first
This commit is contained in:
17
board/CubeMX_Config/.mxproject
Normal file
17
board/CubeMX_Config/.mxproject
Normal file
File diff suppressed because one or more lines are too long
365
board/CubeMX_Config/CubeMX_Config.ioc
Normal file
365
board/CubeMX_Config/CubeMX_Config.ioc
Normal file
@@ -0,0 +1,365 @@
|
||||
#MicroXplorer Configuration settings - do not modify
|
||||
ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_1
|
||||
ADC1.IPParameters=Rank-0\#ChannelRegularConversion,master,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag
|
||||
ADC1.NbrOfConversionFlag=1
|
||||
ADC1.Rank-0\#ChannelRegularConversion=1
|
||||
ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES
|
||||
ADC1.master=1
|
||||
ADC3.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_14
|
||||
ADC3.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag
|
||||
ADC3.NbrOfConversionFlag=1
|
||||
ADC3.Rank-0\#ChannelRegularConversion=1
|
||||
ADC3.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES
|
||||
CAD.formats=
|
||||
CAD.pinconfig=
|
||||
CAD.provider=
|
||||
FSMC.IPParameters=WriteOperation1
|
||||
FSMC.WriteOperation1=FSMC_WRITE_OPERATION_ENABLE
|
||||
File.Version=6
|
||||
GPIO.groupedBy=Group By Peripherals
|
||||
KeepUserPlacement=false
|
||||
Mcu.CPN=STM32F407ZGT6
|
||||
Mcu.Family=STM32F4
|
||||
Mcu.IP0=ADC1
|
||||
Mcu.IP1=ADC3
|
||||
Mcu.IP10=SYS
|
||||
Mcu.IP11=TIM1
|
||||
Mcu.IP12=TIM2
|
||||
Mcu.IP13=TIM3
|
||||
Mcu.IP14=TIM4
|
||||
Mcu.IP15=TIM11
|
||||
Mcu.IP16=TIM13
|
||||
Mcu.IP17=TIM14
|
||||
Mcu.IP18=USART1
|
||||
Mcu.IP19=USART2
|
||||
Mcu.IP2=DAC
|
||||
Mcu.IP20=USB_OTG_FS
|
||||
Mcu.IP3=FSMC
|
||||
Mcu.IP4=IWDG
|
||||
Mcu.IP5=NVIC
|
||||
Mcu.IP6=RCC
|
||||
Mcu.IP7=RTC
|
||||
Mcu.IP8=SDIO
|
||||
Mcu.IP9=SPI2
|
||||
Mcu.IPNb=21
|
||||
Mcu.Name=STM32F407Z(E-G)Tx
|
||||
Mcu.Package=LQFP144
|
||||
Mcu.Pin0=PC14-OSC32_IN
|
||||
Mcu.Pin1=PC15-OSC32_OUT
|
||||
Mcu.Pin10=PC3
|
||||
Mcu.Pin11=PA1
|
||||
Mcu.Pin12=PA2
|
||||
Mcu.Pin13=PA3
|
||||
Mcu.Pin14=PA4
|
||||
Mcu.Pin15=PA7
|
||||
Mcu.Pin16=PB1
|
||||
Mcu.Pin17=PE7
|
||||
Mcu.Pin18=PE8
|
||||
Mcu.Pin19=PE9
|
||||
Mcu.Pin2=PF4
|
||||
Mcu.Pin20=PE10
|
||||
Mcu.Pin21=PE11
|
||||
Mcu.Pin22=PE13
|
||||
Mcu.Pin23=PB10
|
||||
Mcu.Pin24=PB11
|
||||
Mcu.Pin25=PB13
|
||||
Mcu.Pin26=PD12
|
||||
Mcu.Pin27=PD13
|
||||
Mcu.Pin28=PD14
|
||||
Mcu.Pin29=PD15
|
||||
Mcu.Pin3=PF5
|
||||
Mcu.Pin30=PC8
|
||||
Mcu.Pin31=PC9
|
||||
Mcu.Pin32=PA9
|
||||
Mcu.Pin33=PA10
|
||||
Mcu.Pin34=PA11
|
||||
Mcu.Pin35=PA12
|
||||
Mcu.Pin36=PA13
|
||||
Mcu.Pin37=PA14
|
||||
