* DMA1 channel1 */
+/* DMA1 channel2 */
+#if defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_IRQHandler          DMA1_Channel2_IRQHandler
+#define SPI1_RX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI1_RX_DMA_INSTANCE            DMA1_Channel2
+#define SPI1_RX_DMA_IRQ                 DMA1_Channel2_IRQn
+#elif defined(BSP_UART3_TX_USING_DMA) && !defined(UART3_TX_DMA_INSTANCE)
+#define UART3_DMA_TX_IRQHandler         DMA1_Channel2_IRQHandler
+#define UART3_TX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART3_TX_DMA_INSTANCE           DMA1_Channel2
+#define UART3_TX_DMA_IRQ                DMA1_Channel2_IRQn
+#endif
+
+/* DMA1 channel3 */
+#if defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_TX_IRQHandler          DMA1_Channel3_IRQHandler
+#define SPI1_TX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI1_TX_DMA_INSTANCE            DMA1_Channel3
+#define SPI1_TX_DMA_IRQ                 DMA1_Channel3_IRQn
+#elif defined(BSP_UART3_RX_USING_DMA) && !defined(UART3_RX_DMA_INSTANCE)
+#define UART3_DMA_RX_IRQHandler         DMA1_Channel3_IRQHandler
+#define UART3_RX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART3_RX_DMA_INSTANCE           DMA1_Channel3
+#define UART3_RX_DMA_IRQ                DMA1_Channel3_IRQn
+#endif
+
+/* DMA1 channel4 */
+#if defined(BSP_SPI2_RX_USING_DMA) && !defined(SPI2_RX_DMA_INSTANCE)
+#define SPI2_DMA_RX_IRQHandler          DMA1_Channel4_IRQHandler
+#define SPI2_RX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI2_RX_DMA_INSTANCE            DMA1_Channel4
+#define SPI2_RX_DMA_IRQ                 DMA1_Channel4_IRQn
+#elif defined(BSP_UART1_TX_USING_DMA) && !defined(UART1_TX_DMA_INSTANCE)
+#define UART1_DMA_TX_IRQHandler         DMA1_Channel4_IRQHandler
+#define UART1_TX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART1_TX_DMA_INSTANCE           DMA1_Channel4
+#define UART1_TX_DMA_IRQ                DMA1_Channel4_IRQn
+#endif
+
+/* DMA1 channel5 */
+#if defined(BSP_SPI2_TX_USING_DMA) && !defined(SPI2_TX_DMA_INSTANCE)
+#define SPI2_DMA_TX_IRQHandler          DMA1_Channel5_IRQHandler
+#define SPI2_TX_DMA_RCC                 RCC_AHBENR_DMA1EN
+#define SPI2_TX_DMA_INSTANCE            DMA1_Channel5
+#define SPI2_TX_DMA_IRQ                 DMA1_Channel5_IRQn
+
+#elif defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_DMA_RX_IRQHandler         DMA1_Channel5_IRQHandler
+#define UART1_RX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART1_RX_DMA_INSTANCE           DMA1_Channel5
+#define UART1_RX_DMA_IRQ                DMA1_Channel5_IRQn
+#endif
+
+/* DMA1 channel6 */
+#if defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
+#define UART2_DMA_RX_IRQHandler         DMA1_Channel6_IRQHandler
+#define UART2_RX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART2_RX_DMA_INSTANCE           DMA1_Channel6
+#define UART2_RX_DMA_IRQ                DMA1_Channel6_IRQn
+#endif
+
+/* DMA1 channel7 */
+#if defined(BSP_UART2_TX_USING_DMA) && !defined(UART2_TX_DMA_INSTANCE)
+#define UART2_DMA_TX_IRQHandler         DMA1_Channel7_IRQHandler
+#define UART2_TX_DMA_RCC                RCC_AHBENR_DMA1EN
+#define UART2_TX_DMA_INSTANCE           DMA1_Channel7
+#define UART2_TX_DMA_IRQ                DMA1_Channel7_IRQn
+#endif
+
+/* DMA2 channel1 */
+#if defined(BSP_SPI3_RX_USING_DMA) && !defined(SPI3_RX_DMA_INSTANCE)
+#define SPI3_DMA_RX_IRQHandler          DMA2_Channel1_IRQHandler
+#define SPI3_RX_DMA_RCC                 RCC_AHBENR_DMA2EN
+#define SPI3_RX_DMA_INSTANCE            DMA2_Channel1
+#define SPI3_RX_DMA_IRQ                 DMA2_Channel1_IRQn
+#endif
+
+/* DMA2 channel2 */
+#if defined(BSP_SPI3_TX_USING_DMA) && !defined(SPI3_TX_DMA_INSTANCE)
+#define SPI3_DMA_TX_IRQHandler          DMA2_Channel2_IRQHandler
+#define SPI3_TX_DMA_RCC                 RCC_AHBENR_DMA2EN
+#define SPI3_TX_DMA_INSTANCE            DMA2_Channel2
+#define SPI3_TX_DMA_IRQ                 DMA2_Channel2_IRQn
+#endif
+
+/* DMA2 channel3 */
+#if defined(BSP_UART4_RX_USING_DMA) && !defined(UART4_RX_DMA_INSTANCE)
+#define UART4_DMA_RX_IRQHandler         DMA2_Channel3_IRQHandler
+#define UART4_RX_DMA_RCC                RCC_AHBENR_DMA2EN
+#define UART4_RX_DMA_INSTANCE           DMA2_Channel3
+#define UART4_RX_DMA_IRQ                DMA2_Channel3_IRQn
+#endif
+/* DMA2 channel4 */
+/* DMA2 channel5 */
+#if defined(BSP_UART4_TX_USING_DMA) && !defined(UART4_TX_DMA_INSTANCE)
+#define UART4_DMA_TX_IRQHandler         DMA2_Channel4_5_IRQHandler
+#define UART4_TX_DMA_RCC                RCC_AHBENR_DMA2EN
+#define UART4_TX_DMA_INSTANCE           DMA2_Channel5
+#define UART4_TX_DMA_IRQ                DMA2_Channel4_5_IRQn
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DMA_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l1/pulse_encoder_config.h

@@ -0,0 +1,68 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-08-23     balanceTWK   first version
+ */
+
+#ifndef __PULSE_ENCODER_CONFIG_H__
+#define __PULSE_ENCODER_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PULSE_ENCODER1
+#ifndef PULSE_ENCODER1_CONFIG
+#define PULSE_ENCODER1_CONFIG                     \
+    {                                             \
+       .tim_handler.Instance     = TIM1,          \
+       .encoder_irqn             = TIM1_UP_IRQn,  \
+       .name                     = "pulse1"       \
+    }
+#endif /* PULSE_ENCODER1_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER1 */
+
+#ifdef BSP_USING_PULSE_ENCODER2
+#ifndef PULSE_ENCODER2_CONFIG
+#define PULSE_ENCODER2_CONFIG                  \
+    {                                          \
+       .tim_handler.Instance     = TIM2,       \
+       .encoder_irqn             = TIM2_IRQn,  \
+       .name                     = "pulse2"    \
+    }
+#endif /* PULSE_ENCODER2_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER2 */
+
+#ifdef BSP_USING_PULSE_ENCODER3
+#ifndef PULSE_ENCODER3_CONFIG
+#define PULSE_ENCODER3_CONFIG                  \
+    {                                          \
+       .tim_handler.Instance     = TIM3,       \
+       .encoder_irqn             = TIM3_IRQn,  \
+       .name                     = "pulse3"    \
+    }
+#endif /* PULSE_ENCODER3_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER3 */
+
+#ifdef BSP_USING_PULSE_ENCODER4
+#ifndef PULSE_ENCODER4_CONFIG
+#define PULSE_ENCODER4_CONFIG                  \
+    {                                          \
+       .tim_handler.Instance     = TIM4,       \
+       .encoder_irqn             = TIM4_IRQn,  \
+       .name                     = "pulse4"    \
+    }
+#endif /* PULSE_ENCODER4_CONFIG */
+#endif /* BSP_USING_PULSE_ENCODER4 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PULSE_ENCODER_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l1/pwm_config.h

@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     zylx         first version
+ * 2023-04-08     Wangyuqiang  complete PWM defination
+ */
+
+#ifndef __PWM_CONFIG_H__
+#define __PWM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PWM1
+#define PWM1_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM1,         \
+       .name                    = "pwm1",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM1 */
+
+#ifdef BSP_USING_PWM2
+#define PWM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .name                    = "pwm2",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM2 */
+
+#ifdef BSP_USING_PWM3
+#define PWM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .name                    = "pwm3",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM3 */
+
+#ifdef BSP_USING_PWM4
+#define PWM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .name                    = "pwm4",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM4 */
+
+#ifdef BSP_USING_PWM5
+#define PWM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .name                    = "pwm5",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM5 */
+
+#ifdef BSP_USING_PWM6
+#define PWM6_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM6,         \
+       .name                    = "pwm6",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM6 */
+
+#ifdef BSP_USING_PWM7
+#define PWM7_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM7,         \
+       .name                    = "pwm7",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM7 */
+
+#ifdef BSP_USING_PWM8
+#define PWM8_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM8,         \
+       .name                    = "pwm8",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM8 */
+
+#ifdef BSP_USING_PWM9
+#define PWM9_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM9,         \
+       .name                    = "pwm9",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM9 */
+
+#ifdef BSP_USING_PWM10
+#define PWM10_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM10,        \
+       .name                    = "pwm10",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM10 */
+
+#ifdef BSP_USING_PWM11
+#define PWM11_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM11,        \
+       .name                    = "pwm11",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM11 */
+
+#ifdef BSP_USING_PWM12
+#define PWM12_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM12,        \
+       .name                    = "pwm12",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM12 */
+
+#ifdef BSP_USING_PWM13
+#define PWM13_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM13,        \
+       .name                    = "pwm13",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM13 */
+
+#ifdef BSP_USING_PWM14
+#define PWM14_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM14,        \
+       .name                    = "pwm14",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM14 */
+
+#ifdef BSP_USING_PWM15
+#define PWM15_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM15,        \
+       .name                    = "pwm15",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM15 */
+
+#ifdef BSP_USING_PWM16
+#define PWM16_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM16,        \
+       .name                    = "pwm16",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM16 */
+
+#ifdef BSP_USING_PWM17
+#define PWM17_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM17,        \
+       .name                    = "pwm17",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM17 */
+
+#ifdef BSP_USING_PWM18
+#define PWM18_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM18,        \
+       .name                    = "pwm18",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM18 */
+
+#ifdef BSP_USING_PWM19
+#define PWM19_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM19,        \
+       .name                    = "pwm19",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM19 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PWM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l1/sdio_config.h

@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     BalanceTWK   first version
+ */
+
+#ifndef __SDIO_CONFIG_H__
+#define __SDIO_CONFIG_H__
+
+#include <rtthread.h>
+#include "stm32l1xx_hal.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SDIO
+#define SDIO_BUS_CONFIG                                  \
+    {                                                    \
+        .Instance = SDIO,                                \
+        .dma_rx.dma_rcc = RCC_AHBENR_DMA2EN,             \
+        .dma_tx.dma_rcc = RCC_AHBENR_DMA2EN,             \
+        .dma_rx.Instance = DMA2_Channel4,                \
+        .dma_rx.dma_irq = DMA2_Channel4_IRQn,            \
+        .dma_tx.Instance = DMA2_Channel4,                \
+        .dma_tx.dma_irq = DMA2_Channel4_IRQn,            \
+    }
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SDIO_CONFIG_H__ */
+
+
+

libraries/HAL_Drivers/drivers/config/l1/spi_config.h

@@ -0,0 +1,127 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ * 2019-01-05     SummerGift   modify DMA support
+ */
+
+#ifndef __SPI_CONFIG_H__
+#define __SPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SPI1
+#ifndef SPI1_BUS_CONFIG
+#define SPI1_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI1,                           \
+        .bus_name = "spi1",                         \
+        .irq_type = SPI1_IRQn,                      \
+    }
+#endif /* SPI1_BUS_CONFIG */
+#endif /* BSP_USING_SPI1 */
+
+#ifdef BSP_SPI1_TX_USING_DMA
+#ifndef SPI1_TX_DMA_CONFIG
+#define SPI1_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_TX_DMA_RCC,                 \
+        .Instance = SPI1_TX_DMA_INSTANCE,           \
+        .dma_irq = SPI1_TX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_TX_DMA_CONFIG */
+#endif /* BSP_SPI1_TX_USING_DMA */
+
+#ifdef BSP_SPI1_RX_USING_DMA
+#ifndef SPI1_RX_DMA_CONFIG
+#define SPI1_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc = SPI1_RX_DMA_RCC,                 \
+        .Instance = SPI1_RX_DMA_INSTANCE,           \
+        .dma_irq = SPI1_RX_DMA_IRQ,                 \
+    }
+#endif /* SPI1_RX_DMA_CONFIG */
+#endif /* BSP_SPI1_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI2
+#ifndef SPI2_BUS_CONFIG
+#define SPI2_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI2,                           \
+        .bus_name = "spi2",                         \
+        .irq_type = SPI2_IRQn,                      \
+    }
+#endif /* SPI2_BUS_CONFIG */
+#endif /* BSP_USING_SPI2 */
+
+#ifdef BSP_SPI2_TX_USING_DMA
+#ifndef SPI2_TX_DMA_CONFIG
+#define SPI2_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc  = SPI2_TX_DMA_RCC,                \
+        .Instance = SPI2_TX_DMA_INSTANCE,           \
+        .dma_irq  = SPI2_TX_DMA_IRQ,                \
+    }
+#endif /* SPI2_TX_DMA_CONFIG */
+#endif /* BSP_SPI2_TX_USING_DMA */
+
+#ifdef BSP_SPI2_RX_USING_DMA
+#ifndef SPI2_RX_DMA_CONFIG
+#define SPI2_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc  = SPI2_RX_DMA_RCC,                \
+        .Instance = SPI2_RX_DMA_INSTANCE,           \
+        .dma_irq  = SPI2_RX_DMA_IRQ,                \
+    }
+#endif /* SPI2_RX_DMA_CONFIG */
+#endif /* BSP_SPI2_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI3
+#ifndef SPI3_BUS_CONFIG
+#define SPI3_BUS_CONFIG                             \
+    {                                               \
+        .Instance = SPI3,                           \
+        .bus_name = "spi3",                         \
+        .irq_type = SPI3_IRQn,                      \
+    }
+#endif /* SPI3_BUS_CONFIG */
+#endif /* BSP_USING_SPI3 */
+
+#ifdef BSP_SPI3_TX_USING_DMA
+#ifndef SPI3_TX_DMA_CONFIG
+#define SPI3_TX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc  = SPI3_TX_DMA_RCC,                \
+        .Instance = SPI3_TX_DMA_INSTANCE,           \
+        .dma_irq  = SPI3_TX_DMA_IRQ,                \
+    }
+#endif /* SPI3_TX_DMA_CONFIG */
+#endif /* BSP_SPI3_TX_USING_DMA */
+
+#ifdef BSP_SPI3_RX_USING_DMA
+#ifndef SPI3_RX_DMA_CONFIG
+#define SPI3_RX_DMA_CONFIG                          \
+    {                                               \
+        .dma_rcc  = SPI3_RX_DMA_RCC,                \
+        .Instance = SPI3_RX_DMA_INSTANCE,           \
+        .dma_irq  = SPI3_RX_DMA_IRQ,                \
+    }
+#endif /* SPI3_RX_DMA_CONFIG */
+#endif /* BSP_SPI3_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SPI_CONFIG_H__ */
+
+
+