Mcu.Pin38=PC10
|
||||
Mcu.Pin39=PC11
|
||||
Mcu.Pin4=PF6
|
||||
Mcu.Pin40=PC12
|
||||
Mcu.Pin41=PD0
|
||||
Mcu.Pin42=PD1
|
||||
Mcu.Pin43=PD2
|
||||
Mcu.Pin44=PD4
|
||||
Mcu.Pin45=PD5
|
||||
Mcu.Pin46=PG10
|
||||
Mcu.Pin47=PG11
|
||||
Mcu.Pin48=PG13
|
||||
Mcu.Pin49=PG14
|
||||
Mcu.Pin5=PF7
|
||||
Mcu.Pin50=VP_IWDG_VS_IWDG
|
||||
Mcu.Pin51=VP_RTC_VS_RTC_Activate
|
||||
Mcu.Pin52=VP_SYS_VS_Systick
|
||||
Mcu.Pin53=VP_TIM1_VS_ClockSourceINT
|
||||
Mcu.Pin54=VP_TIM2_VS_ClockSourceINT
|
||||
Mcu.Pin55=VP_TIM3_VS_ClockSourceINT
|
||||
Mcu.Pin56=VP_TIM11_VS_ClockSourceINT
|
||||
Mcu.Pin57=VP_TIM13_VS_ClockSourceINT
|
||||
Mcu.Pin58=VP_TIM14_VS_ClockSourceINT
|
||||
Mcu.Pin6=PF9
|
||||
Mcu.Pin7=PH0-OSC_IN
|
||||
Mcu.Pin8=PH1-OSC_OUT
|
||||
Mcu.Pin9=PC2
|
||||
Mcu.PinsNb=59
|
||||
Mcu.ThirdPartyNb=0
|
||||
Mcu.UserConstants=
|
||||
Mcu.UserName=STM32F407ZGTx
|
||||
MxCube.Version=6.11.0
|
||||
MxDb.Version=DB.6.0.110
|
||||
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.ForceEnableDMAVector=true
|
||||
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.OTG_FS_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
|
||||
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
|
||||
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false
|
||||
NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true
|
||||
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||
PA1.Signal=ADCx_IN1
|
||||
PA10.GPIOParameters=GPIO_PuPd
|
||||
PA10.GPIO_PuPd=GPIO_PULLUP
|
||||
PA10.Mode=Asynchronous
|
||||
PA10.Signal=USART1_RX
|
||||
PA11.Mode=Device_Only
|
||||
PA11.Signal=USB_OTG_FS_DM
|
||||
PA12.Mode=Device_Only
|
||||
PA12.Signal=USB_OTG_FS_DP
|
||||
PA13.Mode=Serial_Wire
|
||||
PA13.Signal=SYS_JTMS-SWDIO
|
||||
PA14.Mode=Serial_Wire
|
||||
PA14.Signal=SYS_JTCK-SWCLK
|
||||
PA2.Locked=true
|
||||
PA2.Mode=Asynchronous
|
||||
PA2.Signal=USART2_TX
|
||||
PA3.Locked=true
|
||||
PA3.Mode=Asynchronous
|
||||
PA3.Signal=USART2_RX
|
||||
PA4.Signal=COMP_DAC1_group
|
||||
PA7.Signal=S_TIM3_CH2
|
||||
PA9.GPIOParameters=GPIO_PuPd
|
||||
PA9.GPIO_PuPd=GPIO_PULLUP
|
||||
PA9.Mode=Asynchronous
|
||||
PA9.Signal=USART1_TX
|
||||
PB1.Signal=S_TIM3_CH4
|
||||
PB10.Signal=S_TIM2_CH3
|
||||
PB11.Signal=S_TIM2_CH4
|
||||
PB13.Mode=Full_Duplex_Master
|
||||
PB13.Signal=SPI2_SCK
|
||||
PC10.Mode=SD_4_bits_Wide_bus
|
||||
PC10.Signal=SDIO_D2
|
||||
PC11.Mode=SD_4_bits_Wide_bus
|
||||
PC11.Signal=SDIO_D3
|
||||
PC12.Mode=SD_4_bits_Wide_bus
|
||||
PC12.Signal=SDIO_CK
|
||||
PC14-OSC32_IN.Mode=LSE-External-Oscillator
|
||||