libraries/HAL_Drivers/drivers/config/l1/tim_config.h

@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-11     zylx         first version
+ */
+
+#ifndef __TIM_CONFIG_H__
+#define __TIM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef TIM_DEV_INFO_CONFIG
+#define TIM_DEV_INFO_CONFIG                     \
+    {                                           \
+        .maxfreq = 1000000,                     \
+        .minfreq = 2000,                        \
+        .maxcnt  = 0xFFFF,                      \
+        .cntmode = HWTIMER_CNTMODE_UP,          \
+    }
+#endif /* TIM_DEV_INFO_CONFIG */
+
+#ifdef BSP_USING_TIM2
+#ifndef TIM2_CONFIG
+#define TIM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .tim_irqn                = TIM2_IRQn,    \
+       .name                    = "timer2",     \
+    }
+#endif /* TIM2_CONFIG */
+#endif /* BSP_USING_TIM2 */
+
+#ifdef BSP_USING_TIM3
+#ifndef TIM3_CONFIG
+#define TIM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .tim_irqn                = TIM3_IRQn,    \
+       .name                    = "timer3",     \
+    }
+#endif /* TIM3_CONFIG */
+#endif /* BSP_USING_TIM3 */
+
+#ifdef BSP_USING_TIM4
+#ifndef TIM4_CONFIG
+#define TIM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .tim_irqn                = TIM4_IRQn,    \
+       .name                    = "timer4",     \
+    }
+#endif /* TIM4_CONFIG */
+#endif /* BSP_USING_TIM4 */
+
+#ifdef BSP_USING_TIM5
+#ifndef TIM5_CONFIG
+#define TIM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .tim_irqn                = TIM5_IRQn,    \
+       .name                    = "timer5",     \
+    }
+#endif /* TIM5_CONFIG */
+#endif /* BSP_USING_TIM5 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l1/uart_config.h

@@ -0,0 +1,178 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-10-30     BalanceTWK   first version
+ * 2019-01-05     SummerGift   modify DMA support
+ */
+
+#ifndef __UART_CONFIG_H__
+#define __UART_CONFIG_H__
+
+#include <rtthread.h>
+#include "dma_config.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_USING_UART1)
+#ifndef UART1_CONFIG
+#define UART1_CONFIG                                                \
+    {                                                               \
+        .name = "uart1",                                            \
+        .Instance = USART1,                                         \
+        .irq_type = USART1_IRQn,                                    \
+    }
+#endif /* UART1_CONFIG */
+
+#if defined(BSP_UART1_RX_USING_DMA)
+#ifndef UART1_DMA_RX_CONFIG
+#define UART1_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART1_RX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART1_RX_DMA_RCC,                               \
+        .dma_irq  = UART1_RX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_RX_CONFIG */
+#endif /* BSP_UART1_RX_USING_DMA */
+
+#if defined(BSP_UART1_TX_USING_DMA)
+#ifndef UART1_DMA_TX_CONFIG
+#define UART1_DMA_TX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART1_TX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART1_TX_DMA_RCC,                               \
+        .dma_irq  = UART1_TX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_TX_CONFIG */
+#endif /* BSP_UART1_TX_USING_DMA */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_USING_UART2)
+#ifndef UART2_CONFIG
+#define UART2_CONFIG                                                \
+    {                                                               \
+        .name = "uart2",                                            \
+        .Instance = USART2,                                         \
+        .irq_type = USART2_IRQn,                                    \
+    }
+#endif /* UART2_CONFIG */
+
+#if defined(BSP_UART2_RX_USING_DMA)
+#ifndef UART2_DMA_RX_CONFIG
+#define UART2_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART2_RX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART2_RX_DMA_RCC,                               \
+        .dma_irq  = UART2_RX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_RX_CONFIG */
+#endif /* BSP_UART2_RX_USING_DMA */
+
+#if defined(BSP_UART2_TX_USING_DMA)
+#ifndef UART2_DMA_TX_CONFIG
+#define UART2_DMA_TX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART2_TX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART2_TX_DMA_RCC,                               \
+        .dma_irq  = UART2_TX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_TX_CONFIG */
+#endif /* BSP_UART2_TX_USING_DMA */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_USING_UART3)
+#ifndef UART3_CONFIG
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_IRQn,                                    \
+    }
+#endif /* UART3_CONFIG */
+
+#if defined(BSP_UART3_RX_USING_DMA)
+#ifndef UART3_DMA_RX_CONFIG
+#define UART3_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART3_RX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART3_RX_DMA_RCC,                               \
+        .dma_irq  = UART3_RX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_RX_CONFIG */
+#endif /* BSP_UART3_RX_USING_DMA */
+
+#if defined(BSP_UART3_TX_USING_DMA)
+#ifndef UART3_DMA_TX_CONFIG
+#define UART3_DMA_TX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART3_TX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART3_TX_DMA_RCC,                               \
+        .dma_irq  = UART3_TX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_TX_CONFIG */
+#endif /* BSP_UART3_TX_USING_DMA */
+#endif /* BSP_USING_UART3 */
+
+#if defined(BSP_USING_UART4)
+#ifndef UART4_CONFIG
+#define UART4_CONFIG                                                \
+    {                                                               \
+        .name = "uart4",                                            \
+        .Instance = UART4,                                          \
+        .irq_type = UART4_IRQn,                                     \
+    }
+#endif /* UART4_CONFIG */
+
+#if defined(BSP_UART4_RX_USING_DMA)
+#ifndef UART4_DMA_RX_CONFIG
+#define UART4_DMA_RX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART4_RX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART4_RX_DMA_RCC,                               \
+        .dma_irq  = UART4_RX_DMA_IRQ,                               \
+    }
+#endif /* UART4_DMA_RX_CONFIG */
+#endif /* BSP_UART4_RX_USING_DMA */
+
+#if defined(BSP_UART4_TX_USING_DMA)
+#ifndef UART4_DMA_TX_CONFIG
+#define UART4_DMA_TX_CONFIG                                         \
+    {                                                               \
+        .Instance = UART4_TX_DMA_INSTANCE,                          \
+        .dma_rcc  = UART4_TX_DMA_RCC,                               \
+        .dma_irq  = UART4_TX_DMA_IRQ,                               \
+    }
+#endif /* UART4_DMA_TX_CONFIG */
+#endif /* BSP_UART4_TX_USING_DMA */
+#endif /* BSP_USING_UART4 */
+
+#if defined(BSP_USING_UART5)
+#ifndef UART5_CONFIG
+#define UART5_CONFIG                                                \
+    {                                                               \
+        .name = "uart5",                                            \
+        .Instance = UART5,                                          \
+        .irq_type = UART5_IRQn,                                     \
+    }
+#endif /* UART5_CONFIG */
+#endif /* BSP_USING_UART5 */
+
+#if defined(BSP_UART5_RX_USING_DMA)
+#ifndef UART5_DMA_RX_CONFIG
+#define UART5_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = DMA_NOT_AVAILABLE,                              \
+    }
+#endif /* UART5_DMA_RX_CONFIG */
+#endif /* BSP_UART5_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

libraries/HAL_Drivers/drivers/config/l1/usbd_config.h

@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-04-10     ZYH          first version
+ * 2019-07-29     Chinese66    change from f4 to f1
+ */
+#ifndef __USBD_CONFIG_H__
+#define __USBD_CONFIG_H__
+
+#define USBD_IRQ_TYPE        USB_LP_IRQn
+#define USBD_IRQ_HANDLER     USB_LP_IRQHandler
+#define USBD_INSTANCE        USB
+#define USBD_PCD_SPEED       PCD_SPEED_FULL
+#define USBD_PCD_PHY_MODULE  PCD_PHY_EMBEDDED
+
+#ifndef BSP_USB_CONNECT_PIN
+#define BSP_USB_CONNECT_PIN  -1
+#endif
+
+#ifndef BSP_USB_PULL_UP_STATUS
+#define BSP_USB_PULL_UP_STATUS  1
+#endif
+#endif

libraries/HAL_Drivers/drivers/config/l4/adc_config.h

@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-07     zylx         first version
+ */
+
+#ifndef __ADC_CONFIG_H__
+#define __ADC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_ADC1
+#ifndef ADC1_CONFIG
+#define ADC1_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC1,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = ADC_SCAN_DISABLE,              \
+       .Init.EOCSelection          = ADC_EOC_SINGLE_CONV,           \
+       .Init.LowPowerAutoWait      = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 1,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+       .Init.Overrun               = ADC_OVR_DATA_OVERWRITTEN,      \
+    }
+#endif /* ADC1_CONFIG */
+#endif /* BSP_USING_ADC1 */
+
+#ifdef BSP_USING_ADC2
+#ifndef ADC2_CONFIG
+#define ADC2_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC2,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = ADC_SCAN_DISABLE,              \
+       .Init.EOCSelection          = ADC_EOC_SINGLE_CONV,           \
+       .Init.LowPowerAutoWait      = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 1,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+       .Init.Overrun               = ADC_OVR_DATA_OVERWRITTEN,      \
+    }
+#endif /* ADC2_CONFIG */
+#endif /* BSP_USING_ADC2 */
+
+#ifdef BSP_USING_ADC3
+#ifndef ADC3_CONFIG
+#define ADC3_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC3,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = ADC_SCAN_DISABLE,              \
+       .Init.EOCSelection          = ADC_EOC_SINGLE_CONV,           \
+       .Init.LowPowerAutoWait      = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 1,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+       .Init.Overrun               = ADC_OVR_DATA_OVERWRITTEN,      \
+    }
+#endif /* ADC3_CONFIG */
+#endif /* BSP_USING_ADC3 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ADC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l4/dac_config.h