PC14-OSC32_IN.Signal=RCC_OSC32_IN
|
||||
PC15-OSC32_OUT.Mode=LSE-External-Oscillator
|
||||
PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
|
||||
PC2.Mode=Full_Duplex_Master
|
||||
PC2.Signal=SPI2_MISO
|
||||
PC3.Mode=Full_Duplex_Master
|
||||
PC3.Signal=SPI2_MOSI
|
||||
PC8.Mode=SD_4_bits_Wide_bus
|
||||
PC8.Signal=SDIO_D0
|
||||
PC9.Mode=SD_4_bits_Wide_bus
|
||||
PC9.Signal=SDIO_D1
|
||||
PD0.Signal=FSMC_D2_DA2
|
||||
PD1.Signal=FSMC_D3_DA3
|
||||
PD12.Signal=S_TIM4_CH1
|
||||
PD13.Signal=FSMC_A18
|
||||
PD14.Signal=FSMC_D0_DA0
|
||||
PD15.Signal=FSMC_D1_DA1
|
||||
PD2.Mode=SD_4_bits_Wide_bus
|
||||
PD2.Signal=SDIO_CMD
|
||||
PD4.Signal=FSMC_NOE
|
||||
PD5.Signal=FSMC_NWE
|
||||
PE10.Signal=FSMC_D7_DA7
|
||||
PE11.Locked=true
|
||||
PE11.Signal=S_TIM1_CH2
|
||||
PE13.Signal=S_TIM1_CH3
|
||||
PE7.Signal=FSMC_D4_DA4
|
||||
PE8.Signal=FSMC_D5_DA5
|
||||
PE9.Signal=FSMC_D6_DA6
|
||||
PF4.Locked=true
|
||||
PF4.Mode=IN14
|
||||
PF4.Signal=ADC3_IN14
|
||||
PF5.Locked=true
|
||||
PF5.Mode=IN15
|
||||
PF5.Signal=ADC3_IN15
|
||||
PF6.Locked=true
|
||||
PF6.Mode=IN4
|
||||
PF6.Signal=ADC3_IN4
|
||||
PF7.Locked=true
|
||||
PF7.Mode=IN5
|
||||
PF7.Signal=ADC3_IN5
|
||||
PF9.Signal=S_TIM14_CH1
|
||||
PG10.Mode=NorPsramChipSelect3_1
|
||||
PG10.Signal=FSMC_NE3
|
||||
PG11.Locked=true
|
||||
PG11.Signal=ETH_TX_EN
|
||||
PG13.Locked=true
|
||||
PG13.Signal=ETH_TXD0
|
||||
PG14.Locked=true
|
||||
PG14.Signal=ETH_TXD1
|
||||
PH0-OSC_IN.Mode=HSE-External-Oscillator
|
||||
PH0-OSC_IN.Signal=RCC_OSC_IN
|
||||
PH1-OSC_OUT.Mode=HSE-External-Oscillator
|
||||
PH1-OSC_OUT.Signal=RCC_OSC_OUT
|
||||
PinOutPanel.RotationAngle=0
|
||||
ProjectManager.AskForMigrate=true
|
||||
ProjectManager.BackupPrevious=false
|
||||
ProjectManager.CompilerOptimize=6
|
||||
ProjectManager.ComputerToolchain=false
|
||||
ProjectManager.CoupleFile=false
|
||||
ProjectManager.CustomerFirmwarePackage=
|
||||
ProjectManager.DefaultFWLocation=true
|
||||
ProjectManager.DeletePrevious=true
|
||||
ProjectManager.DeviceId=STM32F407ZGTx
|
||||
ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.27.1
|
||||
ProjectManager.FreePins=false
|
||||
ProjectManager.HalAssertFull=false
|
||||
ProjectManager.HeapSize=0x200
|
||||
ProjectManager.KeepUserCode=true
|
||||
ProjectManager.LastFirmware=true
|
||||
ProjectManager.LibraryCopy=0
|
||||
ProjectManager.MainLocation=Src
|
||||
ProjectManager.NoMain=false
|
||||
ProjectManager.PreviousToolchain=
|
||||
ProjectManager.ProjectBuild=false
|
||||
ProjectManager.ProjectFileName=CubeMX_Config.ioc
|
||||