@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-06-16     thread-liu   first version
+ */
+
+#ifndef __DAC_CONFIG_H__
+#define __DAC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_DAC1
+#ifndef DAC1_CONFIG
+#define DAC1_CONFIG                                                    \
+    {                                                                  \
+       .Instance                      = DAC1,                          \
+    }
+#endif /* DAC2_CONFIG */
+#endif /* BSP_USING_DAC2 */
+
+#ifdef BSP_USING_DAC2
+#ifndef DAC2_CONFIG
+#define DAC2_CONFIG                                                    \
+    {                                                                  \
+       .Instance                      = DAC2,                          \
+    }
+#endif /* DAC2_CONFIG */
+#endif /* BSP_USING_DAC2 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DAC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l4/dma_config.h

@@ -0,0 +1,266 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-01-05     zylx         first version
+ * 2019-01-08     SummerGift   clean up the code
+ * 2019-12-01     armink       add DMAMUX support
+ */
+
+#ifndef __DMA_CONFIG_H__
+#define __DMA_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* DMA1 channel1 */
+
+/* DMA1 channel2 */
+#if defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_IRQHandler          DMA1_Channel2_IRQHandler
+#define SPI1_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define SPI1_RX_DMA_INSTANCE            DMA1_Channel2
+#if defined(DMAMUX1) /* for L4+ */
+#define SPI1_RX_DMA_REQUEST             DMA_REQUEST_SPI1_RX
+#else /* for L4 */
+#define SPI1_RX_DMA_REQUEST             DMA_REQUEST_1
+#endif /* DMAMUX1 */
+#define SPI1_RX_DMA_IRQ                 DMA1_Channel2_IRQn
+#endif
+
+/* DMA1 channel3 */
+#if defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_TX_IRQHandler          DMA1_Channel3_IRQHandler
+#define SPI1_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define SPI1_TX_DMA_INSTANCE            DMA1_Channel3
+#if defined(DMAMUX1) /* for L4+ */
+#define SPI1_TX_DMA_REQUEST             DMA_REQUEST_SPI1_TX
+#else /* for L4 */
+#define SPI1_TX_DMA_REQUEST             DMA_REQUEST_1
+#endif /* DMAMUX1 */
+#define SPI1_TX_DMA_IRQ                 DMA1_Channel3_IRQn
+#elif defined(BSP_UART3_RX_USING_DMA) && !defined(UART3_RX_DMA_INSTANCE)
+#define UART3_DMA_RX_IRQHandler         DMA1_Channel3_IRQHandler
+#define UART3_RX_DMA_RCC                RCC_AHB1ENR_DMA1EN
+#define UART3_RX_DMA_INSTANCE           DMA1_Channel3
+#if defined(DMAMUX1) /* for L4+ */
+#define UART3_RX_DMA_REQUEST            DMA_REQUEST_USART3_RX
+#else /* for L4 */
+#define UART3_RX_DMA_REQUEST            DMA_REQUEST_2
+#endif /* DMAMUX1 */
+#define UART3_RX_DMA_IRQ                DMA1_Channel3_IRQn
+#endif
+
+/* DMA1 channel4 */
+#if defined(BSP_UART1_TX_USING_DMA) && !defined(UART1_TX_DMA_INSTANCE)
+#define UART1_DMA_TX_IRQHandler         DMA1_Channel4_IRQHandler
+#define UART1_TX_DMA_RCC                RCC_AHB1ENR_DMA1EN
+#define UART1_TX_DMA_INSTANCE           DMA1_Channel4
+#if defined(DMAMUX1) /* for L4+ */
+#define UART1_TX_DMA_REQUEST            DMA_REQUEST_USART1_TX
+#else /* for L4 */
+#define UART1_TX_DMA_REQUEST            DMA_REQUEST_2
+#endif /* DMAMUX1 */
+#define UART1_TX_DMA_IRQ                DMA1_Channel4_IRQn
+#elif defined(BSP_SPI2_RX_USING_DMA) && !defined(SPI2_RX_DMA_INSTANCE)
+#define SPI2_DMA_RX_IRQHandler          DMA1_Channel4_IRQHandler
+#define SPI2_RX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define SPI2_RX_DMA_INSTANCE            DMA1_Channel4
+#if defined(DMAMUX1) /* for L4+ */
+#define SPI2_RX_DMA_REQUEST             DMA_REQUEST_SPI2_RX
+#else /* for L4 */
+#define SPI2_RX_DMA_REQUEST             DMA_REQUEST_1
+#endif /* DMAMUX1 */
+#define SPI2_RX_DMA_IRQ                 DMA1_Channel4_IRQn
+#endif
+
+/* DMA1 channel5 */
+#if defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_DMA_RX_IRQHandler         DMA1_Channel5_IRQHandler
+#define UART1_RX_DMA_RCC                RCC_AHB1ENR_DMA1EN
+#define UART1_RX_DMA_INSTANCE           DMA1_Channel5
+#if defined(DMAMUX1) /* for L4+ */
+#define UART1_RX_DMA_REQUEST            DMA_REQUEST_USART1_RX
+#else /* for L4 */
+#define UART1_RX_DMA_REQUEST            DMA_REQUEST_2
+#endif /* DMAMUX1 */
+#define UART1_RX_DMA_IRQ                DMA1_Channel5_IRQn
+#elif defined(BSP_QSPI_USING_DMA) && !defined(QSPI_DMA_INSTANCE)
+#define QSPI_DMA_IRQHandler             DMA1_Channel5_IRQHandler
+#define QSPI_DMA_RCC                    RCC_AHB1ENR_DMA1EN
+#define QSPI_DMA_INSTANCE               DMA1_Channel5
+#if defined(DMAMUX1) /* for L4+ */
+#define QSPI_DMA_REQUEST                DMA_REQUEST_OCTOSPI1
+#else /* for L4 */
+#define QSPI_DMA_REQUEST                DMA_REQUEST_5
+#endif /* DMAMUX1 */
+#define QSPI_DMA_IRQ                    DMA1_Channel5_IRQn
+#elif defined(BSP_SPI2_TX_USING_DMA) && !defined(SPI2_TX_DMA_INSTANCE)
+#define SPI2_DMA_TX_IRQHandler          DMA1_Channel5_IRQHandler
+#define SPI2_TX_DMA_RCC                 RCC_AHB1ENR_DMA1EN
+#define SPI2_TX_DMA_INSTANCE            DMA1_Channel5
+#if defined(DMAMUX1) /* for L4+ */
+#define SPI2_TX_DMA_REQUEST             DMA_REQUEST_SPI2_TX
+#else /* for L4 */
+#define SPI2_TX_DMA_REQUEST             DMA_REQUEST_1
+#endif /* DMAMUX1 */
+#define SPI2_TX_DMA_IRQ                 DMA1_Channel5_IRQn
+#endif
+
+/* DMA1 channel6 */
+#if defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
+#define UART2_DMA_RX_IRQHandler         DMA1_Channel6_IRQHandler
+#define UART2_RX_DMA_RCC                RCC_AHB1ENR_DMA1EN
+#define UART2_RX_DMA_INSTANCE           DMA1_Channel6
+#if defined(DMAMUX1) /* for L4+ */
+#define UART2_RX_DMA_REQUEST            DMA_REQUEST_USART2_RX
+#else /* for L4 */
+#define UART2_RX_DMA_REQUEST            DMA_REQUEST_2
+#endif /* DMAMUX1 */
+#define UART2_RX_DMA_IRQ                DMA1_Channel6_IRQn
+#endif
+
+/* DMA1 channel7 */
+#if defined(BSP_UART2_TX_USING_DMA) && !defined(UART2_TX_DMA_INSTANCE)
+#define UART2_DMA_TX_IRQHandler         DMA1_Channel7_IRQHandler
+#define UART2_TX_DMA_RCC                RCC_AHB1ENR_DMA1EN
+#define UART2_TX_DMA_INSTANCE           DMA1_Channel7
+#if defined(DMAMUX1) /* for L4+ */
+#define UART2_TX_DMA_REQUEST            DMA_REQUEST_USART2_TX
+#else /* for L4 */
+#define UART2_TX_DMA_REQUEST            DMA_REQUEST_2
+#endif /* DMAMUX1 */
+#define UART2_TX_DMA_IRQ                DMA1_Channel7_IRQn
+#endif
+
+/* DMA2 channel1 */
+#if defined(BSP_UART5_TX_USING_DMA) && !defined(UART5_TX_DMA_INSTANCE)
+#define UART5_DMA_TX_IRQHandler         DMA2_Channel1_IRQHandler
+#define UART5_TX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART5_TX_DMA_INSTANCE           DMA2_Channel1
+#if defined(DMAMUX1) /* for L4+ */
+#define UART5_TX_DMA_REQUEST            DMA_REQUEST_UART5_TX
+#else /* for L4 */
+#define UART5_TX_DMA_REQUEST            DMA_REQUEST_2
+#endif /* DMAMUX1 */
+#define UART5_TX_DMA_IRQ                DMA2_Channel1_IRQn
+#elif defined(BSP_SPI3_RX_USING_DMA) && !defined(SPI3_RX_DMA_INSTANCE)
+#define SPI3_DMA_RX_IRQHandler          DMA2_Channel1_IRQHandler
+#define SPI3_RX_DMA_RCC                 RCC_AHB1ENR_DMA2EN
+#define SPI3_RX_DMA_INSTANCE            DMA2_Channel1
+#if defined(DMAMUX1) /* for L4+ */
+#define SPI3_RX_DMA_REQUEST             DMA_REQUEST_SPI3_RX
+#else /* for L4 */
+#define SPI3_RX_DMA_REQUEST             DMA_REQUEST_2
+#endif /* DMAMUX1 */
+#define SPI3_RX_DMA_IRQ                 DMA2_Channel1_IRQn
+#endif
+
+/* DMA2 channel2 */
+#if defined(BSP_SPI3_TX_USING_DMA) && !defined(SPI3_TX_DMA_INSTANCE)
+#define SPI3_DMA_TX_IRQHandler          DMA2_Channel2_IRQHandler
+#define SPI3_TX_DMA_RCC                 RCC_AHB1ENR_DMA2EN
+#define SPI3_TX_DMA_INSTANCE            DMA2_Channel2
+#if defined(DMAMUX1) /* for L4+ */
+#define SPI3_TX_DMA_REQUEST             DMA_REQUEST_SPI3_TX
+#else /* for L4 */
+#define SPI3_TX_DMA_REQUEST             DMA_REQUEST_3
+#endif /* DMAMUX1 */
+#define SPI3_TX_DMA_IRQ                 DMA2_Channel2_IRQn
+#elif defined(BSP_UART5_RX_USING_DMA) && !defined(UART5_RX_DMA_INSTANCE)
+#define UART5_DMA_RX_IRQHandler         DMA2_Channel2_IRQHandler
+#define UART5_RX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART5_RX_DMA_INSTANCE           DMA2_Channel2
+#if defined(DMAMUX1) /* for L4+ */
+#define UART5_RX_DMA_REQUEST            DMA_REQUEST_UART5_RX
+#else /* for L4 */
+#define UART5_RX_DMA_REQUEST            DMA_REQUEST_2
+#endif /* DMAMUX1 */
+#define UART5_RX_DMA_IRQ                DMA2_Channel2_IRQn
+#endif
+
+/* DMA2 channel3 */
+#if defined(BSP_SPI1_RX_USING_DMA) && !defined(SPI1_RX_DMA_INSTANCE)
+#define SPI1_DMA_RX_IRQHandler          DMA2_Channel3_IRQHandler
+#define SPI1_RX_DMA_RCC                 RCC_AHB1ENR_DMA2EN
+#define SPI1_RX_DMA_INSTANCE            DMA2_Channel3
+#if defined(DMAMUX1) /* for L4+ */
+#define SPI1_RX_DMA_REQUEST             DMA_REQUEST_SPI1_RX
+#else /* for L4 */
+#define SPI1_RX_DMA_REQUEST             DMA_REQUEST_4
+#endif /* DMAMUX1 */
+#define SPI1_RX_DMA_IRQ                 DMA2_Channel3_IRQn
+#endif
+
+/* DMA2 channel4 */
+#if defined(BSP_SPI1_TX_USING_DMA) && !defined(SPI1_TX_DMA_INSTANCE)
+#define SPI1_DMA_TX_IRQHandler          DMA2_Channel4_IRQHandler
+#define SPI1_TX_DMA_RCC                 RCC_AHB1ENR_DMA2EN
+#define SPI1_TX_DMA_INSTANCE            DMA2_Channel4
+#if defined(DMAMUX1) /* for L4+ */
+#define SPI1_TX_DMA_REQUEST             DMA_REQUEST_SPI1_TX
+#else /* for L4 */
+#define SPI1_TX_DMA_REQUEST             DMA_REQUEST_4
+#endif /* DMAMUX1 */
+#define SPI1_TX_DMA_IRQ                 DMA2_Channel4_IRQn
+#endif
+
+/* DMA2 channel5 */
+
+/* DMA2 channel6 */
+#if defined(BSP_UART1_TX_USING_DMA) && !defined(UART1_TX_DMA_INSTANCE)
+#define UART1_DMA_TX_IRQHandler         DMA2_Channel6_IRQHandler
+#define UART1_TX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART1_TX_DMA_INSTANCE           DMA2_Channel6
+#if defined(DMAMUX1) /* for L4+ */
+#define UART1_TX_DMA_REQUEST            DMA_REQUEST_USART1_TX
+#else /* for L4 */
+#define UART1_TX_DMA_REQUEST            DMA_REQUEST_2
+#endif /* DMAMUX1 */
+#define UART1_TX_DMA_IRQ                DMA2_Channel6_IRQn
+#endif
+
+/* DMA2 channel7 */
+#if defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
+#define UART1_DMA_RX_IRQHandler         DMA2_Channel7_IRQHandler
+#define UART1_RX_DMA_RCC                RCC_AHB1ENR_DMA2EN
+#define UART1_RX_DMA_INSTANCE           DMA2_Channel7
+#if defined(DMAMUX1) /* for L4+ */
+#define UART1_RX_DMA_REQUEST            DMA_REQUEST_USART1_RX
+#else /* for L4 */
+#define UART1_RX_DMA_REQUEST            DMA_REQUEST_2
+#endif /* DMAMUX1 */
+#define UART1_RX_DMA_IRQ                DMA2_Channel7_IRQn
+#elif defined(BSP_QSPI_USING_DMA) && !defined(QSPI_DMA_INSTANCE)
+#define QSPI_DMA_IRQHandler             DMA2_Channel7_IRQHandler
+#define QSPI_DMA_RCC                    RCC_AHB1ENR_DMA2EN
+#define QSPI_DMA_INSTANCE               DMA2_Channel7
+#if defined(DMAMUX1) /* for L4+ */
+#define QSPI_DMA_REQUEST                DMA_REQUEST_OCTOSPI1
+#else /* for L4 */
+#define QSPI_DMA_REQUEST                DMA_REQUEST_3
+#endif /* DMAMUX1 */
+#define QSPI_DMA_IRQ                    DMA2_Channel7_IRQn
+#elif defined(BSP_LPUART1_RX_USING_DMA) && !defined(LPUART1_RX_DMA_INSTANCE)
+#define LPUART1_DMA_RX_IRQHandler       DMA2_Channel7_IRQHandler
+#define LPUART1_RX_DMA_RCC              RCC_AHB1ENR_DMA2EN
+#define LPUART1_RX_DMA_INSTANCE         DMA2_Channel7
+#if defined(DMAMUX1) /* for L4+ */
+#define LPUART1_RX_DMA_REQUEST          DMA_REQUEST_LPUART1_RX
+#else /* for L4 */
+#define LPUART1_RX_DMA_REQUEST          DMA_REQUEST_4
+#endif /* DMAMUX1 */
+#define LPUART1_RX_DMA_IRQ              DMA2_Channel7_IRQn
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DMA_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l4/pwm_config.h