ProjectManager.ProjectName=CubeMX_Config
|
||||
ProjectManager.ProjectStructure=
|
||||
ProjectManager.RegisterCallBack=
|
||||
ProjectManager.StackSize=0x400
|
||||
ProjectManager.TargetToolchain=MDK-ARM V5
|
||||
ProjectManager.ToolChainLocation=
|
||||
ProjectManager.UAScriptAfterPath=
|
||||
ProjectManager.UAScriptBeforePath=
|
||||
ProjectManager.UnderRoot=false
|
||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_SPI1_Init-SPI1-false-HAL-true,5-MX_RTC_Init-RTC-false-HAL-true,6-MX_IWDG_Init-IWDG-false-HAL-true,7-MX_TIM14_Init-TIM14-false-HAL-true,8-MX_TIM13_Init-TIM13-false-HAL-true,9-MX_TIM11_Init-TIM11-false-HAL-true,10-MX_SDIO_SD_Init-SDIO-false-HAL-true,11-MX_TIM2_Init-TIM2-false-HAL-true,12-MX_SPI2_Init-SPI2-false-HAL-true,13-MX_TIM4_Init-TIM4-false-HAL-true,14-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true,15-MX_FSMC_Init-FSMC-false-HAL-true,16-MX_DAC_Init-DAC-false-HAL-true,17-MX_TIM3_Init-TIM3-false-HAL-true,18-MX_ADC1_Init-ADC1-false-HAL-true,19-MX_ADC3_Init-ADC3-false-HAL-true,20-MX_TIM1_Init-TIM1-false-HAL-true,21-MX_USART2_UART_Init-USART2-false-HAL-true
|
||||
RCC.48MHZClocksFreq_Value=48000000
|
||||
RCC.AHBFreq_Value=168000000
|
||||
RCC.APB1CLKDivider=RCC_HCLK_DIV4
|
||||
RCC.APB1Freq_Value=42000000
|
||||
RCC.APB1TimFreq_Value=84000000
|
||||
RCC.APB2CLKDivider=RCC_HCLK_DIV2
|
||||
RCC.APB2Freq_Value=84000000
|
||||
RCC.APB2TimFreq_Value=168000000
|
||||
RCC.CortexFreq_Value=168000000
|
||||
RCC.EthernetFreq_Value=168000000
|
||||
RCC.FCLKCortexFreq_Value=168000000
|
||||
RCC.FamilyName=M
|
||||
RCC.HCLKFreq_Value=168000000
|
||||
RCC.HSE_VALUE=8000000
|
||||
RCC.HSI_VALUE=16000000
|
||||
RCC.I2SClocksFreq_Value=192000000
|
||||
RCC.IPParameters=48MHZClocksFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2CLKDivider,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2SClocksFreq_Value,LSI_VALUE,MCO2PinFreq_Value,PLLCLKFreq_Value,PLLM,PLLN,PLLQ,PLLQCLKFreq_Value,RCC_RTC_Clock_Source,RCC_RTC_Clock_SourceVirtual,RTCFreq_Value,RTCHSEDivFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VcooutputI2S
|
||||
RCC.LSI_VALUE=32000
|
||||
RCC.MCO2PinFreq_Value=168000000
|
||||
RCC.PLLCLKFreq_Value=168000000
|
||||
RCC.PLLM=4
|
||||
RCC.PLLN=168
|
||||
RCC.PLLQ=7
|
||||
RCC.PLLQCLKFreq_Value=48000000
|
||||
RCC.RCC_RTC_Clock_Source=RCC_RTCCLKSOURCE_LSE
|
||||
RCC.RCC_RTC_Clock_SourceVirtual=RCC_RTCCLKSOURCE_LSE
|
||||
RCC.RTCFreq_Value=32768
|
||||
RCC.RTCHSEDivFreq_Value=4000000
|
||||
RCC.SYSCLKFreq_VALUE=168000000
|
||||
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
|
||||