@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     zylx         first version
+ * 2023-04-08     Wangyuqiang  complete PWM defination
+ */
+
+#ifndef __PWM_CONFIG_H__
+#define __PWM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_PWM1
+#define PWM1_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM1,         \
+       .name                    = "pwm1",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM1 */
+
+#ifdef BSP_USING_PWM2
+#define PWM2_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM2,         \
+       .name                    = "pwm2",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM2 */
+
+#ifdef BSP_USING_PWM3
+#define PWM3_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM3,         \
+       .name                    = "pwm3",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM3 */
+
+#ifdef BSP_USING_PWM4
+#define PWM4_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM4,         \
+       .name                    = "pwm4",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM4 */
+
+#ifdef BSP_USING_PWM5
+#define PWM5_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM5,         \
+       .name                    = "pwm5",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM5 */
+
+#ifdef BSP_USING_PWM6
+#define PWM6_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM6,         \
+       .name                    = "pwm6",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM6 */
+
+#ifdef BSP_USING_PWM7
+#define PWM7_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM7,         \
+       .name                    = "pwm7",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM7 */
+
+#ifdef BSP_USING_PWM8
+#define PWM8_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM8,         \
+       .name                    = "pwm8",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM8 */
+
+#ifdef BSP_USING_PWM9
+#define PWM9_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM9,         \
+       .name                    = "pwm9",       \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM9 */
+
+#ifdef BSP_USING_PWM10
+#define PWM10_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM10,        \
+       .name                    = "pwm10",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM10 */
+
+#ifdef BSP_USING_PWM11
+#define PWM11_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM11,        \
+       .name                    = "pwm11",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM11 */
+
+#ifdef BSP_USING_PWM12
+#define PWM12_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM12,        \
+       .name                    = "pwm12",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM12 */
+
+#ifdef BSP_USING_PWM13
+#define PWM13_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM13,        \
+       .name                    = "pwm13",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM13 */
+
+#ifdef BSP_USING_PWM14
+#define PWM14_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM14,        \
+       .name                    = "pwm14",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM14 */
+
+#ifdef BSP_USING_PWM15
+#define PWM15_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM15,        \
+       .name                    = "pwm15",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM15 */
+
+#ifdef BSP_USING_PWM16
+#define PWM16_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM16,        \
+       .name                    = "pwm16",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM16 */
+
+#ifdef BSP_USING_PWM17
+#define PWM17_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM17,        \
+       .name                    = "pwm17",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM17 */
+
+#ifdef BSP_USING_PWM18
+#define PWM18_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM18,        \
+       .name                    = "pwm18",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM18 */
+
+#ifdef BSP_USING_PWM19
+#define PWM19_CONFIG                            \
+    {                                           \
+       .tim_handle.Instance     = TIM19,        \
+       .name                    = "pwm19",      \
+       .channel                 = RT_NULL       \
+    }
+#endif /* BSP_USING_PWM19 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PWM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l4/qspi_config.h

@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-22     zylx         first version
+ */
+
+#ifndef __QSPI_CONFIG_H__
+#define __QSPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_QSPI
+#ifndef QSPI_BUS_CONFIG
+#define QSPI_BUS_CONFIG                                        \
+    {                                                          \
+        .Instance = QUADSPI,                                   \
+        .Init.FifoThreshold = 4,                               \
+        .Init.SampleShifting = QSPI_SAMPLE_SHIFTING_HALFCYCLE, \
+        .Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_4_CYCLE,  \
+    }
+#endif /* QSPI_BUS_CONFIG */
+#endif /* BSP_USING_QSPI */
+
+#ifdef BSP_QSPI_USING_DMA
+#ifndef QSPI_DMA_CONFIG
+#define QSPI_DMA_CONFIG                                        \
+    {                                                          \
+        .Instance = QSPI_DMA_INSTANCE,                         \
+        .Init.Request = QSPI_DMA_REQUEST,                      \
+        .Init.Direction = DMA_PERIPH_TO_MEMORY,                \
+        .Init.PeriphInc = DMA_PINC_DISABLE,                    \
+        .Init.MemInc = DMA_MINC_ENABLE,                        \
+        .Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE,       \
+        .Init.MemDataAlignment = DMA_MDATAALIGN_BYTE,          \
+        .Init.Mode = DMA_NORMAL,                               \
+        .Init.Priority = DMA_PRIORITY_LOW                      \
+    }
+#endif /* QSPI_DMA_CONFIG */
+#endif /* BSP_QSPI_USING_DMA */
+
+#define QSPI_IRQn                   QUADSPI_IRQn
+#define QSPI_IRQHandler             QUADSPI_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __QSPI_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l4/sdio_config.h

@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-13     BalanceTWK   first version
+ */
+
+#ifndef __SDIO_CONFIG_H__
+#define __SDIO_CONFIG_H__
+
+#include <rtthread.h>
+#include "stm32l4xx_hal.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SDIO
+#define SDIO_BUS_CONFIG                                  \
+    {                                                    \
+        .Instance = SDMMC1,                              \
+        .dma_rx.dma_rcc = RCC_AHB1ENR_DMA2EN,            \
+        .dma_tx.dma_rcc = RCC_AHB1ENR_DMA2EN,            \
+        .dma_rx.Instance = DMA2_Channel4,                \
+        .dma_rx.request = DMA_REQUEST_7,                 \
+        .dma_rx.dma_irq = DMA2_Channel4_IRQn,            \
+        .dma_tx.Instance = DMA2_Channel5,                \
+        .dma_tx.request = DMA_REQUEST_7,                 \
+        .dma_tx.dma_irq = DMA2_Channel5_IRQn,            \
+    }
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SDIO_CONFIG_H__ */
+
+
+