RCC.VCOI2SOutputFreq_Value=384000000
|
||||
RCC.VCOInputFreq_Value=2000000
|
||||
RCC.VCOOutputFreq_Value=336000000
|
||||
RCC.VcooutputI2S=192000000
|
||||
SH.ADCx_IN1.0=ADC1_IN1,IN1
|
||||
SH.ADCx_IN1.ConfNb=1
|
||||
SH.COMP_DAC1_group.0=DAC_OUT1,DAC_OUT1
|
||||
SH.COMP_DAC1_group.ConfNb=1
|
||||
SH.FSMC_A18.0=FSMC_A18,A18_1
|
||||
SH.FSMC_A18.ConfNb=1
|
||||
SH.FSMC_D0_DA0.0=FSMC_D0,8b-d1
|
||||
SH.FSMC_D0_DA0.ConfNb=1
|
||||
SH.FSMC_D1_DA1.0=FSMC_D1,8b-d1
|
||||
SH.FSMC_D1_DA1.ConfNb=1
|
||||
SH.FSMC_D2_DA2.0=FSMC_D2,8b-d1
|
||||
SH.FSMC_D2_DA2.ConfNb=1
|
||||
SH.FSMC_D3_DA3.0=FSMC_D3,8b-d1
|
||||
SH.FSMC_D3_DA3.ConfNb=1
|
||||
SH.FSMC_D4_DA4.0=FSMC_D4,8b-d1
|
||||
SH.FSMC_D4_DA4.ConfNb=1
|
||||
SH.FSMC_D5_DA5.0=FSMC_D5,8b-d1
|
||||
SH.FSMC_D5_DA5.ConfNb=1
|
||||
SH.FSMC_D6_DA6.0=FSMC_D6,8b-d1
|
||||
SH.FSMC_D6_DA6.ConfNb=1
|
||||
SH.FSMC_D7_DA7.0=FSMC_D7,8b-d1
|
||||
SH.FSMC_D7_DA7.ConfNb=1
|
||||
SH.FSMC_NOE.0=FSMC_NOE,Lcd1
|
||||
SH.FSMC_NOE.ConfNb=1
|
||||
SH.FSMC_NWE.0=FSMC_NWE,Lcd1
|
||||
SH.FSMC_NWE.ConfNb=1
|
||||
SH.S_TIM14_CH1.0=TIM14_CH1,PWM Generation1 CH1
|
||||
SH.S_TIM14_CH1.ConfNb=1
|
||||
SH.S_TIM1_CH2.0=TIM1_CH2,PWM Generation2 CH2
|
||||
SH.S_TIM1_CH2.ConfNb=1
|
||||
SH.S_TIM1_CH3.0=TIM1_CH3,PWM Generation3 CH3
|
||||
SH.S_TIM1_CH3.ConfNb=1
|
||||
SH.S_TIM2_CH3.0=TIM2_CH3,PWM Generation3 CH3
|
||||
SH.S_TIM2_CH3.ConfNb=1
|
||||
SH.S_TIM2_CH4.0=TIM2_CH4,PWM Generation4 CH4
|
||||
SH.S_TIM2_CH4.ConfNb=1
|
||||
SH.S_TIM3_CH2.0=TIM3_CH2,PWM Generation2 CH2
|
||||
SH.S_TIM3_CH2.ConfNb=1
|
||||
SH.S_TIM3_CH4.0=TIM3_CH4,PWM Generation4 CH4
|
||||
SH.S_TIM3_CH4.ConfNb=1
|
||||
SH.S_TIM4_CH1.0=TIM4_CH1,PWM Generation1 CH1
|
||||
SH.S_TIM4_CH1.ConfNb=1
|
||||
SPI2.CalculateBaudRate=21.0 MBits/s
|
||||
SPI2.Direction=SPI_DIRECTION_2LINES
|
||||
SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
|
||||
SPI2.Mode=SPI_MODE_MASTER
|
||||
SPI2.VirtualType=VM_MASTER
|
||||
TIM1.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
|
||||
TIM1.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
|
||||
TIM1.IPParameters=Channel-PWM Generation2 CH2,Channel-PWM Generation3 CH3
|
||||
TIM14.Channel=TIM_CHANNEL_1
|
||||
TIM14.IPParameters=Channel
|
||||
TIM2.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
|
||||
TIM2.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
|
||||
TIM2.IPParameters=Channel-PWM Generation3 CH3,Channel-PWM Generation4 CH4
|
||||
TIM3.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
|
||||
TIM3.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
|
||||