libraries/HAL_Drivers/drivers/config/l4/spi_config.h

@@ -0,0 +1,129 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ */
+
+#ifndef __SPI_CONFIG_H__
+#define __SPI_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_SPI1
+#ifndef SPI1_BUS_CONFIG
+#define SPI1_BUS_CONFIG                                     \
+    {                                                       \
+        .Instance = SPI1,                                   \
+        .bus_name = "spi1",                                 \
+        .irq_type = SPI1_IRQn,                      \
+    }
+#endif /* SPI1_BUS_CONFIG */
+#endif /* BSP_USING_SPI1 */
+
+#ifdef BSP_SPI1_TX_USING_DMA
+#ifndef SPI1_TX_DMA_CONFIG
+#define SPI1_TX_DMA_CONFIG                                  \
+    {                                                       \
+        .dma_rcc = SPI1_TX_DMA_RCC,                         \
+        .Instance = SPI1_TX_DMA_INSTANCE,                   \
+        .request = SPI1_TX_DMA_REQUEST,                     \
+        .dma_irq = SPI1_TX_DMA_IRQ,                         \
+    }
+#endif /* SPI1_TX_DMA_CONFIG */
+#endif /* BSP_SPI1_TX_USING_DMA */
+
+#ifdef BSP_SPI1_RX_USING_DMA
+#ifndef SPI1_RX_DMA_CONFIG
+#define SPI1_RX_DMA_CONFIG                                  \
+    {                                                       \
+        .dma_rcc = SPI1_RX_DMA_RCC,                         \
+        .Instance = SPI1_RX_DMA_INSTANCE,                   \
+        .request = SPI1_RX_DMA_REQUEST,                     \
+        .dma_irq = SPI1_RX_DMA_IRQ,                         \
+    }
+#endif /* SPI1_RX_DMA_CONFIG */
+#endif /* BSP_SPI1_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI2
+#ifndef SPI2_BUS_CONFIG
+#define SPI2_BUS_CONFIG                                     \
+    {                                                       \
+        .Instance = SPI2,                                   \
+        .bus_name = "spi2",                                 \
+        .irq_type = SPI2_IRQn,                      \
+    }
+#endif /* SPI2_BUS_CONFIG */
+#endif /* BSP_USING_SPI2 */
+
+#ifdef BSP_SPI2_TX_USING_DMA
+#ifndef SPI2_TX_DMA_CONFIG
+#define SPI2_TX_DMA_CONFIG                                  \
+    {                                                       \
+        .dma_rcc = SPI2_TX_DMA_RCC,                         \
+        .Instance = SPI2_TX_DMA_INSTANCE,                   \
+        .request = SPI2_TX_DMA_REQUEST,                     \
+        .dma_irq = SPI2_TX_DMA_IRQ,                         \
+    }
+#endif /* SPI2_TX_DMA_CONFIG */
+#endif /* BSP_SPI2_TX_USING_DMA */
+
+#ifdef BSP_SPI2_RX_USING_DMA
+#ifndef SPI2_RX_DMA_CONFIG
+#define SPI2_RX_DMA_CONFIG                                  \
+    {                                                       \
+        .dma_rcc = SPI2_RX_DMA_RCC,                         \
+        .Instance = SPI2_RX_DMA_INSTANCE,                   \
+        .request = SPI2_RX_DMA_REQUEST,                     \
+        .dma_irq = SPI2_RX_DMA_IRQ,                         \
+    }
+#endif /* SPI2_RX_DMA_CONFIG */
+#endif /* BSP_SPI2_RX_USING_DMA */
+
+#ifdef BSP_USING_SPI3
+#ifndef SPI3_BUS_CONFIG
+#define SPI3_BUS_CONFIG                                     \
+    {                                                       \
+        .Instance = SPI3,                                   \
+        .bus_name = "spi3",                                 \
+        .irq_type = SPI3_IRQn,                      \
+    }
+#endif /* SPI3_BUS_CONFIG */
+#endif /* BSP_USING_SPI3 */
+
+#ifdef BSP_SPI3_TX_USING_DMA
+#ifndef SPI3_TX_DMA_CONFIG
+#define SPI3_TX_DMA_CONFIG                                  \
+    {                                                       \
+        .dma_rcc = SPI3_TX_DMA_RCC,                         \
+        .Instance = SPI3_TX_DMA_INSTANCE,                   \
+        .request = SPI3_TX_DMA_REQUEST,                     \
+        .dma_irq = SPI3_TX_DMA_IRQ,                         \
+    }
+#endif /* SPI3_TX_DMA_CONFIG */
+#endif /* BSP_SPI3_TX_USING_DMA */
+
+#ifdef BSP_SPI3_RX_USING_DMA
+#ifndef SPI3_RX_DMA_CONFIG
+#define SPI3_RX_DMA_CONFIG                                  \
+    {                                                       \
+        .dma_rcc = SPI3_RX_DMA_RCC,                         \
+        .Instance = SPI3_RX_DMA_INSTANCE,                   \
+        .request = SPI3_RX_DMA_REQUEST,                     \
+        .dma_irq = SPI3_RX_DMA_IRQ,                         \
+    }
+#endif /* SPI3_RX_DMA_CONFIG */
+#endif /* BSP_SPI3_RX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SPI_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l4/tim_config.h

@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-12     zylx         first version
+ */
+
+#ifndef __TIM_CONFIG_H__
+#define __TIM_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef TIM_DEV_INFO_CONFIG
+#define TIM_DEV_INFO_CONFIG                     \
+    {                                           \
+        .maxfreq = 1000000,                     \
+        .minfreq = 2000,                        \
+        .maxcnt  = 0xFFFF,                      \
+        .cntmode = HWTIMER_CNTMODE_UP,          \
+    }
+#endif /* TIM_DEV_INFO_CONFIG */
+
+#ifdef BSP_USING_TIM7
+#ifndef TIM7_CONFIG
+#define TIM7_CONFIG                                        \
+    {                                                      \
+       .tim_handle.Instance     = TIM7,                    \
+       .tim_irqn                = TIM7_IRQn,               \
+       .name                    = "timer7",                \
+    }
+#endif /* TIM7_CONFIG */
+#endif /* BSP_USING_TIM7 */
+
+#ifdef BSP_USING_TIM15
+#ifndef TIM15_CONFIG
+#define TIM15_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM15,                    \
+       .tim_irqn                = TIM1_BRK_TIM15_IRQn,      \
+       .name                    = "timer15",                \
+    }
+#endif /* TIM15_CONFIG */
+#endif /* BSP_USING_TIM15 */
+
+#ifdef BSP_USING_TIM16
+#ifndef TIM16_CONFIG
+#define TIM16_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM16,                    \
+       .tim_irqn                = TIM1_UP_TIM16_IRQn,       \
+       .name                    = "timer16",                \
+    }
+#endif /* TIM16_CONFIG */
+#endif /* BSP_USING_TIM16 */
+
+#ifdef BSP_USING_TIM17
+#ifndef TIM17_CONFIG
+#define TIM17_CONFIG                                        \
+    {                                                       \
+       .tim_handle.Instance     = TIM17,                    \
+       .tim_irqn                = TIM1_TRG_COM_TIM17_IRQn,  \
+       .name                    = "timer17",                \
+    }
+#endif /* TIM17_CONFIG */
+#endif /* BSP_USING_TIM17 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l4/uart_config.h