TIM3.IPParameters=Channel-PWM Generation4 CH4,Channel-PWM Generation2 CH2
|
||||
TIM4.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
|
||||
TIM4.IPParameters=Channel-PWM Generation1 CH1
|
||||
USART1.IPParameters=VirtualMode
|
||||
USART1.VirtualMode=VM_ASYNC
|
||||
USART2.IPParameters=VirtualMode
|
||||
USART2.VirtualMode=VM_ASYNC
|
||||
USB_OTG_FS.IPParameters=VirtualMode
|
||||
USB_OTG_FS.VirtualMode=Device_Only
|
||||
VP_IWDG_VS_IWDG.Mode=IWDG_Activate
|
||||
VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
|
||||
VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
|
||||
VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
|
||||
VP_SYS_VS_Systick.Mode=SysTick
|
||||
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
|
||||
VP_TIM11_VS_ClockSourceINT.Mode=Enable_Timer
|
||||
VP_TIM11_VS_ClockSourceINT.Signal=TIM11_VS_ClockSourceINT
|
||||
VP_TIM13_VS_ClockSourceINT.Mode=Enable_Timer
|
||||
VP_TIM13_VS_ClockSourceINT.Signal=TIM13_VS_ClockSourceINT
|
||||
VP_TIM14_VS_ClockSourceINT.Mode=Enable_Timer
|
||||
VP_TIM14_VS_ClockSourceINT.Signal=TIM14_VS_ClockSourceINT
|
||||
VP_TIM1_VS_ClockSourceINT.Mode=Internal
|
||||
VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT
|
||||
VP_TIM2_VS_ClockSourceINT.Mode=Internal
|
||||
VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
|
||||
VP_TIM3_VS_ClockSourceINT.Mode=Internal
|
||||
VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT
|
||||
board=custom
|
||||
92
board/CubeMX_Config/Inc/main.h
Normal file
92
board/CubeMX_Config/Inc/main.h
Normal file
@@ -0,0 +1,92 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.h
|
||||
* @brief : Header for main.c file.
|
||||
* This file contains the common defines of the application.
|
||||
******************************************************************************
|
||||
** This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* COPYRIGHT(c) 2018 STMicroelectronics
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __MAIN_H
|
||||
#define __MAIN_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void Error_Handler(void);
|
||||
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
/* Private defines -----------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __MAIN_H */
|
||||
495
board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h
Normal file
495
board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h
Normal file
@@ -0,0 +1,495 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_conf_template.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration template file.
|
||||
* This file should be copied to the application folder and renamed
|
||||
* to stm32f4xx_hal_conf.h.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_CONF_H
|
||||
#define __STM32F4xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
#define HAL_ADC_MODULE_ENABLED
|
||||
/* #define HAL_CAN_MODULE_ENABLED */
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
#define HAL_DAC_MODULE_ENABLED
|
||||
/* #define HAL_DCMI_MODULE_ENABLED */
|
||||
/* #define HAL_DMA2D_MODULE_ENABLED */
|
||||
/* #define HAL_ETH_MODULE_ENABLED */
|
||||
/* #define HAL_ETH_LEGACY_MODULE_ENABLED */
|
||||
/* #define HAL_NAND_MODULE_ENABLED */
|
||||
/* #define HAL_NOR_MODULE_ENABLED */
|
||||
/* #define HAL_PCCARD_MODULE_ENABLED */
|
||||
#define HAL_SRAM_MODULE_ENABLED
|
||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||
/* #define HAL_HASH_MODULE_ENABLED */
|
||||
/* #define HAL_I2C_MODULE_ENABLED */
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
#define HAL_IWDG_MODULE_ENABLED
|
||||
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||
/* #define HAL_RNG_MODULE_ENABLED */
|
||||
#define HAL_RTC_MODULE_ENABLED
|
||||
/* #define HAL_SAI_MODULE_ENABLED */
|
||||
#define HAL_SD_MODULE_ENABLED
|
||||
/* #define HAL_MMC_MODULE_ENABLED */
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
#define HAL_TIM_MODULE_ENABLED
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SMBUS_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
#define HAL_PCD_MODULE_ENABLED
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
/* #define HAL_DSI_MODULE_ENABLED */
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
/* #define HAL_CEC_MODULE_ENABLED */
|
||||
/* #define HAL_FMPI2C_MODULE_ENABLED */
|
||||
/* #define HAL_FMPSMBUS_MODULE_ENABLED */
|
||||
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
||||
/* #define HAL_DFSDM_MODULE_ENABLED */
|
||||
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External audio frequency in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
|
||||
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
|
||||
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
|
||||
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */
|
||||
#define USE_HAL_FMPSMBUS_REGISTER_CALLBACKS 0U /* FMPSMBUS register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
|
||||
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
|
||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848_PHY_ADDRESS Address*/
|
||||
#define DP83848_PHY_ADDRESS
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY 0x000000FFU
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||
|
||||
#define PHY_READ_TO 0x0000FFFFU
|
||||
#define PHY_WRITE_TO 0x0000FFFFU
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
#define PHY_SR ((uint16_t)) /*!< PHY status register Offset */
|
||||
|
||||
#define PHY_SPEED_STATUS ((uint16_t)) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)) /*!< PHY Duplex mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 0U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_LEGACY_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_eth_legacy.h"
|
||||
#endif /* HAL_ETH_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sdram.h"
|
||||
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DSI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dsi.h"
|
||||
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FMPI2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_fmpi2c.h"
|
||||
#endif /* HAL_FMPI2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FMPSMBUS_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_fmpsmbus.h"
|
||||
#endif /* HAL_FMPSMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spdifrx.h"
|
||||
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_CONF_H */
|
||||
84
board/CubeMX_Config/Inc/stm32f4xx_it.h
Normal file
84
board/CubeMX_Config/Inc/stm32f4xx_it.h
Normal file
@@ -0,0 +1,84 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_it.h
|
||||
* @brief This file contains the headers of the interrupt handlers.