@@ -0,0 +1,151 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ */
+
+#ifndef __UART_CONFIG_H__
+#define __UART_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_USING_LPUART1)
+#ifndef LPUART1_CONFIG
+#define LPUART1_CONFIG                                              \
+    {                                                               \
+        .name = "lpuart1",                                          \
+        .Instance = LPUART1,                                        \
+        .irq_type = LPUART1_IRQn,                                   \
+    }
+#endif /* LPUART1_CONFIG */
+#if defined(BSP_LPUART1_RX_USING_DMA)
+#ifndef LPUART1_DMA_CONFIG
+#define LPUART1_DMA_CONFIG                                          \
+    {                                                               \
+        .Instance = LPUART1_RX_DMA_INSTANCE,                        \
+        .request  = LPUART1_RX_DMA_REQUEST,                         \
+        .dma_rcc  = LPUART1_RX_DMA_RCC,                             \
+        .dma_irq  = LPUART1_RX_DMA_IRQ,                             \
+    }
+#endif /* LPUART1_DMA_CONFIG */
+#endif /* BSP_LPUART1_RX_USING_DMA */
+#endif /* BSP_USING_LPUART1 */
+
+#if defined(BSP_USING_UART1)
+#ifndef UART1_CONFIG
+#define UART1_CONFIG                                                \
+    {                                                               \
+        .name = "uart1",                                            \
+        .Instance = USART1,                                         \
+        .irq_type = USART1_IRQn,                                    \
+    }
+#endif /* UART1_CONFIG */
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_UART1_RX_USING_DMA)
+#ifndef UART1_DMA_RX_CONFIG
+#define UART1_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART1_RX_DMA_INSTANCE,                          \
+        .request  = UART1_RX_DMA_REQUEST,                           \
+        .dma_rcc  = UART1_RX_DMA_RCC,                               \
+        .dma_irq  = UART1_RX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_RX_CONFIG */
+#endif /* BSP_UART1_RX_USING_DMA */
+
+#if defined(BSP_UART1_TX_USING_DMA)
+#ifndef UART1_DMA_TX_CONFIG
+#define UART1_DMA_TX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART1_TX_DMA_INSTANCE,                          \
+        .request  = UART1_TX_DMA_REQUEST,                           \
+        .dma_rcc  = UART1_TX_DMA_RCC,                               \
+        .dma_irq  = UART1_TX_DMA_IRQ,                               \
+    }
+#endif /* UART1_DMA_TX_CONFIG */
+#endif /* BSP_UART1_TX_USING_DMA */
+
+#if defined(BSP_USING_UART2)
+#ifndef UART2_CONFIG
+#define UART2_CONFIG                                                \
+    {                                                               \
+        .name = "uart2",                                            \
+        .Instance = USART2,                                         \
+        .irq_type = USART2_IRQn,                                    \
+    }
+#endif /* UART2_CONFIG */
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_UART2_RX_USING_DMA)
+#ifndef UART2_DMA_RX_CONFIG
+#define UART2_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART2_RX_DMA_INSTANCE,                          \
+        .request  = UART2_RX_DMA_REQUEST,                           \
+        .dma_rcc  = UART2_RX_DMA_RCC,                               \
+        .dma_irq  = UART2_RX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_RX_CONFIG */
+#endif /* BSP_UART2_RX_USING_DMA */
+
+#if defined(BSP_UART2_TX_USING_DMA)
+#ifndef UART2_DMA_TX_CONFIG
+#define UART2_DMA_TX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART2_TX_DMA_INSTANCE,                          \
+        .request  = UART2_TX_DMA_REQUEST,                           \
+        .dma_rcc  = UART2_TX_DMA_RCC,                               \
+        .dma_irq  = UART2_TX_DMA_IRQ,                               \
+    }
+#endif /* UART2_DMA_TX_CONFIG */
+#endif /* BSP_UART2_TX_USING_DMA */
+
+#if defined(BSP_USING_UART3)
+#ifndef UART3_CONFIG
+#define UART3_CONFIG                                                \
+    {                                                               \
+        .name = "uart3",                                            \
+        .Instance = USART3,                                         \
+        .irq_type = USART3_IRQn,                                    \
+    }
+#endif /* UART3_CONFIG */
+#endif /* BSP_USING_UART3 */
+
+#if defined(BSP_UART3_RX_USING_DMA)
+#ifndef UART3_DMA_RX_CONFIG
+#define UART3_DMA_RX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART3_RX_DMA_INSTANCE,                          \
+        .request  = UART3_RX_DMA_REQUEST,                           \
+        .dma_rcc  = UART3_RX_DMA_RCC,                               \
+        .dma_irq  = UART3_RX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_RX_CONFIG */
+#endif /* BSP_UART3_RX_USING_DMA */
+
+#if defined(BSP_UART3_TX_USING_DMA)
+#ifndef UART3_DMA_TX_CONFIG
+#define UART3_DMA_TX_CONFIG                                            \
+    {                                                               \
+        .Instance = UART3_TX_DMA_INSTANCE,                          \
+        .request  = UART3_TX_DMA_REQUEST,                           \
+        .dma_rcc  = UART3_TX_DMA_RCC,                               \
+        .dma_irq  = UART3_TX_DMA_IRQ,                               \
+    }
+#endif /* UART3_DMA_TX_CONFIG */
+#endif /* BSP_UART3_TX_USING_DMA */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

libraries/HAL_Drivers/drivers/config/l4/usbd_config.h

@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-04-10     ZYH          first version
+ * 2019-10-27     flybreak     Compatible with the HS
+ */
+#ifndef __USBD_CONFIG_H__
+#define __USBD_CONFIG_H__
+
+#include <rtconfig.h>
+
+#ifdef BSP_USBD_TYPE_HS
+#define USBD_IRQ_TYPE     OTG_HS_IRQn
+#define USBD_IRQ_HANDLER  OTG_HS_IRQHandler
+#define USBD_INSTANCE     USB_OTG_HS
+#else
+#define USBD_IRQ_TYPE     OTG_FS_IRQn
+#define USBD_IRQ_HANDLER  OTG_FS_IRQHandler
+#define USBD_INSTANCE     USB_OTG_FS
+#endif
+
+#ifdef BSP_USBD_SPEED_HS
+#define USBD_PCD_SPEED    PCD_SPEED_HIGH
+#elif  BSP_USBD_SPEED_HSINFS
+#define USBD_PCD_SPEED    PCD_SPEED_HIGH_IN_FULL
+#else
+#define USBD_PCD_SPEED    PCD_SPEED_FULL
+#endif
+
+#ifdef BSP_USBD_PHY_ULPI
+#define USBD_PCD_PHY_MODULE    PCD_PHY_ULPI
+#elif  BSP_USBD_PHY_UTMI
+#define USBD_PCD_PHY_MODULE    PCD_PHY_UTMI
+#else
+#define USBD_PCD_PHY_MODULE    PCD_PHY_EMBEDDED
+#endif
+
+#endif

libraries/HAL_Drivers/drivers/config/l5/adc_config.h

@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-07     zylx         first version
+ */
+
+#ifndef __ADC_CONFIG_H__
+#define __ADC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_ADC1
+#ifndef ADC1_CONFIG
+#define ADC1_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC1,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = ADC_SCAN_DISABLE,              \
+       .Init.EOCSelection          = ADC_EOC_SINGLE_CONV,           \
+       .Init.LowPowerAutoWait      = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 1,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+       .Init.Overrun               = ADC_OVR_DATA_OVERWRITTEN,      \
+    }
+#endif /* ADC1_CONFIG */
+#endif /* BSP_USING_ADC1 */
+
+#ifdef BSP_USING_ADC2
+#ifndef ADC2_CONFIG
+#define ADC2_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC2,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = ADC_SCAN_DISABLE,              \
+       .Init.EOCSelection          = ADC_EOC_SINGLE_CONV,           \
+       .Init.LowPowerAutoWait      = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 1,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+       .Init.Overrun               = ADC_OVR_DATA_OVERWRITTEN,      \
+    }
+#endif /* ADC2_CONFIG */
+#endif /* BSP_USING_ADC2 */
+
+#ifdef BSP_USING_ADC3
+#ifndef ADC3_CONFIG
+#define ADC3_CONFIG                                                 \
+    {                                                               \
+       .Instance                   = ADC3,                          \
+       .Init.ClockPrescaler        = ADC_CLOCK_SYNC_PCLK_DIV4,      \
+       .Init.Resolution            = ADC_RESOLUTION_12B,            \
+       .Init.DataAlign             = ADC_DATAALIGN_RIGHT,           \
+       .Init.ScanConvMode          = ADC_SCAN_DISABLE,              \
+       .Init.EOCSelection          = ADC_EOC_SINGLE_CONV,           \
+       .Init.LowPowerAutoWait      = DISABLE,                       \
+       .Init.ContinuousConvMode    = DISABLE,                       \
+       .Init.NbrOfConversion       = 1,                             \
+       .Init.DiscontinuousConvMode = DISABLE,                       \
+       .Init.NbrOfDiscConversion   = 1,                             \
+       .Init.ExternalTrigConv      = ADC_SOFTWARE_START,            \
+       .Init.DMAContinuousRequests = DISABLE,                       \
+       .Init.Overrun               = ADC_OVR_DATA_OVERWRITTEN,      \
+    }
+#endif /* ADC3_CONFIG */
+#endif /* BSP_USING_ADC3 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __ADC_CONFIG_H__ */

libraries/HAL_Drivers/drivers/config/l5/dac_config.h

@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-06-16     thread-liu   first version
+ */
+
+#ifndef __DAC_CONFIG_H__
+#define __DAC_CONFIG_H__
+
+#include <rtthread.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef BSP_USING_DAC1
+#ifndef DAC1_CONFIG
+#define DAC1_CONFIG                                                    \
+    {                                                                  \
+       .Instance                      = DAC1,                          \
+    }
+#endif /* DAC2_CONFIG */
+#endif /* BSP_USING_DAC2 */
+
+#ifdef BSP_USING_DAC2
+#ifndef DAC2_CONFIG
+#define DAC2_CONFIG                                                    \
+    {                                                                  \
+       .Instance                      = DAC2,                          \
+    }
+#endif /* DAC2_CONFIG */
+#endif /* BSP_USING_DAC2 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __DAC_CONFIG_H__ */