|
||||
******************************************************************************
|
||||
*
|
||||
* COPYRIGHT(c) 2018 STMicroelectronics
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_IT_H
|
||||
#define __STM32F4xx_IT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN ET */
|
||||
|
||||
/* USER CODE END ET */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EC */
|
||||
|
||||
/* USER CODE END EC */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN EM */
|
||||
|
||||
/* USER CODE END EM */
|
||||
|
||||
/* Exported functions prototypes ---------------------------------------------*/
|
||||
void NMI_Handler(void);
|
||||
void HardFault_Handler(void);
|
||||
void MemManage_Handler(void);
|
||||
void BusFault_Handler(void);
|
||||
void UsageFault_Handler(void);
|
||||
void SVC_Handler(void);
|
||||
void DebugMon_Handler(void);
|
||||
void PendSV_Handler(void);
|
||||
void SysTick_Handler(void);
|
||||
void USART1_IRQHandler(void);
|
||||
void OTG_FS_IRQHandler(void);
|
||||
/* USER CODE BEGIN EFP */
|
||||
|
||||
/* USER CODE END EFP */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_IT_H */
|
||||
1103
board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
Normal file
1103
board/CubeMX_Config/Src/stm32f4xx_hal_msp.c
Normal file
File diff suppressed because it is too large
Load Diff
246
board/CubeMX_Config/Src/stm32f4xx_it.c
Normal file
246
board/CubeMX_Config/Src/stm32f4xx_it.c
Normal file
@@ -0,0 +1,246 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_it.c
|
||||
* @brief Interrupt Service Routines.
|
||||
******************************************************************************
|
||||
*
|
||||
* COPYRIGHT(c) 2018 STMicroelectronics
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "stm32f4xx_it.h"
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN TD */
|
||||
|
||||
/* USER CODE END TD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PV */
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN PFP */
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private user code ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
extern UART_HandleTypeDef huart1;
|
||||
extern PCD_HandleTypeDef hpcd_USB_OTG_FS;
|
||||
/* USER CODE BEGIN EV */
|
||||
|
||||
/* USER CODE END EV */
|
||||
|
||||
/******************************************************************************/
|
||||
/* Cortex-M4 Processor Interruption and Exception Handlers */
|
||||
/******************************************************************************/
|
||||
/**
|
||||
* @brief This function handles Non maskable interrupt.
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Hard fault interrupt.
|
||||
*/
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END HardFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Memory management fault.
|
||||
*/
|
||||
void MemManage_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||
|
||||
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pre-fetch fault, memory access fault.
|
||||
*/
|
||||
void BusFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END BusFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Undefined instruction or illegal state.
|
||||
*/
|
||||
void UsageFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||
|
||||
/* USER CODE END UsageFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System service call via SWI instruction.
|
||||
*/
|
||||
void SVC_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SVCall_IRQn 0 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 0 */
|
||||
/* USER CODE BEGIN SVCall_IRQn 1 */
|
||||
|
||||
/* USER CODE END SVCall_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Debug monitor.
|
||||
*/
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pendable request for system service.
|
||||
*/
|
||||
void PendSV_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN PendSV_IRQn 0 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 0 */
|
||||
/* USER CODE BEGIN PendSV_IRQn 1 */
|
||||
|
||||
/* USER CODE END PendSV_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System tick timer.
|
||||
*/
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 0 */
|
||||
HAL_IncTick();
|
||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 1 */
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* STM32F4xx Peripheral Interrupt Handlers */
|
||||
/* Add here the Interrupt Handlers for the used peripherals. */
|
||||
/* For the available peripheral interrupt handler names, */
|
||||
/* please refer to the startup file (startup_stm32f4xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @brief This function handles USART1 global interrupt.
|
||||
*/
|
||||
void USART1_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN USART1_IRQn 0 */
|
||||
|
||||
/* USER CODE END USART1_IRQn 0 */
|
||||
HAL_UART_IRQHandler(&huart1);
|
||||
/* USER CODE BEGIN USART1_IRQn 1 */
|
||||
|
||||
/* USER CODE END USART1_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles USB On The Go FS global interrupt.
|
||||
*/
|
||||
void OTG_FS_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN OTG_FS_IRQn 0 */
|
||||
//You can open usb device or usb host, but open both of them is fatal error.
|
||||
/* USER CODE END OTG_FS_IRQn 0 */
|
||||
HAL_PCD_IRQHandler(&hpcd_USB_OTG_FS);
|
||||
/* USER CODE BEGIN OTG_FS_IRQn 1 */
|
||||
|
||||
/* USER CODE END OTG_FS_IRQn 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
Reference in New Issue
Block a user